- New board support: i.MX8DXL EVK, Kontron SL/BL i.MX8MM OSM-S, i.MX8MM
Gateworks GW7904, MSC SM2S-IMX8PLUS SoM and carrier board, NXP
LS2081ARDB.
- Update i.MX8MQ device tree to use generic name 'dma-controller' for
SDMA.
- A number of i.MX8ULP device tree improvements and updates: correct
parent clock of LPI2C & LPSPI, increase the clock speed of LPSPI, add
PMU and mailbox device, drop undocumented CGC property, enable FEC, etc.
- Add interconnect property for various i.MX8MP blk-ctrl devices.
- Enable VPU PGC, blk-ctrl and PCIe support for i.MX8MP SoC.
- A set of changes from Peng Fan to add various devices for i.MX93 SoC,
including MU, blk-ctrl, PMU, LPI2C, LPSPI, SRC, etc.
- Two set of changes to update LS1043A and LS1046A device trees on
various aspects, including USB3, PCIe, DMA, mdio-mux, QSPI Flash, etc.
- Board imx8mq-librem5 update: add USB role switching, add RGB PWM
notification LEDs, add voice coil motor for focus control, fix MIPI_CSI
description.
- A series from Frieder Schrempf to improve imx8mm-kontron device trees
for VSELECT switch, DDRC operating point, SPI NOR partition layout etc.
- A set of display and PMIC related additions and improvements on
imx8mm-verdin board.
- A number of i.MX8M Plus DHCOM PDK2 device tree improvments from Marek
Vasut.
- A few imx8mp-venice device tree updates on USB, cpufreq and WiFi/BT.
- A series from Vladimir Oltean to enable multiple switch CPU ports
support.
- Other small and random board specific updates.
-----BEGIN PGP SIGNATURE-----
iQFIBAABCgAyFiEEFmJXigPl4LoGSz08UFdYWoewfM4FAmMm4WcUHHNoYXduZ3Vv
QGtlcm5lbC5vcmcACgkQUFdYWoewfM616ggApJ4zHHQQovmdWWYa6XH471LQGxZ4
HNw1Pui4imStowaPvyiRFcjr8wrQMGQ59NAQV4vVqX3p+xoeb/3ICO1h2cx8kosE
9YkBU0AqbgcFuiXRb4lOHqzy8D/ZGH1N/A8xASgUkTVSQDMCNyPucA7Xc5+EULDo
RmnicFCeF85j/mXy/IBVkXJwV/aH9RqF1HUwjYRAR/GE7yLCWMSwRfDhECCkjfqw
ypkTeYEkaubnZzFY1QWguOG9/x+TZ+VdMzOsRosfzFOowsC1SrurK5rm+DdVBoAJ
p5z7GumhY5kfFLBbScvtvR/HGF3YNyekHmaGm6xExhzZuhcy3fVLhsGRhg==
=sWBW
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=S7Rl
-----END PGP SIGNATURE-----
Merge tag 'imx-dt64-6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/dt
i.MX arm64 device tree change for 6.1:
- New board support: i.MX8DXL EVK, Kontron SL/BL i.MX8MM OSM-S, i.MX8MM
Gateworks GW7904, MSC SM2S-IMX8PLUS SoM and carrier board, NXP
LS2081ARDB.
- Update i.MX8MQ device tree to use generic name 'dma-controller' for
SDMA.
- A number of i.MX8ULP device tree improvements and updates: correct
parent clock of LPI2C & LPSPI, increase the clock speed of LPSPI, add
PMU and mailbox device, drop undocumented CGC property, enable FEC, etc.
- Add interconnect property for various i.MX8MP blk-ctrl devices.
- Enable VPU PGC, blk-ctrl and PCIe support for i.MX8MP SoC.
- A set of changes from Peng Fan to add various devices for i.MX93 SoC,
including MU, blk-ctrl, PMU, LPI2C, LPSPI, SRC, etc.
- Two set of changes to update LS1043A and LS1046A device trees on
various aspects, including USB3, PCIe, DMA, mdio-mux, QSPI Flash, etc.
- Board imx8mq-librem5 update: add USB role switching, add RGB PWM
notification LEDs, add voice coil motor for focus control, fix MIPI_CSI
description.
- A series from Frieder Schrempf to improve imx8mm-kontron device trees
for VSELECT switch, DDRC operating point, SPI NOR partition layout etc.
- A set of display and PMIC related additions and improvements on
imx8mm-verdin board.
- A number of i.MX8M Plus DHCOM PDK2 device tree improvments from Marek
Vasut.
- A few imx8mp-venice device tree updates on USB, cpufreq and WiFi/BT.
- A series from Vladimir Oltean to enable multiple switch CPU ports
support.
- Other small and random board specific updates.
* tag 'imx-dt64-6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: (90 commits)
arm64: dts: ls1046a-qds: Modify the qspi flash frequency
arm64: dts: ls1046a-qds: add mmio based mdio-mux nodes for FPGA
arm64: dts: ls1046a: add gpios based i2c recovery information
arm64: dts: ls1046a: use a pseudo-bus to constrain usb and sata dma size
arm64: dts: ls1046a: make dma-coherent global to the SoC
arm64: dts: ls1046a: add missing dma ranges property
arm64: dts: ls1046a: Add big-endian property for PCIe nodes
arm64: dts: ls1046a: Add the PME interrupt and big-endian to PCIe EP nodes
arm64: dts: ls1046a: Enable usb3-lpm-capable for usb3 node
arm64: dts: ls1043a-rdb: add pcf85263 rtc node
arm64: dts: ls1043a-qds: add mmio based mdio-mux support
arm64: dts: ls1043a: use a pseudo-bus to constrain usb and sata dma size
arm64: dts: ls1043a: add gpio based i2c recovery information
arm64: dts: ls1043a: make dma-coherent global to the SoC
arm64: dts: ls1043a: add missing dma ranges property
arm64: dts: ls1043a: Add big-endian property for PCIe nodes
arm64: dts: ls1043a: Add SCFG phandle for PCIe nodes
arm64: dts: ls1043a: use pcie aer/pme interrupts
arm64: dts: ls1043a: Enable usb3-lpm-capable for usb3 node
arm64: dts: ls1043a: fix the wrong size of dcfg space
...
Link: https://lore.kernel.org/r/20220918092806.2152700-4-shawnguo@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
- A series from Alexander Stein to add missing properties for i.MX6 SRAM.
- Drop 'interrupts' property when 'interrupts-extended' is present. This
fixes a dtbs_check warning with i.MX6 DT.
- Update device trees to use generic name 'dma-controller' for SDMA.
- A set of changes from Krzysztof Kozlowski to align SPI, LED and
gpio-keys node name with dtschema.
- A series of indentation and white-space cleanups from Marcel Ziswiler
to address various checkpatch warnings.
- Add DDR pinmux defines to VF610 DT header.
- A couple of changes from Peng Fan to update clock-names and add IPG
clock for i.MX7ULP LPI2C devices.
- Improve device tree structure for Kontron i.MX6UL/ULL based boards.
- A series of changes from Tim Harvey to add CAN regulator for Gateworks
i.MX6QDL boards.
- Various small and random board specific updates.
-----BEGIN PGP SIGNATURE-----
iQFIBAABCgAyFiEEFmJXigPl4LoGSz08UFdYWoewfM4FAmMmkqkUHHNoYXduZ3Vv
QGtlcm5lbC5vcmcACgkQUFdYWoewfM5jrAf+K3D9RtMWlGY1zrqv6QLWgBbeNaBt
wtICvLyaaypcPqZ/WzgfgMgJf9tUwDzkrzewyRqG4aHBQvY0xOlwvUFH/OA2C4mA
K0/FYR6GK4rIlZpOW1Rkj3K0U0GrtxUsF9uXLFhQShJWWVn+gpjZmcZ3hEVwRyIR
eNEKsMmwV0UZhT1JZYZ/U+sQD8yfaNPLLVM+doLwcavQavNGQyDRLdpAZ6AuMANz
SckcGC4tI3mkPsTBweshemSDe14XILrnDgei1429AfLd+vb48l9FPUF5/oOKJRt7
Zb1uQmXfCwyUJx7pU3tJZBUHAAGqsupniYtpxYxH8PL46lSulmSDpnMLyA==
=wloQ
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=7v6C
-----END PGP SIGNATURE-----
Merge tag 'imx-dt-6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/dt
i.MX device tree change for 6.1
- A series from Alexander Stein to add missing properties for i.MX6 SRAM.
- Drop 'interrupts' property when 'interrupts-extended' is present. This
fixes a dtbs_check warning with i.MX6 DT.
- Update device trees to use generic name 'dma-controller' for SDMA.
- A set of changes from Krzysztof Kozlowski to align SPI, LED and
gpio-keys node name with dtschema.
- A series of indentation and white-space cleanups from Marcel Ziswiler
to address various checkpatch warnings.
- Add DDR pinmux defines to VF610 DT header.
- A couple of changes from Peng Fan to update clock-names and add IPG
clock for i.MX7ULP LPI2C devices.
- Improve device tree structure for Kontron i.MX6UL/ULL based boards.
- A series of changes from Tim Harvey to add CAN regulator for Gateworks
i.MX6QDL boards.
- Various small and random board specific updates.
* tag 'imx-dt-6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: (40 commits)
ARM: dts: imx6qdl-gw54xx: add CAN regulator
ARM: dts: imx6qdl-gw53xx: add CAN regulator
ARM: dts: imx6qdl-gw52xx: add CAN regulator
ARM: dts: imx: update sdma node name format
ARM: dts: imx6: skov: migrate to resistive-adc-touch
ARM: dts: imx6sx-udoo-neo: don't use multiple blank lines
ARM: dts: imx6sl: use tabs for code indent
ARM: dts: imx6sx: add missing properties for sram
ARM: dts: imx6sll: add missing properties for sram
ARM: dts: imx6sl: add missing properties for sram
ARM: dts: imx6qp: add missing properties for sram
ARM: dts: imx6dl: add missing properties for sram
ARM: dts: imx6q: add missing properties for sram
ARM: dts: imx7ulp: Add IPG clock for lpi2c
ARM: dts: imx7ulp: update the LPI2C clock-names
ARM: dts: vf610: ddr pinmux
ARM: dts: imx6qdl-dhcom: Move IPU iomux node from PDK2 to SoM file
ARM: dts: imx6ul-kontron: Add imx6ull-kontron-bl to Makefile
ARM: dts: imx6ul-kontron: Simplify devicetree structure
ARM: dts: vf610: align SPI node name with dtschema
...
Link: https://lore.kernel.org/r/20220918092806.2152700-3-shawnguo@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
These changes enable PCI, Ethernet and HDA support on Jetson AGX Orin.
DMA support is enabled for I2C on a number of SoC generations and the
Google Pixel C (a.k.a. Smaug) device receives Bluetooth and Wi-Fi
support.
Other than that this also contains some minor cleanups and fixes.
-----BEGIN PGP SIGNATURE-----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=hMuy
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=fOSZ
-----END PGP SIGNATURE-----
Merge tag 'tegra-for-6.1-arm64-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into arm/dt
arm64: tegra: Device tree changes for v6.1-rc1
These changes enable PCI, Ethernet and HDA support on Jetson AGX Orin.
DMA support is enabled for I2C on a number of SoC generations and the
Google Pixel C (a.k.a. Smaug) device receives Bluetooth and Wi-Fi
support.
Other than that this also contains some minor cleanups and fixes.
* tag 'tegra-for-6.1-arm64-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
arm64: tegra: Add GPCDMA support for Tegra I2C
arm64: tegra: Add iommus for HDA on Tegra234
arm64: tegra: Enable HDA node for Jetson AGX Orin
arm64: tegra: Add context isolation domains on Tegra234
arm64: tegra: Fixup iommu-map property formatting
arm64: dts: tegra: smaug: Add Wi-Fi node
arm64: dts: tegra: smaug: Add Bluetooth node
arm64: tegra: Enable MGBE on Jetson AGX Orin Developer Kit
arm64: tegra: Add MGBE nodes on Tegra234
arm64: tegra: Fix up compatible for Tegra234 GPCDMA
arm64: tegra: Enable PCIe slots in P3737-0000 board
arm64: tegra: Add P2U and PCIe controller nodes to Tegra234 DT
arm64: tegra: Add regulators required for PCIe
Link: https://lore.kernel.org/r/20220916101957.1635854-5-thierry.reding@gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Adds device tree bindings for the MGBE found on Tegra234 SoCs, as well
as stream IDs for the shared host1x context devices.
-----BEGIN PGP SIGNATURE-----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=fXO9
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=PY4Y
-----END PGP SIGNATURE-----
Merge tag 'tegra-for-6.1-dt-bindings' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into arm/dt
dt-bindings: Changes for v6.1-rc1
Adds device tree bindings for the MGBE found on Tegra234 SoCs, as well
as stream IDs for the shared host1x context devices.
* tag 'tegra-for-6.1-dt-bindings' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
dt-bindings: Add Host1x context stream IDs on Tegra234
dt-bindings: net: Add Tegra234 MGBE
Link: https://lore.kernel.org/r/20220916101957.1635854-4-thierry.reding@gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Range size of 0x2b4 was incorrect since there isn't 173 configurable
pins for muxing. Additionally there is a non-addressable region in the
mapping which requires splitting into two ranges.
main_pmx0 -> 67 pins
main_pmx1 -> 3 pins
Fixes: d361ed8845 ("arm64: dts: ti: Add support for J7200 SoC")
Signed-off-by: Matt Ranostay <mranostay@ti.com>
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
Tested-by: Vaishnav Achath <vaishnav.a@ti.com>
Link: https://lore.kernel.org/r/20220919205723.8342-1-mranostay@ti.com
Move including the rzg2ul-smarc-som.dtsi from the carrier board
rzg2ul-smarc.dtsi to the actual RZ/G2UL SMARC EVK board dts
r9a07g043u11-smarc.dts. Also move the SW_SW0_DEV_SEL and
SW_ET0_EN_N macros to board dts as they are used by SoM and carrier
board DTS/I.
This is in preparation of re-using the SoM and carrier board DTSIs
for RZ/Five SMARC EVK.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Link: https://lore.kernel.org/r/20220915165256.352843-2-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
make dtbs_check:
usb-phy@e6590100: '#phy-cells' is a required property
From schema: dtschema/schemas/phy/phy-provider.yaml
The R-Car Gen2 USB PHY device nodes do not represent USB PHYs
theirselves, and thus do not have "#phy-cells" properties. Fix the
warning by renaming them from "usb-phy" to "usb-phy-controller".
Rename their child nodes from "usb-channel" to "usb-phy", as these do
represent USB PHYs.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Link: https://lore.kernel.org/r/6442b4042e26537abc8632c4772f8201685f1f1f.1663165098.git.geert+renesas@glider.be
Despite the name, R-Car V3U is the first member of the R-Car Gen4
family. Hence update the compatible properties in various device nodes
to include family-specific compatible values for R-Car Gen4 instead of
R-Car Gen3:
- CMT,
- SDHI.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Link: https://lore.kernel.org/r/f14fde21270bf8269a61a75fc6e50af2765f2a42.1663164707.git.geert+renesas@glider.be
This patch adds missing bootargs for R-Car S4 Spider board.
One note is that current Spider board doesn't have Ethernet
support yet, but this patch adds standard settings for it, too.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87leqo58ox.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
The serial console and serial debug ports on Spider are located on the
CPU board. Hence move the aliases and chosen nodes containing serial
port configuration from the main Spider DTS file to the DTS file that
describes the CPU board.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Link: https://lore.kernel.org/r/c03500bb10eae10caeb3f4f97bc979eeee6cce75.1663167551.git.geert+renesas@glider.be
D1 needs to export a register for managing some LDO regulators, so it
needs a unique compatible.
Signed-off-by: Samuel Holland <samuel@sholland.org>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Link: https://lore.kernel.org/r/20220815041248.53268-3-samuel@sholland.org
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Use enumerations where appropriate to combine "const" choices and
deduplicate fallback compatible strings.
Suggested-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Samuel Holland <samuel@sholland.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
Link: https://lore.kernel.org/r/20220815041248.53268-2-samuel@sholland.org
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
It contains:
- new SAMA5D3 based board, namely SAMA5D3-EDS
- adjustments to pass the DT binding validations
- disable AES on some LAN966 based boards as they are reserverd by
secure OS
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQTsZ8eserC1pmhwqDmejrg/N2X7/QUCYyQybAAKCRCejrg/N2X7
/R+wAQCDcL8RVW4opVAOjDkMOCnVxq8M+pjx+jVOnIPIRsGnNwEAxZ9sX5gP8HM3
ygUF/qoc3bUxXAN/YH6HfWIpYszV8wY=
=9Ge/
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=49Pi
-----END PGP SIGNATURE-----
Merge tag 'at91-dt-6.1-2' of https://git.kernel.org/pub/scm/linux/kernel/git/at91/linux into arm/dt
AT91 DT for v6.1 #2
It contains:
- new SAMA5D3 based board, namely SAMA5D3-EDS
- adjustments to pass the DT binding validations
- disable AES on some LAN966 based boards as they are reserverd by
secure OS
* tag 'at91-dt-6.1-2' of https://git.kernel.org/pub/scm/linux/kernel/git/at91/linux:
spi: dt-bindings: atmel,at91rm9200-spi: Add DMA related properties
ARM: dts: at91: Add `atmel,usart-mode` required property to serial nodes
ARM: dts: at91: sam9x60ek: Add DBGU compatibles to uart1
ARM: dts: at91: sama7g5: Swap rx and tx for spi11
dts: arm: at91: Add SAMA5D3-EDS Board
dt-bindings: arm: at91: Add info on SAMA5D3-EDS
ARM: dts: lan966x: disable aes
Link: https://lore.kernel.org/r/20220916105407.1287452-1-claudiu.beznea@microchip.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The qspi flash in ls1046a QDS board can operate at 50MHz frequency.
Therefore, update the maximum supported freq in dts file.
Signed-off-by: Pankaj Bansal <pankaj.bansal@nxp.com>
Signed-off-by: Li Yang <leoyang.li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
There is mmio based mdio mux function in the FPGA device on ls1046a-qds
board. Add the mmio based mdio-mux nodes to ls1043a-qds boards and
add simple-mfd as a compatbile for the FPGA node to reflect the
multi-function nature of it.
Signed-off-by: Camelia Groza <camelia.groza@nxp.com>
Signed-off-by: Pankaj Bansal <pankaj.bansal@nxp.com>
Signed-off-by: Li Yang <leoyang.li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Add scl-gpios property for i2c recovery and add SoC specific
compatible string for SoC specific fixup.
Signed-off-by: Zhang Ying <ying.zhang22455@nxp.com>
Signed-off-by: Li Yang <leoyang.li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Wrap the usb and sata controllers in an intermediate simple-bus and use
it to constrain the dma address size of these usb controllers to the 40
bits that they generate toward the interconnect. This is required
because the SoC uses 48 bits address sizes and this mismatch would lead
to smmu context faults because the usb generates 40-bit addresses while
the smmu page tables are populated with 48-bit wide addresses.
Suggested-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Laurentiu Tudor <laurentiu.tudor@nxp.com>
Signed-off-by: Li Yang <leoyang.li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
These SoCs are really completely dma coherent in their entirety so add
the dma-coherent property at the soc level in the device tree and drop
the instances where it's specifically added to a few select devices.
Signed-off-by: Laurentiu Tudor <laurentiu.tudor@nxp.com>
Signed-off-by: Li Yang <leoyang.li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
These chips have a 48-bit address size so make sure that the dma-ranges
reflects this. Otherwise the linux kernel's dma sub-system will set
the default dma masks to full 64-bit, badly breaking dmas.
Signed-off-by: Laurentiu Tudor <laurentiu.tudor@nxp.com>
Signed-off-by: Li Yang <leoyang.li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Add the PME interrupt porperty and big-endian property in PCIe EP nodes.
Signed-off-by: Xiaowei Bao <xiaowei.bao@nxp.com>
Signed-off-by: Li Yang <leoyang.li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Enable USB3 HW LPM feature for ls1046a.
Signed-off-by: Ran Wang <ran.wang_1@nxp.com>
Signed-off-by: Li Yang <leoyang.li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Add the missing node for rtc device under i2c and fix style problems at
the same time.
Signed-off-by: Li Yang <leoyang.li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
There is mmio based mdio mux function in the FPGA device on ls1043a-qds
board. Add the mmio based mdio-mux nodes to ls1043a-qds boards and
add simple-mfd as a compatbile for the FPGA node to reflect the
multi-function nature of it. Also connect the ethernet interfaces to
these phy interfaces.
Signed-off-by: Li Yang <leoyang.li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Wrap the usb and sata controllers in an intermediate simple-bus and use
it to constrain the dma address size of these usb controllers to the 40
bits that they generate toward the interconnect. This is required
because the SoC uses 48 bits address sizes and this mismatch would lead
to smmu context faults because the usb generates 40-bit addresses while
the smmu page tables are populated with 48-bit wide addresses.
Suggested-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Laurentiu Tudor <laurentiu.tudor@nxp.com>
Signed-off-by: Li Yang <leoyang.li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Add scl-gpios property for i2c recovery and add SoC specific compatible
string for SoC specific fixup.
Signed-off-by: Zhang Ying <ying.zhang22455@nxp.com>
Signed-off-by: Li Yang <leoyang.li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
ls1043a is really completely dma coherent in their entirety so add the
dma-coherent property at the soc level in the device tree and drop the
instances where it's specifically added to a few select devices.
Signed-off-by: Laurentiu Tudor <laurentiu.tudor@nxp.com>
Signed-off-by: Li Yang <leoyang.li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
