When converting a filesystem via balance check that metadata mode
is at least as redundant as the data mode. For example give warning
when:
-dconvert=raid1 -mconvert=single
Signed-off-by: Sam Tygier <samtygier@yahoo.co.uk>
[ minor message reformatting ]
Signed-off-by: David Sterba <dsterba@suse.com>
There is one ENOSPC case that's very confusing. There's Available
greater than zero but no file operation succeds (besides removing
files). This happens when the metadata are exhausted and there's no
possibility to allocate another chunk.
In this scenario it's normal that there's still some space in the data
chunk and the calculation in df reflects that in the Avail value.
To at least give some clue about the ENOSPC situation, let statfs report
zero value in Avail, even if there's still data space available.
Current:
/dev/sdb1 4.0G 3.3G 719M 83% /mnt/test
New:
/dev/sdb1 4.0G 3.3G 0 100% /mnt/test
We calculate the remaining metadata space minus global reserve. If this
is (supposedly) smaller than zero, there's no space. But this does not
hold in practice, the exhausted state happens where's still some
positive delta. So we apply some guesswork and compare the delta to a 4M
threshold. (Practically observed delta was 2M.)
We probably cannot calculate the exact threshold value because this
depends on the internal reservations requested by various operations, so
some operations that consume a few metadata will succeed even if the
Avail is zero. But this is better than the other way around.
Signed-off-by: David Sterba <dsterba@suse.com>
We can also preallocate btrfs_path that's used during pending snapshot
creation and avoid another late ENOMEM failure.
Signed-off-by: David Sterba <dsterba@suse.com>
The actual snapshot creation is delayed until transaction commit. If we
cannot get enough memory for the root item there, we have to fail the
whole transaction commit which is bad. So we'll allocate the memory at
the ioctl call and pass it along with the pending_snapshot struct. The
potential ENOMEM will be returned to the caller of snapshot ioctl.
Signed-off-by: David Sterba <dsterba@suse.com>
The values of btrfs_path::locks are 0 to 4, fit into a u8. Let's see:
* overall size of btrfs_path drops down from 136 to 112 (-24 bytes),
* better packing in a slab page +6 objects
* the whole structure now fits to 2 cachelines
* slight decrease in code size:
text data bss dec hex filename
938731 43670 23144 1005545 f57e9 fs/btrfs/btrfs.ko.before
938203 43670 23144 1005017 f55d9 fs/btrfs/btrfs.ko.after
(and the generated assembly does not change much)
The main purpose is to decrease the size of the structure without
affecting performance. The byte access is usually well behaving accross
arches, the locks are not accessed frequently and sometimes just
compared to zero.
Note for further size reduction attempts: the slots could be made u16
but this might generate worse code on some arches (non-byte and non-int
access). Also the range of operations on slots is wider compared to
locks and the potential performance drop should be evaluated first.
Signed-off-by: David Sterba <dsterba@suse.com>
The level is 0..7, we can use smaller type. The size of btrfs_path is now
136 bytes from 144, which is +2 objects that fit into a 4k slab.
Signed-off-by: David Sterba <dsterba@suse.com>
The possible values for reada are all positive and bounded, we can later
save some bytes by storing it in u8.
Signed-off-by: David Sterba <dsterba@suse.com>
Replace the integers by enums for better readability. The value 2 does
not have any meaning since a717531942
"Btrfs: do less aggressive btree readahead" (2009-01-22).
Signed-off-by: David Sterba <dsterba@suse.com>
There are a few statically initialized arrays that can be made const.
The remaining (like file_system_type, sysfs attributes or prop handlers)
do not allow that due to type mismatch when passed to the APIs or
because the structures are modified through other members.
Signed-off-by: David Sterba <dsterba@suse.com>
Preparatory work for making btrfs_free_space_op constant. In
test_steal_space_from_bitmap_to_extent, we substitute use_bitmap with
own version thus preventing constification. We can rework it so we
replace the whole structure with the correct function pointers.
Signed-off-by: David Sterba <dsterba@suse.com>
Use list_for_each_entry*() to simplify the code.
Signed-off-by: Geliang Tang <geliangtang@163.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Use list_for_each_entry_safe() instead of list_for_each_safe() to
simplify the code.
Signed-off-by: Geliang Tang <geliangtang@163.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Use list_for_each_entry*() instead of list_for_each*() to simplify
the code.
Signed-off-by: Geliang Tang <geliangtang@163.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
We use many constants to represent size and offset value. And to make
code readable we use '256 * 1024 * 1024' instead of '268435456' to
represent '256MB'. However we can make far more readable with 'SZ_256MB'
which is defined in the 'linux/sizes.h'.
So this patch replaces 'xxx * 1024 * 1024' kind of expression with
single 'SZ_xxxMB' if 'xxx' is a power of 2 then 'xxx * SZ_1M' if 'xxx' is
not a power of 2. And I haven't touched to '4096' & '8192' because it's
more intuitive than 'SZ_4KB' & 'SZ_8KB'.
Signed-off-by: Byongho Lee <bhlee.kernel@gmail.com>
Signed-off-by: David Sterba <dsterba@suse.com>
It's slightly cleaner to zero-out the delayed node upon allocation
than to do it by hand in btrfs_init_delayed_node() for a few members
Signed-off-by: Alexandru Moise <00moses.alexander00@gmail.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Alexandru Moise <00moses.alexander00@gmail.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Conform to __btrfs_fs_incompat() cast-to-bool (!!) by explicitly
returning boolean not int.
Signed-off-by: Alexandru Moise <00moses.alexander00@gmail.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The inode argument is never used from the beginning, so remove it.
Signed-off-by: Byongho Lee <bhlee.kernel@gmail.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Although we prefer to use separate caches for various structs, it seems
better not to do that for struct btrfs_delalloc_work. Objects of this
type are allocated rarely, when transaction commit calls
btrfs_start_delalloc_roots, requesting delayed iputs.
The objects are temporary (with some IO involved) but still allocated
and freed within __start_delalloc_inodes. Memory allocation failure is
handled.
The slab cache is empty most of the time (observed on several systems),
so if we need to allocate a new slab object, the first one has to
allocate a full page. In a potential case of low memory conditions this
might fail with higher probability compared to using the generic slab
caches.
Signed-off-by: David Sterba <dsterba@suse.com>
We can handle the special case of num_stripes == 0 directly inside
btrfs_read_sys_array. The BUG_ON in btrfs_chunk_item_size is there to
catch other unhandled cases where we fail to validate external data.
A crafted or corrupted image crashes at mount time:
BTRFS: device fsid 9006933e-2a9a-44f0-917f-514252aeec2c devid 1 transid 7 /dev/loop0
BTRFS info (device loop0): disk space caching is enabled
BUG: failure at fs/btrfs/ctree.h:337/btrfs_chunk_item_size()!
Kernel panic - not syncing: BUG!
CPU: 0 PID: 313 Comm: mount Not tainted 4.2.5-00657-ge047887-dirty #25
Stack:
637af890 60062489 602aeb2e 604192ba
60387961 00000011 637af8a0 6038a835
637af9c0 6038776b 634ef32b 00000000
Call Trace:
[<6001c86d>] show_stack+0xfe/0x15b
[<6038a835>] dump_stack+0x2a/0x2c
[<6038776b>] panic+0x13e/0x2b3
[<6020f099>] btrfs_read_sys_array+0x25d/0x2ff
[<601cfbbe>] open_ctree+0x192d/0x27af
[<6019c2c1>] btrfs_mount+0x8f5/0xb9a
[<600bc9a7>] mount_fs+0x11/0xf3
[<600d5167>] vfs_kern_mount+0x75/0x11a
[<6019bcb0>] btrfs_mount+0x2e4/0xb9a
[<600bc9a7>] mount_fs+0x11/0xf3
[<600d5167>] vfs_kern_mount+0x75/0x11a
[<600d710b>] do_mount+0xa35/0xbc9
[<600d7557>] SyS_mount+0x95/0xc8
[<6001e884>] handle_syscall+0x6b/0x8e
Reported-by: Jiri Slaby <jslaby@suse.com>
Reported-by: Vegard Nossum <vegard.nossum@oracle.com>
CC: stable@vger.kernel.org # 3.19+
Signed-off-by: David Sterba <dsterba@suse.com>
btrfs_delayed_extent_op can be packed in a better way, it's 40 bytes now
and has 8 unused bytes. Reducing the level type to u8 makes it possible
to squeeze it to the padding byte after key. The bitfields were switched
to bool as there's space to store the full byte without increasing the
whole structure, besides that the generated assembly is smaller.
struct btrfs_delayed_extent_op {
struct btrfs_disk_key key; /* 0 17 */
u8 level; /* 17 1 */
bool update_key; /* 18 1 */
bool update_flags; /* 19 1 */
bool is_data; /* 20 1 */
/* XXX 3 bytes hole, try to pack */
u64 flags_to_set; /* 24 8 */
/* size: 32, cachelines: 1, members: 6 */
/* sum members: 29, holes: 1, sum holes: 3 */
/* last cacheline: 32 bytes */
};
The final size is 32 bytes which gives +26 object per slab page.
text data bss dec hex filename
938811 43670 23144 1005625 f5839 fs/btrfs/btrfs.ko.before
938747 43670 23144 1005561 f57f9 fs/btrfs/btrfs.ko.after
Signed-off-by: David Sterba <dsterba@suse.com>
Inodes for delayed iput allocate a trivial helper structure, let's place
the list hook directly into the inode and save a kmalloc (killing a
__GFP_NOFAIL as a bonus) at the cost of increasing size of btrfs_inode.
The inode can be put into the delayed_iputs list more than once and we
have to keep the count. This means we can't use the list_splice to
process a bunch of inodes because we'd lost track of the count if the
inode is put into the delayed iputs again while it's processed.
Signed-off-by: David Sterba <dsterba@suse.com>
Since we will add support for -d dup for non-mixed filesystem,
kernel need to support converting to this raid-type.
This patch remove limitation of above case.
Tested by following script:
(combination of dup conversion with fsck):
export TEST_DEV='/dev/vdc'
export TEST_DIR='/var/ltf/tester/mnt'
do_dup_test()
{
local m_from="$1"
local d_from="$2"
local m_to="$3"
local d_to="$4"
echo "Convert from -m $m_from -d $d_from to -m $m_to -d $d_to"
umount "$TEST_DIR" &>/dev/null
./mkfs.btrfs -f -m "$m_from" -d "$d_from" "$TEST_DEV" >/dev/null || return 1
mount "$TEST_DEV" "$TEST_DIR" || return 1
cp -a /sbin/* "$TEST_DIR"
[[ "$m_from" != "$m_to" ]] && {
./btrfs balance start -f -mconvert="$m_to" "$TEST_DIR" || return 1
}
[[ "$d_from" != "$d_to" ]] && {
local opt=()
[[ "$d_to" == single ]] && opt+=("-f")
./btrfs balance start "${opt[@]}" -dconvert="$d_to" "$TEST_DIR" || return 1
}
umount "$TEST_DIR" || return 1
./btrfsck "$TEST_DEV" || return 1
echo
return 0
}
test_all()
{
for m_from in single dup; do
for d_from in single dup; do
for m_to in single dup; do
for d_to in single dup; do
do_dup_test "$m_from" "$d_from" "$m_to" "$d_to" || return 1
done
done
done
done
}
test_all
Signed-off-by: Zhao Lei <zhaolei@cn.fujitsu.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
We hit this panic on a few of our boxes this week where we have an
ordered_extent with an NULL inode. We do an igrab() of the inode in writepages,
but weren't doing it in writepage which can be called directly from the VM on
dirty pages. If the inode has been unlinked then we could have I_FREEING set
which means igrab() would return NULL and we get this panic. Fix this by trying
to igrab in btrfs_writepage, and if it returns NULL then just redirty the page
and return AOP_WRITEPAGE_ACTIVATE; so the VM knows it wasn't successful. Thanks,
Signed-off-by: Josef Bacik <jbacik@fb.com>
Reviewed-by: Liu Bo <bo.li.liu@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Looks like oversight, call brelse() when checksum fails. Further down the
code, in the non error path, we do call brelse() and so we don't see
brelse() in the goto error paths.
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
This is a short term solution to make sure btrfs_run_delayed_refs()
doesn't change the extent tree while we are scanning it to create the
free space tree.
Longer term we need to synchronize scanning the block groups one by one,
similar to what happens during a balance.
Signed-off-by: Chris Mason <clm@fb.com>
We call btrfs_write_dirty_block_groups() in the critical section of a
transaction's commit, when no other tasks can join the transaction and
add more block groups to the transaction's list of dirty block groups,
so we not taking the dirty block groups spinlock when checking for the
list's emptyness, grabbing its first element or deleting elements from
it.
However there's a special and rare case where we can have a concurrent
task adding elements to this list. We trigger writeback for space
caches before at btrfs_start_dirty_block_groups() and in past iterations
of the loop at btrfs_write_dirty_block_groups(), this means that when
the writeback finishes (which happens asynchronously) it creates a
task for the endio free space work queue that executes
btrfs_finish_ordered_io() - this function is able to join the transaction,
through btrfs_join_transaction_nolock(), and update the free space cache's
inode item in the root tree, which can result in COWing nodes of this tree
and therefore allocation of a new block group can happen, which gets added
to the transaction's list of dirty block groups while the transaction
commit task is operating on it concurrently.
So fix this by taking the dirty block groups spinlock before doing
operations on the dirty block groups list at
btrfs_write_dirty_block_groups().
Signed-off-by: Filipe Manana <fdmanana@suse.com>
A fix for a nasty hardware bug in rk808 and a initialization reordering in
da9063 to fix a possible crash.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=xXh7
-----END PGP SIGNATURE-----
Merge tag 'rtc-4.4-3' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux
Pull RTC fixes from Alexandre Belloni:
"Late fixes for the RTC subsystem for 4.4:
A fix for a nasty hardware bug in rk808 and an initialization
reordering in da9063 to fix a possible crash"
* tag 'rtc-4.4-3' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux:
rtc: da9063: fix access ordering error during RTC interrupt at system power on
rtc: rk808: Compensate for Rockchip calendar deviation on November 31st
This fix alters the ordering of the IRQ and device registrations in the RTC
driver probe function. This change will apply to the RTC driver that supports
both DA9063 and DA9062 PMICs.
A problem could occur with the existing RTC driver if:
A system is started from a cold boot using the PMIC RTC IRQ to initiate a
power on operation. For instance, if an RTC alarm is used to start a
platform from power off.
The existing driver IRQ is requested before the device has been properly
registered.
i.e.
ret = devm_request_threaded_irq()
comes before
rtc->rtc_dev = devm_rtc_device_register();
In this case, the interrupt can be called before the device has been
registered and the handler can be called immediately. The IRQ handler
da9063_alarm_event() contains the function call
rtc_update_irq(rtc->rtc_dev, 1, RTC_IRQF | RTC_AF);
which in turn tries to access the unavailable rtc->rtc_dev.
The fix is to reorder the functions inside the RTC probe. The IRQ is
requested after the RTC device resource has been registered so that
get_irq_byname is the last thing to happen.
Signed-off-by: Steve Twiss <stwiss.opensource@diasemi.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
In A.D. 1582 Pope Gregory XIII found that the existing Julian calendar
insufficiently represented reality, and changed the rules about
calculating leap years to account for this. Similarly, in A.D. 2013
Rockchip hardware engineers found that the new Gregorian calendar still
contained flaws, and that the month of November should be counted up to
31 days instead. Unfortunately it takes a long time for calendar changes
to gain widespread adoption, and just like more than 300 years went by
before the last Protestant nation implemented Greg's proposal, we will
have to wait a while until all religions and operating system kernels
acknowledge the inherent advantages of the Rockchip system. Until then
we need to translate dates read from (and written to) Rockchip hardware
back to the Gregorian format.
This patch works by defining Jan 1st, 2016 as the arbitrary anchor date
on which Rockchip and Gregorian calendars are in sync. From that we can
translate arbitrary later dates back and forth by counting the number
of November/December transitons since the anchor date to determine the
offset between the calendars. We choose this method (rather than trying
to regularly "correct" the date stored in hardware) since it's the only
way to ensure perfect time-keeping even if the system may be shut down
for an unknown number of years. The drawback is that other software
reading the same hardware (e.g. mainboard firmware) must use the same
translation convention (including the same anchor date) to be able to
read and write correct timestamps from/to the RTC.
Signed-off-by: Julius Werner <jwerner@chromium.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Here are some tty/serial driver fixes for 4.4-rc6 that resolve some
reported problems. All of these have been in linux-next. The details
are in the shortlog.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2
iEYEABECAAYFAlZ19rAACgkQMUfUDdst+ykBQQCeKSU7YZFKPTEFbGKS2UfFgMJd
EokAoIJp4lXqhLHKtI7TNwVFlMQAaDYj
=2I3R
-----END PGP SIGNATURE-----
Merge tag 'tty-4.4-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Pull tty/serial fixes from Greg KH:
"Here are some tty/serial driver fixes for 4.4-rc6 that resolve some
reported problems. All of these have been in linux-next. The details
are in the shortlog"
* tag 'tty-4.4-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
tty: Fix GPF in flush_to_ldisc()
serial: earlycon: Add missing spinlock initialization
serial: sh-sci: Fix length of scatterlist
n_tty: Fix poll() after buffer-limited eof push read
serial: 8250_uniphier: fix dl_read and dl_write functions
Here are some USB and PHY fixes for 4.4-rc6. All of them resolve some
reported problems. Full details in the shortlog.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2
iEYEABECAAYFAlZ1+CoACgkQMUfUDdst+yksSQCg1MuW8nVyz7eUHcZnd/r4dSPa
fy8An0J0aKi8IhUMSIAIFcoM4/40ulCE
=ycut
-----END PGP SIGNATURE-----
Merge tag 'usb-4.4-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB fixes from Greg KH:
"Here are some USB and PHY fixes for 4.4-rc6. All of them resolve some
reported problems. Full details in the shortlog"
* tag 'usb-4.4-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
USB: fix invalid memory access in hub_activate()
USB: ipaq.c: fix a timeout loop
phy: core: Get a refcount to phy in devm_of_phy_get_by_index()
phy: cygnus: pcie: add missing of_node_put
phy: miphy365x: add missing of_node_put
phy: miphy28lp: add missing of_node_put
phy: rockchip-usb: add missing of_node_put
phy: berlin-sata: add missing of_node_put
phy: mt65xx-usb3: add missing of_node_put
phy: brcmstb-sata: add missing of_node_put
phy: sun9i-usb: add USB dependency
- 2 recently introduced regressions fixed.
- one older bug in RAID10 - tagged for -stable since 4.2
- one minor sysfs api improvement.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2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=nHNn
-----END PGP SIGNATURE-----
Merge tag 'md/4.4-rc5-fixes' of git://neil.brown.name/md
Pull md fixes from Neil Brown:
"Four fixes for md:
- two recently introduced regressions fixed.
- one older bug in RAID10 - tagged for -stable since 4.2
- one minor sysfs api improvement"
* tag 'md/4.4-rc5-fixes' of git://neil.brown.name/md:
Fix remove_and_add_spares removes drive added as spare in slot_store
md: fix bug due to nested suspend
MD: change journal disk role to disk 0
md/raid10: fix data corruption and crash during resync
- Partial revert of "powerpc: Individual System V IPC system calls"
- pr_warn_once on unsupported OPAL_MSG type from Stewart
- Fix deadlock in opal-irqchip introduced by "Fix double endian conversion" from Alistair
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQIcBAABAgAGBQJWdTe9AAoJEFHr6jzI4aWANO4QAJwqS2Zhga0v/JSqMUpKgrlM
aFMLp6nM25wHkFmRBbIgJbkQAqG+2Sl43OARuJ4y4b3J9fqjKBXxzymgPQ+Y1OlR
xd+psLmfRf5r/cge45UgILhxE5LFckVIVg/uYkeI5zfRq9TqYes1Ys+7nGpV7IdB
zWXseulscE/KcEbDHlBexN9/FujONZk6DU6m17TzJbkiptn+7CA0AahbWsK9t05g
jXCppDPvGYvYGYQ4Y0G8Qnp3jELDlmPhwYWGLw7gruGTHSfbMQxhFokembk/HDcx
tSetmTBzGt384h7dVJD6HF89VuwgqECBIL8hl0cajFkjkzgdIieDuEGWM1yov4+R
7Tv05aO/5xYUy5vTk5qkMfywH+TQOwVjr3p3KZgGdj8ddYu7Sk4rRwKK/4cN1M7W
/RrRzeSOJ2RkTedzu1/sd0h49r2o7tUtgC0rKosDBkibCk135yNa3pe7FKHyR8NW
a/B57u6+wFvf374TUVMavcSeRvIa4cQ3YuMPcM8ykrEUJWB+QVEXPNiTNG5rux4Z
4+VX9n0/LhsEu+dGMrdWkpEUSCXi4p6AQHKpTDocWSfEiGNU77b1vF7va06T34fN
nbp6O0dXFnTgX6IJ8jEQzc8bELElFNw0gfgH6vHpgh6dkFEyL/ew0mJqQJ17bJLF
HUxdt4/OgNVj5htfeKDI
=58wA
-----END PGP SIGNATURE-----
Merge tag 'powerpc-4.4-5' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc fixes from Michael Ellerman:
- Partial revert of "powerpc: Individual System V IPC system calls"
- pr_warn_once on unsupported OPAL_MSG type from Stewart
- Fix deadlock in opal-irqchip introduced by "Fix double endian
conversion" from Alistair
* tag 'powerpc-4.4-5' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc/opal-irqchip: Fix deadlock introduced by "Fix double endian conversion"
powerpc/powernv: pr_warn_once on unsupported OPAL_MSG type
Partial revert of "powerpc: Individual System V IPC system calls"
A couple of reference counting bugs here, one in spidev and one with
holding an extra reference in the core that we never freed if we removed
a device, plus a driver specific fix. Both of the refcounting bugs are
very old but they've only been found by observation so hopefully their
impact has been low.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJWdUKcAAoJECTWi3JdVIfQO1EH/3aQKNFu1Z5cEaKiBtQ0aZZD
1E/w+OPqmKdaFDlXvwXO+W4UY5m0w0Kg5FPg4wMgpjDJQTiELtLJ3c4BiKp1Du8p
8RHnpqrYtggCZOK2r6iJNonIdIDDIDZMxxu1KHaKl+Wsqh9/1xUsQg7X9xi5Iaiv
fVd+QlhmCfC42lU92urBboPmON31XxaITTM8qNhGvQO77L4FdZHiVMP/bmyephV7
Mr4G7MFZHDZljGqEUhAlamhEiBxmCtQAm0eDhWmbYwN6S3U8L5VSqrkBDbNR08C+
4qnek2PS2/HlkQwMTpgGZpLrLyk04oWgsFMVZQ2275vR9qZlQTgnlEu50roBBD0=
=DMO9
-----END PGP SIGNATURE-----
Merge tag 'spi-fix-v4.4-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi
Pull spi fixes from Mark Brown:
"A couple of reference counting bugs here, one in spidev and one with
holding an extra reference in the core that we never freed if we
removed a device, plus a driver specific fix. Both of the refcounting
bugs are very old but they've only been found by observation so
hopefully their impact has been low"
* tag 'spi-fix-v4.4-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
spi: fix parent-device reference leak
spi: spidev: Hold spi_lock over all defererences of spi in release()
spi-fsl-dspi: Fix CTAR Register access
