[Why]
Read modify write hazards can occur when using a single shared scratch
register between driver and firmware leading to driver accessing DCN
in IPS2 and a system hang.
[How]
Add infrastructure for using REGION6 as a shared firmware state between
driver and firmware. This region is uncachable.
Replace the existing get/set idle calls with reads/writes to the
(volatile) shared firmware state blocks that a separated by at least
a cache line between firmware and driver.
Remove the workarounds that required rewriting/checking read modify
write hazards.
Reviewed-by: Charlene Liu <charlene.liu@amd.com>
Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]:
issues fixed:
- comparison with wider integer type in loop condition which can cause
infinite loops
- pointer dereference before null check
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Reviewed-by: Josip Pavic <josip.pavic@amd.com>
Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Sohaib Nadeem <sohaib.nadeem@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
There is a potential memory access violation while
iterating through array of dcn35 clks.
[How]
Limit iteration per array size.
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Roman Li <roman.li@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
Need to fix some broken logic and sequencing in initial commit
[HOW]
Fix logic handling override deprogramming when exiting SQ128.
Don't exit early from dp_set_hw_lane_settings for DP2/FIXED_VS case.
Move LTTPR 128b/132b check out of requires_hwss and check during
runtime, as LTTPR caps are not populated on initial call.
Add pending_test_pattern to link state to allow HWSS to set FFE overrides
on retimer TX and/or skip setting APU TX FFE depending on requested pattern.
Use updated clock source for SQ128 override sequence.
Skip HW FFE preset programming when performing test pattern overrides.
Reviewed-by: Wenjing Liu <wenjing.liu@amd.com>
Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Michael Strauss <michael.strauss@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
sw has most of the fgcg enabled which is the same as HW default.
but driver disabled some due to enable flag not initialized.
comparing HW state, we still need to enable dpp and dio.
Reviewed-by: Muhammad Ahmed <ahmed.ahmed@amd.com>
Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Charlene Liu <charlene.liu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
When clip size is changed recout and viewport size would require an
update. When the update is clip size only current driver fails to
program the update into hardware.
[how]
Set a new clip_size_change flag when it is detected and set MED update
type and reprogram scaling params in next program pipe.
Reviewed-by: Aric Cyr <aric.cyr@amd.com>
Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Wenjing Liu <wenjing.liu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This reverts commit f341055b10.
System hang observed, this commit is thought to be the
regression point.
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Reviewed-by: Ovidiu Bunea <ovidiu.bunea@amd.com>
Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Gabe Teeger <gabe.teeger@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
The original picture aspect ratio in mode struct may have chance be
overwritten with wrong aspect ratio data in create_stream_for_sink().
It will create a different VIC output and cause HDMI compliance test
failed.
[How]
Preserve the original picture aspect ratio data during create the
stream.
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Tom Chung <chiahsuan.chung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
As part of a cleanup amdgpu_dm_fini() function, which is typically
called when a device is being shut down or a driver is being unloaded
The below error message suggests that there is a potential null pointer
dereference issue with adev->dm.dc.
In the below, line of code where adev->dm.dc is used without a preceding
null check:
for (i = 0; i < adev->dm.dc->caps.max_links; i++) {
To fix this issue, add a null check for adev->dm.dc before this line.
Reported by smatch:
drivers/gpu/drm/amd/amdgpu/../display/amdgpu_dm/amdgpu_dm.c:1959 amdgpu_dm_fini() error: we previously assumed 'adev->dm.dc' could be null (see line 1943)
Fixes: 006c26a0f1 ("drm/amd/display: Fix crash on device remove/driver unload")
Cc: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Cc: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Roman Li <roman.li@amd.com>
Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]:
This reverts commit 2ff33c759a.
The commit caused corruption when running some applications in fullscreen
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Reviewed-by: Alvin Lee <alvin.lee2@amd.com>
Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Sohaib Nadeem <sohaib.nadeem@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
We Double-check link status if training successful,
but miss the lane align status.
[HOW]
Add the lane align status check
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Reviewed-by: Wenjing Liu <wenjing.liu@amd.com>
Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Zhikai Zhai <zhikai.zhai@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
commit ab4750332d ("drm/amdgpu/sdma5.2: add begin/end_use ring
callbacks") caused GFXOFF control to be used more heavily and the
codepath that was removed from commit 0dee726395 ("drm/amd: flush any
delayed gfxoff on suspend entry") now can be exercised at suspend again.
Users report that by using GNOME to suspend the lockscreen trigger will
cause SDMA traffic and the system can deadlock.
This reverts commit 0dee726395.
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Fixes: ab4750332d ("drm/amdgpu/sdma5.2: add begin/end_use ring callbacks")
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
commit 5095d54181 ("drm/amd: Evict resources during PM ops prepare()
callback") intentionally moved the eviction of resources to earlier in
the suspend process, but this introduced a subtle change that it occurs
before adev->in_s0ix or adev->in_s3 are set. This meant that APUs
actually started to evict resources at suspend time as well.
Explicitly set s0ix or s3 in the prepare() stage, and unset them if the
prepare() stage failed.
v2: squash in warning fix from Stephen Rothwell
Reported-by: Jürg Billeter <j@bitron.ch>
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/3132#note_2271038
Fixes: 5095d54181 ("drm/amd: Evict resources during PM ops prepare() callback")
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
MEM_TRAINING_ENCROACHED_SIZE is for BIST training data. It's
not memory type specific.
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Currently, if the abmlevel module parameter is set, it is possible for
user space to override the ABM level at some point after boot. However,
that is undesirable because it means that we aren't respecting the
user's wishes with regard to the level that they want to use. So,
prevent user space from changing the ABM level if the module parameter
is set to a non-auto value.
Tested-by: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Since 'adev->dm.dc' in amdgpu_dm_fini() might turn out to be NULL
before the call to dc_enable_dmub_notifications(), check
beforehand to ensure there will not be a possible NULL-ptr-deref
there.
Also, since commit 1e88eb1b2c ("drm/amd/display: Drop
CONFIG_DRM_AMD_DC_HDCP") there are two separate checks for NULL in
'adev->dm.dc' before dc_deinit_callbacks() and dc_dmub_srv_destroy().
Clean up by combining them all under one 'if'.
Found by Linux Verification Center (linuxtesting.org) with static
analysis tool SVACE.
Fixes: 81927e2808 ("drm/amd/display: Support for DMUB AUX")
Signed-off-by: Nikita Zhandarovich <n.zhandarovich@fintech.ru>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Clean up a typo in pr_err() erroneously printing NI MC 'rdev->mc_fw->size'
during SMC firmware load. Log 'rdev->smc_fw->size' instead.
Found by Linux Verification Center (linuxtesting.org) with static
analysis tool SVACE.
Fixes: 6596afd48a ("drm/radeon/kms: add dpm support for btc (v3)")
Signed-off-by: Nikita Zhandarovich <n.zhandarovich@fintech.ru>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Enable support for jpeg_v5_0_0 ip block.
Signed-off-by: Sonny Jiang <sonny.jiang@amd.com>
Reviewed-by: Leo Liu <leo.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add doorbell for JPEG5
Signed-off-by: Sonny Jiang <sonny.jiang@amd.com>
Reviewed-by: Leo Liu <leo.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add PG support for JPEG5
Signed-off-by: Sonny Jiang <sonny.jiang@amd.com>
Reviewed-by: Leo Liu <leo.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
when 'find_dcfclk_for_voltage()' function is looping over
VG_NUM_SOC_VOLTAGE_LEVELS (which is 8), but the size of the DcfClocks
array is VG_NUM_DCFCLK_DPM_LEVELS (which is 7).
When the loop variable i reaches 7, the function tries to access
clock_table->DcfClocks[7]. However, since the size of the DcfClocks
array is 7, the valid indices are 0 to 6. Index 7 is beyond the size of
the array, leading to a buffer overflow.
Reported by smatch & thus fixing the below:
drivers/gpu/drm/amd/amdgpu/../display/dc/clk_mgr/dcn301/vg_clk_mgr.c:550 find_dcfclk_for_voltage() error: buffer overflow 'clock_table->DcfClocks' 7 <= 7
Fixes: 3a83e4e64b ("drm/amd/display: Add dcn3.01 support to DC (v2)")
Cc: Roman Li <Roman.Li@amd.com>
Cc: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Cc: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Roman Li <roman.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
'max_chunks_fbc_mode' is only declared and assigned a value under a
specific condition in the following lines:
if (data->fbc_en[i] == 1) {
max_chunks_fbc_mode = 128 - dmif_chunk_buff_margin;
}
If 'data->fbc_en[i]' is not equal to 1 for any i, max_chunks_fbc_mode
will not be initialized if it's used outside of this for loop.
Ensure that 'max_chunks_fbc_mode' is properly initialized before it's
used. Initialize it to a default value right after its declaration to
ensure that it gets a value assigned under all possible control flow
paths.
Thus fixing the below:
drivers/gpu/drm/amd/amdgpu/../display/dc/basics/dce_calcs.c:914 calculate_bandwidth() error: uninitialized symbol 'max_chunks_fbc_mode'.
drivers/gpu/drm/amd/amdgpu/../display/dc/basics/dce_calcs.c:917 calculate_bandwidth() error: uninitialized symbol 'max_chunks_fbc_mode'.
Fixes: 4562236b3b ("drm/amd/dc: Add dc display driver (v2)")
Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Cc: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Roman Li <roman.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
wait_time_microsec = max(wait_time_microsec, (uint32_t)
DPIA_CLK_SYNC_DELAY);
Above line is trying to assign the maximum value between
'wait_time_microsec' and 'DPIA_CLK_SYNC_DELAY' to wait_time_microsec.
However, 'wait_time_microsec' has not been assigned a value before this
line, initialize 'wait_time_microsec' at the point of declaration.
Fixes the below:
drivers/gpu/drm/amd/amdgpu/../display/dc/link/protocols/link_dp_training_dpia.c:697 dpia_training_eq_non_transparent() error: uninitialized symbol 'wait_time_microsec'.
Fixes: 630168a973 ("drm/amd/display: move dp link training logic to link_dp_training")
Cc: Wenjing Liu <wenjing.liu@amd.com>
Cc: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Cc: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Roman Li <roman.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add support for JPEG5
Signed-off-by: Sonny Jiang <sonny.jiang@amd.com>
Reviewed-by: Leo Liu <leo.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Enable support for vcn_v5_0_0_ip_block
Signed-off-by: Sonny Jiang <sonny.jiang@amd.com>
Reviewed-by: Leo Liu <leo.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
These ANDs should be ORs or it will lead to a NULL dereference.
Fixes: fb5a3d0370 ("drm/amd/display: Add NULL test for 'timing generator' in 'dcn21_set_pipe()'")
Fixes: 886571d217 ("drm/amd/display: Fix 'panel_cntl' could be null in 'dcn21_set_backlight_level()'")
Reviewed-by: Anthony Koo <anthony.koo@amd.com>
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
We have observed that there are quite a number of PSR-SU panels on the
market that are unable to keep up with what user space throws at them,
resulting in hangs and random black screens. So, make damage clips
support configurable and disable it by default for PSR-SU displays.
Cc: stable@vger.kernel.org
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add VCN_5_0_0 IP init, ring functions, DPG support.
v2: squash in warning fixes (Alex)
v3: squash in block and ring init, boot, doorbell enablement,
DPG support (Alex)
Signed-off-by: Sonny Jiang <sonny.jiang@amd.com>
Reviewed-by: Leo Liu <leo.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add VCN5_0_0 firmware support
Signed-off-by: Sonny Jiang <sonny.jiang@amd.com>
Reviewed-by: Leo Liu <leo.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Jpeg DPG support for GC IP v11_5_0
Signed-off-by: Saleemkhan Jamadar <saleemkhan.jamadar@amd.com>
Reviewed-by: Leo Liu <leo.liu@amd.com>
Reviewed-by: Veerabadhran Gopalakrishnan <Veerabadhran.Gopalakrishnan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
add ucode id and cmd buffer for jpeg psp sram programming
and Jpeg DPG support.
Signed-off-by: Saleemkhan Jamadar <saleemkhan.jamadar@amd.com>
Reviewed-by: Leo Liu <leo.liu@amd.com>
Reviewed-by: Veerabadhran Gopalakrishnan <Veerabadhran.Gopalakrishnan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
send smu rma reason event to smu in ras eeprom driver.
Signed-off-by: Yang Wang <kevinyang.wang@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
implement smu send rma reason function for smu v13.0.6
Signed-off-by: Yang Wang <kevinyang.wang@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Support to set fw_load_type=3 to use backdoor
rlc autoload.
Signed-off-by: Likun Gao <Likun.Gao@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Only enable VCN/JPEG dpm when VCN/JPEG PG flag was set
when smu set dpm table.
Signed-off-by: Likun Gao <Likun.Gao@amd.com>
Reviewed-by: Kenneth Feng <kenneth.feng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Its currently incorrectly multiplied by number of XCCs in the partition
Fixes: be457b2252 ("drm/amdkfd: Update cache info for GFX 9.4.3")
Signed-off-by: Kent Russell <kent.russell@amd.com>
Reviewed-by: Mukul Joshi <mukul.joshi@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Call the 2nd level trap handler if the cwsr handler is entered with any
one of wave_start, wave_end, or trap_after_inst exceptions.
Signed-off-by: Laurent Morichetti <laurent.morichetti@amd.com>
Tested-by: Lancelot Six <lancelot.six@amd.com>
Reviewed-by: Jay Cornwall <jay.cornwall@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
