udp_v4_early_demux now returns drop reasons as it either returns 0 or
ip_mc_validate_source, which returns itself a drop reason. However its
use was not converted in ip_rcv_finish_core and the drop reason is
ignored, leading to potentially skipping increasing LINUX_MIB_IPRPFILTER
if the drop reason is SKB_DROP_REASON_IP_RPFILTER.
This is a fix and we're not converting udp_v4_early_demux to explicitly
return a drop reason to ease backports; this can be done as a follow-up.
Fixes: d46f827016 ("net: ip: make ip_mc_validate_source() return drop reason")
Cc: Menglong Dong <menglong8.dong@gmail.com>
Reported-by: Sabrina Dubroca <sd@queasysnail.net>
Signed-off-by: Antoine Tenart <atenart@kernel.org>
Reviewed-by: Sabrina Dubroca <sd@queasysnail.net>
Link: https://patch.msgid.link/20250701074935.144134-1-atenart@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When setting "ethtool -L eth0 combined 1", the number of RX/TX queue is
changed to be 1. RSS is disabled at this moment, and the indices of FDIR
have not be changed in wx_set_rss_queues(). So the combined count still
shows the previous value. This issue was introduced when supporting
FDIR. Fix it for those devices that support FDIR.
Fixes: 34744a7749 ("net: txgbe: add FDIR info to ethtool ops")
Cc: stable@vger.kernel.org
Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/A5C8FE56D6C04608+20250701070625.73680-1-jiawenwu@trustnetic.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The link status is latched low so that momentary link drops
can be detected. Always double-reading the status defeats this
design feature. Only double read if link was already down
This prevents unnecessary duplicate readings of the link status.
Fixes: 4f3b20bfbb ("amd-xgbe: add support for rx-adaptation")
Signed-off-by: Raju Rangoju <Raju.Rangoju@amd.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250701065016.4140707-1-Raju.Rangoju@amd.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Certain classful qdiscs may invoke their classes' dequeue handler on an
enqueue operation. This may unexpectedly empty the child qdisc and thus
make an in-flight class passive via qlen_notify(). Most qdiscs do not
expect such behaviour at this point in time and may re-activate the
class eventually anyways which will lead to a use-after-free.
The referenced fix commit attempted to fix this behavior for the HFSC
case by moving the backlog accounting around, though this turned out to
be incomplete since the parent's parent may run into the issue too.
The following reproducer demonstrates this use-after-free:
tc qdisc add dev lo root handle 1: drr
tc filter add dev lo parent 1: basic classid 1:1
tc class add dev lo parent 1: classid 1:1 drr
tc qdisc add dev lo parent 1:1 handle 2: hfsc def 1
tc class add dev lo parent 2: classid 2:1 hfsc rt m1 8 d 1 m2 0
tc qdisc add dev lo parent 2:1 handle 3: netem
tc qdisc add dev lo parent 3:1 handle 4: blackhole
echo 1 | socat -u STDIN UDP4-DATAGRAM:127.0.0.1:8888
tc class delete dev lo classid 1:1
echo 1 | socat -u STDIN UDP4-DATAGRAM:127.0.0.1:8888
Since backlog accounting issues leading to a use-after-frees on stale
class pointers is a recurring pattern at this point, this patch takes
a different approach. Instead of trying to fix the accounting, the patch
ensures that qdisc_tree_reduce_backlog always calls qlen_notify when
the child qdisc is empty. This solves the problem because deletion of
qdiscs always involves a call to qdisc_reset() and / or
qdisc_purge_queue() which ultimately resets its qlen to 0 thus causing
the following qdisc_tree_reduce_backlog() to report to the parent. Note
that this may call qlen_notify on passive classes multiple times. This
is not a problem after the recent patch series that made all the
classful qdiscs qlen_notify() handlers idempotent.
Fixes: 3f98113810 ("sch_hfsc: Fix qlen accounting bug when using peek in hfsc_enqueue()")
Signed-off-by: Lion Ackermann <nnamrec@gmail.com>
Reviewed-by: Jamal Hadi Salim <jhs@mojatatu.com>
Acked-by: Cong Wang <xiyou.wangcong@gmail.com>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Link: https://patch.msgid.link/d912cbd7-193b-4269-9857-525bee8bbb6a@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
- A fix for a percpu variable that may lie in the vmalloc region and on which we used __pa()
- A fix to require at least clang-17 to prevent build issues with previous versions on kCFI
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQQgN2CKhD/Nf5v80u9kP7K8koXvigUCaGUntQAKCRBkP7K8koXv
ik9lAP9Qkpw1DDDcBcaX2ADpV6vXPW078QDCqRhTuGAtXCtpqAD9FVk6DwYpOynf
X10CZ++iRAc1WiEmzcSKHtQc5zATBgI=
=hLOv
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=f7kw
-----END PGP SIGNATURE-----
Merge tag 'riscv-fixes-6.16-rc4' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/alexghiti/linux into fixes
riscv fixes for 6.16-rc4
- A fix for a percpu variable that may lie in the vmalloc region and on which we used __pa()
- A fix to require at least clang-17 to prevent build issues with previous versions on kCFI
* tag 'riscv-fixes-6.16-rc4' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/alexghiti/linux:
riscv: cpu_ops_sbi: Use static array for boot_data
riscv: Require clang-17 or newer for kCFI
- Fix PCI error recovery and bring it in line with AER/EEH
-----BEGIN PGP SIGNATURE-----
iI0EABYKADUWIQQrtrZiYVkVzKQcYivNdxKlNrRb8AUCaGU3EBccYWdvcmRlZXZA
bGludXguaWJtLmNvbQAKCRDNdxKlNrRb8BoVAP4+t6zSnkV8nSDTX6yISaI9o8Dx
v4feTwMOkizuFbQbxQEA/QiQsN4bOymNDWwNgkzLDEBjirVLsYVzlvS2ttFfjAE=
=oStU
-----END PGP SIGNATURE-----
Merge tag 's390-6.16-4' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull s390 fixes from Alexander Gordeev:
- Fix PCI error recovery and bring it in line with AER/EEH
* tag 's390-6.16-4' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
s390/pci: Allow automatic recovery with minimal driver support
s390/pci: Do not try re-enabling load/store if device is disabled
s390/pci: Fix stale function handles in error handling
Some changes to the userspace selftest framework cause the iommufd tests
to start failing. This turned out to be bugs in the iommufd side that were
just getting uncovered.
- Deal with MAP_HUGETLB mmaping more than requested even when in MAP_FIXED
mode
- Fixup missing error flow cleanup in the test
- Check that the memory allocations suceeded
- Suppress some bogus gcc 'may be used uninitialized' warnings
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRRRCHOFoQz/8F5bUaFwuHvBreFYQUCaGU5zgAKCRCFwuHvBreF
YWsUAP9tLIwPDojp5bovlHRn6D9EbeJo96DSaG7ZRKLeBMJzSAEAtob6On8QNTUY
paSxWftGWC0Xyy5BXrAg/HTEM394PAg=
=UXkc
-----END PGP SIGNATURE-----
Merge tag 'for-linus-iommufd' of git://git.kernel.org/pub/scm/linux/kernel/git/jgg/iommufd
Pull iommufd fixes from Jason Gunthorpe:
"Some changes to the userspace selftest framework cause the iommufd
tests to start failing. This turned out to be bugs in the iommufd side
that were just getting uncovered.
- Deal with MAP_HUGETLB mmaping more than requested even when in
MAP_FIXED mode
- Fixup missing error flow cleanup in the test
- Check that the memory allocations suceeded
- Suppress some bogus gcc 'may be used uninitialized' warnings"
* tag 'for-linus-iommufd' of git://git.kernel.org/pub/scm/linux/kernel/git/jgg/iommufd:
iommufd/selftest: Fix build warnings due to uninitialized mfd
iommufd/selftest: Add asserts testing global mfd
iommufd/selftest: Add missing close(mfd) in memfd_mmap()
iommufd/selftest: Fix iommufd_dirty_tracking with large hugepage sizes
Several mlx5 bugs, crashers, and reports
- Limit stack usage
- Fix mis-use of __xa_store/erase() without holding the lock to a locked
version
- Rate limit prints in the gid cache error cases
- Fully initialize the event object before making it globally visible in
an xarray
- Fix deadlock inside the ODP code if the MMU notifier was called from a
reclaim context
- Include missed counters for some switchdev configurations and mulit-port MPV
mode
- Fix loopback packet support when in mulit-port MPV mode
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRRRCHOFoQz/8F5bUaFwuHvBreFYQUCaGVC1AAKCRCFwuHvBreF
YeaCAP4opgkgFIqpAcpYVZbNjeh4XGbH04mLlP+sKU07U+U+6AD/WubEZZdttP4m
vODiddGUIdw3ZvrFDoqWlZ7A/8/SdgI=
=vc41
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma
Pull rdma fixes from Jason Gunthorpe:
"Several mlx5 bugs, crashers, and reports:
- Limit stack usage
- Fix mis-use of __xa_store/erase() without holding the lock to a
locked version
- Rate limit prints in the gid cache error cases
- Fully initialize the event object before making it globally visible
in an xarray
- Fix deadlock inside the ODP code if the MMU notifier was called
from a reclaim context
- Include missed counters for some switchdev configurations and
mulit-port MPV mode
- Fix loopback packet support when in mulit-port MPV mode"
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma:
RDMA/mlx5: Fix vport loopback for MPV device
RDMA/mlx5: Fix CC counters query for MPV
RDMA/mlx5: Fix HW counters query for non-representor devices
IB/core: Annotate umem_mutex acquisition under fs_reclaim for lockdep
IB/mlx5: Fix potential deadlock in MR deregistration
RDMA/mlx5: Initialize obj_event->obj_sub_list before xa_insert
RDMA/core: Rate limit GID cache warning messages
RDMA/mlx5: Fix unsafe xarray access in implicit ODP handling
RDMA/mlx5: reduce stack usage in mlx5_ib_ufile_hw_cleanup
Lists should have fixed amount if items, so add missing constraint to
the 'reg' property (only one address space entry).
Fixes: c5eda03330 ("dt-bindings: i2c: Add Realtek RTL I2C Controller")
Cc: <stable@vger.kernel.org> # v6.13+
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
Link: https://lore.kernel.org/r/20250702061530.6940-2-krzysztof.kozlowski@linaro.org
Making anonymous inodes regular files comes with a lot of risk and
regression potential as evidenced by a recent hickup in io_uring. We're
better of continuing to not have them be regular files. Since we have
S_ANON_INODE we can port all of our assertions easily.
Link: https://lore.kernel.org/20250702-work-fixes-v1-1-ff76ea589e33@kernel.org
Fixes: cfd86ef7e8 ("anon_inode: use a proper mode internally")
Acked-by: Jens Axboe <axboe@kernel.dk>
Cc: stable@kernel.org
Reported-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Christian Brauner <brauner@kernel.org>
These Lenovo Laptops have the DMICs connected to the host instead of the
CS42L43 and so need the SOC_SDW_CODEC_MIC quirk.
Signed-off-by: Simon Trimmer <simont@opensource.cirrus.com>
Link: https://patch.msgid.link/20250702112235.377479-1-simont@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
dma_map_XXX() functions return values DMA_MAPPING_ERROR as error values
which is often ~0. The error value should be tested with
dma_mapping_error().
This patch creates a new function in niu_ops to test if the mapping
failed. The test is fixed in niu_rbr_add_page(), added in
niu_start_xmit() and the successfully mapped pages are unmaped upon error.
Fixes: ec2deec1f3 ("niu: Fix to check for dma mapping errors.")
Signed-off-by: Thomas Fourier <fourier.thomas@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Many error paths in tlmi_sysfs_init() lead to sysfs groups being removed
when they were not even created.
Fix this by letting the kobject core manage these groups through their
kobj_type's defult_groups.
Fixes: a40cd7ef22 ("platform/x86: think-lmi: Add WMI interface support on Lenovo platforms")
Cc: stable@vger.kernel.org
Reviewed-by: Mark Pearson <mpearson-lenovo@squebb.ca>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Kurt Borja <kuurtb@gmail.com>
Link: https://lore.kernel.org/r/20250630-lmi-fix-v3-3-ce4f81c9c481@gmail.com
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
In tlmi_analyze(), allocated structs with an embedded kobject are freed
in error paths after the they were already initialized.
Fix this by first by avoiding the initialization of kobjects in
tlmi_analyze() and then by correctly cleaning them up in
tlmi_release_attr() using their kset's kobject list.
Fixes: a40cd7ef22 ("platform/x86: think-lmi: Add WMI interface support on Lenovo platforms")
Fixes: 30e78435d3 ("platform/x86: think-lmi: Split kobject_init() and kobject_add() calls")
Cc: stable@vger.kernel.org
Reviewed-by: Mark Pearson <mpearson-lenovo@squebb.ca>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Kurt Borja <kuurtb@gmail.com>
Link: https://lore.kernel.org/r/20250630-lmi-fix-v3-2-ce4f81c9c481@gmail.com
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Avoid entering tlmi_release_attr() in error paths if both ksets are not
yet created.
This is accomplished by initializing them side by side.
Reviewed-by: Mark Pearson <mpearson-lenovo@squebb.ca>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Cc: stable@vger.kernel.org
Signed-off-by: Kurt Borja <kuurtb@gmail.com>
Link: https://lore.kernel.org/r/20250630-lmi-fix-v3-1-ce4f81c9c481@gmail.com
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
A GEM handle can be released while the GEM buffer object is attached
to a DRM framebuffer. This leads to the release of the dma-buf backing
the buffer object, if any. [1] Trying to use the framebuffer in further
mode-setting operations leads to a segmentation fault. Most easily
happens with driver that use shadow planes for vmap-ing the dma-buf
during a page flip. An example is shown below.
[ 156.791968] ------------[ cut here ]------------
[ 156.796830] WARNING: CPU: 2 PID: 2255 at drivers/dma-buf/dma-buf.c:1527 dma_buf_vmap+0x224/0x430
[...]
[ 156.942028] RIP: 0010:dma_buf_vmap+0x224/0x430
[ 157.043420] Call Trace:
[ 157.045898] <TASK>
[ 157.048030] ? show_trace_log_lvl+0x1af/0x2c0
[ 157.052436] ? show_trace_log_lvl+0x1af/0x2c0
[ 157.056836] ? show_trace_log_lvl+0x1af/0x2c0
[ 157.061253] ? drm_gem_shmem_vmap+0x74/0x710
[ 157.065567] ? dma_buf_vmap+0x224/0x430
[ 157.069446] ? __warn.cold+0x58/0xe4
[ 157.073061] ? dma_buf_vmap+0x224/0x430
[ 157.077111] ? report_bug+0x1dd/0x390
[ 157.080842] ? handle_bug+0x5e/0xa0
[ 157.084389] ? exc_invalid_op+0x14/0x50
[ 157.088291] ? asm_exc_invalid_op+0x16/0x20
[ 157.092548] ? dma_buf_vmap+0x224/0x430
[ 157.096663] ? dma_resv_get_singleton+0x6d/0x230
[ 157.101341] ? __pfx_dma_buf_vmap+0x10/0x10
[ 157.105588] ? __pfx_dma_resv_get_singleton+0x10/0x10
[ 157.110697] drm_gem_shmem_vmap+0x74/0x710
[ 157.114866] drm_gem_vmap+0xa9/0x1b0
[ 157.118763] drm_gem_vmap_unlocked+0x46/0xa0
[ 157.123086] drm_gem_fb_vmap+0xab/0x300
[ 157.126979] drm_atomic_helper_prepare_planes.part.0+0x487/0xb10
[ 157.133032] ? lockdep_init_map_type+0x19d/0x880
[ 157.137701] drm_atomic_helper_commit+0x13d/0x2e0
[ 157.142671] ? drm_atomic_nonblocking_commit+0xa0/0x180
[ 157.147988] drm_mode_atomic_ioctl+0x766/0xe40
[...]
[ 157.346424] ---[ end trace 0000000000000000 ]---
Acquiring GEM handles for the framebuffer's GEM buffer objects prevents
this from happening. The framebuffer's cleanup later puts the handle
references.
Commit 1a148af060 ("drm/gem-shmem: Use dma_buf from GEM object
instance") triggers the segmentation fault easily by using the dma-buf
field more widely. The underlying issue with reference counting has
been present before.
v2:
- acquire the handle instead of the BO (Christian)
- fix comment style (Christian)
- drop the Fixes tag (Christian)
- rename err_ gotos
- add missing Link tag
Suggested-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://elixir.bootlin.com/linux/v6.15/source/drivers/gpu/drm/drm_gem.c#L241 # [1]
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Anusha Srivatsa <asrivats@redhat.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: Sumit Semwal <sumit.semwal@linaro.org>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: linux-media@vger.kernel.org
Cc: dri-devel@lists.freedesktop.org
Cc: linaro-mm-sig@lists.linaro.org
Cc: <stable@vger.kernel.org>
Reviewed-by: Christian König <christian.koenig@amd.com>
Link: https://lore.kernel.org/r/20250630084001.293053-1-tzimmermann@suse.de
There are two bugs in rose_rt_device_down() that can cause
use-after-free:
1. The loop bound `t->count` is modified within the loop, which can
cause the loop to terminate early and miss some entries.
2. When removing an entry from the neighbour array, the subsequent entries
are moved up to fill the gap, but the loop index `i` is still
incremented, causing the next entry to be skipped.
For example, if a node has three neighbours (A, A, B) with count=3 and A
is being removed, the second A is not checked.
i=0: (A, A, B) -> (A, B) with count=2
^ checked
i=1: (A, B) -> (A, B) with count=2
^ checked (B, not A!)
i=2: (doesn't occur because i < count is false)
This leaves the second A in the array with count=2, but the rose_neigh
structure has been freed. Code that accesses these entries assumes that
the first `count` entries are valid pointers, causing a use-after-free
when it accesses the dangling pointer.
Fix both issues by iterating over the array in reverse order with a fixed
loop bound. This ensures that all entries are examined and that the removal
of an entry doesn't affect subsequent iterations.
Reported-by: syzbot+e04e2c007ba2c80476cb@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=e04e2c007ba2c80476cb
Tested-by: syzbot+e04e2c007ba2c80476cb@syzkaller.appspotmail.com
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Signed-off-by: Kohei Enju <enjuk@amazon.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250629030833.6680-1-enjuk@amazon.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The comparison in enic_change_mtu() incorrectly used the current
netdev->mtu instead of the new new_mtu value when warning about
an MTU exceeding the port MTU. This could suppress valid warnings
or issue incorrect ones.
Fix the condition and log to properly reflect the new_mtu.
Fixes: ab123fe071 ("enic: handle mtu change for vf properly")
Signed-off-by: Alok Tiwari <alok.a.tiwari@oracle.com>
Acked-by: John Daley <johndale@cisco.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250628145612.476096-1-alok.a.tiwari@oracle.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Update the Clause 37 Auto-Negotiation implementation to properly align
with the PCS hardware specifications:
- Fix incorrect bit settings in Link Status and Link Duplex fields
- Implement missing sequence steps 2 and 7
These changes ensure CL37 auto-negotiation protocol follows the exact
sequence patterns as specified in the hardware databook.
Fixes: 1bf40ada62 ("amd-xgbe: Add support for clause 37 auto-negotiation")
Signed-off-by: Raju Rangoju <Raju.Rangoju@amd.com>
Link: https://patch.msgid.link/20250630192636.3838291-1-Raju.Rangoju@amd.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Smatch complains that the error message isn't set in the caller:
lib/test_objagg.c:923 test_hints_case2()
error: uninitialized symbol 'errmsg'.
This static checker warning only showed up after a recent refactoring
but the bug dates back to when the code was originally added. This
likely doesn't affect anything in real life.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/r/202506281403.DsuyHFTZ-lkp@intel.com/
Fixes: 0a020d416d ("lib: introduce initial implementation of object aggregation manager")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/8548f423-2e3b-4bb7-b816-5041de2762aa@sabinyo.mountain
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add an option for completely disabling casefolding on a filesystem, as a
workaround for overlayfs.
This should only be needed as a temporary workaround, until the
overlayfs fix arrives.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Don't mark btree nodes for rewrites, if they are or would be degraded,
if journal replay hasn't finished, to avoid a deadlock.
This is because btree node rewrites generate more updates for the
interior updates (alloc, backpointers), and if those updates touch
new nodes and generate more rewrites - we can only have so many interior
btree updates in flight before we deadlock on open_buckets.
The biggest cause is that we don't use the btree write buffer (for
the backpointer updates - this needs some real thought on locking in
order to fix.
The problem with this workaround (not doing the rewrite for degraded
nodes in journal replay) is that those degraded nodes persist, and we
don't want that (this is a real bug when a btree node write completes
with fewer replicas than we wanted and leaves a degraded node due to
device _removal_, i.e. the device went away mid write).
It's less of a bug here, but still a problem because we don't yet
have a way of tracking degraded data - we another index (all
extents/btree nodes, by replicas entry) in order to fix properly
(re-replicate degraded data at the earliest possible time).
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
A small race exists between spsc_queue_push and the run-job worker, in
which spsc_queue_push may return not-first while the run-job worker has
already idled due to the job count being zero. If this race occurs, job
scheduling stops, leading to hangs while waiting on the job’s DMA
fences.
Seal this race by incrementing the job count before appending to the
SPSC queue.
This race was observed on a drm-tip 6.16-rc1 build with the Xe driver in
an SVM test case.
Fixes: 1b1f42d8fd ("drm: move amd_gpu_scheduler into common location")
Fixes: 27105db6c6 ("drm/amdgpu: Add SPSC queue to scheduler.")
Cc: stable@vger.kernel.org
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Jonathan Cavitt <jonathan.cavitt@intel.com>
Link: https://lore.kernel.org/r/20250613212013.719312-1-matthew.brost@intel.com
Fix Kconfig symbol dependency on KUNIT, which isn't actually required
for XE to be built-in. However, if KUNIT is enabled, it must be built-in
too.
Fixes: 08987a8b68 ("drm/xe: Fix build with KUNIT=m")
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Harry Austen <hpausten@protonmail.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Tested-by: Randy Dunlap <rdunlap@infradead.org>
Link: https://lore.kernel.org/r/20250627-xe-kunit-v2-2-756fe5cd56cf@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
(cherry picked from commit a559434880)
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
The xe driver is the official driver for Intel Xe2 and later, while
maintaining experimental support for earlier GPUs. Reword the help
message accordingly.
Reviewed-by: Maarten Lankhorst <dev@lankhorst.se>
Link: https://lore.kernel.org/r/20250611-xe-kconfig-help-v1-1-8bcc6b47d11a@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
(cherry picked from commit 1488a3089d)
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Limit GT max frequency to 2600MHz and wait for frequency to reduce
before proceeding with a transient flush. This is really only needed for
the transient flush: if L2 flush is needed due to 16023588340 then
there's no need to do this additional wait since we are already using
the bigger hammer.
v2: Use generic names, ensure user set max frequency requests wait
for flush to complete (Rodrigo)
v3:
- User requests wait via wait_var_event_timeout (Lucas)
- Close races on flush + user requests (Lucas)
- Fix xe_guc_pc_remove_flush_freq_limit() being called on last gt
rather than root gt (Lucas)
v4:
- Only apply the freq reducing part if a TDF is needed: L2 flush trumps
the need for waiting a lower frequency
Fixes: aaa08078e7 ("drm/xe/bmg: Apply Wa_22019338487")
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Vinay Belgaumkar <vinay.belgaumkar@intel.com>
Link: https://lore.kernel.org/r/20250618-wa-22019338487-v5-4-b888388477f2@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
(cherry picked from commit deea6a7d6d)
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Set GT min frequency to 1200Mhz once driver load is complete.
v2: Review comments (Rodrigo)
v3: Apply Wa earlier so user_req_min is not clobbered.
v4: Apply to all GTs (Lucas)
Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Vinay Belgaumkar <vinay.belgaumkar@intel.com>
Reviewed-by: Stuart Summers <stuart.summers@intel.com>
Link: https://lore.kernel.org/r/20250612-wa-14022085890-v4-3-94ba5dcc1e30@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
(cherry picked from commit bdde16c9ac)
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
xe_device_td_flush() has 2 possible implementations: an entire L2 flush
or a transient flush, depending on WA 16023588340. Make this clear by
splitting the function so it calls each of them.
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://lore.kernel.org/r/20250618-wa-22019338487-v5-3-b888388477f2@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
(cherry picked from commit 5e300ed8a5)
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
pc_set_mert_freq_cap() currently lock()/unlock() the mutex multiple times
to stash the current frequencies. It's not a problem since
xe_guc_pc_restore_stashed_freq() is guaranteed to be called only later
in the init sequence. However, now that we have _locked() variants for
this functions, use them and avoid potential issues when called from
other places or using the same pattern.
While at it, prefer and early return for the WA check to reduce
indentation.
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://lore.kernel.org/r/20250618-wa-22019338487-v5-2-b888388477f2@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
(cherry picked from commit d878c97daa)
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
There are places in which the getters/setters are called one after the
other causing a multiple lock()/unlock(). These are not currently a
problem since they are all happening from the same thread, but there's a
race possibility as calls are added outside of the early init when the
max/min and stashed values need to be correlated.
Add the _locked() variants to prepare for that.
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://lore.kernel.org/r/20250618-wa-22019338487-v5-1-b888388477f2@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
(cherry picked from commit 1beae9aa2b)
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
No idea why, but without this GuC context switches randomly fail when
running IGTs in a loop. Need to follow up why this fixes the
aforementioned issue but can live with a stable driver for now.
Fixes: 617d824c53 ("drm/xe: Add WA BB to capture active context utilization")
Cc: stable@vger.kernel.org
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Tested-by: Shuicheng Lin <shuicheng.lin@intel.com>
Link: https://lore.kernel.org/r/20250612031925.4009701-1-matthew.brost@intel.com
(cherry picked from commit 3a1edef8f4)
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
* Fix loop in GSS sequence number cache
* Clean up /proc/net/rpc/nfs if nfs_fs_proc_net_init() fails
* Fix a race to wake on NFS_LAYOUT_DRAIN
* Fix handling of NFS level errors in I/O
-----BEGIN PGP SIGNATURE-----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=F4+b
-----END PGP SIGNATURE-----
Merge tag 'nfs-for-6.16-2' of git://git.linux-nfs.org/projects/anna/linux-nfs
Pull NFS client fixes from Anna Schumaker:
- Fix loop in GSS sequence number cache
- Clean up /proc/net/rpc/nfs if nfs_fs_proc_net_init() fails
- Fix a race to wake on NFS_LAYOUT_DRAIN
- Fix handling of NFS level errors in I/O
* tag 'nfs-for-6.16-2' of git://git.linux-nfs.org/projects/anna/linux-nfs:
NFSv4/flexfiles: Fix handling of NFS level errors in I/O
NFSv4/pNFS: Fix a race to wake on NFS_LAYOUT_DRAIN
nfs: Clean up /proc/net/rpc/nfs when nfs_fs_proc_net_init() fails.
sunrpc: fix loop in gss seqno cache
David Howells <dhowells@redhat.com> says:
Here are some miscellaneous fixes and changes for netfslib and cifs, if you
could consider pulling them.
Many of these were found because a bug in Samba was causing smbd to crash
and restart after about 1-2s and this was vigorously and abruptly
exercising the netfslib retry paths.
Subsequent testing of the cifs RDMA support showed up some more bugs, but
the fixes for those went via the cifs tree and have been removed from this set
as they're now upstream.
First, there are some netfs fixes:
(1) Fix a hang due to missing case in final DIO read result collection
not breaking out of a loop if the request finished, but there were no
subrequests being processed and NETFS_RREQ_ALL_QUEUED wasn't yet set.
(2) Fix a double put of the netfs_io_request struct if completion happened
in the pause loop.
(3) Provide some helpers to abstract out NETFS_RREQ_IN_PROGRESS flag
wrangling.
(4) Fix infinite looping in netfs_wait_for_pause/request() which wa caused
by a loop waiting for NETFS_RREQ_ALL_QUEUED to get set - but which
wouldn't get set until the looping function returned. This uses patch
(3) above.
(5) Fix a ref leak on an extra subrequest inserted into a request's list
of subreqs because more subreq records were needed for retrying than
were needed for the original request (say, for instance, that the
amount of cifs credit available was reduced and, subsequently, the ops
had to be smaller).
Then a bunch of cifs fixes, some of which are from other people:
(6-8) cifs: Fix various RPC callbacks to set NETFS_SREQ_NEED_RETRY if a
subrequest fails retriably.
(10) Fix a warning in the workqueue code when reconnecting a channel.
Followed by some patches to deal with i_size handling:
(11) Fix the updating of i_size to use a lock to avoid a race between
testing if we should have extended the file with a DIO write and
changing i_size.
(12) A follow-up patch to (11) to merge the places in netfslib that update
i_size on write.
And finally a couple of patches to improve tracing output, but that should
otherwise not affect functionality:
(13) Renumber the NETFS_RREQ_* flags to make the hex values easier to
interpret by eye, including moving the main status flags down to the
lowest bits, with IN_PROGRESS in bit 0.
(14) Update the tracepoints in a number of ways, including adding more
tracepoints into the cifs read/write RPC callback so that differend
MID_RESPONSE_* values can be differentiated.
* patches from https://lore.kernel.org/20250701163852.2171681-1-dhowells@redhat.com:
netfs: Update tracepoints in a number of ways
netfs: Renumber the NETFS_RREQ_* flags to make traces easier to read
netfs: Merge i_size update functions
netfs: Fix i_size updating
smb: client: set missing retry flag in cifs_writev_callback()
smb: client: set missing retry flag in cifs_readv_callback()
smb: client: set missing retry flag in smb2_writev_callback()
netfs: Fix ref leak on inserted extra subreq in write retry
netfs: Fix looping in wait functions
netfs: Provide helpers to perform NETFS_RREQ_IN_PROGRESS flag wangling
netfs: Fix double put of request
netfs: Fix hang due to missing case in final DIO read result collection
Link: https://lore.kernel.org/20250701163852.2171681-1-dhowells@redhat.com
Signed-off-by: Christian Brauner <brauner@kernel.org>
Make a number of updates to the netfs tracepoints:
(1) Remove a duplicate trace from netfs_unbuffered_write_iter_locked().
(2) Move the trace in netfs_wake_rreq_flag() to after the flag is cleared
so that the change appears in the trace.
(3) Differentiate the use of netfs_rreq_trace_wait/woke_queue symbols.
(4) Don't do so many trace emissions in the wait functions as some of them
are redundant.
(5) In netfs_collect_read_results(), differentiate a subreq that's being
abandoned vs one that has been consumed in a regular way.
(6) Add a tracepoint to indicate the call to ->ki_complete().
(7) Don't double-increment the subreq_counter when retrying a write.
(8) Move the netfs_sreq_trace_io_progress tracepoint within cifs code to
just MID_RESPONSE_RECEIVED and add different tracepoints for other MID
states and note check failure.
Signed-off-by: David Howells <dhowells@redhat.com>
Co-developed-by: Paulo Alcantara <pc@manguebit.org>
Signed-off-by: Paulo Alcantara <pc@manguebit.org>
Link: https://lore.kernel.org/20250701163852.2171681-14-dhowells@redhat.com
cc: Steve French <sfrench@samba.org>
cc: netfs@lists.linux.dev
cc: linux-fsdevel@vger.kernel.org
cc: linux-cifs@vger.kernel.org
Signed-off-by: Christian Brauner <brauner@kernel.org>
Renumber the NETFS_RREQ_* flags to put the most useful status bits in the
bottom nibble - and therefore the last hex digit in the trace output -
making it easier to grasp the state at a glance.
In particular, put the IN_PROGRESS flag in bit 0 and ALL_QUEUED at bit 1.
Also make the flags field in /proc/fs/netfs/requests larger to accommodate
all the flags.
Also make the flags field in the netfs_sreq tracepoint larger to
accommodate all the NETFS_SREQ_* flags.
Signed-off-by: David Howells <dhowells@redhat.com>
Link: https://lore.kernel.org/20250701163852.2171681-13-dhowells@redhat.com
Reviewed-by: Paulo Alcantara <pc@manguebit.org>
cc: netfs@lists.linux.dev
cc: linux-fsdevel@vger.kernel.org
Signed-off-by: Christian Brauner <brauner@kernel.org>
Netfslib has two functions for updating the i_size after a write: one for
buffered writes into the pagecache and one for direct/unbuffered writes.
However, what needs to be done is much the same in both cases, so merge
them together.
This does raise one question, though: should updating the i_size after a
direct write do the same estimated update of i_blocks as is done for
buffered writes.
Also get rid of the cleanup function pointer from netfs_io_request as it's
only used for direct write to update i_size; instead do the i_size setting
directly from write collection.
Signed-off-by: David Howells <dhowells@redhat.com>
Link: https://lore.kernel.org/20250701163852.2171681-12-dhowells@redhat.com
cc: Steve French <sfrench@samba.org>
cc: Paulo Alcantara <pc@manguebit.org>
cc: linux-cifs@vger.kernel.org
cc: netfs@lists.linux.dev
cc: linux-fsdevel@vger.kernel.org
Signed-off-by: Christian Brauner <brauner@kernel.org>
Fix the updating of i_size, particularly in regard to the completion of DIO
writes and especially async DIO writes by using a lock.
The bug is triggered occasionally by the generic/207 xfstest as it chucks a
bunch of AIO DIO writes at the filesystem and then checks that fstat()
returns a reasonable st_size as each completes.
The problem is that netfs is trying to do "if new_size > inode->i_size,
update inode->i_size" sort of thing but without a lock around it.
This can be seen with cifs, but shouldn't be seen with kafs because kafs
serialises modification ops on the client whereas cifs sends the requests
to the server as they're generated and lets the server order them.
Fixes: 153a9961b5 ("netfs: Implement unbuffered/DIO write support")
Signed-off-by: David Howells <dhowells@redhat.com>
Link: https://lore.kernel.org/20250701163852.2171681-11-dhowells@redhat.com
Reviewed-by: Paulo Alcantara (Red Hat) <pc@manguebit.org>
cc: Steve French <sfrench@samba.org>
cc: Paulo Alcantara <pc@manguebit.org>
cc: linux-cifs@vger.kernel.org
cc: netfs@lists.linux.dev
cc: linux-fsdevel@vger.kernel.org
Signed-off-by: Christian Brauner <brauner@kernel.org>
The write-retry algorithm will insert extra subrequests into the list if it
can't get sufficient capacity to split the range that needs to be retried
into the sequence of subrequests it currently has (for instance, if the
cifs credit pool has fewer credits available than it did when the range was
originally divided).
However, the allocator furnishes each new subreq with 2 refs and then
another is added for resubmission, causing one to be leaked.
Fix this by replacing the ref-getting line with a neutral trace line.
Fixes: 288ace2f57 ("netfs: New writeback implementation")
Signed-off-by: David Howells <dhowells@redhat.com>
Link: https://lore.kernel.org/20250701163852.2171681-6-dhowells@redhat.com
Tested-by: Steve French <sfrench@samba.org>
Reviewed-by: Paulo Alcantara <pc@manguebit.org>
cc: netfs@lists.linux.dev
cc: linux-fsdevel@vger.kernel.org
Signed-off-by: Christian Brauner <brauner@kernel.org>
netfs_wait_for_request() and netfs_wait_for_pause() can loop forever if
netfs_collect_in_app() returns 2, indicating that it wants to repeat
because the ALL_QUEUED flag isn't yet set and there are no subreqs left
that haven't been collected.
The problem is that, unless collection is offloaded (OFFLOAD_COLLECTION),
we have to return to the application thread to continue and eventually set
ALL_QUEUED after pausing to deal with a retry - but we never get there.
Fix this by inserting checks for the IN_PROGRESS and PAUSE flags as
appropriate before cycling round - and add cond_resched() for good measure.
Fixes: 2b1424cd13 ("netfs: Fix wait/wake to be consistent about the waitqueue used")
Signed-off-by: David Howells <dhowells@redhat.com>
Link: https://lore.kernel.org/20250701163852.2171681-5-dhowells@redhat.com
Tested-by: Steve French <sfrench@samba.org>
Reviewed-by: Paulo Alcantara <pc@manguebit.org>
cc: netfs@lists.linux.dev
cc: linux-fsdevel@vger.kernel.org
Signed-off-by: Christian Brauner <brauner@kernel.org>
If a netfs request finishes during the pause loop, it will have the ref
that belongs to the IN_PROGRESS flag removed at that point - however, if it
then goes to the final wait loop, that will *also* put the ref because it
sees that the IN_PROGRESS flag is clear and incorrectly assumes that this
happened when it called the collector.
In fact, since IN_PROGRESS is clear, we shouldn't call the collector again
since it's done all the cleanup, such as calling ->ki_complete().
Fix this by making netfs_collect_in_app() just return, indicating that
we're done if IN_PROGRESS is removed.
Fixes: 2b1424cd13 ("netfs: Fix wait/wake to be consistent about the waitqueue used")
Signed-off-by: David Howells <dhowells@redhat.com>
Link: https://lore.kernel.org/20250701163852.2171681-3-dhowells@redhat.com
Tested-by: Steve French <sfrench@samba.org>
Reviewed-by: Paulo Alcantara <pc@manguebit.org>
cc: Steve French <sfrench@samba.org>
cc: netfs@lists.linux.dev
cc: linux-fsdevel@vger.kernel.org
cc: linux-cifs@vger.kernel.org
Signed-off-by: Christian Brauner <brauner@kernel.org>
When doing a DIO read, if the subrequests we issue fail and cause the
request PAUSE flag to be set to put a pause on subrequest generation, we
may complete collection of the subrequests (possibly discarding them) prior
to the ALL_QUEUED flags being set.
In such a case, netfs_read_collection() doesn't see ALL_QUEUED being set
after netfs_collect_read_results() returns and will just return to the app
(the collector can be seen unpausing the generator in the trace log).
The subrequest generator can then set ALL_QUEUED and the app thread reaches
netfs_wait_for_request(). This causes netfs_collect_in_app() to be called
to see if we're done yet, but there's missing case here.
netfs_collect_in_app() will see that a thread is active and set inactive to
false, but won't see any subrequests in the read stream, and so won't set
need_collect to true. The function will then just return 0, indicating
that the caller should just sleep until further activity (which won't be
forthcoming) occurs.
Fix this by making netfs_collect_in_app() check to see if an active thread
is complete - i.e. that ALL_QUEUED is set and the subrequests list is empty
- and to skip the sleep return path. The collector will then be called
which will clear the request IN_PROGRESS flag, allowing the app to
progress.
Fixes: 2b1424cd13 ("netfs: Fix wait/wake to be consistent about the waitqueue used")
Reported-by: Steve French <sfrench@samba.org>
Signed-off-by: David Howells <dhowells@redhat.com>
Link: https://lore.kernel.org/20250701163852.2171681-2-dhowells@redhat.com
Tested-by: Steve French <sfrench@samba.org>
Reviewed-by: Paulo Alcantara <pc@manguebit.org>
cc: linux-cifs@vger.kernel.org
cc: netfs@lists.linux.dev
cc: linux-fsdevel@vger.kernel.org
Signed-off-by: Christian Brauner <brauner@kernel.org>
