Defines a constant for the battery sensing channel, typically the last
channel of the ADC. Clarifies channel usage and improves code
readability.
Signed-off-by: Billy Tsai <billy_tsai@aspeedtech.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Add support for the Linear Technology LTC2654 quad DAC family.
The LTC2654 is a 4-channel, 16-/12-bit DAC with SPI interface,
sharing the same 24-bit SPI protocol as the existing LTC2632/
LTC2634/LTC2636 devices supported by this driver.
The 12-bit variants of LTC2654 reuse existing LTC2634 chip_info
structs as they are register-compatible.
Add support for the following variants:
- LTC2654L-16: 16-bit, 2.5V internal reference
- LTC2654L-12: 12-bit, 2.5V internal reference
- LTC2654H-16: 16-bit, 4.096V internal reference
- LTC2654H-12: 12-bit, 4.096V internal reference
Signed-off-by: David Marinovic <david.marinovic@pupin.rs>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Add compatible strings for the LTC2654 quad-channel DAC family.
The LTC2654 devices are 4-channel, 16-/12-bit DACs with an internal
reference and SPI interface. They use the same 24-bit SPI command
format as the LTC2632/2634/2636 family.
The 16-bit variants (LTC2654-L16 and LTC2654-H16) require new
compatible strings, as no existing compatibles support 16-bit
resolution.
The 12-bit variants (LTC2654-L12 and LTC2654-H12) are register-
compatible with LTC2634-L12 and LTC2634-H12 respectively, and can
use them as fallback compatibles.
Signed-off-by: David Marinovic <david.marinovic@pupin.rs>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Remove the ltc2632_chip_info_tbl[] array and related
ltc2632_supported_device_ids enum used for looking up chip-specific
information. Instead, use separate static const struct
ltc2632_chip_info objects for each supported chip variant.
Suggested-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Signed-off-by: David Marinovic <david.marinovic@pupin.rs>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Replace sprintf() with sysfs_emit() in sysfs attribute show functions.
sysfs_emit() is the preferred API for sysfs callbacks as it is aware
of the PAGE_SIZE buffer limit.
Also simplify the wavetype_available show functions by removing
the intermediate string variable and returning directly from each
branch.
Signed-off-by: Gabriel Rondon <grondon@gmail.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Replace sprintf() with sysfs_emit() in all sysfs attribute show
functions. sysfs_emit() is the preferred API for sysfs callbacks as
it is aware of the PAGE_SIZE buffer limit.
Also remove the unnecessary (int) cast in ad5933_show_frequency()
and use the correct format specifier %llu for the unsigned long long
freqreg variable.
Signed-off-by: Gabriel Rondon <grondon@gmail.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Add supply, I2C and cathode voltage regulators to the sensor and enable
them. This keeps the sensor powered on even after its only supply shared
by another device shuts down.
Reported-by: Raymond Hackley <raymondhackley@protonmail.com>
Reviewed-by: David Lechner <dlechner@baylibre.com>
Signed-off-by: Erikas Bitovtas <xerikasxx@gmail.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
The data->near_level variable is already assigned 0 during
devm_kzalloc(), therefore checking if the property is present and then
assigning it 0 is redundant. Remove the check for device tree property
and let it fail silently if it is missing or invalid.
Reviewed-by: David Lechner <dlechner@baylibre.com>
Signed-off-by: Erikas Bitovtas <xerikasxx@gmail.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
After moving data->client and client->dev into variables of their own,
replace all instances of data->client and client->dev being used in
vcnl4200_init() and vcnl4000_probe() by the said variables to reduce
clutter.
Reviewed-by: David Lechner <dlechner@baylibre.com>
Signed-off-by: Erikas Bitovtas <xerikasxx@gmail.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
The error code is available in the log after return. In our case,
attaching a triggered buffer can only fail if we are out of memory, as
no other buffer is being attached. Remove duplicate error messages to
reduce noise in dmesg.
Reviewed-by: David Lechner <dlechner@baylibre.com>
Signed-off-by: Erikas Bitovtas <xerikasxx@gmail.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Replace mutex_init() used across the driver with its device-managed
counterpart, so all assigned mutexes get destroyed.
Reviewed-by: David Lechner <dlechner@baylibre.com>
Signed-off-by: Erikas Bitovtas <xerikasxx@gmail.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Given both vcnl4000_init() and vcnl4200_init() end with
dev->chip_spec->set_power_state(), they can be called once from the
probe to enable the sensors. Move the set_power_state function from init
and call it after init function in probe.
Reviewed-by: David Lechner <dlechner@baylibre.com>
Signed-off-by: Erikas Bitovtas <xerikasxx@gmail.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Sort include headers by file name for better readability.
Reviewed-by: David Lechner <dlechner@baylibre.com>
Signed-off-by: Erikas Bitovtas <xerikasxx@gmail.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
These sensors can accept 2 supplies - one for the sensor and one for IR
LED [1]. Add supply properties for the sensor - 2 for the sensors and
one external, for their open drain interrupt line, to ensure the sensor
is powered on before proceeding with setup.
[1] https://www.vishay.com/docs/84274/vcnl4040.pdf
Reviewed-by: David Lechner <dlechner@baylibre.com>
Signed-off-by: Erikas Bitovtas <xerikasxx@gmail.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Convert __devm_iio_backend_fwnode_get() to use the __free(fwnode_handle)
cleanup attribute for the fwnode_back variable, removing the need for
manual fwnode_handle_put() calls. Move the declaration closer to its
first use, narrowing its scope.
No functional change.
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Reviewed-by: Nuno Sá <nuno.sa@analog.com>
Signed-off-by: Antoniu Miclaus <antoniu.miclaus@analog.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Add support for the Analog Devices ADXL371, a +-200g 3-axis MEMS
accelerometer sharing the same register map as the ADXL372 but with
different ODR values (320/640/1280/2560/5120 Hz vs 400/800/1600/3200/
6400 Hz), different bandwidth values, and different timer scale
factors for activity/inactivity detection.
Due to a silicon anomaly (er001) causing FIFO data misalignment on
all current ADXL371 silicon, FIFO and triggered buffer support is
disabled for the ADXL371 - only direct mode reads are supported.
Signed-off-by: Antoniu Miclaus <antoniu.miclaus@analog.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Extract the triggered buffer, trigger allocation, and IRQ request
logic from adxl372_probe() into a dedicated adxl372_buffer_setup()
helper. This reduces the probe function complexity and prepares for
conditionally disabling buffer support on device variants with
known FIFO issues.
No functional change intended.
Signed-off-by: Antoniu Miclaus <antoniu.miclaus@analog.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Add the adi,adxl371 compatible string to the ADXL372 binding. The
ADXL371 is a +-200g 3-axis MEMS accelerometer nearly identical to
the ADXL372 in register layout, differing only in ODR/bandwidth
values, timer scale factors, and a silicon anomaly affecting FIFO
operation.
Update the title and description to reflect both devices.
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Antoniu Miclaus <antoniu.miclaus@analog.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Introduce a chip_info structure to parameterize device-specific
properties such as ODR/bandwidth frequency tables, activity/inactivity
timer scale factors, and the maximum ODR value. This refactors the
driver to use chip_info lookups instead of hardcoded values, preparing
the driver to support multiple device variants.
The sampling_frequency and filter_low_pass_3db_frequency available
attributes are switched from custom sysfs callbacks to read_avail()
based handling via info_mask_shared_by_type_available. This enforces
consistent formatting through the IIO framework and makes the values
accessible to in-kernel consumers.
The SPI/I2C probe functions are updated to pass a chip_info pointer
instead of a device name string.
No functional change intended.
Signed-off-by: Antoniu Miclaus <antoniu.miclaus@analog.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Fix incorrect whitespace around comma on line 325 to comply with
kernel coding style. This silences checkpatch errors "ERROR: space
prohibited before that ','" and "ERROR: space required after that ','".
No functional change.
Signed-off-by: Giorgi Tchankvetadze <giorgitchankvetadze1997@gmail.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Remove the chip_info[] array and related enum used for looking up chip-
specific information. Instead, use individual structs directly in the
module device tables.
Also update to use spi_get_device_match_data() in case the devicetree
table is ever used instead of the SPI device ID table.
Signed-off-by: David Lechner <dlechner@baylibre.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Fix lines starting with spaces instead of tabs to comply with the
kernel coding style.
No functional change.
Signed-off-by: Giorgi Tchankvetadze <giorgitchankvetadze1997@gmail.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Replace manual mutex_lock/mutex_unlock pair with guard(mutex) in
adxl372_write_threshold_value(). This ensures the mutex is released
on all return paths and allows returning directly without a goto label.
Signed-off-by: Rajveer Chaudhari <rajveer.chaudhari.linux@gmail.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Replace manual mutex_lock/mutex_unlock pair with guard(mutex) in
adxl313_read_axis(). This ensures the mutex is released on all
return paths and allows returning directly without a goto label.
Signed-off-by: Rajveer Chaudhari <rajveer.chaudhari.linux@gmail.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
The scan_mask flexible array member in hw_consumer_buffer duplicates
the scan_mask pointer already present in struct iio_buffer. Remove it
and allocate the bitmap directly with bitmap_zalloc(), assigning it to
buf->buffer.scan_mask. This simplifies the code and there's no need for
the flex array allocation.
Signed-off-by: Nuno Sá <nuno.sa@analog.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
There is no reason to extend the lifetime of this post removal of the
driver when it's only needed in one spot.
Moved tsc_regmap assignment to avoid two nvmem_cell_put calls.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
There is absolutely no reason to pospone cleanup of this post driver
removal. Just do it immediately.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Reviewed-by: Nuno Sá <nuno.sa@analog.com>
Reviewed-by: Eugen Hristev <eugen.hristev@linaro.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
In all cases in which a struct acpi_driver is used for binding a driver
to an ACPI device object, a corresponding platform device is created by
the ACPI core and that device is regarded as a proper representation of
underlying hardware. Accordingly, a struct platform_driver should be
used by driver code to bind to that device. There are multiple reasons
why drivers should not bind directly to ACPI device objects [1].
Overall, it is better to bind drivers to platform devices than to their
ACPI companions, so convert the ACPI ambient light sensor driver to a
platform one.
After this change, the subordinate IIO device will be registered under
the platform device used for driver binding instead of its ACPI
companion.
While this is not expected to alter functionality, it changes sysfs
layout and so it will be visible to user space.
Link: https://lore.kernel.org/all/2396510.ElGaqSPkdT@rafael.j.wysocki/ [1]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
To facilitate subsequent conversion of the driver to a platform one,
make it install an ACPI notify handler directly instead of using
a .notify() callback in struct acpi_driver.
No intentional functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
When device_property_read_string() fails, str is left uninitialized
but the code falls through to strcmp(str, ...), dereferencing a garbage
pointer. Replace manual read/strcmp with
device_property_match_property_string() and consolidate the SE mode
enums into a single sequential enum, mapping to hardware register
values via a switch consistent with other bitfields in the driver.
Several cleanup patches have been applied to this driver recently so
this will need a manual backport.
Fixes: da35a7b526 ("iio: frequency: admv1013: add support for ADMV1013")
Reviewed-by: Nuno Sá <nuno.sa@analog.com>
Signed-off-by: Antoniu Miclaus <antoniu.miclaus@analog.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reformat the device enum so each entry is on its own line and add a
trailing comma to the final enumerator. Also reformat the nearby monitor
speeds array for consistency.
No functional change.
Signed-off-by: Giorgi Tchankvetadze <giorgitchankvetadze1997@gmail.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Return -EINVAL instead of -1 when no matching gain value is found
in the gain table. Update the callers to propagate this error directly
rather than overwriting it with -EINVAL.
Signed-off-by: Antoniu Miclaus <antoniu.miclaus@analog.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Reviewed-by: Waqar Hameed <waqar.hameed@axis.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Add support for ADC found in Motorola Mot board, used as a base for
Atrix 4G and Droid X2 smartphones.
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Add compatible for ADC used in Mot board. Separate compatible is required
since ADC in the Mot board uses a unique set of configurations.
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Remove unused debug_reg_addr field from gp2ap020a00f_data
struct. The field is declared but never accessed in the
driver.
Signed-off-by: Antoniu Miclaus <antoniu.miclaus@analog.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Remove unused nlux_per_count field from apds9306_data
struct. The field is declared but never accessed in the
driver.
Acked-by: Subhajit Ghosh <subhajit.ghosh@tweaklogic.com>
Signed-off-by: Antoniu Miclaus <antoniu.miclaus@analog.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Remove unused drdy_trigger_enabled field from bmi323_data
struct. The field is declared but never accessed in the
driver.
Signed-off-by: Antoniu Miclaus <antoniu.miclaus@analog.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Remove unused interrupt_config field from hdc2010_data
struct. The field is declared but never accessed in the
driver.
Signed-off-by: Antoniu Miclaus <antoniu.miclaus@analog.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Remove unused id field from dac5571_data struct.
The field is declared but never accessed in the driver.
Signed-off-by: Antoniu Miclaus <antoniu.miclaus@analog.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Remove unused int_tone field from axi_dac_state struct.
The field is declared but never accessed in the driver.
Signed-off-by: Antoniu Miclaus <antoniu.miclaus@analog.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Remove unused enabled field from ads1015_channel_data
struct. The field is declared but never accessed in the
driver.
Signed-off-by: Antoniu Miclaus <antoniu.miclaus@analog.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Remove unused min_conversions field from nau7802_state
struct. The field is declared but never accessed in the
driver.
Signed-off-by: Antoniu Miclaus <antoniu.miclaus@analog.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Remove unused requestedmask field from max1363_state struct.
The field is declared but never accessed in the driver.
Signed-off-by: Antoniu Miclaus <antoniu.miclaus@analog.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Remove unused output_mode field from ad9467_state struct.
The field is declared but never accessed in the driver.
Signed-off-by: Antoniu Miclaus <antoniu.miclaus@analog.com>
Reviewed-by: Tomas Melin <tomas.melin@vaisala.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Remove unused int_vref_mv field from ad7793_state struct.
The field is declared but never accessed in the driver.
Signed-off-by: Antoniu Miclaus <antoniu.miclaus@analog.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Remove unused mclk_div field from ad7768_state struct.
The field is declared but never accessed in the driver.
Signed-off-by: Antoniu Miclaus <antoniu.miclaus@analog.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Remove unused dec_rate field from ad4080_state struct.
The driver reads/writes decimation rate directly from
hardware registers via ad4080_get_dec_rate() and
ad4080_set_dec_rate() functions.
Signed-off-by: Antoniu Miclaus <antoniu.miclaus@analog.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Triggers exist under /sys/bus/iio/devices/, not under /sys/class/iio.
/sys/class/iio does not even exist. Use the current path.
Signed-off-by: Cosmin Tanislav <cosmin-gabriel.tanislav.xa@renesas.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Convert the iio registration to use devm_* helpers so the probe no
longer needs a separate cleanup path and remove callback can also drop
the unregister. After this there is no need for having a remove
callback, so remote it.
No functional change intended.
Suggested-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Reviewed-by: David Lechner <dlechner@baylibe.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Signed-off-by: Harshit Mogalapalli <harshit.m.mogalapalli@oracle.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Used devm_add_action_or_reset() for shutting down the interrupts.
Make sca3000_stop_all_interrupts() return void now that it always hooks
into devm cleanup.
No functional change intended.
Suggested-by: David Lechner <dlechner@baylibre.com>
Suggested-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Signed-off-by: Harshit Mogalapalli <harshit.m.mogalapalli@oracle.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
