An integer overflow occurs in cfg80211_calculate_bitrate_he() when
calculating bitrates for high throughput HE configurations.
For example, with 160 MHz bandwidth, HE-MCS 13, HE-NSS 4, and HE-GI 0,
the multiplication (result * rate->nss) overflows the 32-bit 'result'
variable before division by 8, leading to significantly underestimated
bitrate values.
The overflow occurs because the NSS multiplication operates on a 32-bit
integer that cannot accommodate intermediate values exceeding
4,294,967,295. When overflow happens, the value wraps around, producing
incorrect bitrates for high MCS and NSS combinations.
Fix this by utilizing the 64-bit 'tmp' variable for the NSS
multiplication and subsequent divisions via do_div(). This approach
preserves full precision throughout the entire calculation, with the
final value assigned to 'result' only after completing all operations.
Signed-off-by: Veerendranath Jakkam <veerendranath.jakkam@oss.qualcomm.com>
Link: https://patch.msgid.link/20260109-he_bitrate_overflow-v1-1-95575e466b6e@oss.qualcomm.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
The struct ieee80211_vif contains trailing space for vif driver data,
when struct ieee80211_vif is allocated, the total memory size that is
allocated is sizeof(struct ieee80211_vif) + size of vif driver data.
The size of vif driver data is set by each WiFi driver as needed.
The RSI911x driver does not set vif driver data size, no trailing space
for vif driver data is therefore allocated past struct ieee80211_vif .
The RSI911x driver does however use the vif driver data to store its
vif driver data structure "struct vif_priv". An access to vif->drv_priv
leads to access out of struct ieee80211_vif bounds and corruption of
some memory.
In case of the failure observed locally, rsi_mac80211_add_interface()
would write struct vif_priv *vif_info = (struct vif_priv *)vif->drv_priv;
vif_info->vap_id = vap_idx. This write corrupts struct fq_tin member
struct list_head new_flows . The flow = list_first_entry(head, struct
fq_flow, flowchain); in fq_tin_reset() then reports non-NULL bogus
address, which when accessed causes a crash.
The trigger is very simple, boot the machine with init=/bin/sh , mount
devtmpfs, sysfs, procfs, and then do "ip link set wlan0 up", "sleep 1",
"ip link set wlan0 down" and the crash occurs.
Fix this by setting the correct size of vif driver data, which is the
size of "struct vif_priv", so that memory is allocated and the driver
can store its driver data in it, instead of corrupting memory around
it.
Cc: stable@vger.kernel.org
Fixes: dad0d04fa7 ("rsi: Add RS9113 wireless driver")
Signed-off-by: Marek Vasut <marex@nabladev.com>
Link: https://patch.msgid.link/20260109235817.150330-1-marex@nabladev.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Current release - fix to a fix:
- net: do not write to msg_get_inq in callee
- arp: do not assume dev_hard_header() does not change skb->head
Current release - regressions:
- wifi: mac80211: don't iterate not running interfaces
- eth: mlx5: fix NULL pointer dereference in ioctl module EEPROM
Current release - new code bugs:
- eth: bnge: add AUXILIARY_BUS to Kconfig dependencies
Previous releases - regressions:
- eth: mlx5: dealloc forgotten PSP RX modify header
Previous releases - always broken:
- ping: fix ICMP out SNMP stats double-counting with ICMP sockets
- bonding: preserve NETIF_F_ALL_FOR_ALL across TSO updates
- bridge: fix C-VLAN preservation in 802.1ad vlan_tunnel egress
- eth: bnxt: fix potential data corruption with HW GRO/LRO
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=vR9r
-----END PGP SIGNATURE-----
Merge tag 'net-6.19-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from netfilter and wireless.
Current release - fix to a fix:
- net: do not write to msg_get_inq in callee
- arp: do not assume dev_hard_header() does not change skb->head
Current release - regressions:
- wifi: mac80211: don't iterate not running interfaces
- eth: mlx5: fix NULL pointer dereference in ioctl module EEPROM
Current release - new code bugs:
- eth: bnge: add AUXILIARY_BUS to Kconfig dependencies
Previous releases - regressions:
- eth: mlx5: dealloc forgotten PSP RX modify header
Previous releases - always broken:
- ping: fix ICMP out SNMP stats double-counting with ICMP sockets
- bonding: preserve NETIF_F_ALL_FOR_ALL across TSO updates
- bridge: fix C-VLAN preservation in 802.1ad vlan_tunnel egress
- eth: bnxt: fix potential data corruption with HW GRO/LRO"
* tag 'net-6.19-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (70 commits)
arp: do not assume dev_hard_header() does not change skb->head
net: enetc: fix build warning when PAGE_SIZE is greater than 128K
atm: Fix dma_free_coherent() size
tools: ynl: don't install tests
net: do not write to msg_get_inq in callee
bnxt_en: Fix NULL pointer crash in bnxt_ptp_enable during error cleanup
net: usb: pegasus: fix memory leak in update_eth_regs_async()
net: 3com: 3c59x: fix possible null dereference in vortex_probe1()
net/sched: sch_qfq: Fix NULL deref when deactivating inactive aggregate in qfq_reset
wifi: mac80211: collect station statistics earlier when disconnect
wifi: mac80211: restore non-chanctx injection behaviour
wifi: mac80211_hwsim: disable BHs for hwsim_radio_lock
wifi: mac80211: don't iterate not running interfaces
wifi: mac80211_hwsim: fix typo in frequency notification
wifi: avoid kernel-infoleak from struct iw_point
net: airoha: Fix schedule while atomic in airoha_ppe_deinit()
selftests: netdevsim: add carrier state consistency test
net: netdevsim: fix inconsistent carrier state after link/unlink
selftests: drv-net: Bring back tool() to driver __init__s
net/sched: act_api: avoid dereferencing ERR_PTR in tcf_idrinfo_destroy
...
Tony Nguyen says:
====================
Intel Wired LAN Driver Updates 2026-01-06 (idpf)
This series contains updates to idpf driver only.
Emil fixes issues related to resets; among them timeouts, NULL pointer
dereferences, and memory leaks.
Sreedevi resolves issues around RSS; mainly involving operations when
the interface is down and resets. She also addresses some incomplete
cleanups for ntuple filters and interrupts.
Erik fixes incomplete output of ntuple filters.
Josh sets restriction of Rx buffer size to follow hardware restrictions.
Larysa adds check to prevent NULL pointer dereference when RDMA is not
enabled.
* '200GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue:
idpf: fix aux device unplugging when rdma is not supported by vport
idpf: cap maximum Rx buffer size
idpf: Fix error handling in idpf_vport_open()
idpf: Fix RSS LUT NULL ptr issue after soft reset
idpf: Fix RSS LUT configuration on down interfaces
idpf: Fix RSS LUT NULL pointer crash on early ethtool operations
idpf: fix issue with ethtool -n command display
idpf: fix memory leak of flow steer list on rmmod
idpf: fix error handling in the init_task on load
idpf: fix memory leak in idpf_vc_core_deinit()
idpf: fix memory leak in idpf_vport_rel()
idpf: detach and close netdevs while handling a reset
idpf: keep the netdev when a reset fails
====================
Link: https://patch.msgid.link/20260107000648.1861994-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The max buffer size of ENETC RX BD is 0xFFFF bytes, so if the PAGE_SIZE
is greater than 128K, ENETC_RXB_DMA_SIZE and ENETC_RXB_DMA_SIZE_XDP will
be greater than 0xFFFF, thus causing a build warning.
This will not cause any practical issues because ENETC is currently only
used on the ARM64 platform, and the max PAGE_SIZE is 64K. So this patch
is only for fixing the build warning that occurs when compiling ENETC
drivers for other platforms.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202601050637.kHEKKOG7-lkp@intel.com/
Fixes: e59bc32df2 ("net: enetc: correct the value of ENETC_RXB_TRUESIZE")
Signed-off-by: Wei Fang <wei.fang@nxp.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/20260107091204.1980222-1-wei.fang@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
- mac80211:
- long-standing injection bug due to chanctx rework
- more recent interface iteration issue
- collect statistics before removing stations
- hwsim:
- fix NAN frequency typo (potential NULL ptr deref)
- fix locking of radio lock (needs softirqs disabled)
- wext:
- ancient issue with compat and events copying some
uninitialized stack data to userspace
-----BEGIN PGP SIGNATURE-----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=KKD4
-----END PGP SIGNATURE-----
Merge tag 'wireless-2026-01-08' of https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless
Johannes Berg says:
====================
Couple of fixes:
- mac80211:
- long-standing injection bug due to chanctx rework
- more recent interface iteration issue
- collect statistics before removing stations
- hwsim:
- fix NAN frequency typo (potential NULL ptr deref)
- fix locking of radio lock (needs softirqs disabled)
- wext:
- ancient issue with compat and events copying some
uninitialized stack data to userspace
* tag 'wireless-2026-01-08' of https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless:
wifi: mac80211: collect station statistics earlier when disconnect
wifi: mac80211: restore non-chanctx injection behaviour
wifi: mac80211_hwsim: disable BHs for hwsim_radio_lock
wifi: mac80211: don't iterate not running interfaces
wifi: mac80211_hwsim: fix typo in frequency notification
wifi: avoid kernel-infoleak from struct iw_point
====================
Link: https://patch.msgid.link/20260108140141.139687-3-johannes@sipsolutions.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The size of the buffer is not the same when alloc'd with
dma_alloc_coherent() in he_init_tpdrq() and freed.
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Cc: <stable@vger.kernel.org>
Signed-off-by: Thomas Fourier <fourier.thomas@gmail.com>
Link: https://patch.msgid.link/20260107090141.80900-2-fourier.thomas@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
make's install target is meant for installing the production
artifacts, AFAIU. Don't install test_ynl_cli and test_ynl_ethtool
from under the main YNL install target. The install target
under tests/ is retained in case someone wants the tests
to be installed.
Fixes: 308b7dee3e ("tools: ynl: add YNL test framework")
Reviewed-by: Hangbin Liu <liuhangbin@gmail.com>
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Link: https://patch.msgid.link/20260106163426.1468943-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
NULL pointer dereference fix.
msg_get_inq is an input field from caller to callee. Don't set it in
the callee, as the caller may not clear it on struct reuse.
This is a kernel-internal variant of msghdr only, and the only user
does reinitialize the field. So this is not critical for that reason.
But it is more robust to avoid the write, and slightly simpler code.
And it fixes a bug, see below.
Callers set msg_get_inq to request the input queue length to be
returned in msg_inq. This is equivalent to but independent from the
SO_INQ request to return that same info as a cmsg (tp->recvmsg_inq).
To reduce branching in the hot path the second also sets the msg_inq.
That is WAI.
This is a fix to commit 4d1442979e ("af_unix: don't post cmsg for
SO_INQ unless explicitly asked for"), which fixed the inverse.
Also avoid NULL pointer dereference in unix_stream_read_generic if
state->msg is NULL and msg->msg_get_inq is written. A NULL state->msg
can happen when splicing as of commit 2b514574f7 ("net: af_unix:
implement splice for stream af_unix sockets").
Also collapse two branches using a bitwise or.
Cc: stable@vger.kernel.org
Fixes: 4d1442979e ("af_unix: don't post cmsg for SO_INQ unless explicitly asked for")
Link: https://lore.kernel.org/netdev/willemdebruijn.kernel.24d8030f7a3de@gmail.com/
Signed-off-by: Willem de Bruijn <willemb@google.com>
Reviewed-by: Jens Axboe <axboe@kernel.dk>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20260106150626.3944363-1-willemdebruijn.kernel@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When bnxt_init_one() fails during initialization (e.g.,
bnxt_init_int_mode returns -ENODEV), the error path calls
bnxt_free_hwrm_resources() which destroys the DMA pool and sets
bp->hwrm_dma_pool to NULL. Subsequently, bnxt_ptp_clear() is called,
which invokes ptp_clock_unregister().
Since commit a60fc3294a ("ptp: rework ptp_clock_unregister() to
disable events"), ptp_clock_unregister() now calls
ptp_disable_all_events(), which in turn invokes the driver's .enable()
callback (bnxt_ptp_enable()) to disable PTP events before completing the
unregistration.
bnxt_ptp_enable() attempts to send HWRM commands via bnxt_ptp_cfg_pin()
and bnxt_ptp_cfg_event(), both of which call hwrm_req_init(). This
function tries to allocate from bp->hwrm_dma_pool, causing a NULL
pointer dereference:
bnxt_en 0000:01:00.0 (unnamed net_device) (uninitialized): bnxt_init_int_mode err: ffffffed
KASAN: null-ptr-deref in range [0x0000000000000028-0x000000000000002f]
Call Trace:
__hwrm_req_init (drivers/net/ethernet/broadcom/bnxt/bnxt_hwrm.c:72)
bnxt_ptp_enable (drivers/net/ethernet/broadcom/bnxt/bnxt_ptp.c:323 drivers/net/ethernet/broadcom/bnxt/bnxt_ptp.c:517)
ptp_disable_all_events (drivers/ptp/ptp_chardev.c:66)
ptp_clock_unregister (drivers/ptp/ptp_clock.c:518)
bnxt_ptp_clear (drivers/net/ethernet/broadcom/bnxt/bnxt_ptp.c:1134)
bnxt_init_one (drivers/net/ethernet/broadcom/bnxt/bnxt.c:16889)
Lines are against commit f8f9c1f4d0 ("Linux 6.19-rc3")
Fix this by clearing and unregistering ptp (bnxt_ptp_clear()) before
freeing HWRM resources.
Suggested-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Signed-off-by: Breno Leitao <leitao@debian.org>
Fixes: a60fc3294a ("ptp: rework ptp_clock_unregister() to disable events")
Cc: stable@vger.kernel.org
Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Link: https://patch.msgid.link/20260106-bnxt-v3-1-71f37e11446a@debian.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When asynchronously writing to the device registers and if usb_submit_urb()
fail, the code fail to release allocated to this point resources.
Fixes: 323b34963d ("drivers: net: usb: pegasus: fix control urb submission")
Signed-off-by: Petko Manolov <petkan@nucleusys.com>
Link: https://patch.msgid.link/20260106084821.3746677-1-petko.manolov@konsulko.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
pdev can be null and free_ring: can be called in 1297 with a null
pdev.
Fixes: 55c82617c3 ("3c59x: convert to generic DMA API")
Cc: <stable@vger.kernel.org>
Signed-off-by: Thomas Fourier <fourier.thomas@gmail.com>
Link: https://patch.msgid.link/20260106094731.25819-2-fourier.thomas@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=s/hE
-----END PGP SIGNATURE-----
Merge tag 'hid-for-linus-2026010801' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid
Pull HID fixes from Jiri Kosina:
- build fix for HID-BPF (Benjamin Tissoires)
- fix for potential buffer overflow in i2c-hid (Kwok Kin Ming)
- a couple of selftests/hid fixes (Peter Hutterer)
- fix for handling pressure pads in hid-multitouch (Peter Hutterer)
- fix for potential NULL pointer dereference in intel-thc-hid (Even Xu)
- fix for interrupt delay control in intel-thc-hid (Even Xu)
- fix finger release detection on some VTL-class touchpads (DaytonCL)
- fix for correct enumeration on intel-ish-hid systems with no sensors
(Zhang Lixu)
- assorted device ID additions and device-specific quirks
* tag 'hid-for-linus-2026010801' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid: (21 commits)
HID: logitech: add HID++ support for Logitech MX Anywhere 3S
HID: Elecom: Add support for ELECOM M-XT3DRBK (018C)
HID: quirks: work around VID/PID conflict for appledisplay
HID: Apply quirk HID_QUIRK_ALWAYS_POLL to Edifier QR30 (2d99:a101)
HID: i2c-hid: fix potential buffer overflow in i2c_hid_get_report()
selftests/hid: add a test for the Digitizer/Button Type pressurepad
selftests/hid: use a enum class for the different button types
selftests/hid: require hidtools 0.12
HID: multitouch: set INPUT_PROP_PRESSUREPAD based on Digitizer/Button Type
HID: quirks: Add another Chicony HP 5MP Cameras to hid_ignore_list
HID: Intel-thc-hid: Intel-thc: Add safety check for reading DMA buffer
hid: intel-thc-hid: Select SGL_ALLOC
selftests/hid: fix bpf compilations due to -fms-extensions
HID: bpf: fix bpf compilation with -fms-extensions
HID: Intel-thc-hid: Intel-thc: Fix wrong register reading
HID: multitouch: add MT_QUIRK_STICKY_FINGERS to MT_CLS_VTL
HID: intel-ish-hid: Reset enum_devices_done before enumeration
HID: intel-ish-hid: Update ishtp bus match to support device ID table
HID: Intel-thc-hid: Intel-thc: fix dma_unmap_sg() nents value
HID: playstation: Center initial joystick axes to prevent spurious events
...
A collection of small device-specific fixes.
* ASoC Intel topology fixes for conflicting Bluetooth bits
* Cleanups of ASoC drivers for superfluous NULL checks
* Fix for error handling in the AC97 bus
* A regression fix for TAS2781 speaker ID handling
* HD-audio quirks
-----BEGIN PGP SIGNATURE-----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=S57y
-----END PGP SIGNATURE-----
Merge tag 'sound-6.19-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"A collection of small device-specific fixes:
- ASoC Intel topology fixes for conflicting Bluetooth bits
- Cleanups of ASoC drivers for superfluous NULL checks
- Fix for error handling in the AC97 bus
- A regression fix for TAS2781 speaker ID handling
- HD-audio quirks"
* tag 'sound-6.19-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
ALSA: hda/realtek: add HP Laptop 15s-eq1xxx mute LED quirk
ALSA: hda/realtek: Add quirk for Acer Nitro AN517-55
ALSA: hda/tas2781: properly initialize speaker_id for TAS2563
ALSA: ac97: fix a double free in snd_ac97_controller_register()
ASoC: sun4i-spdif: Add missing kerneldoc fields for sun4i_spdif_quirks
ASoC: codecs: pm4125: clean up bind() device reference handling
ASoC: soc_sdw_utils: drop bogus container_of() error handling
ASoC: codecs: wcd937x: drop bogus container_of() error handling
ASoC: codecs: pm4125: drop bogus container_of() error handling
ASoC: SOF: Intel: add -bt tplg suffix if BT is present
ASoC: Intel: sof_sdw: shift SSP BT mask bits.
In __sta_info_destroy_part2(), station statistics are requested after the
IEEE80211_STA_NONE -> IEEE80211_STA_NOTEXIST transition. This is
problematic because the driver may be unable to handle the request due to
the STA being in the NOTEXIST state (i.e. if the driver destroys the
underlying data when transitioning to NOTEXIST).
Move the statistics collection to before the state transition to avoid
this issue.
Signed-off-by: Baochen Qiang <baochen.qiang@oss.qualcomm.com>
Link: https://patch.msgid.link/20251222-mac80211-move-station-stats-collection-earlier-v1-1-12cd4e42c633@oss.qualcomm.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
During the transition to use channel contexts throughout, the
ability to do injection while in monitor mode concurrent with
another interface was lost, since the (virtual) monitor won't
have a chanctx assigned in this scenario.
It's harder to fix drivers that actually transitioned to using
channel contexts themselves, such as mt76, but it's easy to do
those that are (still) just using the emulation. Do that.
Cc: stable@vger.kernel.org
Link: https://bugzilla.kernel.org/show_bug.cgi?id=218763
Reported-and-tested-by: Oscar Alfonso Diaz <oscar.alfonso.diaz@gmail.com>
Fixes: 0a44dfc070 ("wifi: mac80211: simplify non-chanctx drivers")
Link: https://patch.msgid.link/20251216105242.18366-2-johannes@sipsolutions.net
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
for_each_chanctx_user_* was introdcued as a replacement for
for_each_sdata_link, which visits also other chanctx users that are not
link.
for_each_sdata_link skips not running interfaces, do the same for
for_each_chanctx_user_*
Fixes: 1ce954c98b ("wifi: mac80211: add and use chanctx usage iteration")
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20260107143736.55c084e2a976.I38b7b904a135dadca339321923b501b2c2c5c8c0@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
The NAN notification is for 5745 MHz which corresponds to channel 149
and not 5475 which is not actually a valid channel. This could result in
a NULL pointer dereference in cfg80211_next_nan_dw_notif.
Fixes: a37a6f5443 ("wifi: mac80211_hwsim: Add simulation support for NAN device")
Signed-off-by: Benjamin Berg <benjamin.berg@intel.com>
Reviewed-by: Ilan Peer <ilan.peer@intel.com>
Reviewed-by: Miriam Rachel Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20260107143652.7dab2035836f.Iacbaf7bb94ed5c14a0928a625827e4137d8bfede@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
I've acquired a Logitech MX Anywhere 3S mouse, which supports HID++ over
Bluetooth. Adding its PID 0xb037 to the allowlist enables the additional
features, such as high-resolution scrolling. Tested working across multiple
machines, with a mix of Intel and Mediatek Bluetooth chips.
[jkosina@suse.com: standardize shortlog]
Signed-off-by: Dennis Marttinen <twelho@welho.tech>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
airoha_ppe_deinit() runs airoha_npu_ppe_deinit() in atomic context.
airoha_npu_ppe_deinit routine allocates ppe_data buffer with GFP_KERNEL
flag. Rely on rcu_replace_pointer in airoha_ppe_deinit routine in order
to fix schedule while atomic issue in airoha_npu_ppe_deinit() since we
do not need atomic context there.
Fixes: 00a7678310 ("net: airoha: Introduce flowtable offload support")
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Link: https://patch.msgid.link/20260105-airoha-fw-ethtool-v2-1-3b32b158cc31@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
For years I wondered why the Apple Cinema Display driver would not
just work for me. Turns out the hidraw driver instantly takes it
over. Fix by adding appledisplay VID/PIDs to hid_have_special_driver.
Fixes: 069e8a65cd ("Driver for Apple Cinema Display")
Signed-off-by: René Rebe <rene@exactco.de>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
The USB speaker has a bug that causes it to reboot when changing the
brightness using the physical knob.
Add a new vendor and product ID entry in hid-ids.h, and register
the corresponding device in hid-quirks.c with the required quirk.
Signed-off-by: Rodrigo Lugathe da Conceição Alves <lugathe2@gmail.com>
Reviewed-by: Terry Junge <linuxhid@cosmicgizmosystems.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
`i2c_hid_xfer` is used to read `recv_len + sizeof(__le16)` bytes of data
into `ihid->rawbuf`.
The former can come from the userspace in the hidraw driver and is only
bounded by HID_MAX_BUFFER_SIZE(16384) by default (unless we also set
`max_buffer_size` field of `struct hid_ll_driver` which we do not).
The latter has size determined at runtime by the maximum size of
different report types you could receive on any particular device and
can be a much smaller value.
Fix this by truncating `recv_len` to `ihid->bufsize - sizeof(__le16)`.
The impact is low since access to hidraw devices requires root.
Signed-off-by: Kwok Kin Ming <kenkinming2002@gmail.com>
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
We have to resort to a bit of a hack: python-libevdev gets the
properties from libevdev at module init time. If libevdev hasn't been
rebuilt with the new property it won't be automatically populated. So we
hack around this by constructing the property manually.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
Instead of multiple spellings of a string-provided argument, let's make
this a tad more type-safe and use an enum here.
And while we do this fix the two wrong devices:
- elan_04f3_313a (HP ZBook Fury 15) is discrete button pad
- dell_044e_1220 (Dell Precision 7740) is a discrete button pad
Equivalent hid-tools commit
8300a55bf4
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
Not all our tests really require it but since it's likely pip-installed
anyway it's trivial to require the new version, just in case we want to
start cleaning up other bits.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
Another Chicony Electronics HP 5MP Camera with USB ID 04F2:B882
reports a HID sensor interface that is not actually implemented.
Add the device to the HID ignore list so the bogus sensor is never
exposed to userspace. Then the system won't hang when runtime PM
tries to wake the unresponsive device.
Signed-off-by: Chris Chiu <chris.chiu@canonical.com>
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
intel-thc-dma.c uses sgl_alloc() resulting in a build failure
if CONFIG_SGL_ALLOC is not enabled
Signed-off-by: Tim Zimmermann <tim@linux4.de>
Reviewed-by: Even Xu <even.xu@intel.com>
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
Similar to commit 835a507535 ("selftests/bpf: Add -fms-extensions to
bpf build flags") and commit 639f58a0f4 ("bpftool: Fix build warnings
due to MS extensions")
The kernel is now built with -fms-extensions, therefore
generated vmlinux.h contains types like:
struct slab {
..
struct freelist_counters;
};
Use -fms-extensions and -Wno-microsoft-anon-tag flags
to build bpf programs that #include "vmlinux.h"
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
Similar to commit 835a507535 ("selftests/bpf: Add -fms-extensions to
bpf build flags") and commit 639f58a0f4 ("bpftool: Fix build warnings
due to MS extensions")
The kernel is now built with -fms-extensions, therefore
generated vmlinux.h contains types like:
struct slab {
..
struct freelist_counters;
};
Use -fms-extensions and -Wno-microsoft-anon-tag flags
to build bpf programs that #include "vmlinux.h"
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
Yohei Kojima says:
====================
net: netdevsim: fix inconsistent carrier state after link/unlink
This series fixes netdevsim's inconsistent behavior between carrier
and link/unlink state.
More specifically, this fixes a bug that the carrier goes DOWN although
two netdevsim were peered, depending on the order of peering and ifup.
Especially in a NetworkManager-enabled environment, netdevsim test fails
because of this.
The first patch fixes the bug itself in netdevsim/bus.c by adding
netif_carrier_on() into a proper function. The second patch adds a
regression test for this bug.
====================
Link: https://patch.msgid.link/cover.1767624906.git.yk@y-koj.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This commit adds a test case for netdevsim carrier state consistency.
Specifically, the added test verifies the carrier state during the
following operations:
1. Unlink two netdevsims
2. ifdown one netdevsim, then ifup again
3. Link the netdevsims again
4. ifdown one netdevsim, then ifup again
These steps verifies that the carrier is UP iff two netdevsims are
linked and ifuped.
Signed-off-by: Yohei Kojima <yk@y-koj.net>
Link: https://patch.msgid.link/481e2729e53b6074ebfc0ad85764d8feb244de8c.1767624906.git.yk@y-koj.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This patch fixes the edge case behavior on ifup/ifdown and
linking/unlinking two netdevsim interfaces:
1. unlink two interfaces netdevsim1 and netdevsim2
2. ifdown netdevsim1
3. ifup netdevsim1
4. link two interfaces netdevsim1 and netdevsim2
5. (Now two interfaces are linked in terms of netdevsim peer, but
carrier state of the two interfaces remains DOWN.)
This inconsistent behavior is caused by the current implementation,
which only cares about the "link, then ifup" order, not "ifup, then
link" order. This patch fixes the inconsistency by calling
netif_carrier_on() when two netdevsim interfaces are linked.
This patch fixes buggy behavior on NetworkManager-based systems which
causes the netdevsim test to fail with the following error:
# timeout set to 600
# selftests: drivers/net/netdevsim: peer.sh
# 2025/12/25 00:54:03 socat[9115] W address is opened in read-write mode but only supports read-only
# 2025/12/25 00:56:17 socat[9115] W connect(7, AF=2 192.168.1.1:1234, 16): Connection timed out
# 2025/12/25 00:56:17 socat[9115] E TCP:192.168.1.1🔢 Connection timed out
# expected 3 bytes, got 0
# 2025/12/25 00:56:17 socat[9109] W exiting on signal 15
not ok 13 selftests: drivers/net/netdevsim: peer.sh # exit=1
This patch also solves timeout on TCP Fast Open (TFO) test in
NetworkManager-based systems because it also depends on netdevsim's
carrier consistency.
Fixes: 1a8fed52f7 ("netdevsim: set the carrier when the device goes up")
Signed-off-by: Yohei Kojima <yk@y-koj.net>
Reviewed-by: Breno Leitao <leitao@debian.org>
Link: https://patch.msgid.link/602c9e1ba5bb2ee1997bb38b1d866c9c3b807ae9.1767624906.git.yk@y-koj.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The pp_alloc_fail.py test (which doesn't run in NIPA CI?) uses tool, add
back the import.
Resolves:
ImportError: cannot import name 'tool' from 'lib.py'
Fixes: 68a052239f ("selftests: drv-net: update remaining Python init files")
Reviewed-by: Nimrod Oren <noren@nvidia.com>
Signed-off-by: Gal Pressman <gal@nvidia.com>
Link: https://patch.msgid.link/20260105163319.47619-1-gal@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
We expect the SFP write accessors to return the number of written bytes.
We fail to do so for single-byte smbus accesses, which may cause errors
when setting a module's high-power state and for some cotsworks modules.
Let's return the amount of written bytes, as expected.
Fixes: 7662abf4db ("net: phy: sfp: Add support for SMBus module access")
Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20260105151840.144552-1-maxime.chevallier@bootlin.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This reverts commit 926eae6044, which
never could have produced the intended effect:
https://lore.kernel.org/netdev/AM0PR06MB10396BBF8B568D77556FC46F8F7DEA@AM0PR06MB10396.eurprd06.prod.outlook.com/
The reason why it is broken beyond repair in this form is that the
mv88e6xxx driver outsources its "tx-p2p-microvolt" property to the OF
node of an external Ethernet PHY. This:
(a) does not work if there is no external PHY (chip-to-chip connection,
or SFP module)
(b) pollutes the OF property namespace / bindings of said external PHY
("tx-p2p-microvolt" could have meaning for the Ethernet PHY's SerDes
interface as well)
We can revisit the idea of making SerDes amplitude configurable once we
have proper bindings for the mv88e6xxx SerDes. Until then, remove the
code that leaves us with unnecessary baggage.
Fixes: 926eae6044 ("dsa: mv88e6xxx: make serdes SGMII/Fiber tx amplitude configurable")
Cc: Holger Brunck <holger.brunck@hitachienergy.com>
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20260104093952.486606-1-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add Raju Rangoju as an additional maintainer to support the AMD XGBE
network device driver.
Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Acked-by: Raju Rangoju <Raju.Rangoju@amd.com>
Link: https://patch.msgid.link/20251211112831.1781030-1-Shyam-sundar.S-k@amd.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
If vport flags do not contain VIRTCHNL2_VPORT_ENABLE_RDMA, driver does not
allocate vdev_info for this vport. This leads to kernel NULL pointer
dereference in idpf_idc_vport_dev_down(), which references vdev_info for
every vport regardless.
Check, if vdev_info was ever allocated before unplugging aux device.
Fixes: be91128c57 ("idpf: implement RDMA vport auxiliary dev create, init, and destroy")
Reviewed-by: Madhu Chittim <madhu.chittim@intel.com>
Signed-off-by: Larysa Zaremba <larysa.zaremba@intel.com>
Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de>
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Tested-by: Krishneil Singh <krishneil.k.singh@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
The HW only supports a maximum Rx buffer size of 16K-128. On systems
using large pages, the libeth logic can configure the buffer size to be
larger than this. The upper bound is PAGE_SIZE while the lower bound is
MTU rounded up to the nearest power of 2. For example, ARM systems with
a 64K page size and an mtu of 9000 will set the Rx buffer size to 16K,
which will cause the config Rx queues message to fail.
Initialize the bufq/fill queue buf_len field to the maximum supported
size. This will trigger the libeth logic to cap the maximum Rx buffer
size by reducing the upper bound.
Fixes: 74d1412ac8 ("idpf: use libeth Rx buffer management for payload buffer")
Signed-off-by: Joshua Hay <joshua.a.hay@intel.com>
Acked-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Reviewed-by: Madhu Chittim <madhu.chittim@intel.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Reviewed-by: David Decotigny <ddecotig@google.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Fix error handling to properly cleanup interrupts when
idpf_vport_queue_ids_init() or idpf_rx_bufs_init_all() fail. Jump to
'intr_deinit' instead of 'queues_rel' to ensure interrupts are cleaned up
before releasing other resources.
Fixes: d4d5587182 ("idpf: initialize interrupts and enable vport")
Signed-off-by: Sreedevi Joshi <sreedevi.joshi@intel.com>
Reviewed-by: Madhu Chittim <madhu.chittim@intel.com>
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Samuel Salin <Samuel.salin@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
During soft reset, the RSS LUT is freed and not restored unless the
interface is up. If an ethtool command that accesses the rss lut is
attempted immediately after reset, it will result in NULL ptr
dereference. Also, there is no need to reset the rss lut if the soft reset
does not involve queue count change.
After soft reset, set the RSS LUT to default values based on the updated
queue count only if the reset was a result of a queue count change and
the LUT was not configured by the user. In all other cases, don't touch
the LUT.
Steps to reproduce:
** Bring the interface down (if up)
ifconfig eth1 down
** update the queue count (eg., 27->20)
ethtool -L eth1 combined 20
** display the RSS LUT
ethtool -x eth1
[82375.558338] BUG: kernel NULL pointer dereference, address: 0000000000000000
[82375.558373] #PF: supervisor read access in kernel mode
[82375.558391] #PF: error_code(0x0000) - not-present page
[82375.558408] PGD 0 P4D 0
[82375.558421] Oops: Oops: 0000 [#1] SMP NOPTI
<snip>
[82375.558516] RIP: 0010:idpf_get_rxfh+0x108/0x150 [idpf]
[82375.558786] Call Trace:
[82375.558793] <TASK>
[82375.558804] rss_prepare.isra.0+0x187/0x2a0
[82375.558827] rss_prepare_data+0x3a/0x50
[82375.558845] ethnl_default_doit+0x13d/0x3e0
[82375.558863] genl_family_rcv_msg_doit+0x11f/0x180
[82375.558886] genl_rcv_msg+0x1ad/0x2b0
[82375.558902] ? __pfx_ethnl_default_doit+0x10/0x10
[82375.558920] ? __pfx_genl_rcv_msg+0x10/0x10
[82375.558937] netlink_rcv_skb+0x58/0x100
[82375.558957] genl_rcv+0x2c/0x50
[82375.558971] netlink_unicast+0x289/0x3e0
[82375.558988] netlink_sendmsg+0x215/0x440
[82375.559005] __sys_sendto+0x234/0x240
[82375.559555] __x64_sys_sendto+0x28/0x30
[82375.560068] x64_sys_call+0x1909/0x1da0
[82375.560576] do_syscall_64+0x7a/0xfa0
[82375.561076] ? clear_bhb_loop+0x60/0xb0
[82375.561567] entry_SYSCALL_64_after_hwframe+0x76/0x7e
<snip>
Fixes: 02cbfba1ad ("idpf: add ethtool callbacks")
Signed-off-by: Sreedevi Joshi <sreedevi.joshi@intel.com>
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Reviewed-by: Sridhar Samudrala <sridhar.samudrala@intel.com>
Reviewed-by: Emil Tantilov <emil.s.tantilov@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Samuel Salin <Samuel.salin@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
