If wait for ring space started just before migration, it can delay
the recovery process, by waiting without bailout path for up to 2
seconds.
Two second wait for recovery is not acceptable, and if the ring was
completely filled even without the migration temporarily stopping
execution, then such a wait will result in up to a thousand new jobs
(assuming constant flow) being added while the wait is happening.
While this will not cause data corruption, it will lead to warning
messages getting logged due to reset being scheduled on a GT under
recovery. Also several seconds of unresponsiveness, as the backlog
of jobs gets progressively executed.
Add a bailout condition, to make sure the recovery starts without
much delay. The recovery is expected to finish in about 100 ms when
under moderate stress, so the condition verification period needs to be
below that - settling at 64 ms.
The theoretical max time which the recovery can take depends on how
many requests can be emitted to engine rings and be pending execution.
While stress testing, it was possible to reach 10k pending requests
on rings when a platform with two GTs was used. This resulted in max
recovery time of 5 seconds. But in real life situations, it is very
unlikely that the amount of pending requests will ever exceed 100,
and for that the recovery time will be around 50 ms - well within our
claimed limit of 100ms.
Fixes: a4dae94aad ("drm/xe/vf: Wakeup in GuC backend on VF post migration recovery")
Signed-off-by: Tomasz Lis <tomasz.lis@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Link: https://patch.msgid.link/20251204200820.2206168-1-tomasz.lis@intel.com
The xe3p_xpc platform supports Indirect Ring State and
it is required for the upcoming multi-queue feature.
Signed-off-by: Niranjana Vishwanathapura <niranjana.vishwanathapura@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patch.msgid.link/20251204063451.1180387-2-niranjana.vishwanathapura@intel.com
The newly introduced "reasons" attribute already signifies possible
reasons for throttling and makes the prefix in individual attribute
names redundant while emitting them as an array. Skip the prefix.
Fixes: 83ccde67a3 ("drm/xe/gt_throttle: Avoid TOCTOU when monitoring reasons")
Signed-off-by: Raag Jadav <raag.jadav@intel.com>
Reviewed-by: Sk Anirban <sk.anirban@intel.com>
Link: https://patch.msgid.link/20251203123355.571606-1-raag.jadav@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
G2H credits should be in fully idle state when runtime suspending GuC CT.
Assert on mismatch.
Suggested-by: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: Raag Jadav <raag.jadav@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Link: https://patch.msgid.link/20251202083334.554045-1-raag.jadav@intel.com
The existing "pat" debugfs node dumps the live PAT registers. Under
SR-IOV the VF cannot touch those registers, so the file vanishes and
users lose all PAT visibility. Add a VF-safe "pat_sw_config" entry to
the VF-safe debugfs list. It prints the cached PAT table the driver
programmed, rather than poking HW, so PF and VF instances present the
same view.
This lets IGT and other tools query the PAT configuration without
carrying platform-specific tables or mirroring kernel logic.
v2: (Jonathan)
- Only append "(* = reserved entry)" to the PAT table header on Xe2+
platforms where it actually applies.
- Deduplicate the PTA/ATS mode printing by introducing the small
drm_printf_pat_mode() helper macro.
v3: (Matt)
- Print IDX[XE_CACHE_NONE_COMPRESSION] on every Xe2+ platform so the
dump always reflects the value the driver might use (even if it defaults
to 0) and future IP revisions don’t need extra condition tweaks.
v4:
- Drop the drm_printf_pat_mode macro and introduce a real helper
xe2_pat_entry_dump(). (Jani)
- Reuse the helper across all PTA/ATS/PAT dumps for xe2+ entries to keep
output format identical.
v5: (Matt)
- Split the original patch into two: one for refactoring helpers, one for
the new debugfs entry.
CC: Jani Nikula <jani.nikula@intel.com>
Suggested-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Xin Wang <x.wang@intel.com>
Reviewed-by: Jonathan Cavitt <jonathan.cavitt@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patch.msgid.link/20251205070633.28072-1-x.wang@intel.com
Move the PAT entry formatting into shared helper functions to ensure
consistency and enable code reuse.
This preparation is necessary for a follow-up patch that introduces a
software-based PAT dump, which is required for debugging on VFs where
hardware access is limited.
V2: (Matt)
- Xe3p XPC doesn’t define COMP_EN; omit it to match bspec and avoid
confusion.
Suggested-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Xin Wang <x.wang@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patch.msgid.link/20251205070220.27859-1-x.wang@intel.com
Add new debugfs entry "guc_log_lfd", prepared for output guc log
in LFD(Log Format Descriptors) format.
Signed-off-by: Zhanjun Dong <zhanjun.dong@intel.com>
Reviewed-by: Julia Filipchuk <julia.filipchuk@intel.com>
Signed-off-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Link: https://patch.msgid.link/20251127170759.2620994-7-zhanjun.dong@intel.com
Add GuC crash dump data empty check. LFD will only include crash dump
section when data is not empty.
Signed-off-by: Zhanjun Dong <zhanjun.dong@intel.com>
Reviewed-by: Julia Filipchuk <julia.filipchuk@intel.com>
Signed-off-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Link: https://patch.msgid.link/20251127170759.2620994-6-zhanjun.dong@intel.com
Add GuC LFD (Log Format Descriptors) related ABI definitions.
Signed-off-by: Zhanjun Dong <zhanjun.dong@intel.com>
Reviewed-by: Julia Filipchuk <julia.filipchuk@intel.com>
Signed-off-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Link: https://patch.msgid.link/20251127170759.2620994-3-zhanjun.dong@intel.com
Exec_queue's are only used for OAR/OAC functionality for OAG unit. Make
this requirement explicit, which avoids complications in the code for
other (non-OAG) OA units.
Signed-off-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Reviewed-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com>
Link: https://patch.msgid.link/20251202025115.373546-4-ashutosh.dixit@intel.com
gt_id was previously omitted from 'struct drm_xe_oa_unit' because it could
be determine from hwe's attached to the OA unit. However, we now have OA
units which don't have any hwe's attached to them. Hence add gt_id to
'struct drm_xe_oa_unit' in order to provide this needed information to
userspace.
Signed-off-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Reviewed-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com>
Link: https://patch.msgid.link/20251202025115.373546-3-ashutosh.dixit@intel.com
Use explicit struct initialization for struct xe_oa_regs to reduce chance
of error. Also add .oa_mmio_trg field to struct for completeness.
Signed-off-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Reviewed-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com>
Link: https://patch.msgid.link/20251202025115.373546-2-ashutosh.dixit@intel.com
The Xe driver fails to build when CONFIG_DRM_XE_GPUSVM is disabled
but CONFIG_DRM_GPUSVM is turned on, due to the clash of two commits:
In file included from drivers/gpu/drm/xe/xe_vm_madvise.c:8:
drivers/gpu/drm/xe/xe_svm.h: In function 'xe_svm_init':
include/linux/stddef.h:8:14: error: passing argument 5 of 'drm_gpusvm_init' makes integer from pointer without a cast [-Wint-conversion]
drivers/gpu/drm/xe/xe_svm.h:217:38: note: in expansion of macro 'NULL'
217 | NULL, NULL, 0, 0, 0, NULL, NULL, 0);
| ^~~~
In file included from drivers/gpu/drm/xe/xe_bo_types.h:11,
from drivers/gpu/drm/xe/xe_bo.h:11,
from drivers/gpu/drm/xe/xe_vm_madvise.c:11:
include/drm/drm_gpusvm.h:254:35: note: expected 'long unsigned int' but argument is of type 'void *'
254 | unsigned long mm_start, unsigned long mm_range,
| ~~~~~~~~~~~~~~^~~~~~~~
In file included from drivers/gpu/drm/xe/xe_vm_madvise.c:14:
drivers/gpu/drm/xe/xe_svm.h:216:16: error: too many arguments to function 'drm_gpusvm_init'; expected 10, have 11
216 | return drm_gpusvm_init(&vm->svm.gpusvm, "Xe SVM (simple)", &vm->xe->drm,
| ^~~~~~~~~~~~~~~
217 | NULL, NULL, 0, 0, 0, NULL, NULL, 0);
| ~
include/drm/drm_gpusvm.h:251:5: note: declared here
Adapt the caller to the new argument list by removing the extraneous
NULL argument.
Fixes: 9e97874148 ("drm/xe/userptr: replace xe_hmm with gpusvm")
Fixes: 10aa5c8060 ("drm/gpusvm, drm/xe: Fix userptr to not allow device private pages")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Link: https://patch.msgid.link/20251204094704.1030933-1-arnd@kernel.org
The Makefile logic for building xe_sriov_vfio.o was added incorrectly,
as setting CONFIG_XE_VFIO_PCI=m means it doesn't get included into a
built-in xe driver:
ERROR: modpost: "xe_sriov_vfio_stop_copy_enter" [drivers/vfio/pci/xe/xe-vfio-pci.ko] undefined!
ERROR: modpost: "xe_sriov_vfio_stop_copy_exit" [drivers/vfio/pci/xe/xe-vfio-pci.ko] undefined!
ERROR: modpost: "xe_sriov_vfio_suspend_device" [drivers/vfio/pci/xe/xe-vfio-pci.ko] undefined!
ERROR: modpost: "xe_sriov_vfio_wait_flr_done" [drivers/vfio/pci/xe/xe-vfio-pci.ko] undefined!
ERROR: modpost: "xe_sriov_vfio_error" [drivers/vfio/pci/xe/xe-vfio-pci.ko] undefined!
ERROR: modpost: "xe_sriov_vfio_resume_data_enter" [drivers/vfio/pci/xe/xe-vfio-pci.ko] undefined!
ERROR: modpost: "xe_sriov_vfio_resume_device" [drivers/vfio/pci/xe/xe-vfio-pci.ko] undefined!
ERROR: modpost: "xe_sriov_vfio_resume_data_exit" [drivers/vfio/pci/xe/xe-vfio-pci.ko] undefined!
ERROR: modpost: "xe_sriov_vfio_data_write" [drivers/vfio/pci/xe/xe-vfio-pci.ko] undefined!
ERROR: modpost: "xe_sriov_vfio_migration_supported" [drivers/vfio/pci/xe/xe-vfio-pci.ko] undefined!
WARNING: modpost: suppressed 3 unresolved symbol warnings because there were too many)
Check for CONFIG_XE_VFIO_PCI being enabled in the Makefile to decide whether to
include the object instead.
Fixes: 17f22465c5 ("drm/xe/pf: Export helpers for VFIO")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Link: https://patch.msgid.link/20251204094154.1029357-1-arnd@kernel.org
Introduce DRM_XE_GEM_CREATE_FLAG_NO_COMPRESSION to let userspace
opt out of CCS compression on a per-BO basis. When set, the driver
maps this to XE_BO_FLAG_NO_COMPRESSION, skips CCS metadata
allocation/clearing, and rejects compressed PAT indices at vm_bind.
This avoids extra memory ops and manual CCS state handling for buffers.
To allow userspace to detect at runtime whether the kernel supports this
feature, add DRM_XE_QUERY_CONFIG_FLAG_HAS_NO_COMPRESSION_HINT and expose
it via query_config() on Xe2+ platforms.
Mesa PR: https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/38425
IGT PR: https://patchwork.freedesktop.org/patch/685180/
v2
- Changed error code from -EINVAL to -EOPNOTSUPP for unsupported flag
usage on pre-Xe2 platforms
- Fixed checkpatch warning in xe_vm.c
- Fixed kernel-doc formatting in xe_drm.h
v3
- Rebase
- Updated commit title and description
- Added UAPI for DRM_XE_QUERY_CONFIG_FLAG_HAS_NO_COMPRESSION_HINT and
exposed it via query_config()
v4
- Rebase
v5
- Included Mesa PR and IGT PR in the commit description
- Used xe_pat_index_get_comp_en() to extract the compression
v6
- Added XE_IOCTL_DBG() checks for argument validation
Suggested-by: Matthew Auld <matthew.auld@intel.com>
Suggested-by: José Roberto de Souza <jose.souza@intel.com>
Acked-by: José Roberto de Souza <jose.souza@intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Signed-off-by: Sanjay Yadav <sanjay.kumar.yadav@intel.com>
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patch.msgid.link/20251204040402.2692921-2-sanjay.kumar.yadav@intel.com
As per the updated WA database, Wa_18041344222 no longer applies to
graphics IP version 30.01. Remove it.
Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: Gustavo Sousa <gustavo.sousa@intel.com>
Signed-off-by: Harish Chegondi <harish.chegondi@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patch.msgid.link/280ab3e8dce8d7a40540ae634a5432694ac17ab0.1763762330.git.harish.chegondi@intel.com
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Do not reference the loop variable job after the loop has exited.
Instead, save the job from the last iteration of the loop.
Fixes: 00937fe192 ("drm/xe/vf: Start re-emission from first unsignaled job during VF migration")
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Closes: https://lore.kernel.org/r/202511291102.jnnKP6IB-lkp@intel.com/
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Dnyaneshwar Bhadane <dnyaneshwar.bhadane@intel.com>
Link: https://patch.msgid.link/20251203011809.968893-1-matthew.brost@intel.com
xe_sync_in_fence_get() uses the same kind of mismatched fence array
allocation vs looping logic that was previously noted and changed by
commit 0a4c2ddc71 ("drm/xe/vm: Use for_each_tlb_inval() to calculate
invalidation fences"). As with that commit, the mismatch doesn't cause
any problem at the moment since for_each_tlb_inval() loops the same
number of times as XE_MAX_GT_PER_TILE (2). However we don't want to
assume that these will always be the same in the future, so switch to
using for_each_tlb_inval() in both places to future-proof the code.
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Link: https://patch.msgid.link/20251202222551.1858930-2-matthew.d.roper@intel.com
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Backmerging to bring in a needed dependency for the Xe VFIO
driver variant. This should ideally have been done before we
commited that, so we now have a small window in drm-xe-next
where that driver doesn't compile.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202512030331.I8CveRre-lkp@intel.com/
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Skipping power ungate exposed some scenarios that will fail
like below:
```
amdgpu: Register(0) [regVPEC_QUEUE_RESET_REQ] failed to reach value 0x00000000 != 0x00000001n
amdgpu 0000:c1:00.0: amdgpu: VPE queue reset failed
...
amdgpu: [drm] *ERROR* wait_for_completion_timeout timeout!
```
The underlying s2idle issue that prompted this commit is going to
be fixed in BIOS.
This reverts commit 2a6c826cfe.
Fixes: 2a6c826cfe ("drm/amd: Skip power ungate during suspend for VPE")
Cc: stable@vger.kernel.org
Signed-off-by: Mario Limonciello (AMD) <superm1@kernel.org>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reported-by: Konstantin <answer2019@yandex.ru>
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=220812
Reported-by: Matthew Schwartz <matthew.schwartz@linux.dev>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Use common definitions for the fault bits in the IH sourc
data for the gmc9-12 memory hub faults
Reviewed-by: Timur Kristóf <timur.kristof@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
We need to call amdgpu_vm_handle_fault() on page fault
on all gfx9 and newer parts to properly update the
page tables, not just for recoverable page faults.
Cc: stable@vger.kernel.org
Reviewed-by: Timur Kristóf <timur.kristof@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
We need to call amdgpu_vm_handle_fault() on page fault
on all gfx9 and newer parts to properly update the
page tables, not just for recoverable page faults.
Cc: stable@vger.kernel.org
Reviewed-by: Timur Kristóf <timur.kristof@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
mfd_add_hotplug_devices() assigns child platform devices with
PLATFORM_DEVID_AUTO, but the ACP machine drivers expect the platform
device names to never change. Use mfd_add_devices() instead and give
each cell a unique id.
Signed-off-by: Brady Norander <bradynorander@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Otherwise userspace may be fooled into believing it has a reserved VMID
when in reality it doesn't, ultimately leading to GPU hangs when SPM is
used.
Fixes: 80e709ee6e ("drm/amdgpu: add option params to enforce process isolation between graphics and compute")
Cc: stable@vger.kernel.org
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Natalie Vock <natalie.vock@gmx.de>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
On old GPUs, it may be an issue that handling the interrupts from
VM faults is too slow and the interrupt handler (IH) ring may
overflow, which can cause an eventual hang.
Delegate the processing of all VM faults to the soft
IRQ handler ring.
As a result, we spend much less time in the IRQ handler that
interacts with the HW IH ring, which significantly reduces the
chance of hangs/reboots.
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
On old GPUs, it may be an issue that handling the interrupts from
VM faults is too slow and the interrupt handler (IH) ring may
overflow, which can cause an eventual hang.
Delegate the processing of all VM faults to the soft
IRQ handler ring.
As a result, we spend much less time in the IRQ handler that
interacts with the HW IH ring, which significantly reduces the
chance of hangs/reboots.
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
On old GPUs, it may be an issue that handling the interrupts from
VM faults is too slow and the interrupt handler (IH) ring may
overflow, which can cause an eventual hang.
Delegate the processing of all VM faults to the soft
IRQ handler ring.
As a result, we spend much less time in the IRQ handler that
interacts with the HW IH ring, which significantly reduces the
chance of hangs/reboots.
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Call amdgpu_vm_update_fault_cache on GMC v6 similarly to how we
do in GMC v7-v8 so that VM fault info can be used later by
userspace for debugging.
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The VM_CONTEXT1_PROTECTION_FAULT_MCCLIENT register
doesn't exist on GMC v6 so we can't print the MC client as a
string like we do on GMC v7-v8. However, we still print the
mc_id from VM_CONTEXT1_PROTECTION_FAULT_STATUS.
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
We are going to use the soft IRQ handler ring on GMC v8
to process interrupts from VM faults.
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
We are going to use the soft IRQ handler ring on GMC v8
to process interrupts from VM faults.
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
We are going to use the soft IRQ handler ring on GMC v8
to process interrupts from VM faults.
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
We are going to use the soft IRQ handler ring on GMC v7 (CIK)
to process interrupts from VM faults.
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
We are going to use the soft IRQ handler ring on GMC v6 (SI)
to process interrupts from VM faults.
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fix a typo in a comment, change "enviroment" to "environment" in
drivers/gpu/drm/amd/display/dc/dml2/display_mode_core_structs.h
Fixes: e6a8a000cf ("drm/amd/display: Rename dml2 to dml2_0 folder")
Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Aditya Gollamudi <adigollamudi@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Roman Li <roman.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[HOW]
Before enable smart power OLED, we need to call set pipe to let
DMUB get correct ABM config.
Reviewed-by: Robin Chen <robin.chen@amd.com>
Signed-off-by: Ian Chen <ian.chen@amd.com>
Signed-off-by: Roman Li <roman.li@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why&How]
DVI-A & VGA connectors are applicable to DCE ASICs, so move them to
dce110_hwseq.c to block audio sync on SIGNAL_TYPE_RGB for DCE ASICs.
Signed-off-by: Ivan Lipski <ivan.lipski@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Users of ttm entities need to hold the gtt_window_lock before using them
to guarantee proper ordering of jobs.
Cc: stable@vger.kernel.org
Fixes: cb5cc4f573 ("drm/amdgpu: improve debug VRAM access performance using sdma")
Signed-off-by: Pierre-Eric Pelloux-Prayer <pierre-eric.pelloux-prayer@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Switch runtime PM code to use scope-based forcewake for consistency with
other parts of the driver.
Signed-off-by: Raag Jadav <raag.jadav@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patch.msgid.link/20251128082212.294592-1-raag.jadav@intel.com
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
VF migration sends a marker to the GUC before resource fixups begin,
and repeats the marker with the RESFIX_DONE notification. This prevents
the GUC from submitting jobs during double migration events.
To reliably test double migration, a second migration must be triggered
while fixups from the first migration are still in progress. Since fixups
complete quickly, reproducing this scenario is difficult. Introduce
debugfs controls to add delays in the post-fixup phase, creating a
deterministic window for subsequent migrations.
New debugfs entries:
/sys/kernel/debug/dri/BDF/
├── tile0
│ ├─gt0
│ │ ├──vf
│ │ │ ├── resfix_stoppers
resfix_stoppers: Predefined checkpoints that allow the migration process
to pause at specific stages. The stages are given below.
VF_MIGRATION_WAIT_RESFIX_START - BIT(0)
VF_MIGRATION_WAIT_FIXUPS - BIT(1)
VF_MIGRATION_WAIT_RESTART_JOBS - BIT(2)
VF_MIGRATION_WAIT_RESFIX_DONE - BIT(3)
Each state will pause with a 1-second delay per iteration, continuing until
its corresponding bit is cleared.
Signed-off-by: Satyanarayana K V P <satyanarayana.k.v.p@intel.com>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: Tomasz Lis <tomasz.lis@intel.com>
Acked-by: Adam Miszczak <adam.miszczak@linux.intel.com>
Reviewed-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Link: https://patch.msgid.link/20251201095011.21453-10-satyanarayana.k.v.p@intel.com
Handle GuC response `XE_GUC_RESPONSE_VF_MIGRATED` as a special case in the
VF post-migration recovery flow. When this error occurs, it indicates that
a new migration was detected while the resource fixup process was still in
progress. Instead of failing immediately, requeue the VF into the recovery
path to allow proper handling of the new migration event.
This improves robustness of VF recovery in SR-IOV environments where
migrations can overlap with resource fixup steps.
Signed-off-by: Satyanarayana K V P <satyanarayana.k.v.p@intel.com>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: Tomasz Lis <tomasz.lis@intel.com>
Reviewed-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Link: https://patch.msgid.link/20251201095011.21453-9-satyanarayana.k.v.p@intel.com
In scenarios involving double migration, the VF KMD may encounter
situations where it is instructed to re-migrate before having the
opportunity to send RESFIX_DONE for the initial migration. This can occur
when the fix-up for the prior migration is still underway, but the VF KMD
is migrated again.
Consequently, this may lead to the possibility of sending two migration
notifications (i.e., pending fix-up for the first migration and a second
notification for the new migration). Upon receiving the first RES_FIX
notification, the GuC will resume VF submission on the GPU, potentially
resulting in undefined behavior, such as system hangs or crashes.
To avoid this, post migration, a marker is sent to the GUC prior to the
start of resource fixups to indicate start of resource fixups. The same
marker is sent along with RESFIX_DONE notification so that GUC can avoid
submitting jobs to HW in case of double migration.
Signed-off-by: Satyanarayana K V P <satyanarayana.k.v.p@intel.com>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: Tomasz Lis <tomasz.lis@intel.com>
Reviewed-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Link: https://patch.msgid.link/20251201095011.21453-8-satyanarayana.k.v.p@intel.com
