The current code uses a the reset_pipe() local function to reset the
CRTC outputs.
drm_atomic_helper_reset_crtc() has been introduced recently and it
performs exact same operations.
In order to avoid code duplication, use the new helper instead of the
local function.
Signed-off-by: Herve Codina <herve.codina@bootlin.com>
Acked-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Maxime Ripard <mripard@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20250210132620.42263-4-herve.codina@bootlin.com
Signed-off-by: Maxime Ripard <mripard@kernel.org>
drm_atomic_helper_reset_crtc() allows to reset the CRTC active outputs.
This resets all active components available between the CRTC and
connectors.
Signed-off-by: Herve Codina <herve.codina@bootlin.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Maxime Ripard <mripard@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20250210132620.42263-3-herve.codina@bootlin.com
Signed-off-by: Maxime Ripard <mripard@kernel.org>
Both the TI SN65DSI83 and SN65DSI84 bridges have an IRQ pin to signal
errors using interrupt.
This interrupt is not documented in the binding.
Add the missing interrupts property.
Signed-off-by: Herve Codina <herve.codina@bootlin.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Maxime Ripard <mripard@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20250210132620.42263-2-herve.codina@bootlin.com
Signed-off-by: Maxime Ripard <mripard@kernel.org>
If the driver initialization fails, the vkms_exit() function might
access an uninitialized or freed default_config pointer and it might
double free it.
Fix both possible errors by initializing default_config only when the
driver initialization succeeded.
Reported-by: Louis Chauvet <louis.chauvet@bootlin.com>
Closes: https://lore.kernel.org/all/Z5uDHcCmAwiTsGte@louis-chauvet-laptop/
Fixes: 2df7af93fd ("drm/vkms: Add vkms_config type")
Signed-off-by: José Expósito <jose.exposito89@gmail.com>
Reviewed-by: Thomas Zimmermann <tzimmremann@suse.de>
Reviewed-by: Louis Chauvet <louis.chauvet@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250212084912.3196-1-jose.exposito89@gmail.com
Signed-off-by: Louis Chauvet <louis.chauvet@bootlin.com>
The drm_writeback_cleanup_job() function frees "pos" so call
list_del(&pos->list_entry) first to avoid a use after free.
Fixes: 1914ba2b91 ("drm: writeback: Create drmm variants for drm_writeback_connector initialization")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/78abd541-71e9-4b3b-a05d-2c7caf8d5b2f@stanley.mountain
Signed-off-by: Maxime Ripard <mripard@kernel.org>
TDA998x is the HDMI bridge driver, incorporating drm_connector and
optional drm_encoder (created via the component bind API by the TICLDC
and HDLCD drivers). Thus it should be residing together with the other
DRM bridge drivers under drivers/gpu/drm/bridge/.
Acked-by: Neil Armstrong <neil.armstrong@linaro.org>
Acked-by: Liviu Dudau <liviu.dudau@arm.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250113-drm-move-tda998x-v3-3-214e0682a5e4@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Move the driver for NXP TDA9950 / CEC part of TDA998x together to
drivers/media/i2c, close to other CEC drivers. Specify 'default
DRM_I2C_NXP_TDA998X' in order to simplify migration from old config
files as the Kconfig name has been changed to follow media/cec style.
Acked-by: Hans Verkuil <hverkuil@xs4all.nl>
Link: https://patchwork.freedesktop.org/patch/msgid/20250113-drm-move-tda998x-v3-2-214e0682a5e4@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Change the visionox-r66451 panel to use multi style functions for
improved error handling. Additionally, always drop LPM flag after
sending init sequence.
Signed-off-by: Tejas Vipin <tejasvipin76@gmail.com>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20250210092342.287324-1-tejasvipin76@gmail.com
Add Matthew Auld and Matthew Brost as TTM reviewers
Cc: Matthew Auld <matthew.auld@intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: Dave Airlie <airlied@gmail.com>
Cc: Simona Vetter <simona.vetter@ffwll.ch>
Cc: dri-devel@lists.freedesktop.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Acked-by: Matthew Auld <matthew.auld@intel.com>
Acked-by: Nirmoy Das <nirmoy.das@intel.com>
Acked-by: Matthew Brost <matthew.brost@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250206103544.36971-1-thomas.hellstrom@linux.intel.com
Since the initial commit 57692c94dc ("drm/v3d: Introduce a new DRM driver
for Broadcom V3D V3.x+") the struct v3d_dev reserved a pointer for
an optional V3D clock. But there wasn't any code, which fetched it.
So add the missing clock handling before accessing any V3D registers.
Signed-off-by: Stefan Wahren <wahrenst@gmx.net>
Reviewed-by: Maíra Canal <mcanal@igalia.com>
Signed-off-by: Maíra Canal <mcanal@igalia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250201125046.33030-1-wahrenst@gmx.net
drm_sched_init() has a great many parameters and upcoming new
functionality for the scheduler might add even more. Generally, the
great number of parameters reduces readability and has already caused
one missnaming, addressed in:
commit 6f1cacf4eb ("drm/nouveau: Improve variable name in
nouveau_sched_init()").
Introduce a new struct for the scheduler init parameters and port all
users.
Reviewed-by: Liviu Dudau <liviu.dudau@arm.com>
Acked-by: Matthew Brost <matthew.brost@intel.com> # for Xe
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com> # for Panfrost and Panthor
Reviewed-by: Christian Gmeiner <cgmeiner@igalia.com> # for Etnaviv
Reviewed-by: Frank Binns <frank.binns@imgtec.com> # for Imagination
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@igalia.com> # for Sched
Reviewed-by: Maíra Canal <mcanal@igalia.com> # for v3d
Reviewed-by: Danilo Krummrich <dakr@kernel.org>
Reviewed-by: Lizhi Hou <lizhi.hou@amd.com> # for amdxdna
Signed-off-by: Philipp Stanner <phasta@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20250211111422.21235-2-phasta@kernel.org
Ensure drm headers build, are self-contained, have header guards, and
have no kernel-doc warnings, when CONFIG_DRM_HEADER_TEST=y.
The mechanism follows similar patters used in i915, xe, and usr/include.
To cover include/drm, we need to recurse there using the top level
Kbuild and the new include/Kbuild files.
v4: check for CONFIG_WERROR in addition to CONFIG_DRM_WERROR
v3: adapt to upstream build changes
v2: make DRM_HEADER_TEST depend on DRM
Suggested-by: Daniel Vetter <daniel@ffwll.ch>
Cc: David Airlie <airlied@gmail.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Masahiro Yamada <masahiroy@kernel.org>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Simona Vetter <simona.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/d8ad1c6d707f38a55987f616cb9650aef30b84e1.1737556766.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
platform_get_resource_byname() and devm_ioremap_resource() can be
replaced by devm_platform_ioremap_resource_byname(), which can
simplify the code logic a bit, No functional change here.
Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240828084929.2527228-1-ruanjinjie@huawei.com
Convert most mutex_(un)lock calls to use (scoped_)guard instead. This
generally reduces line count and prevents bugs like forgetting to unlock
the mutex. I've left traditional calls in a few places where scoped
helpers would be more verbose. This mostly happens where
debugfs_file_put needs to be called regardless. I looked into defining a
CLASS for debugfs_file, but it seems like more effort than it's worth
since debugfs_file_get can fail.
Signed-off-by: Sean Anderson <sean.anderson@linux.dev>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250207162528.1651426-3-sean.anderson@linux.dev
Instead of attempting the same mutex twice, lock and unlock it.
This bug has been detected by the Clang thread-safety analyzer.
Cc: Sean Anderson <sean.anderson@linux.dev>
Cc: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Fixes: 28edaacb82 ("drm: zynqmp_dp: Add debugfs interface for compliance testing")
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Sean Anderson <sean.anderson@linux.dev>
Signed-off-by: Sean Anderson <sean.anderson@linux.dev>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Sean Anderson <sean.anderson@seco.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250207162528.1651426-2-sean.anderson@linux.dev
The Lenovo Thinkpad T14s Gen6 Snapdragon is currently sold with three
different panel versions: OLED, Low Power IPS or IPS with Touchscreen.
My Low Power IPS version had this panel and the kernel complained
about not knowing any details. I don't have any panel documentation,
but as far as I can see the same timings for the already supported
CSO panel also work for this one.
The raw EDID is:
00 ff ff ff ff ff ff 00 0e 6f 13 14 00 00 00 00
00 1e 01 04 a5 1e 13 78 03 82 53 a4 55 4d 9b 24
0d 51 55 00 00 00 01 01 01 01 01 01 01 01 01 01
01 01 01 01 01 01 35 3c 80 a0 70 b0 23 40 30 20
36 00 2e bd 10 00 00 18 00 00 00 fd 00 30 3c 4a
4a 0f 01 0a 20 20 20 20 20 20 00 00 00 fe 00 43
53 4f 54 20 54 33 0a 20 20 20 20 20 00 00 00 fe
00 4d 4e 45 30 30 37 4a 41 31 2d 32 0a 20 00 8b
Signed-off-by: Sebastian Reichel <sre@kernel.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20250211014314.94429-1-sre@ring0.de
devm_kasprintf() calls can return null pointers on failure.
But some return values were not checked in zynqmp_audio_init().
Add NULL check in zynqmp_audio_init(), avoid referencing null
pointers in the subsequent code.
Fixes: 3ec5c15793 ("drm: xlnx: zynqmp_dpsub: Add DP audio support")
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Charles Han <hanchunchao@inspur.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250211102049.6468-1-hanchunchao@inspur.com
Fix "mapping sg segment longer than device claims to support" warning by
setting the max segment size.
Fixes: d76271d226 ("drm: xlnx: DRM/KMS driver for Xilinx ZynqMP DisplayPort Subsystem")
Reviewed-by: Sean Anderson <sean.anderson@linux.dev>
Tested-by: Sean Anderson <sean.anderson@linux.dev>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250115-xilinx-formats-v2-10-160327ca652a@ideasonboard.com
Look up the mode index for the astdp transmitter ship in the encoder's
atomic check and report an error if the display mode is not supported.
The lookup uses the DRM display mode instead of the driver's internal
VBIOS mode. Both are equivalent. The modesetting code later reads
the calculated index from the connector state to avoid recalculating it.
v2:
- fix typo in commit message (Jocelyn)
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250204133209.403327-4-tzimmermann@suse.de
Programming the astdp transmitter chip requires a magic value for
individual modes. Inline the helper for calculating the value into
its only caller (i.e., the encoder's atomic_mode_set).
With further refactoring, the atomic check will be able to detect
invalid modes before attempting to program them.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250204133209.403327-3-tzimmermann@suse.de
Commit d3d6b1bf85 ("drm: bridge: dw_hdmi: fix preference of RGB modes
over YUV420") changed the order of the output bus formats, but missed to
update accordingly the "Possible output formats" comment section above
dw_hdmi_bridge_atomic_get_output_bus_fmts().
Fix the misleading comment block and a context related typo.
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Robert Foss <rfoss@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20250204-dw-hdmi-bus-fmt-order-v2-1-d0aaeb7a697a@collabora.com
The file uses the panel_bridge APIs from drm_bridge.h, but no drm_panel
APIs from drm_panel.h.
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Robert Foss <rfoss@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20250206-drm-cleanups-v1-8-93df60faa756@bootlin.com
The file uses the panel_bridge APIs from drm_bridge.h, which is included
only indirectly, and uses no drm_panel APIs from drm_panel.h.
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Robert Foss <rfoss@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20250206-drm-cleanups-v1-5-93df60faa756@bootlin.com
The file uses the panel_bridge APIs from drm_bridge.h, but no drm_panel
APIs from drm_panel.h.
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Robert Foss <rfoss@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20250206-drm-cleanups-v1-4-93df60faa756@bootlin.com
'struct drm_device' is not used at all in this file since commit
aa6c43644b ("drm/panel: drop drm_device from drm_panel").
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Robert Foss <rfoss@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20250206-drm-cleanups-v1-1-93df60faa756@bootlin.com
The starry-2082109qfh040022-50e is a 10.95" TFT panel. The MIPI controller
on this panel is the same as the other panels here, so add this panel to
this driver.
Signed-off-by: Langyan Ye <yelangyan@huaqin.corp-partner.google.com>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20250208105326.3850358-4-yelangyan@huaqin.corp-partner.google.com
The kingdisplay-kd110n11-51ie is a 10.95" TFT panel. The MIPI controller
on this panel is the same as the other panels here, so add this panel
to this driver.
Signed-off-by: Langyan Ye <yelangyan@huaqin.corp-partner.google.com>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20250208105326.3850358-3-yelangyan@huaqin.corp-partner.google.com
Add a new compatible for the panels KINGDISPLAY KD110N11-51IE and
STARRY 2082109QFH040022-50E. Both panels use the HX83102 IC, so
add the compatible to the hx83102 bindings file.
Signed-off-by: Langyan Ye <yelangyan@huaqin.corp-partner.google.com>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20250208105326.3850358-2-yelangyan@huaqin.corp-partner.google.com
TTM always uses pin_count and ttm_resource_is_swapped() together to
determine whether a BO is unevictable.
Now use ttm_resource_unevictable() to replace them.
Signed-off-by: Zhaoyu Liu <liuzhaoyu.zackary@bytedance.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250126093256.GA688734@bytedance
Signed-off-by: Christian König <christian.koenig@amd.com>
Add power_profile firmware boot param and set it to 0 by default
which is default FW power profile.
Implement IVPU_TEST_MODE_D0I2_DISABLE which is used for setting
power profile boot param value to 1 which prevents NPU from entering
d0i2 power state.
Reviewed-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Signed-off-by: Karol Wachowski <karol.wachowski@intel.com>
Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250204084622.2422544-7-jacek.lawrynowicz@linux.intel.com
Add IVPU_TEST_MODE_CLK_RELINQ_[DISABLE|ENABLE] that overrides
workaround for disabling clock relinquish for testing purposes.
Reviewed-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Signed-off-by: Karol Wachowski <karol.wachowski@intel.com>
Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250204084622.2422544-6-jacek.lawrynowicz@linux.intel.com
Use ivpu_gem_prime_import() based on drm_gem_prime_import_dev()
for importing buffers, removing optimization for same device
imports. This optimization reused the same ivpu_bo object in multiple
contexts but a single buffer can be MMU-mapped only to a single context.
Each import now creates a new instance of ivpu_bo object that shares
the same sg_table but have separate MMU mappings.
Reviewed-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Signed-off-by: Tomasz Rusinowicz <tomasz.rusinowicz@intel.com>
Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250204084622.2422544-5-jacek.lawrynowicz@linux.intel.com
Add debugfs interface to modify following priority bands properties:
* grace period
* process grace period
* process quantum
This allows for the adjustment of hardware scheduling algorithm parameters
for each existing priority band, facilitating validation and fine-tuning.
Reviewed-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Signed-off-by: Karol Wachowski <karol.wachowski@intel.com>
Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250204084622.2422544-4-jacek.lawrynowicz@linux.intel.com
Increment the runtime PM counter when entering
ivpu_context_abort_work_fn() to prevent the device
from suspending while the function is executing.
Reviewed-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Signed-off-by: Andrzej Kacprowski <Andrzej.Kacprowski@intel.com>
Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250204084622.2422544-3-jacek.lawrynowicz@linux.intel.com
Virtio gpu supports the drm_panic module, which displays a message to
the screen when a kernel panic occurs. It is supported where it has
vmapped shmem BO.
Signed-off-by: Jocelyn Falempe <jfalempe@redhat.com>
Signed-off-by: Ryosuke Yasuoka <ryasuoka@redhat.com>
Tested-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Reviewed-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Signed-off-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250206104300.416014-1-ryasuoka@redhat.com
The csot-pna957qt1-1 is a 10.95" TFT panel. The MIPI controller on this
panel is the same as the other panels here, so add this panel to this
driver.
Signed-off-by: Langyan Ye <yelangyan@huaqin.corp-partner.google.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20250206131300.1295111-4-yelangyan@huaqin.corp-partner.google.com
Add a new compatible for the panel CSOT PNA957QT1-1. This panel uses
HX83102 IC, so add the compatible to the hx83102 binding files.
Signed-off-by: Langyan Ye <yelangyan@huaqin.corp-partner.google.com>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20250206131300.1295111-3-yelangyan@huaqin.corp-partner.google.com
