nsim_do_psp() handles both tx and rx psp processing in the sending
device's nsim_start_xmit() path. The existing code has a logical bug,
where we erroneously increment rx_bytes and rx_packets on the sending
devices stats, instead of the peer device.
Additionally, compute psp_len after psp_dev_encapsulate() and before
psp_dev_rcv(), which modifies the header region of the skb. The
existing calculation was actually correct, because psp_dev_rcv()
leaves skb_inner_transport_header pointing at the tcp header, but this
is fragile and confusing as there is no actual inner transport header
after psp_dev_rcv has removed udp encapsulation.
Fixes: 178f0763c5 ("netdevsim: implement psp device stats")
Cc: <stable+noautosel@kernel.org> # netdevsim is a test harness, it's never loaded on production systems
Signed-off-by: Daniel Zahka <daniel.zahka@gmail.com>
Link: https://patch.msgid.link/20260529-fix-psp-stats-v2-1-3a194eacf18e@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Writing to the netdevsim debugfs file
"netdevsim/netdevsimN/fib/nexthop_bucket_activity" enters
nsim_nexthop_bucket_activity_write(), which looks up a nexthop in
data->nexthop_ht under rtnl_lock(). If a network namespace teardown,
devlink reload or device deletion runs concurrently, nsim_fib_destroy()
frees that rhashtable (and the surrounding nsim_fib_data) while the
write is still in flight, leading to a slab-use-after-free:
BUG: KASAN: slab-use-after-free in nsim_nexthop_bucket_activity_write+0xb9e/0xdf0
Read of size 4 at addr ff1100001a379808 by task syz.0.11967/27894
CPU: 0 UID: 0 PID: 27894 Comm: syz.0.11967 Not tainted 7.1.0-rc4-gf6f1bfc1980a #4
Call Trace:
nsim_nexthop_bucket_activity_write+0xb9e/0xdf0
full_proxy_write+0x135/0x1a0
vfs_write+0x2e2/0x1040
ksys_write+0x146/0x270
__x64_sys_write+0x76/0xb0
do_syscall_64+0xb9/0x5b0
entry_SYSCALL_64_after_hwframe+0x74/0x7c
Allocated by task 15957:
rhashtable_init_noprof+0x3ec/0x860
nsim_fib_create+0x371/0xca0
nsim_drv_probe+0xd60/0x15c0
...
new_device_store+0x425/0x7f0
Freed by task 24:
rhashtable_free_and_destroy+0x10d/0x620
nsim_fib_destroy+0xc9/0x1c0
nsim_dev_reload_destroy+0x1e7/0x530
nsim_dev_reload_down+0x6b/0xd0
devlink_reload+0x1b5/0x770
devlink_pernet_pre_exit+0x25d/0x3a0
ops_undo_list+0x1b7/0xb90
cleanup_net+0x47f/0x8a0
The buggy address belongs to the object at ff1100001a379800
which belongs to the cache kmalloc-1k of size 1024
The freed 1k object is the bucket table of data->nexthop_ht. Shortly
after, the dangling table is dereferenced again and the machine also
takes a GPF in __rht_bucket_nested() from the same call site.
The root cause is a lifetime mismatch: the debugfs files reference
nsim_fib_data (the writer dereferences data->nexthop_ht), but the
interface is not bracketed around the lifetime of that data.
nsim_fib_destroy() freed both rhashtables and only removed the debugfs
directory afterwards, and nsim_fib_create() created the debugfs files
before the rhashtables were initialized and, on the error path, freed
them before removing the files. debugfs keeps the file itself alive
across a ->write() via debugfs_file_get()/debugfs_file_put()
(fs/debugfs/file.c), but it does not keep data->nexthop_ht alive, so the
in-flight writer dereferenced freed memory. rtnl_lock() in the writer
does not help, because the teardown path does not take rtnl around
rhashtable_free_and_destroy().
Fix it by bracketing the debugfs interface around the data it exposes,
keeping nsim_fib_create() and nsim_fib_destroy() symmetric:
- In nsim_fib_destroy(), tear down the debugfs files before the data
structures they reference. debugfs_remove_recursive() drops the
initial active-user reference and then waits for every in-flight
->write() to drop its reference before returning, and rejects new
opens (__debugfs_file_removed(), fs/debugfs/inode.c). Once it returns,
no debugfs accessor can reach the FIB data, so the rhashtables and
nsim_fib_data can be destroyed safely. This also covers the bool knobs
in the same directory, which store pointers into the same
nsim_fib_data, and the final kfree(data).
- In nsim_fib_create(), create the debugfs files after the rhashtables
and notifiers are set up. This closes the same race on the
error-unwind path, where a concurrent writer could otherwise observe a
half-constructed instance or a table that the unwind has already
freed. (With only the destroy-side change, a writer racing the create
window instead dereferences an uninitialized data->nexthop_ht.)
This is reproducible by racing, in a loop, writes to
/sys/kernel/debug/netdevsim/netdevsimN/fib/nexthop_bucket_activity
against a teardown of the same netdevsim instance -- a devlink reload
("devlink dev reload netdevsim/netdevsimN"), destroying the network
namespace it lives in, or "echo N > /sys/bus/netdevsim/del_device". It
was found with syzkaller; a syzkaller reproducer is available. A
standalone C reproducer does not trigger it reliably because the race
needs the netns-teardown/reload path.
Cc: <stable+noautosel@kernel.org> # netdevsim is a test harness, it's never loaded on production systems
Signed-off-by: Zijing Yin <yzjaurora@gmail.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Link: https://patch.msgid.link/20260529135718.1804031-1-yzjaurora@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add new tunnel test cases for ip6tnl, ipip, and sit. ip6tnl supports
ipv[46] as inner l3 header, and the other two tunnels only support a
single inner l3 type.
Signed-off-by: Daniel Zahka <daniel.zahka@gmail.com>
Link: https://patch.msgid.link/20260529-tso-tunnels-v1-1-3771ee9eaaa9@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Sven Eckelmann:
- drop batman-adv specific version
- MAINTAINERS housekeeping for batman-adv (two patches)
- add missing includes
- use atomic_xchg() for gw.reselect check
- extract netdev wifi detection information object
- replace inappropriate atomic access with (READ|WRITE)_ONCE
(six patches)
- tt: replace open-coded overflow check with helper
- tvlv: avoid unnecessary OGM buffer reallocations
- use neigh_node's orig_node only as id
-----BEGIN PGP SIGNATURE-----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=bwmN
-----END PGP SIGNATURE-----
Merge tag 'batadv-next-pullrequest-20260601' of https://git.open-mesh.org/batadv
Simon Wunderlich says:
====================
This batman-adv cleanup patchset includes the following patches, all by
Sven Eckelmann:
- drop batman-adv specific version
- MAINTAINERS housekeeping for batman-adv (two patches)
- add missing includes
- use atomic_xchg() for gw.reselect check
- extract netdev wifi detection information object
- replace inappropriate atomic access with (READ|WRITE)_ONCE
(six patches)
- tt: replace open-coded overflow check with helper
- tvlv: avoid unnecessary OGM buffer reallocations
- use neigh_node's orig_node only as id
* tag 'batadv-next-pullrequest-20260601' of https://git.open-mesh.org/batadv:
batman-adv: use neigh_node's orig_node only as id
batman-adv: tvlv: avoid unnecessary OGM buffer reallocations
batman-adv: tt: replace open-coded overflow check with helper
batman-adv: replace non-atomic last_ttvn with (READ|WRITE)_ONCE
batman-adv: replace non-atomic packet_size_max with (READ|WRITE)_ONCE
batman-adv: replace non-atomic mesh state with (READ|WRITE)_ONCE
batman-adv: replace non-atomic vlan config fields with (READ|WRITE)_ONCE
batman-adv: replace non-atomic hardif config fields with (READ|WRITE)_ONCE
batman-adv: replace non-atomic meshif config fields with (READ|WRITE)_ONCE
batman-adv: extract netdev wifi detection information object
batman-adv: use atomic_xchg() for gw.reselect check
batman-adv: add missing includes
MAINTAINERS: Don't send batman-adv patches to netdev
MAINTAINERS: Rename batman-adv T(ree)
batman-adv: drop batman-adv specific version
====================
Link: https://patch.msgid.link/20260601123629.707089-1-sw@simonwunderlich.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Both struct socket and struct sock have a variable to
manage its state, sock->state and sk->sk_state.
When both are used, the former typically manages syscall
state and the latter manages the actual connection state.
AF_UNIX only uses sk->sk_state.
Let's remove unnecessary assignemnts for sock->state.
Signed-off-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20260529191829.3864438-1-kuniyu@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
As done in pppoe.sh, start socat as the syslog listener. In case the
test fails, dump its log to see what's going on.
Signed-off-by: Qingfang Deng <qingfang.deng@linux.dev>
Reviewed-by: Matthieu Baerts <matttbe@kernel.org>
Link: https://patch.msgid.link/20260529021146.5739-1-qingfang.deng@linux.dev
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Stefan Wahren says:
====================
net: phy: dp83822: Add optional external PHY clock
This small series implement support for external PHY clock for the
dp83822 driver.
====================
Link: https://patch.msgid.link/20260528184642.33424-1-wahrenst@gmx.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In some cases, the PHY can use an external ref clock source instead of a
crystal.
Add an optional clock in the PHY node to make sure that the clock source
is enabled, if specified, before probing.
Signed-off-by: Stefan Wahren <wahrenst@gmx.net>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20260528184642.33424-3-wahrenst@gmx.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Introduce a local pointer for device so devm_kzalloc() fit into
a single line. Also this makes following changes easier to read.
Signed-off-by: Stefan Wahren <wahrenst@gmx.net>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20260528184642.33424-2-wahrenst@gmx.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Some compilers do not inline bpf_skops_hdr_opt_len() from
tcp_established_options(), forcing an expensive stack canary
when CONFIG_STACKPROTECTOR_STRONG=y.
Change bpf_skops_hdr_opt_len() to return @remaining by value
to remove this stack canary from TCP fast path.
$ scripts/bloat-o-meter -t vmlinux.old vmlinux.new
add/remove: 0/0 grow/shrink: 1/1 up/down: 10/-59 (-49)
Function old new delta
bpf_skops_hdr_opt_len 297 307 +10
tcp_established_options 574 515 -59
Total: Before=31456795, After=31456746, chg -0.00%
Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Reviewed-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20260601093819.469626-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The MIPS bcm53xx platform still uses the legacy gpiolib interfaces based
on gpio numbers, but other platforms do not.
Hide these interfaces inside of the existing #ifdef block and use the
modern interfaces in the common parts of the driver to allow building
it when the gpio_set_value() is left out of the kernel.
Reviewed-by: Jonas Gorski <jonas.gorski@gmail.com>
Reviewed-by: Linus Walleij <linusw@kernel.org>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Reviewed-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://patch.msgid.link/20260601165716.648230-1-arnd@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Minda Chen says:
====================
Add StarFive jhb100 soc SGMII GMAC support
jhb100 is a Starfive new RISC-V SoC for datacenter BMC (BaseBoard
Managent Controller). Similar with Aspeed 27x0.
The jhb100 minimal system upstream is in progress:
https://patchwork.kernel.org/project/linux-riscv/cover/20260508053632.818548-1-changhuang.liang@starfivetech.com/
jhb100 GMAC still using designware GMAC core like JH7100 and JH7110,
and contains 2 SGMII interfaces, 1 RGMII/RMII interface, 1 RMII
interface. In JH7100/JH7110 dwmac-starfive.c have supported RGMII/RMII
interface. So require to add SGMII support to dwmac-starfive.c for JHB100.
SGMII serdes PHY has been integrated in JHB100 and do not have driver
setting.
In JHB100 EVB board, SGMII connect with motorcomm YT8531s external PHY
and support RJ45 ethernet port.
====================
Link: https://patch.msgid.link/20260527084108.121416-1-minda.chen@starfivetech.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add jhb100 compatible and SGMII support. jhb100 soc contains
2 SGMII interfaces and integrated with serdes PHY. SGMII with
split TX/RX MAC clock and need to set 2.5M/25M/125M TX/RX clock
rate in 10M/100M/1000M speed mode.
Signed-off-by: Minda Chen <minda.chen@starfivetech.com>
Reviewed-by: Sai Krishna <saikrishnag@marvell.com>
Link: https://patch.msgid.link/20260527084108.121416-4-minda.chen@starfivetech.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The jhb100 GMAC still using Synopsys designware GMAC core.
hardware features are similar with jh7100.
Add jhb100 GMAC compatible and reset, interrupts features.
jhb100 dwmac has only one reset signal and one interrupt
line.
jhb100 SGMII interface tx/rx mac clock is split and require to
set clock rate in 10M/100M/1000M speed. So dts need to add a
new rx clock in code, dts and dt binding doc.
Signed-off-by: Minda Chen <minda.chen@starfivetech.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://patch.msgid.link/20260527084108.121416-3-minda.chen@starfivetech.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Remove jh8100 dt-bindings because do not support it now.
StarFive have stopped jh8100 developing and will not release
it outside.
Signed-off-by: Minda Chen <minda.chen@starfivetech.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20260527084108.121416-2-minda.chen@starfivetech.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
qrtr_send_resume_tx() calls qrtr_node_lookup() which takes a
reference on the returned node. If the subsequent call to
qrtr_alloc_ctrl_packet() fails due to memory allocation failure, the
function returns -ENOMEM without calling qrtr_node_release() to
release the node reference.
Add qrtr_node_release(node) before returning on the allocation failure
path to properly release the reference.
Signed-off-by: Wentao Liang <vulab@iscas.ac.cn>
Reviewed-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Reviewed-by: Manivannan Sadhasivam <mani@kernel.org>
Link: https://patch.msgid.link/20260528080019.1176700-1-vulab@iscas.ac.cn
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This patch updates the lan743x driver to prevent the use of netdev-based
logging APIs (such as netdev_dbg) before the network device has been
successfully registered. Using netdev-based logging prior to registration
results in log messages referencing "(unnamed net_device) (uninitialized)",
which can be confusing and less informative.
The driver must use netif_msg_ APIs and device-based logging (e.g. dev_dbg)
until netdev registration is complete. This ensures log entries are
associated with the correct device context and improves log clarity. After
registration, netdev-based logging APIs can be used safely.
Signed-off-by: David Thompson <davthompson@nvidia.com>
Link: https://patch.msgid.link/20260528165017.421576-1-davthompson@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
SAP (Service Access Point) suspend occasionally times out with error
-110 (ETIMEDOUT), followed by modem port errors and complete modem
failure requiring a system reboot to recover.
Error symptoms:
mtk_t7xx 0000:72:00.0: [PM] SAP suspend error: -110
mtk_t7xx 0000:72:00.0: can't suspend (...returned -110)
mtk_t7xx 0000:07:00.0: Failed to send skb: -22
mtk_t7xx 0000:07:00.0: Write error on MBIM port, -22
The modem firmware needs time after receiving the MD (modem) suspend
request to complete internal operations before it is ready to accept
the SAP suspend request. Without this delay, if runtime PM attempts
to suspend while the firmware is busy, the SAP suspend command times
out, leaving the modem in an unrecoverable state.
Root cause and userspace interaction:
ModemManager 1.24+ includes changes that reduce the likelihood of this
issue by ensuring the modem is in a low-power state before the kernel
attempts runtime suspend. However, the kernel driver should not depend
on specific userspace behavior or ModemManager versions. Older versions
(1.20-1.22) are still widely deployed, and the kernel should be robust
regardless of userspace implementation details.
There appears to be no hardware status register or other mechanism
available to query whether the firmware is ready for SAP suspend.
A delay between the two suspend requests is the most reliable solution
found through testing.
Add a 50ms delay between MD suspend and SAP suspend. This gives the
firmware adequate time to complete internal operations without adding
significant latency to the suspend path. This makes the driver robust
across all ModemManager versions and system conditions.
Testing: 96+ hours of continuous operation with ModemManager 1.20.2
and Fibocom FM350-GL modem. Zero SAP suspend timeouts observed across
2000+ successful suspend/resume cycles. Previously failed within
24 hours with 100% reproducibility.
Signed-off-by: Jose Ignacio Tornos Martinez <jtornosm@redhat.com>
Reviewed-by: Loic Poulain <loic.poulain@oss.qualcomm.com>
Link: https://patch.msgid.link/20260527061451.12710-1-jtornosm@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The "OEM"/"SFP-10G-T" quirk entry in sfp_fixup_rollball_cc()
unconditionally forces MDIO_I2C_ROLLBALL for all modules matching that
vendor/part-number combination. This works for modules that genuinely
implement a RollBall I2C-to-MDIO bridge, but silently breaks modules
that share the same EEPROM strings without having such a bridge.
The Realtek RTL8261BE-CG is one such module: a pure copper 10G SFP+
media converter with no I2C-to-MDIO bridge. Its EEPROM reports
vendor="OEM", part="SFP-10G-T-I", and -- critically -- Vendor OUI
00:00:00, making OUI-based differentiation impossible. With
MDIO_I2C_ROLLBALL forced, the module silently ACKs the unlock password
write, the MDIO bus is created, but no PHY responds; the SFP state
machine cycles through the RollBall PHY-probe retry window before
reporting no PHY.
Move the probe into i2c_mii_init_rollball() in mdio-i2c.c, where the
RollBall protocol constants are already defined. After sending the
unlock password, issue a CMD_READ and poll for CMD_DONE up to 200 ms
(10 x 20 ms, matching the existing rollball poll tolerance). A genuine
RollBall bridge asserts CMD_DONE within that window; modules without a
bridge never do, so i2c_mii_init_rollball() returns -ENODEV.
mdio_i2c_alloc() propagates -ENODEV to the caller to signal that no
bridge is present and PHY probing should be skipped.
sfp_sm_add_mdio_bus() catches -ENODEV and transitions
sfp->mdio_protocol to MDIO_I2C_NONE so the rest of the state machine
skips PHY probing for this module.
Any I2C-level error (NACK, timeout) during the probe is also treated as
-ENODEV: if the module does not respond at I2C address 0x51 at all,
there is certainly no RollBall bridge there, and SFP initialization
should not abort.
The probe writes are safe with respect to SFP EEPROM integrity: only
modules explicitly listed in the quirk table enter this path, and the
RollBall password unlock write to 0x51 was already issued by
i2c_mii_init_rollball() before the probe for all such modules. Any
module without a device at 0x51 NACKs the transfer and is treated as
-ENODEV.
Add "OEM"/"SFP-10G-T-I" to the quirk table so RTL8261BE modules enter
the probe path; genuine RollBall modules continue to work as before.
Signed-off-by: Petr Wozniak <petr.wozniak@gmail.com>
Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Link: https://patch.msgid.link/20260527053909.2118-1-petr.wozniak@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Fidan Aliyeva says:
====================
mv88e6xxx: SERDES on mv88e6321
This patch series add code support to be able to use SERDES feature of
mv88e6321 version of Marvel mv88e6xxx series. mv88e6321 has 2 ports to
support high speed SERDES but the support is lacking in the driver.
mv88e6321 version has a similar architecture to mv88e6352 version making it
possible to reuse its pcs functions. That's why the patch series consist of
2 parts:
1. Refactor the serdes functions and pcs_init of mv88e6352 to be more
generic (patches 1-2).
2. Add the SERDES support for mv88e6321 reusing 6352's pcs functions
The final code has been tested on mv88e6321 ethernet device directly by ip
ping tests, performance tests and also verifying the switch's expected
register values.
Referred document: 88E6321/88E6320 Functional Specification
====================
Link: https://patch.msgid.link/20260528210310.1365858-1-fidan.aliyeva.ext@ericsson.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add serdes and pcs_ops functions for mv88e6321. In mv88e6321
2 ports support serdes functionality; port 0 and port 1. These ports are
serdes-only ports.
Changes:
1. Add a function support to return the lane address for the port based on
cmode.
2. Reuse mv88e6352's serdes_get_regs* and pcs_init functions for mv88e6321.
Tested on mv88e6321 switch port 0.
Co-developed-by: Thomas Eckerman <thomas.eckerman.ext@ericsson.com>
Signed-off-by: Thomas Eckerman <thomas.eckerman.ext@ericsson.com>
Signed-off-by: Fidan Aliyeva <fidan.aliyeva.ext@ericsson.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20260528210310.1365858-4-fidan.aliyeva.ext@ericsson.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Changes:
1. Replace serdes check by mv88e6352_g2_scratch_port_has_serdes in
mv88e6352_pcs_init function by mv88e6xxx_serdes_get_lane function making it
more generic.
2. Replace serdes checks in mv88e6352_serdes_get_* functions with
mv88e6xxx_serdes_get_lane making them more generic.
3. Add lane argument to mv88e6352_serdes_read so it can be reused later for
6321.
Co-developed-by: Thomas Eckerman <thomas.eckerman.ext@ericsson.com>
Signed-off-by: Thomas Eckerman <thomas.eckerman.ext@ericsson.com>
Signed-off-by: Fidan Aliyeva <fidan.aliyeva.ext@ericsson.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20260528210310.1365858-3-fidan.aliyeva.ext@ericsson.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Changes:
1. Add mv88e6352_serdes_get_lane function which checks if the port
supports SERDES by calling mv88e6352_g2_scratch_port_has_serdes. Then
returns the address of the SERDES lane.
2. Add this function as .serdes_get_lane member to all the chip
versions which use mv88e6352_pcs_init.
Co-developed-by: Thomas Eckerman <thomas.eckerman.ext@ericsson.com>
Signed-off-by: Thomas Eckerman <thomas.eckerman.ext@ericsson.com>
Signed-off-by: Fidan Aliyeva <fidan.aliyeva.ext@ericsson.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20260528210310.1365858-2-fidan.aliyeva.ext@ericsson.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Markus Stockhausen says:
====================
net: mdio: realtek-rtl9300: SoC independent command runner
The Realtek Otto switch platform consist of four different series
- RTL838x aka maple : 28 port 1G Switches
- RTL839x aka cypress : 52 port 1G Switches
- RTL930x aka longan : 28 port 1G/2.5G/10G Switches
- RTL931x aka mango : 56 port 1G/2.5G/10G Switches
After establishing basic groundwork for multi device support, this series
harmonizes the command handling of the MDIO driver. It is the second step
to allow easier integration of the non RTL930x SoCs into this driver.
====================
Link: https://patch.msgid.link/20260527163449.1294961-1-markus.stockhausen@gmx.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Convert the final missing read_c22() path to the new read enabled command
runner. Do it the same way as other implementations.
- bus calls otto_emdio_read_c22()
- this hands over to SoC specific otto_emdio_9300_read_c22()
- finally the registers are filled and the runner issued
With this cleanup remove the obsolete helper otto_emdio_wait_ready()
Signed-off-by: Markus Stockhausen <markus.stockhausen@gmx.de>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20260527163449.1294961-5-markus.stockhausen@gmx.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Convert the read_c45() path to the new command runner. This needs the
additional helper otto_emdio_read_cmd() that can issue the command runner
and process a read operation. It is basically nothing more than
- run the command
- read the command result thorugh the I/O register
With this in place convert the read_c45() like the alread existing write
C22/C45 implementation.
- bus calls otto_emdio_read_c45()
- this handed over to SoC specific otto_emdio_9300_read_c45()
- the registers are filled
- the otto_emdio_read_cmd() is issued
- that calls the command runner
Signed-off-by: Markus Stockhausen <markus.stockhausen@gmx.de>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20260527163449.1294961-4-markus.stockhausen@gmx.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Now that the driver has a generic command runner make use of it in the
write_c22() path. For this.
- add generic otto_emdio_write_c22() helper that will be called by bus
- convert otto_emdio_9300_write_c22() to new command runner logic
Signed-off-by: Markus Stockhausen <markus.stockhausen@gmx.de>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20260527163449.1294961-3-markus.stockhausen@gmx.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The current bus read/write commands for C22/C45 are RTL930x specific.
Avoid to duplicate those 200 lines of code for the RTL838x, RTL839x and
RTL931x targets. Instead provide a generic command runner that is SoC
independent. The implementation works as follows:
The runner will take a prepared list of the four MDIO registers. It will
feed the data into the registers. This generic write to all registers
(or to say "a little bit too much") is no issue. The hardware looks at
the to be executed command and will only take the pieces of data that
are really required. No side effects have been observed on any of the
four SoCs during the time this mechanism exists in downstream OpenWrt.
The last fed register is the C22/command register. This will be enriched
with the proper command flags from the caller. The hardware issues the
command and the runner will wait for its finalization.
Besides from feeding all registers the runner emulates the behaviour of
the old code as best as possible
- check defensively for a running command in advance
- Before this commit the driver had different MMIO timeout values.
1000s for command preparation, 100us after writes and 1000us after
reads. The new version uses a consistent 1000us timeout for all
of these.
- return -ENXIO in case of hardware failure (fail bit)
As a first consumer of this runner convert the write_c45() function.
This is realized in a multi stage approach
- a generic otto_emdio_write_c45() will be called by the bus
- this will forward the request to the device specific writer. In this
case otto_emdio_9300_write_c45().
- There the command data is filled in and the additional helper
otto_emdio_write_cmd() will be called
- That adds the write flag and issues the generic command runner.
With all the above mentioned in place, there is not much left to do in
otto_emdio_9300_write_c45(). It just fills the register fields and
calls the write helper with the right command bits.
Signed-off-by: Markus Stockhausen <markus.stockhausen@gmx.de>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20260527163449.1294961-2-markus.stockhausen@gmx.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The AX.25 subsystem was removed in commit dd8d4bc28a
("net: remove ax25 and amateur radio (hamradio) subsystem"),
which removed the ax25_ptr field from struct net_device but
left behind the kdoc comment and documentation.
Signed-off-by: Costa Shulyupin <costa.shul@redhat.com>
Reviewed-by: Randy Dunlap <rdunlap@infradead.org>
Link: https://patch.msgid.link/20260531134837.4111349-1-costa.shul@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Since TCP BBR congestion control was introduced in
commit 0f8782ea14 ("tcp_bbr: add BBR congestion control")
it has always been offered as "Dual BSD/GPL":
MODULE_LICENSE("Dual BSD/GPL");
A GPL-2.0-only SPDX header was erroneously added in the recent
commit 2ed4b46b4f ("net: Add SPDX ids to some source files").
This commit revises the tcp_bbr.c SPDX-License-Identifier to note that
this file is licensed as "GPL-2.0 OR BSD-3-Clause".
Fixes: 2ed4b46b4f ("net: Add SPDX ids to some source files")
Signed-off-by: Neal Cardwell <ncardwell@google.com>
Cc: Yuchung Cheng <ycheng@google.com>
Cc: Van Jacobson <vanj@google.com>
Cc: Soheil Hassas Yeganeh <soheil@google.com>
Reviewed-by: Tim Bird <tim.bird@sony.com>
Link: https://patch.msgid.link/20260531183558.2337381-1-ncardwell.sw@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The IBM EMAC programs its Maximum Jumbo Size (MJS) drop
threshold from ndev->mtu directly. The hardware sizes the threshold
against the L2 frame minus the ethernet header, but does not
discount the 802.1Q tag, so a frame carrying a VLAN tag and a full
1500-byte payload exceeds MJS by exactly 4 bytes and is dropped.
This is normally hidden because JPSM (and therefore the MJS check)
only engages when the MTU is raised above ETH_DATA_LEN. With the
qca8k DSA tagger the conduit MTU is bumped by QCA_HDR_LEN to 1502
during dsa_conduit_setup(), which is enough to enable JPSM and
expose the off-by-VLAN-tag in the limit.
Pad MJS by VLAN_HLEN so a VLAN-tagged full-MTU frame passes.
Reported on Meraki MX60 (qca8k switch): tagged VLAN
traffic drops at 1500-byte payload, while 1496 bytes works
and untagged 1500 bytes works.
Assisted-by: Claude:Opus-4.7
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Link: https://patch.msgid.link/20260526202247.13823-1-rosenp@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The orig_node member of struct batadv_neigh_node is no longer used in
B.A.T.M.A.N. IV. But batadv_neigh_node_create() is still storing it.
Only batadv_v_ogm_route_update() uses it to check if we route toward
it - not needing the data stored in the batadv_orig_node object itself,
but merely a pointer to identify the originator.
The field cannot hold a proper reference because that would create a
reference cycle, so it must never be dereferenced. Rename it to
orig_node_id and mark it __private to make any future attempt to
dereference it immediately noticeable.
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Both OGMv1 (on the primary interface) and OGM2 unconditionally reallocated
their packet buffer on every transmission cycle, regardless of whether the
required size had changed. This meant a kfree/kmalloc pair even when the
TVLV payload size was identical to the previous send.
Introduce struct batadv_ogm_buf to encapsulate the OGM packet buffer
together with its current length, allocated capacity, and fixed header
length. This consolidates the separate buf/len arguments that were
previously threaded through each call site.
In batadv_tvlv_realloc_packet_buff(), the capacity is rounded up to the
next power of two so that small growth or shrinkage in TVLV data does not
trigger a reallocation. When kmalloc fails but the existing buffer is large
enough to hold the new data, the oversized buffer is reused rather than
returning an error.
Signed-off-by: Sven Eckelmann <sven@narfation.org>
The commit 6043a632dd06 ("batman-adv: reject oversized global TT response
buffers") introduced an open-coded check to ensure that the allocated
buffer size can be stored in a u16. The check_add_overflow() helper can
perform the addition and overflow check in one step, so use that instead.
Acked-by: Antonio Quartulli <antonio@mandelbit.com>
Signed-off-by: Sven Eckelmann <sven@narfation.org>
The last TT version number of an meshif is only accessed as plain
loads/stores and does not require full atomic_t semantics. Convert to an
native integer and replace its users with READ_ONCE()/WRITE_ONCE() to avoid
load/store tearing.
Signed-off-by: Sven Eckelmann <sven@narfation.org>
The maximum packet size of an meshif is only accessed as plain loads/stores
and does not require full atomic_t semantics. Convert to a native integer
and replace its users with READ_ONCE()/WRITE_ONCE() to avoid load/store
tearing.
Signed-off-by: Sven Eckelmann <sven@narfation.org>
The mesh state is only accessed as plain loads/stores and does not require
full atomic_t semantics. Convert to an enum and replace its users with
READ_ONCE()/WRITE_ONCE() to avoid load/store tearing.
Signed-off-by: Sven Eckelmann <sven@narfation.org>
The vlan configuration values are only accessed as plain loads/stores and
do not require full atomic_t semantics. Convert these fields to native
integer types and replace their users with READ_ONCE()/WRITE_ONCE() to
avoid load/store tearing.
Signed-off-by: Sven Eckelmann <sven@narfation.org>
The hardif configuration values are only accessed as plain loads/stores and
do not require full atomic_t semantics. Convert these fields to native
integer types and replace their users with READ_ONCE()/WRITE_ONCE() to
avoid load/store tearing.
Signed-off-by: Sven Eckelmann <sven@narfation.org>
The meshif configuration values are only accessed as plain loads/stores and
do not require full atomic_t semantics. Convert these fields to native
integer types and replace their users with READ_ONCE()/WRITE_ONCE() to
avoid load/store tearing.
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Previously, wifi_flags were stored directly in batadv_hard_iface, which is
created for every network interface on the system (including those never
attached to a mesh interface). This wastes memory and complicates the
long-term goal of lazily allocating batadv_hard_iface only for interfaces
that actually join a mesh.
The problem is that several batman-adv features need wifi detection for
net_devices (and their underlying devices) regardless of whether a
batadv_hard_iface exists for them:
* B.A.T.M.A.N. IV TQ hop penalty calculation
* B.A.T.M.A.N. V ELP probing / throughput estimation
* AP isolation
To decouple wifi detection from batadv_hard_iface lifetime, introduce a
global rhashtable (batadv_wifi_net_devices) mapping net_device pointers to
batadv_wifi_net_device_state objects. Only net_devices that are actually
detected as (indirect) wifi interfaces occupy an entry, keeping the common
(non-wifi) case allocation-free.
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Conflicts:
drivers/net/ethernet/microsoft/mana/mana_en.c:
17bfe0a8c0 ("net: mana: Add NULL guards in teardown path to prevent panic on attach failure")
d07efe5a6e ("net: mana: Use per-queue allocation for tx_qp to reduce allocation size")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
this out is because the IPsec and Bluetooth PRs did not make it
yesterday. I don't want to have to send you all of this + whatever
comes next week, for rc7. The fixes under "Previous releases -
regressions" are for real user-reported regressions from v7.0.
Previous releases - regressions:
- Revert "ipv6: preserve insertion order for same-scope addresses"
- xfrm: move policy_bydst RCU sync, a fix which added a sync RCU
on netns exit got backported to stable and was causing serious
accumulation of dying netns's for real workloads
- pcs-mtk-lynxi: fix bpi-r3 serdes configuration
Previous releases - always broken:
- usual grab bag of race, locking and leak fixes for Bluetooth
- handful of page handling fixes for IPsec
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=ttPc
-----END PGP SIGNATURE-----
Merge tag 'net-7.1-rc6-2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull more networking fixes from Jakub Kicinski:
"Quick follow up, nothing super urgent here. Main reason I'm sending
this out is because the IPsec and Bluetooth PRs did not make it
yesterday. I don't want to have to send you all of this + whatever
comes next week, for rc7. The fixes under "Previous releases -
regressions" are for real user-reported regressions from v7.0.
Previous releases - regressions:
- Revert "ipv6: preserve insertion order for same-scope addresses"
- xfrm: move policy_bydst RCU sync, a fix which added a sync RCU on
netns exit got backported to stable and was causing serious
accumulation of dying netns's for real workloads
- pcs-mtk-lynxi: fix bpi-r3 serdes configuration
Previous releases - always broken:
- usual grab bag of race, locking and leak fixes for Bluetooth
- handful of page handling fixes for IPsec"
* tag 'net-7.1-rc6-2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (36 commits)
wireguard: send: append trailer after expanding head
Revert "ipv6: preserve insertion order for same-scope addresses"
net: skbuff: fix pskb_carve leaking zcopy pages
ipv6: fix possible infinite loop in fib6_select_path()
ipv6: fix possible infinite loop in rt6_fill_node()
bpf: sockmap: fix tail fragment offset in bpf_msg_push_data
vsock/virtio: bind uarg before filling zerocopy skb
Revert "esp: fix page frag reference leak on skb_to_sgvec failure"
net: pcs: pcs-mtk-lynxi: fix bpi-r3 serdes configuration
sctp: fix race between sctp_wait_for_connect and peeloff
net: mana: Skip redundant detach on already-detached port
net: mana: Add NULL guards in teardown path to prevent panic on attach failure
Bluetooth: hci_sync: Reset device counters in hci_dev_close_sync()
Bluetooth: hci_sync: Set HCI_CMD_DRAIN_WORKQUEUE during device close
Bluetooth: hci_core: Rework hci_dev_do_reset() to use hci_sync functions
Bluetooth: ISO: serialize iso_sock_clear_timer with socket lock
Bluetooth: ISO: fix UAF in iso_recv_frame
Bluetooth: L2CAP: Fix possible crash on l2cap_ecred_conn_rsp
Bluetooth: l2cap: clear chan->ident on ECRED reconfiguration success
Bluetooth: hci_qca: Use 100 ms SSR delay for rampatch and NVM loading
...
- Account for recently implemented -Wattribute-alias in clang by
disabling it in the same places it is disabled for GCC.
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQR74yXHMTGczQHYypIdayaRccAalgUCahnrhQAKCRAdayaRccAa
loxRAP0dhAttt5Nzj1QVvVshp5gUdELM+zXD1qyXAY9Z81V3rgD8C867ax5pGAgO
kV2PwaBK5P6FJ8joUz4m3qB20FXXYQs=
=drMM
-----END PGP SIGNATURE-----
Merge tag 'clang-fixes-7.1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/nathan/linux
Pull clang build fix from Nathan Chancellor:
"A small fix to disable -Wattribute-alias for clang in the few places
it is already disabled for GCC, now that tip of tree clang has
implemented -Wattribute-alias as GCC has"
* tag 'clang-fixes-7.1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/nathan/linux:
Disable -Wattribute-alias for clang-23 and newer
- Restore CONFIG_PKVM_DISABLE_STAGE2_ON_PANIC to its former glory by
making sure the config symbol is correctly spelled out in the code
- Don't reset the AArch32 view of the PMU counters to zero when the
guest is writing to them
- Fix an assorted collection of memory leaks in the newly added tracing
code
- Fix the capping of ZCR_EL2 which could be used in an unsanitised way
by an L2 guest
x86:
- Include the kernel's linux/mman.h in KVM selftests to ensure MADV_COLLAPSE
is defined, as older libc versions may not provide it.
- Include execinfo.h if and only if KVM selftests are building against glibc,
and provide a test_dump_stack() for non-glibc builds.
- Silence an annoying RCU splat on (even non-KVM-related) panics. The splat
is technically legit, but in practice not an issue. To have a race, you
would need to unload the KVM modules at exactly the time a panic happens;
and speaking of incredibly rare races, taking the locks risks introducing
a deadlock if the module unload code took the lock on a CPU that has been
halted. Which seems possibly more likely than the RCU grace period issue,
so just shut it up. This code used to be in KVM but is now outside it;
but the x86 maintainers haven't picked it up, so here we are.
- Rate-limit global clock updates once again (but without delayed work), as
KVM was subtly relying on the old rate-limiting for NPT correction to guard
against "update storms" when running without a master clock on systems with
overcommitted CPUs.
- Fix a brown paper bag goof where KVM checked if ERAPS is "dirty" instead of
marking it dirty when emulating INVPCID.
- Flush the TLB when transitioning from xAVIC => x2AVIC to ensure the CPU TLB
doesn't contain AVIC-tagged entries for the APIC base GPA.
- The top 10 commits fix buffer overflow (and potential TOC/TOU) flaws in the
page state change protocol for encrypted VMs. AI models find it quite
easily given it was reported three times, but aren't as good at writing
a comprehensive fix. There's more to clean up in the area, which will
come in 7.2.
-----BEGIN PGP SIGNATURE-----
iQFIBAABCgAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmoZ2qQUHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroPPFQgAhDwSk+VVnn4vuerijZh6eo3Tz4EQ
af0Ccng1uDuTuz9HzkF/ffR4z3tBMYtUhVtUiPu5xrUabzmIW7T0roNvsCwzVZor
ekZt3Y8FgwSgF+nxbBQQXBPvv+tOHpoIhfbirftWE9tRRFivfK1Z1duRGwsv7Seb
0eK+iB1huJLjXqIZQtSLEY44LSoQbDIt/StkkYFLUr10oOvTRCFiu2wPA2gZrK56
KTVrCg7rtn135wh8TVA72u+pIszylIPFTQ1HbbzzBoQ8/Opp0olFL3q0HeAwkx6D
q0EJiNMP0QD8NDC7Q8efAit4wI0pXE4Y6ScHQJTm3p+hB6KXc9o7LKbCmA==
=6jit
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull kvm fixes from Paolo Bonzini:
"arm64:
- Restore CONFIG_PKVM_DISABLE_STAGE2_ON_PANIC to its former glory by
making sure the config symbol is correctly spelled out in the code
- Don't reset the AArch32 view of the PMU counters to zero when the
guest is writing to them
- Fix an assorted collection of memory leaks in the newly added
tracing code
- Fix the capping of ZCR_EL2 which could be used in an unsanitised
way by an L2 guest
x86:
- Include the kernel's linux/mman.h in KVM selftests to ensure
MADV_COLLAPSE is defined, as older libc versions may not provide
it.
- Include execinfo.h if and only if KVM selftests are building
against glibc, and provide a test_dump_stack() for non-glibc
builds.
- Silence an annoying RCU splat on (even non-KVM-related) panics.
The splat is technically legit, but in practice not an issue. To
have a race, you would need to unload the KVM modules at exactly
the time a panic happens; and speaking of incredibly rare races,
taking the locks risks introducing a deadlock if the module unload
code took the lock on a CPU that has been halted. Which seems
possibly more likely than the RCU grace period issue, so just shut
it up. This code used to be in KVM but is now outside it; but the
x86 maintainers haven't picked it up, so here we are.
- Rate-limit global clock updates once again (but without delayed
work), as KVM was subtly relying on the old rate-limiting for NPT
correction to guard against "update storms" when running without a
master clock on systems with overcommitted CPUs.
- Fix a brown paper bag goof where KVM checked if ERAPS is "dirty"
instead of marking it dirty when emulating INVPCID.
- Flush the TLB when transitioning from xAVIC => x2AVIC to ensure the
CPU TLB doesn't contain AVIC-tagged entries for the APIC base GPA.
- The top 10 commits fix buffer overflow (and potential TOC/TOU)
flaws in the page state change protocol for encrypted VMs. AI
models find it quite easily given it was reported three times, but
aren't as good at writing a comprehensive fix. There's more to
clean up in the area, which will come in 7.2"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (22 commits)
KVM: SEV: Use READ_ONCE() when reading entries/indices from PSC buffer
KVM: SEV: Check PSC request indices against the actual size of the buffer
KVM: SEV: Don't explicitly pass PSC buffer to snp_begin_psc()
KVM: SEV: WARN if KVM attempts to setup scratch area with min_len==0
KVM: SEV: Compute the correct max length of the in-GHCB scratch area
KVM: SEV: Use the size of the PSC header as the minimum size for PSC requests
KVM: SEV: Ignore Port I/O requests of length '0'
KVM: SEV: Reject MMIO requests larger than 8 bytes with GHCB v2+
KVM: SEV: Ignore MMIO requests of length '0'
KVM: SEV: Require in-GHCB scratch area if GHCB v2+ is in use
KVM: arm64: Correctly cap ZCR_EL2 provided by a guest hypervisor
KVM: arm64: Fix memory leak in hyp_trace_unload()
KVM: arm64: Fix rollback in hyp_trace_buffer_share_hyp()
KVM: arm64: Fix meta-page unsharing in pKVM hyp tracing
KVM: arm64: PMU: Preserve AArch32 counter low bits
KVM: SVM: Flush the current TLB when transitioning from xAVIC => x2AVIC
KVM: x86: Fix ERAPS RAP clear on INVPCID single-context invalidation
KVM: arm64: Fix CONFIG_PKVM_DISABLE_STAGE2_ON_PANIC
KVM: selftests: Guard execinfo.h inclusion for non-glibc builds
KVM: x86: Rate-limit global clock updates on vCPU load
...
Jason A. Donenfeld says:
====================
WireGuard fixes for 7.1-rc6
Please find one small patch, fixing the order of adding padding onto a
packet, to ensure padding bytes get zeroed properly.
====================
Link: https://patch.msgid.link/20260529173134.3080773-1-Jason@zx2c4.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
With how this is currently written, we add the trailer, zero it out, and
then add the header space on. If that header space requires a
reallocation + copy, the zeros in the trailer aren't copied, because the
skb len hasn't actually been yet expanded to cover that. Instead add the
padding at the end of the process rather than at the beginning.
Fixes: e7096c131e ("net: WireGuard secure network tunnel")
Cc: stable@vger.kernel.org
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Link: https://patch.msgid.link/20260529173134.3080773-2-Jason@zx2c4.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
