__intel_dmc_wl_release() schedules delayed work which releases the DMC
wakelock after a fixed timeout of 50 ms. Until the delayed work runs,
the wakelock remains held and prevents entry into deeper DC states.
Reduce DMC_WAKELOCK_HOLD_TIME from 50 ms to 5 ms.
This should allow the system to enter deeper DC states sooner once MMIO
activity settles down.
Changes in v2:
- Drop detailed explanation from commit message
and keep it concise (Suraj Kandpal, Luca Coelho)
Signed-off-by: Dibin Moolakadan Subrahmanian <dibin.moolakadan.subrahmanian@intel.com>
Reviewed-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Suraj Kandpal <suraj.kandpal@intel.com>
Link: https://patch.msgid.link/20260407105102.3730973-1-dibin.moolakadan.subrahmanian@intel.com
intel_dp_mode_min_link_bpp_x16() gives us the min bpp for the
DP link before the PCON, however intel_dp_mode_valid_downstream()
is trying to check for sufficient bandwidth on the HDMI FRL link
after the PCON. So the use of intel_dp_mode_min_link_bpp_x16() here
is incorrect.
Presumably even with FRL HDMI still can't go below 8bpc, so we should
just use that to give us the minimum required FRL bandwidth. And this
needs to account for the sink format (for 4:2:0 sub-sampling) since
that is what will be flowing over the HDMI link.
Cc: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Cc: Nicolas Frattaroli <nicolas.frattaroli@collabora.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patch.msgid.link/20260407183015.16256-1-ville.syrjala@linux.intel.com
Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Reviewed-by: Nicolas Frattaroli <nicolas.frattaroli@collabora.com>
The sharpness filter is just a special mode of the pipe scaler.
It doesn't warrant all this special casing everywhere. Just
integrate it properly into the scaler code so that it's treated
no different from the other pipe scaler uses (scaling,centering,
YCbCr 4:2:0 output).
v2: Also reject scaling_filter vs. sharpness
Reviewed-by: Nemesa Garg <nemesa.garg@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patch.msgid.link/20260407175244.19654-10-ville.syrjala@linux.intel.com
We now have three different reasons for calling
intel_pfit_compute_config():
- actual pfit scaling/centering
- YCbCr 4:2:0 output
- sharpness filter
So let's just call intel_pfit_compute_config() unconditionally
from both the DP and HDMI code. Both gmch and ilk+ pfit code
should be capable of judging whether anything actually
needs the pfit.
The only slightly questionable thing in the gmch code is
the dithering knob, but that's only a thing on gen2/3 which
don't even have HDMI/DP outputs, and so not an issue here.
Reviewed-by: Michał Grzelak <michal.grzelak@intel.com>
Reviewed-by: Nemesa Garg <nemesa.garg@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patch.msgid.link/20260407175244.19654-9-ville.syrjala@linux.intel.com
intel_casf_filter_lut_load() can find the crtc from the crtc_state.
No need to pass in both.
Reviewed-by: Michał Grzelak <michal.grzelak@intel.com>
Reviewed-by: Nemesa Garg <nemesa.garg@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patch.msgid.link/20260407175244.19654-8-ville.syrjala@linux.intel.com
Make the crtc_state const everywhere in the sharpness filter
code where it doesn't need to be mutated.
Reviewed-by: Michał Grzelak <michal.grzelak@intel.com>
Reviewed-by: Nemesa Garg <nemesa.garg@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patch.msgid.link/20260407175244.19654-7-ville.syrjala@linux.intel.com
Nuke the duplicate CASF_SCALER_FILTER_SELECT and just have
skl_scaler_get_filter_select() return the proper value for
sharpness filter use. It is the same "use programmable coefficients"
value we already use for the nearest neighbor filtering.
Reviewed-by: Michał Grzelak <michal.grzelak@intel.com>
Reviewed-by: Nemesa Garg <nemesa.garg@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patch.msgid.link/20260407175244.19654-6-ville.syrjala@linux.intel.com
Extract a small helper to determine if the scaler supports
the sharpness filter or not.
Reviewed-by: Michał Grzelak <michal.grzelak@intel.com>
Reviewed-by: Nemesa Garg <nemesa.garg@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patch.msgid.link/20260407175244.19654-5-ville.syrjala@linux.intel.com
The casf state is placed inside the 'hw' state for some reason.
That is only really meant for things we have to duplicate from
the uapi state. The rest can live on its own in our actual state.
And since casf is just one aspect of the pfit/pipe scaler the
proper place for it seems to be under pch_pfit.
Reviewed-by: Michał Grzelak <michal.grzelak@intel.com>
Reviewed-by: Nemesa Garg <nemesa.garg@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patch.msgid.link/20260407175244.19654-4-ville.syrjala@linux.intel.com
Make a copy of the uapi.sharpness_strength property value in our hw
state. This is how we deal with having proper state for joined pipes.
Reviewed-by: Michał Grzelak <michal.grzelak@intel.com>
Reviewed-by: Nemesa Garg <nemesa.garg@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patch.msgid.link/20260407175244.19654-3-ville.syrjala@linux.intel.com
The 'casf_enable' boolean is already inside a casf specific
structure, so drop the extra 'casf_' namespace from the bool.
Reviewed-by: Michał Grzelak <michal.grzelak@intel.com>
Reviewed-by: Nemesa Garg <nemesa.garg@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patch.msgid.link/20260407175244.19654-2-ville.syrjala@linux.intel.com
Since the PCI registers are used from both i915 display and core, move
intel_pci_config.h to include/drm/intel/pci_config.h. Drop the intel_
prefix from the name to reduce tautology.
With this, we can drop the corresponding xe display compat header.
v2: Rebase
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patch.msgid.link/5aac6c711c3f0a09fc52f322455a4a4b35f80a82.1775590536.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Since the mchbar registers are used from both i915 display and core,
move intel_mchbar_regs.h to include/drm/intel/mchbar_regs.h. Drop the
intel_ prefix from the name to reduce tautology.
With this, we can drop the corresponding xe display compat header.
v2: Rebase
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patch.msgid.link/6c951b2c05db74ea517d52a3912986f7eb886422.1775590536.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
As an exception to the rule of not including unnecessary headers from
headers, include intel_mchbar_regs.h from intel_mchbar.h. In order to
use the interfaces in intel_mchbar.h you will always have to include the
registers anyway, so the includes are in pairs everywhere. There is zero
asymmetry. Simplify.
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patch.msgid.link/e44dc2daf3fc39d02c3f598c323caa3c08a54304.1775590536.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
VESA backlight enable is possible when
BACKLIGHT_AUX_ENABLE_CAPABLE is true via AUX command or when
BACKLIGHT_PIN_ENABLE_CAPABLE is true via eDP connector pin.
Similarly, backlight brightness adjustment can be
done via AUX-based control or PWM pin-based control.
It means there can be three configurations:
1) Full AUX-based: Enable and adjustment both via AUX. We currently
support this (apart from the AUX luminance-based backlight control).
2) Hybrid: Enable via the BL_ENABLE pin, adjustment via either AUX or
PWM.
3) Fully PWM pin-based: Enable via the BL_ENABLE pin, adjustment via
PWM.
Since that only 1 is supported as of now we need to make
sure we do not try to manipulate backlight when
BACKLIGHT_AUX_ENABLE_CAPABLE is not set.
Also fix return value when condition is not fulfilled.
Closes: https://gitlab.freedesktop.org/drm/i915/kernel/-/work_items/15907
Fixes: 0fb03890d1 ("drm/i915/backlight: Check if VESA backlight is possible")
Signed-off-by: Suraj Kandpal <suraj.kandpal@intel.com>
Tested-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Link: https://patch.msgid.link/20260407030710.1440046-1-suraj.kandpal@intel.com
This gets the memory sizes from the nodes and stores the limit
as 50% of those. I think eventually we should drop the limits
once we have memcg aware shrinking, but this should be more NUMA
friendly, and I think seems like what people would prefer to
happen on NUMA aware systems.
Cc: Christian Koenig <christian.koenig@amd.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
This enable NUMA awareness for the shrinker on the
ttm pools.
Cc: Christian Koenig <christian.koenig@amd.com>
Cc: Dave Chinner <david@fromorbit.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
The list_lru will now handle numa for us, so no need to keep
separate pool types for it. Just consolidate into the global ones.
This adds a debugfs change to avoid dumping non-existant orders due
to this change.
Cc: Christian Koenig <christian.koenig@amd.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Signed-off-by: Dave Airlie <airlied@redhat.com>
This is an initial port of the TTM pools for
write combined and uncached pages to use the list_lru.
This makes the pool's more NUMA aware and avoids
needing separate NUMA pools (later commit enables this).
Cc: Christian Koenig <christian.koenig@amd.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Dave Chinner <david@fromorbit.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
This uses the newly introduced per-node gpu tracking stats,
to track GPU memory allocated via TTM and reclaimable memory in
the TTM page pools.
These stats will be useful later for system information and
later when mem cgroups are integrated.
Cc: Christian Koenig <christian.koenig@amd.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: linux-mm@kvack.org
Cc: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
While discussing memcg intergration with gpu memory allocations,
it was pointed out that there was no numa/system counters for
GPU memory allocations.
With more integrated memory GPU server systems turning up, and
more requirements for memory tracking it seems we should start
closing the gap.
Add two counters to track GPU per-node system memory allocations.
The first is currently allocated to GPU objects, and the second
is for memory that is stored in GPU page pools that can be reclaimed,
by the shrinker.
Cc: Christian Koenig <christian.koenig@amd.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: linux-mm@kvack.org
Cc: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Zi Yan <ziy@nvidia.com>
Acked-by: Shakeel Butt <shakeel.butt@linux.dev>
Acked-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
When the pipe_src width or height are greater than adjusted_mode hdisplay
and vdisplay, computed x and y offsets for center mode can be negative.
Writing negative values into the pch_fit registers result in a state error.
Add a check to clamp these values so that they are never negative.
v2: Compare in terms of pipe_src width and height.[Ville]
v3: Change width/height to pipe_src_w/h in logging. [Ville]
Signed-off-by: Nemesa Garg <nemesa.garg@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patch.msgid.link/20260402061310.111073-1-nemesa.garg@intel.com
-----BEGIN PGP SIGNATURE-----
iQFSBAABCgA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAmnS4Y8eHHRvcnZhbGRz
QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiGe6AIAI4rjLLPlxUKQbx4
JP9lsKH7vqeIVvuMqzFau7+B8ngJ+80OESnBF7n43oNEqdJ0NYiL+rPtcGgBjZDP
yUu5DlzVSxpAIQBZe2Nc0dz/5NbT9QxKyC5Yl/whpNIR7UHx1RFvDJYxwN9xKxTw
ggLQevKAnHrKjIOKjq70Yqz2T1JMXc9Wp/xpur0oGioiFW/lH24CgHDXjE2Ka9oD
wqhotzThuSaaVDmqZ8WNFKxx2onR4r8/NpljaVT2mWRJ2+IMF4pMOBJZRQiNZtRa
1CsoJ3aV6pslAsuC1dLboCMul48VUgyu7l3xQwXVuA5bRO1jqt5ILWC10g09OItU
7CxGTno=
=1TRg
-----END PGP SIGNATURE-----
Merge v7.0-rc7 into drm-next
Thomas Zimmermann needs 2f42c1a616 ("drm/ast: dp501: Fix
initialization of SCU2C") for drm-misc-next.
Conflicts:
- drivers/gpu/drm/amd/display/dc/hwss/dcn401/dcn401_hwseq.c
Just between e927b36ae1 ("drm/amd/display: Fix NULL pointer
dereference in dcn401_init_hw()") and it's cherry-pick that confused
git.
- drivers/gpu/drm/amd/pm/swsmu/smu11/smu_v11_0.c
Deleted in 6b0a611628 ("drm/amd/pm: Unify version check in SMUv11")
but some cherry-picks confused git. Same for v12/v14.
Signed-off-by: Simona Vetter <simona.vetter@ffwll.ch>
Unused bandwidth can be used by external display agents for Panel Replay
enabled DP panel during idleness with link on. Enable source to replace
dummy data from the display with data from another agent by programming
TRANS_DP2_CTL [Panel Replay Tunneling Enable].
v2:
- Enable pr bw optimization along with panel replay enable. [Jani]
v3:
- Write TRANS_DP2_CTL once for both bw optimization and panel replay
enable. [Jani]
v4:
- Read DPCD once in init() and store in panel_replay_caps. [Jouni]
v5:
- Avoid reading DPCD for edp. [Jouni]
- Use drm_dp_dpcd_read_byte() and some cosmetic changes. [Jani]
v6:
- Extend the corresponding interface defined in drm_dp_tunnel.c
to query the Panel Replay optimization capability. [Imre]
v7:
- Clear TRANS_DP2_PR_TUNNELING_ENABLE if pr bw optimization
is not allowed. [Jouni]
- Move intel_dp_is_edp() check. [Jouni]
Bspec: 68920
Reviewed-by: Arun R Murthy <arun.r.murthy@intel.com>
Reviewed-by: Jouni Högander <jouni.hogander@intel.com>
Signed-off-by: Animesh Manna <animesh.manna@intel.com>
Link: https://patch.msgid.link/20260330133620.3750559-4-animesh.manna@intel.com
Add a hook that uses the drm core tunneling function to check
whether panel replay bandwidth optimization support is present.
v2: Move DISPLAY_VER() check to
intel_dp_tunnel_pr_optimization_supported(). [Jouni]
Reviewed-by: Jouni Högander <jouni.hogander@intel.com>
Signed-off-by: Animesh Manna <animesh.manna@intel.com>
Link: https://patch.msgid.link/20260330133620.3750559-3-animesh.manna@intel.com
Add api to check panel replay optimization supported or not to
drm-core DP tunneling framework which can be used by other driver
as well.
v2: Split generic drm changes from Intel specific changes. [Jouni]
Reviewed-by: Jouni Högander <jouni.hogander@intel.com>
Suggested-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Animesh Manna <animesh.manna@intel.com>
Acked-by: Maarten Lankhorst <dev@lankhorst.se>
Link: https://patch.msgid.link/20260330133620.3750559-2-animesh.manna@intel.com
- Fix a CONFIG_SPARSEMEM crash on RV32 by avoiding early phys_to_page()
- Prevent runtime const infrastructure from being used by modules, similar
to what was done for x86
- Avoid problems when shutting down ACPI systems with IOMMUs by adding
a device dependency between IOMMU and devices that use it
- Fix a bug where the CPU pointer masking state isn't properly reset
when tagged addresses aren't enabled for a task
- Fix some incorrect register assignments, and add some missing ones,
in kgdb support code
- Fix compilation of non-kernel code that uses the ptrace uapi header
by replacing BIT() with _BITUL()
- Fix compilation of the validate_v_ptrace kselftest by working around
kselftest macro expansion issues
-----BEGIN PGP SIGNATURE-----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=d0PH
-----END PGP SIGNATURE-----
Merge tag 'riscv-for-linus-7.0-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull RISC-V fixes from Paul Walmsley:
- Fix a CONFIG_SPARSEMEM crash on RV32 by avoiding early phys_to_page()
- Prevent runtime const infrastructure from being used by modules,
similar to what was done for x86
- Avoid problems when shutting down ACPI systems with IOMMUs by adding
a device dependency between IOMMU and devices that use it
- Fix a bug where the CPU pointer masking state isn't properly reset
when tagged addresses aren't enabled for a task
- Fix some incorrect register assignments, and add some missing ones,
in kgdb support code
- Fix compilation of non-kernel code that uses the ptrace uapi header
by replacing BIT() with _BITUL()
- Fix compilation of the validate_v_ptrace kselftest by working around
kselftest macro expansion issues
* tag 'riscv-for-linus-7.0-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
ACPI: RIMT: Add dependency between iommu and devices
selftests: riscv: Add braces around EXPECT_EQ()
riscv: use _BITUL macro rather than BIT() in ptrace uapi and kselftests
riscv: Reset pmm when PR_TAGGED_ADDR_ENABLE is not set
riscv: make runtime const not usable by modules
riscv: patch: Avoid early phys_to_page()
riscv: kgdb: fix several debug register assignment bugs
In eb_lookup_vma(), the code checks that the context vm matches before
incrementing the i915 vma usage count, but for the non-matching case it
didn't clear the non-matching vma pointer, so it would then mistakenly
be returned, causing potential UaF and refcount issues.
Reported-by: Yassine Mounir <sosohero200@gmail.com>
Suggested-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Fix allocation in TLB uniquification
Fix SiByte cache initialisation
Check uart parameters from firmware on Loongson64 systems
Fix clock id mismatch for Ralink SoCs
Fix GCC version check for __mutli3 workaround
-----BEGIN PGP SIGNATURE-----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=1q4p
-----END PGP SIGNATURE-----
Merge tag 'mips-fixes_7.0_1' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux
Pull MIPS fixes from Thomas Bogendoerfer:
- Fix TLB uniquification for systems with TLB not initialised by
firmware
- Fix allocation in TLB uniquification
- Fix SiByte cache initialisation
- Check uart parameters from firmware on Loongson64 systems
- Fix clock id mismatch for Ralink SoCs
- Fix GCC version check for __mutli3 workaround
* tag 'mips-fixes_7.0_1' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux:
mips: mm: Allocate tlb_vpn array atomically
MIPS: mm: Rewrite TLB uniquification for the hidden bit feature
MIPS: mm: Suppress TLB uniquification on EHINV hardware
MIPS: Always record SEGBITS in cpu_data.vmbits
MIPS: Fix the GCC version check for `__multi3' workaround
MIPS: SiByte: Bring back cache initialisation
mips: ralink: update CPU clock index
MIPS: Loongson64: env: Check UARTs passed by LEFI cautiously
Here are a relativly large number of small char/misc/iio and other
driver fixes for 7.0-rc7. There's a bunch, but overall they are all
small fixes for issues that people have been having that I finally
caught up with getting merged due to delays on my end.
The "largest" change overall is just some documentation updates to the
security-bugs.rst file to hopefully tell the AI tools (and any users
that actually read the documentation), how to send us better security
bug reports as the quantity of reports these past few weeks has
increased dramatically due to tools getting better at "finding" things.
Included in here are:
- lots of small IIO driver fixes for issues reported in 7.0-rc
- gpib driver fixes
- comedi driver fixes
- interconnect driver fix
- nvmem driver fixes
- mei driver fix
- counter driver fix
- binder rust driver fixes
- some other small misc driver fixes
All of these have been in linux-next this week with no reported issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCadIaEg8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ym34ACfTtx3DzFMxNmE2eQrvptvqmSeVEoAoIt9h9kF
pVDpO6Njqetq0zzWfBL3
=uv/h
-----END PGP SIGNATURE-----
Merge tag 'char-misc-7.0-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc/iio driver fixes from Greg KH:
"Here are a relativly large number of small char/misc/iio and other
driver fixes for 7.0-rc7. There's a bunch, but overall they are all
small fixes for issues that people have been having that I finally
caught up with getting merged due to delays on my end.
The "largest" change overall is just some documentation updates to the
security-bugs.rst file to hopefully tell the AI tools (and any users
that actually read the documentation), how to send us better security
bug reports as the quantity of reports these past few weeks has
increased dramatically due to tools getting better at "finding"
things.
Included in here are:
- lots of small IIO driver fixes for issues reported in 7.0-rc
- gpib driver fixes
- comedi driver fixes
- interconnect driver fix
- nvmem driver fixes
- mei driver fix
- counter driver fix
- binder rust driver fixes
- some other small misc driver fixes
All of these have been in linux-next this week with no reported issues"
* tag 'char-misc-7.0-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (63 commits)
Documentation: fix two typos in latest update to the security report howto
Documentation: clarify the mandatory and desirable info for security reports
Documentation: explain how to find maintainers addresses for security reports
Documentation: minor updates to the security contacts
.get_maintainer.ignore: add myself
nvmem: zynqmp_nvmem: Fix buffer size in DMA and memcpy
nvmem: imx: assign nvmem_cell_info::raw_len
misc: fastrpc: check qcom_scm_assign_mem() return in rpmsg_probe
misc: fastrpc: possible double-free of cctx->remote_heap
comedi: dt2815: add hardware detection to prevent crash
comedi: runflags cannot determine whether to reclaim chanlist
comedi: Reinit dev->spinlock between attachments to low-level drivers
comedi: me_daq: Fix potential overrun of firmware buffer
comedi: me4000: Fix potential overrun of firmware buffer
comedi: ni_atmio16d: Fix invalid clean-up after failed attach
gpib: fix use-after-free in IO ioctl handlers
gpib: lpvo_usb: fix memory leak on disconnect
gpib: Fix fluke driver s390 compile issue
lis3lv02d: Omit IRQF_ONESHOT if no threaded handler is provided
lis3lv02d: fix kernel-doc warnings
...
Here are 2 small tty vt fixes for 7.0-rc7 to resolve some reported
issues with the resize ability of the alt screen buffer. Both of these
have been in linux-next all week with no reported issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCadIatA8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ylqVQCfecM0mxjbI8EmKsfL6FtpAstcW1IAn2XwT7S0
ITAhHAylAuh3HHpXqRfi
=eulV
-----END PGP SIGNATURE-----
Merge tag 'tty-7.0-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Pull tty fixes from Greg KH:
"Here are two small tty vt fixes for 7.0-rc7 to resolve some reported
issues with the resize ability of the alt screen buffer. Both of these
have been in linux-next all week with no reported issues"
* tag 'tty-7.0-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
vt: resize saved unicode buffer on alt screen exit after resize
vt: discard stale unicode buffer on alt screen exit after resize
Here are a bunch of USB and Thunderbolt fixes (most all are USB) for
7.0-rc7. More than I normally like this late in the release cycle,
partly due to my recent travels, and partly due to people banging away
on the USB gadget interfaces and apis more than normal (big shoutout to
Android for getting the vendors to actually work upstream on this,
that's a huge win overall for everyone here.)
Included in here are:
- Small thunderbolt fix
- new USB serial driver ids added
- typec driver fixes
- gadget driver fixes for some disconnect issues
- other usb gadget driver fixes for reported problems with binding and
unbinding devices as happens when a gadget device connects /
disconnects from a system it is plugged into (or it switches device
mode at a user's request, these things are complex little beasts...)
- usb offload fixes (where USB audio tunnels through the controller
while the main CPU is asleep) for when EMP spikes hit the system
causing disconnects to happen (as often happens with static
electricity in the winter months). This has been much reported by
at least one vendor, and resolves the issues they have been seeing
with this codepath. Can't wait for the "formal methods are the
answer!" people to try to model that one properly...
- Other small usb driver fixes for issues reported.
All of these have been in linux-next this week, and before, with no
reported issues, and I've personally been stressing these harder than
normal on my systems here with no problems.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCadIdow8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ylTVQCfYg21ERvg753HnW1zbnzjMFlJZTQAoL+/0zeH
VcNijzt/8uiEKvQWAhcB
=BcZf
-----END PGP SIGNATURE-----
Merge tag 'usb-7.0-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB/Thunderbolt fixes from Greg KH:
"Here are a bunch of USB and Thunderbolt fixes (most all are USB) for
7.0-rc7. More than I normally like this late in the release cycle,
partly due to my recent travels, and partly due to people banging away
on the USB gadget interfaces and apis more than normal (big shoutout
to Android for getting the vendors to actually work upstream on this,
that's a huge win overall for everyone here)
Included in here are:
- Small thunderbolt fix
- new USB serial driver ids added
- typec driver fixes
- gadget driver fixes for some disconnect issues
- other usb gadget driver fixes for reported problems with binding
and unbinding devices as happens when a gadget device connects /
disconnects from a system it is plugged into (or it switches device
mode at a user's request, these things are complex little
beasts...)
- usb offload fixes (where USB audio tunnels through the controller
while the main CPU is asleep) for when EMP spikes hit the system
causing disconnects to happen (as often happens with static
electricity in the winter months). This has been much reported by
at least one vendor, and resolves the issues they have been seeing
with this codepath. Can't wait for the "formal methods are the
answer!" people to try to model that one properly...
- Other small usb driver fixes for issues reported.
All of these have been in linux-next this week, and before, with no
reported issues, and I've personally been stressing these harder than
normal on my systems here with no problems"
* tag 'usb-7.0-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (39 commits)
usb: gadget: f_hid: move list and spinlock inits from bind to alloc
usb: host: xhci-sideband: delegate offload_usage tracking to class drivers
usb: core: use dedicated spinlock for offload state
usb: cdns3: gadget: fix state inconsistency on gadget init failure
usb: dwc3: imx8mp: fix memory leak on probe failure path
usb: gadget: f_uac1_legacy: validate control request size
usb: ulpi: fix double free in ulpi_register_interface() error path
usb: misc: usbio: Fix URB memory leak on submit failure
USB: core: add NO_LPM quirk for Razer Kiyo Pro webcam
usb: cdns3: gadget: fix NULL pointer dereference in ep_queue
usb: core: phy: avoid double use of 'usb3-phy'
USB: serial: option: add MeiG Smart SRM825WN
usb: gadget: f_rndis: Fix net_device lifecycle with device_move
usb: gadget: f_subset: Fix net_device lifecycle with device_move
usb: gadget: f_eem: Fix net_device lifecycle with device_move
usb: gadget: f_ecm: Fix net_device lifecycle with device_move
usb: gadget: u_ncm: Add kernel-doc comments for struct f_ncm_opts
usb: gadget: f_rndis: Protect RNDIS options with mutex
usb: gadget: f_subset: Fix unbalanced refcnt in geth_free
dt-bindings: connector: add pd-disable dependency
...
EPROBE_DEFER ensures IOMMU devices are probed before the devices that
depend on them. During shutdown, however, the IOMMU may be removed
first, leading to issues. To avoid this, a device link is added
which enforces the correct removal order.
Fixes: 8f77295525 ("ACPI: RISC-V: Add support for RIMT")
Signed-off-by: Sunil V L <sunilvl@oss.qualcomm.com>
Link: https://patch.msgid.link/20260303061605.722949-1-sunilvl@oss.qualcomm.com
Signed-off-by: Paul Walmsley <pjw@kernel.org>
EXPECT_EQ() expands to multiple lines, breaking up one-line if
statements. This issue was not present in the patch on the mailing list
but was instead introduced by the maintainer when attempting to fix up
checkpatch warnings. Add braces around EXPECT_EQ() to avoid the error
even though checkpatch suggests them to be removed:
validate_v_ptrace.c:626:17: error: ‘else’ without a previous ‘if’
Fixes: 3789d5eecd ("selftests: riscv: verify syscalls discard vector context")
Fixes: 30eb191c89 ("selftests: riscv: verify ptrace rejects invalid vector csr inputs")
Fixes: 849f05ae1e ("selftests: riscv: verify ptrace accepts valid vector csr values")
Signed-off-by: Charlie Jenkins <thecharlesjenkins@gmail.com>
Reviewed-and-tested-by: Sergey Matyukevich <geomatsi@gmail.com>
Link: https://patch.msgid.link/20260309-fix_selftests-v2-2-9d5a553a531e@gmail.com
Signed-off-by: Paul Walmsley <pjw@kernel.org>
In set_tagged_addr_ctrl(), when PR_TAGGED_ADDR_ENABLE is not set, pmlen
is correctly set to 0, but it forgets to reset pmm. This results in the
CPU pmm state not corresponding to the software pmlen state.
Fix this by resetting pmm along with pmlen.
Fixes: 2e17430858 ("riscv: Add support for the tagged address ABI")
Signed-off-by: Zishun Yi <vulab@iscas.ac.cn>
Reviewed-by: Samuel Holland <samuel.holland@sifive.com>
Link: https://patch.msgid.link/20260322160022.21908-1-vulab@iscas.ac.cn
Signed-off-by: Paul Walmsley <pjw@kernel.org>
Similar as commit 284922f4c5 ("x86: uaccess: don't use runtime-const
rewriting in modules") does, make riscv's runtime const not usable by
modules too, to "make sure this doesn't get forgotten the next time
somebody wants to do runtime constant optimizations". The reason is
well explained in the above commit: "The runtime-const infrastructure
was never designed to handle the modular case, because the constant
fixup is only done at boot time for core kernel code."
Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
Link: https://patch.msgid.link/20260221023731.3476-1-jszhang@kernel.org
Signed-off-by: Paul Walmsley <pjw@kernel.org>
Similarly to commit 8d09e2d569 ("arm64: patching: avoid early
page_to_phys()"), avoid using phys_to_page() for the kernel address case
in patch_map().
Since this is called from apply_boot_alternatives() in setup_arch(), and
commit 4267739cab ("arch, mm: consolidate initialization of SPARSE
memory model") has moved sparse_init() to after setup_arch(),
phys_to_page() is not available there yet, and it panics on boot with
SPARSEMEM on RV32, which does not use SPARSEMEM_VMEMMAP.
Reported-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Closes: https://lore.kernel.org/r/20260223144108-dcace0b9-02e8-4b67-a7ce-f263bed36f26@linutronix.de/
Fixes: 4267739cab ("arch, mm: consolidate initialization of SPARSE memory model")
Suggested-by: Mike Rapoport <rppt@kernel.org>
Signed-off-by: Vivian Wang <wangruikang@iscas.ac.cn>
Acked-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
Tested-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Link: https://patch.msgid.link/20260310-riscv-sparsemem-alternatives-fix-v1-1-659d5dd257e2@iscas.ac.cn
[pjw@kernel.org: fix the subject line to align with the patch description]
Signed-off-by: Paul Walmsley <pjw@kernel.org>
Fix several bugs in the RISC-V kgdb implementation:
- The element of dbg_reg_def[] that is supposed to pertain to the S1
register embeds instead the struct pt_regs offset of the A1
register. Fix this to use the S1 register offset in struct pt_regs.
- The sleeping_thread_to_gdb_regs() function copies the value of the
S10 register into the gdb_regs[] array element meant for the S9
register, and copies the value of the S11 register into the array
element meant for the S10 register. It also neglects to copy the
value of the S11 register. Fix all of these issues.
Fixes: fe89bd2be8 ("riscv: Add KGDB support")
Cc: Vincent Chen <vincent.chen@sifive.com>
Link: https://patch.msgid.link/fde376f8-bcfd-bfe4-e467-07d8f7608d05@kernel.org
Signed-off-by: Paul Walmsley <pjw@kernel.org>
