mirror of
https://github.com/torvalds/linux.git
synced 2026-07-31 19:47:08 +02:00
b09757104e
852735 Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
|
|
b09757104e |
lib/string.c: allow searching for NUL with strnchr
Patch series "lib/string: search for NUL with strchr/strnchr". I noticed an inconsistency where strchr and strnchr do not behave the same with respect to the trailing NUL. strchr is standardised and the kernel function conforms, and the kernel relies on the behavior. So, naturally strchr stays as-is and strnchr is what I change. While writing a few tests to verify that my new strnchr loop was sane, I noticed that the tests for memset16/32/64 had a problem. Since it's all about the lib/string.c file I made a short series of it all... This patch (of 3): strchr considers the terminating NUL to be part of the string, and NUL can thus be searched for with that function. For consistency, do the same with strnchr. Link: http://lkml.kernel.org/r/20190506124634.6807-2-peda@axentia.se Signed-off-by: Peter Rosin <peda@axentia.se> Cc: Matthew Wilcox <willy@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
|
4c6080cd6f |
lib/list: tweak LIST_POISON2 for better code generation on x86_64
list_del() poisoning can generate 2 64-bit immediate loads but it also can generate one 64-bit immediate load and an addition: 48 b8 00 01 00 00 00 00 ad de movabs rax,0xdead000000000100 48 89 47 58 mov QWORD PTR [rdi+0x58],rax 48 05 00 01 00 00 <=====> add rax,0x100 48 89 47 60 mov QWORD PTR [rdi+0x60],rax However on x86_64 not all constants are equal: those within [-128, 127] range can be added with shorter "add r64, imm32" instruction: 48 b8 00 01 00 00 00 00 ad de movabs rax,0xdead000000000100 48 89 47 58 mov QWORD PTR [rdi+0x58],rax 48 83 c0 22 <======> add rax,0x22 48 89 47 60 mov QWORD PTR [rdi+0x60],rax Patch saves 2 bytes per some LIST_POISON2 usage. (Slightly disappointing) space savings on F29 x86_64 config: add/remove: 0/0 grow/shrink: 0/2164 up/down: 0/-5184 (-5184) Function old new delta zstd_get_workspace 548 546 -2 ... mlx4_delete_all_resources_for_slave 4826 4804 -22 Total: Before=83304131, After=83298947, chg -0.01% New constants are: 0xdead000000000100 0xdead000000000122 Note: LIST_POISON1 can't be changed to ...11 because something in page allocator requires low bit unset. Link: http://lkml.kernel.org/r/20190513191502.GA8492@avx2 Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Cc: Vasiliy Kulikov <segoon@openwall.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
|
49662503e8 |
get_maintainer: add ability to skip moderated mailing lists
Add a command line switch --no-moderated to skip L: mailing lists marked with 'moderated'. Some people prefer not emailing moderated mailing lists as the moderation time can be indeterminate and some emails can be intentionally dropped by a moderator. This can cause fragmentation of email threads when some are subscribed to a moderated list but others are not and emails are dropped. Link: http://lkml.kernel.org/r/6f23c2918ad9fc744269feb8f909bdfb105c5afc.camel@perches.com Signed-off-by: Joe Perches <joe@perches.com> Tested-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
|
c296d4dc13 |
asm-generic: fix a compilation warning
Fix this compilation warning on x86 by making flush_cache_vmap() inline.
lib/ioremap.c: In function 'ioremap_page_range':
lib/ioremap.c:214:16: warning: variable 'start' set but not used [-Wunused-but-set-variable]
unsigned long start;
^~~~~
While at it, convert all other similar functions to inline for
consistency.
Link: http://lkml.kernel.org/r/1562594592-15228-1-git-send-email-cai@lca.pw
Signed-off-by: Qian Cai <cai@lca.pw>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
||
|
|
3a7f0adfe7 |
arch/*: remove unused isa_page_to_bus()
isa_page_to_bus() is deprecated and is no longer used anywhere. Remove it entirely. Link: http://lkml.kernel.org/r/20190613161155.16946-1-steve@sk2.org Signed-off-by: Stephen Kitt <steve@sk2.org> Acked-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
|
fe6ba88b25 |
arch: replace _BITUL() in kernel-space headers with BIT()
Now that BIT() can be used from assembly code, we can safely replace _BITUL() with equivalent BIT(). UAPI headers are still required to use _BITUL(), but there is no more reason to use it in kernel headers. BIT() is shorter. Link: http://lkml.kernel.org/r/20190609153941.17249-2-yamada.masahiro@socionext.com Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: Christian Borntraeger <borntraeger@de.ibm.com> Cc: Vineet Gupta <vgupta@synopsys.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Will Deacon <will.deacon@arm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
|
95b980d62d |
linux/bits.h: make BIT(), GENMASK(), and friends available in assembly
BIT(), GENMASK(), etc. are useful to define register bits of hardware. However, low-level code is often written in assembly, where they are not available due to the hard-coded 1UL, 0UL. In fact, in-kernel headers such as arch/arm64/include/asm/sysreg.h use _BITUL() instead of BIT() so that the register bit macros are available in assembly. Using macros in include/uapi/linux/const.h have two reasons: [1] For use in uapi headers We should use underscore-prefixed variants for user-space. [2] For use in assembly code Since _BITUL() uses UL(1) instead of 1UL, it can be used as an alternative of BIT(). For [2], it is pretty easy to change BIT() etc. for use in assembly. This allows to replace _BUTUL() in kernel-space headers with BIT(). Link: http://lkml.kernel.org/r/20190609153941.17249-1-yamada.masahiro@socionext.com Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Christian Borntraeger <borntraeger@de.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: Vineet Gupta <vgupta@synopsys.com> Cc: Will Deacon <will.deacon@arm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
|
65f50f2553 |
kernel: fix typos and some coding style in comments
fix lenght to length Link: http://lkml.kernel.org/r/20190521050937.4370-1-houweitaoo@gmail.com Signed-off-by: Weitao Hou <houweitaoo@gmail.com> Acked-by: Kees Cook <keescook@chromium.org> Cc: Colin Ian King <colin.king@canonical.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
|
5ec27ec735 |
fs/proc/proc_sysctl.c: fix the default values of i_uid/i_gid on /proc/sys inodes.
Normally, the inode's i_uid/i_gid are translated relative to s_user_ns, but this is not a correct behavior for proc. Since sysctl permission check in test_perm is done against GLOBAL_ROOT_[UG]ID, it makes more sense to use these values in u_[ug]id of proc inodes. In other words: although uid/gid in the inode is not read during test_perm, the inode logically belongs to the root of the namespace. I have confirmed this with Eric Biederman at LPC and in this thread: https://lore.kernel.org/lkml/87k1kzjdff.fsf@xmission.com Consequences ============ Since the i_[ug]id values of proc nodes are not used for permissions checks, this change usually makes no functional difference. However, it causes an issue in a setup where: * a namespace container is created without root user in container - hence the i_[ug]id of proc nodes are set to INVALID_[UG]ID * container creator tries to configure it by writing /proc/sys files, e.g. writing /proc/sys/kernel/shmmax to configure shared memory limit Kernel does not allow to open an inode for writing if its i_[ug]id are invalid, making it impossible to write shmmax and thus - configure the container. Using a container with no root mapping is apparently rare, but we do use this configuration at Google. Also, we use a generic tool to configure the container limits, and the inability to write any of them causes a failure. History ======= The invalid uids/gids in inodes first appeared due to |
||
|
|
7dbbade1f2 |
proc: test /proc/sysvipc vs setns(CLONE_NEWIPC)
I thought that /proc/sysvipc has the same bug as /proc/net
commit
|
||
|
|
9af27b28b1 |
fs/proc/inode.c: use typeof_member() macro
Don't repeat function signatures twice. This is a kind-of-precursor for "struct proc_ops". Note: typeof(pde->proc_fops->...) ...; can't be used because ->proc_fops is "const struct file_operations *". "const" prevents assignment down the code and it can't be deleted in the type system. Link: http://lkml.kernel.org/r/20190529191110.GB5703@avx2 Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
|
ce251e0e3c |
include/linux/kernel.h: add typeof_member() macro
Add typeof_member() macro so that types can be extracted without introducing dummy variables. Link: http://lkml.kernel.org/r/20190529190720.GA5703@avx2 Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
|
c6c405336b |
vmcore: add a kernel parameter novmcoredd
Since commit
|
||
|
|
bca1eac55a |
tools/testing/selftests/proc/proc-pid-vm.c: hide "segfault at ffffffffff600000" dmesg spam
Test tries to access vsyscall page and if it doesn't exist gets SIGSEGV which can spam into dmesg. However the segfault happens by design. Handle it and carry information via exit code to parent. Link: http://lkml.kernel.org/r/20190524181256.GA2260@avx2 Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
|
9b98fa2294 |
mm: stub out all of swapops.h for !CONFIG_MMU
The whole header file deals with swap entries and PTEs, none of which can exist for nommu builds. The current nommu ports have lots of stubs to allow the inline functions in swapops.h to compile, but as none of this functionality is actually used there is no point in even providing it. This way we don't have to provide the stubs for the upcoming RISC-V nommu port, and can eventually remove it from the existing ports. Link: http://lkml.kernel.org/r/20190703122359.18200-4-hch@lst.de Signed-off-by: Christoph Hellwig <hch@lst.de> Cc: Vladimir Murzin <vladimir.murzin@arm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
|
89165b8b0e |
mm: provide a print_vma_addr stub for !CONFIG_MMU
Link: http://lkml.kernel.org/r/20190703122359.18200-3-hch@lst.de Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Vladimir Murzin <vladimir.murzin@arm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
|
0bf5f94923 |
mm: fix the MAP_UNINITIALIZED flag
We can't expose UAPI symbols differently based on CONFIG_ symbols, as userspace won't have them available. Instead always define the flag, but only respect it based on the config option. Link: http://lkml.kernel.org/r/20190703122359.18200-2-hch@lst.de Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Vladimir Murzin <vladimir.murzin@arm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
|
c633324e31 |
mm/cma.c: fail if fixed declaration can't be honored
The description of cma_declare_contiguous() indicates that if the
'fixed' argument is true the reserved contiguous area must be exactly at
the address of the 'base' argument.
However, the function currently allows the 'base', 'size', and 'limit'
arguments to be silently adjusted to meet alignment constraints. This
commit enforces the documented behavior through explicit checks that
return an error if the region does not fit within a specified region.
Link: http://lkml.kernel.org/r/1561422051-16142-1-git-send-email-opendmb@gmail.com
Fixes:
|
||
|
|
c92d2f3856 |
mm/z3fold.c: reinitialize zhdr structs after migration
z3fold_page_migration() calls memcpy(new_zhdr, zhdr, PAGE_SIZE).
However, zhdr contains fields that can't be directly coppied over (ex:
list_head, a circular linked list). We only need to initialize the
linked lists in new_zhdr, as z3fold_isolate_page() already ensures that
these lists are empty
Additionally it is possible that zhdr->work has been placed in a
workqueue. In this case we shouldn't migrate the page, as zhdr->work
references zhdr as opposed to new_zhdr.
Link: http://lkml.kernel.org/r/20190716000520.230595-1-henryburns@google.com
Fixes:
|
||
|
|
be03074c9a |
mm/z3fold.c: remove z3fold_migration trylock
z3fold_page_migrate() will never succeed because it attempts to acquire
a lock that has already been taken by migrate.c in __unmap_and_move().
__unmap_and_move() migrate.c
trylock_page(oldpage)
move_to_new_page(oldpage_newpage)
a_ops->migrate_page(oldpage, newpage)
z3fold_page_migrate(oldpage, newpage)
trylock_page(oldpage)
Link: http://lkml.kernel.org/r/20190710213238.91835-1-henryburns@google.com
Fixes:
|
||
|
|
1732d2b011 |
mm/vmscan.c: add checks for incorrect handling of current->reclaim_state
Six sites are presently altering current->reclaim_state. There is a risk that one function stomps on a caller's value. Use a helper function to catch such errors. Cc: Yafang Shao <laoar.shao@gmail.com> Cc: Kirill Tkhai <ktkhai@virtuozzo.com> Cc: Michal Hocko <mhocko@suse.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Vladimir Davydov <vdavydov.dev@gmail.com> Cc: Mel Gorman <mgorman@techsingularity.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
|
0308f7cf19 |
mm/vmscan.c: calculate reclaimed slab caches in all reclaim paths
There are six different reclaim paths by now: - kswapd reclaim path - node reclaim path - hibernate preallocate memory reclaim path - direct reclaim path - memcg reclaim path - memcg softlimit reclaim path The slab caches reclaimed in these paths are only calculated in the above three paths. There're some drawbacks if we don't calculate the reclaimed slab caches. - The sc->nr_reclaimed isn't correct if there're some slab caches relcaimed in this path. - The slab caches may be reclaimed thoroughly if there're lots of reclaimable slab caches and few page caches. Let's take an easy example for this case. If one memcg is full of slab caches and the limit of it is 512M, in other words there're approximately 512M slab caches in this memcg. Then the limit of the memcg is reached and the memcg reclaim begins, and then in this memcg reclaim path it will continuesly reclaim the slab caches until the sc->priority drops to 0. After this reclaim stops, you will find there're few slab caches left, which is less than 20M in my test case. While after this patch applied the number is greater than 300M and the sc->priority only drops to 3. Link: http://lkml.kernel.org/r/1561112086-6169-3-git-send-email-laoar.shao@gmail.com Signed-off-by: Yafang Shao <laoar.shao@gmail.com> Reviewed-by: Kirill Tkhai <ktkhai@virtuozzo.com> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Cc: Kirill Tkhai <ktkhai@virtuozzo.com> Cc: Michal Hocko <mhocko@suse.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Vladimir Davydov <vdavydov.dev@gmail.com> Cc: Mel Gorman <mgorman@techsingularity.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
|
e5ca8071fe |
mm/vmscan.c: add a new member reclaim_state in struct shrink_control
Patch series "mm/vmscan: calculate reclaimed slab in all reclaim paths". This patchset is to fix the issues in doing shrink slab. There're six different reclaim paths by now, - kswapd reclaim path - node reclaim path - hibernate preallocate memory reclaim path - direct reclaim path - memcg reclaim path - memcg softlimit reclaim path The slab caches reclaimed in these paths are only calculated in the above three paths. The issues are detailed explained in patch #2. We should calculate the reclaimed slab caches in every reclaim path. In order to do it, the struct reclaim_state is placed into the struct shrink_control. In node reclaim path, there'is another issue about shrinking slab, which is adressed in "mm/vmscan: shrink slab in node reclaim" (https://lore.kernel.org/linux-mm/1559874946-22960-1-git-send-email-laoar.shao@gmail.com/). This patch (of 2): The struct reclaim_state is used to record how many slab caches are reclaimed in one reclaim path. The struct shrink_control is used to control one reclaim path. So we'd better put reclaim_state into shrink_control. [laoar.shao@gmail.com: remove reclaim_state assignment from __perform_reclaim()] Link: http://lkml.kernel.org/r/1561381582-13697-1-git-send-email-laoar.shao@gmail.com Link: http://lkml.kernel.org/r/1561112086-6169-2-git-send-email-laoar.shao@gmail.com Signed-off-by: Yafang Shao <laoar.shao@gmail.com> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: Kirill Tkhai <ktkhai@virtuozzo.com> Cc: Michal Hocko <mhocko@suse.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Vladimir Davydov <vdavydov.dev@gmail.com> Cc: Mel Gorman <mgorman@techsingularity.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
|
766a4c19d8 |
mm/memcontrol.c: keep local VM counters in sync with the hierarchical ones
After commit
|
||
|
|
f1549cb5ab |
mm/z3fold.c: allow __GFP_HIGHMEM in z3fold_alloc
One of the gfp flags used to show that a page is movable is __GFP_HIGHMEM. Currently z3fold_alloc() fails when __GFP_HIGHMEM is passed. Now that z3fold pages are movable, we allow __GFP_HIGHMEM. We strip the movability related flags from the call to kmem_cache_alloc() for our slots since it is a kernel allocation. [akpm@linux-foundation.org: coding-style fixes] Link: http://lkml.kernel.org/r/20190712222118.108192-1-henryburns@google.com Signed-off-by: Henry Burns <henryburns@google.com> Acked-by: Vitaly Wool <vitalywool@gmail.com> Reviewed-by: Shakeel Butt <shakeelb@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
|
929f92f780 |
mm/cma.c: fix a typo ("alloc_cma" -> "cma_alloc") in cma_release() comments
A comment referred to a non-existent function alloc_cma(), which should have been cma_alloc(). Link: http://lkml.kernel.org/r/20190712085549.5920-1-ryh.szk.cmnty@gmail.com Signed-off-by: Ryohei Suzuki <ryh.szk.cmnty@gmail.com> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
|
a07057dce2 |
mm/slab_common.c: work around clang bug #42570
Clang gets rather confused about two variables in the same special section when one of them is not initialized, leading to an assembler warning later: /tmp/slab_common-18f869.s: Assembler messages: /tmp/slab_common-18f869.s:7526: Warning: ignoring changed section attributes for .data..ro_after_init Adding an initialization to kmalloc_caches is rather silly here but does avoid the issue. Link: https://bugs.llvm.org/show_bug.cgi?id=42570 Link: http://lkml.kernel.org/r/20190712090455.266021-1-arnd@arndb.de Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: David Rientjes <rientjes@google.com> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Cc: Christoph Lameter <cl@linux.com> Cc: Pekka Enberg <penberg@kernel.org> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Roman Gushchin <guro@fb.com> Cc: Shakeel Butt <shakeelb@google.com> Cc: Vladimir Davydov <vdavydov.dev@gmail.com> Cc: Andrey Konovalov <andreyknvl@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
|
7b7c1df288 |
lib/mpi/longlong.h: fix building with 32-bit x86
The mpi library contains some rather old inline assembly statements that
produce a lot of warnings for 32-bit x86, such as:
lib/mpi/mpih-div.c:76:16: error: invalid use of a cast in a inline asm context requiring an l-value: remove the cast or build with -fheinous-gnu-extensions
udiv_qrnnd(qp[i], n1, n1, np[i], d);
~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~
lib/mpi/longlong.h:423:20: note: expanded from macro 'udiv_qrnnd'
: "=a" ((USItype)(q)), \
~~~~~~~~~~^~
There is no point in doing a type cast for the output of an inline
assembler statement, so just remove the cast here, as we have done for
other architectures in the past.
See also
|
||
|
|
e5f2249ab8 |
mm/shmem.c: fix unused shmem_parse_huge() function warning
When CONFIG_SYSFS is disabled but CONFIG_TMPFS is enabled, we get a warning about shmem_parse_huge() never being called: mm/shmem.c:417:12: error: unused function 'shmem_parse_huge' [-Werror,-Wunused-function] static int shmem_parse_huge(const char *str) Change the #ifdef so we no longer build this function in that configuration. Link: http://lkml.kernel.org/r/20190712091141.673355-1-arnd@arndb.de Fixes: 144df3b288c4 ("vfs: Convert ramfs, shmem, tmpfs, devtmpfs, rootfs to use the new mount API") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Cc: Hugh Dickins <hughd@google.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: David Howells <dhowells@redhat.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Matthew Wilcox <willy@infradead.org> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Vineeth Remanan Pillai <vpillai@digitalocean.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
|
bb9a374dfa |
mm/z3fold: don't try to use buddy slots after free
As reported by Henry Burns:
Running z3fold stress testing with address sanitization showed zhdr->slots
was being used after it was freed.
z3fold_free(z3fold_pool, handle)
free_handle(handle)
kmem_cache_free(pool->c_handle, zhdr->slots)
release_z3fold_page_locked_list(kref)
__release_z3fold_page(zhdr, true)
zhdr_to_pool(zhdr)
slots_to_pool(zhdr->slots) *BOOM*
To fix this, add pointer to the pool back to z3fold_header and modify
zhdr_to_pool to return zhdr->pool.
Link: http://lkml.kernel.org/r/20190708134808.e89f3bfadd9f6ffd7eff9ba9@gmail.com
Fixes:
|
||
|
|
5095062641 |
- New Functionality
- Provide support for ACPI enumeration; gpio_backlight
- Fix-ups
- SPDX fixups; pwm_bl
- Fix linear brightness levels to include number available; pwm_bl
-----BEGIN PGP SIGNATURE-----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=RKbo
-----END PGP SIGNATURE-----
Merge tag 'backlight-next-5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/backlight
Pull backlight updates from Lee Jones:
"New Functionality:
- Provide support for ACPI enumeration; gpio_backlight
Fix-ups:
- SPDX fixups; pwm_bl
- Fix linear brightness levels to include number available; pwm_bl"
* tag 'backlight-next-5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/backlight:
backlight: pwm_bl: Fix heuristic to determine number of brightness levels
backlight: gpio_backlight: Enable ACPI enumeration
backlight: pwm_bl: Convert to use SPDX identifier
|
||
|
|
9637d51734 |
for-linus-20190715
-----BEGIN PGP SIGNATURE-----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=g8xI
-----END PGP SIGNATURE-----
Merge tag 'for-linus-20190715' of git://git.kernel.dk/linux-block
Pull more block updates from Jens Axboe:
"A later pull request with some followup items. I had some vacation
coming up to the merge window, so certain things items were delayed a
bit. This pull request also contains fixes that came in within the
last few days of the merge window, which I didn't want to push right
before sending you a pull request.
This contains:
- NVMe pull request, mostly fixes, but also a few minor items on the
feature side that were timing constrained (Christoph et al)
- Report zones fixes (Damien)
- Removal of dead code (Damien)
- Turn on cgroup psi memstall (Josef)
- block cgroup MAINTAINERS entry (Konstantin)
- Flush init fix (Josef)
- blk-throttle low iops timing fix (Konstantin)
- nbd resize fixes (Mike)
- nbd 0 blocksize crash fix (Xiubo)
- block integrity error leak fix (Wenwen)
- blk-cgroup writeback and priority inheritance fixes (Tejun)"
* tag 'for-linus-20190715' of git://git.kernel.dk/linux-block: (42 commits)
MAINTAINERS: add entry for block io cgroup
null_blk: fixup ->report_zones() for !CONFIG_BLK_DEV_ZONED
block: Limit zone array allocation size
sd_zbc: Fix report zones buffer allocation
block: Kill gfp_t argument of blkdev_report_zones()
block: Allow mapping of vmalloc-ed buffers
block/bio-integrity: fix a memory leak bug
nvme: fix NULL deref for fabrics options
nbd: add netlink reconfigure resize support
nbd: fix crash when the blksize is zero
block: Disable write plugging for zoned block devices
block: Fix elevator name declaration
block: Remove unused definitions
nvme: fix regression upon hot device removal and insertion
blk-throttle: fix zero wait time for iops throttled group
block: Fix potential overflow in blk_report_zones()
blkcg: implement REQ_CGROUP_PUNT
blkcg, writeback: Implement wbc_blkcg_css()
blkcg, writeback: Add wbc->no_cgroup_owner
blkcg, writeback: Rename wbc_account_io() to wbc_account_cgroup_owner()
...
|
||
|
|
273cbf61c3 |
Merge branch 'i2c/for-5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux
Pull i2c updates from Wolfram Sang: "New stuff from the I2C world: - in the core, getting irqs from ACPI is now similar to OF - new driver for MediaTek MT7621/7628/7688 SoCs - bcm2835, i801, and tegra drivers got some more attention - GPIO API cleanups - cleanups in the core headers - lots of usual driver updates" * 'i2c/for-5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (74 commits) i2c: mt7621: Fix platform_no_drv_owner.cocci warnings i2c: cpm: remove casting dma_alloc dt-bindings: i2c: sun6i-p2wi: Fix the binding example dt-bindings: i2c: mv64xxx: Fix the example compatible i2c: i801: Documentation update i2c: i801: Add support for Intel Tiger Lake i2c: i801: Fix PCI ID sorting dt-bindings: i2c-stm32: document optional dmas i2c: i2c-stm32f7: Add I2C_SMBUS_I2C_BLOCK_DATA support i2c: core: Tidy up handling of init_irq i2c: core: Move ACPI gpio IRQ handling into i2c_acpi_get_irq i2c: core: Move ACPI IRQ handling to probe time i2c: acpi: Factor out getting the IRQ from ACPI i2c: acpi: Use available IRQ helper functions i2c: core: Allow whole core to use i2c_dev_irq_from_resources eeprom: at24: modify a comment referring to platform data dt-bindings: i2c: omap: Add new compatible for J721E SoCs dt-bindings: i2c: mv64xxx: Add YAML schemas dt-bindings: i2c: sun6i-p2wi: Add YAML schemas i2c: mt7621: Add MediaTek MT7621/7628/7688 I2C driver ... |
||
|
|
5fe7b600a1 |
power supply and reset changes for the v5.3 series
Core:
* Add HWMON compat layer
* New properties
- input power limit
- input voltage limit
Drivers:
* qcom-pon: add gen2 support
* New driver for storing reboot move in NVMEM
* New driver for Wilco EC charger configuration
* simplify getting the adapter of a client
-----BEGIN PGP SIGNATURE-----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=fmGg
-----END PGP SIGNATURE-----
Merge tag 'for-v5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply
Pull power supply and reset updates from Sebastian Reichel:
"Core:
- add HWMON compat layer
- new properties:
- input power limit
- input voltage limit
Drivers:
- qcom-pon: add gen2 support
- new driver for storing reboot move in NVMEM
- new driver for Wilco EC charger configuration
- simplify getting the adapter of a client"
* tag 'for-v5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply:
power: reset: nvmem-reboot-mode: add CONFIG_OF dependency
power_supply: wilco_ec: Add charging config driver
power: supply: cros: allow to set input voltage and current limit
power: supply: add input power and voltage limit properties
power: supply: fix semicolon.cocci warnings
power: reset: nvmem-reboot-mode: use NVMEM as reboot mode write interface
dt-bindings: power: reset: add document for NVMEM based reboot-mode
reset: qcom-pon: Add support for gen2 pon
dt-bindings: power: reset: qcom: Add qcom,pm8998-pon compatibility line
power: supply: Add HWMON compatibility layer
power: supply: sbs-manager: simplify getting the adapter of a client
power: supply: rt9455_charger: simplify getting the adapter of a client
power: supply: rt5033_battery: simplify getting the adapter of a client
power: supply: max17042_battery: simplify getting the adapter of a client
power: supply: max17040_battery: simplify getting the adapter of a client
power: supply: max14656_charger_detector: simplify getting the adapter of a client
power: supply: bq25890_charger: simplify getting the adapter of a client
power: supply: bq24257_charger: simplify getting the adapter of a client
power: supply: bq24190_charger: simplify getting the adapter of a client
|
||
|
|
fb4da215ed |
pci-v5.3-changes
-----BEGIN PGP SIGNATURE-----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=ZGxL
-----END PGP SIGNATURE-----
Merge tag 'pci-v5.3-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci
Pull PCI updates from Bjorn Helgaas:
"Enumeration changes:
- Evaluate PCI Boot Configuration _DSM to learn if firmware wants us
to preserve its resource assignments (Benjamin Herrenschmidt)
- Simplify resource distribution (Nicholas Johnson)
- Decode 32 GT/s link speed (Gustavo Pimentel)
Virtualization:
- Fix incorrect caching of VF config space size (Alex Williamson)
- Fix VF driver probing sysfs knobs (Alex Williamson)
Peer-to-peer DMA:
- Fix dma_virt_ops check (Logan Gunthorpe)
Altera host bridge driver:
- Allow building as module (Ley Foon Tan)
Armada 8K host bridge driver:
- add PHYs support (Miquel Raynal)
DesignWare host bridge driver:
- Export APIs to support removable loadable module (Vidya Sagar)
- Enable Relaxed Ordering erratum workaround only on Tegra20 &
Tegra30 (Vidya Sagar)
Hyper-V host bridge driver:
- Fix use-after-free in eject (Dexuan Cui)
Mobiveil host bridge driver:
- Clean up and fix many issues, including non-identify mapped
windows, 64-bit windows, multi-MSI, class code, INTx clearing (Hou
Zhiqiang)
Qualcomm host bridge driver:
- Use clk bulk API for 2.4.0 controllers (Bjorn Andersson)
- Add QCS404 support (Bjorn Andersson)
- Assert PERST for at least 100ms (Niklas Cassel)
R-Car host bridge driver:
- Add r8a774a1 DT support (Biju Das)
Tegra host bridge driver:
- Add support for Gen2, opportunistic UpdateFC and ACK (PCIe protocol
details) AER, GPIO-based PERST# (Manikanta Maddireddy)
- Fix many issues, including power-on failure cases, interrupt
masking in suspend, UPHY settings, AFI dynamic clock gating,
pending DLL transactions (Manikanta Maddireddy)
Xilinx host bridge driver:
- Fix NWL Multi-MSI programming (Bharat Kumar Gogada)
Endpoint support:
- Fix 64bit BAR support (Alan Mikhak)
- Fix pcitest build issues (Alan Mikhak, Andy Shevchenko)
Bug fixes:
- Fix NVIDIA GPU multi-function power dependencies (Abhishek Sahu)
- Fix NVIDIA GPU HDA enablement issue (Lukas Wunner)
- Ignore lockdep for sysfs "remove" (Marek Vasut)
Misc:
- Convert docs to reST (Changbin Du, Mauro Carvalho Chehab)"
* tag 'pci-v5.3-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (107 commits)
PCI: Enable NVIDIA HDA controllers
tools: PCI: Fix installation when `make tools/pci_install`
PCI: dwc: pci-dra7xx: Fix compilation when !CONFIG_GPIOLIB
PCI: Fix typos and whitespace errors
PCI: mobiveil: Fix INTx interrupt clearing in mobiveil_pcie_isr()
PCI: mobiveil: Fix infinite-loop in the INTx handling function
PCI: mobiveil: Move PCIe PIO enablement out of inbound window routine
PCI: mobiveil: Add upper 32-bit PCI base address setup in inbound window
PCI: mobiveil: Add upper 32-bit CPU base address setup in outbound window
PCI: mobiveil: Mask out hardcoded bits in inbound/outbound windows setup
PCI: mobiveil: Clear the control fields before updating it
PCI: mobiveil: Add configured inbound windows counter
PCI: mobiveil: Fix the valid check for inbound and outbound windows
PCI: mobiveil: Clean-up program_{ib/ob}_windows()
PCI: mobiveil: Remove an unnecessary return value check
PCI: mobiveil: Fix error return values
PCI: mobiveil: Refactor the MEM/IO outbound window initialization
PCI: mobiveil: Make some register updates more readable
PCI: mobiveil: Reformat the code for readability
dt-bindings: PCI: mobiveil: Change gpio_slave and apb_csr to optional
...
|
||
|
|
2a3c389a0f |
5.3 Merge window RDMA pull request
A smaller cycle this time. Notably we see another new driver, 'Soft
iWarp', and the deletion of an ancient unused driver for nes.
- Revise and simplify the signature offload RDMA MR APIs
- More progress on hoisting object allocation boiler plate code out of the
drivers
- Driver bug fixes and revisions for hns, hfi1, efa, cxgb4, qib, i40iw
- Tree wide cleanups: struct_size, put_user_page, xarray, rst doc conversion
- Removal of obsolete ib_ucm chardev and nes driver
- netlink based discovery of chardevs and autoloading of the modules
providing them
- Move more of the rdamvt/hfi1 uapi to include/uapi/rdma
- New driver 'siw' for software based iWarp running on top of netdev,
much like rxe's software RoCE.
- mlx5 feature to report events in their raw devx format to userspace
- Expose per-object counters through rdma tool
- Adaptive interrupt moderation for RDMA (DIM), sharing the DIM core
from netdev
-----BEGIN PGP SIGNATURE-----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=iWcG
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma
Pull rdma updates from Jason Gunthorpe:
"A smaller cycle this time. Notably we see another new driver, 'Soft
iWarp', and the deletion of an ancient unused driver for nes.
- Revise and simplify the signature offload RDMA MR APIs
- More progress on hoisting object allocation boiler plate code out
of the drivers
- Driver bug fixes and revisions for hns, hfi1, efa, cxgb4, qib,
i40iw
- Tree wide cleanups: struct_size, put_user_page, xarray, rst doc
conversion
- Removal of obsolete ib_ucm chardev and nes driver
- netlink based discovery of chardevs and autoloading of the modules
providing them
- Move more of the rdamvt/hfi1 uapi to include/uapi/rdma
- New driver 'siw' for software based iWarp running on top of netdev,
much like rxe's software RoCE.
- mlx5 feature to report events in their raw devx format to userspace
- Expose per-object counters through rdma tool
- Adaptive interrupt moderation for RDMA (DIM), sharing the DIM core
from netdev"
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: (194 commits)
RMDA/siw: Require a 64 bit arch
RDMA/siw: Mark expected switch fall-throughs
RDMA/core: Fix -Wunused-const-variable warnings
rdma/siw: Remove set but not used variable 's'
rdma/siw: Add missing dependencies on LIBCRC32C and DMA_VIRT_OPS
RDMA/siw: Add missing rtnl_lock around access to ifa
rdma/siw: Use proper enumerated type in map_cqe_status
RDMA/siw: Remove unnecessary kthread create/destroy printouts
IB/rdmavt: Fix variable shadowing issue in rvt_create_cq
RDMA/core: Fix race when resolving IP address
RDMA/core: Make rdma_counter.h compile stand alone
IB/core: Work on the caller socket net namespace in nldev_newlink()
RDMA/rxe: Fill in wc byte_len with IB_WC_RECV_RDMA_WITH_IMM
RDMA/mlx5: Set RDMA DIM to be enabled by default
RDMA/nldev: Added configuration of RDMA dynamic interrupt moderation to netlink
RDMA/core: Provide RDMA DIM support for ULPs
linux/dim: Implement RDMA adaptive moderation (DIM)
IB/mlx5: Report correctly tag matching rendezvous capability
docs: infiniband: add it to the driver-api bookset
IB/mlx5: Implement VHCA tunnel mechanism in DEVX
...
|
||
|
|
8de262531f |
- Core Frameworks
- Set 'struct device' fwnode when registering a new device
- New Drivers
- Add support for ROHM BD70528 PMIC
- New Device Support
- Add support for LP87561 4-Phase Regulator to TI LP87565 PMIC
- Add support for RK809 and RK817 to Rockchip RK808
- Add support for Lid Angle to ChromeOS core
- Add support for CS47L15 CODEC to Madera core
- Add support for CS47L92 CODEC to Madera core
- Add support for ChromeOS (legacy) Accelerometers in ChromeOS core
- Add support for Add Intel Elkhart Lake PCH to Intel LPSS
- New Functionality
- Provide regulator supply information when registering; madera-core
- Additional Device Tree support; lp87565, madera, cros-ec, rohm,bd71837-pmic
- Allow over-riding power button press via Device Tree; rohm-bd718x7
- Differentiate between running processors; cros_ec_dev
- Fix-ups
- Big header file update; cros_ec_commands.h
- Split header per-subsystem; rohm-bd718x7
- Remove superfluous code; menelaus, cs5535-mfd, cs47lXX-tables
- Trivial; sorting, coding style; intel-lpss-pci
- Only remove Power Off functionality if set locally; rk808
- Make use for Power Off Prepare(); rk808
- Fix spelling mistake in header guards; stmfx
- Properly free IDA resources
- SPDX fixups; cs47lXX-tables, madera
- Error path fixups; hi655x-pmic
- Bug Fixes
- Add missing break in case() statement
- Repair undefined behaviour when not initialising variables; arizona-core, madera-core
- Fix reference to Device Tree documentation; madera
-----BEGIN PGP SIGNATURE-----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=A3jw
-----END PGP SIGNATURE-----
Merge tag 'mfd-next-5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd
Pull MFD updates from Lee Jones:
"Core Frameworks:
- Set 'struct device' fwnode when registering a new device
New Drivers:
- Add support for ROHM BD70528 PMIC
New Device Support:
- Add support for LP87561 4-Phase Regulator to TI LP87565 PMIC
- Add support for RK809 and RK817 to Rockchip RK808
- Add support for Lid Angle to ChromeOS core
- Add support for CS47L15 CODEC to Madera core
- Add support for CS47L92 CODEC to Madera core
- Add support for ChromeOS (legacy) Accelerometers in ChromeOS core
- Add support for Add Intel Elkhart Lake PCH to Intel LPSS
New Functionality:
- Provide regulator supply information when registering; madera-core
- Additional Device Tree support; lp87565, madera, cros-ec, rohm,bd71837-pmic
- Allow over-riding power button press via Device Tree; rohm-bd718x7
- Differentiate between running processors; cros_ec_dev
Fix-ups:
- Big header file update; cros_ec_commands.h
- Split header per-subsystem; rohm-bd718x7
- Remove superfluous code; menelaus, cs5535-mfd, cs47lXX-tables
- Trivial; sorting, coding style; intel-lpss-pci
- Only remove Power Off functionality if set locally; rk808
- Make use for Power Off Prepare(); rk808
- Fix spelling mistake in header guards; stmfx
- Properly free IDA resources
- SPDX fixups; cs47lXX-tables, madera
- Error path fixups; hi655x-pmic
Bug Fixes:
- Add missing break in case() statement
- Repair undefined behaviour when not initialising variables; arizona-core, madera-core
- Fix reference to Device Tree documentation; madera"
* tag 'mfd-next-5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (45 commits)
mfd: hi655x-pmic: Fix missing return value check for devm_regmap_init_mmio_clk
mfd: madera: Fixup SPDX headers
mfd: madera: Remove some unused registers and fix some defaults
mfd: intel-lpss: Release IDA resources
mfd: intel-lpss: Add Intel Elkhart Lake PCH PCI IDs
mfd: cs5535-mfd: Remove ifdef OLPC noise
mfd: stmfx: Fix macro definition spelling
dt-bindings: mfd: Add link to ROHM BD71847 Datasheet
MAINAINERS: Swap words in INTEL PMIC MULTIFUNCTION DEVICE DRIVERS
mfd: cros_ec_dev: Register cros_ec_accel_legacy driver as a subdevice
mfd: rk808: Prepare rk805 for poweroff
mfd: rk808: Check pm_power_off pointer
mfd: cros_ec: differentiate SCP from EC by feature bit
dt-bindings: Add binding for cros-ec-rpmsg
mfd: madera: Add Madera core support for CS47L92
mfd: madera: Add Madera core support for CS47L15
mfd: madera: Update DT bindings to add additional CODECs
mfd: madera: Add supply mapping for MICVDD
mfd: madera: Fix potential uninitialised use of variable
mfd: madera: Fix bad reference to pinctrl.txt file
...
|
||
|
|
be8454afc5 |
drm main pull request for v5.3-rc1 (sans mm changes)
-----BEGIN PGP SIGNATURE----- iQIcBAABAgAGBQJdLMSbAAoJEAx081l5xIa+udkP/iWr8mw44tWYb8Wuzc/aR91v 02X/J4S9XTQttNn/1Gpq9ItTLMf0Gc08tk1wEBBHAWi/qGaGZS2al+rv0afeuuQa aFhQzioDi7K/YZt92iEJhdx7wVMyydICTg3INmYlSP7/FyzLp6gBQRGSJ1kX5mHZ qWsFZgUOH9V5evyB6fDMleDaqFOKfcwrD7XYwbOheL/HeYQSv5AYn3VBupBFQ76L 0hclI5VzZQ5V0nnqRTNDQVA9Yl6NTl+2eXTn5vuBtwKXEI6JJw8eihZp2oZDXqfS L441w7wGbkRPzN5kjMZjs1ToPMTlMveR5kL6Sc+o3DT/HmIr1odeaSDXR/93UOLd z0CRJ6xMC8h1ThLNHp8UgbxCKqIwYPsY2wVqjsJt7lDY5jma7Yv2YJ9ocYGHN/sO DVHcU6ugbwvuC5wZZtVZl5J4hjnBZwNRGSVK+iM0tkjalgdEuSFehXT7eQ8SphF/ yI5gD1xNEwGfZ4bvZ3u/QrDCcpUAgPIUYmxEa2tPJILQWOJ9O87yc0y9Z21k9Ef1 9yDqrFV3sPqC2xj/0ufZG/18+Yt99Ykg1jQE3RGDwD/59KAeqPbOvqTKyVODV9jE qje6ScSIc2G0713uss2bcaD3k+rCB5YL2JkKrk5OWW/T2+n9T+JFaiNh7dnSFFcU gBKyeY24OyCDMwXrby0K =SI+Y -----END PGP SIGNATURE----- Merge tag 'drm-next-2019-07-16' of git://anongit.freedesktop.org/drm/drm Pull drm updates from Dave Airlie: "The biggest thing in this is the AMD Navi GPU support, this again contains a bunch of header files that are large. These are the new AMD RX5700 GPUs that just recently became available. New drivers: - ST-Ericsson MCDE driver - Ingenic JZ47xx SoC UAPI change: - HDR source metadata property Core: - HDR inforframes and EDID parsing - drm hdmi infoframe unpacking - remove prime sg_table caching into dma-buf - New gem vram helpers to reduce driver code - Lots of drmP.h removal - reservation fencing fix - documentation updates - drm_fb_helper_connector removed - mode name command handler rewrite fbcon: - Remove the fbcon notifiers ttm: - forward progress fixes dma-buf: - make mmap call optional - debugfs refcount fixes - dma-fence free with pending signals fix - each dma-buf gets an inode Panels: - Lots of additional panel bindings amdgpu: - initial navi10 support - avoid hw reset - HDR metadata support - new thermal sensors for vega asics - RAS fixes - use HMM rather than MMU notifier - xgmi topology via kfd - SR-IOV fixes - driver reload fixes - DC use a core bpc attribute - Aux fixes for DC - Bandwidth calc updates for DC - Clock handling refactor - kfd VEGAM support vmwgfx: - Coherent memory support changes i915: - HDR Support - HDMI i2c link - Icelake multi-segmented gamma support - GuC firmware update - Mule Creek Canyon PCH support for EHL - EHL platform updtes - move i915.alpha_support to i915.force_probe - runtime PM refactoring - VBT parsing refactoring - DSI fixes - struct mutex dependency reduction - GEM code reorg mali-dp: - Komeda driver features msm: - dsi vs EPROBE_DEFER fixes - msm8998 snapdragon 835 support - a540 gpu support - mdp5 and dpu interconnect support exynos: - drmP.h removal tegra: - misc fixes tda998x: - audio support improvements - pixel repeated mode support - quantisation range handling corrections - HDMI vendor info fix armada: - interlace support fix - overlay/video plane register handling refactor - add gamma support rockchip: - RX3328 support panfrost: - expose perf counters via hidden ioctls vkms: - enumerate CRC sources list ast: - rework BO handling mgag200: - rework BO handling dw-hdmi: - suspend/resume support rcar-du: - R8A774A1 Soc Support - LVDS dual-link mode support - Additional formats - Misc fixes omapdrm: - DSI command mode display support stm - fb modifier support - runtime PM support sun4i: - use vmap ops vc4: - binner bo binding rework v3d: - compute shader support - resync/sync fixes - job management refactoring lima: - NULL pointer in irq handler fix - scheduler default timeout virtio: - fence seqno support - trace events bochs: - misc fixes tc458767: - IRQ/HDP handling sii902x: - HDMI audio support atmel-hlcdc: - misc fixes meson: - zpos support" * tag 'drm-next-2019-07-16' of git://anongit.freedesktop.org/drm/drm: (1815 commits) Revert "Merge branch 'vmwgfx-next' of git://people.freedesktop.org/~thomash/linux into drm-next" Revert "mm: adjust apply_to_pfn_range interface for dropped token." mm: adjust apply_to_pfn_range interface for dropped token. drm/amdgpu/navi10: add uclk activity sensor drm/amdgpu: properly guard the generic discovery code drm/amdgpu: add missing documentation on new module parameters drm/amdgpu: don't invalidate caches in RELEASE_MEM, only do the writeback drm/amd/display: avoid 64-bit division drm/amdgpu/psp11: simplify the ucode register logic drm/amdgpu: properly guard DC support in navi code drm/amd/powerplay: vega20: fix uninitialized variable use drm/amd/display: dcn20: include linux/delay.h amdgpu: make pmu support optional drm/amd/powerplay: Zero initialize current_rpm in vega20_get_fan_speed_percent drm/amd/powerplay: Zero initialize freq in smu_v11_0_get_current_clk_freq drm/amd/powerplay: Use memset to initialize metrics structs drm/amdgpu/mes10.1: Fix header guard drm/amd/powerplay: add temperature sensor support for navi10 drm/amdgpu: fix scheduler timeout calc drm/amdgpu: Prepare for hmm_range_register API change (v2) ... |
||
|
|
3729fe2bc2 |
Revert "Merge branch 'vmwgfx-next' of git://people.freedesktop.org/~thomash/linux into drm-next"
This reverts commit |
||
|
|
7e4b4dfc98 |
Revert "mm: adjust apply_to_pfn_range interface for dropped token."
This reverts commit
|
||
|
|
6dfc43d3a1 |
mm: adjust apply_to_pfn_range interface for dropped token.
mm/pgtable: drop pgtable_t variable from pte_fn_t functions drops the token came in via the hmm tree, this caused lots of conflicts, but applying this cleanup patch should reduce it to something easier to handle. Just accept the token is unused at this point. Signed-off-by: Dave Airlie <airlied@redhat.com> |
||
|
|
fec88ab0af |
HMM patches for 5.3
Improvements and bug fixes for the hmm interface in the kernel:
- Improve clarity, locking and APIs related to the 'hmm mirror' feature
merged last cycle. In linux-next we now see AMDGPU and nouveau to be
using this API.
- Remove old or transitional hmm APIs. These are hold overs from the past
with no users, or APIs that existed only to manage cross tree conflicts.
There are still a few more of these cleanups that didn't make the merge
window cut off.
- Improve some core mm APIs:
* export alloc_pages_vma() for driver use
* refactor into devm_request_free_mem_region() to manage
DEVICE_PRIVATE resource reservations
* refactor duplicative driver code into the core dev_pagemap
struct
- Remove hmm wrappers of improved core mm APIs, instead have drivers use
the simplified API directly
- Remove DEVICE_PUBLIC
- Simplify the kconfig flow for the hmm users and core code
-----BEGIN PGP SIGNATURE-----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=wKvp
-----END PGP SIGNATURE-----
Merge tag 'for-linus-hmm' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma
Pull HMM updates from Jason Gunthorpe:
"Improvements and bug fixes for the hmm interface in the kernel:
- Improve clarity, locking and APIs related to the 'hmm mirror'
feature merged last cycle. In linux-next we now see AMDGPU and
nouveau to be using this API.
- Remove old or transitional hmm APIs. These are hold overs from the
past with no users, or APIs that existed only to manage cross tree
conflicts. There are still a few more of these cleanups that didn't
make the merge window cut off.
- Improve some core mm APIs:
- export alloc_pages_vma() for driver use
- refactor into devm_request_free_mem_region() to manage
DEVICE_PRIVATE resource reservations
- refactor duplicative driver code into the core dev_pagemap
struct
- Remove hmm wrappers of improved core mm APIs, instead have drivers
use the simplified API directly
- Remove DEVICE_PUBLIC
- Simplify the kconfig flow for the hmm users and core code"
* tag 'for-linus-hmm' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: (42 commits)
mm: don't select MIGRATE_VMA_HELPER from HMM_MIRROR
mm: remove the HMM config option
mm: sort out the DEVICE_PRIVATE Kconfig mess
mm: simplify ZONE_DEVICE page private data
mm: remove hmm_devmem_add
mm: remove hmm_vma_alloc_locked_page
nouveau: use devm_memremap_pages directly
nouveau: use alloc_page_vma directly
PCI/P2PDMA: use the dev_pagemap internal refcount
device-dax: use the dev_pagemap internal refcount
memremap: provide an optional internal refcount in struct dev_pagemap
memremap: replace the altmap_valid field with a PGMAP_ALTMAP_VALID flag
memremap: remove the data field in struct dev_pagemap
memremap: add a migrate_to_ram method to struct dev_pagemap_ops
memremap: lift the devmap_enable manipulation into devm_memremap_pages
memremap: pass a struct dev_pagemap to ->kill and ->cleanup
memremap: move dev_pagemap callbacks into a separate structure
memremap: validate the pagemap type passed to devm_memremap_pages
mm: factor out a devm_request_free_mem_region helper
mm: export alloc_pages_vma
...
|
||
|
|
fa6e951a2a |
- Fix error handling when ecryptfs_read_lower() encounters an error
- Fix read-only file creation when the eCryptfs mount is configured to store metadata in xattrs - Minor code cleanups -----BEGIN PGP SIGNATURE----- Version: GnuPG v1 iQIcBAABCgAGBQJdK9CKAAoJENaSAD2qAscK6c0P/R7TCVq7hj8HW78dGxcfMK6S 5ASSlTS5lbb9UKdlluFt58XNSpoH4aNACwmwsYCbRJiwfddndnMayQC9lu+8mnjs nBzNo3atZeC4x2SZxdUOCpAfeAT4eaclkVC5GnIaF4dpBePkj/+PVzBrCDkMq/fx c9oz56Z7t+V9Urv6904fr/WBl1UmCfgMqYuoyFiApdhWJirLCsG/1/GJHgio50tu CvZK7jckF8yePBlovSYpDaPP6+w1Y+XDbQ4ATo5984KEBnApR1HxwbY5AgH2ZSVw 7PEVRa1FdNS9OTh79R0VAz4jKZumgN/fCPGzd2sMbymZcQdhQThpMPbRwY17yTIO 9MGsVIG7ZZfosR5g3t5xJ2jq/uc5KCGQ+FGshwn0WrTa3VyA5sACS66co18ZEo3f G3K7oZG6BqPBytSzPp/uAl1a2CkIJjQX1Q0ywrzZXe2vS6NSZZKl0rkIcM+HiqSl xjznVpQp1hEURdrRu26/th/pIf5DoyjTULo5E7UG9Br0tk7VUXTZjq5nTDlIKL1C 2rwVUOSQS4Hr1LA+01UAK+Vda+XOvJpsMzLhp8P6q7ozRMKyZ5KfeqdLXgOIxVNH 1LUdur2wQHpImsrs71fRCPiZ961FulsYC4XPAqm7tTXfd5X3v062PAmwQQVpj4l0 qlBQz3bkkB40I0yezd+A =C+HK -----END PGP SIGNATURE----- Merge tag 'ecryptfs-5.3-rc1-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tyhicks/ecryptfs Pull eCryptfs updates from Tyler Hicks: - Fix error handling when ecryptfs_read_lower() encounters an error - Fix read-only file creation when the eCryptfs mount is configured to store metadata in xattrs - Minor code cleanups * tag 'ecryptfs-5.3-rc1-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tyhicks/ecryptfs: ecryptfs: Change return type of ecryptfs_process_flags ecryptfs: Make ecryptfs_xattr_handler static ecryptfs: remove unnessesary null check in ecryptfs_keyring_auth_tok_for_sig ecryptfs: use print_hex_dump_bytes for hexdump eCryptfs: fix permission denied with ecryptfs_xattr mount option when create readonly file ecryptfs: re-order a condition for static checkers eCryptfs: fix a couple type promotion bugs |
||
|
|
a318423b61 |
This pull request contains the following changes for UBIFS
- Support for zstd compression - Support for offline signed filesystems - Various fixes for regressions -----BEGIN PGP SIGNATURE----- iQJKBAABCAA0FiEEdgfidid8lnn52cLTZvlZhesYu8EFAl0reJsWHHJpY2hhcmRA c2lnbWEtc3Rhci5hdAAKCRBm+VmF6xi7wTcMD/0XMJTpaPcw2oAvlWld8i223qIe 5cwrtDD8JU1/3LXaFf0cfFhT8SklH+X0UgEVorfLVSNZwmpym8I8PxKTxZ5thc4V tVvVC8PqVel/2jXXzxSKJUNclzI1eCBMhC0dC2Sdl2FnoTTRyKBT9H2eKdZD8wCd 4SWrTv1f9RAwTerPF1r7LaTXXreAdQYXxpVFAJBiV8+K+7VHiC+PLb3SgcRazayc kJnG8pF/IHiqSVBmzbLwX+5RRuRmS7wbTu4OcBNEyq9jy5/w7gmgCW3uQhownuo+ +4hEE/4d4yJb8cybYVrRLxUslv/EuB8aLhZ/bvi+D6eDNXBU/VANtWSZU63GCseD PC4RYAPAGfBWi/o7Rs+xm2Kxr8FIW4q9WHtM7j0fElcwIbR+nckQRrEJ13kFuFs7 1TWbpd0Y0v/Ip+Xcut19Gaxap1Yk04JK9wvqLmfHxOqdkznJWKpQ3pAlsXtFfTZv DODYkTFfbp2z1tXZHN4Fu/aZ2w2/Rx/OKci8XIa3Fe2VgyZccm4G+6zl1HICbmKl /3jmcDi7E6OlFnv2ujDVQC3fA2CiqEgBCVx9E+bxzHROvdWXIrbU9RTiqMDKtYcc FD8HJI9PXefxy+Ca0gCf5MA31ION0+TFyP+udeU1SIGm8n/SX8u0FEbm9bOs6kWT NIZjp0wlQQg4bTq4lg== =rllw -----END PGP SIGNATURE----- Merge tag 'upstream-5.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rw/ubifs Pull UBIFS updates from Richard Weinberger: - Support for zstd compression - Support for offline signed filesystems - Various fixes for regressions * tag 'upstream-5.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rw/ubifs: ubifs: Don't leak orphans on memory during commit ubifs: Check link count of inodes when killing orphans. ubifs: Add support for zstd compression. ubifs: support offline signed images ubifs: remove unnecessary check in ubifs_log_start_commit ubifs: Fix typo of output in get_cs_sqnum ubifs: Simplify redundant code ubifs: Correctly use tnc_next() in search_dh_cookie() |
||
|
|
f2772a0e48 |
This pull request contains the following changes for UML:
- A new timer mode, time travel, for testing with UML - Many bugixes/improvements for the serial line driver - Various bugfixes -----BEGIN PGP SIGNATURE----- iQJKBAABCAA0FiEEdgfidid8lnn52cLTZvlZhesYu8EFAl0reewWHHJpY2hhcmRA c2lnbWEtc3Rhci5hdAAKCRBm+VmF6xi7wd4QEAC2KZoi6omge+nD7+tglfAdbZ0E X2HE3clA2tE5KqbgasT1IGZeZ/JE5wzjYJ38U1qdHd9RPeerX/snib4vyru4FSMd a39wjNbaqP/csPMLBukYEGs7Y4sSl1KzkRUdS9XkskCymkduhYyNbCc2WPMvAwBG xw6ffQzY/+zvC0e974jygjKbIEpU+uQ9LzwLnCKM/qKih4owwSA6Rj3tZwBSSQdG 0BKR3o2J06ZXBiJjW+5vyMRU7N5Id/t6hf9OBhLqRk1YbfbebjVRNR2ghLSNvCF+ 3arPlE4T9tsjuZY+CCZh2LrrG8gzTx1M8pVlSFdgtqKCCp7MO40Q9cIhjmMYevym Zct8iLUtSUuIHU4/q2k7LeSPOiF6eEjbuVj2aEFTc8LSg/zYG/lF7xXESPkm2pf+ eYQN2f8ML9fL183nEVkRxXhZwqCKSS7ktcKO0bRj3UsbdiJxRVvfe1POTWsvvuVi uV5YHgFBAhqcVabM2F9dOwk/4JRnNqJTGAUAVOwiyvk64sXLp/44DM/GbHgPMkSH uVqt70Yzt07RZ/2xDODW51xFx3WgbvmsKB6zN4Y7CAuc0CXBOSc61xgNFVhQdTrP sfAph4yUGs9mMyhFrdTVZaleZXA3Eo3V5FRvrESNNj53UzD2dRFKO065t58YMFuS UTqTJA2AHsJQ9j2TRA== =xxGu -----END PGP SIGNATURE----- Merge tag 'for-linus-5.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rw/uml Pull UML updates from Richard Weinberger: - A new timer mode, time travel, for testing with UML - Many bugixes/improvements for the serial line driver - Various bugfixes * tag 'for-linus-5.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rw/uml: um: fix build without CONFIG_UML_TIME_TRAVEL_SUPPORT um: Fix kcov crash during startup um: configs: Remove useless UEVENT_HELPER_PATH um: Support time travel mode um: Pass nsecs to os timer functions um: Remove drivers/ssl.h um: Don't garbage collect in deactivate_all_fds() um: Silence lockdep complaint about mmap_sem um: Remove locking in deactivate_all_fds() um: Timer code cleanup um: fix os_timer_one_shot() um: Fix IRQ controller regression on console read |
||
|
|
fcd98147ac |
stream_open related bits for Linux 5.3
- the first one converts stream_open.cocci to treat all functions that start with wait_.* as blocking. Previously it was only wait_event_.* functions that were considered as blocking, but this was falsely reporting several deadlock cases as only warning. The patch was picked by linux-kbuild and entered mainline as |
||
|
|
5516745311 |
platform-drivers-x86 for v5.3-1
ASUS WMI driver got a big refactoring in order to support the TUF Gaming laptops. Besides that, the regression with backlight being permanently off on various EeePC laptops has been fixed. Accelerometer on HP ProBook 450 G0 shows wrong measurements due to X axis being inverted. This has been fixed. Intel PMC core driver has been extended to be ACPI enumerated if the DSDT provides device with _HID "INT33A1". This allows to convert the driver to be pure platform and support new hardware purely based on ACPI DSDT. From now on the Intel Speed Select Technology is supported thru a corresponding driver. This driver provides an access to the features of the ISST, such as Performance Profile, Core Power, Base frequency and Turbo Frequency. Mellanox platform drivers has been refactored and now extended to support more systems, including new coming ones. The OLPC XO-1.75 platform is now supported. CB4063 Beckhoff Automation board is using PMC clocks, provided via pmc_atom driver, for ethernet controllers in a way that they can't be managed by the clock driver. The quirk has been extended to cover this case. Touchscreen on Chuwi Hi10 Plus tablet has been enabled. Meanwhile the information of Chuwi Hi10 Air has been fixed to cover more models based on the same platform. Xiaomi notebooks have WMI interface enabled. Thus, the driver to support it has been provided. It required some extension of the generic WMI library, which allows to propagate opaque context to the ->probe() of the individual drivers. This release includes debugfs clean up from Greg KH for several drivers that drop return code check and make debugfs absence or failure non-fatal. Miscellaneous fixes here and there, mostly for Acer WMI and various Intel drivers. The listed below commits are duplicated due to previously pushed fixes in v5.2 cycle: - |
||
|
|
fde7dc63b1 |
- stm32: race fix by adding a spinlock
- mhu: trim included headers - omap: add support for K3 SoCs - imx: Irq disable fix - bcm: tidy up extracting driver data - tegra: make resume 'noirq' - api: fix error handling -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEE6EwehDt/SOnwFyTyf9lkf8eYP5UFAl0qaioACgkQf9lkf8eY P5VT2Q//WJPFy/aB12RGN4hOrF2dLmk92AEWVDQDifbEbvKXOSJo9Qk8ebUgfPiG U3bjnYjvFm9b64yaFCw3PRvu52jPa/oMCUHgyi/cbqzbKQmTonmCaU/E60RCHukR 3A3aQR59cLxxt+WM7Gb36USPZkF6E4x7WJx7xPGLclkeXlcuqCDYZ77K+R3WGUPI gldCwF6cNxmimLHm9WGwkA9hw4aE/h4U4Nu2MJn5VPNSKU93GfAJ7X59SMzn93tO dbUODDYYwvUSn6voXbrvICe1Z+a9xCTLj9bS0NIM8ND3zlfZeuvogCIlwt5fLmOb 365rMMr0xyVLBokBBJVFvqqv8rX5z+XHbGzrWYB6hErmQH3rnzWIuauiN7ic5Pn8 ml8gLYpeJzUt2fRiW8mNR/AMjpLOsQOrVOrUfT7I2MKNTv4t0aiEXhIxaqesZjot NAifa9jUZ4OMgdt+Q53aoJCvuZwEN+9lOCKRQ/UmKArQVJkAdoX2yoVwMYfSMkr1 X8rPX5VJ1HrP8yQtXO4LK4y+D7l7TERatG5XYBXWJV6Sv7u6Xq1XX2LGv/O5NWBy YGRwzBkIlxK6WnVhg/xwoZnoRmXpTnQlG86d6H2XkzQJrt0VxvFz8QXulH665lNe dfEBSMEVnk7FBj3zpgW+kvpUfsdpUkEjeK3W4iIOlQAYjYuIQ24= =ZkSQ -----END PGP SIGNATURE----- Merge tag 'mailbox-v5.3' of git://git.linaro.org/landing-teams/working/fujitsu/integration Pull mailbox updates from Jassi Brar: - stm32: race fix by adding a spinlock - mhu: trim included headers - omap: add support for K3 SoCs - imx: Irq disable fix - bcm: tidy up extracting driver data - tegra: make resume 'noirq' - api: fix error handling * tag 'mailbox-v5.3' of git://git.linaro.org/landing-teams/working/fujitsu/integration: mailbox: handle failed named mailbox channel request mailbox: tegra: avoid resume NULL mailboxes mailbox: tegra: hsp: add noirq resume mailbox: bcm-flexrm-mailbox: using dev_get_drvdata directly mailbox: imx: Clear GIEn bit at shutdown mailbox: omap: Add support for TI K3 SoCs dt-bindings: mailbox: omap: Update bindings for TI K3 SoCs mailbox: arm_mhu: reorder header inclusion and drop unneeded ones mailbox: stm32_ipcc: add spinlock to fix channels concurrent access |
||
|
|
a1240cf74e |
Merge branch 'for-5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/dennis/percpu
Pull percpu updates from Dennis Zhou: "This includes changes to let percpu_ref release the backing percpu memory earlier after it has been switched to atomic in cases where the percpu ref is not revived. This will help recycle percpu memory earlier in cases where the refcounts are pinned for prolonged periods of time" * 'for-5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/dennis/percpu: percpu_ref: release percpu memory early without PERCPU_REF_ALLOW_REINIT md: initialize percpu refcounters using PERCU_REF_ALLOW_REINIT io_uring: initialize percpu refcounters using PERCU_REF_ALLOW_REINIT percpu_ref: introduce PERCPU_REF_ALLOW_REINIT flag |
||
|
|
1d03985933 |
Merge branch 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull perf fixes from Ingo Molnar: "A number of PMU driver corner case fixes, a race fix, an event grouping fix, plus a bunch of tooling fixes/updates" * 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (30 commits) perf/x86/intel: Fix spurious NMI on fixed counter perf/core: Fix exclusive events' grouping perf/x86/amd/uncore: Set the thread mask for F17h L3 PMCs perf/x86/amd/uncore: Do not set 'ThreadMask' and 'SliceMask' for non-L3 PMCs perf/core: Fix race between close() and fork() perf intel-pt: Fix potential NULL pointer dereference found by the smatch tool perf intel-bts: Fix potential NULL pointer dereference found by the smatch tool perf script: Assume native_arch for pipe mode perf scripts python: export-to-sqlite.py: Fix DROP VIEW power_events_view perf scripts python: export-to-postgresql.py: Fix DROP VIEW power_events_view perf hists browser: Fix potential NULL pointer dereference found by the smatch tool perf cs-etm: Fix potential NULL pointer dereference found by the smatch tool perf parse-events: Remove unused variable: error perf parse-events: Remove unused variable 'i' perf metricgroup: Add missing list_del_init() when flushing egroups list perf tools: Use list_del_init() more thorougly perf tools: Use zfree() where applicable tools lib: Adopt zalloc()/zfree() from tools/perf perf tools: Move get_current_dir_name() cond prototype out of util.h perf namespaces: Move the conditional setns() prototype to namespaces.h ... |