Russell King says:
====================
net: phylink: simplify SFP PHY attachment
These two patches simplify how we attach SFP PHYs.
The first patch notices that at the two sites where we call
sfp_select_interface(), if that fails, we always print the same error.
Move this into its own function.
The second patch adds an additional level of validation, checking that
the returned interface is one that is supported by the MAC/PCS.
The last patch simplifies how SFP PHYs are attached, reducing the
number of times that we do validation in this path.
====================
Link: https://patch.msgid.link/Zxj8_clRmDA_G7uH@shell.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
There are a few issues with how SFP PHYs are attached:
a) The phylink_sfp_connect_phy() and phylink_sfp_config_phy() code
validates the configuration three times:
1. To discover the support/advertising masks that the PHY/PCS/MAC
can support in order to select an interface.
2. To validate the selected interface.
3. When the PHY is brought up after being attached, another validation
is done.
This is needlessly complex.
b) The configuration is set prior to the PHY being attached, which
means we don't have the PHY available in phylink_major_config()
for phylink_pcs_neg_mode() to make decisions upon.
We have already added an extra step to validate the selected interface,
so we can now move the attachment and bringup of the PHY earlier,
inside phylink_sfp_config_phy(). This results in the validation at
step 2 above becoming entirely unnecessary, so remove that too.
Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Tested-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/E1t3bcb-000c8H-3e@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Validate that the returned interface from sfp_select_interface() is
supportable by the MAC/PCS. If it isn't, print an error and return
the NA interface type. This is a preparatory step to reorganising
how a PHY on a SFP module is handled.
Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Tested-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/E1t3bcV-000c8B-Vz@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Whenever we call sfp_select_interface(), we check the returned value
and print an error. There are two cases where this happens with the
same message. Provide a common function to do this.
Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Tested-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/E1t3bcQ-000c85-S4@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
phylink_parse_fixedlink() wants to preserve the pause, asym_pause and
autoneg bits in pl->supported. Rather than reading the bits into
separate bools, zeroing pl->supported, and then setting them if they
were previously set, use a mask and linkmode_and() to achieve the same
result.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/E1t3Fh5-000aQi-Nk@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Tariq Toukan says:
====================
mlx5e update features on config changes
This small patchset by Dragos adds a call to netdev_update_features()
in configuration changes that could impact the features status.
====================
Link: https://patch.msgid.link/20241024164134.299646-1-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When the ring size changes successfully, trigger
netdev_update_features() to enable features in wanted state if
applicable.
An example of such scenario:
$ ip link set dev eth1 up
$ ethtool --set-ring eth1 rx 8192
$ ip link set dev eth1 mtu 9000
$ ethtool --features eth1 rx-gro-hw on --> fails
$ ethtool --set-ring eth1 rx 1024
With this patch, HW GRO will be turned on automatically because
it is set in the device's wanted_features.
Signed-off-by: Dragos Tatulea <dtatulea@nvidia.com>
Reviewed-by: Gal Pressman <gal@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20241024164134.299646-3-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When the MTU changes successfully, trigger netdev_update_features() to
enable features in wanted state if applicable.
An example of such scenario:
$ ip link set dev eth1 up
$ ethtool --set-ring eth1 rx 8192
$ ip link set dev eth1 mtu 9000
$ ethtool --features eth1 rx-gro-hw on --> fails
$ ip link set dev eth1 mtu 7000
With this patch, HW GRO will be turned on automatically because
it is set in the device's wanted_features.
Signed-off-by: Dragos Tatulea <dtatulea@nvidia.com>
Reviewed-by: Gal Pressman <gal@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20241024164134.299646-2-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Both gcc-14 and clang-18 report that passing a non-string literal as the
format argument of dev_set_name() is potentially insecure.
E.g. clang-18 says:
drivers/net/wwan/wwan_core.c:442:34: warning: format string is not a string literal (potentially insecure) [-Wformat-security]
442 | return dev_set_name(&port->dev, buf);
| ^~~
drivers/net/wwan/wwan_core.c:442:34: note: treat the string as an argument to avoid this
442 | return dev_set_name(&port->dev, buf);
| ^
| "%s",
It is always the case where the contents of mod is safe to pass as the
format argument. That is, in my understanding, it never contains any
format escape sequences.
But, it seems better to be safe than sorry. And, as a bonus, compiler
output becomes less verbose by addressing this issue as suggested by
clang-18.
Compile tested only.
No functional change intended.
Signed-off-by: Simon Horman <horms@kernel.org>
Acked-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>
Link: https://patch.msgid.link/20241023-wwan-fmt-v1-1-521b39968639@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Correct the typo errors in json files
- "diffferent" is corrected to "different".
- "muliple" and "miltiple" is corrected to "multiple".
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Karan Sanghavi <karansanghvi98@gmail.com>
Link: https://patch.msgid.link/20241022-multiple_spell_error-v2-1-7e5036506fe5@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Commit 26eebdc4b0 ("rtnetlink: Return int from rtnl_af_register().")
made rtnl_af_register() return int again, and kdoc needs to be fixed up.
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20241022210320.86111-1-kuniyu@amazon.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Guillaume Nault says:
====================
ipv4: Prepare core ipv4 files to future .flowi4_tos conversion.
Continue preparing users of ->flowi4_tos (struct flowi4) to the future
conversion of this field (from __u8 to dscp_t). The objective is to
have type annotation to properly separate DSCP bits from ECN ones. This
way we'll ensure that ECN doesn't interfere with DSCP and avoid
regressions where it break routing descisions (fib rules in particular).
This series concentrates on some easy IPv4 conversions where
->flowi4_tos is set directly from an IPv4 header, so we can get the
DSCP value using the ip4h_dscp() helper function.
====================
Link: https://patch.msgid.link/cover.1729530028.git.gnault@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Use ip4h_dscp() to get the DSCP from the IPv4 header, then convert the
dscp_t value to __u8 with inet_dscp_to_dsfield().
Then, when we'll convert .flowi4_tos to dscp_t, we'll just have to drop
the inet_dscp_to_dsfield() call.
Signed-off-by: Guillaume Nault <gnault@redhat.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Link: https://patch.msgid.link/0a13a200f31809841975e38633914af1061e0c04.1729530028.git.gnault@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Use ip4h_dscp() to get the DSCP from the IPv4 header, then convert the
dscp_t value to __u8 with inet_dscp_to_dsfield().
Then, when we'll convert .flowi4_tos to dscp_t, we'll just have to drop
the inet_dscp_to_dsfield() call.
Signed-off-by: Guillaume Nault <gnault@redhat.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Link: https://patch.msgid.link/462402a097260357a7aba80228612305f230b6a9.1729530028.git.gnault@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Use ip4h_dscp() to get the DSCP from the IPv4 header, then convert the
dscp_t value to __u8 with inet_dscp_to_dsfield().
Then, when we'll convert .flowi4_tos to dscp_t, we'll just have to drop
the inet_dscp_to_dsfield() call.
Signed-off-by: Guillaume Nault <gnault@redhat.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Link: https://patch.msgid.link/61b7563563f8b0a562b5b62032fe5260034d0aac.1729530028.git.gnault@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Use ip4h_dscp() to get the DSCP from the IPv4 header, then convert the
dscp_t value to __u8 with inet_dscp_to_dsfield().
Then, when we'll convert .flowi4_tos to dscp_t, we'll just have to drop
the inet_dscp_to_dsfield() call.
Signed-off-by: Guillaume Nault <gnault@redhat.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Link: https://patch.msgid.link/a0eba69cce94f747e4c7516184a85ffd0abbe3f0.1729530028.git.gnault@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Rosen Penev says:
====================
ibm: emac: more cleanups
Tested on Cisco MX60W.
v2: fixed build errors. Also added extra commits to clean the driver up
further.
v3: Added tested message. Removed bad alloc_netdev_dummy commit.
v4: removed modules changes from patchset. Added fix for if MAC not
found.
v5: added of_find_matching_node commit.
v6: resend after net-next merge.
v7: removed of_find_matching_node commit. Adjusted mutex_init patch.
v8: removed patch removing custom init/exit. Needs more work.
====================
Link: https://patch.msgid.link/20241022002245.843242-1-rosenp@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
On this Cisco MX60W, u-boot sets the local-mac-address property.
Unfortunately by default, the MAC is wrong and is actually located on a
UBI partition. Which means nvmem needs to be used to grab it.
In the case where that fails, EMAC fails to initialize instead of
generating a random MAC as many other drivers do.
Match behavior with other drivers to have a working ethernet interface.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Reviewed-by: Shannon Nelson <shannon.nelson@amd.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
It seems since inception that mutex_destroy was never called for these
in _remove. Instead of handling this manually, just use devm for
simplicity.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Reviewed-by: Shannon Nelson <shannon.nelson@amd.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
No need for irq_of_parse_and_map since we have platform_device.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Shannon Nelson <shannon.nelson@amd.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
No need to have a struct resource. Gets rid of the TODO.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Shannon Nelson <shannon.nelson@amd.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Kuniyuki Iwashima says:
====================
ipv4: Convert RTM_{NEW,DEL}ADDR and more to per-netns RTNL.
The IPv4 address hash table and GC are already namespacified.
This series converts RTM_NEWADDR/RTM_DELADDR and some more
RTNL users to per-netns RTNL.
Changes:
v2:
* Add patch 1 to address sparse warning for CONFIG_DEBUG_NET_SMALL_RTNL=n
* Add Eric's tags to patch 2-12
v1: https://lore.kernel.org/netdev/20241018012225.90409-1-kuniyu@amazon.com/
====================
Link: https://patch.msgid.link/20241021183239.79741-1-kuniyu@amazon.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
ioctl(SIOCGIFCONF) calls dev_ifconf() that operates on the current netns.
Let's use per-netns RTNL helpers in dev_ifconf() and inet_gifconf().
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Basically, devinet_ioctl() operates on a single netns.
However, ioctl(SIOCSIFFLAGS) will trigger the netdev notifier
that could touch another netdev in different netns.
Let's use per-netns RTNL helper in devinet_ioctl() and place
ASSERT_RTNL() for SIOCSIFFLAGS.
We will remove ASSERT_RTNL() once RTM_SETLINK and RTM_DELLINK
are converted.
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
devinet_sysctl_forward() touches only a single netns.
Let's use rtnl_trylock() and __in_dev_get_rtnl_net().
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
We will need the per-netns version of rtnl_trylock().
rtnl_net_trylock() calls __rtnl_net_lock() only when rtnl_trylock()
successfully holds RTNL.
When RTNL is removed, we will use mutex_trylock() for per-netns RTNL.
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Since commit 1675f38521 ("ipv4: Namespacify IPv4 address GC."),
check_lifetime() works on a per-netns basis.
Let's use rtnl_net_lock() and rtnl_net_dereference().
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Let's push down RTNL into inet_rtm_deladdr() as rtnl_net_lock().
Now, ip_mc_autojoin_config() is always called under per-netns RTNL,
so ASSERT_RTNL() can be replaced with ASSERT_RTNL_NET().
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
inet_rtm_to_ifa() and find_matching_ifa() are called
under rtnl_net_lock().
__in_dev_get_rtnl() and in_dev_for_each_ifa_rtnl() there
can use per-netns RTNL helpers.
Let's define and use __in_dev_get_rtnl_net() and
in_dev_for_each_ifa_rtnl_net().
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The address hash table and GC are already namespacified.
Let's push down RTNL into inet_rtm_newaddr() as rtnl_net_lock().
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
When we pass 0.0.0.0 to __inet_insert_ifa(), it frees ifa and returns 0.
We can do this check much earlier for RTM_NEWADDR even before allocating
struct in_ifaddr.
Let's move the validation to
1. inet_insert_ifa() for ioctl()
2. inet_rtm_newaddr() for RTM_NEWADDR
Now, we can remove the same check in find_matching_ifa().
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
rtm_to_ifaddr() validates some attributes, looks up a netdev,
allocates struct in_ifaddr, and validates IFA_CACHEINFO.
There is no reason to delay IFA_CACHEINFO validation.
We will push RTNL down to inet_rtm_newaddr(), and then we want
to complete rtnetlink validation before rtnl_net_lock().
Let's factorise the validation parts.
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
We will push RTNL down to each doit() as rtnl_net_lock().
We can use RTNL_FLAG_DOIT_UNLOCKED to call doit() without RTNL, but doit()
will still hold RTNL.
Let's define RTNL_FLAG_DOIT_PERNET as an alias of RTNL_FLAG_DOIT_UNLOCKED.
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
When CONFIG_DEBUG_NET_SMALL_RTNL is off, rtnl_net_dereference() is the
static inline wrapper of rtnl_dereference() returning a plain (void *)
pointer to make sure net is always evaluated as requested in [0].
But, it makes sparse complain [1] when the pointer has __rcu annotation:
net/ipv4/devinet.c:674:47: sparse: warning: incorrect type in argument 2 (different address spaces)
net/ipv4/devinet.c:674:47: sparse: expected void *p
net/ipv4/devinet.c:674:47: sparse: got struct in_ifaddr [noderef] __rcu *
Also, if we evaluate net as (void *) in a macro, then the compiler
in turn fails to build due to -Werror=unused-value.
#define rtnl_net_dereference(net, p) \
({ \
(void *)net; \
rtnl_dereference(p); \
})
net/ipv4/devinet.c: In function ‘inet_rtm_deladdr’:
./include/linux/rtnetlink.h:154:17: error: statement with no effect [-Werror=unused-value]
154 | (void *)net; \
net/ipv4/devinet.c:674:21: note: in expansion of macro ‘rtnl_net_dereference’
674 | (ifa = rtnl_net_dereference(net, *ifap)) != NULL;
| ^~~~~~~~~~~~~~~~~~~~
Let's go back to the original simplest macro.
Note that checkpatch complains about this approach, but it's one-shot and
less noisy than the other two.
WARNING: Argument 'net' is not used in function-like macro
#76: FILE: include/linux/rtnetlink.h:142:
+#define rtnl_net_dereference(net, p) \
+ rtnl_dereference(p)
Fixes: 844e5e7e65 ("rtnetlink: Add assertion helpers for per-netns RTNL.")
Link: https://lore.kernel.org/netdev/20241004132145.7fd208e9@kernel.org/ [0]
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202410200325.SaEJmyZS-lkp@intel.com/ [1]
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
mm layer is providing convenient functions, we do not have
to work around old limitations.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Gilad Naaman <gnaaman@drivenets.com>
Reviewed-by: Joe Damato <jdamato@fastly.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://patch.msgid.link/20241022150059.1345406-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
ETHTOOL_MSG_PHY_NTF description is missing in the ethtool netlink spec.
Add it to the spec.
Signed-off-by: Kory Maincent <kory.maincent@bootlin.com>
Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Link: https://patch.msgid.link/20241022151418.875424-1-kory.maincent@bootlin.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add the device name to the per device kmem_cache names to
ensure their uniqueness. This fixes warnings like this:
"kmem_cache of name 'mlx5_fs_fgs' already exists".
Signed-off-by: Sebastian Ott <sebott@redhat.com>
Reviewed-by: Breno Leitao <leitao@debian.org>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/20241023134146.28448-1-sebott@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add document about which modes have native XDP support.
Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org>
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Reviewed-by: Toke Høiland-Jørgensen <toke@redhat.com>
Link: https://patch.msgid.link/20241021031211.814-3-liuhangbin@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Bonding only supports native XDP for specific modes, which can lead to
confusion for users regarding why XDP loads successfully at times and
fails at others. This patch enhances error handling by returning detailed
error messages, providing users with clearer insights into the specific
reasons for the failure when loading native XDP.
Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org>
Reviewed-by: Toke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Link: https://patch.msgid.link/20241021031211.814-2-liuhangbin@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Matthieu Baerts says:
====================
mptcp: various small improvements
The following patches are not related to each other.
- Patch 1: Avoid sending advertisements on stale subflows, reducing
risks on loosing them.
- Patch 2: Annotate data-races around subflow->fully_established, using
READ/WRITE_ONCE().
- Patch 3: A small clean-up on the PM side, avoiding a bit of duplicated
code.
- Patch 4: Use "Middlebox interference" MP_TCPRST code in reaction to a
packet received without MPTCP options in the middle of a connection.
====================
Link: https://patch.msgid.link/20241021-net-next-mptcp-misc-6-13-v1-0-1ef02746504a@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
RFC8684 suggests use of "Middlebox interference (code 0x06)" in case of
fully established subflow that carries data at TCP level with no DSS
sub-option.
This is generally the case when mpext is NULL or mpext->use_map is 0:
use a dedicated value of 'mapping_status' and use it before closing the
socket in subflow_check_data_avail().
Link: https://github.com/multipath-tcp/mptcp_net-next/issues/518
Signed-off-by: Davide Caratti <dcaratti@redhat.com>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20241021-net-next-mptcp-misc-6-13-v1-4-1ef02746504a@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The MPTCP path manager event handler mptcp_pm_connection_closed
interface has been added in the commit 1b1c7a0ef7 ("mptcp: Add path
manager interface") but it was an empty function from then on.
With such name, it sounds good to invoke mptcp_event with the
MPTCP_EVENT_CLOSED event type from it. It also removes a bit of
duplicated code.
Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20241021-net-next-mptcp-misc-6-13-v1-3-1ef02746504a@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
We introduce the same handling for potential data races with the
'fully_established' flag in subflow as previously done for
msk->fully_established.
Additionally, we make a crucial change: convert the subflow's
'fully_established' from 'bit_field' to 'bool' type. This is
necessary because methods for avoiding data races don't work well
with 'bit_field'. Specifically, the 'READ_ONCE' needs to know
the size of the variable being accessed, which is not supported in
'bit_field'. Also, 'test_bit' expect the address of 'bit_field'.
Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/516
Signed-off-by: Gang Yan <yangang@kylinos.cn>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20241021-net-next-mptcp-misc-6-13-v1-2-1ef02746504a@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
If the subflow is considered as "staled", it is better to avoid it to
send an ACK carrying an ADD_ADDR or RM_ADDR. Another subflow, if any,
will then be selected.
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20241021-net-next-mptcp-misc-6-13-v1-1-1ef02746504a@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Move the BCM_SYSPORT_IO_MACRO() definition and its use to bcmsysport.h
where it is more appropriate and where static inline helpers are
acceptable. While at it, make sure that the macro 'offset' argument does
not trigger a checkpatch warning due to possible argument re-use.
Suggested-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20241021174935.57658-3-florian.fainelli@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Vladimir reported the following warning with clang-16 and W=1:
warning: unused function 'txchk_readl' [-Wunused-function]
BCM_SYSPORT_IO_MACRO(txchk, SYS_PORT_TXCHK_OFFSET);
note: expanded from macro 'BCM_SYSPORT_IO_MACRO'
warning: unused function 'txchk_writel' [-Wunused-function]
note: expanded from macro 'BCM_SYSPORT_IO_MACRO'
warning: unused function 'tbuf_readl' [-Wunused-function]
BCM_SYSPORT_IO_MACRO(tbuf, SYS_PORT_TBUF_OFFSET);
note: expanded from macro 'BCM_SYSPORT_IO_MACRO'
warning: unused function 'tbuf_writel' [-Wunused-function]
note: expanded from macro 'BCM_SYSPORT_IO_MACRO'
The TXCHK and RBUF blocks are not being accessed, remove the IO macros
used to access those blocks. No functional impact.
Reported-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20241021174935.57658-2-florian.fainelli@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
