Use the module_misc_device macro to simplify the code, which is the
same as declaring with module_init() and module_exit().
Signed-off-by: Li Zetao <lizetao1@huawei.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/20230815075944.1089298-3-lizetao1@huawei.com
Signed-off-by: Lee Jones <lee@kernel.org>
Use the module_led_trigger macro to simplify the code, which is the
same as declaring with module_init() and module_exit().
Signed-off-by: Li Zetao <lizetao1@huawei.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/20230815075944.1089298-2-lizetao1@huawei.com
Signed-off-by: Lee Jones <lee@kernel.org>
At least since the YAML conversion, the default-state property is
described in leds/common.yaml, so there's no need to point to another
file for its definition.
Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20230814163116.1696092-1-j.neuschaefer@gmx.net
Signed-off-by: Lee Jones <lee@kernel.org>
Do not lock driver mutex in the global LED panel brightness sysfs
accessors brightness_show() and brightness_store().
The mutex locking is unnecessary here. The I2C transfers are guarded by
I2C core locking mechanism, and the LED commands itself do not interfere
with other commands.
Fixes: 089381b27a ("leds: initial support for Turris Omnia LEDs")
Signed-off-by: Marek Behún <kabel@kernel.org>
Reviewed-by: Lee Jones <lee@kernel.org>
Link: https://lore.kernel.org/r/20230802160748.11208-2-kabel@kernel.org
Signed-off-by: Lee Jones <lee@kernel.org>
Use the dedicated sysfs_emit() function instead of sprintf() in sysfs
attribute accessor brightness_show().
Signed-off-by: Marek Behún <kabel@kernel.org>
Link: https://lore.kernel.org/r/20230802160748.11208-4-kabel@kernel.org
Signed-off-by: Lee Jones <lee@kernel.org>
Now that the driver core allows for struct class to be in read-only
memory, move the leds_class structure to be declared at build time
placing it into read-only memory, instead of having to be dynamically
allocated at boot time.
Suggested-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Ivan Orlov <ivan.orlov0322@gmail.com>
Link: https://lore.kernel.org/r/20230810174905.7997-1-ivan.orlov0322@gmail.com
Signed-off-by: Lee Jones <lee@kernel.org>
The driver depends on CONFIG_OF, so it is not necessary to use
of_match_ptr() here. We remove both CONFIG_OF and of_match_ptr() here.
Signed-off-by: Zhu Wang <wangzhu9@huawei.com>
Link: https://lore.kernel.org/r/20230808111108.24262-1-wangzhu9@huawei.com
Signed-off-by: Lee Jones <lee@kernel.org>
This is a gpio-controller, so gpio-line-names should be allowed as well.
pca9532 supports up to 16 GPIOs.
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230724063520.182888-2-alexander.stein@ew.tq-group.com
Signed-off-by: Lee Jones <lee@kernel.org>
The tty LED trigger uses the obsolete LED_ON & LED_OFF constants when
setting LED brightness. This is bad because the LED_ON constant is equal
to 1, and so when activating the tty LED trigger on a LED class device
with max_brightness greater than 1, the LED is dimmer than it can be
(when max_brightness is 255, the LED is very dimm indeed; some devices
translate 1/255 to 0, so the LED is OFF all the time).
Instead of directly setting brightness to a specific value, use the
led_blink_set_oneshot() function from LED core to configure the blink.
This function takes the current configured brightness as blink
brightness if not zero, and max brightness otherwise.
This also changes the behavior of the TTY LED trigger. Previously if
rx/tx stats kept changing, the LED was ON all the time they kept
changing. With this patch the LED will blink on TTY activity.
Fixes: fd4a641ac8 ("leds: trigger: implement a tty trigger")
Signed-off-by: Marek Behún <kabel@kernel.org>
Link: https://lore.kernel.org/r/20230802090753.13611-1-kabel@kernel.org
Signed-off-by: Lee Jones <lee@kernel.org>
select:false makes the schema basically ignored (not selected for given
compatible), unless some other binding references it. It's not really
useful nor needed for device bindings, even if they are part of other
binding (like MFD).
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Matti Vaittinen <mazziesaccount@gmail.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20230728171123.110489-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Lee Jones <lee@kernel.org>
At the time we call
BUG_ON(props.color == LED_COLOR_ID_MULTI);
the props variable is still initialized to zero.
Call the BUG_ON only after we parse fwnode into props.
Fixes: 77dce3a22e ("leds: disallow /sys/class/leds/*:multi:* for now")
Signed-off-by: Marek Behún <kabel@kernel.org>
Link: https://lore.kernel.org/r/20230801151623.30387-1-kabel@kernel.org
Signed-off-by: Lee Jones <lee@kernel.org>
Given channel intensity, LED brightness and max LED brightness, the
multicolor LED framework helper led_mc_calc_color_components() computes
the color channel brightness as
chan_brightness = brightness * chan_intensity / max_brightness
Consider the situation when (brightness, intensity, max_brightness) is
for example (16, 15, 255), then chan_brightness is computed to 0
although the fractional divison would give 0.94, which should be rounded
to 1.
Use DIV_ROUND_CLOSEST here for the division to give more realistic
component computation:
chan_brightness = DIV_ROUND_CLOSEST(brightness * chan_intensity,
max_brightness)
Fixes: 55d5d3b46b ("leds: multicolor: Introduce a multicolor class definition")
Signed-off-by: Marek Behún <kabel@kernel.org>
Link: https://lore.kernel.org/r/20230801124931.8661-1-kabel@kernel.org
Signed-off-by: Lee Jones <lee@kernel.org>
Grouping multiple monochrome LEDs into a multicolor LED device has a few
benefits over handling the group in user-space:
- The state of the LEDs relative to each other is consistent. In other
words, if 2 threads competes to set the LED to green and red, the
end-result cannot be black or yellow.
- The multicolor LED as a whole can be driven through the sysfs LED
interface.
Signed-off-by: Jean-Jacques Hiblot <jjhiblot@traphandler.com>
Reviewed-by: Lee Jones <lee@kernel.org>
Link: https://lore.kernel.org/r/20230728153731.3742339-5-jjhiblot@traphandler.com
Signed-off-by: Lee Jones <lee@kernel.org>
This allows to group multiple monochromatic LEDs into a multicolor
LED, e.g. RGB LEDs.
Signed-off-by: Jean-Jacques Hiblot <jjhiblot@traphandler.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20230728153731.3742339-4-jjhiblot@traphandler.com
Signed-off-by: Lee Jones <lee@kernel.org>
Store the color of the LED so that it is not lost after the LED's
name has been composed. This color information can then be exposed to
the user space or used by the LED consumer.
Signed-off-by: Jean-Jacques Hiblot <jjhiblot@traphandler.com>
Link: https://lore.kernel.org/r/20230728153731.3742339-3-jjhiblot@traphandler.com
Signed-off-by: Lee Jones <lee@kernel.org>
Add an optional variant of devm_of_led_get(). It behaves the same as
devm_of_led_get() except where the LED doesn't exist. In this case,
instead of returning -ENOENT, the function returns NULL.
Signed-off-by: Jean-Jacques Hiblot <jjhiblot@traphandler.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/20230728153731.3742339-2-jjhiblot@traphandler.com
Signed-off-by: Lee Jones <lee@kernel.org>
Fix copy-paste error in MODULE_DEVICE_TABLE() for the OF table,
use the 'of' first parameter instead of duplicate 'i2c'.
Fixes: ee4e80b296 ("leds: pca995x: Add support for PCA995X chips")
Signed-off-by: Marek Vasut <marex@denx.de>
Link: https://lore.kernel.org/r/20230809125314.531806-1-marex@denx.de
Signed-off-by: Lee Jones <lee@kernel.org>
Since commit f9a8ee8c8b ("pwm: Always allocate PWM chip base ID
dynamically") there is no effect any more for assigning this variable. See
pwmchip_add() which unconditionally overwrites this member.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20230728065739.580281-1-u.kleine-koenig@pengutronix.de
Signed-off-by: Lee Jones <lee@kernel.org>
Convert the Panasonic AN30259A 3-channel LED controller binding to DT
schema format.
Signed-off-by: Rob Herring <robh@kernel.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230724230258.1017258-1-robh@kernel.org
Signed-off-by: Lee Jones <lee@kernel.org>
The DT of_device.h and of_platform.h date back to the separate
of_platform_bus_type before it as merged into the regular platform bus.
As part of that merge prepping Arm DT support 13 years ago, they
"temporarily" include each other. They also include platform_device.h
and of.h. As a result, there's a pretty much random mix of those include
files used throughout the tree. In order to detangle these headers and
replace the implicit includes with struct declarations, users need to
explicitly include the correct includes.
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20230714174651.4058753-1-robh@kernel.org
Signed-off-by: Lee Jones <lee@kernel.org>
Symbol ARCH_BCM4908 has been merged/removed without updating leds
Kconfig.
Fixes: dd5c672d7c ("arm64: bcmbca: Merge ARCH_BCM4908 to ARCH_BCMBCA")
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Reviewed-by: William Zhang <william.zhang@broadcom.com>
Link: https://lore.kernel.org/r/20230714063214.3791-1-zajec5@gmail.com
Signed-off-by: Lee Jones <lee@kernel.org>
This is used for the Siemens Simatic IPC BX-21A, which has its LEDs
connected to GPIOs provided by the Intel Elkhart Lake pinctrl driver.
Signed-off-by: Henning Schild <henning.schild@siemens.com>
Link: https://lore.kernel.org/r/20230713115639.16419-3-henning.schild@siemens.com
Signed-off-by: Lee Jones <lee@kernel.org>
The PCA995x chips are I2C controlled LED drivers. Each chip has
up to 16 outputs, each one with an individual 8-bit resolution
PWM for brightness control.
Signed-off-by: Isai Gaspar <isaiezequiel.gaspar@nxp.com>
Signed-off-by: Marek Vasut <marex@denx.de> # Basically rewrite the driver
Link: https://lore.kernel.org/r/20230713163516.21644-2-marex@denx.de
Signed-off-by: Lee Jones <lee@kernel.org>
The PCA995x chips are I2C controlled LED drivers. Each chip has
up to 16 outputs, each one with an individual 8-bit resolution
PWM for brightness control. Add binding document.
Signed-off-by: Marek Vasut <marex@denx.de>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20230713163516.21644-1-marex@denx.de
Signed-off-by: Lee Jones <lee@kernel.org>
Negative -EINVAL was intended, not positive EINVAL. Fix it.
Fixes: 95138e0127 ("leds: pwm: Make error handling more robust")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/a33b981a-b2c4-4dc2-b00a-626a090d2f11@moroto.mountain
Signed-off-by: Lee Jones <lee@kernel.org>
Since the chip can drive up to 6 lines, the maximum
register number should be only 5, not 6.
Signed-off-by: Marek Vasut <marex@denx.de>
Acked-by: Rob Herring <robh@kernel.org>
Reviewed-by: Andreas Kemnade <andreas@kemnade.info>
Link: https://lore.kernel.org/r/20230704202929.91962-1-marex@denx.de
Signed-off-by: Lee Jones <lee@kernel.org>
Normally, the maximum brightness is determined by the hardware, and this
property is not required. This property is used to set a software limit.
It could happen that an LED is made so bright that it gets damaged or
causes damage due to restrictions in a specific system, such as mounting
conditions.
Note that this flag is mainly used for PWM-LEDs, where it is not possible
to map brightness to current. Drivers for other controllers should use
led-max-microamp.
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Astrid Rost <astrid.rost@axis.com>
Acked-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>
Link: https://lore.kernel.org/r/20230703130313.548519-3-astrid.rost@axis.com
Signed-off-by: Lee Jones <lee@kernel.org>
Normally, the maximum brightness is determined by the hardware, and this
property is not required. This property is used to set a software limit.
It could happen that an LED is made so bright that it gets damaged or
causes damage due to restrictions in a specific system, such as mounting
conditions.
Note that this flag is mainly used for PWM-LEDs, where it is not possible
to map brightness to current. Drivers for other controllers should use
led-max-microamp.
Signed-off-by: Astrid Rost <astrid.rost@axis.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Acked-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>
Link: https://lore.kernel.org/r/20230703130313.548519-2-astrid.rost@axis.com
Signed-off-by: Lee Jones <lee@kernel.org>
A recent rework accidentally lost the dependency on LEDS_CLASS, which
leads to a link error when LED support is disbled:
x86_64-linux-ld: drivers/leds/simple/simatic-ipc-leds.o: in function `simatic_ipc_leds_probe':
simatic-ipc-leds.c:(.text+0x10c): undefined reference to `devm_led_classdev_register_ext'
Add back the dependency that was there originally.
Fixes: a6c80bec3c ("leds: simatic-ipc-leds-gpio: Add GPIO version of Siemens driver")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20230623152233.2246285-1-arnd@kernel.org
Signed-off-by: Lee Jones <lee@kernel.org>
We recently introduced a way to name additional modules to load for each
device. Use that instead of wdtmode to load the watchdog module. This
patch does not change behaviour, it is just style.
Signed-off-by: Henning Schild <henning.schild@siemens.com>
Link: https://lore.kernel.org/r/20230713144832.26473-4-henning.schild@siemens.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
In order to know which hwmon modules to load one would have to usually
first probe from user-land i.e. with sensors-detect and create a config
for each machine. But here we know exactly what machines we are dealing
with, so we can request those howmon modules without user-mode detection
and config files.
Signed-off-by: Henning Schild <henning.schild@siemens.com>
Link: https://lore.kernel.org/r/20230713144832.26473-3-henning.schild@siemens.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
This is the panel variant of a device we already did have. All the same,
just no LEDs.
Signed-off-by: Henning Schild <henning.schild@siemens.com>
Link: https://lore.kernel.org/r/20230713144832.26473-2-henning.schild@siemens.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
We do not use PCI any longer since
commit 446f0cf9e0 ("platform/x86: simatic-ipc: drop custom P2SB bar code")'
Signed-off-by: Henning Schild <henning.schild@siemens.com>
Link: https://lore.kernel.org/r/20230706161040.21152-2-henning.schild@siemens.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Siemens Simatic Industrial PCs can monitor the voltage of the CMOS
battery with two bits that indicate low or empty state. This can be GPIO
or PortIO based.
Here we model that as a hwmon voltage. The core driver does the PortIO
and provides boilerplate for the GPIO versions. Which are split out to
model runtime dependencies while allowing fine-grained kernel
configuration.
Signed-off-by: Henning Schild <henning.schild@siemens.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20230706154831.19100-3-henning.schild@siemens.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
The IO region used for the watchdog also hold CMOS battery monitoring
information. Make the access muxed so that a hwmon driver can use the
region as well.
Signed-off-by: Henning Schild <henning.schild@siemens.com>
Acked-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20230706154831.19100-2-henning.schild@siemens.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
This adds support for the Siemens Simatic IPC model BX-21A. Actual
drivers for that model will be sent in separate patches.
Signed-off-by: Henning Schild <henning.schild@siemens.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20230713115639.16419-2-henning.schild@siemens.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
We just sorted the entries and fields last release, so just out of a
perverse sense of curiosity, I decided to see if we can keep things
ordered for even just one release.
The answer is "No. No we cannot".
I suggest that all kernel developers will need weekly training sessions,
involving a lot of Big Bird and Sesame Street. And at the yearly
maintainer summit, we will all sing the alphabet song together.
I doubt I will keep doing this. At some point "perverse sense of
curiosity" turns into just a cold dark place filled with sadness and
despair.
Repeats: 80e62bc848 ("MAINTAINERS: re-sort all entries and fields")
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
- swiotlb area sizing fixes (Petr Tesarik)
-----BEGIN PGP SIGNATURE-----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=4Lfc
-----END PGP SIGNATURE-----
Merge tag 'dma-mapping-6.5-2023-07-09' of git://git.infradead.org/users/hch/dma-mapping
Pull dma-mapping fixes from Christoph Hellwig:
- swiotlb area sizing fixes (Petr Tesarik)
* tag 'dma-mapping-6.5-2023-07-09' of git://git.infradead.org/users/hch/dma-mapping:
swiotlb: reduce the number of areas to match actual memory pool size
swiotlb: always set the number of areas before allocating the pool
boot reordering work
-----BEGIN PGP SIGNATURE-----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=RZFV
-----END PGP SIGNATURE-----
Merge tag 'x86_urgent_for_v6.5_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fpu fix from Borislav Petkov:
- Do FPU AP initialization on Xen PV too which got missed by the recent
boot reordering work
* tag 'x86_urgent_for_v6.5_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/xen: Fix secondary processors' FPU initialization
On shutdown or kexec, the kernel tries to park the non-boot CPUs with an
INIT IPI. But the same code path is also used by the crash utility. If the
CPU which panics is not the boot CPU then it sends an INIT IPI to the boot
CPU which resets the machine. Prevent this by validating that the CPU which
runs the stop mechanism is the boot CPU. If not, leave the other CPUs in
HLT.
-----BEGIN PGP SIGNATURE-----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=DOCF
-----END PGP SIGNATURE-----
Merge tag 'x86-core-2023-07-09' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fix from Thomas Gleixner:
"A single fix for the mechanism to park CPUs with an INIT IPI.
On shutdown or kexec, the kernel tries to park the non-boot CPUs with
an INIT IPI. But the same code path is also used by the crash utility.
If the CPU which panics is not the boot CPU then it sends an INIT IPI
to the boot CPU which resets the machine.
Prevent this by validating that the CPU which runs the stop mechanism
is the boot CPU. If not, leave the other CPUs in HLT"
* tag 'x86-core-2023-07-09' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/smp: Don't send INIT to boot CPU
