dev->msg_port is switched to MSG_PORT_S2D before issuing the S2D SMU
commands but is only restored to MSG_PORT_PMC on the success path. The
early "return -EIO" and "return -ENOMEM" leave the port stuck on
MSG_PORT_S2D, so all subsequent SMU communication - including the s2idle
prepare/restore handlers - is directed at the wrong mailbox.
Consolidate the exit path through a single label so the message port is
always restored.
Fixes: 3d7d407dfb ("platform/x86: amd-pmc: Add support for AMD Spill to DRAM STB feature")
Cc: stable@vger.kernel.org
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://patch.msgid.link/20260721181756.143084-2-mario.limonciello@amd.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Before this change the HSMP data plane runs without any coordination with
driver teardown: open /dev/hsmp fds and hwmon sysfs reads call
hsmp_send_message() while probe and remove bring sockets up and down.
misc_deregister() does not drain already-open fds, so an in-flight message
can race a concurrent unbind and touch a freed socket array or an unmapped
mailbox.
Add the read side of hsmp_sock_rwsem to the data plane. Split the message
send into hsmp_send_message_locked(), which does the bounds check and MMIO
access and asserts the rwsem is held, and hsmp_send_message(), which wraps
it in guard(rwsem_read). Probe and remove hold the rwsem for write, so they
drain in-flight messages and keep new ones out while they tear a socket
down.
The probe-time senders run under the probe write lock and so must not take
the rwsem again: route hsmp_test(), hsmp_cache_proto_ver() and
hsmp_get_tbl_dram_base() through hsmp_send_message_locked() to avoid
recursive locking. A single rwsem therefore covers both the data plane and
the probe/remove handshake, with no separate probe lock:
- acpi.c already holds it for write across probe for the socket-array and
misc-registration handshake, so the mailbox handshake now nests under
that same lock.
- plat.c takes it for write around init_platform_device(). It is not held
across devm_add_action_or_reset() so the release action, which also
takes it for write, cannot deadlock if that registration fails.
Signed-off-by: Muralidhara M K <muralidhara.mk@amd.com>
Link: https://patch.msgid.link/20260723094656.3806028-7-muralidhara.mk@amd.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
The ACPI driver binds one platform device per socket but shares a single
socket array and a single /dev/hsmp misc device across them. Replace the
is_probed flag with state that tracks this shared ownership:
- miscdevice.this_device tells whether /dev/hsmp is registered, so the
misc device is registered on the first socket and torn down last. A
preceding change clears mdev.this_device on deregister so this gate
stays reliable across a re-probe.
- a kref tracks the sockets that share the array. The first probe
initializes it, each further probe takes a reference and every remove
(or probe failure) drops one; the last put runs the release callback.
All get/put happen under hsmp_sock_rwsem held for write, so the counting
is already serialized and kref's atomic is not strictly needed, but kref
gives the clearer get/put interface and a release callback. The shared
socket array is allocated with kcalloc() on the first probe and freed by
the release callback once the last reference is dropped.
hsmp_acpi_sock_release() is the single teardown helper, run from
kref_put(): it deregisters /dev/hsmp if registered, unmaps any
metric-table DRAM, destroys the per-socket mutexes and frees the array.
The remove path and the probe-failure path both reach it through the last
put, so the teardown lives in one place.
Both paths also clear this socket's dev, so a message issued after a
non-final unbind (or to a socket that failed to probe on a multi-socket
system, whose array stays alive and whose remove() is never called) cannot
reach the mailbox that devres is about to unmap.
Two lifetime fixes fall out of the array persisting across a non-final
unbind:
- hsmp_get_tbl_dram_base() iounmap()s any stale metric_tbl_addr before
remapping, so a rebind does not leak one mapping per cycle. It runs
during (re)probe before the metric sysfs attribute is exposed, so no
reader can be using the old mapping.
- The ACPI path registers /dev/hsmp unparented by passing NULL to
hsmp_misc_register(). Its per-socket devices can be unbound individually
and out of order and the misc device outlives all but the last of them,
so parenting it to one socket's device would leave a dangling parent.
hsmp_misc_register() now takes the parent from its caller, so the
platform driver keeps parenting /dev/hsmp to its single device.
hsmp_sock_rwsem is held for write across probe and remove, so the release
and probe-failure cleanup run with it already held; an upcoming change adds
its read side so the same lock also drains the data plane.
Signed-off-by: Muralidhara M K <muralidhara.mk@amd.com>
Link: https://patch.msgid.link/20260723094656.3806028-6-muralidhara.mk@amd.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
misc_deregister() destroys the device but leaves miscdevice.this_device
pointing at the freed struct device. Clear it so any later check of
this_device, and a subsequent re-register, does not observe a stale
pointer. An upcoming change uses this_device to track whether /dev/hsmp is
registered across the shared ACPI sockets and relies on it being NULL after
deregister.
Signed-off-by: Muralidhara M K <muralidhara.mk@amd.com>
Link: https://patch.msgid.link/20260723094656.3806028-5-muralidhara.mk@amd.com
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
HSMP_GET_METRIC_TABLE makes the firmware refill a shared per-socket metric
DRAM region, which hsmp_metric_tbl_read() then copies out with
memcpy_fromio(). Two concurrent readers of the metrics_bin sysfs attribute
on the same socket can race: one can trigger a fresh fill while the other
is mid-copy and return a torn snapshot. (The hwmon path does not touch
this region; it only issues power messages via hsmp_send_message().)
Embed a struct mutex metric_read_lock in each hsmp_socket and hold it
across the fill-and-copy in hsmp_metric_tbl_read(). Add
hsmp_init_metric_read_locks() and hsmp_destroy_metric_read_locks(), which
take only struct hsmp_plat_device and iterate pdev->sock[] over
pdev->num_sockets so the caller cannot pass a count that disagrees with the
array.
Wire them into both front-ends' probe and teardown paths so the mutex is
always initialized before metrics_bin is exposed: the platform driver and
the ACPI driver both drive hsmp_metric_tbl_read() through the same 0444
metrics_bin attribute. Doing this in one patch avoids a bisection point
where an ACPI read would lock an uninitialized mutex.
Signed-off-by: Muralidhara M K <muralidhara.mk@amd.com>
Link: https://patch.msgid.link/20260723094656.3806028-4-muralidhara.mk@amd.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
The metric-table DRAM region is mapped with devm_ioremap(), which ties the
mapping to the socket device's devres scope. An upcoming change lets the
ACPI front-end share the socket array across sockets and run its own
coordinated teardown, so the mapping can no longer be pinned to a single
per-socket devres scope.
Map it with plain ioremap() instead and add hsmp_unmap_metric_tbls(), which
drops every socket's metric_tbl_addr mapping. The platform driver registers
that helper with devm_add_action_or_reset() so the mappings are released on
both remove and probe failure, while the socket array itself stays
devm-managed.
Signed-off-by: Muralidhara M K <muralidhara.mk@amd.com>
Link: https://patch.msgid.link/20260723094656.3806028-3-muralidhara.mk@amd.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Add hsmp_sock_rwsem and export it, then hold it for write across ACPI
probe, remove and init_acpi() so concurrent per-socket platform probes
cannot race the is_probed handshake or the one-time socket-array
allocation. Use lockdep_assert_held_write() in init_acpi() to catch
incorrect locking under lockdep.
An rw_semaphore is used rather than a plain mutex because an upcoming
change adds a read side so data-plane messages run concurrently with each
other while probe/remove hold it for write to drain in-flight messages.
Introducing it as an rwsem now keeps the lock type stable across that
change.
Signed-off-by: Muralidhara M K <muralidhara.mk@amd.com>
Link: https://patch.msgid.link/20260723094656.3806028-2-muralidhara.mk@amd.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
There are two drivers in the ideapad-laptop module: a wmi_driver and a
platform_driver. The former is registered before the latter, but the
unregistration order is the same as the init one instead of the reverse.
Fix the driver unregistration order by reversing it.
Suggested-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Reviewed-by: Mark Pearson <mpearson-lenovo@squebb.ca>
Signed-off-by: Rong Zhang <i@rong.moe>
Link: https://patch.msgid.link/20260723-ideapad-rev-exit-v2-1-9c31159022de@rong.moe
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Sashiko reports a possible information leak that can occur as follows:
1. In parse_package(), memory allocated for data->device_mode_info is not
zerozed initially as it is allocated with devm_kmalloc_array().
2. In the for loop after the allocation, a malformed ACPI package
provided by firmware can cause some fields in data->device_mode_info
to remain uninitialized.
3. Later in update_sar_data(), the uninitialized fields gets copied to
the fields of context->sar_data, which can be exposed to userspace
through sysfs attribute read (intc_data_show()).
Fix the leak by switching to use devm_kcalloc() for allocation.
Reported-by: Sashiko <sashiko-bot@kernel.org>
Closes: https://sashiko.dev/#/patchset/20260710052806.100107-1-nihaal%40cse.iitm.ac.in
Signed-off-by: Abdun Nihaal <nihaal@cse.iitm.ac.in>
Link: https://patch.msgid.link/20260723-platx86-v4-2-93b4a178b595@cse.iitm.ac.in
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
The memory allocated for device_mode_info in parse_package() called by
sar_get_data() is not freed in some of the error paths in sar_probe().
Fix that by converting to use device managed allocations.
Fixes: dcfbd31ef4 ("platform/x86: BIOS SAR driver for Intel M.2 Modem")
Cc: stable@vger.kernel.org
Signed-off-by: Abdun Nihaal <nihaal@cse.iitm.ac.in>
Link: https://patch.msgid.link/20260723-platx86-v4-1-93b4a178b595@cse.iitm.ac.in
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Add support for querying and switching the graphics MUX mode on HP
systems via WMI. This introduces the 'gpu_mux_mode' sysfs attribute
under the hp-wmi platform device, allowing userspace tools to check
and safely switch between available graphics modes (e.g., UMA, Hybrid,
Discrete).
The hardware capabilities mask is primarily read using the modern
128-byte System Design Data query. However, to ensure backward
compatibility with older models, a fallback mechanism is implemented.
By mirroring the behavior of the Windows Omen Gaming Hub software, if
the modern query fails but the MUX WMI endpoint (0x52) responds
successfully to a read request, the driver defaults to a standard
Hybrid + Discrete support mask (0x06).
Signed-off-by: Kürşat Abaylı <hello@kursatabayli.dev>
Link: https://patch.msgid.link/20260723172734.18361-1-hello@kursatabayli.dev
[ij: add kstrtox.h]
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
WMI_gaming_execute_u32_u64() returns success when firmware supplies
no output object, leaving the caller output untouched. Gaming getters
then inspect an uninitialized result value.
When the caller requests an output value, return -ENOMSG if firmware
supplies no object. Preserve a NULL output pointer as the supported way
for callers to ignore the result.
Fixes: 2d76708c22 ("platform/x86: acer-wmi: use WMI calls for platform profile handling")
Signed-off-by: Yousef Alhouseen <alhouseenyousef@gmail.com>
Link: https://patch.msgid.link/20260701164208.8998-1-alhouseenyousef@gmail.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
pmc_core_pmt_get_lpm_req() returns the last telemetry read status. When
firmware exposes no enabled low-power modes, the loop does not run
and the function returns an uninitialized stack value.
Initialize the status to success so an empty mode set is handled
deterministically.
Signed-off-by: Yousef Alhouseen <alhouseenyousef@gmail.com>
Reviewed-by: David E. Box <david.e.box@linux.intel.com>
Link: https://patch.msgid.link/20260630105101.54016-1-alhouseenyousef@gmail.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Add 2 of the new feature defines, UNIWILL_FEATURE_AC_AUTO_BOOT and
UNIWILL_FEATURE_USB_POWERSHARE, to TUXEDO devices where applicable.
Signed-off-by: Werner Sembach <wse@tuxedocomputers.com>
Link: https://patch.msgid.link/20260708211950.568799-1-wse@tuxedocomputers.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
The ThinkPad T14 Gen 2 AMD was sold under two machine types, 20XK and
20XL, but only 20XK has been in the s2idle quirk list since the quirk
was introduced in commit 455cd867b8 ("platform/x86: thinkpad_acpi:
Add a s2idle resume quirk for a number of laptops").
On 20XL machines the firmware SMI handler therefore still runs on the
NVMe D3->D0 transition when exiting suspend-to-idle. With IOMMU
translation enabled (the default), this intermittently stalls resume
for ~10.25 seconds: seven devices across three root ports (nvme, both
xhci_hcd functions, xhci-pci-renesas, snd_hda_intel x2, snd_rn_pci_acp3x)
block in pci_pm_resume_noirq and are released simultaneously, consistent
with all cores being held in SMM.
Add the missing 20XL machine type, mirroring the existing 20XK entry.
This is the same class of omission fixed by commit 9a469c6dfa
("platform/x86: thinkpad_acpi: Add missing T14s Gen1 type to s2idle
quirk list").
Verified on a ThinkPad T14 Gen 2a (type 20XLS41C00, BIOS R1MET62W 1.32,
kernel 6.12.95): with this entry the quirk message appears at probe and
a 14-hour suspend resumes in ~1s with no noirq stalls, where previously
even short suspends could hit the ~10s delay. A further two-day soak
(short naps and two ~14-hour suspends) showed every resume clean.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=221755
Signed-off-by: Yap Weei Choong <ywc8891@gmail.com>
Tested-by: Yap Weei Choong <ywc8891@gmail.com>
Reviewed-by: Mario Limonciello (AMD) <superm1@kernel.org>
Link: https://patch.msgid.link/20260717060744.1252065-2-ywc8891@gmail.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
The dedicated "ProArt" key on the ASUS ProArt PX13 (HN7306) emits ASUS
WMI event code 0x8b. This code is absent from the asus-nb-wmi sparse
keymap, so pressing the key only produces a "Unknown key code 0x8b"
message and does nothing in userspace.
On this model the key is exposed solely through the WMI interface and has
no HID scancode, so it can only be handled inside asus-nb-wmi. Map 0x8b
to KEY_PROG3 so the key emits a bindable event, consistent with the
existing KEY_PROG3 mapping used for the ASUS programmable/Armoury key.
Signed-off-by: Nizar Al-Kabbani <nizar.m.kabbani@gmail.com>
Reviewed-by: Denis Benato <denis.benato@linux.dev>
Link: https://patch.msgid.link/20260719090843.66777-1-nizar.m.kabbani@gmail.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Having a ad-hoc device whitelist inside uniwill_kbd_led_init()
to work around unreliable KBD_WHITE_ONLY values conflicts with
the idea of the device descriptor infrastructure.
Remove the ad-hoc device whitelist and use the device descriptor
infrastructure instead.
Suggested-by: Werner Sembach <wse@tuxedocomputers.com>
Reviewed-by: Werner Sembach <wse@tuxedocomputers.com>
Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Link: https://patch.msgid.link/20260720132611.374073-3-W_Armin@gmx.de
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
The function uniwill_kbd_led_init() is quite large and doing multiple
things at once:
- general hardware initialisation
- single color keyboard backlight registration
- RGB keyboard backlight registration
Move the last two things into separate functions to increase the
maintainability of uniwill_kbd_led_init().
Suggested-by: Werner Sembach <wse@tuxedocomputers.com>
Reviewed-by: Werner Sembach <wse@tuxedocomputers.com>
Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Link: https://patch.msgid.link/20260720132611.374073-2-W_Armin@gmx.de
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
On systems where the USCS ACPI method is absent, acpi_evalf() returns
AE_NOT_FOUND which maps to -EIO. This caused tpacpi_usbc_security_init()
to propagate the error and thinkpad_acpi failed to probe entirely on
unsupported platforms.
Fix this by checking for USCS method presence with acpi_has_method() before
attempting to call it, returning -ENODEV immediately if absent.
This follows the same pattern used by other subdrivers in thinkpad_acpi.c.
Fixes: 67e8d1e9cacd ("platform/x86: thinkpad_acpi: Add USB-C Security (USCS) support")
Reported-by: Oliver Lin <oliver@liuxiaozhen.dev>
Closes: https://lore.kernel.org/platform-driver-x86/239c8162-e1e6-4b49-8292-35547c5a525c@liuxiaozhen.dev/
Tested-by: Oliver Lin <oliver@liuxiaozhen.dev>
Signed-off-by: Vishnu Sankar <vishnuocv@gmail.com>
Link: https://patch.msgid.link/20260715010205.514132-1-vishnuocv@gmail.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Since every platform driver can be forced to match a device that doesn't
match its list of device IDs because of device_match_driver_override(),
platform drivers that rely on the existence of a device's ACPI companion
object should verify its presence.
san_probe() dereferences the result of ACPI_COMPANION() when installing
the GSBUS address space handler, so force-binding the driver to a device
without an ACPI companion leads to a NULL pointer dereference. The
dereference was introduced when the probe function was switched from
ACPI_HANDLE() to ACPI_COMPANION().
Check the ACPI companion against NULL and return -ENODEV when it is
missing, like commit e4865a56d0 ("ACPI: driver: Check ACPI_COMPANION()
against NULL during probe") does for the core ACPI platform drivers.
Fixes: a9e10e5873 ("ACPI: scan: Extend acpi_walk_dep_device_list()")
Signed-off-by: Linmao Li <lilinmao@kylinos.cn>
Link: https://patch.msgid.link/20260706012512.524359-2-lilinmao@kylinos.cn
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Every platform driver can be forced to match a device that doesn't match
its list of device IDs because of device_match_driver_override(), so
platform drivers that rely on the existence of a device's ACPI companion
object need to verify its presence.
mlxbf_pmc_probe() passes the result of ACPI_COMPANION() to
acpi_device_hid(), which dereferences it, so force-binding the driver to
a device without an ACPI companion leads to a NULL pointer dereference.
Accordingly, add a requisite ACPI_COMPANION() check against NULL to the
mlxbf-pmc driver and return -ENODEV when the companion is missing.
Fixes: 1a218d312e ("platform/mellanox: mlxbf-pmc: Add Mellanox BlueField PMC driver")
Signed-off-by: Linmao Li <lilinmao@kylinos.cn>
Link: https://patch.msgid.link/20260706012056.524096-1-lilinmao@kylinos.cn
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
During driver initialization in asus_wmi_add(), various subsystems are
registered sequentially. However, the error path labels are out of order
relative to the registration sequence.
Specifically:
1. If asus_wmi_custom_fan_curve_init() fails, the driver jumps to
fail_custom_fan_curve. Because this label is placed below fail_sysfs,
it bypasses the cleanup calls for the input device and sysfs groups,
which were successfully registered before, leaking those resources.
2. If asus_screenpad_init() fails, the driver jumps to fail_screenpad.
Because fail_screenpad is placed below fail_backlight, it bypasses the
cleanup calls for backlight and rfkill, leaking those resources.
Fix these resource leaks by reordering the error path labels in
asus_wmi_add() to match the exact reverse order of the resource
allocations.
Fixes: 0f0ac158d2 ("platform/x86: asus-wmi: Add support for custom fan curves")
Fixes: 2c97d3e55b ("platform/x86: asus-wmi: add support for ASUS screenpad")
Assisted-by: Antigravity:gemini-3.5-flash
Signed-off-by: Marco Scardovi <scardracs@disroot.org>
Link: https://patch.msgid.link/20260617155104.10111-1-scardracs@disroot.org
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Add a Documentation/ABI/testing entry describing the AMD PMF util layer
character device (/dev/amdpmf_interface) and the initial ioctl used to
query feature support and metrics data information. This interface is
available when CONFIG_AMD_PMF_UTIL_SUPPORT=y.
Also update the MAINTAINERS record with the new UAPI header.
Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Link: https://patch.msgid.link/20260609081044.2416731-8-Shyam-sundar.S-k@amd.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
This tool leverages amd-pmf ioctls exposed via the util layer, allowing
validation of its newly integrated util layer and /dev/amdpmf_interface.
It includes a user-space test application, test_amd_pmf, designed to
interact with the PMF driver and retrieve relevant metrics for the
testing and analysis.
It provides definitions for test metrics, feature IDs, and device states,
and includes tests for various AMD PMF metrics such as power source, skin
temperature, battery state, and custom BIOS inputs/outputs. It also
enables the testing of PMF metrics data and feature support reporting.
Co-developed-by: Sanket Goswami <Sanket.Goswami@amd.com>
Signed-off-by: Sanket Goswami <Sanket.Goswami@amd.com>
Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Link: https://patch.msgid.link/20260609081044.2416731-7-Shyam-sundar.S-k@amd.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Implement the ioctl handler for the util layer character device. This
support adds the actual functionality to populate PMF metrics from the
TA shared memory buffer and return them to userspace.
The implementation includes:
- amd_pmf_populate_data() to extract metrics from TA shared memory
- amd_pmf_set_ioctl() to handle userspace ioctl requests
- Size negotiation for forward/backward compatibility
- Feature-based population of struct fields
- Export amd_pmf_get_ta_custom_bios_inputs()
Co-developed-by: Sanket Goswami <Sanket.Goswami@amd.com>
Signed-off-by: Sanket Goswami <Sanket.Goswami@amd.com>
Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Link: https://patch.msgid.link/20260609081044.2416731-6-Shyam-sundar.S-k@amd.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
These debug helper functions convert enumerated values to appropriate
message and can be useful for userspace tools and other kernel components
that need to interpret AMD PMF state values.
By making them inline functions in the UAPI header, they become available
to both kernel and userspace without code duplication. Also, prefix the
function names with amd_pmf_.
Also, include a case to cover unused enum entries.
Co-developed-by: Sanket Goswami <Sanket.Goswami@amd.com>
Signed-off-by: Sanket Goswami <Sanket.Goswami@amd.com>
Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Link: https://patch.msgid.link/20260609081044.2416731-5-Shyam-sundar.S-k@amd.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Relocate commonly used enums from multiple source files into a shared
header file to simplify code structure, improve readability, and
enhance maintainability. Also, remove the initialization of the first
enum member, since it is not needed.
Add the AMD_PMF_ prefix to the laptop_placement and platform_type enums
since these names are overly generic for inclusion in a UAPI header
Co-developed-by: Sanket Goswami <Sanket.Goswami@amd.com>
Signed-off-by: Sanket Goswami <Sanket.Goswami@amd.com>
Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Link: https://patch.msgid.link/20260609081044.2416731-4-Shyam-sundar.S-k@amd.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Add a bios_output[] to amd_pmf_dev struct and store the latest values for
BIOS output policies when applying PMF policies. This enables the AMD PMF
util layer to expose these BIOS outputs alongside selected thermal and
power metrics to user space via /dev/amdpmf_interface and a new IOCTL,
supporting real-time monitoring tools such as SystemDeck.
Co-developed-by: Sanket Goswami <Sanket.Goswami@amd.com>
Signed-off-by: Sanket Goswami <Sanket.Goswami@amd.com>
Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Link: https://patch.msgid.link/20260609081044.2416731-3-Shyam-sundar.S-k@amd.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Add a util layer to AMD PMF that exposes a minimal userspace interface
via a character device for metrics monitoring and feature discovery.
This creates /dev/amdpmf_interface with basic ioctl support to retrieve
PMF metrics such as:
* Power source and power slider position
* Platform type, lid state, and user presence
* Skin temperature and ambient light
* BIOS input parameters (1-10)
* Graphics workload metrics
* CPU C-state residency (average and maximum)
* Socket power consumption
* Auto Mode: Automatic power profile switching based on system activity
* Static Power Slider: User-selectable power profiles
* Policy Builder (Smart PC): Action based policy management
* Dynamic Power Slider AC: Adaptive power profiles when on AC power
* Dynamic Power Slider DC: Adaptive power profiles when on battery
The interface enables smoother integration with userspace tools such as
AMD SystemDeck [1], which is widely used for monitoring and controlling
power and thermal behavior on AMD platforms. These tools help designers
keep major components within thermal limits to ensure proper operation
and enhance overall system stability and reliability.
The feature is gated behind the CONFIG_AMD_PMF_UTIL_SUPPORT Kconfig
option, allowing it to be disabled if not needed. The implementation
uses existing PMF infrastructure to populate data from the TA (Trusted
Application) shared memory buffer.
Link: https://docs.amd.com/v/u/en-US/68773_0.50 [1]
Co-developed-by: Sanket Goswami <Sanket.Goswami@amd.com>
Signed-off-by: Sanket Goswami <Sanket.Goswami@amd.com>
Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Link: https://patch.msgid.link/20260609081044.2416731-2-Shyam-sundar.S-k@amd.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Every platform driver can be forced to match a device that does not match
its list of device IDs because of device_match_driver_override(), so
platform drivers that rely on the existence of a device ACPI companion
object need to verify its presence.
asus_wireless_probe() returns success when acpi_match_acpi_device()
finds no match, leaving behind an input device that never reports
anything because the notify handler is not installed. Worse, when the
driver is force-bound to a device without an ACPI companion, probe
still succeeds and stores a NULL companion pointer, which
asus_wireless_remove() later passes to acpi_dev_remove_notify_handler(),
leading to a NULL pointer dereference on unbind.
Return -ENODEV when the device does not match the ID table. This also
covers the missing-companion case, because acpi_match_acpi_device()
rejects a NULL device. Perform the check before allocating any driver
state, instead of after the input device has already been registered.
Fixes: f7e648027d ("platform/x86: asus-wireless: Convert ACPI driver to a platform one")
Suggested-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Linmao Li <lilinmao@kylinos.cn>
Link: https://patch.msgid.link/20260710094355.186143-1-lilinmao@kylinos.cn
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
The Halo Box features an RGB LED light bar that can be controlled
through WMI methods to display any color combination.
The driver exposes the LED through the LED multicolor subsystem,
allowing userspace to control RGB values via sysfs:
/sys/class/leds/amd_halo:multicolor:status/multi_intensity
/sys/class/leds/amd_halo:multicolor:status/brightness
Hardware interface:
- Three separate RGB channels (Red, Green, Blue)
- All 3 channels are configured at once with a single WMI method call
- Value range: 0-100 (matching hardware range directly)
Co-developed-by: Mario Limonciello (AMD) <superm1@kernel.org>
Signed-off-by: Mario Limonciello (AMD) <superm1@kernel.org>
Reviewed-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Reviewed-by: Armin Wolf <W_Armin@gmx.de>
Signed-off-by: Yo-Jung Leo Lin (AMD) <Leo.Lin@amd.com>
Link: https://patch.msgid.link/20260709-halo-leds-v2-plus-v8-1-b34c64277193@amd.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
hp_populate_enumeration_elements_from_package() returns -EIO and aborts
enumeration of the entire attribute when any single element has an
unexpected ACPI type. This is observed on HP EliteBook 840 G2 when the
BIOS returns malformed ACPI data following a failed WMI query:
ACPI BIOS Error (bug): AE_AML_BUFFER_LIMIT, Index (0x000000032)
is beyond end of object (length 0x32)
ACPI Error: Aborting method \_SB.WMID.WQBE due to previous error
Error expected type 2 for elem 13, but got type 1 instead
hp_bioscfg: Returned error 0x3,
"Invalid command value/Feature not supported"
Aborting immediately discards the attribute entirely.
Warn about the unexpected element type, free the temporary string, skip
the offending element, and continue parsing the remaining package
instead of failing the whole attribute.
Fixes: a34fc329b1 ("platform/x86: hp-bioscfg: bioscfg")
Cc: stable@vger.kernel.org
Signed-off-by: Muhammad Bilal <meatuni001@gmail.com>
Reviewed-by: Mario Limonciello (AMD) <superm1@kernel.org>
Link: https://patch.msgid.link/20260709165900.30615-5-meatuni001@gmail.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
hp_init_bios_package_attribute() hard-fails when a WMI ACPI package
contains fewer elements than the type-specific expected count (e.g. 11
elements instead of 13 for INTEGER or ENUMERATION attributes). This
causes the entire hp_bioscfg driver to skip attribute enumeration on
older HP hardware whose BIOS returns shortened packages when optional
fields like prerequisites or possible values are absent.
Observed on HP EliteBook 840 G2 (BIOS M71 Ver. 01.31):
hp_bioscfg: ACPI-package does not have enough elements: 11 < 13
The element layout has two tiers:
- Elements 0-9 (SECURITY_LEVEL+1 = 10): common to all attribute types
- Elements 10-N: type-specific (bounds, values, encodings, ...)
The per-type populate functions (hp_populate_*_elements_from_package)
already handle sparse packages correctly via their own elem < count
loop guards and inner-loop bounds checks. The only unsafe case is when
we lack even the common elements needed to register the attribute.
Fix by introducing COMMON_ELEM_CNT to mark the hard minimum (10), and
splitting the check into two tiers:
- Fewer than COMMON_ELEM_CNT elements: hard fail, can't proceed.
- Fewer than expected type-specific elements: warn, but let the
populate function parse what is available.
Fixes: a34fc329b1 ("platform/x86: hp-bioscfg: bioscfg")
Cc: stable@vger.kernel.org
Signed-off-by: Muhammad Bilal <meatuni001@gmail.com>
Reviewed-by: Mario Limonciello (AMD) <superm1@kernel.org>
Link: https://patch.msgid.link/20260709165900.30615-4-meatuni001@gmail.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
hp_populate_ordered_list_elements_from_package() differs from the other
per-type parsers: its main loop is bounded only by the fixed per-type
count and never checks elem against the number of elements actually
present in the package,
for (elem = 1, eloc = 1; eloc < ORD_ELEM_CNT; elem++, eloc++)
whereas the string, integer, enumeration and password parsers bound
their main loop with "elem < count" as well.
This is safe today because hp_init_bios_package_attribute() rejects any
package with fewer than ORD_ELEM_CNT elements before the parser runs.
An upcoming change, however, relaxes that check to accept shorter
packages.
Bound the loop by the validated element count as well, so it stops at
whichever comes first, the per-type count or the real package size,
for (elem = 1, eloc = 1; eloc < ORD_ELEM_CNT && elem < order_obj_count;
elem++, eloc++)
order_obj_count is the validated element count, now correctly forwarded
from the caller. No functional change for packages that enumerate
correctly today.
Cc: stable@vger.kernel.org
Signed-off-by: Muhammad Bilal <meatuni001@gmail.com>
Link: https://patch.msgid.link/20260709165900.30615-3-meatuni001@gmail.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
The per-type package parsers are handed the wrong element count.
hp_init_bios_package_attribute() validates obj->package.count and then
calls one of the five hp_populate_*_package_data() wrappers (string,
integer, enumeration, ordered list, password). Each wrapper forwards a
count to its hp_populate_*_elements_from_package() parser, but instead
of forwarding the validated obj->package.count it derives the count
from elements[0]. elements[0] is the NAME field and is always an
ACPI_TYPE_STRING, so reading ->package.count from it in fact reads
->string.length through the union acpi_object. The parsers thus bound
themselves against the length of the name string rather than against
the real number of elements in the package.
This is safe today because hp_init_bios_package_attribute() refuses any
package that has fewer than the type's element count, so a parser only
ever runs on a full package and never reads past it regardless of the
bogus bound.
An upcoming change relaxes that check to accept shorter packages. Once
a parser can receive fewer elements than its per-type count, a bound
taken from the name length no longer reflects the array size, and the
"elem < count" loop conditions and "elem + n >= count" sub-loop guards
read past the end of elements[] - an out-of-bounds heap read.
Forward the validated obj->package.count to every *_package_data()
wrapper so the parsers bound themselves against the real package size.
This does not change behaviour for the packages that enumerate
correctly today and is a prerequisite for accepting shorter packages
safely.
Cc: stable@vger.kernel.org
Signed-off-by: Muhammad Bilal <meatuni001@gmail.com>
Link: https://patch.msgid.link/20260709165900.30615-2-meatuni001@gmail.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
ecl_ishtp_cl_probe() acquires a reference to an ACPI device via
acpi_find_eclite_device() but fails to release it in the error path
when acpi_opregion_init() fails. This results in a reference count
leak, preventing proper cleanup of the ACPI device.
Calling path: acpi_find_eclite_device() ->
acpi_dev_get_first_match_dev() -> acpi_dev_get_next_match_dev() ->
bus_find_device() -> get_device().
Found by code review.
Signed-off-by: Ma Ke <make_ruc2021@163.com>
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Cc: stable@vger.kernel.org
Fixes: 7b6bf51de9 ("platform/x86: Add Intel ishtp eclite driver")
Link: https://patch.msgid.link/20260624014910.1226446-1-make_ruc2021@163.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
The driver sets acpi_device_name() and acpi_device_class() which are
never read afterward, so make it stop doing that and drop the symbols
defined specifically for this purpose.
No intentional functional impact.
This will facilitate the removal of device_name and device_class from
struct acpi_device_pnp in the future.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://patch.msgid.link/2866696.mvXUDI8C0e@rafael.j.wysocki
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
The driver sets acpi_device_name() and acpi_device_class() which are
never read afterward, so make it stop doing that.
No intentional functional impact.
This will facilitate the removal of device_name and device_class from
struct acpi_device_pnp in the future.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://patch.msgid.link/3447860.aeNJFYEL58@rafael.j.wysocki
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
The driver sets acpi_device_name() to initialize an input class device
name initialization and print a message on probe success, but the input
class device name can be set directly to the "Surface Pro 3/4 Buttons"
string literal and used for printing the message.
Make the driver do so, stop setting acpi_device_name() in it and drop
the symbol specifically defined for this purpose.
No intentional functional impact.
This will facilitate the removal of device_name from struct
acpi_device_pnp in the future.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Chen Yu <yu.c.chen@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://patch.msgid.link/12927239.O9o76ZdvQC@rafael.j.wysocki
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Currently, manual fan control on supported HP models uses a single
PWM value for both CPU and GPU fans, linking their speeds via a hardcoded
gpu_delta offset. This prevents userspace tools from managing the thermal
profiles of the CPU and GPU independently.
Refactor the hwmon implementation to support independent dual-channel
PWM control:
- Split the single 'pwm' state into 'cpu_pwm' and 'gpu_pwm'.
- Expose a second PWM channel ('pwm2') to userspace via hwmon_channel_info.
- Remove the gpu_delta mechanism entirely.
The 'pwm1_enable' mode remains shared, as the underlying hardware does
not support per-fan modes. When switching to manual mode, both fans are
smoothly initialized to their current RPMs. Additionally, ensure that
the HP_FAN_SPEED_AUTOMATIC flag is isolated from rpm_to_pwm mathematical
interpolations during mode resets to prevent unintended fan states.
Tested on: HP Victus 16-s0xxx
Tested-by: Radhey Kalra <radheykalra901@gmail.com>
Signed-off-by: Kürşat Abaylı <hello@kursatabayli.dev>
Link: https://patch.msgid.link/20260707203740.55369-1-hello@kursatabayli.dev
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Convert init_rog_tunables() to use the cleanup infrastructure to
automatically free ac_rog_tunables if dc_rog_tunables allocation fails.
By declaring local pointers with the __free(kfree) attribute, the
manual kfree() in the error path can be removed. Upon successful
initialization, the ownership is transferred to the global struct
using no_free_ptr().
Assisted-by: Antigravity:gemini-3.5-flash
Signed-off-by: Marco Scardovi <scardracs@disroot.org>
Link: https://patch.msgid.link/20260707213741.6515-3-scardracs@disroot.org
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
In init_rog_tunables(), if dc_limits are defined and allocating
dc_rog_tunables fails, the already allocated ac_rog_tunables gets
freed but the pointer stored in
asus_armoury.rog_tunables[ASUS_ROG_TUNABLE_AC] is not cleared. Since
init_rog_tunables() returns void, the driver initialization continues,
which can lead to a Use-After-Free (UAF) when asus_fw_attr_add()
accesses the freed AC tunables pointer.
Additionally, if init_rog_tunables() succeeds but asus_fw_attr_add()
fails, the allocated tunables are not freed, resulting in a memory leak.
Fix these issues by making init_rog_tunables() return an error code and
propagating it in asus_fw_init(). Defer setting the global pointers in
asus_armoury.rog_tunables until both tunables have been successfully
allocated. If asus_fw_attr_add() fails, release the allocated resources
using a standard goto rollback block in asus_fw_init().
Assisted-by: Antigravity:gemini-3.5-flash
Signed-off-by: Marco Scardovi <scardracs@disroot.org>
Link: https://patch.msgid.link/20260707213741.6515-2-scardracs@disroot.org
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
On the LG Gram 16T90SP, the ACPI firmware will only accept the values
0x80, 0xA2 and 0xA4 when setting the keyboard backlight. After a bit
of research using ACPI tables from older models it seems that bit 8
is supposed to be always written as 1.
Fix the keyboard backlight support on this model by always setting
bit 8 inside the argument passed to the WMAB ACPI control method.
Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Link: https://patch.msgid.link/20260708195553.7762-6-W_Armin@gmx.de
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
The WMAB ACPI control method can return two kinds of results:
1. A ACPI integer containing the result.
2. A ACPI buffer containing the result and an error code.
Devices implement one of those mechanisms, but not both. Extend
lg_wmab() to abstract away the differences between both mechanisms
to fix keyboard backlight support on newer devices.
Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Link: https://patch.msgid.link/20260708195553.7762-5-W_Armin@gmx.de
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
LG devices support two interfaces for receiving events:
- the WMI-based interface currently being used by the driver
- a ACPI-based interface similar to the WMI-based interface
Older devices use the WMI-based interface by default and need
to be manually switched into ACPI mode. Newer devices however
only support the ACPI-based interface, preventing the current
driver from receiving events on them.
Fix this by always using the native ACPI-based interface for
receiving events.
Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Link: https://patch.msgid.link/20260708195553.7762-3-W_Armin@gmx.de
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
The event notification callback might access kbd_backlight even
when it was not successfully registered with the LED subsystem.
The same happens inside acpi_remove(), where the LED devices are
unregistered unconditionally.
Fix this by tracking the availability of the kbd_backlight LED
device and use devm_led_classdev_register() to let devres take
care of unregistering the LED devices during removal. For this
the parent device of the LED devices is changed to the native
platform device.
Fixes: ae26278829 ("platform/x86: lg-laptop: Use correct event for keyboard backlight FN-key")
Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Link: https://patch.msgid.link/20260708195553.7762-2-W_Armin@gmx.de
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Newer ThinkPad systems expose a USB-C Security (Restricted Mode) feature.
When active, USB-C data connections are disabled while power delivery is
preserved. This is useful for kiosk and physically-secured deployments.
Hardware interface:
The HKEY device exposes a read-only ACPI method USCS():
Return value bit layout:
Bit 16 : Capability flag (1 = feature present on this SKU)
Bit 0 : Current state (0 = security OFF, 1 = security ON)
The sysfs attribute is read-only.
The Fn+U followed by Fn+S hotkey chord is the only way to toggle the
hardware state.
Hotkey:
Fn+U followed by Fn+S generates HKEY event 0x131e.
sysfs interface:
/sys/devices/platform/thinkpad_acpi/usb_c_security (read-only)
"enabled\n" -- data connections are currently blocked
"disabled\n" -- data connections are currently allowed
The attribute is hidden on SKUs where the USCS capability bit (bit 16)
is not set, so there is no ABI impact on unsupported hardware.
Suggested-by: Mark Pearson <mpearson-lenovo@squebb.ca>
Signed-off-by: Vishnu Sankar <vishnuocv@gmail.com>
Link: https://patch.msgid.link/20260709021504.465792-1-vishnuocv@gmail.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Add power limits quirk entry for ASUS ROG FA608WV laptop.
The limits are extracted from the device's ThrottleGear XML configuration
file for the 'Ryzen' profile.
Signed-off-by: Marco Scardovi <scardracs@disroot.org>
Link: https://patch.msgid.link/20260701164003.4271-1-scardracs@disroot.org
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
