"bool pvid" is unused since commit "net: dsa: lantiq_gswip: remove
legacy configure_vlan_while_not_filtering option".
"bool vlan_aware" shouldn't have a role in finding the bridge VLAN.
It should be identified by VID regardless of VLAN-aware or VLAN-unaware.
The driver sets up VID 0 for the VLAN-unaware PVID.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Link: https://patch.msgid.link/c63f89ca19269ef6c8bf00a62cacc739164b4441.1760566491.git.daniel@makrotopia.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
User space can force the altering of VID 0 as it was privately set up by
this driver.
For example, when the port joins a VLAN-aware bridge,
dsa_user_manage_vlan_filtering() will set NETIF_F_HW_VLAN_CTAG_FILTER.
If the port is subsequently brought up and CONFIG_VLAN_8021Q is enabled,
the vlan_vid0_add() function will want to make sure we are capable of
accepting packets tagged with VID 0.
Generally, DSA/switchdev drivers want to suppress that bit of help from
the 8021q layer, and handle VID 0 filters themselves. The 8021q layer
might actually be even detrimential, because VLANs added through
vlan_vid_add() pass through dsa_user_vlan_rx_add_vid(), which is
documented as this:
/* This API only allows programming tagged, non-PVID VIDs */
.flags = 0,
so it will force VID 0 to be reconfigured as egress-tagged, non-PVID.
Whereas the driver configures it as PVID and egress-untagged, the exact
opposite.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Link: https://patch.msgid.link/9f68340c34b5312c3b8c6c7ecf3cfce574a3f65d.1760566491.git.daniel@makrotopia.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The driver should now tolerate these changes, now that the PVID is
automatically recalculated on a VLAN awareness state change.
The VLAN-unaware PVID must be installed to hardware even if the
joined bridge is currently VLAN-aware. Otherwise, when the bridge VLAN
filtering state dynamically changes to VLAN-unaware later, this PVID
will be missing.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Link: https://patch.msgid.link/c58759074fb699581336dc2c2c6bf106257b134e.1760566491.git.daniel@makrotopia.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This driver doesn't support dynamic VLAN filtering changes, for simplicity.
It expects that on a port, either gswip_vlan_add_unaware() or
gswip_vlan_add_aware() is called, but not both.
When !br_vlan_enabled(), the configure_vlan_while_not_filtering = false
option is exactly what will prevent calls to gswip_port_vlan_add() from
being issued by DSA.
In fact, at the time these features were submitted:
https://patchwork.ozlabs.org/project/netdev/patch/20190501204506.21579-3-hauke@hauke-m.de/
"configure_vlan_while_not_filtering = false" did not even have a name,
it was implicit behaviour. It only became legacy in commit 54a0ed0df4
("net: dsa: provide an option for drivers to always receive bridge
VLANs").
Section "Bridge VLAN filtering" of Documentation/networking/switchdev.rst
describes the exact set of rules. Notably, the PVID of the port must
follow the VLAN awareness state of the bridge port. A VLAN-unaware
bridge port should not respond to the addition of a bridge VLAN with the
PVID flag. In fact, the pvid_change() test in
tools/testing/selftests/net/forwarding/bridge_vlan_unaware.sh tests
exactly this.
The lantiq_gswip driver indeed does not respond to the addition of PVID
VLANs while VLAN-unaware in the way described above, but only because of
configure_vlan_while_not_filtering. Our purpose here is to get rid of
configure_vlan_while_not_filtering, so we must add more complex logic
which follows the VLAN awareness state and walks through the Active VLAN
table entries, to find the index of the PVID register that should be
committed to hardware on each port.
As a side-effect of now having a proper implementation to assign the
PVID all the "VLAN upper: ..." tests of the local_termination.sh self-
tests which would previously all FAIL now all PASS (or XFAIL, but
that's ok).
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Tested-by: Daniel Golle <daniel@makrotopia.org>
Link: https://patch.msgid.link/47dab8a8b69ebb92624b9795b723114475d3fe4e.1760566491.git.daniel@makrotopia.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The two functions largely duplicate functionality. The differences
consist in:
- the "fid" passed to gswip_vlan_active_create(). The unaware variant
always passes -1, the aware variant passes fid = priv->vlans[i].fid,
where i is an index into priv->vlans[] for which priv->vlans[i].bridge
is equal to the given bridge.
- the "vid" is not passed to gswip_vlan_add_unaware(). It is implicitly
GSWIP_VLAN_UNAWARE_PVID (zero).
- The "untagged" is not passed to gswip_vlan_add_unaware(). It is
implicitly true. Also, the CPU port must not be a tag member of the
PVID used for VLAN-unaware bridging.
- The "pvid" is not passed to gswip_vlan_add_unaware(). It is implicitly
true.
- The GSWIP_PCE_DEFPVID(port) register is written by the aware variant
with an "idx", but with a hardcoded 0 by the unaware variant.
Merge the two functions into a single unified function without any
functional changes.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Link: https://patch.msgid.link/2be190701d4c17038ce4b8047f9fb0bdf8abdf6e.1760566491.git.daniel@makrotopia.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When idx == -1 in gswip_vlan_add(), we set vlan_mapping.val[0] = vid,
even though we do the exact same thing again outside the if/else block.
Remove the duplicate assignment.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Link: https://patch.msgid.link/039ecb48e038cea856a9a6230ad1543db2bc382d.1760566491.git.daniel@makrotopia.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Currently, the driver takes the bridge from dsa_port_bridge_dev_get(),
which only works for user ports. This is why it has to ignore FDB
entries installed on the CPU port.
Commit c26933639b ("net: dsa: request drivers to perform FDB
isolation") introduced the possibility of getting the originating bridge
from the passed dsa_db argument, so let's do that instead. This way, we
can act on the local FDB entries coming from the bridge.
Note that we do not expect FDB events for the DSA_DB_PORT database,
because this driver doesn't fulfill the dsa_switch_supports_uc_filtering()
requirements. So we can just return -EOPNOTSUPP and expect it will never
be triggered.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Link: https://patch.msgid.link/ed9d847c0356f0fec81422bdad9ebdcc6a59da79.1760566491.git.daniel@makrotopia.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQQ6NaUOruQGUkvPdG4raS+Z+3y5EwUCaPFVxwAKCRAraS+Z+3y5
E1yDAP98nxKLBFb9auLj8AV1zUNl4lKEpOIhH7ceXaDT7ucsagEAwvSbGAN5sun/
M0+sOpKEZwF8JBoRU8L61uYPYSu7XAk=
=2K9O
-----END PGP SIGNATURE-----
Merge tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next
Martin KaFai Lau says:
====================
pull-request: bpf-next 2025-10-16
We've added 6 non-merge commits during the last 1 day(s) which contain
a total of 18 files changed, 577 insertions(+), 38 deletions(-).
The main changes are:
1) Bypass the global per-protocol memory accounting either by setting
a netns sysctl or using bpf_setsockopt in a bpf program,
from Kuniyuki Iwashima.
* tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next:
selftests/bpf: Add test for sk->sk_bypass_prot_mem.
bpf: Introduce SK_BPF_BYPASS_PROT_MEM.
bpf: Support bpf_setsockopt() for BPF_CGROUP_INET_SOCK_CREATE.
net: Introduce net.core.bypass_prot_mem sysctl.
net: Allow opt-out from global protocol memory accounting.
tcp: Save lock_sock() for memcg in inet_csk_accept().
====================
Link: https://patch.msgid.link/20251016204539.773707-1-martin.lau@linux.dev
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Make tcp-md5 use the MD5 library API (added in 6.18) instead of the
crypto_ahash API. This is much simpler and also more efficient:
- The library API just operates on struct md5_ctx. Just allocate this
struct on the stack instead of using a pool of pre-allocated
crypto_ahash and ahash_request objects.
- The library API accepts standard pointers and doesn't require
scatterlists. So, for hashing the headers just use an on-stack buffer
instead of a pool of pre-allocated kmalloc'ed scratch buffers.
- The library API never fails. Therefore, checking for MD5 hashing
errors is no longer necessary. Update tcp_v4_md5_hash_skb(),
tcp_v6_md5_hash_skb(), tcp_v4_md5_hash_hdr(), tcp_v6_md5_hash_hdr(),
tcp_md5_hash_key(), tcp_sock_af_ops::calc_md5_hash, and
tcp_request_sock_ops::calc_md5_hash to return void instead of int.
- The library API provides direct access to the MD5 code, eliminating
unnecessary overhead such as indirect function calls and scatterlist
management. Microbenchmarks of tcp_v4_md5_hash_skb() on x86_64 show a
speedup from 7518 to 7041 cycles (6% fewer) with skb->len == 1440, or
from 1020 to 678 cycles (33% fewer) with skb->len == 140.
Since tcp_sigpool_hash_skb_data() can no longer be used, add a function
tcp_md5_hash_skb_data() which is specialized to MD5. Of course, to the
extent that this duplicates any code, it's well worth it.
To preserve the existing behavior of TCP-MD5 support being disabled when
the kernel is booted with "fips=1", make tcp_md5_do_add() check
fips_enabled itself. Previously it relied on the error from
crypto_alloc_ahash("md5") being bubbled up. I don't know for sure that
this is actually needed, but this preserves the existing behavior.
Tested with bidirectional TCP-MD5, both IPv4 and IPv6, between a kernel
that includes this commit and a kernel that doesn't include this commit.
(Side note: please don't use TCP-MD5! It's cryptographically weak. But
as long as Linux supports it, it might as well be implemented properly.)
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Link: https://patch.msgid.link/20251014215836.115616-1-ebiggers@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The io_uring functions return negative error values, but error() expects
these to be positive to properly match them to an errno string. Fix this
to make sure the correct error descriptions are displayed upon failure.
Signed-off-by: Carlos Llamas <cmllamas@google.com>
Link: https://patch.msgid.link/20251016182538.3790567-1-cmllamas@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
There's a good chance that more chip versions suffer from the same
hw issue. So let's reconfigure rx unconditionally before the chip reset
when resuming. This shouldn't have any side effect on unaffected chip
versions.
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Link: https://patch.msgid.link/a5c2e2d2-226f-4896-b8f6-45e2d91f0e24@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Quoting Eric Dumazet:
"I do not understand the fascination with net/core/drop_monitor.c [..]
misses all the features, flexibility, scalability that 'perf',
eBPF tracing, bpftrace, .... have today."
Reword DROP_MONITOR kconfig help text to clearly state that its not
related to perf-based drop monitoring and that its safe to disable
this unless support for the older netlink-based tools is needed.
Signed-off-by: Florian Westphal <fw@strlen.de>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20251016115147.18503-1-fw@strlen.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Xuanqiang Luo says:
====================
net: Avoid ehash lookup races
After replacing R/W locks with RCU in commit 3ab5aee7fe ("net: Convert
TCP & DCCP hash tables to use RCU / hlist_nulls"), a race window emerged
during the switch from reqsk/sk to sk/tw.
Now that both timewait sock (tw) and full sock (sk) reside on the same
ehash chain, it is appropriate to introduce hlist_nulls replace
operations, to eliminate the race conditions caused by this window.
Before this series of patches, I previously sent another version of the
patch, attempting to avoid the issue using a lock mechanism. However, it
seems there are some problems with that approach now, so I've switched to
the "replace" method in the current patches to resolve the issue.
For details, refer to:
https://lore.kernel.org/netdev/20250903024406.2418362-1-xuanqiang.luo@linux.dev/
Before I encountered this type of issue recently, I found there had been
several historical discussions about it. Therefore, I'm adding this
background information for those interested to reference:
1. https://lore.kernel.org/lkml/20230118015941.1313-1-kerneljasonxing@gmail.com/
2. https://lore.kernel.org/netdev/20230606064306.9192-1-duanmuquan@baidu.com/
====================
Link: https://patch.msgid.link/20251015020236.431822-1-xuanqiang.luo@linux.dev
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Since ehash lookups are lockless, if another CPU is converting sk to tw
concurrently, fetching the newly inserted tw with tw->tw_refcnt == 0 cause
lookup failure.
The call trace map is drawn as follows:
CPU 0 CPU 1
----- -----
inet_twsk_hashdance_schedule()
spin_lock()
inet_twsk_add_node_rcu(tw, ...)
__inet_lookup_established()
(find tw, failure due to tw_refcnt = 0)
__sk_nulls_del_node_init_rcu(sk)
refcount_set(&tw->tw_refcnt, 3)
spin_unlock()
By replacing sk with tw atomically via hlist_nulls_replace_init_rcu() after
setting tw_refcnt, we ensure that tw is either fully initialized or not
visible to other CPUs, eliminating the race.
It's worth noting that we held lock_sock() before the replacement, so
there's no need to check if sk is hashed. Thanks to Kuniyuki Iwashima!
Fixes: 3ab5aee7fe ("net: Convert TCP & DCCP hash tables to use RCU / hlist_nulls")
Reviewed-by: Kuniyuki Iwashima <kuniyu@google.com>
Reviewed-by: Jiayuan Chen <jiayuan.chen@linux.dev>
Signed-off-by: Xuanqiang Luo <luoxuanqiang@kylinos.cn>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20251015020236.431822-4-xuanqiang.luo@linux.dev
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Since ehash lookups are lockless, if one CPU performs a lookup while
another concurrently deletes and inserts (removing reqsk and inserting sk),
the lookup may fail to find the socket, an RST may be sent.
The call trace map is drawn as follows:
CPU 0 CPU 1
----- -----
inet_ehash_insert()
spin_lock()
sk_nulls_del_node_init_rcu(osk)
__inet_lookup_established()
(lookup failed)
__sk_nulls_add_node_rcu(sk, list)
spin_unlock()
As both deletion and insertion operate on the same ehash chain, this patch
introduces a new sk_nulls_replace_node_init_rcu() helper functions to
implement atomic replacement.
Fixes: 5e0724d027 ("tcp/dccp: fix hashdance race for passive sessions")
Reviewed-by: Kuniyuki Iwashima <kuniyu@google.com>
Reviewed-by: Jiayuan Chen <jiayuan.chen@linux.dev>
Signed-off-by: Xuanqiang Luo <luoxuanqiang@kylinos.cn>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20251015020236.431822-3-xuanqiang.luo@linux.dev
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add two functions to atomically replace RCU-protected hlist_nulls entries.
Keep using WRITE_ONCE() to assign values to ->next and ->pprev, as
mentioned in the patch below:
commit efd04f8a8b ("rcu: Use WRITE_ONCE() for assignments to ->next for
rculist_nulls")
commit 860c8802ac ("rcu: Use WRITE_ONCE() for assignments to ->pprev for
hlist_nulls")
Reviewed-by: Kuniyuki Iwashima <kuniyu@google.com>
Reviewed-by: Frederic Weisbecker <frederic@kernel.org>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Xuanqiang Luo <luoxuanqiang@kylinos.cn>
Link: https://patch.msgid.link/20251015020236.431822-2-xuanqiang.luo@linux.dev
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In {tcp6,udp6,raw6}_sock, struct ipv6_pinfo is always placed at
the beginning of a new cache line because
1. __alignof__(struct tcp_sock) is 64 due to ____cacheline_aligned
of __cacheline_group_begin(tcp_sock_write_tx)
2. __alignof__(struct udp_sock) is 64 due to ____cacheline_aligned
of struct numa_drop_counters
3. in raw6_sock, struct numa_drop_counters is placed before
struct ipv6_pinfo
. struct ipv6_pinfo is 136 bytes, but the last cache line is
only used by ipv6_fl_list:
$ pahole -C ipv6_pinfo vmlinux
struct ipv6_pinfo {
...
/* --- cacheline 2 boundary (128 bytes) --- */
struct ipv6_fl_socklist * ipv6_fl_list; /* 128 8 */
/* size: 136, cachelines: 3, members: 23 */
Let's move ipv6_fl_list from struct ipv6_pinfo to struct inet_sock
to save a full cache line for {tcp6,udp6,raw6}_sock.
Now, struct ipv6_pinfo is 128 bytes, and {tcp6,udp6,raw6}_sock have
64 bytes less, while {tcp,udp,raw}_sock retain the same size.
Before:
# grep -E "^(RAW|UDP[^L\-]|TCP)" /proc/slabinfo | awk '{print $1, "\t", $4}'
RAWv6 1408
UDPv6 1472
TCPv6 2560
RAW 1152
UDP 1280
TCP 2368
After:
# grep -E "^(RAW|UDP[^L\-]|TCP)" /proc/slabinfo | awk '{print $1, "\t", $4}'
RAWv6 1344
UDPv6 1408
TCPv6 2496
RAW 1152
UDP 1280
TCP 2368
Also, ipv6_fl_list and inet_flags (SNDFLOW bit) are placed in the
same cache line.
$ pahole -C inet_sock vmlinux
...
/* --- cacheline 11 boundary (704 bytes) was 56 bytes ago --- */
struct ipv6_pinfo * pinet6; /* 760 8 */
/* --- cacheline 12 boundary (768 bytes) --- */
struct ipv6_fl_socklist * ipv6_fl_list; /* 768 8 */
unsigned long inet_flags; /* 776 8 */
Doc churn is due to the insufficient Type column (only 1 space short).
Suggested-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20251014224210.2964778-1-kuniyu@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Théo Lebrun says:
====================
net: macb: various cleanups
Fix many oddities inside the MACB driver. They accumulated in my
work-in-progress branch while working on MACB/GEM EyeQ5 support.
Part of this series has been seen on the lkml in March then June.
See below for a semblance of a changelog.
The initial goal was to post them alongside EyeQ5 support, but that
makes for too big of a series. It'll come afterwards, with new
features (interrupt coalescing, ethtool .set_channels() and XDP mostly).
[0]: https://lore.kernel.org/lkml/20250627-macb-v2-0-ff8207d0bb77@bootlin.com/
====================
Link: https://patch.msgid.link/20251014-macb-cleanup-v1-0-31cd266e22cd@bootlin.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Local variable `count` is useless: it counts number of DMA descriptors
used and returns it. But the return value is only checked for error.
Drop counting the number of DMA descriptors and return a usual
negative-if-error integer.
Signed-off-by: Théo Lebrun <theo.lebrun@bootlin.com>
Link: https://patch.msgid.link/20251014-macb-cleanup-v1-13-31cd266e22cd@bootlin.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The pattern:
entry = macb_tx_ring_wrap(bp, i);
tx_skb = &queue->tx_skb[entry];
is the exact definition of:
macb_tx_skb(queue, i);
The pattern:
entry = macb_tx_ring_wrap(bp, i);
desc = macb_tx_desc(queue, entry);
is redundant because macb_tx_desc() calls macb_tx_ring_wrap().
One explicit call to macb_tx_ring_wrap() is still required for checking
if it is the last buffer (TX_WRAP case).
Signed-off-by: Théo Lebrun <theo.lebrun@bootlin.com>
Link: https://patch.msgid.link/20251014-macb-cleanup-v1-12-31cd266e22cd@bootlin.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Whenever min(a, b) is used with a and b unsigned variables or literals,
`make W=2` complains. Change four min() calls into umin().
stderr extract (GCC 11.2.0, MIPS Codescape):
./include/linux/minmax.h:68:57: warning: comparison is always true due
to limited range of data type [-Wtype-limits]
68 | #define __is_nonneg(ux) statically_true((long long)(ux) >= 0)
| ^~
drivers/net/ethernet/cadence/macb_main.c:2299:26: note: in expansion of
macro ‘min’
2299 | hdrlen = min(skb_headlen(skb), bp->max_tx_length);
| ^~~
Signed-off-by: Théo Lebrun <theo.lebrun@bootlin.com>
Link: https://patch.msgid.link/20251014-macb-cleanup-v1-11-31cd266e22cd@bootlin.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The low 16 bits of GEM_DCFG6 tell us which queues are enabled in HW. In
theory, there could be holes in the bitfield. In practice, the macb
driver would fail if there were holes as most loops iterate upon
bp->num_queues. Only macb_init() iterated correctly.
- Drop bp->queue_mask field.
- Error out at probe if a hole is in the queue mask.
- Rely upon bp->num_queues for iteration.
- As we drop the queue_mask probe local variable, fix RCT.
- Compute queue_mask on the fly for TAPRIO using bp->num_queues.
Signed-off-by: Théo Lebrun <theo.lebrun@bootlin.com>
Link: https://patch.msgid.link/20251014-macb-cleanup-v1-10-31cd266e22cd@bootlin.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Introduce macb_dma64() and macb_dma_ptp() helper functions.
Many codepaths are made simpler by dropping conditional compilation.
This implies two additional changes:
- Always compile related structure definitions inside <macb.h>.
- MACB_EXT_DESC can be dropped as it is useless now.
The common case:
#ifdef CONFIG_ARCH_DMA_ADDR_T_64BIT
struct macb_dma_desc_64 *desc_64;
if (bp->hw_dma_cap & HW_DMA_CAP_64B) {
desc_64 = macb_64b_desc(bp, desc);
// ...
}
#endif
Is replaced by:
if (macb_dma64(bp)) {
struct macb_dma_desc_64 *desc_64 = macb_64b_desc(bp, desc);
// ...
}
Signed-off-by: Théo Lebrun <theo.lebrun@bootlin.com>
Link: https://patch.msgid.link/20251014-macb-cleanup-v1-9-31cd266e22cd@bootlin.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Drop bp->hw_dma_cap field and put its two flags into bp->caps.
On my specific config (eyeq5_defconfig), bloat-o-meter indicates:
- macb_main.o: Before=56251, After=56359, chg +0.19%
- macb_ptp.o: Before= 3976, After= 3952, chg -0.60%
Signed-off-by: Théo Lebrun <theo.lebrun@bootlin.com>
Link: https://patch.msgid.link/20251014-macb-cleanup-v1-8-31cd266e22cd@bootlin.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The function body uses a switch statement on bp->hw_dma_cap and handles
its four possible values: 0, is_64b, is_ptp, is_64b && is_ptp.
Instead, refactor by noticing that the return value is:
desc_size * MULT
with MULT = 3 if is_64b && is_ptp,
2 if is_64b || is_ptp,
1 otherwise.
MULT can be expressed as:
1 + is_64b + is_ptp
Signed-off-by: Théo Lebrun <theo.lebrun@bootlin.com>
Link: https://patch.msgid.link/20251014-macb-cleanup-v1-7-31cd266e22cd@bootlin.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
macb_dma_desc_get_size() does a switch on bp->hw_dma_cap and covers all
four cases: 0, 64B, PTP, 64B+PTP. It also covers the #ifndef
MACB_EXT_DESC separately, making it four codepaths.
Instead, notice the descriptor size grows with enabled features and use
plain if-statements on 64B and PTP flags.
Signed-off-by: Théo Lebrun <theo.lebrun@bootlin.com>
Link: https://patch.msgid.link/20251014-macb-cleanup-v1-6-31cd266e22cd@bootlin.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Remove NULL checks on macb_config as it is always valid:
- either it is its default value &default_gem_config,
- or it got overridden using match data.
Reviewed-by: Sean Anderson <sean.anderson@linux.dev>
Signed-off-by: Théo Lebrun <theo.lebrun@bootlin.com>
Link: https://patch.msgid.link/20251014-macb-cleanup-v1-5-31cd266e22cd@bootlin.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Remove local variables clk_init and init. Those function pointers are
always equivalent to macb_config->clk_init and macb_config->init.
Reviewed-by: Sean Anderson <sean.anderson@linux.dev>
Signed-off-by: Théo Lebrun <theo.lebrun@bootlin.com>
Link: https://patch.msgid.link/20251014-macb-cleanup-v1-4-31cd266e22cd@bootlin.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Replace all capabilities values by calls to the BIT() macro.
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Sean Anderson <sean.anderson@linux.dev>
Signed-off-by: Théo Lebrun <theo.lebrun@bootlin.com>
Link: https://patch.msgid.link/20251014-macb-cleanup-v1-2-31cd266e22cd@bootlin.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Compatibles inside this enum are sorted-ish. Make it sorted.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Théo Lebrun <theo.lebrun@bootlin.com>
Link: https://patch.msgid.link/20251014-macb-cleanup-v1-1-31cd266e22cd@bootlin.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Eric Dumazet says:
====================
net: optimize TX throughput and efficiency
In this series, I replace the busylock spinlock we have in
__dev_queue_xmit() and use lockless list (llist) to reduce
spinlock contention to the minimum.
Idea is that only one cpu might spin on the qdisc spinlock,
while others simply add their skb in the llist.
After this series, we get a 300 % (4x) improvement on heavy TX workloads,
sending twice the number of packets per second, for half the cpu cycles.
====================
Link: https://patch.msgid.link/20251014171907.3554413-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Remove busylock spinlock and use a lockless list (llist)
to reduce spinlock contention to the minimum.
Idea is that only one cpu might spin on the qdisc spinlock,
while others simply add their skb in the llist.
After this patch, we get a 300 % improvement on heavy TX workloads.
- Sending twice the number of packets per second.
- While consuming 50 % less cycles.
Note that this also allows in the future to submit batches
to various qdisc->enqueue() methods.
Tested:
- Dual Intel(R) Xeon(R) 6985P-C (480 hyper threads).
- 100Gbit NIC, 30 TX queues with FQ packet scheduler.
- echo 64 >/sys/kernel/slab/skbuff_small_head/cpu_partial (avoid contention in mm)
- 240 concurrent "netperf -t UDP_STREAM -- -m 120 -n"
Before:
16 Mpps (41 Mpps if each thread is pinned to a different cpu)
vmstat 2 5
procs -----------memory---------- ---swap-- -----io---- -system-- ------cpu-----
r b swpd free buff cache si so bi bo in cs us sy id wa st
243 0 0 2368988672 51036 1100852 0 0 146 1 242 60 0 9 91 0 0
244 0 0 2368988672 51036 1100852 0 0 536 10 487745 14718 0 52 48 0 0
244 0 0 2368988672 51036 1100852 0 0 512 0 503067 46033 0 52 48 0 0
244 0 0 2368988672 51036 1100852 0 0 512 0 494807 12107 0 52 48 0 0
244 0 0 2368988672 51036 1100852 0 0 702 26 492845 10110 0 52 48 0 0
Lock contention (1 second sample taken on 8 cores)
perf lock record -C0-7 sleep 1; perf lock contention
contended total wait max wait avg wait type caller
442111 6.79 s 162.47 ms 15.35 us spinlock dev_hard_start_xmit+0xcd
5961 9.57 ms 8.12 us 1.60 us spinlock __dev_queue_xmit+0x3a0
244 560.63 us 7.63 us 2.30 us spinlock do_softirq+0x5b
13 25.09 us 3.21 us 1.93 us spinlock net_tx_action+0xf8
If netperf threads are pinned, spinlock stress is very high.
perf lock record -C0-7 sleep 1; perf lock contention
contended total wait max wait avg wait type caller
964508 7.10 s 147.25 ms 7.36 us spinlock dev_hard_start_xmit+0xcd
201 268.05 us 4.65 us 1.33 us spinlock __dev_queue_xmit+0x3a0
12 26.05 us 3.84 us 2.17 us spinlock do_softirq+0x5b
@__dev_queue_xmit_ns:
[256, 512) 21 | |
[512, 1K) 631 | |
[1K, 2K) 27328 |@ |
[2K, 4K) 265392 |@@@@@@@@@@@@@@@@ |
[4K, 8K) 417543 |@@@@@@@@@@@@@@@@@@@@@@@@@@ |
[8K, 16K) 826292 |@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@|
[16K, 32K) 733822 |@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@ |
[32K, 64K) 19055 |@ |
[64K, 128K) 17240 |@ |
[128K, 256K) 25633 |@ |
[256K, 512K) 4 | |
After:
29 Mpps (57 Mpps if each thread is pinned to a different cpu)
vmstat 2 5
procs -----------memory---------- ---swap-- -----io---- -system-- ------cpu-----
r b swpd free buff cache si so bi bo in cs us sy id wa st
78 0 0 2369573632 32896 1350988 0 0 22 0 331 254 0 8 92 0 0
75 0 0 2369573632 32896 1350988 0 0 22 50 425713 280199 0 23 76 0 0
104 0 0 2369573632 32896 1350988 0 0 290 0 430238 298247 0 23 76 0 0
86 0 0 2369573632 32896 1350988 0 0 132 0 428019 291865 0 24 76 0 0
90 0 0 2369573632 32896 1350988 0 0 502 0 422498 278672 0 23 76 0 0
perf lock record -C0-7 sleep 1; perf lock contention
contended total wait max wait avg wait type caller
2524 116.15 ms 486.61 us 46.02 us spinlock __dev_queue_xmit+0x55b
5821 107.18 ms 371.67 us 18.41 us spinlock dev_hard_start_xmit+0xcd
2377 9.73 ms 35.86 us 4.09 us spinlock ___slab_alloc+0x4e0
923 5.74 ms 20.91 us 6.22 us spinlock ___slab_alloc+0x5c9
121 3.42 ms 193.05 us 28.24 us spinlock net_tx_action+0xf8
6 564.33 us 167.60 us 94.05 us spinlock do_softirq+0x5b
If netperf threads are pinned (~54 Mpps)
perf lock record -C0-7 sleep 1; perf lock contention
32907 316.98 ms 195.98 us 9.63 us spinlock dev_hard_start_xmit+0xcd
4507 61.83 ms 212.73 us 13.72 us spinlock __dev_queue_xmit+0x554
2781 23.53 ms 40.03 us 8.46 us spinlock ___slab_alloc+0x5c9
3554 18.94 ms 34.69 us 5.33 us spinlock ___slab_alloc+0x4e0
233 9.09 ms 215.70 us 38.99 us spinlock do_softirq+0x5b
153 930.66 us 48.67 us 6.08 us spinlock net_tx_action+0xfd
84 331.10 us 14.22 us 3.94 us spinlock ___slab_alloc+0x5c9
140 323.71 us 9.94 us 2.31 us spinlock ___slab_alloc+0x4e0
@__dev_queue_xmit_ns:
[128, 256) 1539830 |@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@ |
[256, 512) 2299558 |@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@|
[512, 1K) 483936 |@@@@@@@@@@ |
[1K, 2K) 265345 |@@@@@@ |
[2K, 4K) 145463 |@@@ |
[4K, 8K) 54571 |@ |
[8K, 16K) 10270 | |
[16K, 32K) 9385 | |
[32K, 64K) 7749 | |
[64K, 128K) 26799 | |
[128K, 256K) 2665 | |
[256K, 512K) 665 | |
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Toke Høiland-Jørgensen <toke@redhat.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@google.com>
Tested-by: Jamal Hadi Salim <jhs@mojatatu.com>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Link: https://patch.msgid.link/20251014171907.3554413-7-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Replace state2 field with a boolean.
Move it to a hole between qstats and state so that
we shrink Qdisc by a full cache line.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@google.com>
Reviewed-by: Toke Høiland-Jørgensen <toke@redhat.com>
Tested-by: Jamal Hadi Salim <jhs@mojatatu.com>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Link: https://patch.msgid.link/20251014171907.3554413-6-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This reverts commits 0f022d32c3
and 44180feacc.
Prior patch in this series implemented loop detection
in act_mirred, we can remove q->owner to save some cycles
in the fast path.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@google.com>
Reviewed-by: Toke Høiland-Jørgensen <toke@redhat.com>
Reviewed-by: Victor Nogueira <victor@mojatatu.com>
Tested-by: Jamal Hadi Salim <jhs@mojatatu.com>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Link: https://patch.msgid.link/20251014171907.3554413-5-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Commit 0f022d32c3 ("net/sched: Fix mirred deadlock on device recursion")
added code in the fast path, even when act_mirred is not used.
Prepare its revert by implementing loop detection in act_mirred.
Adds an array of device pointers in struct netdev_xmit.
tcf_mirred_is_act_redirect() can detect if the array
already contains the target device.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@google.com>
Reviewed-by: Toke Høiland-Jørgensen <toke@redhat.com>
Tested-by: Jamal Hadi Salim <jhs@mojatatu.com>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Link: https://patch.msgid.link/20251014171907.3554413-4-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
While stress testing UDP senders on a host with expensive indirect
calls, I found cpus processing TX completions where showing
a very high cost (20%) in sock_wfree() due to
CONFIG_MITIGATION_RETPOLINE=y.
Take care of TCP and UDP TX destructors and use INDIRECT_CALL_3() macro.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@google.com>
Reviewed-by: Toke Høiland-Jørgensen <toke@redhat.com>
Tested-by: Jamal Hadi Salim <jhs@mojatatu.com>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Link: https://patch.msgid.link/20251014171907.3554413-3-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This test fails the first time I am running it after a fresh virtme-ng boot.
tcp_user_timeout_user-timeout-probe.pkt:33: runtime error in write call: Expected result -1 but got 24 with errno 2 (No such file or directory)
Tweaks the timings a bit, to reduce flakiness.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Soham Chakradeo <sohamch@google.com>
Cc: Willem de Bruijn <willemb@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@google.com>
Tested-by: Jamal Hadi Salim <jhs@mojatatu.com>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Link: https://patch.msgid.link/20251014171907.3554413-2-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add documentation for the interconnect and interconnect-names
properties required when voting for AHB and AXI buses.
Suggested-by: Andrew Halaney <ahalaney@redhat.com>
Signed-off-by: Sagar Cheluvegowda <quic_scheluve@quicinc.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://patch.msgid.link/20251015-topic-qc_stmmac_icc_bindings-v5-1-da39126cff28@oss.qualcomm.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add Ethernet controller support for Eswin's eic7700 SoC. The driver
implements hardware initialization, clock configuration, delay
adjustment functions based on DWC Ethernet controller, and supports
device tree configuration and platform driver integration.
Signed-off-by: Zhi Li <lizhi2@eswincomputing.com>
Signed-off-by: Shangjuan Wei <weishangjuan@eswincomputing.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20251015114101.1218-1-weishangjuan@eswincomputing.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Russell King says:
====================
net: stmmac: more cleanups
The subject for the cover message is wearing thin as I've used it a
number of times, but the scope for cleaning up the driver continues,
and continue it will do, because this is just a small fraction of the
queue.
1. make a better job of one of my previous commits, moving the holding
of the lock into stmmac_mdio.c
2. move the mac_finish() method to be in-order with the layout of
struct phylink_mac_ops - this order was chosen because it reflects
the order that the methods are called, thus making the flow more
obvious when reading code.
3. continuing on the "removal of stuff that doesn't need to happen",
patch 3 removes the phylink_speed_(up|down) out of the path that
is used for MTU changes - we really don't need to fiddle with the
PHY advertisement when changing the MTU!
4. clean up tc_init()'s initialisation of flow_entries_max - this is
the sole place that this is written, and we might as well make the
code more easy to follow.
5. stmmac_phy_setup() really confuses me when I read the code, it's
not really about PHY setup, but about phylink setup. So, name its
name reflect its functionality.
====================
Link: https://patch.msgid.link/aO_HIwT_YvxkDS8D@shell.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
stmmac_phy_setup() does not set up any PHY, but does setup phylink.
Rename this function to stmmac_phylink_setup() to reflect more what
it is doing.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Reviewed-by: Gatien Chevallier <gatien.chevallier@foss.st.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/E1v945d-0000000Ameh-3Bs7@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
To make future changes easier, rearrange the use of dma_cap->l3l4fnum
vs priv->flow_entries_max.
Always initialise priv->flow_entries_max from dma_cap->l3l4fnum, then
use priv->flow_entries_max to determine whether we allocate
priv->flow_entries and set it up.
This change is safe because tc_init() is only called once from
stmmac_dvr_probe().
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Link: https://patch.msgid.link/E1v945Y-0000000Ameb-2gDI@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
