add parameter of lcdc type for mcu to fix HDMI display abnormal when do ddr
change freq. it must update bl30 to rk3368bl30_v2.09.bin at the same time.
Signed-off-by: Tang Yun ping <typ@rock-chips.com>
do_blockdev_direct_IO() increments and decrements the inode
->i_dio_count for each IO operation. It does this to protect against
truncate of a file. Block devices don't need this sort of protection.
For a capable multiqueue setup, this atomic int is the only shared
state between applications accessing the device for O_DIRECT, and it
presents a scaling wall for that. In my testing, as much as 30% of
system time is spent incrementing and decrementing this value. A mixed
read/write workload improved from ~2.5M IOPS to ~9.6M IOPS, with
better latencies too. Before:
clat percentiles (usec):
| 1.00th=[ 33], 5.00th=[ 34], 10.00th=[ 34], 20.00th=[ 34],
| 30.00th=[ 34], 40.00th=[ 34], 50.00th=[ 35], 60.00th=[ 35],
| 70.00th=[ 35], 80.00th=[ 35], 90.00th=[ 37], 95.00th=[ 80],
| 99.00th=[ 98], 99.50th=[ 151], 99.90th=[ 155], 99.95th=[ 155],
| 99.99th=[ 165]
After:
clat percentiles (usec):
| 1.00th=[ 95], 5.00th=[ 108], 10.00th=[ 129], 20.00th=[ 149],
| 30.00th=[ 155], 40.00th=[ 161], 50.00th=[ 167], 60.00th=[ 171],
| 70.00th=[ 177], 80.00th=[ 185], 90.00th=[ 201], 95.00th=[ 270],
| 99.00th=[ 390], 99.50th=[ 398], 99.90th=[ 418], 99.95th=[ 422],
| 99.99th=[ 438]
In other setups, Robert Elliott reported seeing good performance
improvements:
https://lkml.org/lkml/2015/4/3/557
The more applications accessing the device, the worse it gets.
Add a new direct-io flags, DIO_SKIP_DIO_COUNT, which tells
do_blockdev_direct_IO() that it need not worry about incrementing
or decrementing the inode i_dio_count for this caller.
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Theodore Ts'o <tytso@mit.edu>
Cc: Elliott, Robert (Server Storage) <elliott@hp.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Jens Axboe <axboe@fb.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com>
Tested-and-Reviewed-by: Shawn Lin <shawn.lin@rock-chips.com>
Direct IO of filesystem had recursive searched and map the addr
itself, so mmc drivers can avoid to do the same ops in order to
improve throughput. We got 30% improvement for 4KB bs packet test.
Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com>
This commit comes from community but not upstreram.
We cannot wait for picking up such a great movement without
upstream admit it. We just take a light way to merge it and
minimize the change.
Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com>
Signed-off-by: xiaoyao <xiaoyao@rock-chips.com>
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Totally new tuning policy for rockchip mhsc
merging from upstream and sustainable experiments
conducted by massive test using tier one customers's board.
This fine ajustment might be more durable and readable.
Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com>
Signed-off-by: Xiao Yao <xiaoyao@rock-chips.com>
Test-by: Xiao Yao <xiaoyao@rock-chips.com>
We register a platform hook and restore all of our regs if platform does
need to cutoff controller's power-supply during deepsleep in period of time.
Make sure your have added "controller-power-down" property AND comment out
"keep-power-in-suspend" in related dts file.
Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com>
Signed-off-by: Xiaoyao <xiaoyao@rock-chips.com>
Reviewed-by: Chenjh <chenjh@rock-chips.com>
Tested-by: Chenjh <chenjh@rock-chips.com>
Doing a Exponential moving average per nr_running++/-- does not
guarantee a fixed sample rate which induces errors if there are lots of
threads being enqueued/dequeued from the rq (Linpack mt). Instead of
keeping track of the avg, the scheduler now keeps track of the integral
of nr_running and allows the readers to perform filtering on top.
Implemented a proper exponential moving average for the runnables
governor and a straight 100ms average for the balanced governor. Tweaked
the thresholds for the runnables governor to minimize latency. Also,
decreased sample_rate for the runnables governor to the absolute minimum
of 10msecs.
Signed-off-by: Huang, Tao <huangtao@rock-chips.com>
- tegra_cpuquiet 'no_lp' node now accepts '-1' to force LP cluster on
- when a cluster is forced the switches take place immediately without
any delay
Bug 1247636
Change-Id: I1ec07acc3cf51419a4770542c6a1c90b92e0bf66
Signed-off-by: Simo Melenius <smelenius@nvidia.com>
Reviewed-on: http://git-master/r/208772
Reviewed-by: Terje Bergstrom <tbergstrom@nvidia.com>
(cherry picked from commit ab16bbb6f581da538448d2a64e03dd272b8fb985)
Reviewed-on: http://git-master/r/210358
Userspace expects changes to happen synchronously. Implement this by waiting
with a (configureable) timeout for the action to happen.
Bug 1220065
Change-Id: I81301719707e4baf2b3aea62c38fc771ffe1205d
Signed-off-by: Peter De Schrijver <pdeschrijver@nvidia.com>
Reviewed-on: http://git-master/r/200013
Reviewed-by: Simone Willett <swillett@nvidia.com>
Tested-by: Simone Willett <swillett@nvidia.com>
Added generic busy/free notifiers that the driver can invoke to let the
governor know that it cannot process further core online/offline
requests (invoked in our case whenever we switch to the LP cluster).
Change-Id: I5e3f7f28f38806a7f87050e8d0c8d2f2cf7521aa
Signed-off-by: Sai Charan Gurrappadi <sgurrappadi@nvidia.com>
Reviewed-on: http://git-master/r/114807
Reviewed-by: Lokesh Pathak <lpathak@nvidia.com>
Tested-by: Lokesh Pathak <lpathak@nvidia.com>
commit f254e3c57b upstream.
ACPICA commit 7d9fd64397d7c38899d3dc497525f6e6b044e0e3
OSPMs like Linux expect an acpi_physical_address returning value from
acpi_find_root_pointer(). This triggers warnings if sizeof (acpi_size) doesn't
equal to sizeof (acpi_physical_address):
drivers/acpi/osl.c:275:3: warning: passing argument 1 of 'acpi_find_root_pointer' from incompatible pointer type [enabled by default]
In file included from include/acpi/acpi.h:64:0,
from include/linux/acpi.h:36,
from drivers/acpi/osl.c:41:
include/acpi/acpixf.h:433:1: note: expected 'acpi_size *' but argument is of type 'acpi_physical_address *'
This patch corrects acpi_find_root_pointer().
Link: https://github.com/acpica/acpica/commit/7d9fd643
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Dirk Behme <dirk.behme@gmail.com>
Signed-off-by: George G. Davis <george_davis@mentor.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit fc21c0cff2 upstream.
This commit was incomplete in that code to remove items from the per-cpu
lists was missing and never acquired a user in the 5 years it has been in
the tree. We're going to implement what it seems to try to archive in a
simpler way, and this code is in the way of doing so.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Cc: Jan Kara <jack@suse.cz>
Cc: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Pan Xinhui <xinhuix.pan@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit d8fd150fe3 upstream.
The range check for b-tree level parameter in nilfs_btree_root_broken()
is wrong; it accepts the case of "level == NILFS_BTREE_LEVEL_MAX" even
though the level is limited to values in the range of 0 to
(NILFS_BTREE_LEVEL_MAX - 1).
Since the level parameter is read from storage device and used to index
nilfs_btree_path array whose element count is NILFS_BTREE_LEVEL_MAX, it
can cause memory overrun during btree operations if the boundary value
is set to the level parameter on device.
This fixes the broken sanity check and adds a comment to clarify that
the upper bound NILFS_BTREE_LEVEL_MAX is exclusive.
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
add wait for lcdc hold valid when standby and add standby when
lcdc timing is changing at the moment of switch hdmi.
Signed-off-by: Wenlong Zhuang <daisen.zhuang@rockchips.com>
commit 7241ea558c upstream.
Looks like audigy emu10k2 (probably emu10k1 - sb live too) support two
modes for DMA. Second mode is useful for 64 bit os with more then 2 GB
of ram (fixes problems with big soundfont loading)
1) 32MB from 2 GB address space using 8192 pages (used now as default)
2) 16MB from 4 GB address space using 4096 pages
Mode is set using HCFG_EXPANDED_MEM flag in HCFG register.
Also format of emu10k2 page table is then different.
Signed-off-by: Peter Zubaj <pzubaj@marticonet.sk>
Tested-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
zs_get_total_size_bytes returns a amount of memory zsmalloc consumed with
*byte unit* but zsmalloc operates *page unit* rather than byte unit so
let's change the API so benefit we could get is that reduce unnecessary
overhead (ie, change page unit with byte unit) in zsmalloc.
Since return type is pages, "zs_get_total_pages" is better than
"zs_get_total_size_bytes".
Signed-off-by: Minchan Kim <minchan@kernel.org>
Reviewed-by: Dan Streetman <ddstreet@ieee.org>
Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Cc: Jerome Marchand <jmarchan@redhat.com>
Cc: <juno.choi@lge.com>
Cc: <seungho1.park@lge.com>
Cc: Luigi Semenzato <semenzato@google.com>
Cc: Nitin Gupta <ngupta@vflare.org>
Cc: Seth Jennings <sjennings@variantweb.net>
Cc: David Horner <ds2horner@gmail.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
(cherry picked from commit 722cdc1723)
Signed-off-by: Alex Shi <alex.shi@linaro.org>
Add zpool api.
zpool provides an interface for memory storage, typically of compressed
memory. Users can select what backend to use; currently the only
implementations are zbud, a low density implementation with up to two
compressed pages per storage page, and zsmalloc, a higher density
implementation with multiple compressed pages per storage page.
Signed-off-by: Dan Streetman <ddstreet@ieee.org>
Tested-by: Seth Jennings <sjennings@variantweb.net>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Nitin Gupta <ngupta@vflare.org>
Cc: Weijie Yang <weijie.yang@samsung.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
(cherry picked from commit af8d417a04)
Signed-off-by: Alex Shi <alex.shi@linaro.org>
Conflicts:
mm/Kconfig
mm/Makefile
LZ4 compression and decompression functions require different in
signedness input/output parameters: unsigned char for compression and
signed char for decompression.
Change decompression API to require "(const) unsigned char *".
Signed-off-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Cc: Kyungsik Lee <kyungsik.lee@lge.com>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Yann Collet <yann.collet.73@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
(cherry picked from commit b34081f1cd)
Signed-off-by: Alex Shi <alex.shi@linaro.org>
This patchset is for supporting LZ4 compression and the crypto API using
it.
As shown below, the size of data is a little bit bigger but compressing
speed is faster under the enabled unaligned memory access. We can use
lz4 de/compression through crypto API as well. Also, It will be useful
for another potential user of lz4 compression.
lz4 Compression Benchmark:
Compiler: ARM gcc 4.6.4
ARMv7, 1 GHz based board
Kernel: linux 3.4
Uncompressed data Size: 101 MB
Compressed Size compression Speed
LZO 72.1MB 32.1MB/s, 33.0MB/s(UA)
LZ4 75.1MB 30.4MB/s, 35.9MB/s(UA)
LZ4HC 59.8MB 2.4MB/s, 2.5MB/s(UA)
- UA: Unaligned memory Access support
- Latest patch set for LZO applied
This patch:
Add support for LZ4 compression in the Linux Kernel. LZ4 Compression APIs
for kernel are based on LZ4 implementation by Yann Collet and were changed
for kernel coding style.
LZ4 homepage : http://fastcompression.blogspot.com/p/lz4.html
LZ4 source repository : http://code.google.com/p/lz4/
svn revision : r90
Two APIs are added:
lz4_compress() support basic lz4 compression whereas lz4hc_compress()
support high compression or CPU performance get lower but compression
ratio get higher. Also, we require the pre-allocated working memory with
the defined size and destination buffer must be allocated with the size of
lz4_compressbound.
[akpm@linux-foundation.org: make lz4_compresshcctx() static]
Signed-off-by: Chanho Min <chanho.min@lge.com>
Cc: "Darrick J. Wong" <djwong@us.ibm.com>
Cc: Bob Pearson <rpearson@systemfabricworks.com>
Cc: Richard Weinberger <richard@nod.at>
Cc: Herbert Xu <herbert@gondor.hengli.com.au>
Cc: Yann Collet <yann.collet.73@gmail.com>
Cc: Kyungsik Lee <kyungsik.lee@lge.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
(cherry picked from commit c72ac7a1a9)
Signed-off-by: Alex Shi <alex.shi@linaro.org>
Add support for LZ4 decompression in the Linux Kernel. LZ4 Decompression
APIs for kernel are based on LZ4 implementation by Yann Collet.
Benchmark Results(PATCH v3)
Compiler: Linaro ARM gcc 4.6.2
1. ARMv7, 1.5GHz based board
Kernel: linux 3.4
Uncompressed Kernel Size: 14MB
Compressed Size Decompression Speed
LZO 6.7MB 20.1MB/s, 25.2MB/s(UA)
LZ4 7.3MB 29.1MB/s, 45.6MB/s(UA)
2. ARMv7, 1.7GHz based board
Kernel: linux 3.7
Uncompressed Kernel Size: 14MB
Compressed Size Decompression Speed
LZO 6.0MB 34.1MB/s, 52.2MB/s(UA)
LZ4 6.5MB 86.7MB/s
- UA: Unaligned memory Access support
- Latest patch set for LZO applied
This patch set is for adding support for LZ4-compressed Kernel. LZ4 is a
very fast lossless compression algorithm and it also features an extremely
fast decoder [1].
But we have five of decompressors already and one question which does
arise, however, is that of where do we stop adding new ones? This issue
had been discussed and came to the conclusion [2].
Russell King said that we should have:
- one decompressor which is the fastest
- one decompressor for the highest compression ratio
- one popular decompressor (eg conventional gzip)
If we have a replacement one for one of these, then it should do exactly
that: replace it.
The benchmark shows that an 8% increase in image size vs a 66% increase
in decompression speed compared to LZO(which has been known as the
fastest decompressor in the Kernel). Therefore the "fast but may not be
small" compression title has clearly been taken by LZ4 [3].
[1] http://code.google.com/p/lz4/
[2] http://thread.gmane.org/gmane.linux.kbuild.devel/9157
[3] http://thread.gmane.org/gmane.linux.kbuild.devel/9347
LZ4 homepage: http://fastcompression.blogspot.com/p/lz4.html
LZ4 source repository: http://code.google.com/p/lz4/
Signed-off-by: Kyungsik Lee <kyungsik.lee@lge.com>
Signed-off-by: Yann Collet <yann.collet.73@gmail.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Russell King <rmk@arm.linux.org.uk>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Florian Fainelli <florian@openwrt.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
(cherry picked from commit cffb78b0e0)
Signed-off-by: Alex Shi <alex.shi@linaro.org>
The following method of CPU hotplug callback registration is not safe
due to the possibility of an ABBA deadlock involving the cpu_add_remove_lock
and the cpu_hotplug.lock.
get_online_cpus();
for_each_online_cpu(cpu)
init_cpu(cpu);
register_cpu_notifier(&foobar_cpu_notifier);
put_online_cpus();
The deadlock is shown below:
CPU 0 CPU 1
----- -----
Acquire cpu_hotplug.lock
[via get_online_cpus()]
CPU online/offline operation
takes cpu_add_remove_lock
[via cpu_maps_update_begin()]
Try to acquire
cpu_add_remove_lock
[via register_cpu_notifier()]
CPU online/offline operation
tries to acquire cpu_hotplug.lock
[via cpu_hotplug_begin()]
*** DEADLOCK! ***
The problem here is that callback registration takes the locks in one order
whereas the CPU hotplug operations take the same locks in the opposite order.
To avoid this issue and to provide a race-free method to register CPU hotplug
callbacks (along with initialization of already online CPUs), introduce new
variants of the callback registration APIs that simply register the callbacks
without holding the cpu_add_remove_lock during the registration. That way,
we can avoid the ABBA scenario. However, we will need to hold the
cpu_add_remove_lock throughout the entire critical section, to protect updates
to the callback/notifier chain.
This can be achieved by writing the callback registration code as follows:
cpu_maps_update_begin(); [ or cpu_notifier_register_begin(); see below ]
for_each_online_cpu(cpu)
init_cpu(cpu);
/* This doesn't take the cpu_add_remove_lock */
__register_cpu_notifier(&foobar_cpu_notifier);
cpu_maps_update_done(); [ or cpu_notifier_register_done(); see below ]
Note that we can't use get_online_cpus() here instead of cpu_maps_update_begin()
because the cpu_hotplug.lock is dropped during the invocation of CPU_POST_DEAD
notifiers, and hence get_online_cpus() cannot provide the necessary
synchronization to protect the callback/notifier chains against concurrent
reads and writes. On the other hand, since the cpu_add_remove_lock protects
the entire hotplug operation (including CPU_POST_DEAD), we can use
cpu_maps_update_begin/done() to guarantee proper synchronization.
Also, since cpu_maps_update_begin/done() is like a super-set of
get/put_online_cpus(), the former naturally protects the critical sections
from concurrent hotplug operations.
Since the names cpu_maps_update_begin/done() don't make much sense in CPU
hotplug callback registration scenarios, we'll introduce new APIs named
cpu_notifier_register_begin/done() and map them to cpu_maps_update_begin/done().
In summary, introduce the lockless variants of un/register_cpu_notifier() and
also export the cpu_notifier_register_begin/done() APIs for use by modules.
This way, we provide a race-free way to register hotplug callbacks as well as
perform initialization for the CPUs that are already online.
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ingo Molnar <mingo@kernel.org>
Acked-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Toshi Kani <toshi.kani@hp.com>
Reviewed-by: Gautham R. Shenoy <ego@linux.vnet.ibm.com>
Signed-off-by: Srivatsa S. Bhat <srivatsa.bhat@linux.vnet.ibm.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
(cherry picked from commit 93ae4f978c)
Signed-off-by: Alex Shi <alex.shi@linaro.org>
Add my copyright to the zsmalloc source code which I maintain.
Signed-off-by: Minchan Kim <minchan@kernel.org>
Cc: Nitin Gupta <ngupta@vflare.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
(cherry picked from commit 31fc00bb78)
Signed-off-by: Alex Shi <alex.shi@linaro.org>
This patch moves zsmalloc under mm directory.
Before that, description will explain why we have needed custom
allocator.
Zsmalloc is a new slab-based memory allocator for storing compressed
pages. It is designed for low fragmentation and high allocation success
rate on large object, but <= PAGE_SIZE allocations.
zsmalloc differs from the kernel slab allocator in two primary ways to
achieve these design goals.
zsmalloc never requires high order page allocations to back slabs, or
"size classes" in zsmalloc terms. Instead it allows multiple
single-order pages to be stitched together into a "zspage" which backs
the slab. This allows for higher allocation success rate under memory
pressure.
Also, zsmalloc allows objects to span page boundaries within the zspage.
This allows for lower fragmentation than could be had with the kernel
slab allocator for objects between PAGE_SIZE/2 and PAGE_SIZE. With the
kernel slab allocator, if a page compresses to 60% of it original size,
the memory savings gained through compression is lost in fragmentation
because another object of the same size can't be stored in the leftover
space.
This ability to span pages results in zsmalloc allocations not being
directly addressable by the user. The user is given an
non-dereferencable handle in response to an allocation request. That
handle must be mapped, using zs_map_object(), which returns a pointer to
the mapped region that can be used. The mapping is necessary since the
object data may reside in two different noncontigious pages.
The zsmalloc fulfills the allocation needs for zram perfectly
[sjenning@linux.vnet.ibm.com: borrow Seth's quote]
Signed-off-by: Minchan Kim <minchan@kernel.org>
Acked-by: Nitin Gupta <ngupta@vflare.org>
Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Cc: Bob Liu <bob.liu@oracle.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Hugh Dickins <hughd@google.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Luigi Semenzato <semenzato@google.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: Rik van Riel <riel@redhat.com>
Cc: Seth Jennings <sjenning@linux.vnet.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
(cherry picked from commit bcf1647d08)
Signed-off-by: Alex Shi <alex.shi@linaro.org>
Conflicts:
drivers/staging/zsmalloc/Kconfig
mm/Kconfig
mm/Makefile
Conflicts solutions:
only move zsmalloc to mm/, skip unrelated cma/zbud/zswap
