The ready event list of an epoll object is protected by read-write
semaphore:
- The consumer (waiter) acquires the write lock and takes items.
- the producer (waker) takes the read lock and adds items.
The point of this design is enabling epoll to scale well with large number
of producers, as multiple producers can hold the read lock at the same
time.
Unfortunately, this implementation may cause scheduling priority inversion
problem. Suppose the consumer has higher scheduling priority than the
producer. The consumer needs to acquire the write lock, but may be blocked
by the producer holding the read lock. Since read-write semaphore does not
support priority-boosting for the readers (even with CONFIG_PREEMPT_RT=y),
we have a case of priority inversion: a higher priority consumer is blocked
by a lower priority producer. This problem was reported in [1].
Furthermore, this could also cause stall problem, as described in [2].
To fix this problem, make the event list half-lockless:
- The consumer acquires a mutex (ep->mtx) and takes items.
- The producer locklessly adds items to the list.
Performance is not the main goal of this patch, but as the producer now can
add items without waiting for consumer to release the lock, performance
improvement is observed using the stress test from
https://github.com/rouming/test-tools/blob/master/stress-epoll.c. This is
the same test that justified using read-write semaphore in the past.
Testing using 12 x86_64 CPUs:
Before After Diff
threads events/ms events/ms
8 6932 19753 +185%
16 7820 27923 +257%
32 7648 35164 +360%
64 9677 37780 +290%
128 11166 38174 +242%
Testing using 1 riscv64 CPU (averaged over 10 runs, as the numbers are
noisy):
Before After Diff
threads events/ms events/ms
1 73 129 +77%
2 151 216 +43%
4 216 364 +69%
8 234 382 +63%
16 251 392 +56%
Reported-by: Frederic Weisbecker <frederic@kernel.org>
Closes: https://lore.kernel.org/linux-rt-users/20210825132754.GA895675@lothringen/ [1]
Reported-by: Valentin Schneider <vschneid@redhat.com>
Closes: https://lore.kernel.org/linux-rt-users/xhsmhttqvnall.mognet@vschneid.remote.csb/ [2]
Signed-off-by: Nam Cao <namcao@linutronix.de>
Link: https://lore.kernel.org/20250527090836.1290532-1-namcao@linutronix.de
Tested-by: K Prateek Nayak <kprateek.nayak@amd.com>
Acked-by: Frederic Weisbecker <frederic@kernel.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
According to Bspec, bits 0~9 of MI_STORE_DATA_IMM must not exceed 0x3FE.
The macro MI_SDI_NUM_QW(x) evaluates to 2 * x + 1, which means the
condition 2 * x + 1 <= 0x3FE must be satisfied. Therefore, the maximum
valid value for x is 0x1FE, not 0x1FF.
v2
- Replace 0x1fe with macro MAX_PTE_PER_SDI (Auld, Matthew & Patelczyk, Maciej)
v3
- Change macro MAX_PTE_PER_SDI from 0x1fe to 0x1feU (De Marchi, Lucas)
Bspec: 60246
Fixes: 9c44fd5f6e ("drm/xe: Add migrate layer functions for SVM support")
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: Brian3 Nguyen <brian3.nguyen@intel.com>
Cc: Alex Zuo <alex.zuo@intel.com>
Cc: Matthew Auld <matthew.auld@intel.com>
Cc: Maciej Patelczyk <maciej.patelczyk@intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Suggested-by: Shuicheng Lin <shuicheng.lin@intel.com>
Signed-off-by: Jia Yao <jia.yao@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Maciej Patelczyk <maciej.patelczyk@intel.com>
Link: https://lore.kernel.org/r/20250612224620.161105-1-jia.yao@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
(cherry picked from commit c038bdba98)
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Introducing support for smbus re-broke i2cdetect, causing it to detect
devices at every i2c address, just as it did prior to being fixed in
commit 49e1f0fd0d ("i2c: microchip-core: fix "ghost" detections").
This was caused by an oversight, where the new smbus code failed to
check the return value of mchp_corei2c_xfer(). Check it, and propagate
any errors.
Fixes: d6ceb40538 ("i2c: microchip-corei2c: add smbus support")
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
Link: https://lore.kernel.org/r/20250630-shopper-proven-500f4075e7d6@spud
I226 devices advertise support for the PCI-E link L1.2 substate. However,
due to a hardware limitation, the exit latency from this low-power state
is longer than the packet buffer can tolerate under high traffic
conditions. This can lead to packet loss and degraded performance.
To mitigate this, disable the L1.2 substate. The increased power draw
between L1.1 and L1.2 is insignificant.
Fixes: 4354621173 ("igc: Add new device ID's")
Link: https://lore.kernel.org/intel-wired-lan/15248b4f-3271-42dd-8e35-02bfc92b25e1@intel.com
Signed-off-by: Vitaly Lifshits <vitaly.lifshits@intel.com>
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Tested-by: Mor Bar-Gabay <morx.bar.gabay@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Commit 524346e9d7 ("ublk: build batch from IOs in same io_ring_ctx and io task")
need to dereference `io->cmd` for checking if the IO can be added to current
batch, see ublk_belong_to_same_batch() and io_uring_cmd_ctx_handle(). However,
`io->cmd` may become invalid after the uring_cmd is canceled.
Fixes it by only allowing to queue this IO in case that ublk_prep_req()
returns `BLK_STS_OK`, when 'io->cmd' is guaranteed to be valid.
Reported-by: Changhui Zhong <czhong@redhat.com>
Fixes: 524346e9d7 ("ublk: build batch from IOs in same io_ring_ctx and io task")
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20250701072325.1458109-1-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Remove incorrect checks on cqspi->rx_chan that cause driver breakage
during failure cleanup. Ensure proper resource freeing on the success
path when operating in cqspi->use_direct_mode, preventing leaks and
improving stability.
Signed-off-by: Khairul Anuar Romli <khairul.anuar.romli@altera.com>
Reviewed-by: Dan Carpenter <dan.carpenter@linaro.org>
Link: https://patch.msgid.link/89765a2b94f047ded4f14babaefb7ef92ba07cb2.1751274389.git.khairul.anuar.romli@altera.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Chris Mason reported a performance regression on big iron. Reports of
this kind were usually reported as part of a micro benchmark but Chris'
test did mimic his real workload. This makes it a real regression.
The root cause is rcuref_get() which is invoked during each futex
operation. If all threads of an application do this simultaneously then
it leads to cache line bouncing and the performance drops.
Disable FUTEX_PRIVATE_HASH entirely for this cycle. The performance
regression will be addressed in the following cycle enabling the option
again.
Closes: https://lore.kernel.org/all/3ad05298-351e-4d61-9972-ca45a0a50e33@meta.com/
Reported-by: Chris Mason <clm@meta.com>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20250630145034.8JnINEaS@linutronix.de
Trying to compile an x86 kernel on big endian results in this error:
net/ipv4/netfilter/iptable_nat.o: warning: objtool: iptable_nat_table_init+0x150: Unknown annotation type: 50331648
make[5]: *** [scripts/Makefile.build:287: net/ipv4/netfilter/iptable_nat.o] Error 255
Reason is a missing endian conversion in read_annotate().
Add the missing conversion to fix this.
Fixes: 2116b349e2 ("objtool: Generic annotation infrastructure")
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20250630131230.4130185-1-hca@linux.ibm.com
On Mon, Jun 02, 2025 at 03:22:13PM +0800, Kuyo Chang wrote:
> So, the potential race scenario is:
>
> CPU0 CPU1
> // doing migrate_swap(cpu0/cpu1)
> stop_two_cpus()
> ...
> // doing _cpu_down()
> sched_cpu_deactivate()
> set_cpu_active(cpu, false);
> balance_push_set(cpu, true);
> cpu_stop_queue_two_works
> __cpu_stop_queue_work(stopper1,...);
> __cpu_stop_queue_work(stopper2,..);
> stop_cpus_in_progress -> true
> preempt_enable();
> ...
> 1st balance_push
> stop_one_cpu_nowait
> cpu_stop_queue_work
> __cpu_stop_queue_work
> list_add_tail -> 1st add push_work
> wake_up_q(&wakeq); -> "wakeq is empty.
> This implies that the stopper is at wakeq@migrate_swap."
> preempt_disable
> wake_up_q(&wakeq);
> wake_up_process // wakeup migrate/0
> try_to_wake_up
> ttwu_queue
> ttwu_queue_cond ->meet below case
> if (cpu == smp_processor_id())
> return false;
> ttwu_do_activate
> //migrate/0 wakeup done
> wake_up_process // wakeup migrate/1
> try_to_wake_up
> ttwu_queue
> ttwu_queue_cond
> ttwu_queue_wakelist
> __ttwu_queue_wakelist
> __smp_call_single_queue
> preempt_enable();
>
> 2nd balance_push
> stop_one_cpu_nowait
> cpu_stop_queue_work
> __cpu_stop_queue_work
> list_add_tail -> 2nd add push_work, so the double list add is detected
> ...
> ...
> cpu1 get ipi, do sched_ttwu_pending, wakeup migrate/1
>
So this balance_push() is part of schedule(), and schedule() is supposed
to switch to stopper task, but because of this race condition, stopper
task is stuck in WAKING state and not actually visible to be picked.
Therefore CPU1 can do another schedule() and end up doing another
balance_push() even though the last one hasn't been done yet.
This is a confluence of fail, where both wake_q and ttwu_wakelist can
cause crucial wakeups to be delayed, resulting in the malfunction of
balance_push.
Since there is only a single stopper thread to be woken, the wake_q
doesn't really add anything here, and can be removed in favour of
direct wakeups of the stopper thread.
Then add a clause to ttwu_queue_cond() to ensure the stopper threads
are never queued / delayed.
Of all 3 moving parts, the last addition was the balance_push()
machinery, so pick that as the point the bug was introduced.
Fixes: 2558aacff8 ("sched/hotplug: Ensure only per-cpu kthreads run during hotplug")
Reported-by: Kuyo Chang <kuyo.chang@mediatek.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: Kuyo Chang <kuyo.chang@mediatek.com>
Link: https://lkml.kernel.org/r/20250605100009.GO39944@noisy.programming.kicks-ass.net
Zero is a valid value for "preempt_dynamic_mode", namely
"preempt_dynamic_none".
Fix the off-by-one in preempt_model_str(), so that "preempty_dynamic_none"
is correctly formatted as PREEMPT(none) instead of PREEMPT(undef).
Fixes: 8bdc5daaa0 ("sched: Add a generic function to return the preemption string")
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Tested-by: Shrikanth Hegde <sshegde@linux.ibm.com>
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/20250626-preempt-str-none-v2-1-526213b70a89@linutronix.de
MEI GSC interrupt comes from i915. It has top half and bottom half.
Top half is called from i915 interrupt handler. It should be in
irq disabled context.
With RT kernel, by default i915 IRQ handler is in threaded IRQ. MEI GSC
top half might be in threaded IRQ context. generic_handle_irq_safe API
could be called from either IRQ or process context, it disables local
IRQ then calls MEI GSC interrupt top half.
This change fixes A380/A770 GPU boot hang issue with RT kernel.
Fixes: 1e3dc1d862 ("drm/i915/gsc: add gsc as a mei auxiliary device")
Tested-by: Furong Zhou <furong.zhou@intel.com>
Suggested-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Acked-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Junxiao Chang <junxiao.chang@intel.com>
Link: https://lore.kernel.org/r/20250425151108.643649-1-junxiao.chang@intel.com
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
(cherry picked from commit dccf655f69)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
The following error has been reported sporadically by CI when a test
unbinds the i915 driver on a ring submission platform:
<4> [239.330153] ------------[ cut here ]------------
<4> [239.330166] i915 0000:00:02.0: [drm] drm_WARN_ON(dev_priv->mm.shrink_count)
<4> [239.330196] WARNING: CPU: 1 PID: 18570 at drivers/gpu/drm/i915/i915_gem.c:1309 i915_gem_cleanup_early+0x13e/0x150 [i915]
...
<4> [239.330640] RIP: 0010:i915_gem_cleanup_early+0x13e/0x150 [i915]
...
<4> [239.330942] Call Trace:
<4> [239.330944] <TASK>
<4> [239.330949] i915_driver_late_release+0x2b/0xa0 [i915]
<4> [239.331202] i915_driver_release+0x86/0xa0 [i915]
<4> [239.331482] devm_drm_dev_init_release+0x61/0x90
<4> [239.331494] devm_action_release+0x15/0x30
<4> [239.331504] release_nodes+0x3d/0x120
<4> [239.331517] devres_release_all+0x96/0xd0
<4> [239.331533] device_unbind_cleanup+0x12/0x80
<4> [239.331543] device_release_driver_internal+0x23a/0x280
<4> [239.331550] ? bus_find_device+0xa5/0xe0
<4> [239.331563] device_driver_detach+0x14/0x20
...
<4> [357.719679] ---[ end trace 0000000000000000 ]---
If the test also unloads the i915 module then that's followed with:
<3> [357.787478] =============================================================================
<3> [357.788006] BUG i915_vma (Tainted: G U W N ): Objects remaining on __kmem_cache_shutdown()
<3> [357.788031] -----------------------------------------------------------------------------
<3> [357.788204] Object 0xffff888109e7f480 @offset=29824
<3> [357.788670] Allocated in i915_vma_instance+0xee/0xc10 [i915] age=292729 cpu=4 pid=2244
<4> [357.788994] i915_vma_instance+0xee/0xc10 [i915]
<4> [357.789290] init_status_page+0x7b/0x420 [i915]
<4> [357.789532] intel_engines_init+0x1d8/0x980 [i915]
<4> [357.789772] intel_gt_init+0x175/0x450 [i915]
<4> [357.790014] i915_gem_init+0x113/0x340 [i915]
<4> [357.790281] i915_driver_probe+0x847/0xed0 [i915]
<4> [357.790504] i915_pci_probe+0xe6/0x220 [i915]
...
Closer analysis of CI results history has revealed a dependency of the
error on a few IGT tests, namely:
- igt@api_intel_allocator@fork-simple-stress-signal,
- igt@api_intel_allocator@two-level-inception-interruptible,
- igt@gem_linear_blits@interruptible,
- igt@prime_mmap_coherency@ioctl-errors,
which invisibly trigger the issue, then exhibited with first driver unbind
attempt.
All of the above tests perform actions which are actively interrupted with
signals. Further debugging has allowed to narrow that scope down to
DRM_IOCTL_I915_GEM_EXECBUFFER2, and ring_context_alloc(), specific to ring
submission, in particular.
If successful then that function, or its execlists or GuC submission
equivalent, is supposed to be called only once per GEM context engine,
followed by raise of a flag that prevents the function from being called
again. The function is expected to unwind its internal errors itself, so
it may be safely called once more after it returns an error.
In case of ring submission, the function first gets a reference to the
engine's legacy timeline and then allocates a VMA. If the VMA allocation
fails, e.g. when i915_vma_instance() called from inside is interrupted
with a signal, then ring_context_alloc() fails, leaving the timeline held
referenced. On next I915_GEM_EXECBUFFER2 IOCTL, another reference to the
timeline is got, and only that last one is put on successful completion.
As a consequence, the legacy timeline, with its underlying engine status
page's VMA object, is still held and not released on driver unbind.
Get the legacy timeline only after successful allocation of the context
engine's VMA.
v2: Add a note on other submission methods (Krzysztof Karas):
Both execlists and GuC submission use lrc_alloc() which seems free
from a similar issue.
Fixes: 75d0a7f31e ("drm/i915: Lift timeline into intel_context")
Closes: https://gitlab.freedesktop.org/drm/i915/kernel/-/issues/12061
Cc: Chris Wilson <chris.p.wilson@linux.intel.com>
Cc: Matthew Auld <matthew.auld@intel.com>
Cc: Krzysztof Karas <krzysztof.karas@intel.com>
Reviewed-by: Sebastian Brzezinka <sebastian.brzezinka@intel.com>
Reviewed-by: Krzysztof Niemiec <krzysztof.niemiec@intel.com>
Signed-off-by: Janusz Krzysztofik <janusz.krzysztofik@linux.intel.com>
Reviewed-by: Nitin Gote <nitin.r.gote@intel.com>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Signed-off-by: Andi Shyti <andi.shyti@linux.intel.com>
Link: https://lore.kernel.org/r/20250611104352.1014011-2-janusz.krzysztofik@linux.intel.com
(cherry picked from commit cc43422b3c)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Commit 81256a50aa ("x86/mm: Make memremap(MEMREMAP_WB) map memory as
encrypted by default") changed the default behavior of
memremap(MEMREMAP_WB) and started mapping memory as encrypted.
The driver requires the fifo memory to be decrypted to communicate with
the host but was relaying on the old default behavior of
memremap(MEMREMAP_WB) and thus broke.
Fix it by explicitly specifying the desired behavior and passing
MEMREMAP_DEC to memremap.
Fixes: 81256a50aa ("x86/mm: Make memremap(MEMREMAP_WB) map memory as encrypted by default")
Signed-off-by: Marko Kiiskila <marko.kiiskila@broadcom.com>
Signed-off-by: Zack Rusin <zack.rusin@broadcom.com>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: linux-mm@kvack.org
Cc: linux-kernel@vger.kernel.org
Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Link: https://lore.kernel.org/r/20250618192926.1092450-1-zack.rusin@broadcom.com
- MGMT: set_mesh: update LE scan interval and window
- MGMT: mesh_send: check instances prior disabling advertising
- hci_sync: revert some mesh modifications
- hci_sync: Set extended advertising data synchronously
- hci_sync: Prevent unintended pause by checking if advertising is active
-----BEGIN PGP SIGNATURE-----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=QBPI
-----END PGP SIGNATURE-----
Merge tag 'for-net-2025-06-27' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth
Luiz Augusto von Dentz says:
====================
bluetooth pull request for net:
- MGMT: set_mesh: update LE scan interval and window
- MGMT: mesh_send: check instances prior disabling advertising
- hci_sync: revert some mesh modifications
- hci_sync: Set extended advertising data synchronously
- hci_sync: Prevent unintended pause by checking if advertising is active
* tag 'for-net-2025-06-27' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth:
Bluetooth: HCI: Set extended advertising data synchronously
Bluetooth: MGMT: mesh_send: check instances prior disabling advertising
Bluetooth: MGMT: set_mesh: update LE scan interval and window
Bluetooth: hci_sync: revert some mesh modifications
Bluetooth: Prevent unintended pause by checking if advertising is active
====================
Link: https://patch.msgid.link/20250627181601.520435-1-luiz.dentz@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Commit d53320aeef ("dt-bindings: net: Rename
renesas,r9a09g057-gbeth.yaml") renames the net devicetree binding
renesas,r9a09g057-gbeth.yaml to renesas,rzv2h-gbeth.yaml, but misses to
adjust the file entry in the RENESAS RZ/V2H(P) DWMAC GBETH GLUE LAYER
DRIVER section in MAINTAINERS.
Adjust the file entry after this file renaming.
Signed-off-by: Lukas Bulwahn <lukas.bulwahn@redhat.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Link: https://patch.msgid.link/20250627134453.51780-1-lukas.bulwahn@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
There is a occasional problem that ping is failed between AML devices.
That is because the manual enablement of the security Tx path on the
hardware is missing, no matter what its previous state was.
Fixes: 6f8b4c01a8 ("net: txgbe: Implement PHYLINK for AML 25G/10G devices")
Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/5BDFB14C57D1C42A+20250626085153.86122-1-jiawenwu@trustnetic.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=F1L2
-----END PGP SIGNATURE-----
Merge tag 'io_uring-6.16-20250630' of git://git.kernel.dk/linux
Pull io_uring fix from Jens Axboe:
"Now that anonymous inodes set S_IFREG, this breaks the io_uring
read/write retries for short reads/writes. As things like timerfd and
eventfd are anon inodes, applications that previously did:
unsigned long event_data[2];
io_uring_prep_read(sqe, evfd, event_data, sizeof(event_data), 0);
and just got a short read when 1 event was posted, will now wait for
the full amount before posting a completion.
This caused issues for the ghostty application, making it basically
unusable due to excessive buffering"
* tag 'io_uring-6.16-20250630' of git://git.kernel.dk/linux:
io_uring: gate REQ_F_ISREG on !S_ANON_INODE as well
When using Secure TSC, the GUEST_TSC_FREQ MSR reports a frequency based on
the nominal P0 frequency, which deviates slightly (typically ~0.2%) from
the actual mean TSC frequency due to clocking parameters.
Over extended VM uptime, this discrepancy accumulates, causing clock skew
between the hypervisor and a SEV-SNP VM, leading to early timer interrupts as
perceived by the guest.
The guest kernel relies on the reported nominal frequency for TSC-based
timekeeping, while the actual frequency set during SNP_LAUNCH_START may
differ. This mismatch results in inaccurate time calculations, causing the
guest to perceive hrtimers as firing earlier than expected.
Utilize the TSC_FACTOR from the SEV firmware's secrets page (see "Secrets
Page Format" in the SNP Firmware ABI Specification) to calculate the mean
TSC frequency, ensuring accurate timekeeping and mitigating clock skew in
SEV-SNP VMs.
Use early_ioremap_encrypted() to map the secrets page as
ioremap_encrypted() uses kmalloc() which is not available during early TSC
initialization and causes a panic.
[ bp: Drop the silly dummy var:
https://lore.kernel.org/r/20250630192726.GBaGLlHl84xIopx4Pt@fat_crate.local ]
Fixes: 73bbf3b0fb ("x86/tsc: Init the TSC for Secure TSC guests")
Signed-off-by: Nikunj A Dadhania <nikunj@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/20250630081858.485187-1-nikunj@amd.com
Today, a few work structs inside tcon are initialized inside
cifs_get_tcon and not in tcon_info_alloc. As a result, if a tcon
is obtained from tcon_info_alloc, but not called as a part of
cifs_get_tcon, we may trip over.
Cc: <stable@vger.kernel.org>
Signed-off-by: Shyam Prasad N <sprasad@microsoft.com>
Reviewed-by: Paulo Alcantara (Red Hat) <pc@manguebit.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
PL1 cannot be disabled on some platforms. The ENABLE bit is still set
after software clears it. This behavior leads to a scenario where, upon
user request to disable the Power Limit through the powercap sysfs, the
ENABLE bit remains set while the CLAMPING bit is inadvertently cleared.
According to the Intel Software Developer's Manual, the CLAMPING bit,
"When set, allows the processor to go below the OS requested P states in
order to maintain the power below specified Platform Power Limit value."
Thus this means the system may operate at higher power levels than
intended on such platforms.
Enhance the code to check ENABLE bit after writing to it, and stop
further processing if ENABLE bit cannot be changed.
Reported-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Fixes: 2d281d8196 ("PowerCap: Introduce Intel RAPL power capping driver")
Cc: All applicable <stable@vger.kernel.org>
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Link: https://patch.msgid.link/20250619071340.384782-1-rui.zhang@intel.com
[ rjw: Use str_enabled_disabled() instead of open-coded equivalent ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
[Why]
OLED panels can be fully off, but this behavior is unexpected.
[How]
Ensure that minimum luminance is at least 1.
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/4338
Reviewed-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Ray Wu <ray.wu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 51496c7737)
[WHY]
Rounding error sometimes occurs when the refresh rate is equal to a panel's
max refresh rate, causing HDMI compliance failures.
[HOW]
Added a case so that we round up to avoid v_total_min to be below a panel's
minimum bound.
Reviewed-by: Jun Lei <jun.lei@amd.com>
Signed-off-by: Harold Sun <Harold.Sun@amd.com>
Signed-off-by: Ray Wu <ray.wu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit fe7645d22b)
These were missed when support was added for other generations.
The callbacks are called unconditionally so we need to make
sure all generations have them.
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/4304
Link: https://github.com/ROCm/ROCm/issues/4965
Fixes: bac38ca8c4 ("drm/amdkfd: implement per queue sdma reset for gfx 9.4+")
Cc: Jonathan Kim <jonathan.kim@amd.com>
Reported-by: Johl Brown <johlbrown@gmail.com>
Reviewed-by: Jonathan Kim <jonathan.kim@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 1e9d17a5dc)
Cc: stable@vger.kernel.org
patch dd64956685 ("drm/amdgpu: Remove duplicated "context still
alive" check") removed ctx put, which will cause amdgpu_ctx_fini()
cannot be called and then cause some finished fence that added by
amdgpu_ctx_add_fence() cannot be released and cause memleak.
Fixes: dd64956685 ("drm/amdgpu: Remove duplicated "context still alive" check")
Signed-off-by: Lin.Cao <lincao12@amd.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@igalia.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 8cf66089e2)
Cc: stable@vger.kernel.org
If the process is exiting, the mmput inside mmu notifier callback from
compactd or fork or numa balancing could release the last reference
of mm struct to call exit_mmap and free_pgtable, this triggers deadlock
with below backtrace.
The deadlock will leak kfd process as mmu notifier release is not called
and cause VRAM leaking.
The fix is to take mm reference mmget_non_zero when adding prange to the
deferred list to pair with mmput in deferred list work.
If prange split and add into pchild list, the pchild work_item.mm is not
used, so remove the mm parameter from svm_range_unmap_split and
svm_range_add_child.
The backtrace of hung task:
INFO: task python:348105 blocked for more than 64512 seconds.
Call Trace:
__schedule+0x1c3/0x550
schedule+0x46/0xb0
rwsem_down_write_slowpath+0x24b/0x4c0
unlink_anon_vmas+0xb1/0x1c0
free_pgtables+0xa9/0x130
exit_mmap+0xbc/0x1a0
mmput+0x5a/0x140
svm_range_cpu_invalidate_pagetables+0x2b/0x40 [amdgpu]
mn_itree_invalidate+0x72/0xc0
__mmu_notifier_invalidate_range_start+0x48/0x60
try_to_unmap_one+0x10fa/0x1400
rmap_walk_anon+0x196/0x460
try_to_unmap+0xbb/0x210
migrate_page_unmap+0x54d/0x7e0
migrate_pages_batch+0x1c3/0xae0
migrate_pages_sync+0x98/0x240
migrate_pages+0x25c/0x520
compact_zone+0x29d/0x590
compact_zone_order+0xb6/0xf0
try_to_compact_pages+0xbe/0x220
__alloc_pages_direct_compact+0x96/0x1a0
__alloc_pages_slowpath+0x410/0x930
__alloc_pages_nodemask+0x3a9/0x3e0
do_huge_pmd_anonymous_page+0xd7/0x3e0
__handle_mm_fault+0x5e3/0x5f0
handle_mm_fault+0xf7/0x2e0
hmm_vma_fault.isra.0+0x4d/0xa0
walk_pmd_range.isra.0+0xa8/0x310
walk_pud_range+0x167/0x240
walk_pgd_range+0x55/0x100
__walk_page_range+0x87/0x90
walk_page_range+0xf6/0x160
hmm_range_fault+0x4f/0x90
amdgpu_hmm_range_get_pages+0x123/0x230 [amdgpu]
amdgpu_ttm_tt_get_user_pages+0xb1/0x150 [amdgpu]
init_user_pages+0xb1/0x2a0 [amdgpu]
amdgpu_amdkfd_gpuvm_alloc_memory_of_gpu+0x543/0x7d0 [amdgpu]
kfd_ioctl_alloc_memory_of_gpu+0x24c/0x4e0 [amdgpu]
kfd_ioctl+0x29d/0x500 [amdgpu]
Fixes: fa582c6f36 ("drm/amdkfd: Use mmget_not_zero in MMU notifier")
Signed-off-by: Philip Yang <Philip.Yang@amd.com>
Reviewed-by: Felix Kuehling <felix.kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit a29e067bd3)
Cc: stable@vger.kernel.org
The i2c_dw_xfer_init() function requires msgs and msg_write_idx from the
dev context to be initialized.
amd_i2c_dw_xfer_quirk() inits msgs and msgs_num, but not msg_write_idx.
This could allow an out of bounds access (of msgs).
Initialize msg_write_idx before calling i2c_dw_xfer_init().
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Fixes: 17631e8ca2 ("i2c: designware: Add driver support for AMD NAVI GPU")
Cc: <stable@vger.kernel.org> # v5.13+
Signed-off-by: Michael J. Ruhl <michael.j.ruhl@intel.com>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
Link: https://lore.kernel.org/r/20250627143511.489570-1-michael.j.ruhl@intel.com
This got missed during SDMA 4.4.4 support.
Fixes: 968e3811c3 ("drm/amdgpu: add initial support for sdma444")
Signed-off-by: Kent Russell <kent.russell@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 51526efe02)
Cc: stable@vger.kernel.org
Set memory mtype to UC host memory when ext-coherent
flag is set and memory is registered as a SVM allocation.
Reviewed-by: Amber Lin <Amber.Lin@amd.com>
Signed-off-by: David Yat Sin <David.YatSin@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 5d14fdab47)
SDMA 5.x only supports engine soft reset which resets
all queues on the engine. As such, we need to suspend
KFD queues around resets like we do for SDMA 4.x.
Reviewed-by: Jesse Zhang <Jesse.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 61feed0baa)
The commit 76c968e75715 ("Input: alps - switch to use scnprintf() to suppress
truncation warning") converted one place in the driver while the other left
untouched. Convert the other place as well.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20250630082245.1416796-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
I have been working on mlx5 related code for several years,
contributing features, code reviews, and occasional maintainer tasks
when needed. This patch makes my maintainer role official.
Signed-off-by: Mark Bloch <mbloch@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Link: https://patch.msgid.link/20250627014252.1262592-1-saeed@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Perform fix similar to the one in the commit 85e444a681 ("drm/bridge:
Fix assignment of the of_node of the parent to aux bridge").
The assignment of the of_node to the aux HPD bridge needs to mark the
of_node as reused, otherwise driver core will attempt to bind resources
like pinctrl, which is going to fail as corresponding pins are already
marked as used by the parent device.
Fix that by using the device_set_of_node_from_dev() helper instead of
assigning it directly.
Fixes: e560518a6c ("drm/bridge: implement generic DP HPD bridge")
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20250608-fix-aud-hpd-bridge-v1-1-4641a6f8e381@oss.qualcomm.com
The commit 5ea6b17027 ("drm/panel: Add prepare_prev_first flag to
drm_panel") and commit 0974687a19 ("drm/bridge: panel: Set
pre_enable_prev_first from drmm_panel_bridge_add") added handling of
panel's prepare_prev_first to devm_panel_bridge_add() and
drmm_panel_bridge_add(). However if the driver calls
drm_panel_bridge_add_typed() directly, then the flag won't be handled
and thus the drm_bridge.pre_enable_prev_first will not be set.
Move prepare_prev_first handling to the drm_panel_bridge_add_typed() so
that there is no way to miss the flag.
Fixes: 5ea6b17027 ("drm/panel: Add prepare_prev_first flag to drm_panel")
Fixes: 0974687a19 ("drm/bridge: panel: Set pre_enable_prev_first from drmm_panel_bridge_add")
Reported-by: Svyatoslav Ryhel <clamor95@gmail.com>
Closes: https://lore.kernel.org/dri-devel/CAPVz0n3YZass3Bns1m0XrFxtAC0DKbEPiW6vXimQx97G243sXw@mail.gmail.com/
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20250220-panel_prev_first-v1-1-b9e787825a1a@linaro.org
Drivers:
- cmos: use spin_lock_irqsave in cmos_interrupt
- pcf2127: fix SPI command byte for PCF2131
- s5m: add S2MPG10 support
-----BEGIN PGP SIGNATURE-----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=p1Mo
-----END PGP SIGNATURE-----
Merge tag 'rtc-6.16-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux
Pull RTC fixes from Alexandre Belloni:
"Some fixes for 6.16. The cmos one is important for PREEMPT_RT. I've
also added the s5m changes as they had a dependency on the MFD pull
request that was included in 6.16-rc1 and we didn't synchronize before
the merge window and they won't hurt.
- cmos: use spin_lock_irqsave in cmos_interrupt
- pcf2127: fix SPI command byte for PCF2131
- s5m: add S2MPG10 support"
* tag 'rtc-6.16-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux:
rtc: pcf2127: add missing semicolon after statement
rtc: pcf2127: fix SPI command byte for PCF2131
rtc: cmos: use spin_lock_irqsave in cmos_interrupt
rtc: s5m: replace open-coded read/modify/write registers with regmap helpers
rtc: s5m: replace regmap_update_bits with regmap_clear/set_bits
rtc: s5m: switch to devm_device_init_wakeup
rtc: s5m: fix a typo: peding -> pending
rtc: s5m: add support for S2MPG10 RTC
rtc: s5m: prepare for external regmap
rtc: s5m: cache device type during probe
Currently, the driver_data of the i2c ID table is wrong, so it won't
work if any mp886x user makes use of the ID table. Fortunately, there's
no such user in upstream source code, we can fix the issue by using
different ID table entry for mp8867 and mp8869.
Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
Link: https://patch.msgid.link/20250629095918.912-1-jszhang@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Currently, the driver_data of the i2c ID table is wrong, so it won't
work if any sy8824x user makes use of the ID table. Fortunately, there's
no such user in upstream source code, we can fix the issue by using
different ID table entry for sy8824c, sy8824e, sy20276 and sy20278.
Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
Link: https://patch.msgid.link/20250629095905.898-1-jszhang@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Delayed work that prevents USB3 hubs from runtime-suspending too early
needed to be flushed in hub_quiesce() to resolve issues detected on
QC SC8280XP CRD board during suspend resume testing.
This flushing did however trigger new issues on Raspberry Pi 3B+, which
doesn't have USB3 ports, and doesn't queue any post resume delayed work.
The flushed 'hub->init_work' item is used for several purposes, and
is originally initialized with a 'NULL' work function. The work function
is also changed on the fly, which may contribute to the issue.
Solve this by creating a dedicated delayed work item for post resume work,
and flush that delayed work in hub_quiesce()
Cc: stable <stable@kernel.org>
Fixes: a49e1e2e78 ("usb: hub: Fix flushing and scheduling of delayed work that tunes runtime pm")
Reported-by: Mark Brown <broonie@kernel.org>
Closes: https://lore.kernel.org/linux-usb/aF5rNp1l0LWITnEB@finisterre.sirena.org.uk
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Tested-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com> # SC8280XP CRD
Tested-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20250627164348.3982628-2-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add FALLOC_FL_ALLOCATE_RANGE to the set of supported fallocate flags in
XFS_FALLOC_FL_SUPPORTED. This change improves code clarity and maintains
by explicitly showing this flag in the supported flags mask.
Note that since FALLOC_FL_ALLOCATE_RANGE is defined as 0x00, this addition
has no functional modifications.
Reviewed-by: Carlos Maiolino <cmaiolino@redhat.com>
Signed-off-by: Youling Tang <tangyouling@kylinos.cn>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
Merge series from Gabor Juhos <j4g8y7@gmail.com>:
The 'spi-qpic-nand' driver may cause memory corruption under some
circumstances. The first patch in the series changes the driver to
avoid that, whereas the second adds some sanity checks to the common
QPIC code in order to make detecting such errors easier in the future.
Unlocking the resv object was missing in the error path, additionally to
that we should move over the resource only after the fence slot was
reserved.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Fixes: c8d4c18bfb ("dma-buf/drivers: make reserving a shared slot mandatory v4")
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20250616130726.22863-3-christian.koenig@amd.com
Even the kerneldoc says that with a zero timeout the function should not
wait for anything, but still return 1 to indicate that the fences are
signaled now.
Unfortunately that isn't what was implemented, instead of only returning
1 we also waited for at least one jiffies.
Fix that by adjusting the handling to what the function is actually
documented to do.
v2: improve code readability
Reported-by: Marek Olšák <marek.olsak@amd.com>
Reported-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Lucas Stach <l.stach@pengutronix.de>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20250129105841.1806-1-christian.koenig@amd.com
Fixes a logic issue in mlxreg_lc_completion_notify() where the
intention was to check if MLXREG_LC_POWERED flag is not set before
powering on the device.
The original code used "state & ~MLXREG_LC_POWERED" to check for the
absence of the POWERED bit. However this condition evaluates to true
even when other bits are set, leading to potentially incorrect
behavior.
Corrected the logic to explicitly check for the absence of
MLXREG_LC_POWERED using !(state & MLXREG_LC_POWERED).
Fixes: 62f9529b8d ("platform/mellanox: mlxreg-lc: Add initial support for Nvidia line card devices")
Suggested-by: Vadim Pasternak <vadimp@nvidia.com>
Signed-off-by: Alok Tiwari <alok.a.tiwari@oracle.com>
Link: https://lore.kernel.org/r/20250630105812.601014-1-alok.a.tiwari@oracle.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
