Adds device tree bindings for SMPro MFD driver found on the Mt.Jade
hardware reference platform with Ampere's Altra Processor family.
The SMpro co-processor on Ampere Altra processor family is to monitor
and report various data included hwmon-related info, RAS errors, and
other miscellaneous information.
Signed-off-by: Quan Nguyen <quan@os.amperecomputing.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Lee Jones <lee@kernel.org>
Link: https://lore.kernel.org/r/20221031024442.2490881-2-quan@os.amperecomputing.com
BCA is a big set / family of Broadcom devices sharing multiple hardware
blocks. One of them is timer that actually exists in two versions. It's
a part of TWD MFD block.
Add binding for it so SoCs can be properly described. Linux (and
probably any other OS) doesn't really seem to need a driver for it. it
may be needed for bootloaders (e.g. U-Boot) though. Especially for SoCs
with CPUs other than Cortex-A9 (which contains arch timers).
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Lee Jones <lee@kernel.org>
Link: https://lore.kernel.org/r/20221028115353.13881-1-zajec5@gmail.com
The PM8018 compatible is always used with PM8921 fallback, so PM8018
compatible can be safely removed from device ID table
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Lee Jones <lee@kernel.org>
Link: https://lore.kernel.org/r/20220928-mdm9615-dt-schema-fixes-v4-8-dac2dfaac703@linaro.org
The PM8018 is used as compatible with PM8921 on the MDM9615, document this situation,
and an example section to validate this change.
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Lee Jones <lee@kernel.org>
Link: https://lore.kernel.org/r/20220928-mdm9615-dt-schema-fixes-v4-5-dac2dfaac703@linaro.org
There are multiple J7 based platforms, and the j721e-system-controller
shouldn't be define in non-j721e devices device trees.
This is mainly for clarity; but also useful in case there are future
erratas that need to be fixed for a specific platform.
Signed-off-by: Matt Ranostay <mranostay@ti.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Lee Jones <lee@kernel.org>
Link: https://lore.kernel.org/r/20221024035405.366208-2-mranostay@ti.com
Add optional power-domains property to avoid the following dt-schema
failures:
tscadc@40200000: 'power-domains' does not match any of the regexes: 'pinctrl-[0-9]+'
Signed-off-by: Matt Ranostay <mranostay@ti.com>
Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Lee Jones <lee@kernel.org>
Link: https://lore.kernel.org/r/20221025080014.403457-1-mranostay@ti.com
The HTC Herald machine was removed, so this driver is no
longer used anywhere.
Cc: Cory Maccarrone <darkstar6262@gmail.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Lee Jones <lee@kernel.org>
Link: https://lore.kernel.org/r/20221019150410.3851944-17-arnd@kernel.org
The ASoC davinci voicecodec support is no longer used after
the removal of the dm3xx SoC platform, so the MFD driver is never
selected.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Signed-off-by: Lee Jones <lee@kernel.org>
Link: https://lore.kernel.org/r/20221019152947.3857217-11-arnd@kernel.org
The DaVinci DM355EVM platform is gone after the removal of all
unused board files, so the MTD device along with its sub-devices
can be removed as well.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Signed-off-by: Lee Jones <lee@kernel.org>
Link: https://lore.kernel.org/r/20221019152947.3857217-7-arnd@kernel.org
Add binding documentation for the MT6357 PMIC.
Signed-off-by: Fabien Parent <fparent@baylibre.com>
Signed-off-by: Alexandre Mergnat <amergnat@baylibre.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Lee Jones <lee@kernel.org>
Link: https://lore.kernel.org/r/20221005-mt6357-support-v3-1-7e0bd7c315b2@baylibre.com
Adds Multi-function devices driver for SMpro co-processor found on the
Mt.Jade hardware reference platform with Ampere's Altra processor family.
Signed-off-by: Quan Nguyen <quan@os.amperecomputing.com>
Signed-off-by: Lee Jones <lee@kernel.org>
Link: https://lore.kernel.org/r/20220929094321.770125-9-quan@os.amperecomputing.com
The PWM node is not a separate device and is expected to be part of parent
SPMI PMIC node, thus it obtains the address space from the parent. One IO
address in "reg" is also not correct description because LPG block maps to
several regions.
Fixes: 3f5117be95 ("dt-bindings: mfd: convert to yaml Qualcomm SPMI PMIC")
Suggested-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Lee Jones <lee@kernel.org>
Link: https://lore.kernel.org/r/20220928000517.228382-2-bryan.odonoghue@linaro.org
As of df04b6242a ("mfd: twl6040: Remove support for legacy (pdata)
mode") the driver no longer references the platform data, so we can drop
its definition, as well as definitions of related structures.
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Lee Jones <lee@kernel.org>
Link: https://lore.kernel.org/r/20220926054421.1546436-5-dmitry.torokhov@gmail.com
The driver is using gpiod API and therefore should include
linux/gpio/consumer.h, not linux/gpio.h. Also, the driver does not use
any of the APIs from of_gpio.h, so we should not be including it.
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Lee Jones <lee@kernel.org>
Link: https://lore.kernel.org/r/20220926054421.1546436-2-dmitry.torokhov@gmail.com
.probe_new() doesn't get the i2c_device_id * parameter, so determine
that explicitly in the probe function.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Signed-off-by: Lee Jones <lee@kernel.org>
Link: https://lore.kernel.org/r/20221118224540.619276-482-uwe@kleine-koenig.org
The probe function doesn't make use of the i2c_device_id * parameter so it
can be trivially converted.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Signed-off-by: Lee Jones <lee@kernel.org>
Link: https://lore.kernel.org/r/20221118224540.619276-481-uwe@kleine-koenig.org
The probe function doesn't make use of the i2c_device_id * parameter so it
can be trivially converted.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Signed-off-by: Lee Jones <lee@kernel.org>
Link: https://lore.kernel.org/r/20221118224540.619276-480-uwe@kleine-koenig.org
.probe_new() doesn't get the i2c_device_id * parameter, so determine
that explicitly in the probe function.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Signed-off-by: Lee Jones <lee@kernel.org>
Link: https://lore.kernel.org/r/20221118224540.619276-479-uwe@kleine-koenig.org
.probe_new() doesn't get the i2c_device_id * parameter, so determine
that explicitly in the probe function.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Lee Jones <lee@kernel.org>
Link: https://lore.kernel.org/r/20221118224540.619276-476-uwe@kleine-koenig.org
.probe_new() doesn't get the i2c_device_id * parameter, so determine
that explicitly in the probe function.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Lee Jones <lee@kernel.org>
Link: https://lore.kernel.org/r/20221118224540.619276-474-uwe@kleine-koenig.org
.probe_new() doesn't get the i2c_device_id * parameter, so determine
that explicitly in the probe function.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Lee Jones <lee@kernel.org>
Link: https://lore.kernel.org/r/20221118224540.619276-468-uwe@kleine-koenig.org
.probe_new() doesn't get the i2c_device_id * parameter, so determine
that explicitly in the probe function.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Lee Jones <lee@kernel.org>
Link: https://lore.kernel.org/r/20221118224540.619276-466-uwe@kleine-koenig.org
.probe_new() doesn't get the i2c_device_id * parameter, so determine
that explicitly in the probe function.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Lee Jones <lee@kernel.org>
Link: https://lore.kernel.org/r/20221118224540.619276-465-uwe@kleine-koenig.org
.probe_new() doesn't get the i2c_device_id * parameter, so determine
that explicitly in the probe function.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Lee Jones <lee@kernel.org>
Link: https://lore.kernel.org/r/20221118224540.619276-462-uwe@kleine-koenig.org
.probe_new() doesn't get the i2c_device_id * parameter, so determine
that explicitly in the probe function.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Lee Jones <lee@kernel.org>
Link: https://lore.kernel.org/r/20221118224540.619276-459-uwe@kleine-koenig.org
.probe_new() doesn't get the i2c_device_id * parameter, so determine
that explicitly in the probe function.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Lee Jones <lee@kernel.org>
Link: https://lore.kernel.org/r/20221118224540.619276-456-uwe@kleine-koenig.org
The probe function doesn't make use of the i2c_device_id * parameter so it
can be trivially converted.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Acked-by: Matti Vaittinen <mazziesaccount@gmail.com>
Signed-off-by: Lee Jones <lee@kernel.org>
Link: https://lore.kernel.org/r/20221118224540.619276-455-uwe@kleine-koenig.org
