We have approximately two copies of pre_commit_crtc_state(),
one in the DSB code, the other in the vblank evasion code.
Combine them into one. The slight difference between the two
is that vblank evasion doesn't have a full atomic state (when
called from the legacy cursor code), so it gets the old and
new crtc state passed in by hand.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241210211007.5976-11-ville.syrjala@linux.intel.com
Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
When looking at raw hardware scanline numbers it's helpful to
remember what the offset between the hardware values and our
more human readable numbers should be. Include that in the state dump.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241210211007.5976-9-ville.syrjala@linux.intel.com
Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Dump the calculated vmin/vmax vtotal values in addition to the
raw vmin/vmax/flipline values. Makes it much easier to see what
kind of scanline values we should be expecting from the hardware.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241210211007.5976-8-ville.syrjala@linux.intel.com
Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
On ICL/TGL vmin/vmax/flipline won't actually match the
vtotal values (currently they do, but that is wrong and
needs to be fixed). Add a few helpers that will compute the
actual vtotal values for us.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241210211007.5976-5-ville.syrjala@linux.intel.com
Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Make sure we have enough vblank for the computed vblank delay.
Supposedly we'd reject things anyway later if this gets violated,
but it seems nicer to do some basic sanity checks early just
so we can be sure the basic relationship vblank_end > vblank_start
always holds.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241210211007.5976-3-ville.syrjala@linux.intel.com
Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Pull the vblank delay computation into a separate function.
We'll need more logic here soon and we don't want to pollute
intel_crtc_compute_config() with low level details.
We'll use HAS_DSB() to determine if any delay might be required
or not because delayed vblank only really exists for the
purposes of the DSB. It also doesn't event exists on any pre-tgl
platforms, which also don't have DSB. I was midly tempted
to check for the enable_dsb modparam here actually, but as
that can be changed dynamically via debugfs we'd need to either
reconfigure it on the fly or force a modeset. Neither will happen
currently, so we'll just assume DSB may be used of the platform
supports it.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241210211007.5976-2-ville.syrjala@linux.intel.com
Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Make sure the user supplied offset[] for the clear color plane
fits within the actual BO. Note that we use tile units to track
the size here. All the other color/aux planes are already
being checked correctly.
Cc: Sagar Ghuge <sagar.ghuge@intel.com>
Cc: Nanley Chery <nanley.g.chery@intel.com>
Cc: Xi Ruoyao <xry111@xry111.site>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241129065014.8363-4-ville.syrjala@linux.intel.com
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
We're currently failing to provide any debug output when the
user passes in a misaligned offset for the clear color plane.
Add some debugs prints to make debugging actually possible.
Cc: Sagar Ghuge <sagar.ghuge@intel.com>
Cc: Nanley Chery <nanley.g.chery@intel.com>
Cc: Xi Ruoyao <xry111@xry111.site>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241129065014.8363-3-ville.syrjala@linux.intel.com
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Mesa changed its clear color alignment from 4k to 64 bytes
without informing the kernel side about the change. This
is now likely to cause framebuffer creation to fail.
The only thing we do with the clear color buffer in i915 is:
1. map a single page
2. read out bytes 16-23 from said page
3. unmap the page
So the only requirement we really have is that those 8 bytes
are all contained within one page. Thus we can deal with the
Mesa regression by reducing the alignment requiment from 4k
to the same 64 bytes in the kernel. We could even go as low as
32 bytes, but IIRC 64 bytes is the hardware requirement on
the 3D engine side so matching that seems sensible.
Note that the Mesa alignment chages were partially undone
so the regression itself was already fixed on userspace
side.
Cc: stable@vger.kernel.org
Cc: Sagar Ghuge <sagar.ghuge@intel.com>
Cc: Nanley Chery <nanley.g.chery@intel.com>
Reported-by: Xi Ruoyao <xry111@xry111.site>
Closes: https://gitlab.freedesktop.org/drm/i915/kernel/-/issues/13057
Closes: https://lore.kernel.org/all/45a5bba8de009347262d86a4acb27169d9ae0d9f.camel@xry111.site/
Link: 17f97a69c1
Link: 888f63cf1b
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241129065014.8363-2-ville.syrjala@linux.intel.com
Tested-by: Xi Ruoyao <xry111@xry111.site>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
The Balancer and DCC strategies were left off on a fear that
these strategies would conflict with the i915's waitboost.
However, on MTL and Beyond these strategies are only active in
certain conditions where the system is TDP limited.
So, they don't conflict, but help the
waitboost by guaranteeing a bit more of GT frequency.
Without these strategies we were likely leaving some performance
behind on some scenarios.
With this change in place, the enabling/disabling of DCC and Balancer
will now be chosen by GuC, on a platform/GT basis.
v2: - Fix typos and be clear on GuC decision on platform basis (Vinay)
- Limit change to MTL and beyond, where GuC started to take
TDP limit into consideration.
v3: Fix compilation. Actually amend the changes...
Reviewed-by: Vinay Belgaumkar <vinay.belgaumkar@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250110144640.1032250-1-rodrigo.vivi@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
The last use of intel_gvt_in_force_nonpriv_whitelist() was
removed in 2020 by
commit 02dd2b12a6 ("drm/i915/gvt: unify lri cmd handler and mmio
handlers")
Remove it.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Reviewed-by: Zhenyu Wang <zhenyuw.linux@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241222002043.173080-4-linux@treblig.org
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
intel_vgpu_decode_sprite_plane() was added in 2017 by
commit 9f31d1063b ("drm/i915/gvt: Add framebuffer decoder support")
but has remained unused.
Remove it.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Reviewed-by: Zhenyu Wang <zhenyuw.linux@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241222002043.173080-3-linux@treblig.org
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
intel_gvt_ggtt_h2g_index() and intel_gvt_ggtt_index_g2h() were
added in 2016 by
commit 2707e44466 ("drm/i915/gvt: vGPU graphics memory virtualization")
but haven't been used.
Remove them.
They were the only users of intel_gvt_ggtt_gmadr_g2h() and
intel_gvt_ggtt_gmadr_h2g().
Remove them.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Reviewed-by: Zhenyu Wang <zhenyuw.linux@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241222002043.173080-2-linux@treblig.org
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
I won't be able to use intel account, so this switches address to my
gmail account.
Cc: Zhi Wang <zhi.wang.linux@gmail.com>
Cc: Zhiyuan Lv <zhiyuan.lv@intel.com>
Cc: James Wu <james.y.wu@intel.com>
Cc: Zhenyu Wang <zhenyuw.linux@gmail.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Acked-by: Zhi Wang <zhiwang@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20241113063700.4460-1-zhenyuw@linux.intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
The bspec only asks the driver to reprogram the DBUF_CTL's
DBUF_TRACKER_STATE_SERVICE field to 0x8 on DG2 and platforms with
display version 12. All other platforms should avoid reprogramming
this register at driver init.
Although we've been accidentally reprogramming DBUF_CTL on platforms
where the spec does not ask us to, that mistake has been harmless so
far because the value being programmed by the driver happened to
match the hardware's default settings.
So, update DBUF_TRACKER_STATE_SERVICE field to 0x8 only for
1. display version 12
2. DG2.
Other platforms unless stated should use their default value.
Bspec: 49213
Signed-off-by: Ravi Kumar Vodapalli <ravi.kumar.vodapalli@intel.com>
Reviewed-by: Jonathan Cavitt <jonathan.cavitt@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250108200210.1815229-1-ravi.kumar.vodapalli@intel.com
[mattrope: Tweaked patch subject to accurately reflect content]
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
When debugging issues that might be related to the DMC wakelock code, it
might be useful to compare runs with the lock acquired while DC states
are enabled vs the regular case. If issues disappear with the former, it
might be a symptom of something wrong in our code. Support having this
"always locked" behavior with enable_dmc_wl=3.
Signed-off-by: Gustavo Sousa <gustavo.sousa@intel.com>
Reviewed-by: Dnyaneshwar Bhadane <dnyaneshwar.bhadane@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241219221429.109668-5-gustavo.sousa@intel.com
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
When debugging issues that might be related to the DMC wakelock code, it
is sometimes useful to compare runs when we match any register offset vs
the regular case. If issues disappear when we take the wakelock for any
register, it might indicate that we are missing some offset to be
tracked. Support matching any register offset with enable_dmc_wl=2.
Signed-off-by: Gustavo Sousa <gustavo.sousa@intel.com>
Reviewed-by: Dnyaneshwar Bhadane <dnyaneshwar.bhadane@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241219221429.109668-4-gustavo.sousa@intel.com
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
We already provide the value resulting from sanitization of
enable_dmc_wl in dmesg, however the reader will need to either have the
meanings memorized or look them up in the parameter's documentation.
Let's make things easier by providing a short human-readable name for
the parameter in dmesg.
Signed-off-by: Gustavo Sousa <gustavo.sousa@intel.com>
Reviewed-by: Dnyaneshwar Bhadane <dnyaneshwar.bhadane@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241219221429.109668-3-gustavo.sousa@intel.com
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Currently, after sanitization, enable_dmc_wl will behave like a boolean
parameter (enabled vs disabled). However, in upcoming changes, we will
allow more values for debugging purposes. For that, let's make the
sanitized value an enumeration.
Signed-off-by: Gustavo Sousa <gustavo.sousa@intel.com>
Reviewed-by: Dnyaneshwar Bhadane <dnyaneshwar.bhadane@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241219221429.109668-2-gustavo.sousa@intel.com
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Only intel_pmdemand.c should look inside the struct
intel_pmdemand_state. Indeed, this is already the case. Finish the job
and make struct intel_pmdemand_state opaque, preventing any direct pokes
at the guts of it in the future.
Cc: Gustavo Sousa <gustavo.sousa@intel.com>
Reviewed-by: Gustavo Sousa <gustavo.sousa@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/bc5f418785ecd51454761e9a55f21340470a92e3.1735662324.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Enable basic 128b/132b SST functionality without compression. Reuse
intel_dp_mtp_tu_compute_config() to figure out the TU after we've
determined we need to use an UHBR rate.
It's slightly complicated as the M/N computation is done in different
places in MST and SST paths, so we need to avoid trashing the values
later for UHBR.
If uncompressed UHBR fails, we drop to compressed non-UHBR, which is
quite likely to fail as well. We still lack 128b/132b SST+DSC.
We need mst_master_transcoder also for 128b/132b SST. Use cpu_transcoder
directly. Enhanced framing is "don't care" for 128b/132b link.
v2: mst_master_transcoder, enhanced framing (Imre)
Reviewed-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/084e4e05bf25a5dd396dd391014943d42b11c88d.1735912293.git.jani.nikula@intel.com
We'll want to distinguish 128b/132b SST and MST modes at state
readout. There's a catch, though. From the hardware perspective,
128b/132b SST and MST programming are pretty much the same. And we can't
really ask the sink at this point.
If we have more than one transcoder in 128b/132b mode associated with
the port, we can safely assume it's MST. But for MST with only a single
stream enabled, we are pretty much out of luck. Let's fall back to
looking at the software state, i.e. intel_dp->is_mst. It should be fine
for the state checker, but for hardware takeover at probe, we'll have to
trust the GOP has only enabled SST.
TODO: Not sure how this *or* our current code handles 128b/132b enabled
by GOP.
Cc: Imre Deak <imre.deak@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/119a773a0d4d74ad204435e462f8d12cb0ea4128.1735912293.git.jani.nikula@intel.com
Write the payload allocation table for 128b/132b SST. Use VCPID 1 and
start from slot 0, with dp_m_n.tu slots.
This is preparation for enabling 128b/132b SST. This path is not
reachable yet. Indeed, we don't yet compute TU for 128b/132b SST.
v2: Handle drm_dp_dpcd_write_payload() failures (Imre)
v3: Include drm_dp_helper.h (kernel test robot)
Reviewed-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250107095414.1244286-1-jani.nikula@intel.com
