Inline the `rzg2l_cru_format_sizeimage()` function into its single
caller as the function is trivial and is not expected to be called
anywhere else.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Link: https://lore.kernel.org/r/20241018133446.223516-13-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Move the `rzg2l_cru_ip_format` struct to `rzg2l-cru.h` for better
accessibility and add a `datatype` member to it, allowing the
configuration of the ICnMC register based on the MIPI CSI2 data type.
Also, move the `rzg2l_cru_ip_code_to_fmt()` function to `rzg2l-cru.h`
to streamline format lookup and make it more accessible across the
driver.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Link: https://lore.kernel.org/r/20241018133446.223516-12-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
`WARN_ON(!fmt)` check in `rzg2l_cru_format_bytesperline()` is unnecessary
because the `rzg2l_cru_format_align()` function ensures that a valid
`pixelformat` is set before calling `rzg2l_cru_format_bytesperline()`. As
a result, `rzg2l_cru_format_from_pixel()` is guaranteed to return a
non-NULL value, making the check redundant.
Additionally, the return type of `rzg2l_cru_format_bytesperline()` is
`u32`, but the code returned `-EINVAL`, a negative value. This mismatch is
now resolved by removing the invalid error return path.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Link: https://lore.kernel.org/r/20241018133446.223516-11-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Simplified the `rzg2l_cru_ip_format` struct by removing the unused
`datatype` and `bpp` fields from the structure in `rzg2l-ip.c`.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Link: https://lore.kernel.org/r/20241018133446.223516-10-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
The INF field in the ICnMC register accepts data type codes as specified
in the MIPI CSI-2 v2.1 specification. This patch introduces the
`ICnMC_INF()` macro to use the MIPI CSI-2 data types, which are available
in the `media/mipi-csi2.h` header.
Suggested-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Link: https://lore.kernel.org/r/20241018133446.223516-9-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Remove the CSI virtual channel number from `struct rzg2l_cru_csi`.
Instead, pass the CSI virtual channel number as an argument to
`rzg2l_cru_csi2_setup()`.
Suggested-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Link: https://lore.kernel.org/r/20241018133446.223516-8-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
The RZ/G2L CRU needs to configure the ICnMC.VCSEL bits to specify which
virtual channel should be processed from the four available VCs. To
retrieve this information from the connected subdevice, the
.get_frame_desc() function is called.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://lore.kernel.org/r/20241018133446.223516-7-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
The RZ/G2L CRU requires information about which VCx to process data from,
among the four available VCs. To obtain this information, the
.get_frame_desc() routine is implemented. This routine, in turn, calls
.get_frame_desc() on the remote sensor connected to the CSI2 bridge.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://lore.kernel.org/r/20241018133446.223516-6-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
The media_entity_pads_init() function was previously hardcoded to use a
magic number for the number of pads. Replace the magic number with the
ARRAY_SIZE() macro to determine the number of pads dynamically.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Link: https://lore.kernel.org/r/20241018133446.223516-5-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Mark the sink and source pad with the MEDIA_PAD_FL_MUST_CONNECT flag to
ensure pipeline validation fails if it is not connected.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Link: https://lore.kernel.org/r/20241018133446.223516-4-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Mark the sink and source pad with the MEDIA_PAD_FL_MUST_CONNECT flag to
ensure pipeline validation fails if it is not connected.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Link: https://lore.kernel.org/r/20241018133446.223516-3-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
As per the hardware manual section 35.2.3.26 'AXI Master Transfer
Setting Register for CRU Image Data', it is mentioned that to improve
the transfer performance of CRU, it is recommended to use AXILEN value
'0xf' for AXI burst max length setting for image data.
Signed-off-by: Hien Huynh <hien.huynh.px@renesas.com>
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://lore.kernel.org/r/20240905111828.159670-1-biju.das.jz@bp.renesas.com
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Replace the ternary operator with an if. In this case the code is more
clear and also fixes the following cocci warnings:
drivers/staging/media/atomisp/pci/sh_css_frac.h:40:17-18: WARNING opportunity for max()
drivers/staging/media/atomisp/pci/sh_css_frac.h:50:17-18: WARNING opportunity for max()
Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Acked-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
The current order of locking between the driver mutex and the v4l2 subdev
state lock causes a circular locking dependency when trying to set up a
link. Fix this.
Signed-off-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
[Sakari Ailus: Fix spelling in commit message.]
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
IPU6 driver simply depends on X86, X86 and 64BIT cover the
X86_64, redundant X86_64 dependency in Kconfig could be removed.
Fixes: c70281cc83 ("media: intel/ipu6: add Kconfig and Makefile")
Suggested-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Bingbu Cao <bingbu.cao@intel.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
This patch fixes the build errors with `i386-allmodconfig`, the
errors are caused by wrong type casting and 64-bit division.
Signed-off-by: Bingbu Cao <bingbu.cao@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
The `get_frame_desc()` operation should always be called on a source pad,
which is indicated by the `MEDIA_PAD_FL_SOURCE` flag. This patch adds a
check in `call_get_frame_desc()` to ensure that the `MEDIA_PAD_FL_SOURCE`
flag is set for the pad before invoking `get_frame_desc()`. If the pad is
not a source pad, the function will return an `-EOPNOTSUPP` error,
signaling that the operation is not supported on non-source pads.
Suggested-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
The function ub960_rxport_read is being called and afterwards ret is
being checked for any failures, however ret is not being assigned to
the return of the function call. Fix this by assigning ret to the
return of the call which appears to be missing.
Fixes: afe267f2d3 ("media: i2c: add DS90UB960 driver")
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Document that callers of v4l2_subdev_{en,dis}able_streams() need to set
the mask to BIT_ULL(0).
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Document the expected {enable,disable}_streams callback behaviour for
drivers that are stream-unaware i.e. don't specify the
V4L2_SUBDEV_CAP_STREAMS sub-device capability flag. In this specific case,
the mask argument can be ignored.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
The scope of the s_stream video operation is now fully supported by
{enable,disable}_streams. Explicitly document the s_stream() op as
deprecated and update the related documentation.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Move request_irq() to probe(), in order to avoid requesting IRQ during
device start which happens frequently. As this function is in probe(), it
is better to replace it with its devm variant for managing the resource
efficiently.
While at it, drop the IRQF_SHARED flag as currently there is a single user
for this IRQ.
Suggested-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
If cci_read() fails, 'st' is set to 0 in cci_read(), so we return success,
instead of the expected error code.
Fix it and return the expected error.
Fixes: 9a6d7f2ba2 ("media: i2c: st-vgxy61: Convert to CCI register access helpers")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Benjamin Mugnier <benjamin.mugnier@foss.st.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Add support for Raspberry Pi CFE. The CFE is a hardware block that
contains:
- MIPI D-PHY
- MIPI CSI-2 receiver
- Front End ISP (FE)
The driver has been upported from the Raspberry Pi kernel commit
88a681df9623 ("ARM: dts: bcm2712-rpi: Add i2c<n>_pins labels").
Co-developed-by: Naushir Patuck <naush@raspberrypi.com>
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Add two meta formats for PiSP FE: V4L2_META_FMT_RPI_FE_CFG and
V4L2_META_FMT_RPI_FE_STATS. The former is used to provide configuration
for the FE and the latter is used to read the statistics from the FE.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Some R-Car SoCs are capable of capturing RAW10. Extend the format
enumeration, validation and setup to expose and configure for this
format if the particular device supports it.
The VIN is usually capable of converting from most media bus formats to
a range of different pixel formats. However if the input media bus
format is a RAW10 format this is not possible so the corresponding pixel
output format is forced.
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Document support for the ISP module in the Renesas V4M (r8a779h0) SoC.
This device is compatible with the CSISP module on the other Gen4 SoCs.
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Add the Gen4 family compatible. This will be used instead of a SoC
specific compatible for the new Gen4 SoC V4M. Two Gen4 boards (V3U and
V4H) have already been added prior and their bindings need to be kept
for backward compatibility.
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
The ISP Channel Selector IP is the same for all current Gen4 devices.
This was not known when adding support for V3U and V4H and a single SoC
specific compatible was used.
Before adding more SoC specific bindings for V4M add a family compatible
fallback for Gen4. That way the driver only needs to be updated once for
Gen4, and we still have the option to fix any problems in the driver if
any testable differences between the SoCs are found.
There are already DTS files using the V3U and V4H compatibles which
needs to be updated to not produce a warning for DTS checks. The driver
also needs to kept the compatible values to be backward compatible , but
for new Gen4 SoCs such as V4M we can avoid this.
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
The MAX96724 is almost identical to the MAX96712 and can be supported by
the same driver, add support for it.
For the staging driver which only supports patter generation the big
difference is that the datasheet (rev 4) for MAX96724 do not describe
the DEBUG_EXTRA register, which is at offset 0x0009 on MAX96712. It's
not clear if this register is removed or moved to a different offset.
What is known is writing to register 0x0009 have no effect on MAX96724.
This makes it impossible to increase the test pattern clock frequency
from 25 MHz to 75Mhz on MAX96724. To be able to get a stable test
pattern the DPLL frequency have to be increase instead to compensate for
this. The frequency selected is found by experimentation as the MAX96724
datasheet is much sparser then what's available for MAX96712.
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
The DEBUG_EXTRA register is not part of soon to be added MAX96724
device. To make it easier to understand the differences when reading the
code prepare for the addition by creating named defines for the
register.
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Prepare for supporting MAX96724 by moving the soon device specific link
frequency setting into information structure. This struct will be
extended to carry more differences between the two devices supported.
While at it remove trailing comma in device table, no entries will be
appended after the sentinel.
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
This check is incorrect and checks the wrong register. Furthermore there
is no documented shared device id register for MAX96712. There might be
overlap with the soon to be added MAX96724 device which do document such
a register.
However as the check was merely a precaution and to check during
development that the driver could talk to the device there is no harm in
removing it all together. A correct and more sophisticated check can be
added later if there ever is a need to differentiate between different
versions of a device.
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
The MAX96712 and MAX96724 are both quad GMSL2 to CSI-2 deserializers and
are in parts similar, but not identical. The most obvious difference is
on the CSI-2 side where the MAX96712 have 4 PHYs and support D-PHY with
1x4, 2x2 and 4x2 lanes where the MAX96724 only have 2 PHYs and supports
D-PHY with 2x4 or 4x2 lanes.
The register layout overlap in part but there are differences and holes.
Most of the differences are related to the different number of CSI-2
PHYs, but there are other capability differences between the two.
Add a specific compatible for MAX96724 to the max96712 bindings. The
bindings do not yet support validating all DT properties to limit it the
each devices capabilities. However to allow for this in future a
specific compatible for the two different devices are needed.
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
The V4M is the second Gen4 device that is enabled in the rcar-csi2
driver. There is much overlap with the already supported V4H device. The
registers that where new on Gen4 and where added with the V4H prefix are
retained and only new registers unique to the V4M are added with the new
V4M prefix. This follows the style for when V4H was added which had an
overlap with Gen3 registers.
The V4M CSI-2 receiver supports D-PHY mode only, either in 1-, 2- or
4-lane configuration. The datasheets do not document lane swapping and
is left out for now.
While the V4M only supports D-PHY the configuration for it is added in
such a way that it can be reused for V4H which supports both C-PHY and
D-PHY. No known SoC exists to test the D-PHY configuration on V4H so
it's not wired-up.
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Later datasheets add documentation for two magic value used for V4H
support. The same registers will also be used for V4M support, document
them.
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Prepare for V4M support by moving the PHTW write helpers to the generic
write helpers. This is needed as adding V4M support will involve
interact with the PHTW register from code that are logically grouped
with similar code in such a way that forward declarations of these
helpers would otherwise be needed.
The functions are moved verbatim.
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
The structure mapping a configuration information to a particular mpbs
setting needs to be extended with more information to support future
SoCs. Before it is extended reduce code duplication by creating a helper
to lookup information from an array of mbps setting, the lookup code
has already been copied to two speared locations.
While at it rename the structure to make it clear it contains
information related to a mbps setting, not just a single register value.
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Most of the registers used on the R-Car V4M CSI-2 IP are shared with the
devices already supported by the rcar-csi2 driver. Two registers which
function and layout are the same are however found on different offsets.
Prepare for adding support for R-Car V4M by storing the offset to these
two registers offsets in the device information structured. This way the
code, which is shared between the devices, can be reused when V4M
support is added.
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
The helper to write an array of code and data values to the PHY Test
Interface Write Register (PHTW) register uses the case where both code
and data are zero as an exit condition. This prevents writing data = 0
and code = 0 to the register.
Up until now this has been OK as no such combination where needed, and
it was a convenient exit condition. In future writing data = 0 and code
= 0 to the PHTW register will be needed.
Avoid using an exit condition when writing an array of PHTW values and
instead pass the length of the array to the helper. This allows any
combination of code and data to be written.
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
The data and code written thru the Test Interface Write Register (PHTW)
register are 8-bit wide, change the datatype used to reflect this.
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
The return of function imgu_css_grid_end_calc is void.
To ensure code clarity and prevent potential errors, it's advisable
to employ the ';' as a statement separator, except when ',' are
intentionally used for specific purposes.
Signed-off-by: Shen Lichuan <shenlichuan@vivo.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Replace a comma between expression statements by a semicolon.
Signed-off-by: Chen Ni <nichen@iscas.ac.cn>
Fixes: b4a3d877dc ("media: ti: Add CSI2RX support for J721E")
Reviewed-by: Jai Luthra <j-luthra@ti.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Currently, the V4L2 subdevice is also created when the device is not
available/connected. From userspace perspective, there is no visible
difference between a working and not-working subdevice (except when
trying it out).
This commit adds a simple preparation step, which includes an
availability check, before the subdev is initialized.
Signed-off-by: Benjamin Bara <benjamin.bara@skidata.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
As we don't know the mode during probe(), it doesn't make sense to
update the sensors' registers with assumptions. As imx290_set_ctrl(),
which is responsible for the happening communication, already ensures that
there is no communication with a suspended sensor, put the sensor to
suspend before calling it.
To clarify the dependency of the PM runtime to the link of the subdev
and the imx290 instance, put the block together.
Suggested-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Benjamin Bara <benjamin.bara@skidata.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
