Sleeping for < 10us use udelay, for 10us to 20ms use usleep_range() and
for > 10ms use msleep. flseep() will call the particular API based on
the above condition. (Documentation/timers/timers-howto.rst)
Aux RD Interval value depends on the value read from the dpcd register
which is updated from the sink device, hence use flseep.
Co-developed-by: Srikanth V NagaVenkata <nagavenkata.srikanth.v@intel.com>
Signed-off-by: Arun R Murthy <arun.r.murthy@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Suraj Kandpal <suraj.kandpal@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240925034432.1777029-2-arun.r.murthy@intel.com
Move intel_power_domains_{suspend,resume} to inside
intel_display_power_{suspend_late, resume_early}.
With this also change the VLV suspend failure to call
the intel_display_power_resume_early. In the end, the only
function executed there for VLV is the intel_power_domains_resume.
Besides make the code more consistency give the call that was
immediately before: intel_display_power_suspend_late.
Reviewed-by: Jonathan Cavitt <jonathan.cavitt@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241113225016.208673-7-rodrigo.vivi@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
These save & restore functions inside i915_suspend are old display
functions to save and restore a bunch of display related registers.
Move it under display and rename accordantly. Just don't move it
entirely towards intel_display struct yet because it depends
on drm_i915_private for the IS_MOBILE.
While doing this conversion also update the MIT header using
the new SPDX ones.
v2: Fix Makefile and include (Jani)
Removed vga and gmbus (Jani, Ville)
Cc: Jesse Barnes <jbarnes@virtuousgeek.org>
Cc: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Jonathan Cavitt <jonathan.cavitt@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241113225016.208673-2-rodrigo.vivi@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Restrict this function to only save and restore registers
functionality. Then, that can be moved out later to under
display with a proper name.
Cc: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Jonathan Cavitt <jonathan.cavitt@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241113225016.208673-1-rodrigo.vivi@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
While forcing DSC when it is not actually required, the max compressed
bpp from the source gets picked for compression for some pipe bpps.
Apparently, when DSC is not required, forcing DSC to the maximum compressed
bpp seems to cause underruns.
To avoid this, limit the max compressed bpp to 18 while forcing DSC. This
value works across platforms with different pipe bpps and prevents
underruns.
Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Reviewed-by: Naga Venkata Srikanth V <nagavenkata.srikanth.v@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241030084100.1361689-1-ankit.k.nautiyal@intel.com
The fake encoders pretty much match individual MST streams. The encoders
remain as fake as ever, but change the naming to MST stream
encoders. Rename all the encoder hooks and related functions called from
them to mst_stream_* to clarify what type of encoders the hooks are
called on.
Reviewed-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/37d9572e884ca2fdd84ea6722b4b7cefde04eed9.1731409802.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Add helpers to_primary_encoder() and to_primary_dp() to convert fake MST
encoder pointers to primary encoder and DP pointers, respectively, and
use them.
The main point is to highlight the primary encoder and DP usage. Very
few places actually need the struct intel_dp_mst_encoder pointer, or the
primary struct intel_digital_port, so ditch them where possible for
clarity.
Reviewed-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/ff8786c04bae053055783f720f89a4d9f9815c70.1731409802.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Identify mobile platforms separately in display, using the platform
group mechanism. This enables dropping the dependency on i915_drv.h
IS_MOBILE() from display code.
v2: Make snb_display static (kernel test robot)
Reviewed-by: Vinod Govindapillai <vinod.govindapillai@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/2389fd58446e83a79ec57bc0b037679662037b9e.1731321183.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Identify discrete graphics separately in display, using the platform
group mechanism. This enables dropping the dependency on i915_drv.h
IS_DGFX() from display code.
Start grouping platform groups separately in INTEL_DISPLAY_PLATFORMS()
in anticipation of more groups to come.
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/c02230d26cc0d9dbd7ddcc064661b2ad03739b6a.1731321183.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Make sure that the first read/write in hdcp2_authentication_key_exchange
are only retried when we have either DP/DPMST encoder connected,
since we do this to give docks and dp encoders some extra time to
get their HDCP DPCD registers ready only for DP/DPMST encoders as
this issue is only observed here no need to burden other encoders
with extra retries as this causes the HDMI connector to have some
other timing issue and fails HDCP authentication.
--v2
-Add intent of patch [Chaitanya]
-Add reasoning for loop [Jani]
-Make sure we forfiet the 50ms wait for non DP/DPMST encoders.
--v3
-Remove the is_dp_encoder check [Jani/Chaitanya]
-Make the commit message more clearer [Jani]
Fixes: 9d5a05f86d ("drm/i915/hdcp: Retry first read and writes to downstream")
Signed-off-by: Suraj Kandpal <suraj.kandpal@intel.com>
Reviewed-by: Chaitanya Kumar Borah <chaitanya.kumar.borah@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241104035951.517837-1-suraj.kandpal@intel.com
intel_atomic_setup_scalers() is currently messing around with
the internals of the atomic states. Stop doing that and instead
use the regular interfaces so that we don't need to know any ugly
implementation details.
Reviewed-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241107122658.21901-5-ville.syrjala@linux.intel.com
intel_atomic_setup_scalers() currently digs out the full atomic
state from the crtc state. Flip that on its head so that we instead
pass in the full atomic state and dig out the crtc state (and whatever
else we need). This is generallte the better approach as it works
in all phases of the atomic commit, whereas the other apporoach only
really works during .atomic_check().
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241107122658.21901-4-ville.syrjala@linux.intel.com
ADPA_HOTPLUG_BITS is defined in terms of the individual
register bits and is defined in intel_crt.c, whereas the
counterpart mask (ADPA_CRT_HOTPLUG_MASK) is just defined
as a raw hex constant and lives in i915_reg.h. Just define
both the same way (with unified name to boot) and move both
to intel_crt.c since they are more an implementation detail
rather than anything to do with the actual register definitions.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241107161123.16269-6-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
