Commit Graph

801303 Commits

Author SHA1 Message Date
Martijn Coenen
a7bbde7dfb BACKPORT: loop: Clean up LOOP_SET_STATUS lo_flags handling
LOOP_SET_STATUS(64) will actually allow some lo_flags to be modified; in
particular, LO_FLAGS_AUTOCLEAR can be set and cleared, whereas
LO_FLAGS_PARTSCAN can be set to request a partition scan. Make this
explicit by updating the UAPI to include the flags that can be
set/cleared using this ioctl.

The implementation can then blindly take over the passed in flags,
and use the previous flags for those flags that can't be set / cleared
using LOOP_SET_STATUS.

Signed-off-by: Martijn Coenen <maco@android.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
(cherry picked from commit faf1d25440)
Bug: 148607611
Change-Id: If80c0cce4ef7b1af4753246021981795bbc54ca0
2020-08-10 19:48:02 +02:00
Martijn Coenen
3393e59963 BACKPORT: loop: Rework lo_ioctl() __user argument casting
In preparation for a new ioctl that needs to copy_from_user(); makes the
code easier to read as well.

Signed-off-by: Martijn Coenen <maco@android.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
(cherry picked from commit 571fae6e29)
Bug: 148607611
Change-Id: Ie37d0ed6bfc91d2a55c070446e5c54c8343a7170
2020-08-10 19:48:02 +02:00
Martijn Coenen
052e9ce4bb BACKPORT: loop: Move loop_set_status_from_info() and friends up
So we can use it without forward declaration. This is a separate commit
to make it easier to verify that this is just a move, without functional
modifications.

Signed-off-by: Martijn Coenen <maco@android.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
(cherry picked from commit 62ab466ca8)
Bug: 148607611
Change-Id: I8c68ebbe65cbec476f9f2d4c1d60eb343e88bb56
2020-08-10 19:48:02 +02:00
Martijn Coenen
5e69a89011 BACKPORT: loop: Factor out configuring loop from status
Factor out this code into a separate function, so it can be reused by
other code more easily.

Signed-off-by: Martijn Coenen <maco@android.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
(cherry picked from commit 0c3796c244)
Bug: 148607611
Change-Id: I6bb8054a3963ba67bb44b07010d00ee53dbfef81
2020-08-10 19:48:02 +02:00
Martijn Coenen
0651770ca2 BACKPORT: loop: Remove figure_loop_size()
This function was now only used by loop_set_capacity(). Just open code
the remaining code in the caller instead.

Signed-off-by: Martijn Coenen <maco@android.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
(cherry picked from commit 0a6ed1b5ff)
Bug: 148607611
Change-Id: Icc5ef56a5f0264b9bfa15fbbe8062a74a59d88cb
2020-08-10 19:48:02 +02:00
Martijn Coenen
556233f645 BACKPORT: loop: Refactor loop_set_status() size calculation
figure_loop_size() calculates the loop size based on the passed in
parameters, but at the same time it updates the offset and sizelimit
parameters in the loop device configuration. That is a somewhat
unexpected side effect of a function with this name, and it is only only
needed by one of the two callers of this function - loop_set_status().

Move the lo_offset and lo_sizelimit assignment back into loop_set_status(),
and use the newly factored out functions to validate and apply the newly
calculated size. This allows us to get rid of figure_loop_size() in a
follow-up commit.

Signed-off-by: Martijn Coenen <maco@android.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
(cherry picked from commit b0bd158dd6)
Bug: 148607611
Change-Id: Ib8e10eb734c3f95f3c433c13012b378373336d10
2020-08-10 19:48:01 +02:00
Martijn Coenen
2260595c54 BACKPORT: loop: Factor out setting loop device size
This code is used repeatedly.

Signed-off-by: Martijn Coenen <maco@android.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
(cherry picked from commit 5795b6f560)
Bug: 148607611
Change-Id: I332d05033e13b6c9f75f9d959a4682135bd6c53c
2020-08-10 19:48:01 +02:00
Martijn Coenen
4c23d31faf BACKPORT: loop: Remove sector_t truncation checks
sector_t is now always u64, so we don't need to check for truncation.

Signed-off-by: Martijn Coenen <maco@android.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
(cherry picked from commit 083a6a5078)
Bug: 148607611
Change-Id: I1db87e391aca6226d542c5b74e569184ec059073
2020-08-10 19:48:01 +02:00
Martijn Coenen
b2fac90b6b BACKPORT: loop: Call loop_config_discard() only after new config is applied
loop_set_status() calls loop_config_discard() to configure discard for
the loop device; however, the discard configuration depends on whether
the loop device uses encryption, and when we call it the encryption
configuration has not been updated yet. Move the call down so we apply
the correct discard configuration based on the new configuration.

Signed-off-by: Martijn Coenen <maco@android.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Bob Liu <bob.liu@oracle.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
(cherry picked from commit 7c5014b098)
Bug: 148607611
Change-Id: I77cb81b7c8038ebdb2d4cd6161c034a9e94cf516
2020-08-10 19:48:01 +02:00
Greg Kroah-Hartman
3b375fecae This is the 4.19.138 stable release
-----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCAAdFiEEZH8oZUiU471FcZm+ONu9yGCSaT4FAl8tBOAACgkQONu9yGCS
 aT55vg/8Cu+PUFKeRV/ZijAbyfKqHuQukKvGXv/c82bhZyuwPA8IghuGH6qJ2MOC
 8bORGmAQcPVnYE5GRREELi9neyeZeQnNwlwOv5ESYn1/D34yLNnjGQUTf2OOVTOB
 kr9bJfkNcIXQM2ktgLW/BboFUJ0e4OJffEKg8LhP+0V7NXkDC1MD/5rlT8Pq0mr5
 pX0okkjfGBntcuVVHEzwlly0IV5KCSGBvfxxRTREGSfIP+sEP0y7ni49riD98s6n
 /QrKxOGXdfbDmzhngHKhmC29x/lL/oeFCZIVhyc0sLDQhq8QwFNPn1S7unTDBTzU
 XtOLBOhjnsOh2JkosiCnGQ8YDc+zAYp0B/USky7aTZZqgfpPWwHZrN7s4mmTQUB7
 IPCYQdSr+RF0WNyKacn4i1/p+z9UIbV6w9vSwZAs1oWcIs3BmHfe9OfRJk/weYSI
 4PuU7l2PR0u699PW6ZxW+m9FFZsiPlAI112pVLQXRP9MsQ4Liav4zGvt+FI8LgAS
 dyLFnrjhH2GvPW4MmsoV0HRt0XXtk7bg79RqlXkx82uDUsWgvvoUp8t+o6Vx91fZ
 s24cHGOh8Ovs+gyAl+OUWwBAmwcgwT4V7t/gh48e28BVzuSfLstAoJu6uknhzHb8
 SXnYVeLnADi/ImaXZPqvNpaKuiPlS1DHZGrNAUZN3MkTGhPLD4k=
 =bc9C
 -----END PGP SIGNATURE-----

Merge 4.19.138 into android-4.19-stable

Changes in 4.19.138
	random32: update the net random state on interrupt and activity
	ARM: percpu.h: fix build error
	random: fix circular include dependency on arm64 after addition of percpu.h
	random32: remove net_rand_state from the latent entropy gcc plugin
	random32: move the pseudo-random 32-bit definitions to prandom.h
	ext4: fix direct I/O read error
	Linux 4.19.138

Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Change-Id: Icd6c8647a1a5c49b44b9280d9a947f2af6b450db
2020-08-07 10:09:24 +02:00
Greg Kroah-Hartman
961f830af0 Linux 4.19.138
Tested-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-08-07 09:36:21 +02:00
Jiang Ying
aa09623108 ext4: fix direct I/O read error
This patch is used to fix ext4 direct I/O read error when
the read size is not aligned with block size.

Then, I will use a test to explain the error.

(1) Make a file that is not aligned with block size:
	$dd if=/dev/zero of=./test.jar bs=1000 count=3

(2) I wrote a source file named "direct_io_read_file.c" as following:

	#include <stdio.h>
	#include <stdlib.h>
	#include <unistd.h>
	#include <sys/file.h>
	#include <sys/types.h>
	#include <sys/stat.h>
	#include <string.h>
	#define BUF_SIZE 1024

	int main()
	{
		int fd;
		int ret;

		unsigned char *buf;
		ret = posix_memalign((void **)&buf, 512, BUF_SIZE);
		if (ret) {
			perror("posix_memalign failed");
			exit(1);
		}
		fd = open("./test.jar", O_RDONLY | O_DIRECT, 0755);
		if (fd < 0){
			perror("open ./test.jar failed");
			exit(1);
		}

		do {
			ret = read(fd, buf, BUF_SIZE);
			printf("ret=%d\n",ret);
			if (ret < 0) {
				perror("write test.jar failed");
			}
		} while (ret > 0);

		free(buf);
		close(fd);
	}

(3) Compile the source file:
	$gcc direct_io_read_file.c -D_GNU_SOURCE

(4) Run the test program:
	$./a.out

	The result is as following:
	ret=1024
	ret=1024
	ret=952
	ret=-1
	write test.jar failed: Invalid argument.

I have tested this program on XFS filesystem, XFS does not have
this problem, because XFS use iomap_dio_rw() to do direct I/O
read. And the comparing between read offset and file size is done
in iomap_dio_rw(), the code is as following:

	if (pos < size) {
		retval = filemap_write_and_wait_range(mapping, pos,
				pos + iov_length(iov, nr_segs) - 1);

		if (!retval) {
			retval = mapping->a_ops->direct_IO(READ, iocb,
						iov, pos, nr_segs);
		}
		...
	}

...only when "pos < size", direct I/O can be done, or 0 will be return.

I have tested the fix patch on Ext4, it is up to the mustard of
EINVAL in man2(read) as following:
	#include <unistd.h>
	ssize_t read(int fd, void *buf, size_t count);

	EINVAL
		fd is attached to an object which is unsuitable for reading;
		or the file was opened with the O_DIRECT flag, and either the
		address specified in buf, the value specified in count, or the
		current file offset is not suitably aligned.

So I think this patch can be applied to fix ext4 direct I/O error.

However Ext4 introduces direct I/O read using iomap infrastructure
on kernel 5.5, the patch is commit <b1b4705d54ab>
("ext4: introduce direct I/O read using iomap infrastructure"),
then Ext4 will be the same as XFS, they all use iomap_dio_rw() to do direct
I/O read. So this problem does not exist on kernel 5.5 for Ext4.

>From above description, we can see this problem exists on all the kernel
versions between kernel 3.14 and kernel 5.4. It will cause the Applications
to fail to read. For example, when the search service downloads a new full
index file, the search engine is loading the previous index file and is
processing the search request, it can not use buffer io that may squeeze
the previous index file in use from pagecache, so the serch service must
use direct I/O read.

Please apply this patch on these kernel versions, or please use the method
on kernel 5.5 to fix this problem.

Fixes: 9fe55eea7e ("Fix race when checking i_size on direct i/o read")
Reviewed-by: Jan Kara <jack@suse.cz>
Co-developed-by: Wang Long <wanglong19@meituan.com>
Signed-off-by: Wang Long <wanglong19@meituan.com>
Signed-off-by: Jiang Ying <jiangying8582@126.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-08-07 09:36:21 +02:00
Linus Torvalds
df9a9ac7a4 random32: move the pseudo-random 32-bit definitions to prandom.h
commit c0842fbc1b upstream.

The addition of percpu.h to the list of includes in random.h revealed
some circular dependencies on arm64 and possibly other platforms.  This
include was added solely for the pseudo-random definitions, which have
nothing to do with the rest of the definitions in this file but are
still there for legacy reasons.

This patch moves the pseudo-random parts to linux/prandom.h and the
percpu.h include with it, which is now guarded by _LINUX_PRANDOM_H and
protected against recursive inclusion.

A further cleanup step would be to remove this from <linux/random.h>
entirely, and make people who use the prandom infrastructure include
just the new header file.  That's a bit of a churn patch, but grepping
for "prandom_" and "next_pseudo_random32" "struct rnd_state" should
catch most users.

But it turns out that that nice cleanup step is fairly painful, because
a _lot_ of code currently seems to depend on the implicit include of
<linux/random.h>, which can currently come in a lot of ways, including
such fairly core headfers as <linux/net.h>.

So the "nice cleanup" part may or may never happen.

Fixes: 1c9df907da ("random: fix circular include dependency on arm64 after addition of percpu.h")
Tested-by: Guenter Roeck <linux@roeck-us.net>
Acked-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-08-07 09:36:21 +02:00
Linus Torvalds
e6b7c5f7a4 random32: remove net_rand_state from the latent entropy gcc plugin
commit 83bdc7275e upstream.

It turns out that the plugin right now ends up being really unhappy
about the change from 'static' to 'extern' storage that happened in
commit f227e3ec3b ("random32: update the net random state on interrupt
and activity").

This is probably a trivial fix for the latent_entropy plugin, but for
now, just remove net_rand_state from the list of things the plugin
worries about.

Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Emese Revfy <re.emese@gmail.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Willy Tarreau <w@1wt.eu>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-08-07 09:36:20 +02:00
Willy Tarreau
6f697da3eb random: fix circular include dependency on arm64 after addition of percpu.h
commit 1c9df907da upstream.

Daniel Díaz and Kees Cook independently reported that commit
f227e3ec3b ("random32: update the net random state on interrupt and
activity") broke arm64 due to a circular dependency on include files
since the addition of percpu.h in random.h.

The correct fix would definitely be to move all the prandom32 stuff out
of random.h but for backporting, a smaller solution is preferred.

This one replaces linux/percpu.h with asm/percpu.h, and this fixes the
problem on x86_64, arm64, arm, and mips.  Note that moving percpu.h
around didn't change anything and that removing it entirely broke
differently.  When backporting, such options might still be considered
if this patch fails to help.

[ It turns out that an alternate fix seems to be to just remove the
  troublesome <asm/pointer_auth.h> remove from the arm64 <asm/smp.h>
  that causes the circular dependency.

  But we might as well do the whole belt-and-suspenders thing, and
  minimize inclusion in <linux/random.h> too. Either will fix the
  problem, and both are good changes.   - Linus ]

Reported-by: Daniel Díaz <daniel.diaz@linaro.org>
Reported-by: Kees Cook <keescook@chromium.org>
Tested-by: Marc Zyngier <maz@kernel.org>
Fixes: f227e3ec3b
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-08-07 09:36:20 +02:00
Grygorii Strashko
546271c2c8 ARM: percpu.h: fix build error
commit aa54ea903a upstream.

Fix build error for the case:
  defined(CONFIG_SMP) && !defined(CONFIG_CPU_V6)

config: keystone_defconfig

  CC      arch/arm/kernel/signal.o
  In file included from ../include/linux/random.h:14,
                    from ../arch/arm/kernel/signal.c:8:
  ../arch/arm/include/asm/percpu.h: In function ‘__my_cpu_offset’:
  ../arch/arm/include/asm/percpu.h:29:34: error: ‘current_stack_pointer’ undeclared (first use in this function); did you mean ‘user_stack_pointer’?
      : "Q" (*(const unsigned long *)current_stack_pointer));
                                     ^~~~~~~~~~~~~~~~~~~~~
                                     user_stack_pointer

Fixes: f227e3ec3b ("random32: update the net random state on interrupt and activity")
Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-08-07 09:36:20 +02:00
Willy Tarreau
29204c8468 random32: update the net random state on interrupt and activity
commit f227e3ec3b upstream.

This modifies the first 32 bits out of the 128 bits of a random CPU's
net_rand_state on interrupt or CPU activity to complicate remote
observations that could lead to guessing the network RNG's internal
state.

Note that depending on some network devices' interrupt rate moderation
or binding, this re-seeding might happen on every packet or even almost
never.

In addition, with NOHZ some CPUs might not even get timer interrupts,
leaving their local state rarely updated, while they are running
networked processes making use of the random state.  For this reason, we
also perform this update in update_process_times() in order to at least
update the state when there is user or system activity, since it's the
only case we care about.

Reported-by: Amit Klein <aksecurity@gmail.com>
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Eric Dumazet <edumazet@google.com>
Cc: "Jason A. Donenfeld" <Jason@zx2c4.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Kees Cook <keescook@chromium.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-08-07 09:36:20 +02:00
Will McVicker
59619eb9de ANDROID: GKI: update the ABI xml
Leaf changes summary: 8 artifacts changed
Changed leaf types summary: 1 leaf type changed
Removed/Changed/Added functions summary: 0 Removed, 7 Changed, 0 Added function
Removed/Changed/Added variables summary: 0 Removed, 0 Changed, 0 Added variable

7 functions with some sub-type change:
'enum power_supply_property at power_supply.h:171:1' changed:
  type size hasn't changed
  1 enumerator insertion:
    'power_supply_property::POWER_SUPPLY_PROP_CC_TOGGLE_ENABLE' value '216'
  10 enumerator changes:
    ...
  7 impacted interfaces:
    ...

Signed-off-by: Will McVicker <willmcvicker@google.com>
Bug: 163013210
Bug: 162697021
Change-Id: Ic06e2fbab95ac11a23089770ab69ed6bfd03ae6b
2020-08-06 12:16:29 -07:00
Puma Hsu
e8f603ac1a ANDROID: GKI: power: Add property to enable/disable cc toggle
Add POWER_SUPPLY_PROP_CC_TOGGLE_ENABLE to force control the
typec cc toggling.

Bug: 163013210
Bug: 162697021
Signed-off-by: Puma Hsu <pumahsu@google.com>
Change-Id: I188a8afceedada4fb84e349eb56263d7da726851
(cherry picked from commit 489cd26d041ca5e663783bfb62dff61b87ab00a3)
Signed-off-by: Will McVicker <willmcvicker@google.com>
2020-08-06 12:16:08 -07:00
Matthias Maennich
d96fd50776 ANDROID: Enforce KMI stability
This declares ABI/KMI stability for the gki aarch64 config.

Bug: 134674532
Signed-off-by: Matthias Maennich <maennich@google.com>
Change-Id: I2e35c1281ee66ef22d4fce0fcce1269e827f8594
Signed-off-by: Will McVicker <willmcvicker@google.com>
2020-08-06 17:11:23 +00:00
Greg Kroah-Hartman
a5218b3636 This is the 4.19.137 stable release
-----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCAAdFiEEZH8oZUiU471FcZm+ONu9yGCSaT4FAl8qaHIACgkQONu9yGCS
 aT62TxAAwZ04yMUrjhm9TpAYUGJXcZ77AL2fliW4Ep8VRE1umCoKhmp8kB6JV5TD
 U/hxqufydvFbuRJK0hmrPhRPCkQfsTD6xKITjq1JgvEz5abGbrPXi7VZtJPQaiUN
 LxcNLwYfe2j8cRMWOpPQ10V/HvFpvlyrGF5TYpCT/5h1Y48FdBFTywNzmbL/J55O
 v7LMDgg2KB5SMPVsVktThWR5nsATiWBmJWb+4d0+GNkRX0idhu+XIKkNVWW8GAQa
 zjaUP9E7ysNU+YBwgD6uaRu0sgIxxqi9eITqqk+46b4gy1S/n5iorIkddkMoaySN
 ttLOiZZal9TDs1CTXXCPrw/14b+go9irEpwtYXGMdkmtOV28022m6YF7IkYHpX4I
 IsEPfLRlulB0i8DddNguOhHKVkD6Kuf934+sYV447QyqlPSszaGGxh+EK+aOk4/4
 PdwvUJlS90ExND0ID4whMgl50MOf6YcQxZ2oykDyNeVqU8USwdo0c6tYatNvdiu9
 DRzV6AU9CwnA0rYpCSpXY89j1uWeJCgKvYH3rTBIqUPKWT3LMfshu8xJioxP+29R
 eooKvy3I5miPv47s9cQKw+5dae0kH/8boR2flLBkGV/VB5VvnBBswP6Z0CCwMcT0
 M5+z7oLnbJdPIJ58kAKDvg6Fu9S/8Y5KVwUiZp3KkNRl9L5lDQY=
 =bZTL
 -----END PGP SIGNATURE-----

Merge 4.19.137 into android-4.19-stable

Changes in 4.19.137
	crypto: ccp - Release all allocated memory if sha type is invalid
	media: rc: prevent memory leak in cx23888_ir_probe
	iio: imu: adis16400: fix memory leak
	drm/amdgpu: fix multiple memory leaks in acp_hw_init
	tracing: Have error path in predicate_parse() free its allocated memory
	ath9k_htc: release allocated buffer if timed out
	ath9k: release allocated buffer if timed out
	drm/amd/display: prevent memory leak
	btrfs: inode: Verify inode mode to avoid NULL pointer dereference
	sctp: implement memory accounting on tx path
	Btrfs: fix selftests failure due to uninitialized i_mode in test inodes
	PCI/ASPM: Disable ASPM on ASMedia ASM1083/1085 PCIe-to-PCI bridge
	9p/trans_fd: Fix concurrency del of req_list in p9_fd_cancelled/p9_read_work
	wireless: Use offsetof instead of custom macro.
	ARM: 8986/1: hw_breakpoint: Don't invoke overflow handler on uaccess watchpoints
	Revert "drm/amdgpu: Fix NULL dereference in dpm sysfs handlers"
	drm/amdgpu: Prevent kernel-infoleak in amdgpu_info_ioctl()
	drm: hold gem reference until object is no longer accessed
	rds: Prevent kernel-infoleak in rds_notify_queue_get()
	xfs: fix missed wakeup on l_flush_wait
	net/x25: Fix x25_neigh refcnt leak when x25 disconnect
	net/x25: Fix null-ptr-deref in x25_disconnect
	xfrm: Fix crash when the hold queue is used.
	selftests/net: rxtimestamp: fix clang issues for target arch PowerPC
	selftests/net: psock_fanout: fix clang issues for target arch PowerPC
	sh: Fix validation of system call number
	net/mlx5: Verify Hardware supports requested ptp function on a given pin
	net: lan78xx: add missing endpoint sanity check
	net: lan78xx: fix transfer-buffer memory leak
	mlx4: disable device on shutdown
	mlxsw: core: Increase scope of RCU read-side critical section
	mlxsw: core: Free EMAD transactions using kfree_rcu()
	ibmvnic: Fix IRQ mapping disposal in error path
	bpf: Fix map leak in HASH_OF_MAPS map
	mac80211: mesh: Free ie data when leaving mesh
	mac80211: mesh: Free pending skb when destroying a mpath
	arm64/alternatives: move length validation inside the subsection
	arm64: csum: Fix handling of bad packets
	Bluetooth: fix kernel oops in store_pending_adv_report
	net: gemini: Fix missing clk_disable_unprepare() in error path of gemini_ethernet_port_probe()
	net/mlx5e: fix bpf_prog reference count leaks in mlx5e_alloc_rq
	usb: hso: Fix debug compile warning on sparc32
	qed: Disable "MFW indication via attention" SPAM every 5 minutes
	nfc: s3fwrn5: add missing release on skb in s3fwrn5_recv_frame
	parisc: add support for cmpxchg on u8 pointers
	net: ethernet: ravb: exit if re-initialization fails in tx timeout
	Revert "i2c: cadence: Fix the hold bit setting"
	x86/unwind/orc: Fix ORC for newly forked tasks
	cxgb4: add missing release on skb in uld_send()
	xen-netfront: fix potential deadlock in xennet_remove()
	KVM: LAPIC: Prevent setting the tscdeadline timer if the lapic is hw disabled
	x86/i8259: Use printk_deferred() to prevent deadlock
	Linux 4.19.137

Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Change-Id: Ic57c1620f2febb595f4f764757b1792ffc866643
2020-08-05 12:07:48 +02:00
Greg Kroah-Hartman
c076c79e03 Linux 4.19.137
Tested-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-08-05 10:06:06 +02:00
Thomas Gleixner
dc3d380f6e x86/i8259: Use printk_deferred() to prevent deadlock
commit bdd6558959 upstream.

0day reported a possible circular locking dependency:

Chain exists of:
  &irq_desc_lock_class --> console_owner --> &port_lock_key

 Possible unsafe locking scenario:

       CPU0                    CPU1
       ----                    ----
  lock(&port_lock_key);
                               lock(console_owner);
                               lock(&port_lock_key);
  lock(&irq_desc_lock_class);

The reason for this is a printk() in the i8259 interrupt chip driver
which is invoked with the irq descriptor lock held, which reverses the
lock operations vs. printk() from arbitrary contexts.

Switch the printk() to printk_deferred() to avoid that.

Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/87365abt2v.fsf@nanos.tec.linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-08-05 10:06:06 +02:00
Wanpeng Li
8c6c93ccb6 KVM: LAPIC: Prevent setting the tscdeadline timer if the lapic is hw disabled
commit d2286ba7d5 upstream.

Prevent setting the tscdeadline timer if the lapic is hw disabled.

Fixes: bce87cce88 (KVM: x86: consolidate different ways to test for in-kernel LAPIC)
Cc: <stable@vger.kernel.org>
Signed-off-by: Wanpeng Li <wanpengli@tencent.com>
Message-Id: <1596165141-28874-1-git-send-email-wanpengli@tencent.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-08-05 10:06:06 +02:00
Andrea Righi
4b635fc2b3 xen-netfront: fix potential deadlock in xennet_remove()
[ Upstream commit c2c6331064 ]

There's a potential race in xennet_remove(); this is what the driver is
doing upon unregistering a network device:

  1. state = read bus state
  2. if state is not "Closed":
  3.    request to set state to "Closing"
  4.    wait for state to be set to "Closing"
  5.    request to set state to "Closed"
  6.    wait for state to be set to "Closed"

If the state changes to "Closed" immediately after step 1 we are stuck
forever in step 4, because the state will never go back from "Closed" to
"Closing".

Make sure to check also for state == "Closed" in step 4 to prevent the
deadlock.

Also add a 5 sec timeout any time we wait for the bus state to change,
to avoid getting stuck forever in wait_event().

Signed-off-by: Andrea Righi <andrea.righi@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-08-05 10:06:05 +02:00
Navid Emamdoost
214ac24e07 cxgb4: add missing release on skb in uld_send()
[ Upstream commit e6827d1abd ]

In the implementation of uld_send(), the skb is consumed on all
execution paths except one. Release skb when returning NET_XMIT_DROP.

Signed-off-by: Navid Emamdoost <navid.emamdoost@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-08-05 10:06:05 +02:00
Josh Poimboeuf
a9e49596a6 x86/unwind/orc: Fix ORC for newly forked tasks
[ Upstream commit 372a8eaa05 ]

The ORC unwinder fails to unwind newly forked tasks which haven't yet
run on the CPU.  It correctly reads the 'ret_from_fork' instruction
pointer from the stack, but it incorrectly interprets that value as a
call stack address rather than a "signal" one, so the address gets
incorrectly decremented in the call to orc_find(), resulting in bad ORC
data.

Fix it by forcing 'ret_from_fork' frames to be signal frames.

Reported-by: Wang ShaoBo <bobo.shaobowang@huawei.com>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Wang ShaoBo <bobo.shaobowang@huawei.com>
Link: https://lkml.kernel.org/r/f91a8778dde8aae7f71884b5df2b16d552040441.1594994374.git.jpoimboe@redhat.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-08-05 10:06:05 +02:00
Raviteja Narayanam
2bf308bb77 Revert "i2c: cadence: Fix the hold bit setting"
[ Upstream commit 0db9254d6b ]

This reverts commit d358def706.

There are two issues with "i2c: cadence: Fix the hold bit setting" commit.

1. In case of combined message request from user space, when the HOLD
bit is cleared in cdns_i2c_mrecv function, a STOP condition is sent
on the bus even before the last message is started. This is because when
the HOLD bit is cleared, the FIFOS are empty and there is no pending
transfer. The STOP condition should occur only after the last message
is completed.

2. The code added by the commit is redundant. Driver is handling the
setting/clearing of HOLD bit in right way before the commit.

The setting of HOLD bit based on 'bus_hold_flag' is taken care in
cdns_i2c_master_xfer function even before cdns_i2c_msend/cdns_i2c_recv
functions.

The clearing of HOLD bit is taken care at the end of cdns_i2c_msend and
cdns_i2c_recv functions based on bus_hold_flag and byte count.
Since clearing of HOLD bit is done after the slave address is written to
the register (writing to address register triggers the message transfer),
it is ensured that STOP condition occurs at the right time after
completion of the pending transfer (last message).

Signed-off-by: Raviteja Narayanam <raviteja.narayanam@xilinx.com>
Acked-by: Michal Simek <michal.simek@xilinx.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-08-05 10:06:05 +02:00
Yoshihiro Shimoda
4418d72258 net: ethernet: ravb: exit if re-initialization fails in tx timeout
[ Upstream commit 015c5d5e6a ]

According to the report of [1], this driver is possible to cause
the following error in ravb_tx_timeout_work().

ravb e6800000.ethernet ethernet: failed to switch device to config mode

This error means that the hardware could not change the state
from "Operation" to "Configuration" while some tx and/or rx queue
are operating. After that, ravb_config() in ravb_dmac_init() will fail,
and then any descriptors will be not allocaled anymore so that NULL
pointer dereference happens after that on ravb_start_xmit().

To fix the issue, the ravb_tx_timeout_work() should check
the return values of ravb_stop_dma() and ravb_dmac_init().
If ravb_stop_dma() fails, ravb_tx_timeout_work() re-enables TX and RX
and just exits. If ravb_dmac_init() fails, just exits.

[1]
https://lore.kernel.org/linux-renesas-soc/20200518045452.2390-1-dirk.behme@de.bosch.com/

Reported-by: Dirk Behme <dirk.behme@de.bosch.com>
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Reviewed-by: Sergei Shtylyov <sergei.shtylyov@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-08-05 10:06:05 +02:00
Liam Beguin
ddce1f2d9d parisc: add support for cmpxchg on u8 pointers
[ Upstream commit b344d6a83d ]

The kernel test bot reported[1] that using set_mask_bits on a u8 causes
the following issue on parisc:

	hppa-linux-ld: drivers/phy/ti/phy-tusb1210.o: in function `tusb1210_probe':
	>> (.text+0x2f4): undefined reference to `__cmpxchg_called_with_bad_pointer'
	>> hppa-linux-ld: (.text+0x324): undefined reference to `__cmpxchg_called_with_bad_pointer'
	hppa-linux-ld: (.text+0x354): undefined reference to `__cmpxchg_called_with_bad_pointer'

Add support for cmpxchg on u8 pointers.

[1] https://lore.kernel.org/patchwork/patch/1272617/#1468946

Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Liam Beguin <liambeguin@gmail.com>
Tested-by: Dave Anglin <dave.anglin@bell.net>
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-08-05 10:06:05 +02:00
Navid Emamdoost
5fa5e4def8 nfc: s3fwrn5: add missing release on skb in s3fwrn5_recv_frame
[ Upstream commit 1e8fd3a97f ]

The implementation of s3fwrn5_recv_frame() is supposed to consume skb on
all execution paths. Release skb before returning -ENODEV.

Signed-off-by: Navid Emamdoost <navid.emamdoost@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-08-05 10:06:05 +02:00
Laurence Oberman
d042d9abc1 qed: Disable "MFW indication via attention" SPAM every 5 minutes
[ Upstream commit 1d61e21852 ]

This is likely firmware causing this but its starting to annoy customers.
Change the message level to verbose to prevent the spam.
Note that this seems to only show up with ISCSI enabled on the HBA via the
qedi driver.

Signed-off-by: Laurence Oberman <loberman@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-08-05 10:06:04 +02:00
Geert Uytterhoeven
e2ccd43b7a usb: hso: Fix debug compile warning on sparc32
[ Upstream commit e0484010ec ]

On sparc32, tcflag_t is "unsigned long", unlike on all other
architectures, where it is "unsigned int":

    drivers/net/usb/hso.c: In function ‘hso_serial_set_termios’:
    include/linux/kern_levels.h:5:18: warning: format ‘%d’ expects argument of type ‘unsigned int’, but argument 4 has type ‘tcflag_t {aka long unsigned int}’ [-Wformat=]
    drivers/net/usb/hso.c:1393:3: note: in expansion of macro ‘hso_dbg’
       hso_dbg(0x16, "Termios called with: cflags new[%d] - old[%d]\n",
       ^~~~~~~
    include/linux/kern_levels.h:5:18: warning: format ‘%d’ expects argument of type ‘unsigned int’, but argument 5 has type ‘tcflag_t {aka long unsigned int}’ [-Wformat=]
    drivers/net/usb/hso.c:1393:3: note: in expansion of macro ‘hso_dbg’
       hso_dbg(0x16, "Termios called with: cflags new[%d] - old[%d]\n",
       ^~~~~~~

As "unsigned long" is 32-bit on sparc32, fix this by casting all tcflag_t
parameters to "unsigned int".
While at it, use "%u" to format unsigned numbers.

Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-08-05 10:06:04 +02:00
Xin Xiong
eb3a903d10 net/mlx5e: fix bpf_prog reference count leaks in mlx5e_alloc_rq
[ Upstream commit e692139e6a ]

The function invokes bpf_prog_inc(), which increases the reference
count of a bpf_prog object "rq->xdp_prog" if the object isn't NULL.

The refcount leak issues take place in two error handling paths. When
either mlx5_wq_ll_create() or mlx5_wq_cyc_create() fails, the function
simply returns the error code and forgets to drop the reference count
increased earlier, causing a reference count leak of "rq->xdp_prog".

Fix this issue by jumping to the error handling path err_rq_wq_destroy
while either function fails.

Fixes: 422d4c401e ("net/mlx5e: RX, Split WQ objects for different RQ types")
Signed-off-by: Xin Xiong <xiongx18@fudan.edu.cn>
Signed-off-by: Xiyu Yang <xiyuyang19@fudan.edu.cn>
Signed-off-by: Xin Tan <tanxin.ctf@gmail.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-08-05 10:06:04 +02:00
Wang Hai
0a48de9522 net: gemini: Fix missing clk_disable_unprepare() in error path of gemini_ethernet_port_probe()
[ Upstream commit 85496a2922 ]

Fix the missing clk_disable_unprepare() before return
from gemini_ethernet_port_probe() in the error handling case.

Fixes: 4d5ae32f5e ("net: ethernet: Add a driver for Gemini gigabit ethernet")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Wang Hai <wanghai38@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-08-05 10:06:04 +02:00
Alain Michaud
5df9e5613d Bluetooth: fix kernel oops in store_pending_adv_report
[ Upstream commit a2ec905d1e ]

Fix kernel oops observed when an ext adv data is larger than 31 bytes.

This can be reproduced by setting up an advertiser with advertisement
larger than 31 bytes.  The issue is not sensitive to the advertisement
content.  In particular, this was reproduced with an advertisement of
229 bytes filled with 'A'.  See stack trace below.

This is fixed by not catching ext_adv as legacy adv are only cached to
be able to concatenate a scanable adv with its scan response before
sending it up through mgmt.

With ext_adv, this is no longer necessary.

  general protection fault: 0000 [#1] SMP PTI
  CPU: 6 PID: 205 Comm: kworker/u17:0 Not tainted 5.4.0-37-generic #41-Ubuntu
  Hardware name: Dell Inc. XPS 15 7590/0CF6RR, BIOS 1.7.0 05/11/2020
  Workqueue: hci0 hci_rx_work [bluetooth]
  RIP: 0010:hci_bdaddr_list_lookup+0x1e/0x40 [bluetooth]
  Code: ff ff e9 26 ff ff ff 0f 1f 44 00 00 0f 1f 44 00 00 55 48 8b 07 48 89 e5 48 39 c7 75 0a eb 24 48 8b 00 48 39 f8 74 1c 44 8b 06 <44> 39 40 10 75 ef 44 0f b7 4e 04 66 44 39 48 14 75 e3 38 50 16 75
  RSP: 0018:ffffbc6a40493c70 EFLAGS: 00010286
  RAX: 4141414141414141 RBX: 000000000000001b RCX: 0000000000000000
  RDX: 0000000000000000 RSI: ffff9903e76c100f RDI: ffff9904289d4b28
  RBP: ffffbc6a40493c70 R08: 0000000093570362 R09: 0000000000000000
  R10: 0000000000000000 R11: ffff9904344eae38 R12: ffff9904289d4000
  R13: 0000000000000000 R14: 00000000ffffffa3 R15: ffff9903e76c100f
  FS: 0000000000000000(0000) GS:ffff990434580000(0000) knlGS:0000000000000000
  CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
  CR2: 00007feed125a000 CR3: 00000001b860a003 CR4: 00000000003606e0
  Call Trace:
    process_adv_report+0x12e/0x560 [bluetooth]
    hci_le_meta_evt+0x7b2/0xba0 [bluetooth]
    hci_event_packet+0x1c29/0x2a90 [bluetooth]
    hci_rx_work+0x19b/0x360 [bluetooth]
    process_one_work+0x1eb/0x3b0
    worker_thread+0x4d/0x400
    kthread+0x104/0x140

Fixes: c215e9397b ("Bluetooth: Process extended ADV report event")
Reported-by: Andy Nguyen <theflow@google.com>
Reported-by: Linus Torvalds <torvalds@linux-foundation.org>
Reported-by: Balakrishna Godavarthi <bgodavar@codeaurora.org>
Signed-off-by: Alain Michaud <alainm@chromium.org>
Tested-by: Sonny Sasaka <sonnysasaka@chromium.org>
Acked-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-08-05 10:06:04 +02:00
Robin Murphy
0be9b57b5b arm64: csum: Fix handling of bad packets
[ Upstream commit 05fb3dbda1 ]

Although iph is expected to point to at least 20 bytes of valid memory,
ihl may be bogus, for example on reception of a corrupt packet. If it
happens to be less than 5, we really don't want to run away and
dereference 16GB worth of memory until it wraps back to exactly zero...

Fixes: 0e455d8e80 ("arm64: Implement optimised IP checksum helpers")
Reported-by: guodeqing <geffrey.guo@huawei.com>
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-08-05 10:06:04 +02:00
Sami Tolvanen
53f941777b arm64/alternatives: move length validation inside the subsection
[ Upstream commit 966a0acce2 ]

Commit f7b93d4294 ("arm64/alternatives: use subsections for replacement
sequences") breaks LLVM's integrated assembler, because due to its
one-pass design, it cannot compute instruction sequence lengths before the
layout for the subsection has been finalized. This change fixes the build
by moving the .org directives inside the subsection, so they are processed
after the subsection layout is known.

Fixes: f7b93d4294 ("arm64/alternatives: use subsections for replacement sequences")
Signed-off-by: Sami Tolvanen <samitolvanen@google.com>
Link: https://github.com/ClangBuiltLinux/linux/issues/1078
Link: https://lore.kernel.org/r/20200730153701.3892953-1-samitolvanen@google.com
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-08-05 10:06:04 +02:00
Remi Pommarel
0535c43d36 mac80211: mesh: Free pending skb when destroying a mpath
[ Upstream commit 5e43540c2a ]

A mpath object can hold reference on a list of skb that are waiting for
mpath resolution to be sent. When destroying a mpath this skb list
should be cleaned up in order to not leak memory.

Fixing that kind of leak:

unreferenced object 0xffff0000181c9300 (size 1088):
  comm "openvpn", pid 1782, jiffies 4295071698 (age 80.416s)
  hex dump (first 32 bytes):
    00 00 00 00 00 00 00 00 f9 80 36 00 00 00 00 00  ..........6.....
    02 00 07 40 00 00 00 00 00 00 00 00 00 00 00 00  ...@............
  backtrace:
    [<000000004bc6a443>] kmem_cache_alloc+0x1a4/0x2f0
    [<000000002caaef13>] sk_prot_alloc.isra.39+0x34/0x178
    [<00000000ceeaa916>] sk_alloc+0x34/0x228
    [<00000000ca1f1d04>] inet_create+0x198/0x518
    [<0000000035626b1c>] __sock_create+0x134/0x328
    [<00000000a12b3a87>] __sys_socket+0xb0/0x158
    [<00000000ff859f23>] __arm64_sys_socket+0x40/0x58
    [<00000000263486ec>] el0_svc_handler+0xd0/0x1a0
    [<0000000005b5157d>] el0_svc+0x8/0xc
unreferenced object 0xffff000012973a40 (size 216):
  comm "openvpn", pid 1782, jiffies 4295082137 (age 38.660s)
  hex dump (first 32 bytes):
    00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
    00 c0 06 16 00 00 ff ff 00 93 1c 18 00 00 ff ff  ................
  backtrace:
    [<000000004bc6a443>] kmem_cache_alloc+0x1a4/0x2f0
    [<0000000023c8c8f9>] __alloc_skb+0xc0/0x2b8
    [<000000007ad950bb>] alloc_skb_with_frags+0x60/0x320
    [<00000000ef90023a>] sock_alloc_send_pskb+0x388/0x3c0
    [<00000000104fb1a3>] sock_alloc_send_skb+0x1c/0x28
    [<000000006919d2dd>] __ip_append_data+0xba4/0x11f0
    [<0000000083477587>] ip_make_skb+0x14c/0x1a8
    [<0000000024f3d592>] udp_sendmsg+0xaf0/0xcf0
    [<000000005aabe255>] inet_sendmsg+0x5c/0x80
    [<000000008651ea08>] __sys_sendto+0x15c/0x218
    [<000000003505c99b>] __arm64_sys_sendto+0x74/0x90
    [<00000000263486ec>] el0_svc_handler+0xd0/0x1a0
    [<0000000005b5157d>] el0_svc+0x8/0xc

Fixes: 2bdaf386f9 (mac80211: mesh: move path tables into if_mesh)
Signed-off-by: Remi Pommarel <repk@triplefau.lt>
Link: https://lore.kernel.org/r/20200704135419.27703-1-repk@triplefau.lt
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-08-05 10:06:04 +02:00
Remi Pommarel
37bccfa895 mac80211: mesh: Free ie data when leaving mesh
[ Upstream commit 6a01afcf84 ]

At ieee80211_join_mesh() some ie data could have been allocated (see
copy_mesh_setup()) and need to be cleaned up when leaving the mesh.

This fixes the following kmemleak report:

unreferenced object 0xffff0000116bc600 (size 128):
  comm "wpa_supplicant", pid 608, jiffies 4294898983 (age 293.484s)
  hex dump (first 32 bytes):
    30 14 01 00 00 0f ac 04 01 00 00 0f ac 04 01 00  0...............
    00 0f ac 08 00 00 00 00 c4 65 40 00 00 00 00 00  .........e@.....
  backtrace:
    [<00000000bebe439d>] __kmalloc_track_caller+0x1c0/0x330
    [<00000000a349dbe1>] kmemdup+0x28/0x50
    [<0000000075d69baa>] ieee80211_join_mesh+0x6c/0x3b8 [mac80211]
    [<00000000683bb98b>] __cfg80211_join_mesh+0x1e8/0x4f0 [cfg80211]
    [<0000000072cb507f>] nl80211_join_mesh+0x520/0x6b8 [cfg80211]
    [<0000000077e9bcf9>] genl_family_rcv_msg+0x374/0x680
    [<00000000b1bd936d>] genl_rcv_msg+0x78/0x108
    [<0000000022c53788>] netlink_rcv_skb+0xb0/0x1c0
    [<0000000011af8ec9>] genl_rcv+0x34/0x48
    [<0000000069e41f53>] netlink_unicast+0x268/0x2e8
    [<00000000a7517316>] netlink_sendmsg+0x320/0x4c0
    [<0000000069cba205>] ____sys_sendmsg+0x354/0x3a0
    [<00000000e06bab0f>] ___sys_sendmsg+0xd8/0x120
    [<0000000037340728>] __sys_sendmsg+0xa4/0xf8
    [<000000004fed9776>] __arm64_sys_sendmsg+0x44/0x58
    [<000000001c1e5647>] el0_svc_handler+0xd0/0x1a0

Fixes: c80d545da3 (mac80211: Let userspace enable and configure vendor specific path selection.)
Signed-off-by: Remi Pommarel <repk@triplefau.lt>
Link: https://lore.kernel.org/r/20200704135007.27292-1-repk@triplefau.lt
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-08-05 10:06:03 +02:00
Andrii Nakryiko
634d42cadc bpf: Fix map leak in HASH_OF_MAPS map
[ Upstream commit 1d4e1eab45 ]

Fix HASH_OF_MAPS bug of not putting inner map pointer on bpf_map_elem_update()
operation. This is due to per-cpu extra_elems optimization, which bypassed
free_htab_elem() logic doing proper clean ups. Make sure that inner map is put
properly in optimized case as well.

Fixes: 8c290e60fa ("bpf: fix hashmap extra_elems logic")
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Song Liu <songliubraving@fb.com>
Link: https://lore.kernel.org/bpf/20200729040913.2815687-1-andriin@fb.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-08-05 10:06:03 +02:00
Thomas Falcon
5858ad8d6a ibmvnic: Fix IRQ mapping disposal in error path
[ Upstream commit 27a2145d6f ]

RX queue IRQ mappings are disposed in both the TX IRQ and RX IRQ
error paths. Fix this and dispose of TX IRQ mappings correctly in
case of an error.

Fixes: ea22d51a78 ("ibmvnic: simplify and improve driver probe function")
Signed-off-by: Thomas Falcon <tlfalcon@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-08-05 10:06:03 +02:00
Ido Schimmel
685d55c516 mlxsw: core: Free EMAD transactions using kfree_rcu()
[ Upstream commit 3c8ce24b03 ]

The lifetime of EMAD transactions (i.e., 'struct mlxsw_reg_trans') is
managed using RCU. They are freed using kfree_rcu() once the transaction
ends.

However, in case the transaction failed it is freed immediately after being
removed from the active transactions list. This is problematic because it is
still possible for a different CPU to dereference the transaction from an RCU
read-side critical section while traversing the active transaction list in
mlxsw_emad_rx_listener_func(). In which case, a use-after-free is triggered
[1].

Fix this by freeing the transaction after a grace period by calling
kfree_rcu().

[1]
BUG: KASAN: use-after-free in mlxsw_emad_rx_listener_func+0x969/0xac0 drivers/net/ethernet/mellanox/mlxsw/core.c:671
Read of size 8 at addr ffff88800b7964e8 by task syz-executor.2/2881

CPU: 0 PID: 2881 Comm: syz-executor.2 Not tainted 5.8.0-rc4+ #44
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.12.1-0-ga5cab58e9a3f-prebuilt.qemu.org 04/01/2014
Call Trace:
 <IRQ>
 __dump_stack lib/dump_stack.c:77 [inline]
 dump_stack+0xf6/0x16e lib/dump_stack.c:118
 print_address_description.constprop.0+0x1c/0x250 mm/kasan/report.c:383
 __kasan_report mm/kasan/report.c:513 [inline]
 kasan_report.cold+0x1f/0x37 mm/kasan/report.c:530
 mlxsw_emad_rx_listener_func+0x969/0xac0 drivers/net/ethernet/mellanox/mlxsw/core.c:671
 mlxsw_core_skb_receive+0x571/0x700 drivers/net/ethernet/mellanox/mlxsw/core.c:2061
 mlxsw_pci_cqe_rdq_handle drivers/net/ethernet/mellanox/mlxsw/pci.c:595 [inline]
 mlxsw_pci_cq_tasklet+0x12a6/0x2520 drivers/net/ethernet/mellanox/mlxsw/pci.c:651
 tasklet_action_common.isra.0+0x13f/0x3e0 kernel/softirq.c:550
 __do_softirq+0x223/0x964 kernel/softirq.c:292
 asm_call_on_stack+0x12/0x20 arch/x86/entry/entry_64.S:711
 </IRQ>
 __run_on_irqstack arch/x86/include/asm/irq_stack.h:22 [inline]
 run_on_irqstack_cond arch/x86/include/asm/irq_stack.h:48 [inline]
 do_softirq_own_stack+0x109/0x140 arch/x86/kernel/irq_64.c:77
 invoke_softirq kernel/softirq.c:387 [inline]
 __irq_exit_rcu kernel/softirq.c:417 [inline]
 irq_exit_rcu+0x16f/0x1a0 kernel/softirq.c:429
 sysvec_apic_timer_interrupt+0x4e/0xd0 arch/x86/kernel/apic/apic.c:1091
 asm_sysvec_apic_timer_interrupt+0x12/0x20 arch/x86/include/asm/idtentry.h:587
RIP: 0010:arch_local_irq_restore arch/x86/include/asm/irqflags.h:85 [inline]
RIP: 0010:__raw_spin_unlock_irqrestore include/linux/spinlock_api_smp.h:160 [inline]
RIP: 0010:_raw_spin_unlock_irqrestore+0x3b/0x40 kernel/locking/spinlock.c:191
Code: e8 2a c3 f4 fc 48 89 ef e8 12 96 f5 fc f6 c7 02 75 11 53 9d e8 d6 db 11 fd 65 ff 0d 1f 21 b3 56 5b 5d c3 e8 a7 d7 11 fd 53 9d <eb> ed 0f 1f 00 55 48 89 fd 65 ff 05 05 21 b3 56 ff 74 24 08 48 8d
RSP: 0018:ffff8880446ffd80 EFLAGS: 00000286
RAX: 0000000000000006 RBX: 0000000000000286 RCX: 0000000000000006
RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffffffffa94ecea9
RBP: ffff888012934408 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000001 R11: fffffbfff57be301 R12: 1ffff110088dffc1
R13: ffff888037b817c0 R14: ffff88802442415a R15: ffff888024424000
 __do_sys_perf_event_open+0x1b5d/0x2bd0 kernel/events/core.c:11874
 do_syscall_64+0x56/0xa0 arch/x86/entry/common.c:384
 entry_SYSCALL_64_after_hwframe+0x44/0xa9
RIP: 0033:0x473dbd
Code: Bad RIP value.
RSP: 002b:00007f21e5e9cc28 EFLAGS: 00000246 ORIG_RAX: 000000000000012a
RAX: ffffffffffffffda RBX: 000000000057bf00 RCX: 0000000000473dbd
RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000020000040
RBP: 000000000057bf00 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000003 R11: 0000000000000246 R12: 000000000057bf0c
R13: 00007ffd0493503f R14: 00000000004d0f46 R15: 00007f21e5e9cd80

Allocated by task 871:
 save_stack+0x1b/0x40 mm/kasan/common.c:48
 set_track mm/kasan/common.c:56 [inline]
 __kasan_kmalloc mm/kasan/common.c:494 [inline]
 __kasan_kmalloc.constprop.0+0xc2/0xd0 mm/kasan/common.c:467
 kmalloc include/linux/slab.h:555 [inline]
 kzalloc include/linux/slab.h:669 [inline]
 mlxsw_core_reg_access_emad+0x70/0x1410 drivers/net/ethernet/mellanox/mlxsw/core.c:1812
 mlxsw_core_reg_access+0xeb/0x540 drivers/net/ethernet/mellanox/mlxsw/core.c:1991
 mlxsw_sp_port_get_hw_xstats+0x335/0x7e0 drivers/net/ethernet/mellanox/mlxsw/spectrum.c:1130
 update_stats_cache+0xf4/0x140 drivers/net/ethernet/mellanox/mlxsw/spectrum.c:1173
 process_one_work+0xa3e/0x17a0 kernel/workqueue.c:2269
 worker_thread+0x9e/0x1050 kernel/workqueue.c:2415
 kthread+0x355/0x470 kernel/kthread.c:291
 ret_from_fork+0x22/0x30 arch/x86/entry/entry_64.S:293

Freed by task 871:
 save_stack+0x1b/0x40 mm/kasan/common.c:48
 set_track mm/kasan/common.c:56 [inline]
 kasan_set_free_info mm/kasan/common.c:316 [inline]
 __kasan_slab_free+0x12c/0x170 mm/kasan/common.c:455
 slab_free_hook mm/slub.c:1474 [inline]
 slab_free_freelist_hook mm/slub.c:1507 [inline]
 slab_free mm/slub.c:3072 [inline]
 kfree+0xe6/0x320 mm/slub.c:4052
 mlxsw_core_reg_access_emad+0xd45/0x1410 drivers/net/ethernet/mellanox/mlxsw/core.c:1819
 mlxsw_core_reg_access+0xeb/0x540 drivers/net/ethernet/mellanox/mlxsw/core.c:1991
 mlxsw_sp_port_get_hw_xstats+0x335/0x7e0 drivers/net/ethernet/mellanox/mlxsw/spectrum.c:1130
 update_stats_cache+0xf4/0x140 drivers/net/ethernet/mellanox/mlxsw/spectrum.c:1173
 process_one_work+0xa3e/0x17a0 kernel/workqueue.c:2269
 worker_thread+0x9e/0x1050 kernel/workqueue.c:2415
 kthread+0x355/0x470 kernel/kthread.c:291
 ret_from_fork+0x22/0x30 arch/x86/entry/entry_64.S:293

The buggy address belongs to the object at ffff88800b796400
 which belongs to the cache kmalloc-512 of size 512
The buggy address is located 232 bytes inside of
 512-byte region [ffff88800b796400, ffff88800b796600)
The buggy address belongs to the page:
page:ffffea00002de500 refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 head:ffffea00002de500 order:2 compound_mapcount:0 compound_pincount:0
flags: 0x100000000010200(slab|head)
raw: 0100000000010200 dead000000000100 dead000000000122 ffff88806c402500
raw: 0000000000000000 0000000000100010 00000001ffffffff 0000000000000000
page dumped because: kasan: bad access detected

Memory state around the buggy address:
 ffff88800b796380: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
 ffff88800b796400: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
>ffff88800b796480: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
                                                          ^
 ffff88800b796500: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
 ffff88800b796580: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb

Fixes: caf7297e7a ("mlxsw: core: Introduce support for asynchronous EMAD register access")
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Reviewed-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-08-05 10:06:03 +02:00
Ido Schimmel
b7935969d2 mlxsw: core: Increase scope of RCU read-side critical section
[ Upstream commit 7d8e8f3433 ]

The lifetime of the Rx listener item ('rxl_item') is managed using RCU,
but is dereferenced outside of RCU read-side critical section, which can
lead to a use-after-free.

Fix this by increasing the scope of the RCU read-side critical section.

Fixes: 93c1edb27f ("mlxsw: Introduce Mellanox switch driver core")
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Reviewed-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-08-05 10:06:03 +02:00
Jakub Kicinski
111462ba8e mlx4: disable device on shutdown
[ Upstream commit 3cab8c6552 ]

It appears that not disabling a PCI device on .shutdown may lead to
a Hardware Error with particular (perhaps buggy) BIOS versions:

    mlx4_en: eth0: Close port called
    mlx4_en 0000:04:00.0: removed PHC
    reboot: Restarting system
    {1}[Hardware Error]: Hardware error from APEI Generic Hardware Error Source: 1
    {1}[Hardware Error]: event severity: fatal
    {1}[Hardware Error]:  Error 0, type: fatal
    {1}[Hardware Error]:   section_type: PCIe error
    {1}[Hardware Error]:   port_type: 4, root port
    {1}[Hardware Error]:   version: 1.16
    {1}[Hardware Error]:   command: 0x4010, status: 0x0143
    {1}[Hardware Error]:   device_id: 0000:00:02.2
    {1}[Hardware Error]:   slot: 0
    {1}[Hardware Error]:   secondary_bus: 0x04
    {1}[Hardware Error]:   vendor_id: 0x8086, device_id: 0x2f06
    {1}[Hardware Error]:   class_code: 000604
    {1}[Hardware Error]:   bridge: secondary_status: 0x2000, control: 0x0003
    {1}[Hardware Error]:   aer_uncor_status: 0x00100000, aer_uncor_mask: 0x00000000
    {1}[Hardware Error]:   aer_uncor_severity: 0x00062030
    {1}[Hardware Error]:   TLP Header: 40000018 040000ff 791f4080 00000000
[hw error repeats]
    Kernel panic - not syncing: Fatal hardware error!
    CPU: 0 PID: 2189 Comm: reboot Kdump: loaded Not tainted 5.6.x-blabla #1
    Hardware name: HP ProLiant DL380 Gen9/ProLiant DL380 Gen9, BIOS P89 05/05/2017

Fix the mlx4 driver.

This is a very similar problem to what had been fixed in:
commit 0d98ba8d70 ("scsi: hpsa: disable device during shutdown")
to address https://bugzilla.kernel.org/show_bug.cgi?id=199779.

Fixes: 2ba5fbd62b ("net/mlx4_core: Handle AER flow properly")
Reported-by: Jake Lawrence <lawja@fb.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-08-05 10:06:03 +02:00
Johan Hovold
ff94414fb6 net: lan78xx: fix transfer-buffer memory leak
[ Upstream commit 63634aa679 ]

The interrupt URB transfer-buffer was never freed on disconnect or after
probe errors.

Fixes: 55d7de9de6 ("Microchip's LAN7800 family USB 2/3 to 10/100/1000 Ethernet device driver")
Cc: Woojung.Huh@microchip.com <Woojung.Huh@microchip.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-08-05 10:06:03 +02:00
Johan Hovold
3c1add359a net: lan78xx: add missing endpoint sanity check
[ Upstream commit 8d8e95fd6d ]

Add the missing endpoint sanity check to prevent a NULL-pointer
dereference should a malicious device lack the expected endpoints.

Note that the driver has a broken endpoint-lookup helper,
lan78xx_get_endpoints(), which can end up accepting interfaces in an
altsetting without endpoints as long as *some* altsetting has a bulk-in
and a bulk-out endpoint.

Fixes: 55d7de9de6 ("Microchip's LAN7800 family USB 2/3 to 10/100/1000 Ethernet device driver")
Cc: Woojung.Huh@microchip.com <Woojung.Huh@microchip.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-08-05 10:06:02 +02:00
Eran Ben Elisha
ee9599af83 net/mlx5: Verify Hardware supports requested ptp function on a given pin
[ Upstream commit 071995c877 ]

Fix a bug where driver did not verify Hardware pin capabilities for
PTP functions.

Fixes: ee7f12205a ("net/mlx5e: Implement 1PPS support")
Signed-off-by: Eran Ben Elisha <eranbe@mellanox.com>
Reviewed-by: Ariel Levkovich <lariel@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-08-05 10:06:02 +02:00
Michael Karcher
93bfba8143 sh: Fix validation of system call number
[ Upstream commit 04a8a3d0a7 ]

The slow path for traced system call entries accessed a wrong memory
location to get the number of the maximum allowed system call number.
Renumber the numbered "local" label for the correct location to avoid
collisions with actual local labels.

Signed-off-by: Michael Karcher <kernel@mkarcher.dialup.fu-berlin.de>
Tested-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Fixes: f3a8308864 ("sh: Add a few missing irqflags tracing markers.")
Signed-off-by: Rich Felker <dalias@libc.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-08-05 10:06:02 +02:00
Tanner Love
7846460c1d selftests/net: psock_fanout: fix clang issues for target arch PowerPC
[ Upstream commit 64f9ede227 ]

Clang 9 threw:
warning: format specifies type 'unsigned short' but the argument has \
type 'int' [-Wformat]
                typeflags, PORT_BASE, PORT_BASE + port_off);

Tested: make -C tools/testing/selftests TARGETS="net" run_tests

Fixes: 77f65ebdca ("packet: packet fanout rollover during socket overload")
Signed-off-by: Tanner Love <tannerlove@google.com>
Acked-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-08-05 10:06:02 +02:00