Scanning online CPUs to calculate the occupancy might be
time-consuming. Only allow 1 thread of the process to scan
the CPUs at the same time, which is similar to what
NUMA balance does in task_numa_work().
Signed-off-by: Jianyong Wu <wujianyong@hygon.cn>
Signed-off-by: Chen Yu <yu.c.chen@intel.com>
Signed-off-by: Tim Chen <tim.c.chen@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://patch.msgid.link/5672b52e588b855b01e5a1a17822f7c6c7237a3d.1778703694.git.tim.c.chen@linux.intel.com
Provide a debugfs directory llc_balancing, and a knob named
"enabled" under it to allow the user to turn off and on the
cache aware scheduling at runtime.
Suggested-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Chen Yu <yu.c.chen@intel.com>
Signed-off-by: Tim Chen <tim.c.chen@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://patch.msgid.link/0aa56f7fc48db2f8f700cd1aa34dedd0ec88351b.1775065312.git.tim.c.chen@linux.intel.com
Introduce sched_cache_present to enable cache aware scheduling for
multi LLCs NUMA node Cache-aware load balancing should only be
enabled if there are more than 1 LLCs within 1 NUMA node.
sched_cache_present is introduced to indicate whether this
platform supports this topology.
Test results:
The first test platform is a 2 socket Intel Sapphire Rapids with 30
cores per socket. The DRAM interleaving is enabled in the BIOS so it
essential has one NUMA node with two last level caches. There are 60
CPUs associated with each last level cache.
The second test platform is a AMD Genoa. There are 4 Nodes and 32 CPUs
per node. Each node has 2 CCXs and each CCX has 16 CPUs.
hackbench/schbench/netperf/stream/stress-ng/chacha20 were launched
on these two platforms.
[TL;DR]
Sappire Rapids:
hackbench shows significant improvement when the number of
different active threads is below the capacity of a LLC.
schbench shows limitted wakeup latency improvement.
ChaCha20-xiangshan(risc-v simulator) shows good throughput
improvement. No obvious difference was observed in
netperf/stream/stress-ng in Hmean.
Genoa:
Significant improvement is observed in hackbench when
the active number of threads is lower than the number
of CPUs within 1 LLC. On v2, Aaron reported improvement
of hackbench/redis when system is underloaded.
ChaCha20-xiangshan shows huge throughput improvement.
Phoronix has tested v1 and shows good improvements in 30+
cases[3]. No obvious difference was observed in
netperf/stream/stress-ng in Hmean.
Detail:
Due to length constraints, data without much difference with
baseline is not presented.
Sapphire Rapids:
[hackbench pipe]
================
case load baseline(std%) compare%( std%)
threads-pipe-10 1-groups 1.00 ( 1.22) +26.09 ( 1.10)
threads-pipe-10 2-groups 1.00 ( 4.90) +22.88 ( 0.18)
threads-pipe-10 4-groups 1.00 ( 2.07) +9.00 ( 3.49)
threads-pipe-10 8-groups 1.00 ( 8.13) +3.45 ( 3.62)
threads-pipe-16 1-groups 1.00 ( 2.11) +26.30 ( 0.08)
threads-pipe-16 2-groups 1.00 ( 15.13) -1.77 ( 11.89)
threads-pipe-16 4-groups 1.00 ( 4.37) +0.58 ( 7.99)
threads-pipe-16 8-groups 1.00 ( 2.88) +2.71 ( 3.50)
threads-pipe-2 1-groups 1.00 ( 9.40) +22.07 ( 0.71)
threads-pipe-2 2-groups 1.00 ( 9.99) +18.01 ( 0.95)
threads-pipe-2 4-groups 1.00 ( 3.98) +24.66 ( 0.96)
threads-pipe-2 8-groups 1.00 ( 7.00) +21.83 ( 0.23)
threads-pipe-20 1-groups 1.00 ( 1.03) +28.84 ( 0.21)
threads-pipe-20 2-groups 1.00 ( 4.42) +31.90 ( 3.15)
threads-pipe-20 4-groups 1.00 ( 9.97) +4.56 ( 1.69)
threads-pipe-20 8-groups 1.00 ( 1.87) +1.25 ( 0.74)
threads-pipe-4 1-groups 1.00 ( 4.48) +25.67 ( 0.78)
threads-pipe-4 2-groups 1.00 ( 9.14) +4.91 ( 2.08)
threads-pipe-4 4-groups 1.00 ( 7.68) +19.36 ( 1.53)
threads-pipe-4 8-groups 1.00 ( 10.79) +7.20 ( 12.20)
threads-pipe-8 1-groups 1.00 ( 4.69) +21.93 ( 0.03)
threads-pipe-8 2-groups 1.00 ( 1.16) +25.29 ( 0.65)
threads-pipe-8 4-groups 1.00 ( 2.23) -1.27 ( 3.62)
threads-pipe-8 8-groups 1.00 ( 4.65) -3.08 ( 2.75)
Note: The default number of fd in hackbench is changed from 20 to various
values to ensure that threads fit within a single LLC, especially on AMD
systems. Take "threads-pipe-8, 2-groups" for example, the number of fd
is 8, and 2 groups are created.
[schbench]
The 99th percentile wakeup latency shows some improvements when the
system is underload, while it does not bring much difference with
the increasing of system utilization.
99th Wakeup Latencies Base (mean std) Compare (mean std) Change
=========================================================================
thread=2 9.00(0.00) 9.00(1.73) 0.00%
thread=4 7.33(0.58) 6.33(0.58) +13.64%
thread=8 9.00(0.00) 7.67(1.15) +14.78%
thread=16 8.67(0.58) 8.67(1.53) 0.00%
thread=32 9.00(0.00) 7.00(0.00) +22.22%
thread=64 9.33(0.58) 9.67(0.58) -3.64%
thread=128 12.00(0.00) 12.00(0.00) 0.00%
[chacha20 on simulated risc-v]
baseline:
Host time spent: 67861ms
cache aware scheduling enabled:
Host time spent: 54441ms
Time reduced by 24%
Genoa:
[hackbench pipe]
The default number of fd is 20, which exceed the number of CPUs
in a LLC. So the fd is adjusted to 2, 4, 6, 8, 20 respectively.
Exclude the result with large run-to-run variance, 10% ~ 50%
improvement is observed when the system is underloaded:
[hackbench pipe]
================
case load baseline(std%) compare%( std%)
threads-pipe-2 1-groups 1.00 ( 2.89) +47.33 ( 1.20)
threads-pipe-2 2-groups 1.00 ( 3.88) +39.82 ( 0.61)
threads-pipe-2 4-groups 1.00 ( 8.76) +5.57 ( 13.10)
threads-pipe-20 1-groups 1.00 ( 4.61) +11.72 ( 1.06)
threads-pipe-20 2-groups 1.00 ( 6.18) +14.55 ( 1.47)
threads-pipe-20 4-groups 1.00 ( 2.99) +10.16 ( 4.49)
threads-pipe-4 1-groups 1.00 ( 4.23) +43.70 ( 2.14)
threads-pipe-4 2-groups 1.00 ( 3.68) +8.45 ( 4.04)
threads-pipe-4 4-groups 1.00 ( 17.72) +2.42 ( 1.14)
threads-pipe-6 1-groups 1.00 ( 3.10) +7.74 ( 3.83)
threads-pipe-6 2-groups 1.00 ( 3.42) +14.26 ( 4.53)
threads-pipe-6 4-groups 1.00 ( 10.34) +10.94 ( 7.12)
threads-pipe-8 1-groups 1.00 ( 4.21) +9.06 ( 4.43)
threads-pipe-8 2-groups 1.00 ( 1.88) +3.74 ( 0.58)
threads-pipe-8 4-groups 1.00 ( 2.78) +23.96 ( 1.18)
[chacha20 on simulated risc-v]
Host time spent: 54762ms
Host time spent: 28295ms
Time reduced by 48%
Suggested-by: Libo Chen <libchen@purestorage.com>
Suggested-by: Adam Li <adamli@os.amperecomputing.com>
Signed-off-by: Chen Yu <yu.c.chen@intel.com>
Co-developed-by: Tim Chen <tim.c.chen@linux.intel.com>
Signed-off-by: Tim Chen <tim.c.chen@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://patch.msgid.link/71972e12ab4f08aff422b31e34df09bdbd94de84.1775065312.git.tim.c.chen@linux.intel.com
During load balancing, make can_migrate_task()
consider a task's LLC preference.
Prevent a task from being moved out of its preferred LLC.
During the regular load balancing, if
the task cannot be migrated due to LLC locality, the
nr_balance_failed also should not be increased.
Suggested-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Suggested-by: K Prateek Nayak <kprateek.nayak@amd.com>
Co-developed-by: Chen Yu <yu.c.chen@intel.com>
Signed-off-by: Chen Yu <yu.c.chen@intel.com>
Signed-off-by: Tim Chen <tim.c.chen@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://patch.msgid.link/53da65f3d59de31e1a1dc59a4093d8dd9d4dc206.1775065312.git.tim.c.chen@linux.intel.com
Cache aware scheduling mainly does two things:
1. Prevent task from migrating out of its preferred LLC if not
nessasary.
2. Migrating task to their preferred LLC if nessasary.
For 1:
In the generic load balance, if the busiest runqueue has only one task,
active balancing may be invoked to move it away. However, this migration
might break LLC locality.
Prevent regular load balance from migrating a task that
prefers the current LLC. The load level and imbalance do not warrant
breaking LLC preference per the can_migrate_llc() policy. Here, the
benefit of LLC locality outweighs the power efficiency gained from
migrating the only runnable task away.
Before migration, check whether the task is running on its preferred
LLC: Do not move a lone task to another LLC if it would move the task
away from its preferred LLC or cause excessive imbalance between LLCs.
For 2:
On the other hand, if the migration type is migrate_llc_task, it means
that there are tasks on the env->src_cpu that want to be migrated to
their preferred LLC, launch the active load balance anyway.
Co-developed-by: Chen Yu <yu.c.chen@intel.com>
Signed-off-by: Chen Yu <yu.c.chen@intel.com>
Signed-off-by: Tim Chen <tim.c.chen@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://patch.msgid.link/9b816d8c27fabf2a9c0e1f61a6b90afe8ec4ad52.1775065312.git.tim.c.chen@linux.intel.com
Introduce a new migration type, migrate_llc_task, to support
cache-aware load balancing.
After identifying the busiest sched_group (having the most tasks
preferring the destination LLC), mark migrations with this type.
During load balancing, each runqueue in the busiest sched_group is
examined, and the runqueue with the highest number of tasks preferring
the destination CPU is selected as the busiest runqueue.
Co-developed-by: Chen Yu <yu.c.chen@intel.com>
Signed-off-by: Chen Yu <yu.c.chen@intel.com>
Signed-off-by: Tim Chen <tim.c.chen@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://patch.msgid.link/b9df27c19cc5121ddb2a7d1be7f9d52fec1563dc.1775065312.git.tim.c.chen@linux.intel.com
During LLC load balancing, first check for tasks that prefer the
destination LLC and balance them to it before others.
Mark source sched groups containing tasks preferring non local LLCs
with the group_llc_balance flag. This ensures the load balancer later
pulls or pushes these tasks toward their preferred LLCs.
The priority of group_llc_balance is lower than that of group_overloaded
and higher than that of all other group types. This is because
group_llc_balance may exacerbate load imbalance, and if the LLC balancing
attempt fails, the nr_balance_failed mechanism will trigger other group
types to rebalance the load.
The load balancer selects the busiest sched_group and migrates tasks
to less busy groups to distribute load across CPUs.
With cache-aware scheduling enabled, the busiest sched_group is
the one with most tasks preferring the destination LLC. If
the group has the llc_balance flag set, cache aware load balancing is
triggered.
Introduce the helper function update_llc_busiest() to identify the
sched_group with the most tasks preferring the destination LLC.
Suggested-by: K Prateek Nayak <kprateek.nayak@amd.com>
Suggested-by: Madadi Vineeth Reddy <vineethr@linux.ibm.com>
Co-developed-by: Chen Yu <yu.c.chen@intel.com>
Signed-off-by: Chen Yu <yu.c.chen@intel.com>
Signed-off-by: Tim Chen <tim.c.chen@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://patch.msgid.link/baa458f45eab3f602af090c6d6af63dc864f5ec6.1775065312.git.tim.c.chen@linux.intel.com
There is no need to check the local group twice for both
group_asym_packing and group_smt_balance. Adjust the code
to facilitate future checks for group types (cache-aware
load balancing) as well.
No functional changes are expected.
Suggested-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Co-developed-by: Chen Yu <yu.c.chen@intel.com>
Signed-off-by: Chen Yu <yu.c.chen@intel.com>
Signed-off-by: Tim Chen <tim.c.chen@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://patch.msgid.link/99a57865c8ae1847087a5c00e92d24351cf3e5a8.1775065312.git.tim.c.chen@linux.intel.com
During LLC load balancing, tabulate the number of tasks on each runqueue
that prefer the LLC contains the env->dst_cpu in a sched group.
For example, consider a system with 4 LLC sched groups (LLC0 to LLC3)
balancing towards LLC3. LLC0 has 3 tasks preferring LLC3, LLC1 has
2, and LLC2 has 1. LLC0, having the most tasks preferring LLC3, is
selected as the busiest source to pick tasks from.
Within a source LLC, the total number of tasks preferring a destination
LLC is computed by summing counts across all CPUs in that LLC. For
instance, if LLC0 has CPU0 with 2 tasks and CPU1 with 1 task preferring
LLC3, the total for LLC0 is 3.
These statistics allow the load balancer to choose tasks from source
sched groups that best match their preferred LLCs.
Co-developed-by: Chen Yu <yu.c.chen@intel.com>
Signed-off-by: Chen Yu <yu.c.chen@intel.com>
Signed-off-by: Tim Chen <tim.c.chen@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://patch.msgid.link/3d8502a33a753c4384b368f97f64ee70b1cea0db.1775065312.git.tim.c.chen@linux.intel.com
Calculate the number of tasks' LLC preferences for each runqueue.
This statistic is computed during task enqueue and dequeue
operations, and is used by the cache-aware load balancing.
Co-developed-by: Chen Yu <yu.c.chen@intel.com>
Signed-off-by: Chen Yu <yu.c.chen@intel.com>
Signed-off-by: Tim Chen <tim.c.chen@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://patch.msgid.link/d15a64436d3acd19c5c53344c5e9d3d0b79b3233.1775065312.git.tim.c.chen@linux.intel.com
The lowest level of sched domain for each CPU is assigned an
array where each element tracks the number of tasks preferring
a given LLC, indexed from 0 to max_lid. Since each CPU
has its dedicated sd, this implies that each CPU will have
a dedicated task LLC preference counter.
For example, sd->llc_counts[3] = 2 signifies that there
are 2 tasks on this runqueue which prefer to run within LLC3.
The load balancer can use this information to identify busy
runqueues and migrate tasks to their preferred LLC domains.
This array will be reallocated at runtime during sched domain
rebuild.
Introduce the buffer allocation mechanism, and the statistics
will be calculated in the subsequent patch.
Note: the LLC preference statistics of each CPU are reset on
sched domain rebuild and may under count temporarily, until the
CPU becomes idle and the count is cleared. This is a trade off
to avoid complex data synchronization across sched domain builds.
Suggested-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Suggested-by: K Prateek Nayak <kprateek.nayak@amd.com>
Co-developed-by: Chen Yu <yu.c.chen@intel.com>
Signed-off-by: Chen Yu <yu.c.chen@intel.com>
Signed-off-by: Tim Chen <tim.c.chen@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://patch.msgid.link/42e79eceb8cd6be8a032401d481d101913bc5703.1775065312.git.tim.c.chen@linux.intel.com
For each runqueue, track the number of tasks with an LLC preference
and how many of them are running on their preferred LLC. This mirrors
nr_numa_running and nr_preferred_running for NUMA balancing, and will
be used by cache-aware load balancing in later patches.
Co-developed-by: Chen Yu <yu.c.chen@intel.com>
Signed-off-by: Chen Yu <yu.c.chen@intel.com>
Signed-off-by: Tim Chen <tim.c.chen@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://patch.msgid.link/459a37102f3d74a4e09ea58401d2094ac731d044.1775065312.git.tim.c.chen@linux.intel.com
With cache-aware scheduling enabled, each task is assigned a
preferred LLC ID. This allows quick identification of the LLC domain
where the task prefers to run, similar to numa_preferred_nid in
NUMA balancing.
Co-developed-by: Chen Yu <yu.c.chen@intel.com>
Signed-off-by: Chen Yu <yu.c.chen@intel.com>
Signed-off-by: Tim Chen <tim.c.chen@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://patch.msgid.link/f2ceecba5858680349ad4ce9303a2121f0bb7272.1775065312.git.tim.c.chen@linux.intel.com
Introduce an index mapping between CPUs and their LLCs. This provides
a roughly continuous per LLC index needed for cache-aware load balancing in
later patches.
The existing per_cpu llc_id usually points to the first CPU of the
LLC domain, which is sparse and unsuitable as an array index. Using
llc_id directly would waste memory.
With the new mapping, CPUs in the same LLC share an approximate
continuous id:
per_cpu(llc_id, CPU=0...15) = 0
per_cpu(llc_id, CPU=16...31) = 1
per_cpu(llc_id, CPU=32...47) = 2
...
Note that the LLC IDs are allocated via bitmask, so the IDs may be
reused during CPU offline->online transitions.
Suggested-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Originally-by: K Prateek Nayak <kprateek.nayak@amd.com>
Co-developed-by: Chen Yu <yu.c.chen@intel.com>
Signed-off-by: Chen Yu <yu.c.chen@intel.com>
Signed-off-by: Tim Chen <tim.c.chen@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://patch.msgid.link/047ef46339e4db497b54a89940a7ebedf27fcf28.1775065312.git.tim.c.chen@linux.intel.com
Cache-aware scheduling aggregates threads onto their preferred LLC,
mainly through load balancing. When the preferred LLC becomes
saturated, more threads are still placed there, increasing latency.
A mechanism is needed to limit aggregation so that the preferred LLC
does not become overloaded.
Introduce helper functions can_migrate_llc() and
can_migrate_llc_task() to enforce the LLC migration policy:
1. Aggregate a task to its preferred LLC if both source and
destination LLCs are not too busy, or if doing so will not
leave the preferred LLC much more imbalanced than the
non-preferred one (>20% utilization difference, a little
higher than the default imbalance_pct(17%) of the LLC domain
as hysteresis). Later this threshold will be turned into tunable
debugfs.
2. Allow moving a task from overloaded preferred LLC to a non
preferred LLC if this will not cause the non preferred LLC
to become too imbalanced to cause a later migration back.
3. If both LLCs are too busy, let the generic load balance to
spread the tasks.
Further (hysteresis)action could be taken in the future to prevent tasks
from being migrated into and out of the preferred LLC frequently (back and
forth): the threshold for migrating a task out of its preferred LLC should
be higher than that for migrating it into the LLC.
Signed-off-by: Chen Yu <yu.c.chen@intel.com>
Co-developed-by: Tim Chen <tim.c.chen@linux.intel.com>
Signed-off-by: Tim Chen <tim.c.chen@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://patch.msgid.link/d19b52589cdceaee5e625980959f4d1982d6d7c9.1775065312.git.tim.c.chen@linux.intel.com
When a system becomes busy and a process's preferred LLC is
saturated with too many threads, tasks within that LLC migrate
frequently. These in LLC migrations introduce latency and degrade
performance. To avoid this, task aggregation should be suppressed
when the preferred LLC is overloaded, which requires a metric to
indicate LLC utilization.
Record per LLC utilization/cpu capacity during periodic load
balancing. These statistics will be used in later patches to decide
whether tasks should be aggregated into their preferred LLC.
Signed-off-by: Chen Yu <yu.c.chen@intel.com>
Co-developed-by: Tim Chen <tim.c.chen@linux.intel.com>
Signed-off-by: Tim Chen <tim.c.chen@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://patch.msgid.link/a48151b3d57f2a42a5971aaead1b7f81e69229f4.1775065312.git.tim.c.chen@linux.intel.com
When NUMA balancing is enabled, the kernel currently iterates over all
online CPUs to aggregate process-wide occupancy data. On large systems,
this global scan introduces significant overhead.
To reduce scan latency, limit the search to a subset of relevant CPUs:
1. The task's preferred NUMA node.
2. The node where the task is currently running.
3. The node that contains the task's current preferred LLC..
While focusing solely on the preferred NUMA node is ideal, a
process-wide scan must remain flexible because the "preferred node"
is a per-task attribute. Different threads within the same process may
have different preferred nodes, causing the process-wide preference to
migrate. Maintaining a mask that covers both the preferred and active
running nodes ensures accuracy while significantly reducing the number of
CPUs inspected.
Future work may integrate numa_group to further refine task aggregation.
Suggested-by: Madadi Vineeth Reddy <vineethr@linux.ibm.com>
Signed-off-by: Chen Yu <yu.c.chen@intel.com>
Co-developed-by: Tim Chen <tim.c.chen@linux.intel.com>
Signed-off-by: Tim Chen <tim.c.chen@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://patch.msgid.link/57ed5fcec9b242803fe4ea2ce6e7f3de6a6efc6b.1775065312.git.tim.c.chen@linux.intel.com
Adds infrastructure to enable cache-aware load balancing,
which improves cache locality by grouping tasks that share resources
within the same cache domain. This reduces cache misses and improves
overall data access efficiency.
In this initial implementation, threads belonging to the same process
are treated as entities that likely share working sets. The mechanism
tracks per-process CPU occupancy across cache domains and attempts to
migrate threads toward cache-hot domains where their process already
has active threads, thereby enhancing locality.
This provides a basic model for cache affinity. While the current code
targets the last-level cache (LLC), the approach could be extended to
other domain types such as clusters (L2) or node-internal groupings.
At present, the mechanism selects the CPU within an LLC that has the
highest recent runtime. Subsequent patches in this series will use this
information in the load-balancing path to guide task placement toward
preferred LLCs.
In the future, more advanced policies could be integrated through NUMA
balancing-for example, migrating a task to its preferred LLC when spare
capacity exists, or swapping tasks across LLCs to improve cache affinity.
Grouping of tasks could also be generalized from that of a process
to be that of a NUMA group, or be user configurable.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Chen Yu <yu.c.chen@intel.com>
Signed-off-by: Tim Chen <tim.c.chen@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://patch.msgid.link/6269a53221b9439b9ca00d18a9d1946fb64d8cff.1775065312.git.tim.c.chen@linux.intel.com
Add a (debug) option to virtually split the LLC, no CAT involved, just fake
topology. Used to test code that depends (either in behaviour or directly) on
there being multiple LLC domains in a node.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
The sched_rt_global_constraints() function is a remnant that used to set
up global RT throttling but that is no more since commit 5f6bd380c7
("sched/rt: Remove default bandwidth control") and the function ended up
only doing schedulability check.
Move the check into the validation function where it fits better.
(The order of validations sched_dl_global_validate() and
sched_rt_global_validate() shouldn't matter.)
Signed-off-by: Michal Koutný <mkoutny@suse.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://patch.msgid.link/20260323-sched-rert_groups-v3-2-1e7d5ed6b249@suse.com
The warning from the commit 87f1fb77d8 ("sched: Add RT_GROUP WARN
checks for non-root task_groups") is wrong -- it assumes that only
task_groups with rt_rq are traversed, however, the schedulability check
would iterate all task_groups even when rt_group_sched=0 is disabled at
boot time but some non-root task_groups exist.
The schedulability check is supposed to validate:
a) that children don't overcommit its parent,
b) no RT task group overcommits global RT limit.
but with rt_group_sched=0 there is no (non-trivial) hierarchy of RT groups,
therefore skip the validation altogether. Otherwise, writes to the
global sched_rt_runtime_us knob will be rejected with incorrect
validation error.
This fix is immaterial with CONFIG_RT_GROUP_SCHED=n.
Fixes: 87f1fb77d8 ("sched: Add RT_GROUP WARN checks for non-root task_groups")
Signed-off-by: Michal Koutný <mkoutny@suse.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://patch.msgid.link/20260323-sched-rert_groups-v3-1-1e7d5ed6b249@suse.com
Here is one scenario which was triggered when running:
stress-ng --yield=32 -t 10000000s&
while true; do perf bench sched messaging -p -t -l 100000 -g 16; done
on a 256CPUs machine after about an hour into the run:
__enqeue_entity: entity_key(-141245081754) weight(90891264) overflow_mul(5608800059305154560) vlag(57498) delayed?(0)
cfs_rq: zero_vruntime(3809707759657809) sum_w_vruntime(0) sum_weight(0) nr_queued(1)
cfs_rq->curr: entity_key(0) vruntime(3809707759657809) deadline(3809723966988476) weight(37)
The above comes from __enqueue_entity() after a place_entity(). Breaking
this down:
vlag_initial = 57498
vlag = (57498 * (37 + 90891264)) / 37 = 141,245,081,754
vruntime = 3809707759657809 - 141245081754 = 3,809,566,514,576,055
entity_key(se, cfs_rq) = -141,245,081,754
Now, multiplying the entity_key with its own weight results to
5,608,800,059,305,154,560 (same as what overflow_mul() suggests) but
in Python, without overflow, this would be: -1,2837,944,014,404,397,056
Avoid the overflow (without doing the division for avg_vruntime()), by moving
zero_vruntime to the new entity when it is heavier.
Fixes: 4823725d9d ("sched/fair: Increase weight bits for avg_vruntime")
Signed-off-by: K Prateek Nayak <kprateek.nayak@amd.com>
[peterz: suggested 'weight > load' condition]
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://patch.msgid.link/20260407120052.GG3738010@noisy.programming.kicks-ass.net
to_ratio() computes BW_SHIFT-scaled bandwidth ratios from u64 period and
runtime values, but it returns unsigned long. tg_rt_schedulable() also
stores the current group limit and the accumulated child sum in unsigned
long.
On 32-bit builds, large bandwidth ratios can be truncated and the RT
group sum can wrap when enough siblings are present. That can let an
overcommitted RT hierarchy pass the schedulability check, and it also
narrows the helper result for other callers.
Return u64 from to_ratio() and use u64 for the RT group totals so
bandwidth ratios are preserved and compared at full width on both 32-bit
and 64-bit builds.
Fixes: b40b2e8eb5 ("sched: rt: multi level group constraints")
Assisted-by: Codex:GPT-5
Signed-off-by: Joseph Salisbury <joseph.salisbury@oracle.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/20260403210014.2713404-1-joseph.salisbury@oracle.com
Delayed dequeue feature aims to reduce the negative lag of a dequeued
task while sleeping but it can happens that newly enqueued tasks will
move backward the avg vruntime and increase its negative lag.
When the delayed dequeued task wakes up, it has more neg lag compared
to being dequeued immediately or to other tasks that have been
dequeued just before theses new enqueues.
Ensure that the negative lag of a delayed dequeued task doesn't
increase during its delayed dequeued phase while waiting for its neg
lag to diseappear. Similarly, we remove any positive lag that the
delayed dequeued task could have gain during thsi period.
Short slice tasks are particularly impacted in overloaded system.
Test on snapdragon rb5:
hackbench -T -p -l 16000000 -g 2 1> /dev/null &
cyclictest -t 1 -i 2777 -D 333 --policy=fair --mlock -h 20000 -q
The scheduling latency of cyclictest is:
tip/sched/core tip/sched/core +this patch
cyclictest slice (ms) (default)2.8 8 8
hackbench slice (ms) (default)2.8 20 20
Total Samples | 115632 119733 119806
Average (us) | 364 64(-82%) 61(- 5%)
Median (P50) (us) | 60 56(- 7%) 56( 0%)
90th Percentile (us) | 1166 62(-95%) 62( 0%)
99th Percentile (us) | 4192 73(-98%) 72(- 1%)
99.9th Percentile (us) | 8528 2707(-68%) 1300(-52%)
Maximum (us) | 17735 14273(-20%) 13525(- 5%)
Signed-off-by: Vincent Guittot <vincent.guittot@linaro.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://patch.msgid.link/20260331162352.551501-1-vincent.guittot@linaro.org
Use helper sched_energy_enabled() everywhere we want to test if EAS is
enabled instead of mixing sched_energy_enabled() and direct call to
static_branch_unlikely().
No functional change
Signed-off-by: Vincent Guittot <vincent.guittot@linaro.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://patch.msgid.link/20260327132013.2800517-1-vincent.guittot@linaro.org
Add logic to handle migrating a blocked waiter to a remote
cpu where the lock owner is runnable.
Additionally, as the blocked task may not be able to run
on the remote cpu, add logic to handle return migration once
the waiting task is given the mutex.
Because tasks may get migrated to where they cannot run, also
modify the scheduling classes to avoid sched class migrations on
mutex blocked tasks, leaving find_proxy_task() and related logic
to do the migrations and return migrations.
This was split out from the larger proxy patch, and
significantly reworked.
Credits for the original patch go to:
Peter Zijlstra (Intel) <peterz@infradead.org>
Juri Lelli <juri.lelli@redhat.com>
Valentin Schneider <valentin.schneider@arm.com>
Connor O'Brien <connoro@google.com>
Signed-off-by: John Stultz <jstultz@google.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://patch.msgid.link/20260324191337.1841376-11-jstultz@google.com
The fair scheduler locally introduced attach_one_task() and
attach_task() helpers, but these could be generically useful so
move this code to sched.h so we can use them elsewhere.
One minor tweak made to utilize guard(rq_lock)(rq) to simplifiy
the function.
Suggested-by: K Prateek Nayak <kprateek.nayak@amd.com>
Signed-off-by: John Stultz <jstultz@google.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: K Prateek Nayak <kprateek.nayak@amd.com>
Link: https://patch.msgid.link/20260324191337.1841376-10-jstultz@google.com
With proxy-exec, a task is selected to run via pick_next_task(),
and then if it is a mutex blocked task, we call find_proxy_task()
to find a runnable owner. If the runnable owner is on another
cpu, we will need to migrate the selected donor task away, after
which we will pick_again can call pick_next_task() to choose
something else.
However, in the first call to pick_next_task(), we may have
had a balance_callback setup by the class scheduler. After we
pick again, its possible pick_next_task_fair() will be called
which calls sched_balance_newidle() and sched_balance_rq().
This will throw a warning:
[ 8.796467] rq->balance_callback && rq->balance_callback != &balance_push_callback
[ 8.796467] WARNING: CPU: 32 PID: 458 at kernel/sched/sched.h:1750 sched_balance_rq+0xe92/0x1250
...
[ 8.796467] Call Trace:
[ 8.796467] <TASK>
[ 8.796467] ? __warn.cold+0xb2/0x14e
[ 8.796467] ? sched_balance_rq+0xe92/0x1250
[ 8.796467] ? report_bug+0x107/0x1a0
[ 8.796467] ? handle_bug+0x54/0x90
[ 8.796467] ? exc_invalid_op+0x17/0x70
[ 8.796467] ? asm_exc_invalid_op+0x1a/0x20
[ 8.796467] ? sched_balance_rq+0xe92/0x1250
[ 8.796467] sched_balance_newidle+0x295/0x820
[ 8.796467] pick_next_task_fair+0x51/0x3f0
[ 8.796467] __schedule+0x23a/0x14b0
[ 8.796467] ? lock_release+0x16d/0x2e0
[ 8.796467] schedule+0x3d/0x150
[ 8.796467] worker_thread+0xb5/0x350
[ 8.796467] ? __pfx_worker_thread+0x10/0x10
[ 8.796467] kthread+0xee/0x120
[ 8.796467] ? __pfx_kthread+0x10/0x10
[ 8.796467] ret_from_fork+0x31/0x50
[ 8.796467] ? __pfx_kthread+0x10/0x10
[ 8.796467] ret_from_fork_asm+0x1a/0x30
[ 8.796467] </TASK>
This is because if a RT task was originally picked, it will
setup the rq->balance_callback with push_rt_tasks() via
set_next_task_rt().
Once the task is migrated away and we pick again, we haven't
processed any balance callbacks, so rq->balance_callback is not
in the same state as it was the first time pick_next_task was
called.
To handle this, add a zap_balance_callbacks() helper function
which cleans up the balance callbacks without running them. This
should be ok, as we are effectively undoing the state set in
the first call to pick_next_task(), and when we pick again,
the new callback can be configured for the donor task actually
selected.
Signed-off-by: John Stultz <jstultz@google.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: K Prateek Nayak <kprateek.nayak@amd.com>
Link: https://patch.msgid.link/20260324191337.1841376-9-jstultz@google.com
With proxy-exec utilizing pick-again logic, we can end up having
balance callbacks set by the preivous pick_next_task() call left
on the list.
So pull the warning out into a helper function, and make sure we
check it when we pick again.
Suggested-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: John Stultz <jstultz@google.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: K Prateek Nayak <kprateek.nayak@amd.com>
Link: https://patch.msgid.link/20260324191337.1841376-8-jstultz@google.com
As we add functionality to proxy execution, we may migrate a
donor task to a runqueue where it can't run due to cpu affinity.
Thus, we must be careful to ensure we return-migrate the task
back to a cpu in its cpumask when it becomes unblocked.
Peter helpfully provided the following example with pictures:
"Suppose we have a ww_mutex cycle:
,-+-* Mutex-1 <-.
Task-A ---' | | ,-- Task-B
`-> Mutex-2 *-+-'
Where Task-A holds Mutex-1 and tries to acquire Mutex-2, and
where Task-B holds Mutex-2 and tries to acquire Mutex-1.
Then the blocked_on->owner chain will go in circles.
Task-A -> Mutex-2
^ |
| v
Mutex-1 <- Task-B
We need two things:
- find_proxy_task() to stop iterating the circle;
- the woken task to 'unblock' and run, such that it can
back-off and re-try the transaction.
Now, the current code [without this patch] does:
__clear_task_blocked_on();
wake_q_add();
And surely clearing ->blocked_on is sufficient to break the
cycle.
Suppose it is Task-B that is made to back-off, then we have:
Task-A -> Mutex-2 -> Task-B (no further blocked_on)
and it would attempt to run Task-B. Or worse, it could directly
pick Task-B and run it, without ever getting into
find_proxy_task().
Now, here is a problem because Task-B might not be runnable on
the CPU it is currently on; and because !task_is_blocked() we
don't get into the proxy paths, so nobody is going to fix this
up.
Ideally we would have dequeued Task-B alongside of clearing
->blocked_on, but alas, [the lock ordering prevents us from
getting the task_rq_lock() and] spoils things."
Thus we need more than just a binary concept of the task being
blocked on a mutex or not.
So allow setting blocked_on to PROXY_WAKING as a special value
which specifies the task is no longer blocked, but needs to
be evaluated for return migration *before* it can be run.
This will then be used in a later patch to handle proxy
return-migration.
Signed-off-by: John Stultz <jstultz@google.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: K Prateek Nayak <kprateek.nayak@amd.com>
Link: https://patch.msgid.link/20260324191337.1841376-7-jstultz@google.com
Introduce an action enum in find_proxy_task() which allows
us to handle work needed to be done outside the mutex.wait_lock
and task.blocked_lock guard scopes.
This ensures proper locking when we clear the donor's blocked_on
pointer in proxy_deactivate(), and the switch statement will be
useful as we add more cases to handle later in this series.
Signed-off-by: John Stultz <jstultz@google.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: K Prateek Nayak <kprateek.nayak@amd.com>
Link: https://patch.msgid.link/20260324191337.1841376-6-jstultz@google.com
So far, we have been able to utilize the mutex::wait_lock
for serializing the blocked_on state, but when we move to
proxying across runqueues, we will need to add more state
and a way to serialize changes to this state in contexts
where we don't hold the mutex::wait_lock.
So introduce the task::blocked_lock, which nests under the
mutex::wait_lock in the locking order, and rework the locking
to use it.
Signed-off-by: John Stultz <jstultz@google.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: K Prateek Nayak <kprateek.nayak@amd.com>
Link: https://patch.msgid.link/20260324191337.1841376-5-jstultz@google.com
K Prateek pointed out that with Proxy Exec, we may have cases
where we context switch in __schedule(), while the donor remains
the same. This could cause balancing issues, since the
put_prev_set_next() logic short-cuts if (prev == next). With
proxy-exec prev is the previous donor, and next is the next
donor. Should the donor remain the same, but different tasks are
picked to actually run, the shortcut will have avoided enqueuing
the sched class balance callback.
So, if we are context switching, add logic to catch the
same-donor case, and trigger the put_prev/set_next calls to
ensure the balance callbacks get enqueued.
Closes: https://lore.kernel.org/lkml/20ea3670-c30a-433b-a07f-c4ff98ae2379@amd.com/
Reported-by: K Prateek Nayak <kprateek.nayak@amd.com>
Suggested-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: John Stultz <jstultz@google.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://patch.msgid.link/20260324191337.1841376-4-jstultz@google.com
Peter noted: Compilers are really bad (as in they utterly refuse)
optimizing (even when marked with __pure) the static branch
things, and will happily emit multiple identical in a row.
So pull out the one obvious sched_proxy_exec() branch in
__schedule() and remove some of the 'implicit' ones in that
path.
Suggested-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: John Stultz <jstultz@google.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: K Prateek Nayak <kprateek.nayak@amd.com>
Link: https://patch.msgid.link/20260324191337.1841376-3-jstultz@google.com
With proxy-execution, the scheduler selects the donor, but for
blocked donors, we end up running the lock owner.
This caused some complexity, because the class schedulers make
sure to remove the task they pick from their pushable task
lists, which prevents the donor from being migrated, but there
wasn't then anything to prevent rq->curr from being migrated
if rq->curr != rq->donor.
This was sort of hacked around by calling proxy_tag_curr() on
the rq->curr task if we were running something other then the
donor. proxy_tag_curr() did a dequeue/enqueue pair on the
rq->curr task, allowing the class schedulers to remove it from
their pushable list.
The dequeue/enqueue pair was wasteful, and additonally K Prateek
highlighted that we didn't properly undo things when we stopped
proxying, leaving the lock owner off the pushable list.
After some alternative approaches were considered, Peter
suggested just having the RT/DL classes just avoid migrating
when task_on_cpu().
So rework pick_next_pushable_dl_task() and the rt
pick_next_pushable_task() functions so that they skip over the
first pushable task if it is on_cpu.
Then just drop all of the proxy_tag_curr() logic.
Fixes: be39617e38 ("sched: Fix proxy/current (push,pull)ability")
Closes: https://lore.kernel.org/lkml/e735cae0-2cc9-4bae-b761-fcb082ed3e94@amd.com/
Reported-by: K Prateek Nayak <kprateek.nayak@amd.com>
Suggested-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: John Stultz <jstultz@google.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://patch.msgid.link/20260324191337.1841376-2-jstultz@google.com
The following fix in sched/urgent:
e08d007f9d ("sched/debug: Fix avg_vruntime() usage")
is in conflict with this pending commit in sched/core:
4823725d9d ("sched/fair: Increase weight bits for avg_vruntime")
Both modify the same variable definition and initialization blocks,
resolve it by merging the two.
Conflicts:
kernel/sched/debug.c
Signed-off-by: Ingo Molnar <mingo@kernel.org>
John reported that stress-ng-yield could make his machine unhappy and
managed to bisect it to commit b3d99f43c7 ("sched/fair: Fix
zero_vruntime tracking").
The commit in question changes avg_vruntime() from a function that is
a pure reader, to a function that updates variables. This turns an
unlocked sched/debug usage of this function from a minor mistake into
a data corruptor.
Fixes: af4cf40470 ("sched/fair: Add cfs_rq::avg_vruntime")
Fixes: b3d99f43c7 ("sched/fair: Fix zero_vruntime tracking")
Reported-by: John Stultz <jstultz@google.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Vincent Guittot <vincent.guittot@linaro.org>
Tested-by: K Prateek Nayak <kprateek.nayak@amd.com>
Tested-by: John Stultz <jstultz@google.com>
Link: https://patch.msgid.link/20260401132355.196370805@infradead.org
John reported that stress-ng-yield could make his machine unhappy and
managed to bisect it to commit b3d99f43c7 ("sched/fair: Fix
zero_vruntime tracking").
The combination of yield and that commit was specific enough to
hypothesize the following scenario:
Suppose we have 2 runnable tasks, both doing yield. Then one will be
eligible and one will not be, because the average position must be in
between these two entities.
Therefore, the runnable task will be eligible, and be promoted a full
slice (all the tasks do is yield after all). This causes it to jump over
the other task and now the other task is eligible and current is no
longer. So we schedule.
Since we are runnable, there is no {de,en}queue. All we have is the
__{en,de}queue_entity() from {put_prev,set_next}_task(). But per the
fingered commit, those two no longer move zero_vruntime.
All that moves zero_vruntime are tick and full {de,en}queue.
This means, that if the two tasks playing leapfrog can reach the
critical speed to reach the overflow point inside one tick's worth of
time, we're up a creek.
Additionally, when multiple cgroups are involved, there is no guarantee
the tick will in fact hit every cgroup in a timely manner. Statistically
speaking it will, but that same statistics does not rule out the
possibility of one cgroup not getting a tick for a significant amount of
time -- however unlikely.
Therefore, just like with the yield() case, force an update at the end
of every slice. This ensures the update is never more than a single
slice behind and the whole thing is within 2 lag bounds as per the
comment on entity_key().
Fixes: b3d99f43c7 ("sched/fair: Fix zero_vruntime tracking")
Reported-by: John Stultz <jstultz@google.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Vincent Guittot <vincent.guittot@linaro.org>
Tested-by: K Prateek Nayak <kprateek.nayak@amd.com>
Tested-by: John Stultz <jstultz@google.com>
Link: https://patch.msgid.link/20260401132355.081530332@infradead.org
Please consider pulling these changes from the signed vfs-7.0-rc6.fixes tag.
Thanks!
Christian
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRAhzRXHqcMeLMyaSiRxhvAZXjcogUCacmRjQAKCRCRxhvAZXjc
olJnAQD2iiLqih8Y8nX3ESMkkIQWUoSikrfSVw/GqmuKTmlrDgEA/z+LRgDGnI/+
6xzkEw4UNmJ9JoJsiPSlHq18yyga/ww=
=DxTb
-----END PGP SIGNATURE-----
Merge tag 'vfs-7.0-rc6.fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull vfs fixes from Christian Brauner:
- Fix netfs_limit_iter() hitting BUG() when an ITER_KVEC iterator
reaches it via core dump writes to 9P filesystems. Add ITER_KVEC
handling following the same pattern as the existing ITER_BVEC code.
- Fix a NULL pointer dereference in the netfs unbuffered write retry
path when the filesystem (e.g., 9P) doesn't set the prepare_write
operation.
- Clear I_DIRTY_TIME in sync_lazytime for filesystems implementing
->sync_lazytime. Without this the flag stays set and may cause
additional unnecessary calls during inode deactivation.
- Increase tmpfs size in mount_setattr selftests. A recent commit
bumped the ext4 image size to 2 GB but didn't adjust the tmpfs
backing store, so mkfs.ext4 fails with ENOSPC writing metadata.
- Fix an invalid folio access in iomap when i_blkbits matches the folio
size but differs from the I/O granularity. The cur_folio pointer
would not get invalidated and iomap_read_end() would still be called
on it despite the IO helper owning it.
- Fix hash_name() docstring.
- Fix read abandonment during netfs retry where the subreq variable
used for abandonment could be uninitialized on the first pass or
point to a deleted subrequest on later passes.
- Don't block sync for filesystems with no data integrity guarantees.
Add a SB_I_NO_DATA_INTEGRITY superblock flag replacing the per-inode
AS_NO_DATA_INTEGRITY mapping flag so sync kicks off writeback but
doesn't wait for flusher threads. This fixes a suspend-to-RAM hang on
fuse-overlayfs where the flusher thread blocks when the fuse daemon
is frozen.
- Fix a lockdep splat in iomap when reads fail. iomap_read_end_io()
invokes fserror_report() which calls igrab() taking i_lock in hardirq
context while i_lock is normally held with interrupts enabled. Kick
failed read handling to a workqueue.
- Remove the redundant netfs_io_stream::front member and use
stream->subrequests.next instead, fixing a potential issue in the
direct write code path.
* tag 'vfs-7.0-rc6.fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
netfs: Fix the handling of stream->front by removing it
iomap: fix lockdep complaint when reads fail
writeback: don't block sync for filesystems with no data integrity guarantees
netfs: Fix read abandonment during retry
vfs: fix docstring of hash_name()
iomap: fix invalid folio access when i_blkbits differs from I/O granularity
selftests/mount_setattr: increase tmpfs size for idmapped mount tests
fs: clear I_DIRTY_TIME in sync_lazytime
netfs: Fix NULL pointer dereference in netfs_unbuffered_write() on retry
netfs: Fix kernel BUG in netfs_limit_iter() for ITER_KVEC iterators
Bunch of driver fixes for:
- Xilinx regmap init error handling, dma_device directions, residue
calculation, reset related timeout fixes.
- Renesas CHCTRL updates and driver list fixes
- DW HDMA cycle bits and MSI data programming fix
- IDXD pile of fixes for memeory leak and FLR fixes
-----BEGIN PGP SIGNATURE-----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=MxNf
-----END PGP SIGNATURE-----
Merge tag 'dmaengine-fix-7.0' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine
Pull dmaengine fixes from Vinod Koul:
"A bunch of driver fixes with idxd ones being the biggest:
- Xilinx regmap init error handling, dma_device directions, residue
calculation, and reset related timeout fixes
- Renesas CHCTRL updates and driver list fixes
- DW HDMA cycle bits and MSI data programming fix
- IDXD pile of fixes for memeory leak and FLR fixes"
* tag 'dmaengine-fix-7.0' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine: (21 commits)
dmaengine: xilinx_dma: Fix reset related timeout with two-channel AXIDMA
dmaengine: xilinx: xilinx_dma: Fix unmasked residue subtraction
dmaengine: xilinx: xilinx_dma: Fix residue calculation for cyclic DMA
dmaengine: xilinx: xilinx_dma: Fix dma_device directions
dmaengine: sh: rz-dmac: Move CHCTRL updates under spinlock
dmaengine: sh: rz-dmac: Protect the driver specific lists
dmaengine: idxd: fix possible wrong descriptor completion in llist_abort_desc()
dmaengine: xilinx: xdma: Fix regmap init error handling
dmaengine: dw-edma: Fix multiple times setting of the CYCLE_STATE and CYCLE_BIT bits for HDMA.
dmaengine: idxd: Fix leaking event log memory
dmaengine: idxd: Fix freeing the allocated ida too late
dmaengine: idxd: Fix memory leak when a wq is reset
dmaengine: idxd: Fix not releasing workqueue on .release()
dmaengine: idxd: Wait for submitted operations on .device_synchronize()
dmaengine: idxd: Flush all pending descriptors
dmaengine: idxd: Flush kernel workqueues on Function Level Reset
dmaengine: idxd: Fix possible invalid memory access after FLR
dmaengine: idxd: Fix crash when the event log is disabled
dmaengine: idxd: Fix lockdep warnings when calling idxd_device_config()
dmaengine: dw-edma: fix MSI data programming for multi-IRQ case
...
designware: fix resume-probe race causing NULL-deref in amdisp
imx: fix timeout on repeated reads and extra clock at end
MAINTAINERS: drop outdated I2C website
-----BEGIN PGP SIGNATURE-----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=3asa
-----END PGP SIGNATURE-----
Merge tag 'i2c-for-7.0-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux
Pull i2c fixes from Wolfram Sang:
- designware: fix resume-probe race causing NULL-deref in amdisp
- imx: fix timeout on repeated reads and extra clock at end
- MAINTAINERS: drop outdated I2C website
* tag 'i2c-for-7.0-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
MAINTAINERS: drop outdated I2C website
i2c: designware: amdisp: Fix resume-probe race condition issue
i2c: imx: ensure no clock is generated after last read
i2c: imx: fix i2c issue when reading multiple messages
* Lots of small and not-so-small fixes for the newly rewritten gmap,
mostly affecting the handling of nested guests.
x86:
* Fix an issue with shadow paging, which causes KVM to install an MMIO PTE
in the shadow page tables without first zapping a non-MMIO SPTE if KVM
didn't see the write that modified the shadowed guest PTE. While commit
a54aa15c6b was right about it being impossible to miss such a write
if it was coming from the guest, it failed to account for writes to
guest memory that are outside the scope of KVM: if userspace modifies
the guest PTE, and then the guest hits a relevant page fault, KVM will
get confused.
-----BEGIN PGP SIGNATURE-----
iQFIBAABCgAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmnH3j8UHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroOWRQf7BD1dgyO9Id+Y/QQJPzZ0z/zGbNWT
jLDTpapxSB960AybvmkOl0pgr7AJrNN+iWQ5cbod/41NKEdJn++ME++NFQlt15oH
gZAMdVr72qklyVFOq3BZhQRskleGo35A/YYznKf+re4tdvL5fynyYTLDwVkDR4NU
tCwHCg+B6bVSNOLjxMm5eOpDXoboGiwohFYay7IclsXibjDlKyFaj9mZPJW1E6qy
SUp+nuseUTf8RFFscNTsW6XRPa/Y7RctPBNQuGSiw3rxFXsq+VyD6Y/AOklbdeyz
8u+25gdKm65sdXFmLWIN1Ogec0DcKMgdNpFrgEj+9PPWyHDHikqksv/vRw==
=/YA7
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull kvm fixes from Paolo Bonzini:
"s390:
- Lots of small and not-so-small fixes for the newly rewritten gmap,
mostly affecting the handling of nested guests.
x86:
- Fix an issue with shadow paging, which causes KVM to install an
MMIO PTE in the shadow page tables without first zapping a non-MMIO
SPTE if KVM didn't see the write that modified the shadowed guest
PTE.
While commit a54aa15c6b ("KVM: x86/mmu: Handle MMIO SPTEs
directly in mmu_set_spte()") was right about it being impossible to
miss such a write if it was coming from the guest, it failed to
account for writes to guest memory that are outside the scope of
KVM: if userspace modifies the guest PTE, and then the guest hits a
relevant page fault, KVM will get confused"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
KVM: x86/mmu: Only WARN in direct MMUs when overwriting shadow-present SPTE
KVM: x86/mmu: Drop/zap existing present SPTE even when creating an MMIO SPTE
KVM: s390: Fix KVM_S390_VCPU_FAULT ioctl
KVM: s390: vsie: Fix guest page tables protection
KVM: s390: vsie: Fix unshadowing while shadowing
KVM: s390: vsie: Fix refcount overflow for shadow gmaps
KVM: s390: vsie: Fix nested guest memory shadowing
KVM: s390: Correctly handle guest mappings without struct page
KVM: s390: Fix gmap_link()
KVM: s390: vsie: Fix check for pre-existing shadow mapping
KVM: s390: Remove non-atomic dat_crstep_xchg()
KVM: s390: vsie: Fix dat_split_ste()
-----BEGIN PGP SIGNATURE-----
iJEEABYKADkWIQRTLbB6QfY48x44uB6AXGG7T9hjvgUCackzVhsUgAAAAAAEAA5t
YW51MiwyLjUrMS4xMiwyLDIACgkQgFxhu0/YY75+AAEA54Z8n7PQ4NCdd3NxtfZY
vopaMNY5NbBzMpzZpPo/uNkA/R/zfRogLx9pLiBh4LgJIzNe3nSK7NUsKBZVXxo6
jcEL
=8HbQ
-----END PGP SIGNATURE-----
Merge tag 'for-linus-7.0a-rc6-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip
Pull xen fix from Juergen Gross:
"A single fix for a very rare bug introduced in rc5"
* tag 'for-linus-7.0a-rc6-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
xen/privcmd: unregister xenstore notifier on module exit
- Fix an early boot crash in AMD SEV-SNP guests, caused by incorrect
FSGSBASE init ordering. (Nikunj A Dadhania)
- Remove X86_CR4_FRED from the CR4 pinned bits mask, to fix a race
window during the bootup of SEV-{ES,SNP} or TDX guests, which
can crash them if they trigger exceptions in that window.
(Borislav Petkov)
- Fix early boot failures on SEV-ES/SNP guests, due to incorrect
early GHCB access. (Nikunj A Dadhania)
- Add clarifying comment to the CRn pinning logic, to avoid
future confusion & bugs. (Peter Zijlstra)
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=I3Gh
-----END PGP SIGNATURE-----
Merge tag 'x86-urgent-2026-03-29' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Ingo Molnar:
- Fix an early boot crash in AMD SEV-SNP guests, caused by incorrect
FSGSBASE init ordering (Nikunj A Dadhania)
- Remove X86_CR4_FRED from the CR4 pinned bits mask, to fix a race
window during the bootup of SEV-{ES,SNP} or TDX guests, which can
crash them if they trigger exceptions in that window (Borislav
Petkov)
- Fix early boot failures on SEV-ES/SNP guests, due to incorrect early
GHCB access (Nikunj A Dadhania)
- Add clarifying comment to the CRn pinning logic, to avoid future
confusion & bugs (Peter Zijlstra)
* tag 'x86-urgent-2026-03-29' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/cpu: Add comment clarifying CRn pinning
x86/fred: Fix early boot failures on SEV-ES/SNP guests
x86/cpu: Remove X86_CR4_FRED from the CR4 pinned bits mask
x86/cpu: Enable FSGSBASE early in cpu_init_exception_handling()
which may cause missed expirations or incorrect overrun accounting.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=hDiV
-----END PGP SIGNATURE-----
Merge tag 'timers-urgent-2026-03-29' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull timer fix from Ingo Molnar:
"Fix an argument order bug in the alarm timer forwarding logic, which
may cause missed expirations or incorrect overrun accounting"
* tag 'timers-urgent-2026-03-29' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
alarmtimer: Fix argument order in alarm_timer_forward()
- Tighten up the sys_futex_requeue() ABI a bit, to disallow
dissimilar futex flags and potential UaF access. (Peter Zijlstra)
- Fix UaF between futex_key_to_node_opt() and vma_replace_policy()
(Hao-Yu Yang)
- Clear stale exiting pointer in futex_lock_pi() retry path,
which bug triggered a warning (and potential misbehavior)
in stress-testing. (Davidlohr Bueso)
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=85AU
-----END PGP SIGNATURE-----
Merge tag 'locking-urgent-2026-03-29' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull futex fixes from Ingo Molnar:
- Tighten up the sys_futex_requeue() ABI a bit, to disallow dissimilar
futex flags and potential UaF access (Peter Zijlstra)
- Fix UaF between futex_key_to_node_opt() and vma_replace_policy()
(Hao-Yu Yang)
- Clear stale exiting pointer in futex_lock_pi() retry path, which
triggered a warning (and potential misbehavior) in stress-testing
(Davidlohr Bueso)
* tag 'locking-urgent-2026-03-29' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
futex: Clear stale exiting pointer in futex_lock_pi() retry path
futex: Fix UaF between futex_key_to_node_opt() and vma_replace_policy()
futex: Require sys_futex_requeue() to have identical flags
