Think SMC_WR_BUF_CNT_SEND := SMC_WR_BUF_CNT used in send context and
SMC_WR_BUF_CNT_RECV := 3 * SMC_WR_BUF_CNT used in recv context. Those
get replaced with lgr->max_send_wr and lgr->max_recv_wr respective.
Please note that although with the default sysctl values
qp_attr.cap.max_send_wr == qp_attr.cap.max_recv_wr is maintained but
can not be assumed to be generally true any more. I see no downside to
that, but my confidence level is rather modest.
Signed-off-by: Halil Pasic <pasic@linux.ibm.com>
Reviewed-by: Sidraya Jayagond <sidraya@linux.ibm.com>
Reviewed-by: Dust Li <dust.li@linux.alibaba.com>
Tested-by: Mahanta Jambigi <mjambigi@linux.ibm.com>
Link: https://patch.msgid.link/20251027224856.2970019-2-pasic@linux.ibm.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Subbaraya Sundeep says:
====================
Add CN20K NIX and NPA contexts
The hardware contexts of blocks NIX and NPA in CN20K silicon are
different than that of previous silicons CN10K and CN9XK. This
patchset adds the new contexts of CN20K in AF and PF drivers.
A new mailbox for enqueuing contexts to hardware is added.
Patch 1 simplifies context writing and reading by using max context
size supported by hardware instead of using each context size.
Patch 2 and 3 adds NIX block contexts in AF driver and extends
debugfs to display those new contexts
Patch 4 and 5 adds NPA block contexts in AF driver and extends
debugfs to display those new contexts
Patch 6 omits NDC configuration since CN20K NPA does not use NDC
for caching its contexts
Patch 7 and 8 uses the new NIX and NPA contexts in PF/VF driver.
Patch 9, 10 and 11 are to support more bandwidth profiles present in
CN20K for RX ratelimiting and to display new profiles in debugfs
v3: https://lore.kernel.org/all/1752772063-6160-1-git-send-email-sbhatta@marvell.com/
====================
Link: https://patch.msgid.link/1761388367-16579-1-git-send-email-sbhatta@marvell.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Receive queue points to a bandwidth profile for rate limiting.
Since cn20k has additional bandwidth profiles use them
too while mapping receive queue to bandwidth profile.
Signed-off-by: Subbaraya Sundeep <sbhatta@marvell.com>
Link: https://patch.msgid.link/1761388367-16579-12-git-send-email-sbhatta@marvell.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
CN20K has 16k of leaf profiles, 2k of middle profiles and
256 of top profiles. This patch modifies existing receive
queue and bandwidth profile context structures to accommodate
additional profiles of cn20k.
Signed-off-by: Subbaraya Sundeep <sbhatta@marvell.com>
Link: https://patch.msgid.link/1761388367-16579-10-git-send-email-sbhatta@marvell.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
With new CN20K NPA pool and aura contexts supported in AF
driver this patch modifies PF driver to use new NPA contexts.
Implement new hw_ops for intializing aura and pool contexts
for all the silicons.
Signed-off-by: Linu Cherian <lcherian@marvell.com>
Signed-off-by: Subbaraya Sundeep <sbhatta@marvell.com>
Link: https://patch.msgid.link/1761388367-16579-8-git-send-email-sbhatta@marvell.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
For cn20k, NPA block doesn't use the general purpose
NDC (Near Coprocessor Bus Data cache Unit) for caching,
hence skip the NDC related operations.
Also refactor NDC configuration code to a helper function.
Signed-off-by: Linu Cherian <lcherian@marvell.com>
Signed-off-by: Subbaraya Sundeep <sbhatta@marvell.com>
Link: https://patch.msgid.link/1761388367-16579-7-git-send-email-sbhatta@marvell.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
New CN20K silicon has NPA hardware context structures different from
previous silicons. Add NPA aura and pool context definitions for cn20k.
Extend NPA context handling support to cn20k.
Signed-off-by: Linu Cherian <lcherian@marvell.com>
Signed-off-by: Subbaraya Sundeep <sbhatta@marvell.com>
Link: https://patch.msgid.link/1761388367-16579-5-git-send-email-sbhatta@marvell.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
New CN20K silicon has NIX hardware context structures different from
previous silicons. Add NIX send and completion queue context
definitions for cn20k. Extend NIX context handling support to cn20k.
Signed-off-by: Subbaraya Sundeep <sbhatta@marvell.com>
Link: https://patch.msgid.link/1761388367-16579-3-git-send-email-sbhatta@marvell.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Simplify NIX context reading and writing by using hardware
maximum context size instead of using individual sizes of
each context type.
Signed-off-by: Subbaraya Sundeep <sbhatta@marvell.com>
Link: https://patch.msgid.link/1761388367-16579-2-git-send-email-sbhatta@marvell.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Heiner Kallweit says:
====================
net: phy: add iterator mdiobus_for_each_phy
Add and use an iterator for all PHY's on a MII bus, and phy_find_next()
as a prerequisite.
====================
Link: https://patch.msgid.link/07fc63e8-53fd-46aa-853e-96187bba9d44@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Use new iterator mdiobus_for_each_phy() to simplify the code.
Reviewed-by: Siddharth Vadapalli <s-vadapalli@ti.com>
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Link: https://patch.msgid.link/326d1337-2c22-42e3-a152-046ac5c43095@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add an iterator for all PHY's on a MII bus, and phy_find_next()
as a prerequisite.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Reviewed-by: Wei Fang <wei.fang@nxp.com>
Link: https://patch.msgid.link/cd112f15-401a-43d9-8525-9ff0965a68cd@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
max_addr is the max number of addresses, not the highest possible address,
therefore check phydev->mdio.addr > max_addr isn't correct.
To fix this change the semantics of max_addr, so that it represents
the highest possible address. IMO this is also a little bit more intuitive
wrt name max_addr.
Fixes: 4a107a0e83 ("net: stmmac: mdio: use phy_find_first to simplify stmmac_mdio_register")
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Reported-by: Simon Horman <horms@kernel.org>
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/e869999b-2d4b-4dc1-9890-c2d3d1e8d0f8@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
pm_runtime_put_autosuspend(), pm_runtime_put_sync_autosuspend(),
pm_runtime_autosuspend() and pm_request_autosuspend() now include a call
to pm_runtime_mark_last_busy(). Remove the now-reduntant explicit call to
pm_runtime_mark_last_busy().
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Link: https://patch.msgid.link/20251027115022.390997-4-sakari.ailus@linux.intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
pm_runtime_put_autosuspend(), pm_runtime_put_sync_autosuspend(),
pm_runtime_autosuspend() and pm_request_autosuspend() now include a call
to pm_runtime_mark_last_busy(). Remove the now-reduntant explicit call to
pm_runtime_mark_last_busy().
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://patch.msgid.link/20251027115022.390997-2-sakari.ailus@linux.intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
pm_runtime_put_autosuspend(), pm_runtime_put_sync_autosuspend(),
pm_runtime_autosuspend() and pm_request_autosuspend() now include a call
to pm_runtime_mark_last_busy(). Remove the now-reduntant explicit call to
pm_runtime_mark_last_busy().
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Link: https://patch.msgid.link/20251027115022.390997-1-sakari.ailus@linux.intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Wei Fang says:
====================
net: enetc: Add i.MX94 ENETC support
i.MX94 NETC has two kinds of ENETCs, one is the same as i.MX95, which
can be used as a standalone network port. The other one is an internal
ENETC, it connects to the CPU port of NETC switch through the pseudo
MAC. Also, i.MX94 have multiple PTP Timers, which is different from
i.MX95. Any PTP Timer can be bound to a specified standalone ENETC by
the IERB ETBCR registers. Currently, this patch only add ENETC support
and Timer support for i.MX94. The switch will be added by a separate
patch set.
In addition, note that i.MX94 SoC is launched after i.MX95, its NETC
has a higher version, so the driver support is added after i.MX95.
====================
Link: https://patch.msgid.link/20251029013900.407583-1-wei.fang@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The revision of i.MX94 ENETC is changed to v4.3, so add this revision to
enetc_info to support i.MX94 ENETC. And add PTP suspport for i.MX94.
Signed-off-by: Wei Fang <wei.fang@nxp.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/20251029013900.407583-7-wei.fang@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The ENETC with pseudo MAC is an internal port which connects to the CPU
port of the switch. The switch CPU/host ENETC is fully integrated with
the switch and does not require a back-to-back MAC, instead a light
weight "pseudo MAC" provides the delineation between switch and ENETC.
This translates to lower power (less logic and memory) and lower delay
(as there is no serialization delay across this link).
Different from the standalone ENETC which is used as the external port,
the internal ENETC has a different PCIe device ID, and it does not have
Ethernet MAC port registers, instead, it has a small number of pseudo
MAC port registers, so some features are not supported by pseudo MAC,
such as loopback, half duplex, one-step timestamping and so on.
Therefore, the configuration of this internal ENETC is also somewhat
different from that of the standalone ENETC. So add the basic support
for ENETC with pseudo MAC. More supports will be added in the future.
Signed-off-by: Wei Fang <wei.fang@nxp.com>
Reviewed-by: Claudiu Manoil <claudiu.manoil@nxp.com>
Link: https://patch.msgid.link/20251029013900.407583-6-wei.fang@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The i.MX94 has three PTP timers, and all standalone ENETCs can select
one of them to bind to as their PHC. The 'ptp-timer' property is used
to represent the PTP device of the Ethernet controller. So users can
add 'ptp-timer' to the ENETC node to specify the PTP timer. The driver
parses this property to bind the two hardware devices.
If the "ptp-timer" property is not present, the first timer of the PCIe
bus where the ENETC is located is used as the default bound PTP timer.
Signed-off-by: Clark Wang <xiaoning.wang@nxp.com>
Signed-off-by: Wei Fang <wei.fang@nxp.com>
Link: https://patch.msgid.link/20251029013900.407583-5-wei.fang@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
NETC blocks control is used for warm reset and pre-boot initialization.
Different versions of NETC blocks control are not exactly the same. We
need to add corresponding netc_devinfo data for each version. i.MX94
series are launched after i.MX95, so its NETC version (v4.3) is higher
than i.MX95 NETC (v4.1). Currently, the patch adds the following
configurations for ENETCs.
1. Set the link's MII protocol.
2. ENETC 0 (MAC 3) and the switch port 2 (MAC 2) share the same parallel
interface, but due to SoC constraint, they cannot be used simultaneously.
Since the switch is not supported yet, so the interface is assigned to
ENETC 0 by default.
The switch configuration will be added separately in a subsequent patch.
Signed-off-by: Wei Fang <wei.fang@nxp.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/20251029013900.407583-4-wei.fang@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The ENETC with pseudo MAC is used to connect to the CPU port of the NETC
switch. This ENETC has a different PCI device ID, so add a standard PCI
device compatible string to it.
Signed-off-by: Wei Fang <wei.fang@nxp.com>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://patch.msgid.link/20251029013900.407583-3-wei.fang@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Ido Schimmel says:
====================
icmp: Add RFC 5837 support
tl;dr
=====
This patchset extends certain ICMP error messages (e.g., "Time
Exceeded") with incoming interface information in accordance with RFC
5837 [1]. This is required for more meaningful traceroute results in
unnumbered networks. Like other ICMP settings, the feature is controlled
via a per-{netns, address family} sysctl. The interface and the
implementation are designed to support more ICMP extensions.
Motivation
==========
Over the years, the kernel was extended with the ability to derive the
source IP of ICMP error messages from the interface that received the
datagram which elicited the ICMP error [2][3][4]. This is especially
important for "Time Exceeded" messages as it allows traceroute users to
trace the actual packet path along the network.
The above scheme does not work in unnumbered networks. In these
networks, only the loopback / VRF interface is assigned a global IP
address while router interfaces are assigned IPv6 link-local addresses.
As such, ICMP error messages are generated with a source IP derived from
the loopback / VRF interface, making it impossible to trace the actual
packet path when parallel links exist between routers.
The problem can be solved by implementing the solution proposed by RFC
4884 [5] and RFC 5837. The former defines an ICMP extension structure
that can be appended to selected ICMP messages and carry extension
objects. The latter defines an extension object called the "Interface
Information Object" (IIO) that can carry interface information (e.g.,
name, index, MTU) about interfaces with certain roles such as the
interface that received the datagram which elicited the ICMP error.
The payload of the datagram that elicited the error (potentially padded
/ trimmed) along with the ICMP extension structure will be queued to the
error queue of the originating socket, thereby allowing traceroute
applications to parse and display the information encoded in the ICMP
extension structure. Example:
# traceroute6 -e 2001:db8:1::3
traceroute to 2001:db8:1::3 (2001:db8:1::3), 30 hops max, 80 byte packets
1 2001:db8:1::2 (2001:db8:1::2) <INC:11,"eth1",mtu=1500> 0.214 ms 0.171 ms 0.162 ms
2 2001:db8:1::3 (2001:db8:1::3) <INC:12,"eth2",mtu=1500> 0.154 ms 0.135 ms 0.127 ms
# traceroute -e 192.0.2.3
traceroute to 192.0.2.3 (192.0.2.3), 30 hops max, 60 byte packets
1 192.0.2.2 (192.0.2.2) <INC:11,"eth1",mtu=1500> 0.191 ms 0.148 ms 0.144 ms
2 192.0.2.3 (192.0.2.3) <INC:12,"eth2",mtu=1500> 0.137 ms 0.122 ms 0.114 ms
Implementation
==============
As previously stated, the feature is controlled via a per-{netns,
address} sysctl. Specifically, a bit mask where each bit controls the
addition of a different ICMP extension to ICMP error messages.
Currently, only a single value is supported, to append the incoming
interface information.
Key points:
1. Global knob vs finer control. I am not aware of users who require
finer control, but it is possible that some users will want to avoid
appending ICMP extensions when the packet is sent out of a specific
interface (e.g., the management interface) or to a specific subnet. This
can be accomplished via a tc-bpf program that trims the ICMP extension
structure. An example program can be found here [6].
2. Split implementation between IPv4 / IPv6. While the implementation is
currently similar, there are some differences between both address
families. In addition, some extensions (e.g., RFC 8883 [7]) are
IPv6-specific. Given the above and given that the implementation is not
very complex, it makes sense to keep both implementations separate.
3. Compatibility with legacy applications. RFC 4884 from 2007 extended
certain ICMP messages with a length field that encodes the length of the
"original datagram" field, so that applications will be able to tell
where the "original datagram" ends and where the ICMP extension
structure starts.
Before the introduction of the IP{,6}_RECVERR_RFC4884 socket options
[8][9] in 2020 it was impossible for applications to know where the ICMP
extension structure starts and to this day some applications assume that
it starts at offset 128, which is the minimum length of the "original
datagram" field as specified by RFC 4884.
Therefore, in order to be compatible with both legacy and modern
applications, the datagram that elicited the ICMP error is trimmed /
padded to 128 bytes before appending the ICMP extension structure.
This behavior is specifically called out by RFC 4884: "Those wishing to
be backward compatible with non-compliant TRACEROUTE implementations
will include exactly 128 octets" [10].
Note that in 128 bytes we should be able to include enough headers for
the originating node to match the ICMP error message with the relevant
socket. For example, the following headers will be present in the
"original datagram" field when a VXLAN encapsulated IPv6 packet elicits
an ICMP error in an IPv6 underlay: IPv6 (40) | UDP (8) | VXLAN (8) | Eth
(14) | IPv6 (40) | UDP (8). Overall, 118 bytes.
If the 128 bytes limit proves to be insufficient for some use case, we
can consider dedicating a new bit in the previously mentioned sysctl to
allow for more bytes to be included in the "original datagram" field.
4. Extensibility. This patchset adds partial support for a single ICMP
extension. However, the interface and the implementation should be able
to support more extensions, if needed. Examples:
* More interface information objects as part of RFC 5837. We should be
able to derive the outgoing interface information and nexthop IP from
the dst entry attached to the packet that elicited the error.
* Node identification object (e.g., hostname / loopback IP) [11].
* Extended Information object which encodes aggregate header limits as
part of RFC 8883.
A previous proposal from Ishaan Gandhi and Ron Bonica is available here
[12].
Testing
=======
The existing traceroute selftest is extended to test that ICMP
extensions are reported correctly when enabled. Both address families
are tested and with different packet sizes in order to make sure that
trimming / padding works correctly. Tested that packets are parsed
correctly by the IP{,6}_RECVERR_RFC4884 socket options using Willem's
selftest [13].
Changelog
=========
Changes since v1 [14]:
* Patches #1-#2: Added a comment about field ordering and review tags.
* Patch #3: Converted "sysctl" to "echo" when testing the return value.
Added a check to skip the test if traceroute version is older
than 2.1.5.
[1] https://datatracker.ietf.org/doc/html/rfc5837
[2] https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=1c2fb7f93cb20621772bf304f3dba0849942e5db
[3] https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=fac6fce9bdb59837bb89930c3a92f5e0d1482f0b
[4] https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=4a8c416602d97a4e2073ed563d4d4c7627de19cf
[5] https://datatracker.ietf.org/doc/html/rfc4884
[6] https://gist.github.com/idosch/5013448cdb5e9e060e6bfdc8b433577c
[7] https://datatracker.ietf.org/doc/html/rfc8883
[8] https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=eba75c587e811d3249c8bd50d22bb2266ccd3c0f
[9] https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=01370434df85eb76ecb1527a4466013c4aca2436
[10] https://datatracker.ietf.org/doc/html/rfc4884#section-5.3
[11] https://datatracker.ietf.org/doc/html/draft-ietf-intarea-extended-icmp-nodeid-04
[12] https://lore.kernel.org/netdev/20210317221959.4410-1-ishaangandhi@gmail.com/
[13] https://lore.kernel.org/netdev/aPpMItF35gwpgzZx@shredder/
[14] https://lore.kernel.org/netdev/20251022065349.434123-1-idosch@nvidia.com/
====================
Link: https://patch.msgid.link/20251027082232.232571-1-idosch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Test that ICMP extensions are reported correctly when enabled and not
reported when disabled. Test both IPv4 and IPv6 and using different
packet sizes, to make sure trimming / padding works correctly.
Disable ICMP rate limiting (defaults to 1 per-second per-target) so that
the kernel will always generate ICMP errors when needed.
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Link: https://patch.msgid.link/20251027082232.232571-4-idosch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add the ability to append the incoming IP interface information to
ICMPv6 error messages in accordance with RFC 5837 and RFC 4884. This is
required for more meaningful traceroute results in unnumbered networks.
The feature is disabled by default and controlled via a new sysctl
("net.ipv6.icmp.errors_extension_mask") which accepts a bitmask of ICMP
extensions to append to ICMP error messages. Currently, only a single
value is supported, but the interface and the implementation should be
able to support more extensions, if needed.
Clone the skb and copy the relevant data portions before modifying the
skb as the caller of icmp6_send() still owns the skb after the function
returns. This should be fine since by default ICMP error messages are
rate limited to 1000 per second and no more than 1 per second per
specific host.
Trim or pad the packet to 128 bytes before appending the ICMP extension
structure in order to be compatible with legacy applications that assume
that the ICMP extension structure always starts at this offset (the
minimum length specified by RFC 4884).
Since commit 20e1954fe2 ("ipv6: RFC 4884 partial support for SIT/GRE
tunnels") it is possible for icmp6_send() to be called with an skb that
already contains ICMP extensions. This can happen when we receive an
ICMPv4 message with extensions from a tunnel and translate it to an
ICMPv6 message towards an IPv6 host in the overlay network. I could not
find an RFC that supports this behavior, but it makes sense to not
overwrite the original extensions that were appended to the packet.
Therefore, avoid appending extensions if the length field in the
provided ICMPv6 header is already filled.
Export netdev_copy_name() using EXPORT_IPV6_MOD_GPL() to make it
available to IPv6 when it is built as a module.
Reviewed-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20251027082232.232571-3-idosch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add the ability to append the incoming IP interface information to
ICMPv4 error messages in accordance with RFC 5837 and RFC 4884. This is
required for more meaningful traceroute results in unnumbered networks.
The feature is disabled by default and controlled via a new sysctl
("net.ipv4.icmp_errors_extension_mask") which accepts a bitmask of ICMP
extensions to append to ICMP error messages. Currently, only a single
value is supported, but the interface and the implementation should be
able to support more extensions, if needed.
Clone the skb and copy the relevant data portions before modifying the
skb as the caller of __icmp_send() still owns the skb after the function
returns. This should be fine since by default ICMP error messages are
rate limited to 1000 per second and no more than 1 per second per
specific host.
Trim or pad the packet to 128 bytes before appending the ICMP extension
structure in order to be compatible with legacy applications that assume
that the ICMP extension structure always starts at this offset (the
minimum length specified by RFC 4884).
Reviewed-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20251027082232.232571-2-idosch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Socket APIs like recvfrom(), accept(), and getsockname() expect socklen_t*
arg, but tests were using int variables. This causes -Wpointer-sign
warnings on platforms where socklen_t is unsigned.
Change the variable type from int to socklen_t to resolve the warning and
ensure type safety across platforms.
warning fixed:
sctp_collision.c:62:70: warning: passing 'int *' to parameter of
type 'socklen_t *' (aka 'unsigned int *') converts between pointers to
integer types with different sign [-Wpointer-sign]
62 | ret = recvfrom(sd, buf, sizeof(buf),
0, (struct sockaddr *)&daddr, &len);
| ^~~~
/usr/include/sys/socket.h:165:27: note: passing argument to
parameter '__addr_len' here
165 | socklen_t *__restrict __addr_len);
| ^
Reviewed-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Signed-off-by: Ankit Khushwaha <ankitkhushwaha.linux@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20251028172947.53153-1-ankitkhushwaha.linux@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Russell King says:
====================
net: stmmac: hwif.c cleanups
This series cleans up hwif.c:
- move the reading of the version information out of stmmac_hwif_init()
into its own function, stmmac_get_version(), storing the result in a
new struct.
- simplify stmmac_get_version().
- read the version register once, passing it to stmmac_get_id() and
stmmac_get_dev_id().
- move stmmac_get_id() and stmmac_get_dev_id() into
stmmac_get_version()
- define version register fields and use FIELD_GET() to decode
- start tackling the big loop in stmmac_hwif_init() - provide a
function, stmmac_hwif_find(), which looks up the hwif entry, thus
making a much smaller loop, which improves readability of this code.
- change the use of '^' to '!=' when comparing the dev_id, which is
what is really meant here.
- reorganise the test after calling stmmac_hwif_init() so that we
handle the error case in the indented code, and the success case
with no indent, which is the classical arrangement.
====================
Link: https://patch.msgid.link/aQFZVSGJuv8-_DIo@shell.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reorganise stmmac_hwif_init() to handle the error case of
stmmac_hwif_find() in the indented block, which follows normal
programming pattern.
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Tested-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Tested-by: Mohd Ayaan Anwar <mohd.anwar@oss.qualcomm.com>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/E1vDtfG-0000000CCCX-2YwQ@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Use the more usual not-equals rather than exclusive-or operator when
comparing the dev_id in stmmac_hwif_find().
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Tested-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Tested-by: Mohd Ayaan Anwar <mohd.anwar@oss.qualcomm.com>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/E1vDtfB-0000000CCCR-25rr@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Provide a function to lookup the hwif entry given the core type,
Synopsys version, and device ID (used for XGMAC cores).
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Tested-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Tested-by: Mohd Ayaan Anwar <mohd.anwar@oss.qualcomm.com>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/E1vDtf6-0000000CCCL-1cQA@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Provide field definitions in common.h, and use these with FIELD_GET()
to extract the fields from the version register.
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Tested-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Tested-by: Mohd Ayaan Anwar <mohd.anwar@oss.qualcomm.com>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/E1vDtf1-0000000CCCF-0uUV@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Move the contents of both stmmac_get_id() and stmmac_get_dev_id() into
stmmac_get_version() as it no longer makes sense for these to be
separate functions.
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Tested-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Tested-by: Mohd Ayaan Anwar <mohd.anwar@oss.qualcomm.com>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/E1vDtew-0000000CCC9-0KeM@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
There is no need to read the version register twice, once in
stmmac_get_id() and then again in stmmac_get_dev_id(). Consolidate
this into stmmac_get_version() and pass each of these this value.
As both functions unnecessarily issue the same warning for a zero
register value, also move this into stmmac_get_version().
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Tested-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Tested-by: Mohd Ayaan Anwar <mohd.anwar@oss.qualcomm.com>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/E1vDteq-0000000CCC3-3zbJ@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
We can simplify stmmac_get_version() by pre-initialising the version
members to zero, detecting the MAC100 core and returning, otherwise
determining the version register offset separately from calling
stmmac_get_id() and stmmac_get_dev_id(). Do this.
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Tested-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Tested-by: Mohd Ayaan Anwar <mohd.anwar@oss.qualcomm.com>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/E1vDtel-0000000CCBx-3Lpf@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Move the version handling out of stmmac_hwif_init() and into its own
function, returning the version information through a structure.
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Tested-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Tested-by: Mohd Ayaan Anwar <mohd.anwar@oss.qualcomm.com>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/E1vDteg-0000000CCBr-2m7q@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Function udp_v4_early_demux() was already declared in 'include/net/udp.h',
no need to keep the extern in 'ip_input.c', which may produce the
following checkpatch warning:
WARNING: externs should be avoided in .c files
#45: FILE: net/ipv4/ip_input.c:322:
+enum skb_drop_reason udp_v4_early_demux(struct sk_buff *skb);
Replace it by including 'net/udp.h'. Do the same for tcp_v4_early_demux().
Signed-off-by: Wang Liang <wangliang74@huawei.com>
Link: https://patch.msgid.link/20251025092637.1020960-1-wangliang74@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The LED registers on YT8531 are exactly same as YT8521, so simply
reuse yt8521_led_hw_* functions.
Tested on OrangePi R1 Plus LTS and Zero3.
Signed-off-by: Tianling Shen <cnsztl@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Jijie Shao<shaojijie@huawei.com>
Link: https://patch.msgid.link/20251026133652.1288732-1-cnsztl@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The RTL8224 can detect open pairs and short types (in same pair or some
other pair). The distance to this problem can be estimated. This is done
for each of the 4 pairs separately.
It is not meant to be run while there is an active link partner because
this interferes with the active test pulses.
Output with open 50 m cable:
Pair A code Open Circuit, source: TDR
Pair A, fault length: 51.79m, source: TDR
Pair B code Open Circuit, source: TDR
Pair B, fault length: 51.28m, source: TDR
Pair C code Open Circuit, source: TDR
Pair C, fault length: 50.46m, source: TDR
Pair D code Open Circuit, source: TDR
Pair D, fault length: 51.12m, source: TDR
Terminated cable:
Pair A code OK, source: TDR
Pair B code OK, source: TDR
Pair C code OK, source: TDR
Pair D code OK, source: TDR
Shorted cable (both short types are at roughly the same distance)
Pair A code Short to another pair, source: TDR
Pair A, fault length: 2.35m, source: TDR
Pair B code Short to another pair, source: TDR
Pair B, fault length: 2.15m, source: TDR
Pair C code OK, source: TDR
Pair D code Short within Pair, source: TDR
Pair D, fault length: 1.94m, source: TDR
Signed-off-by: Issam Hamdi <ih@simonwunderlich.de>
Co-developed-by: Sven Eckelmann <se@simonwunderlich.de>
Signed-off-by: Sven Eckelmann <se@simonwunderlich.de>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20251024-rtl8224-cable-test-v1-1-e3cda89ac98f@simonwunderlich.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Tony Nguyen says:
====================
ice: postpone service task disabling
Przemek Kitszel says:
Move service task shutdown to the very end of driver teardown procedure.
This is needed (or at least beneficial) for all unwinding functions that
talk to FW/HW via Admin Queue (so, most of top-level functions, like
ice_deinit_hw()).
Most of the patches move stuff around (I believe it makes it much easier
to review/proof when kept separate) in preparation to defer stopping the
service task to the very end of ice_remove() (and other unwinding flows).
Then last patch fixes duplicate call to ice_init_hw() (actual, but
unlikely to encounter, so -next, given the size of the changes).
First patch is not much related, only by that it was developed together
* '100GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue:
ice: remove duplicate call to ice_deinit_hw() on error paths
ice: move ice_deinit_dev() to the end of deinit paths
ice: extract ice_init_dev() from ice_init()
ice: move ice_init_pf() out of ice_init_dev()
ice: move udp_tunnel_nic and misc IRQ setup into ice_init_pf()
ice: ice_init_pf: destroy mutexes and xarrays on memory alloc failure
ice: move ice_init_interrupt_scheme() prior ice_init_pf()
ice: move service task start out of ice_init_pf()
ice: enforce RTNL assumption of queue NAPI manipulation
====================
Link: https://patch.msgid.link/20251024204746.3092277-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Fix kernel-doc warnings in tcp_lp.c by adding missing parameter
descriptions for tcp_lp_cong_avoid() and tcp_lp_pkts_acked() when
building with W=1.
Also replace invalid URLs in the file header comment with the currently
valid links to the TCP-LP paper and implementation page.
No functional changes.
Signed-off-by: Rakuram Eswaran <rakuram.e96@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20251025-net_ipv4_tcp_lp_c-v1-1-058cc221499e@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
'struct sctp_sched_ops' is not modified in these drivers.
Constifying this structure moves some data to a read-only section, so
increases overall security, especially when the structure holds some
function pointers.
On a x86_64, with allmodconfig, as an example:
Before:
======
text data bss dec hex filename
8019 568 0 8587 218b net/sctp/stream_sched_fc.o
After:
=====
text data bss dec hex filename
8275 312 0 8587 218b net/sctp/stream_sched_fc.o
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Link: https://patch.msgid.link/dce03527eb7b7cc8a3c26d5cdac12bafe3350135.1761377890.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
