This commit updates described non-existent parameters 'resv' and
'sync_mode', and failed to describe the existing 'sync' parameter.
Fixes the below with gcc W=1:
drivers/gpu/drm/amd/amdgpu/amdgpu_vm_cpu.c:50: warning: Function parameter or struct member 'sync' not described in 'amdgpu_vm_cpu_prepare'
drivers/gpu/drm/amd/amdgpu/amdgpu_vm_cpu.c:50: warning: Excess function parameter 'resv' description in 'amdgpu_vm_cpu_prepare'
drivers/gpu/drm/amd/amdgpu/amdgpu_vm_cpu.c:50: warning: Excess function parameter 'sync_mode' description in 'amdgpu_vm_cpu_prepare'
Cc: Christian König <christian.koenig@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Similar to jpeg_v2_dec_ring_parse_cs() but it has different
register ranges and a few other registers access.
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: David (Ming Qiang) Wu <David.Wu3@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This patch extends the same cs parser from JPEG v4.0.3 to
other JPEG versions (v2 and above).
Rename to more common name as jpeg_v2_dec_ring_parse_cs()
from jpeg_v4_0_3_dec_ring_parse_cs().
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: David (Ming Qiang) Wu <David.Wu3@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
fix the pp_dpm_pcie issue on smu v14.0.2/3 as below:
0: 2.5GT/s, x4 250Mhz
1: 8.0GT/s, x4 616Mhz *
2: 8.0GT/s, x4 1143Mhz *
the middle level can be removed since it is always skipped on
smu v14.0.2/3
Signed-off-by: Kenneth Feng <kenneth.feng@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
update the features set on smu v14.0.2/3
Signed-off-by: Kenneth Feng <kenneth.feng@amd.com>
Reviewed-by: Yang Wang <kevinyang.wang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
To avoid memory leaks, release q_extra_data when exiting the restore queue.
v2: Correct the proto (Alex)
Signed-off-by: Jesse Zhang <jesse.zhang@amd.com>
Reviewed-by: Tim Huang <tim.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
drm_normalize_zpos will set the crtc_state->zpos_changed to 1 if any of
it's assigned planes changes zpos, or is removed/added from it.
To have amdgpu_dm request a plane reset on this is too broad. For
example, if only the cursor plane was moved from one crtc to another,
the crtc's zpos_changed will be set to true. But that does not mean that
the underlying primary plane requires a reset.
[How]
Narrow it down so that only the plane that has a change in zpos will
require a reset.
As a future TODO, we can further optimize this by only requiring a reset
on z-order change. Z-order is different from z-pos, since a zpos change
doesn't necessarily mean the z-ordering changed, and DC should only
require a reset if the z-ordering changed.
For example, the following zpos update does not change z-ordering:
Plane A: zpos 2 -> 3
Plane B: zpos 1 -> 2
=> Plane A is still on top of plane B: no reset needed
Whereas this one does change z-ordering:
Plane A: zpos 2 -> 1
Plane B: zpos 1 -> 2
=> Plane A changed from on top, to below plane B: reset needed
Fixes: 38e0c3df6d ("drm/amd/display: Move PRIMARY plane zpos higher")
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/3569
Signed-off-by: Leo Li <sunpeng.li@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Since commit a61ddb4393 ("drm: enable (most) W=1 warnings by default
across the subsystem"), most of the extra warnings in the driver
Makefile are redundant. Remove them.
Note that -Wmissing-declarations and -Wmissing-prototypes are always
enabled by default in scripts/Makefile.extrawarn.
Reviewed-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
That is clearly not something we should do upstream. The SDMA is
mandatory for the driver to work correctly.
We could do this for emulation and bringup, but in those cases the
engineer should probably enabled CPU based updates manually.
This reverts commit 62eefd10ac.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Yifan Zhang <yifan1.zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Indent the "break" statement one more tab.
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Document how to use SMI system management interface to enable and
receive SVM events. Document SVM event triggers.
Define SVM events message string format macro that could be used by user
mode for sscanf to parse the event. Add it to uAPI header file to make
it obvious that is changing uAPI in future.
No functional changes.
Signed-off-by: Philip Yang <Philip.Yang@amd.com>
Reviewed-by: James Zhu <James.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Driver mode-2 is only supported by relative new
smc firmware.
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
If a queue is being destroyed but causes a HWS hang on removal, the KFD
may issue an unnecessary gpu reset if the destroyed queue can be fixed
by a queue reset.
This is because the queue has been removed from the KFD's queue list
prior to the preemption action on destroy so the reset call will fail to
match the HQD PQ reset information against the KFD's queue record to do
the actual reset.
To fix this, deactivate the queue prior to preemption since it's being
destroyed anyways and remove the queue from the KFD's queue list after
preemption.
Signed-off-by: Jonathan Kim <jonathan.kim@amd.com>
Reviewed-by: Felix Kuehling <felix.kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Enables users to update SVM's default granularity, used in
buffer migration and handling of recoverable page faults.
Param value is set in terms of log(numPages(buffer)),
e.g. 9 for a 2 MIB buffer
Signed-off-by: Ramesh Errabolu <Ramesh.Errabolu@amd.com>
Reviewed-by: Philip Yang <Philip.Yang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Initialize the queue type before resetting the queue using mmio.
Signed-off-by: Jesse Zhang <jesse.zhang@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Added a descriptor for the 'program_isharp_1dlut' parameter, which is a
flag used to determine whether to program the isharp 1D LUT.
Fixes the below with gcc W=1:
drivers/gpu/drm/amd/amdgpu/../display/dc/dpp/dcn401/dcn401_dpp_dscl.c:963: warning: Function parameter or struct member 'program_isharp_1dlut' not described in 'dpp401_dscl_program_isharp'
Cc: Tom Chung <chiahsuan.chung@amd.com>
Cc: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Cc: Roman Li <roman.li@amd.com>
Cc: Alex Hung <alex.hung@amd.com>
Cc: Aurabindo Pillai <aurabindo.pillai@amd.com>
Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This commit replaces the use of amdgpu_job_submit_direct which submits
the job to the ring directly, with drm_sched_entity in the cleaner
shader job submission process. The change allows the GPU scheduler to
manage the cleaner shader job.
- The job is then submitted to the GPU using the
drm_sched_entity_push_job function, which allows the GPU scheduler to
manage the job.
This change improves the reliability of the cleaner shader job
submission process by leveraging the capabilities of the GPU scheduler.
Fixes: d361ad5d2f ("drm/amdgpu: Add sysfs interface for running cleaner shader")
Cc: Christian König <christian.koenig@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Suggested-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This commit adds a description for the 'ts' parameter in the
amdgpu_vm_handle_fault function's comment block.
Fixes the below with gcc W=1:
drivers/gpu/drm/amd/amdgpu/amdgpu_vm.c:2781: warning: Function parameter or struct member 'ts' not described in 'amdgpu_vm_handle_fault'
Cc: Xiaogang.Chen <Xiaogang.Chen@amd.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202408251419.vgZHg3GV-lkp@intel.com/
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Xiaogang Chen <Xiaogang.Chen@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
enable dpp rcg before we disable dppclk in hw_init cause system
hang/reboot
[How]
we remove dccg rcg related code from init into a separate function and
call it after we init pipe
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Qili Lu <qili.lu@amd.com>
Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Function used to check the number of FEs connected to the current BE.
This was then used to determine if the symclk could be disabled, if
all FEs were disconnected. However, the function would skip over the
primary FE and return 0 when the primary FE was still connected. This
caused black screens on driver disable with an MST daisy chain hooked
up.
[How]
Refactor the function to correctly return the number of FEs connected
to the input BE. Also, rename it for clarity.
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Nicholas Susanto <Nicholas.Susanto@amd.com>
Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
On VFs and SOCs with GC 9.4.4, VCN RRMT is disabled.
Only local register offsets should be used on JPEG v4.0.3 as they cannot
handle remote access to other AIDs. Since only local offsets are used,
the special write to MCM_ADDR register is no longer needed.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Sathishkumar S <sathishkumar.sundararaju@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
dc_state_destruct() nulls the resource context of the DC state. The pipe
context passed to dcn35_set_drr() is a member of this resource context.
If dc_state_destruct() is called parallel to the IRQ processing (which
calls dcn35_set_drr() at some point), we can end up using already nulled
function callback fields of struct stream_resource.
The logic in dcn35_set_drr() already tries to avoid this, by checking tg
against NULL. But if the nulling happens exactly after the NULL check and
before the next access, then we get a race.
Avoid this by copying tg first to a local variable, and then use this
variable for all the operations. This should work, as long as nobody
frees the resource pool where the timing generators live.
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/3142
Fixes: 06ad7e1642 ("drm/amd/display: Destroy DC context while keeping DML and DML2")
Signed-off-by: Tobias Jakobi <tjakobi@math.uni-bielefeld.de>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
dc_state_destruct() nulls the resource context of the DC state. The pipe
context passed to dcn10_set_drr() is a member of this resource context.
If dc_state_destruct() is called parallel to the IRQ processing (which
calls dcn10_set_drr() at some point), we can end up using already nulled
function callback fields of struct stream_resource.
The logic in dcn10_set_drr() already tries to avoid this, by checking tg
against NULL. But if the nulling happens exactly after the NULL check and
before the next access, then we get a race.
Avoid this by copying tg first to a local variable, and then use this
variable for all the operations. This should work, as long as nobody
frees the resource pool where the timing generators live.
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/3142
Fixes: 06ad7e1642 ("drm/amd/display: Destroy DC context while keeping DML and DML2")
Signed-off-by: Tobias Jakobi <tjakobi@math.uni-bielefeld.de>
Tested-by: Raoul van Rüschen <raoul.van.rueschen@gmail.com>
Tested-by: Christopher Snowhill <chris@kode54.net>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Tested-by: Sefa Eyeoglu <contact@scrumplex.net>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
When it needs to get a value within a certain interval, using clamp()
makes the code easier to understand than min(max()).
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Li Zetao <lizetao1@huawei.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
When it needs to get a value within a certain interval, using clamp()
makes the code easier to understand than min(max()).
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Li Zetao <lizetao1@huawei.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Enabling gfxoff quirk results in perfectly usable
graphical user interface on HP 705G4 DM with R5 2400G.
Without the quirk, X server is completely unusable as
every few seconds there is gpu reset due to ring gfx timeout.
Signed-off-by: Peng Liu <liupeng01@kylinos.cn>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fix screen corruption with openkylin.
Link: https://bbs.openkylin.top/t/topic/171497
Signed-off-by: Peng Liu <liupeng01@kylinos.cn>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
There is a spelling mistake in a DRM_DEBUG_DRIVER message. Fix it.
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Populate cache line size info in topology based on information from IP
discovery table.
Signed-off-by: David Belanger <david.belanger@amd.com>
Reviewed-by: Sreekant Somasekharan <Sreekant.Somasekharan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This commit addresses a missing kdoc for the 'bs_coeffs_updated'
parameter in the 'dpp401_dscl_program_isharp' function. The
'bs_coeffs_updated' is a flag indicating whether the Blur and Scale
Coefficients have been updated.
The 'dpp401_dscl_program_isharp' function is responsible for programming
the isharp, which includes setting the isharp filter, noise gain, and
blur and scale coefficients. If the 'bs_coeffs_updated' flag is set to
true, the function updates the blur and scale coefficients.
Fixes the below with gcc W=1:
drivers/gpu/drm/amd/amdgpu/../display/dc/dpp/dcn401/dcn401_dpp_dscl.c:961: warning: Function parameter or struct member 'bs_coeffs_updated' not described in 'dpp401_dscl_program_isharp'
Cc: Tom Chung <chiahsuan.chung@amd.com>
Cc: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Cc: Roman Li <roman.li@amd.com>
Cc: Alex Hung <alex.hung@amd.com>
Cc: Aurabindo Pillai <aurabindo.pillai@amd.com>
Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Suggested-by: Tom Chung <chiahsuan.chung@amd.com>
Reviewed-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
CPU based update doesn't produce a fence, handle such cases properly.
Fixes: d8a3f0a034 ("drm/amdgpu: implement TLB flush fence")
Signed-off-by: Lang Yu <lang.yu@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Rework how VM operations synchronize to submissions. Provide an
amdgpu_sync container to the backends instead of an reservation
object and fill in the amdgpu_sync object in the higher layers
of the code.
No intended functional change, just prepares for upcomming changes.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Friedrich Vock <friedrich.vock@gmx.de>
Acked-by: Felix Kuehling <felix.kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Rather than open coding it for the queue reset.
Acked-by: Vitaly Prosyak <vitaly.prosyak@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Rather than open coding it for the queue reset.
Acked-by: Vitaly Prosyak <vitaly.prosyak@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Rather than open coding it for the queue reset.
Acked-by: Vitaly Prosyak <vitaly.prosyak@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
It's not supported under SR-IOV at the moment.
Acked-by: Vitaly Prosyak <vitaly.prosyak@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
It's not supported under SR-IOV at the moment.
Acked-by: Vitaly Prosyak <vitaly.prosyak@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
It's not supported under SR-IOV at the moment.
Acked-by: Vitaly Prosyak <vitaly.prosyak@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The reset_queue api could be used from kfd or kgd.
v2: add use_mmio parameter for mes_reset_legacy_queue.
Acked-by: Vitaly Prosyak <vitaly.prosyak@amd.com>
Signed-off-by: Jiadong Zhu <Jiadong.Zhu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Since the MES FW resets kernel compute queue always failed, this
may caused by the KIQ failed to process unmap KCQ. So, before MES
FW work properly that will fallback to driver executes dequeue and
resets SPI directly. Besides, rework the ring reset function and make
the busy ring type reset in each function respectively.
Acked-by: Vitaly Prosyak <vitaly.prosyak@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add ring reset callbacks for gfx and compute.
Acked-by: Vitaly Prosyak <vitaly.prosyak@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
There is a racing condition that cp firmware modifies
MQD in reset sequence after driver updates it for
remapping. We have to wait till CP_HQD_ACTIVE becoming
false then remap the queue.
v2: fix KIQ locking (Alex)
v3: fix KIQ locking harder (Jessie)
Acked-by: Vitaly Prosyak <vitaly.prosyak@amd.com>
Signed-off-by: Jiadong Zhu <Jiadong.Zhu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Kiq command unmap_queues only does the dequeueing action.
We have to map the queue back with clean mqd.
v2: fix up error handling (Alex)
Acked-by: Vitaly Prosyak <vitaly.prosyak@amd.com>
Signed-off-by: Jiadong Zhu <Jiadong.Zhu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
