From Stephen Warren <swarren@wwwdotorg.org>
This branch contains changes to Tegra board files, and related Kconfig and
Makefile changes. Highlights include:
* Removal of Seaboard/Springbank board files; these boards can now only be
used with device tree.
* Use of small parts of some non-DT board files from the DT board files. This
enables all features that the non-DT board files have, when booting from DT.
This will allow almost complete removal of all non-DT board files in v3.7.
* Other miscellaneous changes.
This branch is based on Tegra's for-3.6/cleanup branch from a previous pull
request.
* 'for-3.6/boards' of git://git.kernel.org/pub/scm/linux/kernel/git/swarren/linux-tegra:
ARM: tegra: use of_default_bus_match_table
ARM: tegra: add device tree AUXDATA for APBDMA
ARM: tegra: paz00: enable WiFi rfkill when booting from device tree
ARM: tegra: harmony: init regulators, PCIe when booting from DT
ARM: tegra: trimslice: enable PCIe when booting from device tree
ARM: tegra: remove Seaboard board files
ARM: tegra: remove CONFIG_MACH_TEGRA_DT
ARM: tegra: make .dts compilation depend on Tegra2 support
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Add the necessary plumbing to make it possible to replace the switch by a
table driven implementation.
The ioctls ops can either be called directly, or by calling a small function
that does some additional work if needed.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
The switch statement that determines how much data should be copied from
userspace is replaced by a table lookup.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
A block of code is moved down in the code to make later changes easier.
Do just the move without other changes to keep the diff readable for the
upcoming patch.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
From Stephen Warren <swarren@wwwdotorg.org>:
This branch contains changes to Tegra SoC-specific code in the
mach-tegra directory; only APBIO/DMA-related patches this time around.
* 'for-3.6/soc' of git://git.kernel.org/pub/scm/linux/kernel/git/swarren/linux-tegra:
ARM: tegra: apbio: use dmaengine based dma driver
ARM: tegra: apbio access using dma for tegra20 only
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Based upon Alan's patch from Coverity scan id 793583, these debug
messages in qlt_async_event() should be starting from byte 0, which is
always the Asynchronous Event Status Code from the parent switch statement.
Also, rename reason_code -> login_code following the language used in
2500 FW spec for Port Database Changed (0x8014) -> Port Database Changed
Event Mailbox Register for mailbox[2].
Signed-off-by: Alan Cox <alan@linux.intel.com>
Cc: Chad Dupuis <chad.dupuis@qlogic.com>
Cc: Giridhar Malavali <giridhar.malavali@qlogic.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
Fix build error in the case of SMP=y but ARCH_SH73A0=n
introduced by:
9601e87 ARM: shmobile: fix smp build
The use of of_machine_is_compatible() will link in the
the SoC-specific symbols:
"sh73a0_get_core_count", "sh73a0_smp_prepare_cpus",
"sh73a0_secondary_init" and "sh73a0_boot_secondary".
This patch adds an ugly #ifdef wrapper as a stop-gap
solution.
Signed-off-by: Magnus Damm <damm@opensource.se>
Tested-by: Tested-by: Simon Horman <horms@verge.net.au>
Acked-by: "Rafael J. Wysocki" <rjw@sisk.pl>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Add ".has_radio = 1" for BTTV_BOARD_MAGICTVIEW061 because there are
some CHP05x/CHP06x boards with a radio tuner.
I still have an analog Askey Magic TView card (CHP051, PCI 144f:3002)
which I use for radio only. This worked fine with kernel 2.6.37
(openSUSE 11.4), but no longer works with kernel 3.1.10 (openSUSE 12.1).
The reason apparently is that ".has_radio = 1" is missing in
bttv-cards.c for BTTV_BOARD_MAGICTVIEW061; when I add this line and
recompile the kernel, radio is working again. The line is still missing
in the latest git tree, for which I have generated the attached patch.
I can't test what will happen for CHP05x/CHP06x devices without radio;
however, it seems that other cards also have the problem that there are
some boards with radio and some without, so I hope that this can be
sorted out.
Signed-off-by: Thomas Betker <thomas.betker@freenet.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Use rcu_dereference_protected to tell rcu that the ft_lport_lock
is held during ft_lport_create. This resolved "suspicious RCU usage"
warnings when debugging options are turned on.
Signed-off-by: Mark Rustad <mark.d.rustad@intel.com>
Tested-by: Ross Brattain <ross.b.brattain@intel.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
From Lee Jones <lee.jones@linaro.org>:
* ux500/fixes-3.5:
ARM: ux500: Over-ride the DT device naming scheme for pinctrl
ARM: ux500: Fix build errors/warnings when MACH_UX500_DT is not set
of: address: Don't fail a lookup just because a node has no reg property
I ended up rebasing Lee's branch on 3.5-rc5 because we have more patches
lined for 3.6 that depend on them, and I want to keep all branches in
arm-soc be based on -rc releases rather than random commits in the
upstream history.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
When pin control mapping tables are written the registered device
name is supplied for use in name-based searches within the pinctrl
driver. In the case of the DB8500 the string "pinctrl-db8500" is
used. However, when we register the driver with Device Tree, its
naming convention uses something that looks more like "pinctrl.2".
To work around the device naming inconsistencies between devices
registered via platform code and the ones registered by Device
Tree, we use AUXDATA to over-ride the Device Tree naming scheme.
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
When MACH_UX500_DT and all related Device Tree configurations are forced
off the warning and error below prevent the kernel from compiling. This
simple patch fixes both issues and allows for full build and boot of
ST-Ericsson's low-cost development board, Snowball.
Warnings fixed:
arch/arm/mach-ux500/board-mop500.c:680:32: warning: ‘snowball_of_platform_devs’ defined but not used
Errors fixed:
arch/arm/mach-ux500/timer.c: In function ‘ux500_timer_init’:
arch/arm/mach-ux500/timer.c:66:3: error: implicit declaration of function ‘of_find_matching_node’
arch/arm/mach-ux500/timer.c:66:6: warning: assignment makes pointer from integer without a cast
Cc: stable@vger.kernel.org
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Sometimes it doesn't make any sense for a node to have an address.
In this case device lookup will always be unsuccessful because we
currently assume every node will have a reg property. This patch
changes the semantics so that the resource address and the lookup
address will only be compared if one exists.
Things like AUXDATA() rely on of_dev_lookup to return the lookup
entry of a particular device in order to do things like apply
platform_data to a device. However, this is currently broken for
nodes which do not have a reg property, meaning that platform_data
can not be passed in those cases.
Acked-by: Rob Herring <rob.herring@calxeda.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Two bug fixes for the previous state of the imx sparse irq changes.
* 'imx/sparse-irq' of git://git.linaro.org/people/shawnguo/linux-2.6:
ARM: imx: select USE_OF
ARM: imx: Fix build error due to missing irqs.h include
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
From Shawn Guo <shawn.guo@linaro.org>:
* 'mxs/defconfig-for-3.6' of git://git.linaro.org/people/shawnguo/linux-2.6:
ARM: mxs: defconfig: Enable CONFIG_COMMON_CLK_DEBUG
ARM: mxs_defconfig: Enable RTC driver
ARM: mxs_defconfig: Let AUART driver be built by default
ARM: mxs: Enable MACH_APX4DEVKIT
ARM: mxs: Let GPMI driver be built by default
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Add generic DT board support for the sh7377 SoC.
SCIF serial ports and timers are kept as regular
platform devices. Other on-chip and on-board devices
should be configured via the device tree.
At this point there is no interrupt controller support
in place but such code will be added over time when
proper IRQ domain support has been added to INTC.
Signed-off-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Add generic DT board support for the r8a7740 SoC.
SCIF serial ports and timers are kept as regular
platform devices. Other on-chip and on-board devices
should be configured via the device tree.
At this point there is no interrupt controller support
in place but such code will be added over time when
proper IRQ domain support has been added to INTC.
Signed-off-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Now, all sh7372 platforms are switched over to use pm-rmobile base PM domain,
and no one is using original sh7372_pm_domain APIs.
We can remove these, switching has been fully completed.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Acked-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
This patch switches ap4evb platform to use pm-rmobile base common API.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Acked-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
This patch switches mackerel platform to use pm-rmobile base common API.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Acked-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
This patch adds pm-rmobile common API base PM domain.
sh7372 CPU/platform will switch to using it from
original implementation
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Acked-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Add ADV7393 I²C-based video encoder driver. This driver has been tested on
custom hardware. It has been tested for composite output. It is derived from the
ADV7343 driver.
Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau@advansee.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Because USB Func is controlled by external IRQ mode,
it is possible to control USB under A3SP domain to reduce power.
This patch enables it.
Armadillo800eva board switchs USB Host/Func by SW1.6,
So, the device to adds into domain is selected on this patch.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Acked-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
It is possible to control LCDC under A4LC domain to reduce power.
This patch enable it.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Acked-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
We can control renesas_usbhs driver as 2 way which are
autonomy mode and external IRQ trigger mode.
Autonomy mode is very easy settings for platform,
but it required USB power domain always ON,
since its connection/disconnection IRQ come from it.
If platform uses external IRQ trigger mode,
USB power domain can be OFF, since its
connection/disconnection IRQ come from external IRQ.
This patch enable external IRQ mode.
Now it is possible to add USB support on A4SP domain.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Acked-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
This patch adds basic A4LC pm domain support.
Now, below devices can be controled by PM
MERAM, LCDC, VOU, ICBS, SDENC-Link
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Acked-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
MSEL1CR 7bit selects IRQ7 source pin which was
VBUS pin or A21/MSIOF0_RSYNC/MSIOF1_TSYNC pin.
But current pfc-r8a7740 MSEL1CR 7bit setting was wrong.
This patch fix it up
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Acked-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
