On shutdown when quotas are enabled, the shutdown can deadlock
trying to unpin the dquot buffer buf_log_item like so:
[ 3319.483590] task:kworker/20:0H state:D stack:14360 pid:1962230 tgid:1962230 ppid:2 task_flags:0x4208060 flags:0x00004000
[ 3319.493966] Workqueue: xfs-log/dm-6 xlog_ioend_work
[ 3319.498458] Call Trace:
[ 3319.500800] <TASK>
[ 3319.502809] __schedule+0x699/0xb70
[ 3319.512672] schedule+0x64/0xd0
[ 3319.515573] schedule_timeout+0x30/0xf0
[ 3319.528125] __down_common+0xc3/0x200
[ 3319.531488] __down+0x1d/0x30
[ 3319.534186] down+0x48/0x50
[ 3319.540501] xfs_buf_lock+0x3d/0xe0
[ 3319.543609] xfs_buf_item_unpin+0x85/0x1b0
[ 3319.547248] xlog_cil_committed+0x289/0x570
[ 3319.571411] xlog_cil_process_committed+0x6d/0x90
[ 3319.575590] xlog_state_shutdown_callbacks+0x52/0x110
[ 3319.580017] xlog_force_shutdown+0x169/0x1a0
[ 3319.583780] xlog_ioend_work+0x7c/0xb0
[ 3319.587049] process_scheduled_works+0x1d6/0x400
[ 3319.591127] worker_thread+0x202/0x2e0
[ 3319.594452] kthread+0x20c/0x240
The CIL push has seen the deadlock, so it has aborted the push and
is running CIL checkpoint completion to abort all the items in the
checkpoint. This calls ->iop_unpin(remove = true) to clean up the
log items in the checkpoint.
When a buffer log item is unpined like this, it needs to lock the
buffer to run io completion to correctly fail the buffer and run all
the required completions to fail attached log items as well. In this
case, the attempt to lock the buffer on unpin is hanging because the
buffer is already locked.
I suspected a leaked XFS_BLI_HOLD state because of XFS_BLI_STALE
handling changes I was testing, so I went looking for
pin events on HOLD buffers and unpin events on locked buffer. That
isolated this one buffer with these two events:
xfs_buf_item_pin: dev 251:6 daddr 0xa910 bbcount 0x2 hold 2 pincount 0 lock 0 flags DONE|KMEM recur 0 refcount 1 bliflags HOLD|DIRTY|LOGGED liflags DIRTY
....
xfs_buf_item_unpin: dev 251:6 daddr 0xa910 bbcount 0x2 hold 4 pincount 1 lock 0 flags DONE|KMEM recur 0 refcount 1 bliflags DIRTY liflags ABORTED
Firstly, bbcount = 0x2, which means it is not a single sector
structure. That rules out every xfs_trans_bhold() case except one:
dquot buffers.
Then hung task dumping gave this trace:
[ 3197.312078] task:fsync-tester state:D stack:12080 pid:2051125 tgid:2051125 ppid:1643233 task_flags:0x400000 flags:0x00004002
[ 3197.323007] Call Trace:
[ 3197.325581] <TASK>
[ 3197.327727] __schedule+0x699/0xb70
[ 3197.334582] schedule+0x64/0xd0
[ 3197.337672] schedule_timeout+0x30/0xf0
[ 3197.350139] wait_for_completion+0xbd/0x180
[ 3197.354235] __flush_workqueue+0xef/0x4e0
[ 3197.362229] xlog_cil_force_seq+0xa0/0x300
[ 3197.374447] xfs_log_force+0x77/0x230
[ 3197.378015] xfs_qm_dqunpin_wait+0x49/0xf0
[ 3197.382010] xfs_qm_dqflush+0x55/0x460
[ 3197.385663] xfs_qm_dquot_isolate+0x29e/0x4d0
[ 3197.389977] __list_lru_walk_one+0x141/0x220
[ 3197.398867] list_lru_walk_one+0x10/0x20
[ 3197.402713] xfs_qm_shrink_scan+0x6a/0x100
[ 3197.406699] do_shrink_slab+0x18a/0x350
[ 3197.410512] shrink_slab+0xf7/0x430
[ 3197.413967] drop_slab+0x97/0xf0
[ 3197.417121] drop_caches_sysctl_handler+0x59/0xc0
[ 3197.421654] proc_sys_call_handler+0x18b/0x280
[ 3197.426050] proc_sys_write+0x13/0x20
[ 3197.429750] vfs_write+0x2b8/0x3e0
[ 3197.438532] ksys_write+0x7e/0xf0
[ 3197.441742] __x64_sys_write+0x1b/0x30
[ 3197.445363] x64_sys_call+0x2c72/0x2f60
[ 3197.449044] do_syscall_64+0x6c/0x140
[ 3197.456341] entry_SYSCALL_64_after_hwframe+0x76/0x7e
Yup, another test run by check-parallel is running drop_caches
concurrently and the dquot shrinker for the hung filesystem is
running. That's trying to flush a dirty dquot from reclaim context,
and it waiting on a log force to complete. xfs_qm_dqflush is called
with the dquot buffer held locked, and so we've called
xfs_log_force() with that buffer locked.
Now the log force is waiting for a workqueue flush to complete, and
that workqueue flush is waiting of CIL checkpoint processing to
finish.
The CIL checkpoint processing is aborting all the log items it has,
and that requires locking aborted buffers to cancel them.
Now, normally this isn't a problem if we are issuing a log force
to unpin an object, because the ->iop_unpin() method wakes pin
waiters first. That results in the pin waiter finishing off whatever
it was doing, dropping the lock and then xfs_buf_item_unpin() can
lock the buffer and fail it.
However, xfs_qm_dqflush() is waiting on the -dquot- unpin event, not
the dquot buffer unpin event, and so it never gets woken and so does
not drop the buffer lock.
Inodes do not have this problem, as they can only be written from
one spot (->iop_push) whilst dquots can be written from multiple
places (memory reclaim, ->iop_push, xfs_dq_dqpurge, and quotacheck).
The reason that the dquot buffer has an attached buffer log item is
that it has been recently allocated. Initialisation of the dquot
buffer logs the buffer directly, thereby pinning it in memory. We
then modify the dquot in a separate operation, and have memory
reclaim racing with a shutdown and we trigger this deadlock.
check-parallel reproduces this reliably on 1kB FSB filesystems with
quota enabled because it does all of these things concurrently
without having to explicitly write tests to exercise these corner
case conditions.
xfs_qm_dquot_logitem_push() doesn't have this deadlock because it
checks if the dquot is pinned before locking the dquot buffer and
skipping it if it is pinned. This means the xfs_qm_dqunpin_wait()
log force in xfs_qm_dqflush() never triggers and we unlock the
buffer safely allowing a concurrent shutdown to fail the buffer
appropriately.
xfs_qm_dqpurge() could have this problem as it is called from
quotacheck and we might have allocated dquot buffers when recording
the quota updates. This can be fixed by calling
xfs_qm_dqunpin_wait() before we lock the dquot buffer. Because we
hold the dquot locked, nothing will be able to add to the pin count
between the unpin_wait and the dqflush callout, so this now makes
xfs_qm_dqpurge() safe against this race.
xfs_qm_dquot_isolate() can also be fixed this same way but, quite
frankly, we shouldn't be doing IO in memory reclaim context. If the
dquot is pinned or dirty, simply rotate it and let memory reclaim
come back to it later, same as we do for inodes.
This then gets rid of the nasty issue in xfs_qm_flush_one() where
quotacheck writeback races with memory reclaim flushing the dquots.
We can lift xfs_qm_dqunpin_wait() up into this code, then get rid of
the "can't get the dqflush lock" buffer write to cycle the dqlfush
lock and enable it to be flushed again. checking if the dquot is
pinned and returning -EAGAIN so that the dquot walk will revisit the
dquot again later.
Finally, with xfs_qm_dqunpin_wait() lifted into all the callers,
we can remove it from the xfs_qm_dqflush() code.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Carlos Maiolino <cmaiolino@redhat.com>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
There is a race condition that can trigger in dmflakey fstests that
can result in asserts in xfs_ialloc_read_agi() and
xfs_alloc_read_agf() firing. The asserts look like this:
XFS: Assertion failed: pag->pagf_freeblks == be32_to_cpu(agf->agf_freeblks), file: fs/xfs/libxfs/xfs_alloc.c, line: 3440
.....
Call Trace:
<TASK>
xfs_alloc_read_agf+0x2ad/0x3a0
xfs_alloc_fix_freelist+0x280/0x720
xfs_alloc_vextent_prepare_ag+0x42/0x120
xfs_alloc_vextent_iterate_ags+0x67/0x260
xfs_alloc_vextent_start_ag+0xe4/0x1c0
xfs_bmapi_allocate+0x6fe/0xc90
xfs_bmapi_convert_delalloc+0x338/0x560
xfs_map_blocks+0x354/0x580
iomap_writepages+0x52b/0xa70
xfs_vm_writepages+0xd7/0x100
do_writepages+0xe1/0x2c0
__writeback_single_inode+0x44/0x340
writeback_sb_inodes+0x2d0/0x570
__writeback_inodes_wb+0x9c/0xf0
wb_writeback+0x139/0x2d0
wb_workfn+0x23e/0x4c0
process_scheduled_works+0x1d4/0x400
worker_thread+0x234/0x2e0
kthread+0x147/0x170
ret_from_fork+0x3e/0x50
ret_from_fork_asm+0x1a/0x30
I've seen the AGI variant from scrub running on the filesysetm
after unmount failed due to systemd interference:
XFS: Assertion failed: pag->pagi_freecount == be32_to_cpu(agi->agi_freecount) || xfs_is_shutdown(pag->pag_mount), file: fs/xfs/libxfs/xfs_ialloc.c, line: 2804
.....
Call Trace:
<TASK>
xfs_ialloc_read_agi+0xee/0x150
xchk_perag_drain_and_lock+0x7d/0x240
xchk_ag_init+0x34/0x90
xchk_inode_xref+0x7b/0x220
xchk_inode+0x14d/0x180
xfs_scrub_metadata+0x2e2/0x510
xfs_ioc_scrub_metadata+0x62/0xb0
xfs_file_ioctl+0x446/0xbf0
__se_sys_ioctl+0x6f/0xc0
__x64_sys_ioctl+0x1d/0x30
x64_sys_call+0x1879/0x2ee0
do_syscall_64+0x68/0x130
? exc_page_fault+0x62/0xc0
entry_SYSCALL_64_after_hwframe+0x76/0x7e
Essentially, it is the same problem. When _flakey_drop_and_remount()
loads the drop-writes table, it makes all writes silently fail. Writes
are reported to the fs as completed successfully, but they are not
issued to the backing store. The filesystem sees the successful
write completion and marks the metadata buffer clean and removes it
from the AIL.
If this happens at the same time as memory pressure is occuring,
the now-clean AGF and/or AGI buffers can be reclaimed from memory.
Shortly afterwards, but before _flakey_drop_and_remount() runs
unmount, background writeback is kicked and it tries to allocate
blocks for the dirty pages in memory. This then tries to access the
AGF buffer we just turfed out of memory. It's not found, so it gets
read in from disk.
This is all fine, except for the fact that the last writeback of the
AGF did not actually reach disk. The AGF on disk is stale compared
to the in-memory state held by the perag, and so they don't match
and the assert fires.
Then other operations on that inode hang because the task was killed
whilst holding inode locks. e.g:
Workqueue: xfs-conv/dm-12 xfs_end_io
Call Trace:
<TASK>
__schedule+0x650/0xb10
schedule+0x6d/0xf0
schedule_preempt_disabled+0x15/0x30
rwsem_down_write_slowpath+0x31a/0x5f0
down_write+0x43/0x60
xfs_ilock+0x1a8/0x210
xfs_trans_alloc_inode+0x9c/0x240
xfs_iomap_write_unwritten+0xe3/0x300
xfs_end_ioend+0x90/0x130
xfs_end_io+0xce/0x100
process_scheduled_works+0x1d4/0x400
worker_thread+0x234/0x2e0
kthread+0x147/0x170
ret_from_fork+0x3e/0x50
ret_from_fork_asm+0x1a/0x30
</TASK>
and it's all down hill from there.
Memory pressure is one way to trigger this, another is to run "echo
3 > /proc/sys/vm/drop_caches" randomly while tests are running.
Regardless of how it is triggered, this effectively takes down the
system once umount hangs because it's holding a sb->s_umount lock
exclusive and now every sync(1) call gets stuck on it.
Fix this by replacing the asserts with a corruption detection check
and a shutdown.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Carlos Maiolino <cmaiolino@redhat.com>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
Lock order of xfs_ifree_cluster() is cluster buffer -> try ILOCK
-> IFLUSHING, except for the last inode in the cluster that is
triggering the free. In that case, the lock order is ILOCK ->
cluster buffer -> IFLUSHING.
xfs_iflush_cluster() uses cluster buffer -> try ILOCK -> IFLUSHING,
so this can safely run concurrently with xfs_ifree_cluster().
xfs_inode_item_precommit() uses ILOCK -> cluster buffer, but this
cannot race with xfs_ifree_cluster() so being in a different order
will not trigger a deadlock.
xfs_reclaim_inode() during a filesystem shutdown uses ILOCK ->
IFLUSHING -> cluster buffer via xfs_iflush_shutdown_abort(), and
this deadlocks against xfs_ifree_cluster() like so:
sysrq: Show Blocked State
task:kworker/10:37 state:D stack:12560 pid:276182 tgid:276182 ppid:2 flags:0x00004000
Workqueue: xfs-inodegc/dm-3 xfs_inodegc_worker
Call Trace:
<TASK>
__schedule+0x650/0xb10
schedule+0x6d/0xf0
schedule_timeout+0x8b/0x180
schedule_timeout_uninterruptible+0x1e/0x30
xfs_ifree+0x326/0x730
xfs_inactive_ifree+0xcb/0x230
xfs_inactive+0x2c8/0x380
xfs_inodegc_worker+0xaa/0x180
process_scheduled_works+0x1d4/0x400
worker_thread+0x234/0x2e0
kthread+0x147/0x170
ret_from_fork+0x3e/0x50
ret_from_fork_asm+0x1a/0x30
</TASK>
task:fsync-tester state:D stack:12160 pid:2255943 tgid:2255943 ppid:3988702 flags:0x00004006
Call Trace:
<TASK>
__schedule+0x650/0xb10
schedule+0x6d/0xf0
schedule_timeout+0x31/0x180
__down_common+0xbe/0x1f0
__down+0x1d/0x30
down+0x48/0x50
xfs_buf_lock+0x3d/0xe0
xfs_iflush_shutdown_abort+0x51/0x1e0
xfs_icwalk_ag+0x386/0x690
xfs_reclaim_inodes_nr+0x114/0x160
xfs_fs_free_cached_objects+0x19/0x20
super_cache_scan+0x17b/0x1a0
do_shrink_slab+0x180/0x350
shrink_slab+0xf8/0x430
drop_slab+0x97/0xf0
drop_caches_sysctl_handler+0x59/0xc0
proc_sys_call_handler+0x189/0x280
proc_sys_write+0x13/0x20
vfs_write+0x33d/0x3f0
ksys_write+0x7c/0xf0
__x64_sys_write+0x1b/0x30
x64_sys_call+0x271d/0x2ee0
do_syscall_64+0x68/0x130
entry_SYSCALL_64_after_hwframe+0x76/0x7e
We can't change the lock order of xfs_ifree_cluster() - XFS_ISTALE
and XFS_IFLUSHING are serialised through to journal IO completion
by the cluster buffer lock being held.
There's quite a few asserts in the code that check that XFS_ISTALE
does not occur out of sync with buffer locking (e.g. in
xfs_iflush_cluster). There's also a dependency on the inode log item
being removed from the buffer before XFS_IFLUSHING is cleared, also
with asserts that trigger on this.
Further, we don't have a requirement for the inode to be locked when
completing or aborting inode flushing because all the inode state
updates are serialised by holding the cluster buffer lock across the
IO to completion.
We can't check for XFS_IRECLAIM in xfs_ifree_mark_inode_stale() and
skip the inode, because there is no guarantee that the inode will be
reclaimed. Hence it *must* be marked XFS_ISTALE regardless of
whether reclaim is preparing to free that inode. Similarly, we can't
check for IFLUSHING before locking the inode because that would
result in dirty inodes not being marked with ISTALE in the event of
racing with XFS_IRECLAIM.
Hence we have to address this issue from the xfs_reclaim_inode()
side. It is clear that we cannot hold the inode locked here when
calling xfs_iflush_shutdown_abort() because it is the inode->buffer
lock order that causes the deadlock against xfs_ifree_cluster().
Hence we need to drop the ILOCK before aborting the inode in the
shutdown case. Once we've aborted the inode, we can grab the ILOCK
again and then immediately reclaim it as it is now guaranteed to be
clean.
Note that dropping the ILOCK in xfs_reclaim_inode() means that it
can now be locked by xfs_ifree_mark_inode_stale() and seen whilst in
this state. This is safe because we have left the XFS_IFLUSHING flag
on the inode and so xfs_ifree_mark_inode_stale() will simply set
XFS_ISTALE and move to the next inode. An ASSERT check in this path
needs to be tweaked to take into account this new shutdown
interaction.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Carlos Maiolino <cmaiolino@redhat.com>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
The MCA threshold limit must be reset after servicing the interrupt.
Currently, the restart function doesn't have an explicit check for this. It
makes some assumptions based on the current limit and what's in the registers.
These assumptions don't always hold, so the limit won't be reset in some
cases.
Make the reset condition explicit. Either an interrupt/overflow has occurred
or the bank is being initialized.
Signed-off-by: Yazen Ghannam <yazen.ghannam@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/20250624-wip-mca-updates-v4-4-236dd74f645f@amd.com
Ensure that sysfs init doesn't fail for new/unrecognized bank types or if
a bank has additional blocks available.
Most MCA banks have a single thresholding block, so the block takes the same
name as the bank.
Unified Memory Controllers (UMCs) are a special case where there are two
blocks and each has a unique name.
However, the microarchitecture allows for five blocks. Any new MCA bank types
with more than one block will be missing names for the extra blocks. The MCE
sysfs will fail to initialize in this case.
Fixes: 87a6d4091b ("x86/mce/AMD: Update sysfs bank names for SMCA systems")
Signed-off-by: Yazen Ghannam <yazen.ghannam@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/20250624-wip-mca-updates-v4-3-236dd74f645f@amd.com
Users can disable MCA polling by setting the "ignore_ce" parameter or by
setting "check_interval=0". This tells the kernel to *not* start the MCE
timer on a CPU.
If the user did not disable CMCI, then storms can occur. When these
happen, the MCE timer will be started with a fixed interval. After the
storm subsides, the timer's next interval is set to check_interval.
This disregards the user's input through "ignore_ce" and
"check_interval". Furthermore, if "check_interval=0", then the new timer
will run faster than expected.
Create a new helper to check these conditions and use it when a CMCI
storm ends.
[ bp: Massage. ]
Fixes: 7eae17c4ad ("x86/mce: Add per-bank CMCI storm mitigation")
Signed-off-by: Yazen Ghannam <yazen.ghannam@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/20250624-wip-mca-updates-v4-2-236dd74f645f@amd.com
It already depends on X86_32, but that's also set for ARCH=um.
Recent changes made UML no longer have IO port access since
it's not needed, but this driver uses it. Build it only for
HAS_IOPORT. This is pretty much the same as depending on X86,
but on the off-chance that HAS_IOPORT will ever be optional
on x86 HAS_IOPORT is the real prerequisite.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Property "num_cpu" and "feature" are read-only once eiointc is created,
which are set with KVM_DEV_LOONGARCH_EXTIOI_GRP_CTRL attr group before
device creation.
Attr group KVM_DEV_LOONGARCH_EXTIOI_GRP_SW_STATUS is to update register
and software state for migration and reset usage, property "num_cpu" and
"feature" can not be update again if it is created already.
Here discard write operation with property "num_cpu" and "feature" in
attr group KVM_DEV_LOONGARCH_EXTIOI_GRP_CTRL.
Cc: stable@vger.kernel.org
Fixes: 1ad7efa552 ("LoongArch: KVM: Add EIOINTC user mode read and write functions")
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
The maximum supported cpu number is EIOINTC_ROUTE_MAX_VCPUS about
irqchip EIOINTC, here add validation about cpu number to avoid array
pointer overflow.
Cc: stable@vger.kernel.org
Fixes: 1ad7efa552 ("LoongArch: KVM: Add EIOINTC user mode read and write functions")
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
With EIOINTC interrupt controller, physical CPU ID is set for irq route.
However the function kvm_get_vcpu() is used to get destination vCPU when
delivering irq. With API kvm_get_vcpu(), the logical CPU ID is used.
With API kvm_get_vcpu_by_cpuid(), vCPU ID can be searched from physical
CPU ID.
Cc: stable@vger.kernel.org
Fixes: 3956a52bc0 ("LoongArch: KVM: Add EIOINTC read and write functions")
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
With function eiointc_update_sw_coremap(), there is forced assignment
like val = *(u64 *)pvalue. Parameter pvalue may be pointer to char type
or others, there is problem with forced assignment with u64 type.
Here the detailed value is passed rather address pointer.
Cc: stable@vger.kernel.org
Fixes: 3956a52bc0 ("LoongArch: KVM: Add EIOINTC read and write functions")
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
IOCSR instruction supports 1/2/4/8 bytes access, the address should be
naturally aligned with its access size. Here address alignment check is
added in the EIOINTC kernel emulation.
Cc: stable@vger.kernel.org
Fixes: 3956a52bc0 ("LoongArch: KVM: Add EIOINTC read and write functions")
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
The empty panel_dpi struct was only ever used as a discriminant, but
it's kind of a hack, and with the reworks done in the previous patches,
we shouldn't need it anymore.
Let's get rid of it.
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Tested-by: Francesco Dolcini <francesco.dolcini@toradex.com> # Toradex Colibri iMX6
Link: https://lore.kernel.org/r/20250626-drm-panel-simple-fixes-v2-5-5afcaa608bdc@kernel.org
Signed-off-by: Maxime Ripard <mripard@kernel.org>
Commit de04bb0089 ("drm/panel/panel-simple: Use the new allocation in
place of devm_kzalloc()") moved the call to drm_panel_init into the
devm_drm_panel_alloc(), which needs a connector type to initialize
properly.
In the panel-dpi compatible case, the passed panel_desc structure is an
empty one used as a discriminant, and the connector type it contains
isn't actually initialized.
It is initialized through a call to panel_dpi_probe() later in the
function, which used to be before the call to drm_panel_init() that got
merged into devm_drm_panel_alloc().
So, we do need a proper panel_desc pointer before the call to
devm_drm_panel_alloc() now. All cases associate their panel_desc with
the panel compatible and use of_device_get_match_data, except for the
panel-dpi compatible.
In that case, we're expected to call panel_dpi_probe, which will
allocate and initialize the panel_desc for us.
Let's create such a helper function that would be called first in the
driver and will lookup the desc by compatible, or allocate one if
relevant.
Reported-by: Francesco Dolcini <francesco@dolcini.it>
Closes: https://lore.kernel.org/all/20250612081834.GA248237@francesco-nb/
Fixes: de04bb0089 ("drm/panel/panel-simple: Use the new allocation in place of devm_kzalloc()")
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Tested-by: Francesco Dolcini <francesco.dolcini@toradex.com> # Toradex Colibri iMX6
Link: https://lore.kernel.org/r/20250626-drm-panel-simple-fixes-v2-4-5afcaa608bdc@kernel.org
Signed-off-by: Maxime Ripard <mripard@kernel.org>
In order to fix the regession introduced by commit de04bb0089
("drm/panel/panel-simple: Use the new allocation in place of
devm_kzalloc()"), we need to move the panel_desc lookup into the common
panel_simple_probe() function.
There's two callers for that function, the probe implementations of the
platform and MIPI-DSI drivers panel-simple implements.
The MIPI-DSI driver's probe will need to access the current panel_desc
to initialize properly, which won't be possible anymore if we make that
lookup in panel_simple_probe().
However, we can make panel_simple_probe() return the initialized
panel_simple structure it allocated, which will contain a pointer to the
associated panel_desc in its desc field.
This doesn't fix de04bb0089 ("drm/panel/panel-simple: Use the new
allocation in place of devm_kzalloc()") still, but makes progress
towards that goal.
Fixes: de04bb0089 ("drm/panel/panel-simple: Use the new allocation in place of devm_kzalloc()")
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Tested-by: Francesco Dolcini <francesco.dolcini@toradex.com> # Toradex Colibri iMX6
Link: https://lore.kernel.org/r/20250626-drm-panel-simple-fixes-v2-3-5afcaa608bdc@kernel.org
Signed-off-by: Maxime Ripard <mripard@kernel.org>
If the panel-simple driver is probed from a panel-dpi compatible, the
driver will use an empty panel_desc structure as a descriminant. It
will then allocate and fill another panel_desc as part of its probe.
However, that allocation needs to happen after the panel_simple
structure has been allocated, since panel_dpi_probe(), the function
doing the panel_desc allocation and initialization, takes a panel_simple
pointer as an argument.
This pointer is used to fill the panel_simple->desc pointer that is
still initialized with the empty panel_desc when panel_dpi_probe() is
called.
Since commit de04bb0089 ("drm/panel/panel-simple: Use the new
allocation in place of devm_kzalloc()"), we will need the panel
connector type found in panel_desc to allocate panel_simple. This
creates a circular dependency where we need panel_desc to create
panel_simple, and need panel_simple to create panel_desc.
Let's break that dependency by making panel_dpi_probe simply return the
panel_desc it initialized and move the panel_simple->desc assignment to
the caller.
This will not fix the breaking commit entirely, but will move us towards
the right direction.
Fixes: de04bb0089 ("drm/panel/panel-simple: Use the new allocation in place of devm_kzalloc()")
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Tested-by: Francesco Dolcini <francesco.dolcini@toradex.com> # Toradex Colibri iMX6
Link: https://lore.kernel.org/r/20250626-drm-panel-simple-fixes-v2-2-5afcaa608bdc@kernel.org
Signed-off-by: Maxime Ripard <mripard@kernel.org>
This will be especially useful for generic panels (like panel-simple)
which can take different code path depending on if they are MIPI-DSI
devices or platform devices.
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Tested-by: Francesco Dolcini <francesco.dolcini@toradex.com> # Toradex Colibri iMX6
Link: https://lore.kernel.org/r/20250626-drm-panel-simple-fixes-v2-1-5afcaa608bdc@kernel.org
Signed-off-by: Maxime Ripard <mripard@kernel.org>
When two masters share an IOMMU, calling ops->of_xlate during
the second master's driver init may overwrite iommu->domain set
by the first. This causes the check if (iommu->domain == domain)
in rk_iommu_attach_device() to fail, resulting in the same
iommu->node being added twice to &rk_domain->iommus, which can
lead to an infinite loop in subsequent &rk_domain->iommus operations.
Cc: <stable@vger.kernel.org>
Fixes: 25c2325575 ("iommu/rockchip: Add missing set_platform_dma_ops callback")
Signed-off-by: Simon Xue <xxm@rock-chips.com>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Link: https://lore.kernel.org/r/20250623020018.584802-1-xxm@rock-chips.com
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
with hmac.
-----BEGIN PGP SIGNATURE-----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=zEf5
-----END PGP SIGNATURE-----
Merge tag 'v6.16-p6' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6
Pull crypto fix from Herbert Xu:
"This fixes a regression where wp512 can no longer be used with hmac"
* tag 'v6.16-p6' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
crypto: wp512 - Use API partial block handling
-----BEGIN PGP SIGNATURE-----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=mnLI
-----END PGP SIGNATURE-----
Merge tag 'bcachefs-2025-06-26' of git://evilpiepirate.org/bcachefs
Pull bcachefs fixes from Kent Overstreet:
- Lots of small check/repair fixes, primarily in subvol loop and
directory structure loop (when involving snapshots).
- Fix a few 6.16 regressions: rare UAF in the foreground allocator path
when taking a transaction restart from the transaction bump
allocator, and some small fallout from the change to log the error
being corrected in the journal when repairing errors, also some
fallout from the btree node read error logging improvements.
(Alan, Bharadwaj)
- New option: journal_rewind
This lets the entire filesystem be reset to an earlier point in time.
Note that this is only a disaster recovery tool, and right now there
are major caveats to using it (discards should be disabled, in
particular), but it successfully restored the filesystem of one of
the users who was bit by the subvolume deletion bug and didn't have
backups. I'll likely be making some changes to the discard path in
the future to make this a reliable recovery tool.
- Some new btree iterator tracepoints, for tracking down some
livelock-ish behaviour we've been seeing in the main data write path.
* tag 'bcachefs-2025-06-26' of git://evilpiepirate.org/bcachefs: (51 commits)
bcachefs: Plumb correct ip to trans_relock_fail tracepoint
bcachefs: Ensure we rewind to run recovery passes
bcachefs: Ensure btree node scan runs before checking for scanned nodes
bcachefs: btree_root_unreadable_and_scan_found_nothing should not be autofix
bcachefs: fix bch2_journal_keys_peek_prev_min() underflow
bcachefs: Use wait_on_allocator() when allocating journal
bcachefs: Check for bad write buffer key when moving from journal
bcachefs: Don't unlock the trans if ret doesn't match BCH_ERR_operation_blocked
bcachefs: Fix range in bch2_lookup_indirect_extent() error path
bcachefs: fix spurious error_throw
bcachefs: Add missing bch2_err_class() to fileattr_set()
bcachefs: Add missing key type checks to check_snapshot_exists()
bcachefs: Don't log fsck err in the journal if doing repair elsewhere
bcachefs: Fix *__bch2_trans_subbuf_alloc() error path
bcachefs: Fix missing newlines before ero
bcachefs: fix spurious error in read_btree_roots()
bcachefs: fsck: Fix oops in key_visible_in_snapshot()
bcachefs: fsck: fix unhandled restart in topology repair
bcachefs: fsck: Fix check_directory_structure when no check_dirents
bcachefs: Fix restart handling in btree_node_scrub_work()
...
- Convert altr,uart-1.0 and altr,juart-1.0 to DT schema. These were
applied for nios2, but never sent upstream.
- Fix extra '/' in fsl,ls1028a-reset '$id' path
- Fix warnings in ti,sn65dsi83 schema due to unnecessary $ref.
-----BEGIN PGP SIGNATURE-----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=ppJ5
-----END PGP SIGNATURE-----
Merge tag 'devicetree-fixes-for-6.16-1' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux
Pull devicetree fixes from Rob Herring:
- Convert altr,uart-1.0 and altr,juart-1.0 to DT schema. These were
applied for nios2, but never sent upstream.
- Fix extra '/' in fsl,ls1028a-reset '$id' path
- Fix warnings in ti,sn65dsi83 schema due to unnecessary $ref.
* tag 'devicetree-fixes-for-6.16-1' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux:
dt-bindings: serial: Convert altr,uart-1.0 to DT schema
dt-bindings: serial: Convert altr,juart-1.0 to DT schema
dt-bindings: soc: fsl,ls1028a-reset: Drop extra "/" in $id
dt-bindings: drm/bridge: ti-sn65dsi83: drop $ref to fix lvds-vod* warnings
Currently swap is restricted before drivers have had a chance to do
their prepare() PM callbacks. Restricting swap this early means that if
a driver needs to evict some content from memory into sawp in it's
prepare callback, it won't be able to.
On AMD dGPUs this can lead to failed suspends under memory pressure
situations as all VRAM must be evicted to system memory or swap.
Move the swap restriction to right after all devices have had a chance
to do the prepare() callback. If there is any problem with the sequence,
restore swap in the appropriate dpm resume callbacks or error handling
paths.
Closes: https://github.com/ROCm/ROCK-Kernel-Driver/issues/174
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/2362
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Tested-by: Nat Wittstock <nat@fardog.io>
Tested-by: Lucian Langa <lucilanga@7pot.org>
Link: https://patch.msgid.link/20250613214413.4127087-1-superm1@kernel.org
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
A previous commit aborted mapping more for a non-incremental ring for
bundle peeking, but depending on where in the process this peeking
happened, it would not necessarily prevent a retry by the user. That can
create gaps in the received/read data.
Add struct buf_sel_arg->partial_map, which can pass this information
back. The networking side can then map that to internal state and use it
to gate retry as well.
Since this necessitates a new flag, change io_sr_msg->retry to a
retry_flags member, and store both the retry and partial map condition
in there.
Cc: stable@vger.kernel.org
Fixes: 26ec15e4b0 ("io_uring/kbuf: don't truncate end buffer for multiple buffer peeks")
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Allow the flexfiles error handling to recognise NFS level errors (as
opposed to RPC level errors) and handle them separately. The main
motivator is the NFSERR_PERM errors that get returned if the NFS client
connects to the data server through a port number that is lower than
1024. In that case, the client should disconnect and retry a READ on a
different data server, or it should retry a WRITE after reconnecting.
Reviewed-by: Tigran Mkrtchyan <tigran.mkrtchyan@desy.de>
Fixes: d67ae825a5 ("pnfs/flexfiles: Add the FlexFile Layout Driver")
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Anna Schumaker <anna.schumaker@oracle.com>
When performing a file read from RDMA, smbd_recv() prints an "Invalid msg
type 4" error and fails the I/O. This is due to the switch-statement there
not handling the ITER_FOLIOQ handed down from netfslib.
Fix this by collapsing smbd_recv_buf() and smbd_recv_page() into
smbd_recv() and just using copy_to_iter() instead of memcpy(). This
future-proofs the function too, in case more ITER_* types are added.
Fixes: ee4cdf7ba8 ("netfs: Speed up buffered reading")
Reported-by: Stefan Metzmacher <metze@samba.org>
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Tom Talpey <tom@talpey.com>
cc: Paulo Alcantara (Red Hat) <pc@manguebit.com>
cc: Matthew Wilcox <willy@infradead.org>
cc: linux-cifs@vger.kernel.org
cc: netfs@lists.linux.dev
cc: linux-fsdevel@vger.kernel.org
Signed-off-by: Steve French <stfrench@microsoft.com>
The handling of received data in the smbdirect client code involves using
copy_to_iter() to copy data from the smbd_reponse struct's packet trailer
to a folioq buffer provided by netfslib that encapsulates a chunk of
pagecache.
If, however, CONFIG_HARDENED_USERCOPY=y, this will result in the checks
then performed in copy_to_iter() oopsing with something like the following:
CIFS: Attempting to mount //172.31.9.1/test
CIFS: VFS: RDMA transport established
usercopy: Kernel memory exposure attempt detected from SLUB object 'smbd_response_0000000091e24ea1' (offset 81, size 63)!
------------[ cut here ]------------
kernel BUG at mm/usercopy.c:102!
...
RIP: 0010:usercopy_abort+0x6c/0x80
...
Call Trace:
<TASK>
__check_heap_object+0xe3/0x120
__check_object_size+0x4dc/0x6d0
smbd_recv+0x77f/0xfe0 [cifs]
cifs_readv_from_socket+0x276/0x8f0 [cifs]
cifs_read_from_socket+0xcd/0x120 [cifs]
cifs_demultiplex_thread+0x7e9/0x2d50 [cifs]
kthread+0x396/0x830
ret_from_fork+0x2b8/0x3b0
ret_from_fork_asm+0x1a/0x30
The problem is that the smbd_response slab's packet field isn't marked as
being permitted for usercopy.
Fix this by passing parameters to kmem_slab_create() to indicate that
copy_to_iter() is permitted from the packet region of the smbd_response
slab objects, less the header space.
Fixes: ee4cdf7ba8 ("netfs: Speed up buffered reading")
Reported-by: Stefan Metzmacher <metze@samba.org>
Link: https://lore.kernel.org/r/acb7f612-df26-4e2a-a35d-7cd040f513e1@samba.org/
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Stefan Metzmacher <metze@samba.org>
Tested-by: Stefan Metzmacher <metze@samba.org>
cc: Paulo Alcantara <pc@manguebit.com>
cc: linux-cifs@vger.kernel.org
cc: netfs@lists.linux.dev
cc: linux-fsdevel@vger.kernel.org
Signed-off-by: Steve French <stfrench@microsoft.com>
Fix cifs_signal_cifsd_for_reconnect() to take the correct lock order
and prevent the following deadlock from happening
======================================================
WARNING: possible circular locking dependency detected
6.16.0-rc3-build2+ #1301 Tainted: G S W
------------------------------------------------------
cifsd/6055 is trying to acquire lock:
ffff88810ad56038 (&tcp_ses->srv_lock){+.+.}-{3:3}, at: cifs_signal_cifsd_for_reconnect+0x134/0x200
but task is already holding lock:
ffff888119c64330 (&ret_buf->chan_lock){+.+.}-{3:3}, at: cifs_signal_cifsd_for_reconnect+0xcf/0x200
which lock already depends on the new lock.
the existing dependency chain (in reverse order) is:
-> #2 (&ret_buf->chan_lock){+.+.}-{3:3}:
validate_chain+0x1cf/0x270
__lock_acquire+0x60e/0x780
lock_acquire.part.0+0xb4/0x1f0
_raw_spin_lock+0x2f/0x40
cifs_setup_session+0x81/0x4b0
cifs_get_smb_ses+0x771/0x900
cifs_mount_get_session+0x7e/0x170
cifs_mount+0x92/0x2d0
cifs_smb3_do_mount+0x161/0x460
smb3_get_tree+0x55/0x90
vfs_get_tree+0x46/0x180
do_new_mount+0x1b0/0x2e0
path_mount+0x6ee/0x740
do_mount+0x98/0xe0
__do_sys_mount+0x148/0x180
do_syscall_64+0xa4/0x260
entry_SYSCALL_64_after_hwframe+0x76/0x7e
-> #1 (&ret_buf->ses_lock){+.+.}-{3:3}:
validate_chain+0x1cf/0x270
__lock_acquire+0x60e/0x780
lock_acquire.part.0+0xb4/0x1f0
_raw_spin_lock+0x2f/0x40
cifs_match_super+0x101/0x320
sget+0xab/0x270
cifs_smb3_do_mount+0x1e0/0x460
smb3_get_tree+0x55/0x90
vfs_get_tree+0x46/0x180
do_new_mount+0x1b0/0x2e0
path_mount+0x6ee/0x740
do_mount+0x98/0xe0
__do_sys_mount+0x148/0x180
do_syscall_64+0xa4/0x260
entry_SYSCALL_64_after_hwframe+0x76/0x7e
-> #0 (&tcp_ses->srv_lock){+.+.}-{3:3}:
check_noncircular+0x95/0xc0
check_prev_add+0x115/0x2f0
validate_chain+0x1cf/0x270
__lock_acquire+0x60e/0x780
lock_acquire.part.0+0xb4/0x1f0
_raw_spin_lock+0x2f/0x40
cifs_signal_cifsd_for_reconnect+0x134/0x200
__cifs_reconnect+0x8f/0x500
cifs_handle_standard+0x112/0x280
cifs_demultiplex_thread+0x64d/0xbc0
kthread+0x2f7/0x310
ret_from_fork+0x2a/0x230
ret_from_fork_asm+0x1a/0x30
other info that might help us debug this:
Chain exists of:
&tcp_ses->srv_lock --> &ret_buf->ses_lock --> &ret_buf->chan_lock
Possible unsafe locking scenario:
CPU0 CPU1
---- ----
lock(&ret_buf->chan_lock);
lock(&ret_buf->ses_lock);
lock(&ret_buf->chan_lock);
lock(&tcp_ses->srv_lock);
*** DEADLOCK ***
3 locks held by cifsd/6055:
#0: ffffffff857de398 (&cifs_tcp_ses_lock){+.+.}-{3:3}, at: cifs_signal_cifsd_for_reconnect+0x7b/0x200
#1: ffff888119c64060 (&ret_buf->ses_lock){+.+.}-{3:3}, at: cifs_signal_cifsd_for_reconnect+0x9c/0x200
#2: ffff888119c64330 (&ret_buf->chan_lock){+.+.}-{3:3}, at: cifs_signal_cifsd_for_reconnect+0xcf/0x200
Cc: linux-cifs@vger.kernel.org
Reported-by: David Howells <dhowells@redhat.com>
Fixes: d7d7a66aac ("cifs: avoid use of global locks for high contention data")
Reviewed-by: David Howells <dhowells@redhat.com>
Tested-by: David Howells <dhowells@redhat.com>
Signed-off-by: Paulo Alcantara (Red Hat) <pc@manguebit.org>
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Currently, the MCE subsystem sysfs interface will be removed if the
thresholding sysfs interface fails to be created. A common failure is due to
new MCA bank types that are not recognized and don't have a short name set.
The MCA thresholding feature is optional and should not break the common MCE
sysfs interface. Also, new MCA bank types are occasionally introduced, and
updates will be needed to recognize them. But likewise, this should not break
the common sysfs interface.
Keep the MCE sysfs interface regardless of the status of the thresholding
sysfs interface.
Signed-off-by: Yazen Ghannam <yazen.ghannam@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Qiuxu Zhuo <qiuxu.zhuo@intel.com>
Reviewed-by: Tony Luck <tony.luck@intel.com>
Tested-by: Tony Luck <tony.luck@intel.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/20250624-wip-mca-updates-v4-1-236dd74f645f@amd.com
Inform potential firmware developers that WExx ACPI methods are
always called by the WMI driver core even if the associated WMI event
is not marked as being expensive.
Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Link: https://lore.kernel.org/r/20250619221440.6737-2-W_Armin@gmx.de
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
It turns out that the Windows WMI-ACPI driver always enables/disables
WMI events regardless of whether they are marked as expensive or not.
This finding is further reinforced when reading the documentation of
the WMI_FUNCTION_CONTROL_CALLBACK callback used by Windows drivers
for enabling/disabling WMI devices:
The DpWmiFunctionControl routine enables or disables
notification of events, and enables or disables data
collection for data blocks that the driver registered
as expensive to collect.
Follow this behavior to fix the WMI event used for reporting hotkey
events on the Dell Latitude 5400 and likely many more devices.
Reported-by: Dmytro Bagrii <dimich.dmb@gmail.com>
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=220246
Tested-by: Dmytro Bagrii <dimich.dmb@gmail.com>
Fixes: 656f0961d1 ("platform/x86: wmi: Rework WCxx/WExx ACPI method handling")
Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Link: https://lore.kernel.org/r/20250619221440.6737-1-W_Armin@gmx.de
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Delayed work to prevent USB3 hubs from runtime-suspending immediately
after resume was added in commit 8f5b7e2bec ("usb: hub: fix detection
of high tier USB3 devices behind suspended hubs").
This delayed work needs be flushed if system suspends, or hub needs to
be quiesced for other reasons right after resume. Not flushing it
triggered issues on QC SC8280XP CRD board during suspend/resume testing.
Fix it by flushing the delayed resume work in hub_quiesce()
The delayed work item that allow hub runtime suspend is also scheduled
just before calling autopm get. Alan pointed out there is a small risk
that work is run before autopm get, which would call autopm put before
get, and mess up the runtime pm usage order.
Swap the order of work sheduling and calling autopm get to solve this.
Cc: stable <stable@kernel.org>
Fixes: 8f5b7e2bec ("usb: hub: fix detection of high tier USB3 devices behind suspended hubs")
Reported-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Closes: https://lore.kernel.org/linux-usb/acaaa928-832c-48ca-b0ea-d202d5cd3d6c@oss.qualcomm.com
Reported-by: Alan Stern <stern@rowland.harvard.edu>
Closes: https://lore.kernel.org/linux-usb/c73fbead-66d7-497a-8fa1-75ea4761090a@rowland.harvard.edu
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20250626130102.3639861-2-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
change error log to use correct bus number from main_mux_devs
instead of cpld_devs.
Fixes: 662f24826f ("platform/mellanox: Add support for new SN2201 system")
Signed-off-by: Alok Tiwari <alok.a.tiwari@oracle.com>
Reviewed-by: Vadim Pasternak <vadimp@nvidia.com>
Link: https://lore.kernel.org/r/20250622072921.4111552-2-alok.a.tiwari@oracle.com
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
This commit corrects several minor typographical errors in comments
and error messages across multiple Mellanox platform driver.
Fixed spelling of "thresholds", "region", "platform", "default",
and removed redundant spaces in comment strings and error logs.
These changes are cosmetic and do not affect runtime behavior.
Signed-off-by: Alok Tiwari <alok.a.tiwari@oracle.com>
Reviewed-by: Vadim Pasternak <vadimp@nvidia.com>
Reviewed-by: David Thompson <davthompson@nvidia.com>
Link: https://lore.kernel.org/r/20250622072921.4111552-1-alok.a.tiwari@oracle.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Add additional checks that queue depth and number of queues are
non-zero.
Signed-off-by: Ronnie Sahlberg <rsahlberg@whamcloud.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20250626022046.235018-1-ronniesahlberg@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
During driver probe we might be briefly using CT safe mode, which
is based on a delayed work, but usually we are able to stop this
once we have IRQ fully operational. However, if we abort the probe
quite early then during unwind we might try to destroy the workqueue
while there is still a pending delayed work that attempts to restart
itself which triggers a WARN.
This was recently observed during unsuccessful VF initialization:
[ ] xe 0000:00:02.1: probe with driver xe failed with error -62
[ ] ------------[ cut here ]------------
[ ] workqueue: cannot queue safe_mode_worker_func [xe] on wq xe-g2h-wq
[ ] WARNING: CPU: 9 PID: 0 at kernel/workqueue.c:2257 __queue_work+0x287/0x710
[ ] RIP: 0010:__queue_work+0x287/0x710
[ ] Call Trace:
[ ] delayed_work_timer_fn+0x19/0x30
[ ] call_timer_fn+0xa1/0x2a0
Exit the CT safe mode on unwind to avoid that warning.
Fixes: 09b286950f ("drm/xe/guc: Allow CTB G2H processing without G2H IRQ")
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Link: https://lore.kernel.org/r/20250612220937.857-3-michal.wajdeczko@intel.com
(cherry picked from commit 2ddbb73ec2)
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Only need the flush for DPT host updates here. Normal GGTT updates don't
need special flush.
Fixes: 01570b4469 ("drm/xe/bmg: implement Wa_16023588340")
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: stable@vger.kernel.org # v6.12+
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://lore.kernel.org/r/20250606104546.1996818-4-matthew.auld@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
(cherry picked from commit 35db1da40c)
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Flushing l2 is only needed after all data has been written.
Fixes: 01570b4469 ("drm/xe/bmg: implement Wa_16023588340")
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Matthew Auld <matthew.auld@intel.com>
Cc: stable@vger.kernel.org # v6.12+
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://lore.kernel.org/r/20250606104546.1996818-3-matthew.auld@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
(cherry picked from commit 0dd2dd0182)
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
The variable index is modified and reused as array index when modify
register EIOINTC_ENABLE. There will be array index overflow problem.
Cc: stable@vger.kernel.org
Fixes: 3956a52bc0 ("LoongArch: KVM: Add EIOINTC read and write functions")
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
When the KCOV is enabled all functions get instrumented, unless
the __no_sanitize_coverage attribute is used. To prepare for
__no_sanitize_coverage being applied to __init functions, we have to
handle differences in how GCC's inline optimizations get resolved.
For LoongArch this exposed several places where __init annotations
were missing but ended up being "accidentally correct". So fix these
cases.
Signed-off-by: Kees Cook <kees@kernel.org>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
The EFI memory map at 'boot_memmap' is crucial for kdump to understand
the primary kernel's memory layout. This memory region, typically part
of EFI Boot Services (BS) data, can be overwritten after ExitBootServices
if not explicitly preserved by the kernel.
This commit addresses this by:
1. Calling memblock_reserve() to reserve the entire physical region
occupied by the EFI memory map (header + descriptors). This prevents
the primary kernel from reallocating and corrupting this area.
2. Setting the EFI_PRESERVE_BS_REGIONS flag in efi.flags. This indicates
that efforts have been made to preserve critical BS code/data regions
which can be useful for other kernel subsystems or debugging.
These changes ensure the original EFI memory map data remains intact,
improving kdump reliability and potentially aiding other EFI-related
functionalities that might rely on preserved BS code/data.
Signed-off-by: Ming Wang <wangming01@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
After commit a934a57a42 ("scripts/misc-check: check missing #include
<linux/export.h> when W=1") and 7d95680d64 ("scripts/misc-check:
check unnecessary #include <linux/export.h> when W=1"), we get some build
warnings with W=1:
arch/loongarch/kernel/acpi.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
arch/loongarch/kernel/alternative.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
arch/loongarch/kernel/kfpu.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
arch/loongarch/kernel/traps.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
arch/loongarch/kernel/unwind_guess.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
arch/loongarch/kernel/unwind_orc.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
arch/loongarch/kernel/unwind_prologue.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
arch/loongarch/lib/crc32-loongarch.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
arch/loongarch/lib/csum.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
arch/loongarch/kernel/elf.c: warning: EXPORT_SYMBOL() is not used, but #include <linux/export.h> is present
arch/loongarch/kernel/paravirt.c: warning: EXPORT_SYMBOL() is not used, but #include <linux/export.h> is present
arch/loongarch/pci/pci.c: warning: EXPORT_SYMBOL() is not used, but #include <linux/export.h> is present
So fix these build warnings for LoongArch.
Reviewed-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
