No functional changes, just change the name of this
function pointer to be more generic.
BAPM refers to a specific feature on KV, but other kinds of
ASICs may also need the SMU to be notified on AC/DC changes.
Also remove the argument and use adev->pm.ac_power instead.
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
When no displays are connected, there is no vblank
happening so the power management code shouldn't
worry about it.
This fixes a regression that caused the memory clock
to be stuck at maximum when there were no displays
connected to a SI GPU.
Fixes: 9003a07468 ("drm/amd/pm: Treat zero vblank time as too short in si_dpm (v3)")
Fixes: 9d73b107a6 ("drm/amd/pm: Use pm_display_cfg in legacy DPM (v2)")
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Tested-by: Jeremy Klarenbeek <jeremy.klarenbeek99@gmail.com>
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Not used and not needed anymore.
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Reviewed-by: Melissa Wen <mwen@igalia.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Not needed anymore.
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Reviewed-by: Melissa Wen <mwen@igalia.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
It was not used by anything anymore.
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Reviewed-by: Melissa Wen <mwen@igalia.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This function was effectively a no-op because it always
returned the maximum possible power level, because the
maximum voltage is in millivolts while the dependency
table didn't contain actual voltages.
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Reviewed-by: Melissa Wen <mwen@igalia.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
These implementations did not actually return
the DAL power level, so they were effectively
a no-op.
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Reviewed-by: Melissa Wen <mwen@igalia.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Was not called from anywhere.
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Reviewed-by: Melissa Wen <mwen@igalia.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
It isn't used by anything anymore.
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Reviewed-by: Melissa Wen <mwen@igalia.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Only DCE 11.0 relies on this information and even that
didn't use this field, because it queries the information
from the pplib. It also filled the field incorrectly on
that version.
On newer GPUs, the VIOS integrated info no longer contains
display clock voltage dependencies, so we don't need it.
v2:
- Also delete some code wrapped in #if 0
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Reviewed-by: Melissa Wen <mwen@igalia.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
It was not used by anything anymore.
Note that the parts of DC that need this information actually
already query it from the pplib and don't use the hardcoded
information from max_clks_by_state.
v2:
- Also delete state_dependent_clocks
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Reviewed-by: Melissa Wen <mwen@igalia.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The max_clks_by_state was based on hardcoded values, which are
not really used anywhere, only to know the maximum clock.
Just hardcode the same maximum clock for each DCE version.
v2:
- Use previous max display clock for DCE 11.2
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Reviewed-by: Melissa Wen <mwen@igalia.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
It's not used by anything anymore.
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Reviewed-by: Melissa Wen <mwen@igalia.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
These fields are not used by anything anymore.
v2:
- Delete dm_pp_get_static_clocks()
- Delete pp_to_dc_powerlevel_state()
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Reviewed-by: Melissa Wen <mwen@igalia.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
It is not called from anywhere anymore.
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Reviewed-by: Melissa Wen <mwen@igalia.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
CRIU restore ioctls are meant to be called by CRIU with no
existing drm file. There's an error path
for if the drm file unexpectedly exists. It was positioned so
it was missing a fput(drm_file).
Do that check earlier, as soon as we have the pdd.
Signed-off-by: David Francis <David.Francis@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Use snprintf() with sizeof(fs_info.debugfs_name) so a long RAS block
name plus the "_err_inject" suffix cannot overflow the 32-byte buffer.
Signed-off-by: Stanley.Yang <Stanley.Yang@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Thread 1: Running amdgpu_userq_destroy which eventually remove
the queue from door bell and set userq_mgr = NULL.
Thread2: An interrupt might have scheduled the hang_detect_work
which still need userq_mgr to be valid but could get an NULL
ptrs.
To fix that make sure we cancel the hang_detect_work again before
setting userq_mgr to NULL.
Along with that we also need all the queue va to remain valid till
we could be running anything on the queue and hence moving the
userq_va post hang_detect handler is cancelled.
Signed-off-by: Sunil Khatri <sunil.khatri@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fix the code to make it an uninterruptible reservation
for root bo.
Signed-off-by: Sunil Khatri <sunil.khatri@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Unpin the wptr_obj->obj when amdgpu_ttm_alloc_gart fails.
Signed-off-by: Sunil Khatri <sunil.khatri@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
amdgpu_userq_get_doorbell_index returns a uint64 type index
as well as a int type failure values. Simplifying this and
using a int type return value and getting the index in input pointer
of type uint64 type.
Also since it's used at once place making it static would be better.
Signed-off-by: Sunil Khatri <sunil.khatri@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The process_info could be NULL if user doesn't call kfd_ioctl_acquire_vm
before calling kfd_ioctl_svm.
Signed-off-by: Eric Huang <jinhuieric.huang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why&How]
dccg21_init() calls dccg2_init() which hardcodes 100MHz refclk values
for MICROSECOND_TIME_BASE_DIV and MILLISECOND_TIME_BASE_DIV. DCN21
uses 48MHz refclk, so the wrong values corrupt DCCG timing and cause eDP
link training failure on cold boot.
Write the correct 48MHz values directly instead of calling dccg2_init().
v2:
Fixed typo
Fixes: e6e2b956fc ("drm/amd/display: Add missing DCCG register entries for DCN20-DCN316")
Reported-by: Max Chernoff <git@maxchernoff.ca>
Tested-by: Max Chernoff <git@maxchernoff.ca>
Signed-off-by: Ivan Lipski <ivan.lipski@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
mutex fence_drv_lock is destroyed in amdgpu_userq_fence_driver_free
also in one of the jump condition mutex_destroy is also called leading
to double mutex_destroy.
So rearranging the code so amdgpu_userq_fence_driver_free takes care
of the clean up along with mutex_destroy.
Signed-off-by: Sunil Khatri <sunil.khatri@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
dm_pp_apply_power_level_change_request() was called from old
DCE clock manager implementations on DCE6, 8, 10, 11.2
but has not been implemented ever since the beginning of DC.
Affected GPUs have been working fine without that implementation
for many years. Let's delete it now.
v2:
- Delete dm_pp_apply_power_level_change_request too
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Reviewed-by: Melissa Wen <mwen@igalia.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Unpin and unref the door bell obj if queue creation fails before
initialization is complete.
Signed-off-by: Sunil Khatri <sunil.khatri@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This patch continues the effort to refactor workqueue APIs, which has begun
with the changes introducing new workqueues and a new alloc_workqueue flag:
commit 128ea9f6cc ("workqueue: Add system_percpu_wq and system_dfl_wq")
commit 930c2ea566 ("workqueue: Add new WQ_PERCPU flag")
The point of the refactoring is to eventually alter the default behavior of
workqueues to become unbound by default so that their workload placement is
optimized by the scheduler.
Before that to happen, workqueue users must be converted to the better named
new workqueues with no intended behaviour changes:
system_wq -> system_percpu_wq
system_unbound_wq -> system_dfl_wq
This way the old obsolete workqueues (system_wq, system_unbound_wq) can be
removed in the future.
Link: https://lore.kernel.org/all/20250221112003.1dSuoGyc@linutronix.de/
Suggested-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Marco Crivellari <marco.crivellari@suse.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This patch continues the effort to refactor workqueue APIs, which has begun
with the changes introducing new workqueues and a new alloc_workqueue flag:
commit 128ea9f6cc ("workqueue: Add system_percpu_wq and system_dfl_wq")
commit 930c2ea566 ("workqueue: Add new WQ_PERCPU flag")
The point of the refactoring is to eventually alter the default behavior of
workqueues to become unbound by default so that their workload placement is
optimized by the scheduler.
Before that to happen, workqueue users must be converted to the better named
new workqueues with no intended behaviour changes:
system_wq -> system_percpu_wq
system_unbound_wq -> system_dfl_wq
This way the old obsolete workqueues (system_wq, system_unbound_wq) can be
removed in the future.
Cc: Ray Wu <ray.wu@amd.com>
Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Leo Li <sunpeng.li@amd.com>
Cc: Rodrigo Siqueira <siqueira@igalia.com>
Link: https://lore.kernel.org/all/20250221112003.1dSuoGyc@linutronix.de/
Suggested-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Marco Crivellari <marco.crivellari@suse.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
kvcalloc(args->num_entries, sizeof(*vm_entries), GFP_KERNEL) at
amdgpu_gem.c:1050 uses the user-supplied num_entries directly without
any upper bounds check. Since num_entries is a __u32 and
sizeof(drm_amdgpu_gem_vm_entry) is 32 bytes, a large num_entries
produces an allocation exceeding INT_MAX, triggering
WARNING in __kvmalloc_node_noprof(), causing a kernel WARNING,
TAINT_WARN, and panic on CONFIG_PANIC_ON_WARN=y systems.
Add a size bounds check before we invoke the kvzalloc() to
reject oversized num_entries early with -EINVAL.
Fixes: 4d82724f7f ("drm/amdgpu: Add mapping info option for GEM_OP ioctl")
Signed-off-by: Ziyi Guo <n7l8m4@u.northwestern.edu>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The AMDGPU_GEM_OP_GET_MAPPING_INFO branch of amdgpu_gem_op_ioctl()
holds three cleanup-tracked resources before calling kvcalloc():
the drm_gem_object reference from drm_gem_object_lookup(), the
drm_exec lock on the looked-up GEM via drm_exec_lock_obj(), and
the drm_exec lock on the per-process VM root page directory via
amdgpu_vm_lock_pd(). All three are released by the out_exec
label that every other error path in this function jumps to.
The kvcalloc() failure path returns -ENOMEM directly, skipping
out_exec and leaking all three.
The leaked per-process VM root PD dma_resv lock is the
load-bearing leak: any subsequent operation on the same VM
(further GEM ops, command-submission, eviction, TTM shrinker
callbacks) blocks on the held lock. DRM_IOCTL_AMDGPU_GEM_OP is
DRM_AUTH | DRM_RENDER_ALLOW, so this is an unprivileged-local
denial of service against the caller's GPU context, reachable
by any process with /dev/dri/renderD* access.
Route the failure through out_exec so drm_exec_fini() and
drm_gem_object_put() run.
Reproduced on stock 7.0.0-10, Ryzen 7 5700U / Radeon Vega
(Lucienne): the failing ioctl returns -ENOMEM and a second
GET_MAPPING_INFO on the same fd then blocks in
drm_exec_lock_obj() on the leaked dma_resv. SIGKILL on the
caller does not reap the task; the fd-release path during
process exit goes through amdgpu_gem_object_close() ->
drm_exec_prepare_obj() on the same lock, leaving the task in D
state until the box is rebooted. The patched kernel was not
rebuilt and re-tested on this hardware; the fix is mechanical.
Tested on a single Lucienne / Vega box only.
Ziyi Guo posted an independent INT_MAX-bound check for
args->num_entries in the same branch [1]; the two patches are
complementary and can land in either order.
Fixes: 4d82724f7f ("drm/amdgpu: Add mapping info option for GEM_OP ioctl")
Link: https://lore.kernel.org/all/20260208000255.4073363-1-n7l8m4@u.northwestern.edu/ # [1]
Signed-off-by: Michael Bommarito <michael.bommarito@gmail.com>
Assisted-by: Claude:claude-opus-4-7
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
With CONFIG_DRM_AMD_DC_KUNIT_TEST=m, allmodconfig only defines the
_MODULE variant. Four KUnit helper headers gate their declarations
with #ifdef CONFIG_DRM_AMD_DC_KUNIT_TEST, so the declarations vanish
while the matching .c files (driven by IS_ENABLED() via
STATIC_IFN_KUNIT) keep the functions non-static. The build breaks
with implicit declarations and -Werror=missing-prototypes.
amdgpu_dm_crc.h additionally uses symbols that its test file does not
pull in indirectly, amdgpu_dm_colorop_test.c has a copy-paste
duplicate function with the wrong expected bitmask, and the three
colorop TF bitmasks are not exported for modpost.
[How]
- Switch the crc/hdcp/color/psr KUnit guards to IS_ENABLED().
- Make amdgpu_dm_crc.h self-contained (dc_types.h + forward decl).
- Rename the duplicated shaper test back to its intended name and
fix its expected bitmask.
- Export amdgpu_dm_supported_{degam,shaper,blnd}_tfs via
EXPORT_IF_KUNIT().
Assisted-by: Copilot:claude-4-opus
Reviewed-by: Alex Hung <alex.hung@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Ray Wu <ray.wu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
cpu_data().topo.apicid and kfd_fill_iolink_info_for_cpu() rely on
x86-specific structs not present on UML. The kfd_topology.c and
kfd_crat.c were guarded by CONFIG_X86_64 alone, causing build
failures when CONFIG_DRM_AMDGPU is selected on UML.
Update guards to '#if defined(CONFIG_X86_64) && !defined(CONFIG_UML)'
to ensure x86_64-only paths are excluded on UML builds.
Fixes: af3f2f5db2 ("drm/amdgpu: Remove UML build exclusion from Kconfig")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202605140506.TI8zPIBG-lkp@intel.com/
Cc: Harry Wentland <harry.wentland@amd.com>
Assisted-by: Copilot:Claude-Sonnet-4.6
Reviewed-by: Felix Kuehling <felix.kuehling@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add KUnit tests for three static functions in amdgpu_dm_ism.c:
dm_ism_next_state, dm_ism_get_sso_delay, and
dm_ism_get_idle_allow_delay.
The 32 test cases cover the full FSM transition table,
SSO delay calculation with various timings, and
hysteresis-based idle allow delay including circular
buffer wraparound and old history cutoff logic.
Conditionally remove static linkage and export the three
functions under CONFIG_DRM_AMD_DC_KUNIT_TEST so the test
module can call them.
Assisted-by: Copilot:Claude-Opus-4.6
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Ivan Lipski <ivan.lipski@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add KUnit tests for amdgpu_dm_link_supports_replay() which
validates panel replay capability based on link DPCD caps,
freesync state, and VSDB info. Nine test cases cover the
positive path and each individual failure condition.
Export the function under CONFIG_DRM_AMD_DC_KUNIT_TEST and
add the amdgpu include path to the tests Makefile so that
amdgpu_dm.h can resolve amdgpu_mode.h types under UML.
Assisted-by: Copilot:Claude-Opus-4.6
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Ivan Lipski <ivan.lipski@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add KUnit tests for amdgpu_dm_psr_fill_caps() which
validates PSR capability population from DPCD data.
Export amdgpu_dm_psr_fill_caps() conditionally when
CONFIG_DRM_AMD_DC_KUNIT_TEST is enabled, following the
existing pattern used by CRC and HDCP test files.
The test covers PSR version mapping, RFB setup time
calculation, link training flag, DPCD field passthrough,
rate control caps, and power optimization flags.
Assisted-by: Copilot:Claude-Opus-4.6
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Ivan Lipski <ivan.lipski@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add KUnit tests for six pure-logic functions in
amdgpu_dm_color.c: amdgpu_dm_fixpt_from_s3132,
__is_lut_linear, __drm_ctm_to_dc_matrix,
__drm_ctm_3x4_to_dc_matrix, amdgpu_tf_to_dc_tf,
and amdgpu_colorop_tf_to_dc_tf.
Expose these static functions under CONFIG_DRM_AMD_DC_KUNIT_TEST
and add a new amdgpu_dm_color.h header with the KUnit-only
prototypes. The test file re-declares the dc and amdgpu
transfer function enums locally to avoid pulling in the full
DC/amdgpu include chain that fails under UML.
26 test cases cover signed-magnitude to two's complement
conversion, LUT linearity detection, CTM-to-DC matrix
conversion, and transfer function enum mapping.
Assisted-by: Copilot:Claude-Opus-4.6
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Ivan Lipski <ivan.lipski@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add KUnit tests that verify the three supported transfer
function bitmask constants exported by amdgpu_dm_colorop.c:
amdgpu_dm_supported_degam_tfs, amdgpu_dm_supported_shaper_tfs,
and amdgpu_dm_supported_blnd_tfs.
Each bitmask is tested for presence of each expected curve
flag and absence of any unexpected bits. A cross-check
confirms that degam and blnd bitmasks are identical.
amdgpu_dm_initialize_default_pipeline() is not tested
because it needs a fully initialised drm_plane backed by
an amdgpu_device with DC color caps.
Assisted-by: Copilot:Claude-Opus-4.6
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Ivan Lipski <ivan.lipski@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Expose process_output() as non-static when CONFIG_DRM_AMD_DC_KUNIT_TEST
is enabled and add KUnit tests exercising its full branch logic:
- property_validate_dwork is always enqueued (delay=0)
- callback_dwork is scheduled when callback_needed is set
- callback_dwork is cancelled when callback_stop is set
- watchdog_timer_dwork is scheduled when watchdog_timer_needed is set
- watchdog_timer_dwork is cancelled when watchdog_timer_stop is set
- Both dworks are scheduled independently when both flags are set
Assisted-by: Copilot:Claude-Sonnet-4.6
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Ivan Lipski <ivan.lipski@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
DM CRC parsing functions are an easy candidate for exploring the use of
KUnit unit-testing frameworks. Add a few tests for the same.
The test file and .kunitconfig are placed under amdgpu_dm/tests/ to
follow the convention of keeping test code separate from production
sources.
Assisted-by: Copilot:Claude-Opus-4.6
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Ivan Lipski <ivan.lipski@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Instead of coming up with more sophisticated names for states a VM BO
can be in, group them by the type of BO first and then by the state.
So we end with BO type kernel, always_valid and individual and then states
evicted, moved and idle.
Not much functional change, except that evicted_user is moved back
together with the other BOs again which makes the handling in
amdgpu_vm_validate() a bit more complex.
Also fixes a problem with user queues and amdgpu_vm_ready(). We didn't
considered the VM ready when user BOs were not ideally placed, harmless
performance impact for kernel queues but a complete show stopper for
userqueues.
v2: fix a few typos in comments, rename the BO types to make them more
descriptive, fix a couple of bugs found during testing
v3: squashed together with revert to old status lock handling, looks
like the first patch still had some bug which this one here should fix.
Fix a missing lock around debugfs printing.
v4: fix merge clash pointed out by Prike
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Sunil Khatri <sunil.khatri@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
return error when converting records to nps pages fails
Signed-off-by: Gangliang Xie <ganglxie@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
check the upper and lower limits of first record offset
Signed-off-by: Gangliang Xie <ganglxie@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Check and drop invalid bad page records.
Signed-off-by: YiPeng Chai <YiPeng.Chai@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
When generating ras cper file, the original data nodes in the ras
log ring buffer may be deleted, leading to invalid pointer
access. Copy the data from the ras log ring instead of directly
referencing the pointers to avoid this issue.
Signed-off-by: YiPeng Chai <YiPeng.Chai@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Change psp_copy_fw from void to int: return -ENODEV when drm_dev_enter
fails, and -EINVAL when the image size is zero or larger than the
1 MiB PSP private buffer.
Replace open-coded memset/memcpy into fw_pri_buf with psp_copy_fw.
Signed-off-by: Candice Li <candice.li@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Well mostly the same issues the other code had as well:
1. Memory allocation while holding the userq_mutex lock is forbidden!
2. Things were created/started/published in the wrong order.
3. The reset lock was taken in the wrong order and seems to be
unecessary in the first place.
4. Error messages on invalid input parameters can spam the logs.
5. Error messages on memory allocation failures are usually superflous
as well.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Sunil Khatri <sunil.khatri@amd.com>
Reviewed-by: Prike Liang <Prike.Liang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
