mirror of
https://github.com/torvalds/linux.git
synced 2026-07-31 03:27:03 +02:00
aaba3cd33f
1205954 Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
Benjamin Berg
|
aaba3cd33f |
wifi: mac80211: Create resources for disabled links
When associating to an MLD AP, links may be disabled. Create all
resources associated with a disabled link so that we can later enable it
without having to create these resources on the fly.
Fixes:
|
||
|
Benjamin Berg
|
334bf33eec |
wifi: cfg80211: avoid leaking stack data into trace
If the structure is not initialized then boolean types might be copied into the tracing data without being initialised. This causes data from the stack to leak into the trace and also triggers a UBSAN failure which can easily be avoided here. Signed-off-by: Benjamin Berg <benjamin.berg@intel.com> Link: https://lore.kernel.org/r/20230925171855.a9271ef53b05.I8180bae663984c91a3e036b87f36a640ba409817@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com> |
||
|
Wen Gong
|
61304336c6 |
wifi: mac80211: allow transmitting EAPOL frames with tainted key
Lower layer device driver stop/wake TX by calling ieee80211_stop_queue()/
ieee80211_wake_queue() while hw scan. Sometimes hw scan and PTK rekey are
running in parallel, when M4 sent from wpa_supplicant arrive while the TX
queue is stopped, then the M4 will pending send, and then new key install
from wpa_supplicant. After TX queue wake up by lower layer device driver,
the M4 will be dropped by below call stack.
When key install started, the current key flag is set KEY_FLAG_TAINTED in
ieee80211_pairwise_rekey(), and then mac80211 wait key install complete by
lower layer device driver. Meanwhile ieee80211_tx_h_select_key() will return
TX_DROP for the M4 in step 12 below, and then ieee80211_free_txskb() called
by ieee80211_tx_dequeue(), so the M4 will not send and free, then the rekey
process failed becaue AP not receive M4. Please see details in steps below.
There are a interval between KEY_FLAG_TAINTED set for current key flag and
install key complete by lower layer device driver, the KEY_FLAG_TAINTED is
set in this interval, all packet including M4 will be dropped in this
interval, the interval is step 8~13 as below.
issue steps:
TX thread install key thread
1. stop_queue -idle-
2. sending M4 -idle-
3. M4 pending -idle-
4. -idle- starting install key from wpa_supplicant
5. -idle- =>ieee80211_key_replace()
6. -idle- =>ieee80211_pairwise_rekey() and set
currently key->flags |= KEY_FLAG_TAINTED
7. -idle- =>ieee80211_key_enable_hw_accel()
8. -idle- =>drv_set_key() and waiting key install
complete from lower layer device driver
9. wake_queue -waiting state-
10. re-sending M4 -waiting state-
11. =>ieee80211_tx_h_select_key() -waiting state-
12. drop M4 by KEY_FLAG_TAINTED -waiting state-
13. -idle- install key complete with success/fail
success: clear flag KEY_FLAG_TAINTED
fail: start disconnect
Hence add check in step 11 above to allow the EAPOL send out in the
interval. If lower layer device driver use the old key/cipher to encrypt
the M4, then AP received/decrypt M4 correctly, after M4 send out, lower
layer device driver install the new key/cipher to hardware and return
success.
If lower layer device driver use new key/cipher to send the M4, then AP
will/should drop the M4, then it is same result with this issue, AP will/
should kick out station as well as this issue.
issue log:
kworker/u16:4-5238 [000] 6456.108926: stop_queue: phy1 queue:0, reason:0
wpa_supplicant-961 [003] 6456.119737: rdev_tx_control_port: wiphy_name=phy1 name=wlan0 ifindex=6 dest=ARRAY[9e, 05, 31, 20, 9b, d0] proto=36488 unencrypted=0
wpa_supplicant-961 [003] 6456.119839: rdev_return_int_cookie: phy1, returned 0, cookie: 504
wpa_supplicant-961 [003] 6456.120287: rdev_add_key: phy1, netdev:wlan0(6), key_index: 0, mode: 0, pairwise: true, mac addr: 9e:05:31:20:9b:d0
wpa_supplicant-961 [003] 6456.120453: drv_set_key: phy1 vif:wlan0(2) sta:9e:05:31:20:9b:d0 cipher:0xfac04, flags=0x9, keyidx=0, hw_key_idx=0
kworker/u16:9-3829 [001] 6456.168240: wake_queue: phy1 queue:0, reason:0
kworker/u16:9-3829 [001] 6456.168255: drv_wake_tx_queue: phy1 vif:wlan0(2) sta:9e:05:31:20:9b:d0 ac:0 tid:7
kworker/u16:9-3829 [001] 6456.168305: cfg80211_control_port_tx_status: wdev(1), cookie: 504, ack: false
wpa_supplicant-961 [003] 6459.167982: drv_return_int: phy1 - -110
issue call stack:
nl80211_frame_tx_status+0x230/0x340 [cfg80211]
cfg80211_control_port_tx_status+0x1c/0x28 [cfg80211]
ieee80211_report_used_skb+0x374/0x3e8 [mac80211]
ieee80211_free_txskb+0x24/0x40 [mac80211]
ieee80211_tx_dequeue+0x644/0x954 [mac80211]
ath10k_mac_tx_push_txq+0xac/0x238 [ath10k_core]
ath10k_mac_op_wake_tx_queue+0xac/0xe0 [ath10k_core]
drv_wake_tx_queue+0x80/0x168 [mac80211]
__ieee80211_wake_txqs+0xe8/0x1c8 [mac80211]
_ieee80211_wake_txqs+0xb4/0x120 [mac80211]
ieee80211_wake_txqs+0x48/0x80 [mac80211]
tasklet_action_common+0xa8/0x254
tasklet_action+0x2c/0x38
__do_softirq+0xdc/0x384
Signed-off-by: Wen Gong <quic_wgong@quicinc.com>
Link: https://lore.kernel.org/r/20230801064751.25803-1-quic_wgong@quicinc.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
||
|
Johannes Berg
|
084cf2aeca |
wifi: mac80211: work around Cisco AP 9115 VHT MPDU length
Cisco AP module 9115 with FW 17.3 has a bug and sends a too large maximum MPDU length in the association response (indicating 12k) that it cannot actually process. Work around that by taking the minimum between what's in the association response and the BSS elements (from beacon or probe response). Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Link: https://lore.kernel.org/r/20230918140607.d1966a9a532e.I090225babb7cd4d1081ee9acd40e7de7e41c15ae@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com> |
||
|
Ilan Peer
|
0914468adf |
wifi: cfg80211: Fix 6GHz scan configuration
When the scan request includes a non broadcast BSSID, when adding the scan parameters for 6GHz collocated scanning, do not include entries that do not match the given BSSID. Signed-off-by: Ilan Peer <ilan.peer@intel.com> Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Link: https://lore.kernel.org/r/20230918140607.6d31d2a96baf.I6c4e3e3075d1d1878ee41f45190fdc6b86f18708@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com> |
||
|
Johannes Berg
|
d097ae01eb |
wifi: mac80211: fix potential key leak
When returning from ieee80211_key_link(), the key needs to have been freed or successfully installed. This was missed in a number of error paths, fix it. Signed-off-by: Johannes Berg <johannes.berg@intel.com> |
||
|
Johannes Berg
|
31db78a492 |
wifi: mac80211: fix potential key use-after-free
When ieee80211_key_link() is called by ieee80211_gtk_rekey_add()
but returns 0 due to KRACK protection (identical key reinstall),
ieee80211_gtk_rekey_add() will still return a pointer into the
key, in a potential use-after-free. This normally doesn't happen
since it's only called by iwlwifi in case of WoWLAN rekey offload
which has its own KRACK protection, but still better to fix, do
that by returning an error code and converting that to success on
the cfg80211 boundary only, leaving the error for bad callers of
ieee80211_gtk_rekey_add().
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Fixes:
|
||
|
Felix Fietkau
|
684e45e120 |
wifi: mt76: mt76x02: fix MT76x0 external LNA gain handling
On MT76x0, LNA gain should be applied for both external and internal LNA.
On MT76x2, LNA gain should be treated as 0 for external LNA.
Move the LNA type based logic to mt76x2 in order to fix mt76x0.
Fixes:
|
||
|
Juerg Haefliger
|
4fed494abc |
wifi: brcmfmac: Replace 1-element arrays with flexible arrays
Since commit
|
||
|
Pin-yen Lin
|
aef7a03000 |
wifi: mwifiex: Fix oob check condition in mwifiex_process_rx_packet
Only skip the code path trying to access the rfc1042 headers when the
buffer is too small, so the driver can still process packets without
rfc1042 headers.
Fixes:
|
||
|
Sascha Hauer
|
2e1b3ae3e1 |
wifi: rtw88: rtw8723d: Fix MAC address offset in EEPROM
The MAC address is stored at offset 0x107 in the EEPROM, like correctly
stated in the comment. Add a two bytes reserved field right before the
MAC address to shift it from offset 0x105 to 0x107.
With this the MAC address returned from my RTL8723du wifi stick can be
correctly decoded as "Shenzhen Four Seas Global Link Network Technology
Co., Ltd."
Fixes:
|
||
|
Johannes Berg
|
2c3dfba4cf |
rfkill: sync before userspace visibility/changes
If userspace quickly opens /dev/rfkill after a new instance was created, it might see the old state of the instance from before the sync work runs and may even _change_ the state, only to have the sync work change it again. Fix this by doing the sync inline where needed, not just for /dev/rfkill but also for sysfs. Signed-off-by: Johannes Berg <johannes.berg@intel.com> |
||
|
Felix Fietkau
|
6e48ebffc2 |
wifi: mac80211: fix mesh id corruption on 32 bit systems
Since the changed field size was increased to u64, mesh_bss_info_changed
pulls invalid bits from the first 3 bytes of the mesh id, clears them, and
passes them on to ieee80211_link_info_change_notify, because
ifmsh->mbss_changed was not updated to match its size.
Fix this by turning into ifmsh->mbss_changed into an unsigned long array with
64 bit size.
Fixes:
|
||
|
Johannes Berg
|
d1383077c2 |
wifi: cfg80211: add missing kernel-doc for cqm_rssi_work
As reported by Stephen, I neglected to add the kernel-doc
for the new struct member. Fix that.
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Fixes:
|
||
|
Johannes Berg
|
37c20b2eff |
wifi: cfg80211: fix cqm_config access race
Max Schulze reports crashes with brcmfmac. The reason seems
to be a race between userspace removing the CQM config and
the driver calling cfg80211_cqm_rssi_notify(), where if the
data is freed while cfg80211_cqm_rssi_notify() runs it will
crash since it assumes wdev->cqm_config is set. This can't
be fixed with a simple non-NULL check since there's nothing
we can do for locking easily, so use RCU instead to protect
the pointer, but that requires pulling the updates out into
an asynchronous worker so they can sleep and call back into
the driver.
Since we need to change the free anyway, also change it to
go back to the old settings if changing the settings fails.
Reported-and-tested-by: Max Schulze <max.schulze@online.de>
Closes: https://lore.kernel.org/r/ac96309a-8d8d-4435-36e6-6d152eb31876@online.de
Fixes:
|
||
|
Christophe JAILLET
|
8ba438ef3c |
wifi: iwlwifi: mvm: Fix a memory corruption issue
A few lines above, space is kzalloc()'ed for:
sizeof(struct iwl_nvm_data) +
sizeof(struct ieee80211_channel) +
sizeof(struct ieee80211_rate)
'mvm->nvm_data' is a 'struct iwl_nvm_data', so it is fine.
At the end of this structure, there is the 'channels' flex array.
Each element is of type 'struct ieee80211_channel'.
So only 1 element is allocated in this array.
When doing:
mvm->nvm_data->bands[0].channels = mvm->nvm_data->channels;
We point at the first element of the 'channels' flex array.
So this is fine.
However, when doing:
mvm->nvm_data->bands[0].bitrates =
(void *)((u8 *)mvm->nvm_data->channels + 1);
because of the "(u8 *)" cast, we add only 1 to the address of the beginning
of the flex array.
It is likely that we want point at the 'struct ieee80211_rate' allocated
just after.
Remove the spurious casting so that the pointer arithmetic works as
expected.
Fixes:
|
||
|
Ben Greear
|
e8fbe99e87 |
wifi: iwlwifi: Ensure ack flag is properly cleared.
Debugging indicates that nothing else is clearing the info->flags, so some frames were flagged as ACKed when they should not be. Explicitly clear the ack flag to ensure this does not happen. Signed-off-by: Ben Greear <greearb@candelatech.com> Acked-by: Gregory Greenman <gregory.greenman@intel.com> Link: https://lore.kernel.org/r/20230808205605.4105670-1-greearb@candelatech.com Signed-off-by: Johannes Berg <johannes.berg@intel.com> |
||
|
Arnd Bergmann
|
424c82e8ad |
wifi: iwlwifi: dbg_ini: fix structure packing
The iwl_fw_ini_error_dump_range structure has conflicting alignment
requirements for the inner union and the outer struct:
In file included from drivers/net/wireless/intel/iwlwifi/fw/dbg.c:9:
drivers/net/wireless/intel/iwlwifi/fw/error-dump.h:312:2: error: field within 'struct iwl_fw_ini_error_dump_range' is less aligned than 'union iwl_fw_ini_error_dump_range::(anonymous at drivers/net/wireless/intel/iwlwifi/fw/error-dump.h:312:2)' and is usually due to 'struct iwl_fw_ini_error_dump_range' being packed, which can lead to unaligned accesses [-Werror,-Wunaligned-access]
union {
As the original intention was apparently to make the entire structure
unaligned, mark the innermost members the same way so the union
becomes packed as well.
Fixes:
|
||
|
Gregory Greenman
|
2d4caa1dbe |
iwlwifi: mvm: handle PS changes in vif_cfg_changed
Handling of BSS_CHANGED_PS was missing in vif_cfg_changed
callback. Fix it.
Fixes:
|
||
|
Aditya Kumar Singh
|
5112fa5027 |
wifi: cfg80211: validate AP phy operation before starting it
Many regulatories can have HE/EHT Operation as not permitted. In such cases, AP should not be allowed to start if it is using a channel having the no operation flag set. However, currently there is no such check in place. Fix this issue by validating such IEs sent during start AP against the channel flags. Signed-off-by: Aditya Kumar Singh <quic_adisi@quicinc.com> Reviewed-by: Jeff Johnson <quic_jjohnson@quicinc.com> Link: https://lore.kernel.org/r/20230905064857.1503-1-quic_adisi@quicinc.com Signed-off-by: Johannes Berg <johannes.berg@intel.com> |
||
|
Wen Gong
|
234249d88b |
wifi: cfg80211/mac80211: hold link BSSes when assoc fails for MLO connection
When connect to MLO AP with more than one link, and the assoc response of
AP is not success, then cfg80211_unhold_bss() is not called for all the
links' cfg80211_bss except the primary link which means the link used by
the latest successful association request. Thus the hold value of the
cfg80211_bss is not reset to 0 after the assoc fail, and then the
__cfg80211_unlink_bss() will not be called for the cfg80211_bss by
__cfg80211_bss_expire().
Then the AP always looks exist even the AP is shutdown or reconfigured
to another type, then it will lead error while connecting it again.
The detail info are as below.
When connect with muti-links AP, cfg80211_hold_bss() is called by
cfg80211_mlme_assoc() for each cfg80211_bss of all the links. When
assoc response from AP is not success(such as status_code==1), the
ieee80211_link_data of non-primary link(sdata->link[link_id]) is NULL
because ieee80211_assoc_success()->ieee80211_vif_update_links() is
not called for the links.
Then struct cfg80211_rx_assoc_resp resp in cfg80211_rx_assoc_resp() and
struct cfg80211_connect_resp_params cr in __cfg80211_connect_result()
will only have the data of the primary link, and finally function
cfg80211_connect_result_release_bsses() only call cfg80211_unhold_bss()
for the primary link. Then cfg80211_bss of the other links will never free
because its hold is always > 0 now.
Hence assign value for the bss and status from assoc_data since it is
valid for this case. Also assign value of addr from assoc_data when the
link is NULL because the addrs of assoc_data and link both represent the
local link addr and they are same value for success connection.
Fixes:
|
||
|
Gustavo A. R. Silva
|
d5a93b7d28 |
wifi: mwifiex: Sanity check tlv_len and tlv_bitmap_len
Add sanity checks for both `tlv_len` and `tlv_bitmap_len` before decoding data from `event_buf`. This prevents any malicious or buggy firmware from overflowing `event_buf` through large values for `tlv_len` and `tlv_bitmap_len`. Suggested-by: Dan Williams <dcbw@redhat.com> Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org> Reviewed-by: Kees Cook <keescook@chromium.org> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/d4f8780527d551552ee96f17a0229e02e1c200d1.1692931954.git.gustavoars@kernel.org |
||
|
Gustavo A. R. Silva
|
c7847241de |
wifi: mwifiex: Replace one-element array with flexible-array member in struct mwifiex_ie_types_rxba_sync
One-element and zero-length arrays are deprecated. So, replace one-element array in struct mwifiex_ie_types_rxba_sync with flexible-array member, and refactor the rest of the code, accordingly. This results in no differences in binary output. Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org> Reviewed-by: Kees Cook <keescook@chromium.org> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/79c801c69c8beece2f80502c60166036d3c047cc.1692931954.git.gustavoars@kernel.org |
||
|
Gustavo A. R. Silva
|
eec679e4ac |
wifi: mwifiex: Fix tlv_buf_left calculation
In a TLV encoding scheme, the Length part represents the length after
the header containing the values for type and length. In this case,
`tlv_len` should be:
tlv_len == (sizeof(*tlv_rxba) - 1) - sizeof(tlv_rxba->header) + tlv_bitmap_len
Notice that the `- 1` accounts for the one-element array `bitmap`, which
1-byte size is already included in `sizeof(*tlv_rxba)`.
So, if the above is correct, there is a double-counting of some members
in `struct mwifiex_ie_types_rxba_sync`, when `tlv_buf_left` and `tmp`
are calculated:
968 tlv_buf_left -= (sizeof(*tlv_rxba) + tlv_len);
969 tmp = (u8 *)tlv_rxba + tlv_len + sizeof(*tlv_rxba);
in specific, members:
drivers/net/wireless/marvell/mwifiex/fw.h:777
777 u8 mac[ETH_ALEN];
778 u8 tid;
779 u8 reserved;
780 __le16 seq_num;
781 __le16 bitmap_len;
This is clearly wrong, and affects the subsequent decoding of data in
`event_buf` through `tlv_rxba`:
970 tlv_rxba = (struct mwifiex_ie_types_rxba_sync *)tmp;
Fix this by using `sizeof(tlv_rxba->header)` instead of `sizeof(*tlv_rxba)`
in the calculation of `tlv_buf_left` and `tmp`.
This results in the following binary differences before/after changes:
| drivers/net/wireless/marvell/mwifiex/11n_rxreorder.o
| @@ -4698,11 +4698,11 @@
| drivers/net/wireless/marvell/mwifiex/11n_rxreorder.c:968
| tlv_buf_left -= (sizeof(tlv_rxba->header) + tlv_len);
| - 1da7: lea -0x11(%rbx),%edx
| + 1da7: lea -0x4(%rbx),%edx
| 1daa: movzwl %bp,%eax
| drivers/net/wireless/marvell/mwifiex/11n_rxreorder.c:969
| tmp = (u8 *)tlv_rxba + sizeof(tlv_rxba->header) + tlv_len;
| - 1dad: lea 0x11(%r15,%rbp,1),%r15
| + 1dad: lea 0x4(%r15,%rbp,1),%r15
The above reflects the desired change: avoid counting 13 too many bytes;
which is the total size of the double-counted members in
`struct mwifiex_ie_types_rxba_sync`:
$ pahole -C mwifiex_ie_types_rxba_sync drivers/net/wireless/marvell/mwifiex/11n_rxreorder.o
struct mwifiex_ie_types_rxba_sync {
struct mwifiex_ie_types_header header; /* 0 4 */
|-----------------------------------------------------------------------
| u8 mac[6]; /* 4 6 */ |
| u8 tid; /* 10 1 */ |
| u8 reserved; /* 11 1 */ |
| __le16 seq_num; /* 12 2 */ |
| __le16 bitmap_len; /* 14 2 */ |
| u8 bitmap[1]; /* 16 1 */ |
|----------------------------------------------------------------------|
| 13 bytes|
-----------
/* size: 17, cachelines: 1, members: 7 */
/* last cacheline: 17 bytes */
} __attribute__((__packed__));
Fixes:
|
||
|
Jeff Johnson
|
af5ff4b789 |
MAINTAINERS: wifi: ath12k: add wiki link
The ath12k wireless driver now has a wiki, so advertise it. Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20230829-ath12kwiki-v1-1-df37127527a1@quicinc.com |
||
|
Kalle Valo
|
d253fb3705 |
MAINTAINERS: wifi: hostap: remove maintainer and web page
As hostap is marked as obsolete there's no need to have a maintainer. Also remove the link to the web page. Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20230828123603.87621-5-kvalo@kernel.org |
||
|
Kalle Valo
|
b8c713c134 |
MAINTAINERS: wifi: wl12xx: remove git tree
Luca's tree hasn't been used for 10 years so remove it. Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20230828123603.87621-4-kvalo@kernel.org |
||
|
Kalle Valo
|
42c5f0e20e |
MAINTAINERS: wifi: rtl8xxxu: remove git tree
Jes' tree hasn't been used for six years so remove it. Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20230828123603.87621-3-kvalo@kernel.org |
||
|
Kalle Valo
|
0b9480da79 |
MAINTAINERS: wifi: rtlwifi: remove git tree
Linville's tree hasn't been used for something like 10 years so remove it. Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20230828123603.87621-2-kvalo@kernel.org |
||
|
Kalle Valo
|
84727c5727 |
MAINTAINERS: wifi: remove generic wiki links from drivers
The top level entry for wireless drivers already contains to the wiki so no need to duplicate that in driver entries: NETWORKING DRIVERS (WIRELESS) [...] W: https://wireless.wiki.kernel.org/ Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20230828123603.87621-1-kvalo@kernel.org |
||
|
Lorenzo Bianconi
|
195273147e |
wifi: mt76: fix lock dependency problem for wed_lock
Fix the following kernel depency lock holding wed_lock with BH disabled.
[ 40.579696] mt798x-wmac 18000000.wifi: attaching wed device 0 version 2
[ 40.604648] platform 15010000.wed: MTK WED WO Firmware Version: DEV_000000, Build Time: 20221208202138
[ 40.613972] platform 15010000.wed: MTK WED WO Chip ID 00 Region 3
[ 40.943617]
[ 40.945118] ========================================================
[ 40.951457] WARNING: possible irq lock inversion dependency detected
[ 40.957797] 5.15.127 #0 Not tainted
[ 40.961276] --------------------------------------------------------
[ 40.967614] insmod/2329 just changed the state of lock:
[ 40.972827] ffffff8004003b08 (&dev->wed_lock){+.+.}-{2:2}, at: mt76_get_rxwi+0x1c/0xac [mt76]
[ 40.981387] but this lock was taken by another, SOFTIRQ-safe lock in the past:
[ 40.988592] (&q->lock){+.-.}-{2:2}
[ 40.988602]
[ 40.988602]
[ 40.988602] and interrupts could create inverse lock ordering between them.
[ 40.988602]
[ 41.003445]
[ 41.003445] other info that might help us debug this:
[ 41.009957] Possible interrupt unsafe locking scenario:
[ 41.009957]
[ 41.016729] CPU0 CPU1
[ 41.021245] ---- ----
[ 41.025761] lock(&dev->wed_lock);
[ 41.029241] local_irq_disable();
[ 41.035145] lock(&q->lock);
[ 41.040620] lock(&dev->wed_lock);
[ 41.046616] <Interrupt>
[ 41.049223] lock(&q->lock);
[ 41.052356]
[ 41.052356] *** DEADLOCK ***
[ 41.052356]
[ 41.058260] 1 lock held by insmod/2329:
[ 41.062085] #0: ffffff80003b9988 (&dev->mutex){....}-{3:3}, at: __driver_attach+0x88/0x190
[ 41.070442]
[ 41.070442] the shortest dependencies between 2nd lock and 1st lock:
[ 41.078257] -> (&q->lock){+.-.}-{2:2} {
[ 41.082177] HARDIRQ-ON-W at:
[ 41.085396] lock_acquire+0xfc/0x2c0
[ 41.090787] _raw_spin_lock_bh+0x84/0xa0
[ 41.096525] mt76_dma_cleanup+0x24c/0x650 [mt76]
[ 41.102977] mt76_dma_cleanup+0x614/0x650 [mt76]
[ 41.109428] mt7915_eeprom_get_power_delta+0x1168/0x2464 [mt7915e]
[ 41.117435] mt7915_eeprom_init+0x40/0x340 [mt7915e]
[ 41.124222] cleanup_module+0x94/0xb28 [mt7915e]
[ 41.130662] platform_probe+0x64/0xbc
[ 41.136139] really_probe.part.0+0x98/0x2f4
[ 41.142134] __driver_probe_device+0x94/0x16c
[ 41.148303] driver_probe_device+0x40/0x120
[ 41.154299] __driver_attach+0x94/0x190
[ 41.159947] bus_for_each_dev+0x5c/0x94
[ 41.165594] driver_attach+0x20/0x30
[ 41.170983] bus_add_driver+0x104/0x1f4
[ 41.176631] driver_register+0x74/0x120
[ 41.182280] __platform_driver_register+0x24/0x30
[ 41.188797] 0xffffffc000cb1074
[ 41.193754] do_one_initcall+0x70/0x2cc
[ 41.199403] do_init_module+0x44/0x240
[ 41.204968] load_module+0x1f5c/0x2874
[ 41.210532] __do_sys_init_module+0x1d8/0x2ac
[ 41.216702] __arm64_sys_init_module+0x18/0x20
[ 41.222958] invoke_syscall.constprop.0+0x4c/0xe0
[ 41.229474] do_el0_svc+0x50/0xf0
[ 41.234602] el0_svc+0x4c/0xcc
[ 41.239471] el0t_64_sync_handler+0xe0/0x110
[ 41.245556] el0t_64_sync+0x15c/0x160
[ 41.251029] IN-SOFTIRQ-W at:
[ 41.254249] lock_acquire+0xfc/0x2c0
[ 41.259638] _raw_spin_lock_bh+0x84/0xa0
[ 41.265372] mt76_queue_tx_complete+0x34/0x70 [mt76]
[ 41.272170] mt76_free_pending_rxwi+0x36c/0x5d0 [mt76]
[ 41.279140] mt76_free_pending_rxwi+0x5c0/0x5d0 [mt76]
[ 41.286111] mt7915_eeprom_get_power_delta+0x620/0x2464 [mt7915e]
[ 41.294026] __napi_poll.constprop.0+0x5c/0x230
[ 41.300372] net_rx_action+0xe4/0x294
[ 41.305847] _stext+0x154/0x4cc
[ 41.310801] do_softirq+0xa4/0xbc
[ 41.315930] __local_bh_enable_ip+0x168/0x174
[ 41.322097] napi_threaded_poll+0xbc/0x140
[ 41.328007] kthread+0x13c/0x150
[ 41.333049] ret_from_fork+0x10/0x20
[ 41.338437] INITIAL USE at:
[ 41.341568] lock_acquire+0xfc/0x2c0
[ 41.346869] _raw_spin_lock_bh+0x84/0xa0
[ 41.352519] mt76_dma_cleanup+0x24c/0x650 [mt76]
[ 41.358882] mt76_dma_cleanup+0x614/0x650 [mt76]
[ 41.365245] mt7915_eeprom_get_power_delta+0x1168/0x2464 [mt7915e]
[ 41.373160] mt7915_eeprom_init+0x40/0x340 [mt7915e]
[ 41.379860] cleanup_module+0x94/0xb28 [mt7915e]
[ 41.386213] platform_probe+0x64/0xbc
[ 41.391602] really_probe.part.0+0x98/0x2f4
[ 41.397511] __driver_probe_device+0x94/0x16c
[ 41.403594] driver_probe_device+0x40/0x120
[ 41.409502] __driver_attach+0x94/0x190
[ 41.415063] bus_for_each_dev+0x5c/0x94
[ 41.420625] driver_attach+0x20/0x30
[ 41.425926] bus_add_driver+0x104/0x1f4
[ 41.431487] driver_register+0x74/0x120
[ 41.437049] __platform_driver_register+0x24/0x30
[ 41.443479] 0xffffffc000cb1074
[ 41.448346] do_one_initcall+0x70/0x2cc
[ 41.453907] do_init_module+0x44/0x240
[ 41.459383] load_module+0x1f5c/0x2874
[ 41.464860] __do_sys_init_module+0x1d8/0x2ac
[ 41.470944] __arm64_sys_init_module+0x18/0x20
[ 41.477113] invoke_syscall.constprop.0+0x4c/0xe0
[ 41.483542] do_el0_svc+0x50/0xf0
[ 41.488582] el0_svc+0x4c/0xcc
[ 41.493364] el0t_64_sync_handler+0xe0/0x110
[ 41.499361] el0t_64_sync+0x15c/0x160
[ 41.504748] }
[ 41.506489] ... key at: [<ffffffc000c65ba0>] __this_module+0x3e0/0xffffffffffffa840 [mt76]
[ 41.515371] ... acquired at:
[ 41.518413] _raw_spin_lock+0x60/0x74
[ 41.522240] mt76_get_rxwi+0x1c/0xac [mt76]
[ 41.526608] mt76_dma_cleanup+0x3e0/0x650 [mt76]
[ 41.531410] mt76_dma_cleanup+0x614/0x650 [mt76]
[ 41.536211] mt7915_dma_init+0x408/0x7b0 [mt7915e]
[ 41.541177] mt7915_register_device+0x310/0x620 [mt7915e]
[ 41.546749] mt7915_mmio_probe+0xcec/0x1d44 [mt7915e]
[ 41.551973] platform_probe+0x64/0xbc
[ 41.555802] really_probe.part.0+0x98/0x2f4
[ 41.560149] __driver_probe_device+0x94/0x16c
[ 41.564670] driver_probe_device+0x40/0x120
[ 41.569017] __driver_attach+0x94/0x190
[ 41.573019] bus_for_each_dev+0x5c/0x94
[ 41.577018] driver_attach+0x20/0x30
[ 41.580758] bus_add_driver+0x104/0x1f4
[ 41.584758] driver_register+0x74/0x120
[ 41.588759] __platform_driver_register+0x24/0x30
[ 41.593628] init_module+0x74/0x1000 [mt7915e]
[ 41.598248] do_one_initcall+0x70/0x2cc
[ 41.602248] do_init_module+0x44/0x240
[ 41.606162] load_module+0x1f5c/0x2874
[ 41.610078] __do_sys_init_module+0x1d8/0x2ac
[ 41.614600] __arm64_sys_init_module+0x18/0x20
[ 41.619209] invoke_syscall.constprop.0+0x4c/0xe0
[ 41.624076] do_el0_svc+0x50/0xf0
[ 41.627555] el0_svc+0x4c/0xcc
[ 41.630776] el0t_64_sync_handler+0xe0/0x110
[ 41.635211] el0t_64_sync+0x15c/0x160
[ 41.639037]
[ 41.640517] -> (&dev->wed_lock){+.+.}-{2:2} {
[ 41.644872] HARDIRQ-ON-W at:
[ 41.648003] lock_acquire+0xfc/0x2c0
[ 41.653219] _raw_spin_lock+0x60/0x74
[ 41.658520] mt76_free_pending_rxwi+0xc0/0x5d0 [mt76]
[ 41.665232] mt76_dma_cleanup+0x1dc/0x650 [mt76]
[ 41.671508] mt7915_eeprom_get_power_delta+0x1830/0x2464 [mt7915e]
[ 41.679336] mt7915_unregister_device+0x5b4/0x910 [mt7915e]
[ 41.686555] mt7915_eeprom_get_target_power+0xb8/0x230 [mt7915e]
[ 41.694209] mt7986_wmac_enable+0xc30/0xcd0 [mt7915e]
[ 41.700909] platform_remove+0x4c/0x64
[ 41.706298] __device_release_driver+0x194/0x240
[ 41.712554] driver_detach+0xc0/0x100
[ 41.717857] bus_remove_driver+0x54/0xac
[ 41.723418] driver_unregister+0x2c/0x54
[ 41.728980] platform_driver_unregister+0x10/0x20
[ 41.735323] mt7915_ops+0x244/0xffffffffffffed58 [mt7915e]
[ 41.742457] __arm64_sys_delete_module+0x170/0x23c
[ 41.748887] invoke_syscall.constprop.0+0x4c/0xe0
[ 41.755229] do_el0_svc+0x50/0xf0
[ 41.760183] el0_svc+0x4c/0xcc
[ 41.764878] el0t_64_sync_handler+0xe0/0x110
[ 41.770788] el0t_64_sync+0x15c/0x160
[ 41.776088] SOFTIRQ-ON-W at:
[ 41.779220] lock_acquire+0xfc/0x2c0
[ 41.784435] _raw_spin_lock+0x60/0x74
[ 41.789737] mt76_get_rxwi+0x1c/0xac [mt76]
[ 41.795580] mt7915_debugfs_rx_log+0x804/0xb74 [mt7915e]
[ 41.802540] mtk_wed_start+0x970/0xaa0
[ 41.807929] mt7915_dma_start+0x26c/0x630 [mt7915e]
[ 41.814455] mt7915_dma_start+0x5a4/0x630 [mt7915e]
[ 41.820981] mt7915_dma_init+0x45c/0x7b0 [mt7915e]
[ 41.827420] mt7915_register_device+0x310/0x620 [mt7915e]
[ 41.834467] mt7915_mmio_probe+0xcec/0x1d44 [mt7915e]
[ 41.841167] platform_probe+0x64/0xbc
[ 41.846469] really_probe.part.0+0x98/0x2f4
[ 41.852291] __driver_probe_device+0x94/0x16c
[ 41.858286] driver_probe_device+0x40/0x120
[ 41.864107] __driver_attach+0x94/0x190
[ 41.869582] bus_for_each_dev+0x5c/0x94
[ 41.875056] driver_attach+0x20/0x30
[ 41.880270] bus_add_driver+0x104/0x1f4
[ 41.885745] driver_register+0x74/0x120
[ 41.891221] __platform_driver_register+0x24/0x30
[ 41.897564] init_module+0x74/0x1000 [mt7915e]
[ 41.903657] do_one_initcall+0x70/0x2cc
[ 41.909130] do_init_module+0x44/0x240
[ 41.914520] load_module+0x1f5c/0x2874
[ 41.919909] __do_sys_init_module+0x1d8/0x2ac
[ 41.925905] __arm64_sys_init_module+0x18/0x20
[ 41.931989] invoke_syscall.constprop.0+0x4c/0xe0
[ 41.938331] do_el0_svc+0x50/0xf0
[ 41.943285] el0_svc+0x4c/0xcc
[ 41.947981] el0t_64_sync_handler+0xe0/0x110
[ 41.953892] el0t_64_sync+0x15c/0x160
[ 41.959192] INITIAL USE at:
[ 41.962238] lock_acquire+0xfc/0x2c0
[ 41.967365] _raw_spin_lock+0x60/0x74
[ 41.972580] mt76_free_pending_rxwi+0xc0/0x5d0 [mt76]
[ 41.979206] mt76_dma_cleanup+0x1dc/0x650 [mt76]
[ 41.985395] mt7915_eeprom_get_power_delta+0x1830/0x2464 [mt7915e]
[ 41.993137] mt7915_unregister_device+0x5b4/0x910 [mt7915e]
[ 42.000270] mt7915_eeprom_get_target_power+0xb8/0x230 [mt7915e]
[ 42.007837] mt7986_wmac_enable+0xc30/0xcd0 [mt7915e]
[ 42.014450] platform_remove+0x4c/0x64
[ 42.019753] __device_release_driver+0x194/0x240
[ 42.025922] driver_detach+0xc0/0x100
[ 42.031137] bus_remove_driver+0x54/0xac
[ 42.036612] driver_unregister+0x2c/0x54
[ 42.042087] platform_driver_unregister+0x10/0x20
[ 42.048344] mt7915_ops+0x244/0xffffffffffffed58 [mt7915e]
[ 42.055391] __arm64_sys_delete_module+0x170/0x23c
[ 42.061735] invoke_syscall.constprop.0+0x4c/0xe0
[ 42.067990] do_el0_svc+0x50/0xf0
[ 42.072857] el0_svc+0x4c/0xcc
[ 42.077466] el0t_64_sync_handler+0xe0/0x110
[ 42.083289] el0t_64_sync+0x15c/0x160
[ 42.088503] }
[ 42.090157] ... key at: [<ffffffc000c65c10>] __this_module+0x450/0xffffffffffffa840 [mt76]
[ 42.098951] ... acquired at:
[ 42.101907] __lock_acquire+0x718/0x1df0
[ 42.105994] lock_acquire+0xfc/0x2c0
[ 42.109734] _raw_spin_lock+0x60/0x74
[ 42.113561] mt76_get_rxwi+0x1c/0xac [mt76]
[ 42.117929] mt7915_debugfs_rx_log+0x804/0xb74 [mt7915e]
[ 42.123415] mtk_wed_start+0x970/0xaa0
[ 42.127328] mt7915_dma_start+0x26c/0x630 [mt7915e]
[ 42.132379] mt7915_dma_start+0x5a4/0x630 [mt7915e]
[ 42.137430] mt7915_dma_init+0x45c/0x7b0 [mt7915e]
[ 42.142395] mt7915_register_device+0x310/0x620 [mt7915e]
[ 42.147967] mt7915_mmio_probe+0xcec/0x1d44 [mt7915e]
[ 42.153192] platform_probe+0x64/0xbc
[ 42.157019] really_probe.part.0+0x98/0x2f4
[ 42.161367] __driver_probe_device+0x94/0x16c
[ 42.165887] driver_probe_device+0x40/0x120
[ 42.170234] __driver_attach+0x94/0x190
[ 42.174235] bus_for_each_dev+0x5c/0x94
[ 42.178235] driver_attach+0x20/0x30
[ 42.181974] bus_add_driver+0x104/0x1f4
[ 42.185974] driver_register+0x74/0x120
[ 42.189974] __platform_driver_register+0x24/0x30
[ 42.194842] init_module+0x74/0x1000 [mt7915e]
[ 42.199460] do_one_initcall+0x70/0x2cc
[ 42.203460] do_init_module+0x44/0x240
[ 42.207376] load_module+0x1f5c/0x2874
[ 42.211290] __do_sys_init_module+0x1d8/0x2ac
[ 42.215813] __arm64_sys_init_module+0x18/0x20
[ 42.220421] invoke_syscall.constprop.0+0x4c/0xe0
[ 42.225288] do_el0_svc+0x50/0xf0
[ 42.228768] el0_svc+0x4c/0xcc
[ 42.231989] el0t_64_sync_handler+0xe0/0x110
[ 42.236424] el0t_64_sync+0x15c/0x160
[ 42.240249]
[ 42.241730]
[ 42.241730] stack backtrace:
[ 42.246074] CPU: 1 PID: 2329 Comm: insmod Not tainted 5.15.127 #0
[ 42.252157] Hardware name: GainStrong Oolite-MT7981B V1 Dev Board (NAND boot) (DT)
[ 42.259712] Call trace:
[ 42.262147] dump_backtrace+0x0/0x174
[ 42.265802] show_stack+0x14/0x20
[ 42.269108] dump_stack_lvl+0x84/0xac
[ 42.272761] dump_stack+0x14/0x2c
[ 42.276066] print_irq_inversion_bug.part.0+0x1b0/0x1c4
[ 42.281285] mark_lock+0x8b8/0x8bc
[ 42.284678] __lock_acquire+0x718/0x1df0
[ 42.288592] lock_acquire+0xfc/0x2c0
[ 42.292158] _raw_spin_lock+0x60/0x74
[ 42.295811] mt76_get_rxwi+0x1c/0xac [mt76]
[ 42.300008] mt7915_debugfs_rx_log+0x804/0xb74 [mt7915e]
[ 42.305320] mtk_wed_start+0x970/0xaa0
[ 42.309059] mt7915_dma_start+0x26c/0x630 [mt7915e]
[ 42.313937] mt7915_dma_start+0x5a4/0x630 [mt7915e]
[ 42.318815] mt7915_dma_init+0x45c/0x7b0 [mt7915e]
[ 42.323606] mt7915_register_device+0x310/0x620 [mt7915e]
[ 42.329005] mt7915_mmio_probe+0xcec/0x1d44 [mt7915e]
[ 42.334056] platform_probe+0x64/0xbc
[ 42.337711] really_probe.part.0+0x98/0x2f4
[ 42.341885] __driver_probe_device+0x94/0x16c
[ 42.346232] driver_probe_device+0x40/0x120
[ 42.350407] __driver_attach+0x94/0x190
[ 42.354234] bus_for_each_dev+0x5c/0x94
[ 42.358061] driver_attach+0x20/0x30
[ 42.361627] bus_add_driver+0x104/0x1f4
[ 42.365454] driver_register+0x74/0x120
[ 42.369282] __platform_driver_register+0x24/0x30
[ 42.373977] init_module+0x74/0x1000 [mt7915e]
[ 42.378423] do_one_initcall+0x70/0x2cc
[ 42.382249] do_init_module+0x44/0x240
[ 42.385990] load_module+0x1f5c/0x2874
[ 42.389733] __do_sys_init_module+0x1d8/0x2ac
[ 42.394082] __arm64_sys_init_module+0x18/0x20
[ 42.398518] invoke_syscall.constprop.0+0x4c/0xe0
[ 42.403211] do_el0_svc+0x50/0xf0
[ 42.406517] el0_svc+0x4c/0xcc
[ 42.409565] el0t_64_sync_handler+0xe0/0x110
[ 42.413827] el0t_64_sync+0x15c/0x160
[ 42.674858] mt798x-wmac 18000000.wifi: HW/SW Version: 0x8a108a10, Build Time: 20221208201745a
[ 42.674858]
[ 42.692078] mt798x-wmac 18000000.wifi: WM Firmware Version: ____000000, Build Time: 20221208201806
[ 42.735606] mt798x-wmac 18000000.wifi: WA Firmware Version: DEV_000000, Build Time: 20221208202048
Tested-by: Daniel Golle <daniel@makrotopia.org>
Fixes:
|
||
|
Linus Torvalds
|
bd6c11bc43 |
Networking changes for 6.6.
Core
----
- Increase size limits for to-be-sent skb frag allocations. This
allows tun, tap devices and packet sockets to better cope with large
writes operations.
- Store netdevs in an xarray, to simplify iterating over netdevs.
- Refactor nexthop selection for multipath routes.
- Improve sched class lifetime handling.
- Add backup nexthop ID support for bridge.
- Implement drop reasons support in openvswitch.
- Several data races annotations and fixes.
- Constify the sk parameter of routing functions.
- Prepend kernel version to netconsole message.
Protocols
---------
- Implement support for TCP probing the peer being under memory
pressure.
- Remove hard coded limitation on IPv6 specific info placement
inside the socket struct.
- Get rid of sysctl_tcp_adv_win_scale and use an auto-estimated
per socket scaling factor.
- Scaling-up the IPv6 expired route GC via a separated list of
expiring routes.
- In-kernel support for the TLS alert protocol.
- Better support for UDP reuseport with connected sockets.
- Add NEXT-C-SID support for SRv6 End.X behavior, reducing the SR
header size.
- Get rid of additional ancillary per MPTCP connection struct socket.
- Implement support for BPF-based MPTCP packet schedulers.
- Format MPTCP subtests selftests results in TAP.
- Several new SMC 2.1 features including unique experimental options,
max connections per lgr negotiation, max links per lgr negotiation.
BPF
---
- Multi-buffer support in AF_XDP.
- Add multi uprobe BPF links for attaching multiple uprobes
and usdt probes, which is significantly faster and saves extra fds.
- Implement an fd-based tc BPF attach API (TCX) and BPF link support on
top of it.
- Add SO_REUSEPORT support for TC bpf_sk_assign.
- Support new instructions from cpu v4 to simplify the generated code and
feature completeness, for x86, arm64, riscv64.
- Support defragmenting IPv(4|6) packets in BPF.
- Teach verifier actual bounds of bpf_get_smp_processor_id()
and fix perf+libbpf issue related to custom section handling.
- Introduce bpf map element count and enable it for all program types.
- Add a BPF hook in sys_socket() to change the protocol ID
from IPPROTO_TCP to IPPROTO_MPTCP to cover migration for legacy.
- Introduce bpf_me_mcache_free_rcu() and fix OOM under stress.
- Add uprobe support for the bpf_get_func_ip helper.
- Check skb ownership against full socket.
- Support for up to 12 arguments in BPF trampoline.
- Extend link_info for kprobe_multi and perf_event links.
Netfilter
---------
- Speed-up process exit by aborting ruleset validation if a
fatal signal is pending.
- Allow NLA_POLICY_MASK to be used with BE16/BE32 types.
Driver API
----------
- Page pool optimizations, to improve data locality and cache usage.
- Introduce ndo_hwtstamp_get() and ndo_hwtstamp_set() to avoid the need
for raw ioctl() handling in drivers.
- Simplify genetlink dump operations (doit/dumpit) providing them
the common information already populated in struct genl_info.
- Extend and use the yaml devlink specs to [re]generate the split ops.
- Introduce devlink selective dumps, to allow SF filtering SF based on
handle and other attributes.
- Add yaml netlink spec for netlink-raw families, allow route, link and
address related queries via the ynl tool.
- Remove phylink legacy mode support.
- Support offload LED blinking to phy.
- Add devlink port function attributes for IPsec.
New hardware / drivers
----------------------
- Ethernet:
- Broadcom ASP 2.0 (72165) ethernet controller
- MediaTek MT7988 SoC
- Texas Instruments AM654 SoC
- Texas Instruments IEP driver
- Atheros qca8081 phy
- Marvell 88Q2110 phy
- NXP TJA1120 phy
- WiFi:
- MediaTek mt7981 support
- Can:
- Kvaser SmartFusion2 PCI Express devices
- Allwinner T113 controllers
- Texas Instruments tcan4552/4553 chips
- Bluetooth:
- Intel Gale Peak
- Qualcomm WCN3988 and WCN7850
- NXP AW693 and IW624
- Mediatek MT2925
Drivers
-------
- Ethernet NICs:
- nVidia/Mellanox:
- mlx5:
- support UDP encapsulation in packet offload mode
- IPsec packet offload support in eswitch mode
- improve aRFS observability by adding new set of counters
- extends MACsec offload support to cover RoCE traffic
- dynamic completion EQs
- mlx4:
- convert to use auxiliary bus instead of custom interface logic
- Intel
- ice:
- implement switchdev bridge offload, even for LAG interfaces
- implement SRIOV support for LAG interfaces
- igc:
- add support for multiple in-flight TX timestamps
- Broadcom:
- bnxt:
- use the unified RX page pool buffers for XDP and non-XDP
- use the NAPI skb allocation cache
- OcteonTX2:
- support Round Robin scheduling HTB offload
- TC flower offload support for SPI field
- Freescale:
- add XDP_TX feature support
- AMD:
- ionic: add support for PCI FLR event
- sfc:
- basic conntrack offload
- introduce eth, ipv4 and ipv6 pedit offloads
- ST Microelectronics:
- stmmac: maximze PTP timestamping resolution
- Virtual NICs:
- Microsoft vNIC:
- batch ringing RX queue doorbell on receiving packets
- add page pool for RX buffers
- Virtio vNIC:
- add per queue interrupt coalescing support
- Google vNIC:
- add queue-page-list mode support
- Ethernet high-speed switches:
- nVidia/Mellanox (mlxsw):
- add port range matching tc-flower offload
- permit enslavement to netdevices with uppers
- Ethernet embedded switches:
- Marvell (mv88e6xxx):
- convert to phylink_pcs
- Renesas:
- r8A779fx: add speed change support
- rzn1: enables vlan support
- Ethernet PHYs:
- convert mv88e6xxx to phylink_pcs
- WiFi:
- Qualcomm Wi-Fi 7 (ath12k):
- extremely High Throughput (EHT) PHY support
- RealTek (rtl8xxxu):
- enable AP mode for: RTL8192FU, RTL8710BU (RTL8188GU),
RTL8192EU and RTL8723BU
- RealTek (rtw89):
- Introduce Time Averaged SAR (TAS) support
- Connector:
- support for event filtering
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
-----BEGIN PGP SIGNATURE-----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=9CsR
-----END PGP SIGNATURE-----
Merge tag 'net-next-6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from Paolo Abeni:
"Core:
- Increase size limits for to-be-sent skb frag allocations. This
allows tun, tap devices and packet sockets to better cope with
large writes operations
- Store netdevs in an xarray, to simplify iterating over netdevs
- Refactor nexthop selection for multipath routes
- Improve sched class lifetime handling
- Add backup nexthop ID support for bridge
- Implement drop reasons support in openvswitch
- Several data races annotations and fixes
- Constify the sk parameter of routing functions
- Prepend kernel version to netconsole message
Protocols:
- Implement support for TCP probing the peer being under memory
pressure
- Remove hard coded limitation on IPv6 specific info placement inside
the socket struct
- Get rid of sysctl_tcp_adv_win_scale and use an auto-estimated per
socket scaling factor
- Scaling-up the IPv6 expired route GC via a separated list of
expiring routes
- In-kernel support for the TLS alert protocol
- Better support for UDP reuseport with connected sockets
- Add NEXT-C-SID support for SRv6 End.X behavior, reducing the SR
header size
- Get rid of additional ancillary per MPTCP connection struct socket
- Implement support for BPF-based MPTCP packet schedulers
- Format MPTCP subtests selftests results in TAP
- Several new SMC 2.1 features including unique experimental options,
max connections per lgr negotiation, max links per lgr negotiation
BPF:
- Multi-buffer support in AF_XDP
- Add multi uprobe BPF links for attaching multiple uprobes and usdt
probes, which is significantly faster and saves extra fds
- Implement an fd-based tc BPF attach API (TCX) and BPF link support
on top of it
- Add SO_REUSEPORT support for TC bpf_sk_assign
- Support new instructions from cpu v4 to simplify the generated code
and feature completeness, for x86, arm64, riscv64
- Support defragmenting IPv(4|6) packets in BPF
- Teach verifier actual bounds of bpf_get_smp_processor_id() and fix
perf+libbpf issue related to custom section handling
- Introduce bpf map element count and enable it for all program types
- Add a BPF hook in sys_socket() to change the protocol ID from
IPPROTO_TCP to IPPROTO_MPTCP to cover migration for legacy
- Introduce bpf_me_mcache_free_rcu() and fix OOM under stress
- Add uprobe support for the bpf_get_func_ip helper
- Check skb ownership against full socket
- Support for up to 12 arguments in BPF trampoline
- Extend link_info for kprobe_multi and perf_event links
Netfilter:
- Speed-up process exit by aborting ruleset validation if a fatal
signal is pending
- Allow NLA_POLICY_MASK to be used with BE16/BE32 types
Driver API:
- Page pool optimizations, to improve data locality and cache usage
- Introduce ndo_hwtstamp_get() and ndo_hwtstamp_set() to avoid the
need for raw ioctl() handling in drivers
- Simplify genetlink dump operations (doit/dumpit) providing them the
common information already populated in struct genl_info
- Extend and use the yaml devlink specs to [re]generate the split ops
- Introduce devlink selective dumps, to allow SF filtering SF based
on handle and other attributes
- Add yaml netlink spec for netlink-raw families, allow route, link
and address related queries via the ynl tool
- Remove phylink legacy mode support
- Support offload LED blinking to phy
- Add devlink port function attributes for IPsec
New hardware / drivers:
- Ethernet:
- Broadcom ASP 2.0 (72165) ethernet controller
- MediaTek MT7988 SoC
- Texas Instruments AM654 SoC
- Texas Instruments IEP driver
- Atheros qca8081 phy
- Marvell 88Q2110 phy
- NXP TJA1120 phy
- WiFi:
- MediaTek mt7981 support
- Can:
- Kvaser SmartFusion2 PCI Express devices
- Allwinner T113 controllers
- Texas Instruments tcan4552/4553 chips
- Bluetooth:
- Intel Gale Peak
- Qualcomm WCN3988 and WCN7850
- NXP AW693 and IW624
- Mediatek MT2925
Drivers:
- Ethernet NICs:
- nVidia/Mellanox:
- mlx5:
- support UDP encapsulation in packet offload mode
- IPsec packet offload support in eswitch mode
- improve aRFS observability by adding new set of counters
- extends MACsec offload support to cover RoCE traffic
- dynamic completion EQs
- mlx4:
- convert to use auxiliary bus instead of custom interface
logic
- Intel
- ice:
- implement switchdev bridge offload, even for LAG
interfaces
- implement SRIOV support for LAG interfaces
- igc:
- add support for multiple in-flight TX timestamps
- Broadcom:
- bnxt:
- use the unified RX page pool buffers for XDP and non-XDP
- use the NAPI skb allocation cache
- OcteonTX2:
- support Round Robin scheduling HTB offload
- TC flower offload support for SPI field
- Freescale:
- add XDP_TX feature support
- AMD:
- ionic: add support for PCI FLR event
- sfc:
- basic conntrack offload
- introduce eth, ipv4 and ipv6 pedit offloads
- ST Microelectronics:
- stmmac: maximze PTP timestamping resolution
- Virtual NICs:
- Microsoft vNIC:
- batch ringing RX queue doorbell on receiving packets
- add page pool for RX buffers
- Virtio vNIC:
- add per queue interrupt coalescing support
- Google vNIC:
- add queue-page-list mode support
- Ethernet high-speed switches:
- nVidia/Mellanox (mlxsw):
- add port range matching tc-flower offload
- permit enslavement to netdevices with uppers
- Ethernet embedded switches:
- Marvell (mv88e6xxx):
- convert to phylink_pcs
- Renesas:
- r8A779fx: add speed change support
- rzn1: enables vlan support
- Ethernet PHYs:
- convert mv88e6xxx to phylink_pcs
- WiFi:
- Qualcomm Wi-Fi 7 (ath12k):
- extremely High Throughput (EHT) PHY support
- RealTek (rtl8xxxu):
- enable AP mode for: RTL8192FU, RTL8710BU (RTL8188GU),
RTL8192EU and RTL8723BU
- RealTek (rtw89):
- Introduce Time Averaged SAR (TAS) support
- Connector:
- support for event filtering"
* tag 'net-next-6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1806 commits)
net: ethernet: mtk_wed: minor change in wed_{tx,rx}info_show
net: ethernet: mtk_wed: add some more info in wed_txinfo_show handler
net: stmmac: clarify difference between "interface" and "phy_interface"
r8152: add vendor/device ID pair for D-Link DUB-E250
devlink: move devlink_notify_register/unregister() to dev.c
devlink: move small_ops definition into netlink.c
devlink: move tracepoint definitions into core.c
devlink: push linecard related code into separate file
devlink: push rate related code into separate file
devlink: push trap related code into separate file
devlink: use tracepoint_enabled() helper
devlink: push region related code into separate file
devlink: push param related code into separate file
devlink: push resource related code into separate file
devlink: push dpipe related code into separate file
devlink: move and rename devlink_dpipe_send_and_alloc_skb() helper
devlink: push shared buffer related code into separate file
devlink: push port related code into separate file
devlink: push object register/unregister notifications into separate helpers
inet: fix IP_TRANSPARENT error handling
...
|
||
|
Linus Torvalds
|
68cf01760b |
This update includes the following changes:
API: - Move crypto engine callback from tfm ctx into algorithm object. - Fix atomic sleep bug in crypto_destroy_instance. - Move lib/mpi into lib/crypto. Algorithms: - Add chacha20 and poly1305 implementation for powerpc p10. Drivers: - Add AES skcipher and aead support to starfive. - Add Dynamic Boost Control support to ccp. - Add support for STM32P13 platform to stm32. -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEn51F/lCuNhUwmDeSxycdCkmxi6cFAmTsZkMACgkQxycdCkmx i6furw//e6kYK1CTOqidPM6nI0KK1Ok204VXu56H0wM4THZ09ZwcbDNKpvI6vjMi XZkKthiayl/1okmpRVP0rPqMWDtxajeu6IUAQqqFGUFU8R7AqCDrOd+te+zlSFWG 16ySNQO47RND0OzNqZ4ojgCC0n9RpP+zOfndmderZ4EnfXSbodwGUwkcuE7Z96cP jNoainO2iwlyMZPlVynrw61O3RxGu/s/ch+uY1mV+TyvAAWoOlzt57gYUs3eGduz 4Ky+0Ubctg3sfBaqA2Hg6GjtAqG/QUssRyj8YgsFMrgXPHDTbLh6abej39wWo4gz ZdC7Bm47hV/yfVdWe2iq3/5iqdILEdPBh3fDh6NNsZ1Jlm3aEZpH9rEXm0k4X2MJ A9NDAFVj8dAYVZza7+Y8jPc8FNe+HqN9HYip/2K7g68WAJGWnMc9lq9qGwGmg1Gl dn6yM27AgH8B+UljWYM9FS1ZFsc8KCudJavRZqA2d0W3rbXVWAoBBp83ii0yX1Nm ZPAblAYMZCDeCtrVrDYKLtGn566rfpCrv3R5cppwHLksGJsDxgWrjG47l9uy5HXI u05jiXT11R+pjIU2Wv5qsiUIhyvli6AaiFYHIdZ8fWaovPAOdhrCrN3IryvUVHj/ LqMcnmW1rWGNYN9pqHn0sQZ730ZJIma0klhTZOn8HPJNbiK68X0= =LbcA -----END PGP SIGNATURE----- Merge tag 'v6.6-p1' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6 Pull crypto updates from Herbert Xu: "API: - Move crypto engine callback from tfm ctx into algorithm object - Fix atomic sleep bug in crypto_destroy_instance - Move lib/mpi into lib/crypto Algorithms: - Add chacha20 and poly1305 implementation for powerpc p10 Drivers: - Add AES skcipher and aead support to starfive - Add Dynamic Boost Control support to ccp - Add support for STM32P13 platform to stm32" * tag 'v6.6-p1' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (149 commits) Revert "dt-bindings: crypto: qcom,prng: Add SM8450" crypto: chelsio - Remove unused declarations X.509: if signature is unsupported skip validation crypto: qat - fix crypto capability detection for 4xxx crypto: drivers - Explicitly include correct DT includes crypto: engine - Remove crypto_engine_ctx crypto: zynqmp - Use new crypto_engine_op interface crypto: virtio - Use new crypto_engine_op interface crypto: stm32 - Use new crypto_engine_op interface crypto: jh7110 - Use new crypto_engine_op interface crypto: rk3288 - Use new crypto_engine_op interface crypto: omap - Use new crypto_engine_op interface crypto: keembay - Use new crypto_engine_op interface crypto: sl3516 - Use new crypto_engine_op interface crypto: caam - Use new crypto_engine_op interface crypto: aspeed - Remove non-standard sha512 algorithms crypto: aspeed - Use new crypto_engine_op interface crypto: amlogic - Use new crypto_engine_op interface crypto: sun8i-ss - Use new crypto_engine_op interface crypto: sun8i-ce - Use new crypto_engine_op interface ... |
||
|
Linus Torvalds
|
f97e18a3f2 |
gpio updates for v6.6
Core GPIOLIB updates:
- wake-up poll() in user-space on device unbind
- improve fwnode usage
- interrupt domain handling improvements
- correctly handle the ngpios property in gpio-mmio
Driver cleanups:
- remove unneeded calls to platform_set_drvdata() all around the place
- remove unneeded of_match_ptr() expansions whenever a driver depends on
CONFIG_OF
- remove redundant calls to dev_err_probe() from gpio-omap and gpio-davinci
Driver improvements:
- use autopointers and guards from cleanup.h in gpio-sim
- shrink code in gpio-sim using some common helpers
- convert the idio family of drivers to using gpio-regmap
- convert gpio-ws16c48 to using gpio-regmap
- use devres to simplify code in gpio-pisosr and gpio-mxc
- update gpio-sifive: support IRQ wake, improve interrupt handling, allow
building as module
- make gpio-ge and gpio-bcm-kona OF-independent (plus some minor tweaks)
- add support for new models in gpio-pca953x and gpio-ds4520
- add runtime PM support to gpio-mxc
- fix a build warning in gpio-mxs
- add support for adding pin ranges to gpio-mlxbf3
- add counter/timer support to gpio-104-dio-48e
- switch to dynamic GPIO base allocation in gpio-vf610
- minor oneliners here and there
Device-tree bindings updates:
- enable the gpio-line-names property in snps,dw-apb and STMPE GPIO
- document new models in fsl-imx-gpio, ds4520 and pca95xx
- convert the bindings for brcm,kona-gpio to YAML
-----BEGIN PGP SIGNATURE-----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=t+zD
-----END PGP SIGNATURE-----
Merge tag 'gpio-updates-for-v6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux
Pull gpio updates from Bartosz Golaszewski:
"We have a lot of code refactoring using common helpers and ended up
removing more lines then we're adding this release cycle.
Nothing really stands out, just small updates all over the place.
Core GPIOLIB updates:
- wake-up poll() in user-space on device unbind
- improve fwnode usage
- interrupt domain handling improvements
- correctly handle the ngpios property in gpio-mmio
Driver cleanups:
- remove unneeded calls to platform_set_drvdata() all around the
place
- remove unneeded of_match_ptr() expansions whenever a driver depends
on CONFIG_OF
- remove redundant calls to dev_err_probe() from gpio-omap and
gpio-davinci
Driver improvements:
- use autopointers and guards from cleanup.h in gpio-sim
- shrink code in gpio-sim using some common helpers
- convert the idio family of drivers to using gpio-regmap
- convert gpio-ws16c48 to using gpio-regmap
- use devres to simplify code in gpio-pisosr and gpio-mxc
- update gpio-sifive: support IRQ wake, improve interrupt handling,
allow building as module
- make gpio-ge and gpio-bcm-kona OF-independent (plus some minor
tweaks)
- add support for new models in gpio-pca953x and gpio-ds4520
- add runtime PM support to gpio-mxc
- fix a build warning in gpio-mxs
- add support for adding pin ranges to gpio-mlxbf3
- add counter/timer support to gpio-104-dio-48e
- switch to dynamic GPIO base allocation in gpio-vf610
- minor oneliners here and there
Device-tree bindings updates:
- enable the gpio-line-names property in snps,dw-apb and STMPE GPIO
- document new models in fsl-imx-gpio, ds4520 and pca95xx
- convert the bindings for brcm,kona-gpio to YAML"
* tag 'gpio-updates-for-v6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux: (94 commits)
gpio: pca953x: add support for TCA9538
dt-bindings: gpio: pca95xx: document new tca9538 chip
gpio: pca953x: Use i2c_get_match_data()
gpio: mlxbf3: use capital "OR" for multiple licenses in SPDX
gpio: pcf857x: Extend match data support for OF tables
gpio: vf610: switch to dynamic allocat GPIO base
gpiolib: provide and use gpiod_line_state_notify()
gpio: cdev: wake up lineevent poll() on device unbind
gpio: cdev: wake up linereq poll() on device unbind
gpio: cdev: wake up chardev poll() on device unbind
gpiolib: add a second blocking notifier to struct gpio_device
gpio: cdev: open-code to_gpio_chardev_data()
gpiolib: rename the gpio_device notifier
gpio: mlxbf3: Support add_pin_ranges()
gpio: mxc: Use helper function devm_clk_get_optional_enabled()
gpio: pca9570: fix kerneldoc
gpio: sim: simplify code with cleanup helpers
gpio: sim: replace memmove() + strstrip() with skip_spaces() + strim()
gpio: sim: simplify gpio_sim_device_config_live_store()
gpio: mxc: release the parent IRQ in runtime suspend
...
|
||
|
Linus Torvalds
|
41e97d7acf |
hwmon updates for v6.6
- New drivers
* Driver for Renesas HS3001
- Chip support added to existing drivers
* pmbus/mp2975 driver now supports MP2971 and MP2973
- Functional improvements
* Additional voltage and temperature sensor support for
NCT6798/NCT6799 in nt6755 driver
* it87 driver now detects AMDTSI sensor type
* dimmtemp now supports more than 32 DIMMs
- Driver removals
* sm665 driver removed as unsupportable and long since obsolete
- Minor fixes, cleanups, and simplifications in several drivers
-----BEGIN PGP SIGNATURE-----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=dpys
-----END PGP SIGNATURE-----
Merge tag 'hwmon-for-v6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging
Pull hwmon updates from Guenter Roeck:
"New drivers:
- Renesas HS3001
Chip support added to existing drivers:
- pmbus/mp2975 driver now supports MP2971 and MP2973
Functional improvements:
- Additional voltage and temperature sensor support for
NCT6798/NCT6799 in nt6755 driver
- it87 driver now detects AMDTSI sensor type
- dimmtemp now supports more than 32 DIMMs
Driver removals:
- sm665 driver removed as unsupportable and long since obsolete
.. and minor fixes, cleanups, and simplifications in several drivers"
* tag 'hwmon-for-v6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: (57 commits)
hwmon: (tmp513) Simplify probe()
hwmon: (tmp513) Fix the channel number in tmp51x_is_visible()
hwmon: (mlxreg-fan) Extend number of supported fans
hwmon: (sis5595) Do PCI error checks on own line
hwmon: (vt8231) Do PCI error checks on own line
hwmon: (via686a) Do PCI error checks on own line
hwmon: pmbus: Fix -EIO seen on pli1209
hwmon: pmbus: Drop unnecessary clear fault page
hwmon: pmbus: Reduce clear fault page invocations
hwmon: (nsa320-hwmon) Remove redundant of_match_ptr()
hwmon: (pmbus/ucd9200) fix Wvoid-pointer-to-enum-cast warning
hwmon: (pmbus/ucd9000) fix Wvoid-pointer-to-enum-cast warning
hwmon: (pmbus/tps53679) fix Wvoid-pointer-to-enum-cast warning
hwmon: (pmbus/ibm-cffps) fix Wvoid-pointer-to-enum-cast warning
hwmon: (tmp513) fix Wvoid-pointer-to-enum-cast warning
hwmon: (max6697) fix Wvoid-pointer-to-enum-cast warning
hwmon: (max20730) fix Wvoid-pointer-to-enum-cast warning
hwmon: (lm90) fix Wvoid-pointer-to-enum-cast warning
hwmon: (lm85) fix Wvoid-pointer-to-enum-cast warning
hwmon: (lm75) fix Wvoid-pointer-to-enum-cast warning
...
|
||
|
Linus Torvalds
|
995cda6210 |
MMC core:
- Convert drivers to use the ->remove_new() callback - Propagate the removable attribute for the card's device MMC host: - Convert drivers to use the ->remove_new() callback - atmel-mci: Convert to gpio descriptors and cleanup the code - davinci: Make SDIO irq truly optional - renesas_sdhi: Register irqs before registering controller - sdhci: Simplify the sdhci_pltfm_* interface a bit - sdhci-esdhc-imx: Improve support for the 1.8V errata - sdhci-of-at91: Add support for the microchip sam9x7 variant - sdhci-of-dwcmshc: Add support for runtime PM - sdhci-pci-o2micro: Add support for the new Bayhub GG8 variant - sdhci-sprd: Add support for SD high-speed mode tuning - uniphier-sd: Register irqs before registering controller -----BEGIN PGP SIGNATURE----- iQJLBAABCgA1FiEEugLDXPmKSktSkQsV/iaEJXNYjCkFAmTsjhEXHHVsZi5oYW5z c29uQGxpbmFyby5vcmcACgkQ/iaEJXNYjClEFw/+M+3T0mb5NEgEyq6++Jz/erSQ jMMy1y+ESRspVtQRh5tvPRH2PtJG1pK8vAkm8RD1ghYG5ST3qhpfPfadB5nAxm5v bEbfrYZFUabsTQ/xBR9RScHFEYqNvNx8mzPPJqLgYQcXZe2Xh1xAtMZhqCSsMHWb j8jBJyPtKWEUasLeFf5ZTcCpsvDe3ekLmqOkFa/E8YekCQHLzFRGQ+6nHZ8WRLQ8 hCs49+Pe8rTgJccDxjvm0k3CY5wejAfCOCrvca59Fp3s/Nu5jSEpuJaVTJsBLKmx 7RuaJkKfy/CgleC28fkmMBWUid+CdrKvQmGwelsECLFU7jVc9sqaPA9g8Bn8rQtK MtpcY9FzT94RJvIUPQmoIUgDWod30hCqgFhVorwTUr/2RknW9l1qqcKyKCDGkmyA 2fprMP6xizTOVQr5mioe5TojICpTWOKrvQQc+4HoF4YTK7s6gTAeeV2ahUoA4wnQ b/OTGU9AzcsUSPZL0UTvlbzhz2g3ng2/PLOEQ+YeibV8XI5gTmVSRdaHnxGlYVVv LDgVu7TLnlpknPAb5Jun6P5RI7zf7mjy7No3TEaYmVtjQuRkpt5PKesJQtp5SwNa dyFX2RGzsz2e3v5e34UNASLas9qfG8zFkZcLBa+EvvefJBhjK7K5a8oB1sAyl9bc zPn+gbGCDvJT3Qg+k1Q= =ktYf -----END PGP SIGNATURE----- Merge tag 'mmc-v6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc Pull MMC updates from Ulf Hansson: "MMC core: - Convert drivers to use the ->remove_new() callback - Propagate the removable attribute for the card's device MMC host: - Convert drivers to use the ->remove_new() callback - atmel-mci: Convert to gpio descriptors and cleanup the code - davinci: Make SDIO irq truly optional - renesas_sdhi: Register irqs before registering controller - sdhci: Simplify the sdhci_pltfm_* interface a bit - sdhci-esdhc-imx: Improve support for the 1.8V errata - sdhci-of-at91: Add support for the microchip sam9x7 variant - sdhci-of-dwcmshc: Add support for runtime PM - sdhci-pci-o2micro: Add support for the new Bayhub GG8 variant - sdhci-sprd: Add support for SD high-speed mode tuning - uniphier-sd: Register irqs before registering controller" * tag 'mmc-v6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc: (108 commits) mmc: atmel-mci: Move card detect gpio polarity quirk to gpiolib mmc: atmel-mci: move atmel MCI header file mmc: atmel-mci: Convert to gpio descriptors mmc: sdhci-sprd: Add SD HS mode online tuning mmc: core: Add host specific tuning support for SD HS mode mmc: sdhci-of-dwcmshc: Add runtime PM operations mmc: sdhci-of-dwcmshc: Add error handling in dwcmshc_resume mmc: sdhci-esdhc-imx: improve ESDHC_FLAG_ERR010450 mmc: sdhci-pltfm: Rename sdhci_pltfm_register() mmc: sdhci-pltfm: Remove sdhci_pltfm_unregister() mmc: sdhci-st: Use sdhci_pltfm_remove() mmc: sdhci-pxav2: Use sdhci_pltfm_remove() mmc: sdhci-of-sparx5: Use sdhci_pltfm_remove() mmc: sdhci-of-hlwd: Use sdhci_pltfm_remove() mmc: sdhci-of-esdhc: Use sdhci_pltfm_remove() mmc: sdhci-of-at91: Use sdhci_pltfm_remove() mmc: sdhci-of-arasan: Use sdhci_pltfm_remove() mmc: sdhci-iproc: Use sdhci_pltfm_remove() mmc: sdhci_f_sdh30: Use sdhci_pltfm_remove() mmc: sdhci-dove: Use sdhci_pltfm_remove() ... |
||
|
Linus Torvalds
|
3b6bf5b1f8 |
spi: Updates for v6.6
There's been quite a lot of generic activity here, but more
administrative than featuers. We also have a bunch of new drivers,
including one that's part of a MFD so we pulled in the core parts of
that:
- Lots of work from both Yang Yingliang and Andy Shevchenko on moving
to host/device/controller based terminology for devices.
- QuadSPI SPI support for Allwinner sun6i.
- New device support Cirrus Logic CS43L43, Longsoon, Qualcomm GENI
QuPv3 and StarFive JH7110 QSPI.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmTp6KQACgkQJNaLcl1U
h9BHMQf+Jtvdx8cIhzVyMRBUfmeEzpi5oGiurPiQVBM5RsO0APULbxdy1kBsQ4FO
5Omv7juG323XiZc1hrtBPNoZfnn83pjjMFZZZYse8Ntd6e5iesHzxRQJaml8NPBA
0ktJQiB6Eh9WTjYT6LgN8T5j4SLT5F2jiDinBPUj1vHGSy0YXGWpYFq9QIkXwMbE
8n0jyf5+Neccs4CIiPR3ap8NjIyPE/b761acRFkOmF+iiHWmnFrQYNS4CSxR2kOC
yL0SlzuoG2feYSfiHyCKIPC0MGT5/Vn1tzNqoEam6B6Ecql24W8BMdU0/No3yKPT
22LIfRWR9Wb5usFxjDxIs9YaWD4abA==
=oj/i
-----END PGP SIGNATURE-----
Merge tag 'spi-v6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi
Pull spi updates from Mark Brown:
"There's been quite a lot of generic activity here, but more
administrative than featuers. We also have a bunch of new drivers,
including one that's part of a MFD so we pulled in the core parts of
that:
- Lots of work from both Yang Yingliang and Andy Shevchenko on moving
to host/device/controller based terminology for devices.
- QuadSPI SPI support for Allwinner sun6i.
- New device support Cirrus Logic CS43L43, Longsoon, Qualcomm GENI
QuPv3 and StarFive JH7110 QSPI"
* tag 'spi-v6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: (151 commits)
spi: at91-usart: Use PTR_ERR_OR_ZERO() to simplify code
spi: spi-sn-f-ospi: switch to use modern name
spi: sifive: switch to use modern name
spi: sh: switch to use modern name
spi: sh-sci: switch to use modern name
spi: sh-msiof: switch to use modern name
spi: sh-hspi: switch to use modern name
spi: sc18is602: switch to use modern name
spi: s3c64xx: switch to use modern name
spi: rzv2m-csi: switch to use devm_spi_alloc_host()
spi: rspi: switch to use spi_alloc_host()
spi: rockchip: switch to use modern name
spi: rockchip-sfc: switch to use modern name
spi: realtek-rtl: switch to use devm_spi_alloc_host()
spi: rb4xx: switch to use modern name
spi: qup: switch to use modern name
spi: spi-qcom-qspi: switch to use modern name
spi: pxa2xx: switch to use modern name
spi: ppc4xx: switch to use modern name
spi: spl022: switch to use modern name
...
|
||
|
Linus Torvalds
|
65234f96f2 |
regulator: Updates for v6.6
Other tha new device support and some minor fixes this has been a really
quiet release, the only notable things are the new drivers. There's a
couple of MFDs among the new devices so the generic parts are pulled in:
- Support for Analog Devices MAX77831/57/59, Awinc AW37503, Qualcom
PMX75 and RFGEN, RealTek RT5733, RichTek RTQ2208 and Texas
Instruments TPS65086.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmTp6U4ACgkQJNaLcl1U
h9Cu4gf/RZZirDVcISmKrIYn95Dc838pHFe3tIK9Ehbwms/pzBWBzT0Eiy36g4Vd
1pUB6YJKJZIKLOfFAjmudGtT9C3Yrui+3cR3dPtxN793ixfCkT2RVdeaNJDCJ6xo
cPpAekMroDpMSczDvsTaqJzCXb4y+rjsAQ201w+WhegkSLk/yMsW7Y+a6wpaMjwt
qGD/+EDk/54aogPhrGvKq7uLwCgDo2A6HrU2rIIMHYnZuPaSjsPGcd0fZahlP7Mk
1b6/SSJ+KvN0XSAgBz4yFixECb0OG9p5ukpV17hwDAPBbNqLRp+O/o3LFLq+nsoY
yG3RpJQM6r3Bw3KqdxWF/e5sUNkEsQ==
=ZB93
-----END PGP SIGNATURE-----
Merge tag 'regulator-v6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator
Pull regulator updates from Mark Brown:
"Other than new device support and some minor fixes this has been a
really quiet release, the only notable things are the new drivers.
There's a couple of MFDs among the new devices so the generic parts
are pulled in:
- Support for Analog Devices MAX77831/57/59, Awinc AW37503, Qualcom
PMX75 and RFGEN, RealTek RT5733, RichTek RTQ2208 and Texas
Instruments TPS65086"
* tag 'regulator-v6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator: (68 commits)
regulator: userspace-consumer: Drop event support for this cycle
regulator: aw37503: Switch back to use struct i2c_driver's .probe()
dt-bindings: regulator: qcom,rpmh-regulator: allow i, j, l, m & n as RPMh resource name suffix
regulator: dt-bindings: Add Awinic AW37503
regulator: aw37503: add regulator driver for Awinic AW37503
regulator: tps65086: Select dedicated regulator config for chip variant
mfd: tps65086: Read DEVICE ID register 1 from device
regulator: raa215300: Update help description
regulator: raa215300: Add missing blank space
regulator: raa215300: Change rate from 32000->32768
regulator: db8500-prcmu: Remove unused declaration power_state_active_is_enabled()
regulator: raa215300: Add const definition
regulator: raa215300: Fix resource leak in case of error
regulator: rtq2208: Switch back to use struct i2c_driver's .probe()
regulator: lp872x: Fix Wvoid-pointer-to-enum-cast warning
regulator: max77857: Fix Wvoid-pointer-to-enum-cast warning
regulator: ltc3589: Fix Wvoid-pointer-to-enum-cast warning
regulator: qcom_rpm-regulator: Use devm_kmemdup to replace devm_kmalloc + memcpy
regulator: tps6286x-regulator: Remove redundant of_match_ptr() macros
regulator: pfuze100-regulator: Remove redundant of_match_ptr() macro
...
|
||
|
Linus Torvalds
|
0fc81f3764 |
regmap: Updates for v6.6
This is a much quieter release than the past few, there's one small API
addition that I noticed a user for in ALSA and a bunch of cleanups:
- Provide an interface for determining if a register is present in the
cache and add a user of it in ALSA.
- Full support for dynamic allocations, following the temporary bodges
that were done as fixes in the previous release.
- Remove the unused and questionably working 64 bit support.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmTp43QACgkQJNaLcl1U
h9BjUQf/RDJztYDL/ELIxVPfdFWAgTfAErcRgKpdpnrhMR0GljGYNyrTMwUBbnuF
+EL2v+k34wDNGobLbnGaHJIMb+r26QrHCoX9Zm0r/b5z9v3yS3QXco/MueZyMz45
SYbiEUnXj/WjYUUtVpVw6nxnREH6XpOZ1080XF4Bg9YpyCiq7128WJwivuT8XLJM
qZSb4DOQXFV26nitpTuJMkRIS1FgIh5ZKAPWpvZfP+wOStZhW3IFGlWIAkOQQ5gK
PqFA0BQV1fOVttjRGAR2sKCS4MfuIkIHmCfSfvNfLQG2GW86zb+Bpi0BFEUnl4Py
dqzztIknq19fWe9mCElSrdww25M2vg==
=fqmz
-----END PGP SIGNATURE-----
Merge tag 'regmap-v6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap
Pull regmap updates from Mark Brown:
"This is a much quieter release than the past few, there's one small
API addition that I noticed a user for in ALSA and a bunch of
cleanups:
- Provide an interface for determining if a register is present in
the cache and add a user of it in ALSA.
- Full support for dynamic allocations, following the temporary
bodges that were done as fixes in the previous release.
- Remove the unused and questionably working 64 bit support"
* tag 'regmap-v6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap:
regmap: Fix the type used for a bitmap pointer
regmap: Remove dynamic allocation warnings for rbtree and maple
regmap: rbtree: Use alloc_flags for memory allocations
regmap: maple: Use alloc_flags for memory allocations
regmap: Reject fast_io regmap configurations with RBTREE and MAPLE caches
ALSA: hda: Use regcache_reg_cached() rather than open coding
regmap: Provide test for regcache_reg_present()
regmap: Let users check if a register is cached
regmap: Provide user selectable option to enable regmap
regmap: mmio: Remove unused 64-bit support code
regmap: cache: Revert "Add 64-bit mode support"
regmap: Revert "add 64-bit mode support" and Co.
|
||
|
Linus Torvalds
|
c35c486c12 |
HSI changes for the 6.6 series
* explicitly include correct DT includes -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEE72YNB0Y/i3JqeVQT2O7X88g7+poFAmTlOcAACgkQ2O7X88g7 +po5Og//dXM0WQw4QDEl79+Fj8bkpJxhEtfQx0V4X/NMs9LqSF4iY3fJJ6pjvjf+ H+ZwGs1KKJE4ijOe5B+ubkzGGD1EXI9+/LHGYE+1scB21ejs1GEu4dXoSwy4bcNo tox0szRNYSmMtnmKTUpfiXIEdnltjZ1Rzu6+ZrXEP0AWr6CcLUloBoqTfmBjDfFp 1hqZ4eDmvqU5HN/SOZ+ApKshEF5B4bpKrUZ/rrBcOHrUUORcUMIgI3+RIHzg3+Tm 3e2jDG8Fqz16WQRwwDuW24pAtXYZN7+gNm2jP1VhnhZB7mRx6776A29RW7ulOW95 0g+Kj/982oNw2IGzSyUMITDHg3Bz4Yp8hjquE9qHt4cvP/4T2E5cZDhG0+p2UvEE nlNVxsJDi9txxEe8CEUkqckWln17Ldn5sIQk4j255QfpV+1+2QK2beYghQ0ww2n0 R4x2EA3ofYqtS1+tiVXWiMWk8VowMl2/PZ2rztDIsH4OE5zlmp8f/JKKth/9ZFVl 5N19qzLqlqSothRBcYoAvPFs80kjYIxkIhG4f18dgrl4tVAdA7g3ZVpsL9RP5zN0 +2ptJdthdgUHUsk6VKb6WIy1AnSL+LtipLe1Qg4tpQXmby8KJ2nTL38a1slrSAi3 nIcDj/Yntk5dJwx0oSK9sOC4cktG/bxs+h5yVrSfCAXig8HCCVI= =dhmq -----END PGP SIGNATURE----- Merge tag 'hsi-for-6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-hsi Pull HSI update from Sebastian Reichel: - explicitly include correct DT includes * tag 'hsi-for-6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-hsi: hsi: omap_ssi: Explicitly include correct DT includes |
||
|
Linus Torvalds
|
b547f9b300 |
power supply and reset changes for the 6.6 series
* core: avoid duplicate hwmon device from thermal framework * convert multiple drivers to devm_platform_ioremap_resource * at91-reset: add sysfs interface to the power on reason * misc. small fixes and improvements -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEE72YNB0Y/i3JqeVQT2O7X88g7+poFAmTlQMgACgkQ2O7X88g7 +ppBog//T9P+yTClsJTkuoNt8IMelvFcy0OPifmBRfXg0fJJyEXXrgBXcGZS5dxs GqrLK4RPnFFoFyuK/umd0RbIWVrhFVR4AH0Xp8fZuxqFLAa4m0Hg4cnOGchZgYbR hLva+jtyor8Avr6JPAP80W0lx02vJTloDe/KR8Rdf7YtmxsNi/I/3MmOfof+mCmn 7hCBKdEp5VzX08J+1zBx4tzDaQ8s0MSMkJRcogGHcG11D3j4aVzNqJ8HFVCHRQZd D+IcPg5VgRT3YyO2OosF/WcBdJWhKUpZjoLR2ukpIr1vpbX238aa4Y5Il+ovdNxr IFp/MJkFO+NEIpGxvzjSdBLJq4GxyBeyv7uweRs1MWF+bwzFlXxRzvLcwbGymsCF 6cHJy6ynkpXuFAUY0txB7x2TDGzB9nPUZ71OIE7zhkfuYsBGlZRwu+DnipqTSd0R MyAjsr8shCmYWG4PU1WDfhgvpBNEqxjllP5sdy7om7DmC2vvaCqiBcXOykm3DMbL G2/9M6elfv9hLpHoWvfCsKNCEXUD4vXugtcoUSKs91YqlAlQpKG14BHt4aKWfsI7 CVcil8O+k+u7Gzn5QxI4x6G8ymP0NCnNwbj8cpZioyaORekwp2NUicUVIw03DKBf MggZqTukcs5J8g157Og+BDOsy2zCRur67k9JeFMvZO00hwsCxvc= =Tt7S -----END PGP SIGNATURE----- Merge tag 'for-v6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply Pull power supply and reset updates from Sebastian Reichel: - core: avoid duplicate hwmon device from thermal framework - convert multiple drivers to devm_platform_ioremap_resource - at91-reset: add sysfs interface to the power on reason - misc small fixes and improvements * tag 'for-v6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply: power: supply: qcom_pmi8998_charger: fix charger status power: supply: qcom_pmi8998_charger: remove CHARGE_CONTROL_LIMIT_* props power: supply: qcom_pmi8998_charger: fix uninitialized variable power: reset: oxnas-restart: remove obsolete restart driver power: supply: core: Avoid duplicate hwmon device from thermal framework power: reset: ocelot: Convert to devm_platform_ioremap_resource() power: reset: msm: Convert to devm_platform_ioremap_resource() power: reset: gemini-poweroff: Convert to devm_platform_ioremap_resource() power: reset: brcm-kona: Convert to devm_platform_ioremap_resource() power: reset: at91-sama5d2_shdwc: Convert to devm_platform_ioremap_resource() power: reset: at91-poweroff: Convert to devm_platform_ioremap_resource() power: reset: at91-reset: add sysfs interface to the power on reason power: supply: bd99954: make read-only array sub_status_reg power: supply: bq24190: Considers FORCE_20PCT when getting IPRECHG power: Explicitly include correct DT includes |
||
|
Linus Torvalds
|
5ea0cf7758 |
auxdisplay update for v6.6
- hd44780: move cursor home after clear display command
The change allows to support displays like the NewHaven
NHD-0220DZW-AG5 which has a non-standard controller.
-----BEGIN PGP SIGNATURE-----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=BriL
-----END PGP SIGNATURE-----
Merge tag 'auxdisplay-6.6' of https://github.com/ojeda/linux
Pull auxdisplay update from Miguel Ojeda:
- hd44780: move cursor home after clear display command
The change allows to support displays like the NewHaven
NHD-0220DZW-AG5 which has a non-standard controller.
* tag 'auxdisplay-6.6' of https://github.com/ojeda/linux:
auxdisplay: hd44780: move cursor home after clear display command
|
||
|
Linus Torvalds
|
a031fe8d1d |
Rust changes for v6.6
In terms of lines, most changes this time are on the pinned-init API
and infrastructure. While we have a Rust version upgrade, and thus a
bunch of changes from the vendored 'alloc' crate as usual, this time
those do not account for many lines.
Toolchain and infrastructure:
- Upgrade to Rust 1.71.1. This is the second such upgrade, which is a
smaller jump compared to the last time.
This version allows us to remove the '__rust_*' allocator functions
-- the compiler now generates them as expected, thus now our
'KernelAllocator' is used.
It also introduces the 'offset_of!' macro in the standard library
(as an unstable feature) which we will need soon. So far, we were
using a declarative macro as a prerequisite in some not-yet-landed
patch series, which did not support sub-fields (i.e. nested structs):
#[repr(C)]
struct S {
a: u16,
b: (u8, u8),
}
assert_eq!(offset_of!(S, b.1), 3);
- Upgrade to bindgen 0.65.1. This is the first time we upgrade its
version.
Given it is a fairly big jump, it comes with a fair number of
improvements/changes that affect us, such as a fix needed to support
LLVM 16 as well as proper support for '__noreturn' C functions, which
are now mapped to return the '!' type in Rust:
void __noreturn f(void); // C
pub fn f() -> !; // Rust
- 'scripts/rust_is_available.sh' improvements and fixes.
This series takes care of all the issues known so far and adds a few
new checks to cover for even more cases, plus adds some more help
texts. All this together will hopefully make problematic setups
easier to identify and to be solved by users building the kernel.
In addition, it adds a test suite which covers all branches of the
shell script, as well as tests for the issues found so far.
- Support rust-analyzer for out-of-tree modules too.
- Give 'cfg's to rust-analyzer for the 'core' and 'alloc' crates.
- Drop 'scripts/is_rust_module.sh' since it is not needed anymore.
Macros crate:
- New 'paste!' proc macro.
This macro is a more flexible version of 'concat_idents!': it allows
the resulting identifier to be used to declare new items and it
allows to transform the identifiers before concatenating them, e.g.
let x_1 = 42;
paste!(let [<x _2>] = [<x _1>];);
assert!(x_1 == x_2);
The macro is then used for several of the pinned-init API changes in
this pull.
Pinned-init API:
- Make '#[pin_data]' compatible with conditional compilation of fields,
allowing to write code like:
#[pin_data]
pub struct Foo {
#[cfg(CONFIG_BAR)]
a: Bar,
#[cfg(not(CONFIG_BAR))]
a: Baz,
}
- New '#[derive(Zeroable)]' proc macro for the 'Zeroable' trait, which
allows 'unsafe' implementations for structs where every field
implements the 'Zeroable' trait, e.g.:
#[derive(Zeroable)]
pub struct DriverData {
id: i64,
buf_ptr: *mut u8,
len: usize,
}
- Add '..Zeroable::zeroed()' syntax to the 'pin_init!' macro for
zeroing all other fields, e.g.:
pin_init!(Buf {
buf: [1; 64],
..Zeroable::zeroed()
});
- New '{,pin_}init_array_from_fn()' functions to create array
initializers given a generator function, e.g.:
let b: Box<[usize; 1_000]> = Box::init::<Error>(
init_array_from_fn(|i| i)
).unwrap();
assert_eq!(b.len(), 1_000);
assert_eq!(b[123], 123);
- New '{,pin_}chain' methods for '{,Pin}Init<T, E>' that allow to
execute a closure on the value directly after initialization, e.g.:
let foo = init!(Foo {
buf <- init::zeroed()
}).chain(|foo| {
foo.setup();
Ok(())
});
- Support arbitrary paths in init macros, instead of just identifiers
and generic types.
- Implement the 'Zeroable' trait for the 'UnsafeCell<T>' and
'Opaque<T>' types.
- Make initializer values inaccessible after initialization.
- Make guards in the init macros hygienic.
'allocator' module:
- Use 'krealloc_aligned()' in 'KernelAllocator::alloc' preventing
misaligned allocations when the Rust 1.71.1 upgrade is applied later
in this pull.
The equivalent fix for the previous compiler version (where
'KernelAllocator' is not yet used) was merged into 6.5 already,
which added the 'krealloc_aligned()' function used here.
- Implement 'KernelAllocator::{realloc, alloc_zeroed}' for performance,
using 'krealloc_aligned()' too, which forwards the call to the C API.
'types' module:
- Make 'Opaque' be '!Unpin', removing the need to add a 'PhantomPinned'
field to Rust structs that contain C structs which must not be moved.
- Make 'Opaque' use 'UnsafeCell' as the outer type, rather than inner.
Documentation:
- Suggest obtaining the source code of the Rust's 'core' library using
the tarball instead of the repository.
MAINTAINERS:
- Andreas and Alice, from Samsung and Google respectively, are joining
as reviewers of the "RUST" entry.
As well as a few other minor changes and cleanups.
-----BEGIN PGP SIGNATURE-----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=BAP+
-----END PGP SIGNATURE-----
Merge tag 'rust-6.6' of https://github.com/Rust-for-Linux/linux
Pull rust updates from Miguel Ojeda:
"In terms of lines, most changes this time are on the pinned-init API
and infrastructure. While we have a Rust version upgrade, and thus a
bunch of changes from the vendored 'alloc' crate as usual, this time
those do not account for many lines.
Toolchain and infrastructure:
- Upgrade to Rust 1.71.1. This is the second such upgrade, which is a
smaller jump compared to the last time.
This version allows us to remove the '__rust_*' allocator functions
-- the compiler now generates them as expected, thus now our
'KernelAllocator' is used.
It also introduces the 'offset_of!' macro in the standard library
(as an unstable feature) which we will need soon. So far, we were
using a declarative macro as a prerequisite in some not-yet-landed
patch series, which did not support sub-fields (i.e. nested
structs):
#[repr(C)]
struct S {
a: u16,
b: (u8, u8),
}
assert_eq!(offset_of!(S, b.1), 3);
- Upgrade to bindgen 0.65.1. This is the first time we upgrade its
version.
Given it is a fairly big jump, it comes with a fair number of
improvements/changes that affect us, such as a fix needed to
support LLVM 16 as well as proper support for '__noreturn' C
functions, which are now mapped to return the '!' type in Rust:
void __noreturn f(void); // C
pub fn f() -> !; // Rust
- 'scripts/rust_is_available.sh' improvements and fixes.
This series takes care of all the issues known so far and adds a
few new checks to cover for even more cases, plus adds some more
help texts. All this together will hopefully make problematic
setups easier to identify and to be solved by users building the
kernel.
In addition, it adds a test suite which covers all branches of the
shell script, as well as tests for the issues found so far.
- Support rust-analyzer for out-of-tree modules too.
- Give 'cfg's to rust-analyzer for the 'core' and 'alloc' crates.
- Drop 'scripts/is_rust_module.sh' since it is not needed anymore.
Macros crate:
- New 'paste!' proc macro.
This macro is a more flexible version of 'concat_idents!': it
allows the resulting identifier to be used to declare new items and
it allows to transform the identifiers before concatenating them,
e.g.
let x_1 = 42;
paste!(let [<x _2>] = [<x _1>];);
assert!(x_1 == x_2);
The macro is then used for several of the pinned-init API changes
in this pull.
Pinned-init API:
- Make '#[pin_data]' compatible with conditional compilation of
fields, allowing to write code like:
#[pin_data]
pub struct Foo {
#[cfg(CONFIG_BAR)]
a: Bar,
#[cfg(not(CONFIG_BAR))]
a: Baz,
}
- New '#[derive(Zeroable)]' proc macro for the 'Zeroable' trait,
which allows 'unsafe' implementations for structs where every field
implements the 'Zeroable' trait, e.g.:
#[derive(Zeroable)]
pub struct DriverData {
id: i64,
buf_ptr: *mut u8,
len: usize,
}
- Add '..Zeroable::zeroed()' syntax to the 'pin_init!' macro for
zeroing all other fields, e.g.:
pin_init!(Buf {
buf: [1; 64],
..Zeroable::zeroed()
});
- New '{,pin_}init_array_from_fn()' functions to create array
initializers given a generator function, e.g.:
let b: Box<[usize; 1_000]> = Box::init::<Error>(
init_array_from_fn(|i| i)
).unwrap();
assert_eq!(b.len(), 1_000);
assert_eq!(b[123], 123);
- New '{,pin_}chain' methods for '{,Pin}Init<T, E>' that allow to
execute a closure on the value directly after initialization, e.g.:
let foo = init!(Foo {
buf <- init::zeroed()
}).chain(|foo| {
foo.setup();
Ok(())
});
- Support arbitrary paths in init macros, instead of just identifiers
and generic types.
- Implement the 'Zeroable' trait for the 'UnsafeCell<T>' and
'Opaque<T>' types.
- Make initializer values inaccessible after initialization.
- Make guards in the init macros hygienic.
'allocator' module:
- Use 'krealloc_aligned()' in 'KernelAllocator::alloc' preventing
misaligned allocations when the Rust 1.71.1 upgrade is applied
later in this pull.
The equivalent fix for the previous compiler version (where
'KernelAllocator' is not yet used) was merged into 6.5 already,
which added the 'krealloc_aligned()' function used here.
- Implement 'KernelAllocator::{realloc, alloc_zeroed}' for
performance, using 'krealloc_aligned()' too, which forwards the
call to the C API.
'types' module:
- Make 'Opaque' be '!Unpin', removing the need to add a
'PhantomPinned' field to Rust structs that contain C structs which
must not be moved.
- Make 'Opaque' use 'UnsafeCell' as the outer type, rather than
inner.
Documentation:
- Suggest obtaining the source code of the Rust's 'core' library
using the tarball instead of the repository.
MAINTAINERS:
- Andreas and Alice, from Samsung and Google respectively, are
joining as reviewers of the "RUST" entry.
As well as a few other minor changes and cleanups"
* tag 'rust-6.6' of https://github.com/Rust-for-Linux/linux: (42 commits)
rust: init: update expanded macro explanation
rust: init: add `{pin_}chain` functions to `{Pin}Init<T, E>`
rust: init: make `PinInit<T, E>` a supertrait of `Init<T, E>`
rust: init: implement `Zeroable` for `UnsafeCell<T>` and `Opaque<T>`
rust: init: add support for arbitrary paths in init macros
rust: init: add functions to create array initializers
rust: init: add `..Zeroable::zeroed()` syntax for zeroing all missing fields
rust: init: make initializer values inaccessible after initializing
rust: init: wrap type checking struct initializers in a closure
rust: init: make guards in the init macros hygienic
rust: add derive macro for `Zeroable`
rust: init: make `#[pin_data]` compatible with conditional compilation of fields
rust: init: consolidate init macros
docs: rust: clarify what 'rustup override' does
docs: rust: update instructions for obtaining 'core' source
docs: rust: add command line to rust-analyzer section
scripts: generate_rust_analyzer: provide `cfg`s for `core` and `alloc`
rust: bindgen: upgrade to 0.65.1
rust: enable `no_mangle_with_rust_abi` Clippy lint
rust: upgrade to Rust 1.71.1
...
|
||
|
Linus Torvalds
|
f2586d921c |
Hi,
Contents: - Restrict linking of keys to .ima and .evm keyrings based on digitalSignature attribute in the certificate. - PowerVM: load machine owner keys into the .machine [1] keyring. - PowerVM: load module signing keys into the secondary trusted keyring (keys blessed by the vendor). - tpm_tis_spi: half-duplex transfer mode - tpm_tis: retry corrupted transfers - Apply revocation list (.mokx) to an all system keyrings (e.g. .machine keyring). [1] https://blogs.oracle.com/linux/post/the-machine-keyring BR, Jarkko -----BEGIN PGP SIGNATURE----- iIgEABYIADAWIQRE6pSOnaBC00OEHEIaerohdGur0gUCZN5/qBIcamFya2tvQGtl cm5lbC5vcmcACgkQGnq6IXRrq9J4GQEAstTtQfGGrx5KInOTMWOvaq/Cum5iW4AD NefVfbUtCCQBANvFtxoPYQS5u6+rIdxzIwFiNUlOyt2uR2bkk4UUiPML =Vvs8 -----END PGP SIGNATURE----- Merge tag 'tpmdd-v6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/jarkko/linux-tpmdd Pull tpm updates from Jarkko Sakkinen: - Restrict linking of keys to .ima and .evm keyrings based on digitalSignature attribute in the certificate - PowerVM: load machine owner keys into the .machine [1] keyring - PowerVM: load module signing keys into the secondary trusted keyring (keys blessed by the vendor) - tpm_tis_spi: half-duplex transfer mode - tpm_tis: retry corrupted transfers - Apply revocation list (.mokx) to an all system keyrings (e.g. .machine keyring) Link: https://blogs.oracle.com/linux/post/the-machine-keyring [1] * tag 'tpmdd-v6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/jarkko/linux-tpmdd: certs: Reference revocation list for all keyrings tpm/tpm_tis_synquacer: Use module_platform_driver macro to simplify the code tpm: remove redundant variable len tpm_tis: Resend command to recover from data transfer errors tpm_tis: Use responseRetry to recover from data transfer errors tpm_tis: Move CRC check to generic send routine tpm_tis_spi: Add hardware wait polling KEYS: Replace all non-returning strlcpy with strscpy integrity: PowerVM support for loading third party code signing keys integrity: PowerVM machine keyring enablement integrity: check whether imputed trust is enabled integrity: remove global variable from machine_keyring.c integrity: ignore keys failing CA restrictions on non-UEFI platform integrity: PowerVM support for loading CA keys on machine keyring integrity: Enforce digitalSignature usage in the ima and evm keyrings KEYS: DigitalSignature link restriction tpm_tis: Revert "tpm_tis: Disable interrupts on ThinkPad T490s" |
||
|
Paolo Abeni
|
c873512ef3 |
Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Merge in late fixes to prepare for the 6.6 net-next PR. No conflicts. Signed-off-by: Paolo Abeni <pabeni@redhat.com> |
||
|
Linus Torvalds
|
1c59d38339 |
linux-kselftest-nolibc-6.6-rc1
This nolibc update for Linux 6.6-rc1 consists of:
Nolibc:
- improved portability by removing build errors with -ENOSYS
- added syscall6() on MIPS to support pselect6() and mmap()
- added setvbuf(), rmdir(), pipe(), pipe2()
- add support for ppc/ppc64
- environ is no longer optional
- fixed frame pointer issues at -O0
- dropped sys_stat() in favor of sys_statx()
- centralized _start_c() to remove lots of asm code
- switched size_t to __SIZE_TYPE__
Selftests:
- improved status reporting (success/warning/failure counts,
path to log file)
- various code cleanups (indent, unused variables, ...)
- more consistent test numbering
- enabled compiler warnings
- dropped unreliable chmod_net test
- improved reliability (create /dev/zero & /tmp, rely less on /proc)
- new tests (brk/sbrk/mmap/munmap)
- improved compatibility with musl
- new run-nolibc-test target to build and run natively
- new run-libc-test target to build and run against native libc
- made the cmdline parser more reliable against boolean arguments
- dropped dependency on memfd for vfprintf() test
- nolibc-test is no longer stripped
- added support for extending ARCH via XARCH
Other:
- add Thomas as co-maintainer
-----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEEPZKym/RZuOCGeA/kCwJExA0NQxwFAmTs4xUACgkQCwJExA0N
QxyVjg//XGpM5P8JXfn2lsLXa+vPOkIKCY26RRTLUb8TJygTLpQY/aOh98pKCGbr
naudKubMLlhYhS7HSJXvH6rNkidsU7YiW8RTbHICHsB1Lqbqic2C8y34EOBJpalN
mYfidcwVdmUeJLBEiL5W4T5ip2FIHy5lhN4NeN7x0bHBkcXvkzL8/7QngjPB7Nmy
ibyPmtv/1m83+jmAOzDgNHJPIc0utjGynkKWBAd7SWClCWvS+22V5YgqCHaXN+1R
5RMDlJ+AqknniEmUouF7qfsbAI02uhKy8Gpmju6ghLjqN/4V3NNSuftXXT+x1L+x
L277L5s/RNfaXgzaXoUfIdnFeHhDhL0dJxBek/5LZdCy4rQWbn3VN1VI1NtGDnM1
BTHdDNirqxkKsXleSi3zXQptxvGLeP/E0loNd74ZlmOqNhZdt3bQdv53evDBSjGa
UvCfGC3r+AyKsxzXUbz+fPuQ+9yw5g1VJBKMol7lbiBmmYb3y7nXj2nPTkRU84Ge
twRo2ctF62a2d9hw/U/D7hFGYnzOosl3NmbrzAKWAGqXQ5jpWPbfeU/7bjVeW7d1
cuTGJtPHSVtCTaMnktHT+F9+Uh9SOFtUj/WMESvu6Y7iQRERqoXcHJuBhrms6r7S
DGKxHuVwopcuGXdNoKI/nyT4lApee33S5WcKMV2t85eoXAfe4EY=
=OCH0
-----END PGP SIGNATURE-----
Merge tag 'linux-kselftest-nolibc-6.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
Pull nolibc updates from Shuah Khan:
"Nolibc:
- improved portability by removing build errors with -ENOSYS
- added syscall6() on MIPS to support pselect6() and mmap()
- added setvbuf(), rmdir(), pipe(), pipe2()
- add support for ppc/ppc64
- environ is no longer optional
- fixed frame pointer issues at -O0
- dropped sys_stat() in favor of sys_statx()
- centralized _start_c() to remove lots of asm code
- switched size_t to __SIZE_TYPE__
Selftests:
- improved status reporting (success/warning/failure counts, path to
log file)
- various code cleanups (indent, unused variables, ...)
- more consistent test numbering
- enabled compiler warnings
- dropped unreliable chmod_net test
- improved reliability (create /dev/zero & /tmp, rely less on /proc)
- new tests (brk/sbrk/mmap/munmap)
- improved compatibility with musl
- new run-nolibc-test target to build and run natively
- new run-libc-test target to build and run against native libc
- made the cmdline parser more reliable against boolean arguments
- dropped dependency on memfd for vfprintf() test
- nolibc-test is no longer stripped
- added support for extending ARCH via XARCH
Other:
- add Thomas as co-maintainer"
* tag 'linux-kselftest-nolibc-6.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest: (103 commits)
tools/nolibc: avoid undesired casts in the __sysret() macro
tools/nolibc: keep brk(), sbrk(), mmap() away from __sysret()
tools/nolibc: silence ppc64 compile warnings
selftests/nolibc: libc-test: use HOSTCC instead of CC
tools/nolibc: stackprotector.h: make __stack_chk_init static
selftests/nolibc: allow report with existing test log
selftests/nolibc: add test support for ppc64
selftests/nolibc: add test support for ppc64le
selftests/nolibc: add test support for ppc
selftests/nolibc: add XARCH and ARCH mapping support
tools/nolibc: add support for powerpc64
tools/nolibc: add support for powerpc
MAINTAINERS: nolibc: add myself as co-maintainer
selftests/nolibc: enable compiler warnings
selftests/nolibc: don't strip nolibc-test
selftests/nolibc: prevent out of bounds access in expect_vfprintf
selftests/nolibc: use correct return type for read() and write()
selftests/nolibc: avoid sign-compare warnings
selftests/nolibc: avoid unused parameter warnings
selftests/nolibc: make functions static if possible
...
|
||
|
Linus Torvalds
|
815c24a085 |
linux-kselftest-kunit-6.6-rc1
This kunit update for Linux 6.6.rc1 consists of:
-- Adds support for running Rust documentation tests as KUnit tests
-- Makes init, str, sync, types doctests compilable/testable
-- Adds support for attributes API which include speed, modules
attributes, ability to filter and report attributes.
-- Adds support for marking tests slow using attributes API.
-- Adds attributes API documentation
-- Fixes to wild-memory-access bug in kunit_filter_suites() and
a possible memory leak in kunit_filter_suites()
-- Adds support for counting number of test suites in a module, list
action to kunit test modules, and test filtering on module tests.
-----BEGIN PGP SIGNATURE-----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=Nsb8
-----END PGP SIGNATURE-----
Merge tag 'linux-kselftest-kunit-6.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
Pull kunit updates from Shuah Khan:
- add support for running Rust documentation tests as KUnit tests
- make init, str, sync, types doctests compilable/testable
- add support for attributes API which include speed, modules
attributes, ability to filter and report attributes
- add support for marking tests slow using attributes API
- add attributes API documentation
- fix a wild-memory-access bug in kunit_filter_suites() and a possible
memory leak in kunit_filter_suites()
- add support for counting number of test suites in a module, list
action to kunit test modules, and test filtering on module tests
* tag 'linux-kselftest-kunit-6.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest: (25 commits)
kunit: fix struct kunit_attr header
kunit: replace KUNIT_TRIGGER_STATIC_STUB maro with KUNIT_STATIC_STUB_REDIRECT
kunit: Allow kunit test modules to use test filtering
kunit: Make 'list' action available to kunit test modules
kunit: Report the count of test suites in a module
kunit: fix uninitialized variables bug in attributes filtering
kunit: fix possible memory leak in kunit_filter_suites()
kunit: fix wild-memory-access bug in kunit_filter_suites()
kunit: Add documentation of KUnit test attributes
kunit: add tests for filtering attributes
kunit: time: Mark test as slow using test attributes
kunit: memcpy: Mark tests as slow using test attributes
kunit: tool: Add command line interface to filter and report attributes
kunit: Add ability to filter attributes
kunit: Add module attribute
kunit: Add speed attribute
kunit: Add test attributes API structure
MAINTAINERS: add Rust KUnit files to the KUnit entry
rust: support running Rust documentation tests as KUnit ones
rust: types: make doctests compilable/testable
...
|
||
|
Linus Torvalds
|
5a31cc7297 |
linux-kselftest-next-6.6-rc1
This Kselftest update for Linux 6.6-rc1 consists of a mix of fixes, enhancements, and new tests. Bulk of the changes enhance and fix rseq and resctrl tests. In addition, user_events, dmabuf-heaps and perf_events are added to default kselftest build and test coverage. A futex test fix, enhance prctl test coverage, and minor fixes are included in this update. -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEPZKym/RZuOCGeA/kCwJExA0NQxwFAmTstk4ACgkQCwJExA0N QxxMWBAAlV9Ai38VFU/rGzCEIhgiXuLpHsonGqvKEGjZDWPxN004gMPEjyPyruPp YHMJUXsm3sqZRQimoPGB9vFXcdL2m3wYbUjaeRoqpFDjstmA0X1kGMshh+hteQxn PPF8Y8ZkTgzNU+ypt/1xF/Xdwyu+0xYEkKMHX2zkI87blVxUUt9CA84S8PjbKSXt JEQPGVlHAM4u881bGamUty/jbEbJpkuWXc7tMZfT2I5MT6gNwyOSs6bQwX2+XtBb IY+WdRbkl1/iz8BoFzfiIlMRobvsKyGIMBzPjM3GkypXKpqZfAjkw50ESOkErR2s MxHM6OjIRFnpvVmDQe+ZqfAWTysEeSrc1C01arn6voW7gdaPZaHhKgfS1egAVAbJ EY7R+eJsdLj9g0O3B6weC8PM//k+OPeyr8QMnn6npLpAAkit2oToO1SJx17c9ZpB 6j1YaG9tgxETaGJEcS7OC21BQTgBH/MF7ALdMyxZFsHTAP3THJde4vEWpl5hojWD y/24bx3ZdSr+rgyXqNd8Ewk/e/+2zsJF3g2HmaTwBTBERhA7/qGgmpodCjG+byIy koKua1qEcPCp7I+so23bQF8Wcf3EFzCT6ADid0P0/rVymjdPBQJl5GLbKTrUIo32 ZwDfIxL8Bu7XQBb3fJJzdLdkLUNAzFrR+y7FW7++TRI4Mr9oitg= =6fP4 -----END PGP SIGNATURE----- Merge tag 'linux-kselftest-next-6.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest Pull Kselftest updates from Shuah Khan: "A mix of fixes, enhancements, and new tests. Bulk of the changes enhance and fix rseq and resctrl tests. In addition, user_events, dmabuf-heaps and perf_events are added to default kselftest build and test coverage. A futex test fix, enhance prctl test coverage, and minor fixes are included in this update" * tag 'linux-kselftest-next-6.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest: (32 commits) selftests: cachestat: use proper syscall number macro selftests: cachestat: properly link in librt selftests/futex: Order calls to futex_lock_pi selftests: Hook more tests into the build infrastructure selftests/user_events: Reenable build selftests/filesystems: Add six consecutive 'x' characters to mktemp selftests/rseq: Use rseq_unqual_scalar_typeof in macros selftests/rseq: Fix arm64 buggy load-acquire/store-release macros selftests/rseq: Implement rseq_unqual_scalar_typeof selftests/rseq: Fix CID_ID typo in Makefile selftests:prctl: add set-process-name to .gitignore selftests:prctl: Fix make clean override warning selftests/resctrl: Remove test type checks from cat_val() selftests/resctrl: Pass the real number of tests to show_cache_info() selftests/resctrl: Move CAT/CMT test global vars to function they are used in selftests/resctrl: Don't use variable argument list for ->setup() selftests/resctrl: Don't pass test name to fill_buf selftests/resctrl: Improve parameter consistency in fill_buf selftests/resctrl: Remove unnecessary startptr global from fill_buf selftests/resctrl: Remove "malloc_and_init_memory" param from run_fill_buf() ... |
||
|
Linus Torvalds
|
36534782b5 |
Thermal control updates for 6.6-rc1
- Make the ACPI thermal driver use its own Notify() handler (Michal
Wilczynski).
- Rework the ACPI thermal driver to use a table of generic trip point
structures on top of the internal representation of trip points and
remove thermal zone callbacks that are not necessary any more from
that driver (Rafael Wysocki).
- Fix a few issues in the Intel DTS IOSF thermal driver, clean up code
in it and make it pass tables of generic trip point structures to the
core during thermal zone registration (Rafael Wysocki).
- Drop a redundant check from the Intel DTS IOSF thermal driver's
"remove" routine (Zhang Rui).
- Use module_platform_driver() to replace an open-coded counterpart of
it in the int340x thermal driver (Yang Yingliang).
- Fix possible uninitialized value access in __thermal_of_bind() and
__thermal_of_unbind() (Peng Fan).
- Make the int3400 driver use thermal zone device wrappers (Daniel
Lezcano).
- Remove redundant thermal zone state check from the int340x thermal
driver (Daniel Lezcano).
- Drop non-functional nocrt parameter from ACPI thermal (Mario
Limonciello).
- Explicitly include correct DT includes in the thermal core and
drivers (Rob Herring).
-----BEGIN PGP SIGNATURE-----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=fHwc
-----END PGP SIGNATURE-----
Merge tag 'thermal-6.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull thermal control updates from Rafael Wysocki:
"These rework the Intel DTS IOSF and the ACPI thermal drivers to pass
tables of generic trip point structures to the core during
initialization and make some requisite modifications in the thermal
core, fix a few issues elsewhere and clean up code.
This includes changes that are present in the ACPI updates too,
because they involve both ACPI and the thermal core. The list of
specific changes below is limited to thermal control, however.
Specifics:
- Make the ACPI thermal driver use its own Notify() handler (Michal
Wilczynski)
- Rework the ACPI thermal driver to use a table of generic trip point
structures on top of the internal representation of trip points and
remove thermal zone callbacks that are not necessary any more from
that driver (Rafael Wysocki)
- Fix a few issues in the Intel DTS IOSF thermal driver, clean up
code in it and make it pass tables of generic trip point structures
to the core during thermal zone registration (Rafael Wysocki)
- Drop a redundant check from the Intel DTS IOSF thermal driver's
"remove" routine (Zhang Rui)
- Use module_platform_driver() to replace an open-coded counterpart
of it in the int340x thermal driver (Yang Yingliang)
- Fix possible uninitialized value access in __thermal_of_bind() and
__thermal_of_unbind() (Peng Fan)
- Make the int3400 driver use thermal zone device wrappers (Daniel
Lezcano)
- Remove redundant thermal zone state check from the int340x thermal
driver (Daniel Lezcano)
- Drop non-functional nocrt parameter from ACPI thermal (Mario
Limonciello)
- Explicitly include correct DT includes in the thermal core and
drivers (Rob Herring)"
* tag 'thermal-6.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
thermal: intel: intel_soc_dts_iosf: Remove redundant check
thermal: intel: int340x: simplify the code with module_platform_driver()
thermal/of: Fix potential uninitialized value access
thermal: intel: intel_soc_dts_iosf: Use struct thermal_trip
thermal: intel: intel_soc_dts_iosf: Rework critical trip setup
thermal: intel: intel_soc_dts_iosf: Add helper for resetting trip points
thermal: intel: intel_soc_dts_iosf: Change initialization ordering
thermal: intel: intel_soc_dts_iosf: Pass sensors to update_trip_temp()
thermal: intel: intel_soc_dts_iosf: Untangle update_trip_temp()
thermal: intel: intel_soc_dts_iosf: Always assume notification support
thermal: intel: intel_soc_dts_iosf: Drop redundant symbol definition
thermal: intel: intel_soc_dts_iosf: Always use 2 trips
thermal: Explicitly include correct DT includes
thermal/drivers/int340x: Do not check the thermal zone state
thermal/drivers/int3400: Use thermal zone device wrappers
|
||
|
Linus Torvalds
|
ccc5e98177 |
Power management updates for 6.6-rc1
- Rework the menu and teo cpuidle governors to avoid calling
tick_nohz_get_sleep_length(), which is likely to become quite
expensive going forward, too often and improve making decisions
regarding whether or not to stop the scheduler tick in the teo
governor (Rafael Wysocki).
- Improve the performance of cpufreq_stats_create_table() in some
cases (Liao Chang).
- Fix two issues in the amd-pstate-ut cpufreq driver (Swapnil Sapkal).
- Use clamp() helper macro to improve the code readability in
cpufreq_verify_within_limits() (Liao Chang).
- Set stale CPU frequency to minimum in intel_pstate (Doug Smythies).
- Migrate cpufreq drivers for various platforms to use void remove
callback (Yangtao Li).
- Add online/offline/exit hooks for Tegra driver (Sumit Gupta).
- Explicitly include correct DT includes in cpufreq (Rob Herring).
- Frequency domain updates for qcom-hw driver (Neil Armstrong).
- Modify AMD pstate driver return the highest_perf value (Meng Li).
- Generic cleanups for cppc, mediatek and powernow driver (Liao Chang,
Konrad Dybcio).
- Add more platforms to cpufreq-arm driver's blocklist (AngeloGioacchino
Del Regno and Konrad Dybcio).
- brcmstb-avs-cpufreq: Fix -Warray-bounds bug (Gustavo A. R. Silva).
- Add device PM helpers to allow a device to remain powered-on during
system-wide transitions (Ulf Hansson).
- Rework hibernation memory snapshotting to avoid storing pages filled
with zeros in hibernation image files (Brian Geffon).
- Add check to make sure that CPU latency QoS constraints do not use
negative values (Clive Lin).
- Optimize rp->domains memory allocation in the Intel RAPL power
capping driver (xiongxin).
- Remove recursion while parsing zones in the arm_scmi power capping
driver (Cristian Marussi).
- Fix memory leak in devfreq_dev_release() (Boris Brezillon).
- Rewrite devfreq_monitor_start() kerneldoc comment (Manivannan
Sadhasivam).
- Explicitly include correct DT includes in devfreq (Rob Herring).
- Remove unsued pm_runtime_update_max_time_suspended() extern
declaration (YueHaibing).
- Add turbo-boost support to cpupower (Wyes Karny).
- Add support for amd_pstate mode change to cpupower (Wyes Karny).
- Fix 'cpupower idle_set' command to accept only numeric values of
arguments (Likhitha Korrapati).
- Clean up OPP code and add new frequency related APIs to it (Viresh
Kumar, Manivannan Sadhasivam).
- Convert ti cpufreq/opp bindings to json schema (Nishanth Menon).
-----BEGIN PGP SIGNATURE-----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=6BIh
-----END PGP SIGNATURE-----
Merge tag 'pm-6.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management updates from Rafael Wysocki:
"These rework cpuidle governors to call tick_nohz_get_sleep_length()
less often and fix one of them, rework hibernation to avoid storing
pages filled with zeros in hibernation images, switch over some
cpufreq drivers to use void remove callbacks, fix and clean up
multiple cpufreq drivers, fix the devfreq core, update the cpupower
utility and make other assorted improvements.
Specifics:
- Rework the menu and teo cpuidle governors to avoid calling
tick_nohz_get_sleep_length(), which is likely to become quite
expensive going forward, too often and improve making decisions
regarding whether or not to stop the scheduler tick in the teo
governor (Rafael Wysocki)
- Improve the performance of cpufreq_stats_create_table() in some
cases (Liao Chang)
- Fix two issues in the amd-pstate-ut cpufreq driver (Swapnil Sapkal)
- Use clamp() helper macro to improve the code readability in
cpufreq_verify_within_limits() (Liao Chang)
- Set stale CPU frequency to minimum in intel_pstate (Doug Smythies)
- Migrate cpufreq drivers for various platforms to use void remove
callback (Yangtao Li)
- Add online/offline/exit hooks for Tegra driver (Sumit Gupta)
- Explicitly include correct DT includes in cpufreq (Rob Herring)
- Frequency domain updates for qcom-hw driver (Neil Armstrong)
- Modify AMD pstate driver return the highest_perf value (Meng Li)
- Generic cleanups for cppc, mediatek and powernow driver (Liao
Chang, Konrad Dybcio)
- Add more platforms to cpufreq-arm driver's blocklist
(AngeloGioacchino Del Regno and Konrad Dybcio)
- brcmstb-avs-cpufreq: Fix -Warray-bounds bug (Gustavo A. R. Silva)
- Add device PM helpers to allow a device to remain powered-on during
system-wide transitions (Ulf Hansson)
- Rework hibernation memory snapshotting to avoid storing pages
filled with zeros in hibernation image files (Brian Geffon)
- Add check to make sure that CPU latency QoS constraints do not use
negative values (Clive Lin)
- Optimize rp->domains memory allocation in the Intel RAPL power
capping driver (xiongxin)
- Remove recursion while parsing zones in the arm_scmi power capping
driver (Cristian Marussi)
- Fix memory leak in devfreq_dev_release() (Boris Brezillon)
- Rewrite devfreq_monitor_start() kerneldoc comment (Manivannan
Sadhasivam)
- Explicitly include correct DT includes in devfreq (Rob Herring)
- Remove unsued pm_runtime_update_max_time_suspended() extern
declaration (YueHaibing)
- Add turbo-boost support to cpupower (Wyes Karny)
- Add support for amd_pstate mode change to cpupower (Wyes Karny)
- Fix 'cpupower idle_set' command to accept only numeric values of
arguments (Likhitha Korrapati)
- Clean up OPP code and add new frequency related APIs to it (Viresh
Kumar, Manivannan Sadhasivam)
- Convert ti cpufreq/opp bindings to json schema (Nishanth Menon)"
* tag 'pm-6.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (74 commits)
cpufreq: tegra194: remove opp table in exit hook
cpufreq: powernow-k8: Use related_cpus instead of cpus in driver.exit()
cpufreq: tegra194: add online/offline hooks
cpuidle: teo: Avoid unnecessary variable assignments
cpufreq: qcom-cpufreq-hw: add support for 4 freq domains
dt-bindings: cpufreq: qcom-hw: add a 4th frequency domain
cpufreq: amd-pstate-ut: Fix kernel panic when loading the driver
cpufreq: amd-pstate-ut: Remove module parameter access
cpufreq: Use clamp() helper macro to improve the code readability
PM: sleep: Add helpers to allow a device to remain powered-on
PM: QoS: Add check to make sure CPU latency is non-negative
PM: runtime: Remove unsued extern declaration of pm_runtime_update_max_time_suspended()
cpufreq: intel_pstate: set stale CPU frequency to minimum
cpufreq: stats: Improve the performance of cpufreq_stats_create_table()
dt-bindings: cpufreq: Convert ti-cpufreq to json schema
dt-bindings: opp: Convert ti-omap5-opp-supply to json schema
OPP: Fix argument name in doc comment
cpuidle: menu: Skip tick_nohz_get_sleep_length() call in some cases
cpufreq: cppc: Set fie_disabled to FIE_DISABLED if fails to create kworker_fie
cpufreq: cppc: cppc_cpufreq_get_rate() returns zero in all error cases.
...
|