mirror of
https://github.com/torvalds/linux.git
synced 2026-07-29 02:31:27 +02:00
962fb1f651
1368847 Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
David Howells
|
962fb1f651 |
rxrpc: Fix recv-recv race of completed call
If a call receives an event (such as incoming data), the call gets placed
on the socket's queue and a thread in recvmsg can be awakened to go and
process it. Once the thread has picked up the call off of the queue,
further events will cause it to be requeued, and once the socket lock is
dropped (recvmsg uses call->user_mutex to allow the socket to be used in
parallel), a second thread can come in and its recvmsg can pop the call off
the socket queue again.
In such a case, the first thread will be receiving stuff from the call and
the second thread will be blocked on call->user_mutex. The first thread
can, at this point, process both the event that it picked call for and the
event that the second thread picked the call for and may see the call
terminate - in which case the call will be "released", decoupling the call
from the user call ID assigned to it (RXRPC_USER_CALL_ID in the control
message).
The first thread will return okay, but then the second thread will wake up
holding the user_mutex and, if it sees that the call has been released by
the first thread, it will BUG thusly:
kernel BUG at net/rxrpc/recvmsg.c:474!
Fix this by just dequeuing the call and ignoring it if it is seen to be
already released. We can't tell userspace about it anyway as the user call
ID has become stale.
Fixes:
|
||
|
David Howells
|
e4d2878369 |
rxrpc: Fix irq-disabled in local_bh_enable()
The rxrpc_assess_MTU_size() function calls down into the IP layer to find
out the MTU size for a route. When accepting an incoming call, this is
called from rxrpc_new_incoming_call() which holds interrupts disabled
across the code that calls down to it. Unfortunately, the IP layer uses
local_bh_enable() which, config dependent, throws a warning if IRQs are
enabled:
WARNING: CPU: 1 PID: 5544 at kernel/softirq.c:387 __local_bh_enable_ip+0x43/0xd0
...
RIP: 0010:__local_bh_enable_ip+0x43/0xd0
...
Call Trace:
<TASK>
rt_cache_route+0x7e/0xa0
rt_set_nexthop.isra.0+0x3b3/0x3f0
__mkroute_output+0x43a/0x460
ip_route_output_key_hash+0xf7/0x140
ip_route_output_flow+0x1b/0x90
rxrpc_assess_MTU_size.isra.0+0x2a0/0x590
rxrpc_new_incoming_peer+0x46/0x120
rxrpc_alloc_incoming_call+0x1b1/0x400
rxrpc_new_incoming_call+0x1da/0x5e0
rxrpc_input_packet+0x827/0x900
rxrpc_io_thread+0x403/0xb60
kthread+0x2f7/0x310
ret_from_fork+0x2a/0x230
ret_from_fork_asm+0x1a/0x30
...
hardirqs last enabled at (23): _raw_spin_unlock_irq+0x24/0x50
hardirqs last disabled at (24): _raw_read_lock_irq+0x17/0x70
softirqs last enabled at (0): copy_process+0xc61/0x2730
softirqs last disabled at (25): rt_add_uncached_list+0x3c/0x90
Fix this by moving the call to rxrpc_assess_MTU_size() out of
rxrpc_init_peer() and further up the stack where it can be done without
interrupts disabled.
It shouldn't be a problem for rxrpc_new_incoming_call() to do it after the
locks are dropped as pmtud is going to be performed by the I/O thread - and
we're in the I/O thread at this point.
Fixes:
|
||
|
William Liu
|
88b06e4fb4 |
selftests/tc-testing: Test htb_dequeue_tree with deactivation and row emptying
Ensure that any deactivation and row emptying that occurs during htb_dequeue_tree does not cause a kernel panic. This scenario originally triggered a kernel BUG_ON, and we are checking for a graceful fail now. Signed-off-by: William Liu <will@willsroot.io> Signed-off-by: Savino Dicanosa <savy@syst3mfailure.io> Link: https://patch.msgid.link/20250717022912.221426-1-will@willsroot.io Signed-off-by: Jakub Kicinski <kuba@kernel.org> |
||
|
William Liu
|
0e1d5d9b5c |
net/sched: Return NULL when htb_lookup_leaf encounters an empty rbtree
htb_lookup_leaf has a BUG_ON that can trigger with the following:
tc qdisc del dev lo root
tc qdisc add dev lo root handle 1: htb default 1
tc class add dev lo parent 1: classid 1:1 htb rate 64bit
tc qdisc add dev lo parent 1:1 handle 2: netem
tc qdisc add dev lo parent 2:1 handle 3: blackhole
ping -I lo -c1 -W0.001 127.0.0.1
The root cause is the following:
1. htb_dequeue calls htb_dequeue_tree which calls the dequeue handler on
the selected leaf qdisc
2. netem_dequeue calls enqueue on the child qdisc
3. blackhole_enqueue drops the packet and returns a value that is not
just NET_XMIT_SUCCESS
4. Because of this, netem_dequeue calls qdisc_tree_reduce_backlog, and
since qlen is now 0, it calls htb_qlen_notify -> htb_deactivate ->
htb_deactiviate_prios -> htb_remove_class_from_row -> htb_safe_rb_erase
5. As this is the only class in the selected hprio rbtree,
__rb_change_child in __rb_erase_augmented sets the rb_root pointer to
NULL
6. Because blackhole_dequeue returns NULL, netem_dequeue returns NULL,
which causes htb_dequeue_tree to call htb_lookup_leaf with the same
hprio rbtree, and fail the BUG_ON
The function graph for this scenario is shown here:
0) | htb_enqueue() {
0) + 13.635 us | netem_enqueue();
0) 4.719 us | htb_activate_prios();
0) # 2249.199 us | }
0) | htb_dequeue() {
0) 2.355 us | htb_lookup_leaf();
0) | netem_dequeue() {
0) + 11.061 us | blackhole_enqueue();
0) | qdisc_tree_reduce_backlog() {
0) | qdisc_lookup_rcu() {
0) 1.873 us | qdisc_match_from_root();
0) 6.292 us | }
0) 1.894 us | htb_search();
0) | htb_qlen_notify() {
0) 2.655 us | htb_deactivate_prios();
0) 6.933 us | }
0) + 25.227 us | }
0) 1.983 us | blackhole_dequeue();
0) + 86.553 us | }
0) # 2932.761 us | qdisc_warn_nonwc();
0) | htb_lookup_leaf() {
0) | BUG_ON();
------------------------------------------
The full original bug report can be seen here [1].
We can fix this just by returning NULL instead of the BUG_ON,
as htb_dequeue_tree returns NULL when htb_lookup_leaf returns
NULL.
[1] https://lore.kernel.org/netdev/pF5XOOIim0IuEfhI-SOxTgRvNoDwuux7UHKnE_Y5-zVd4wmGvNk2ceHjKb8ORnzw0cGwfmVu42g9dL7XyJLf1NEzaztboTWcm0Ogxuojoeo=@willsroot.io/
Fixes:
|
||
|
Joseph Huang
|
683dc24da8 |
net: bridge: Do not offload IGMP/MLD messages
Do not offload IGMP/MLD messages as it could lead to IGMP/MLD Reports
being unintentionally flooded to Hosts. Instead, let the bridge decide
where to send these IGMP/MLD messages.
Consider the case where the local host is sending out reports in response
to a remote querier like the following:
mcast-listener-process (IP_ADD_MEMBERSHIP)
\
br0
/ \
swp1 swp2
| |
QUERIER SOME-OTHER-HOST
In the above setup, br0 will want to br_forward() reports for
mcast-listener-process's group(s) via swp1 to QUERIER; but since the
source hwdom is 0, the report is eligible for tx offloading, and is
flooded by hardware to both swp1 and swp2, reaching SOME-OTHER-HOST as
well. (Example and illustration provided by Tobias.)
Fixes:
|
||
|
Jakub Kicinski
|
9bb8a9f6ea |
Merge branch 'net-vlan-fix-vlan-0-refcount-imbalance-of-toggling-filtering-during-runtime'
Dong Chenchen says: ==================== net: vlan: fix VLAN 0 refcount imbalance of toggling filtering during runtime Fix VLAN 0 refcount imbalance of toggling filtering during runtime. ==================== Link: https://patch.msgid.link/20250716034504.2285203-1-dongchenchen2@huawei.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> |
||
|
Dong Chenchen
|
e0f3b3e5c7 |
selftests: Add test cases for vlan_filter modification during runtime
Add test cases for vlan_filter modification during runtime, which may triger null-ptr-ref or memory leak of vlan0. Signed-off-by: Dong Chenchen <dongchenchen2@huawei.com> Link: https://patch.msgid.link/20250716034504.2285203-3-dongchenchen2@huawei.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> |
||
|
Dong Chenchen
|
579d4f9ca9 |
net: vlan: fix VLAN 0 refcount imbalance of toggling filtering during runtime
Assuming the "rx-vlan-filter" feature is enabled on a net device, the
8021q module will automatically add or remove VLAN 0 when the net device
is put administratively up or down, respectively. There are a couple of
problems with the above scheme.
The first problem is a memory leak that can happen if the "rx-vlan-filter"
feature is disabled while the device is running:
# ip link add bond1 up type bond mode 0
# ethtool -K bond1 rx-vlan-filter off
# ip link del dev bond1
When the device is put administratively down the "rx-vlan-filter"
feature is disabled, so the 8021q module will not remove VLAN 0 and the
memory will be leaked [1].
Another problem that can happen is that the kernel can automatically
delete VLAN 0 when the device is put administratively down despite not
adding it when the device was put administratively up since during that
time the "rx-vlan-filter" feature was disabled. null-ptr-unref or
bug_on[2] will be triggered by unregister_vlan_dev() for refcount
imbalance if toggling filtering during runtime:
$ ip link add bond0 type bond mode 0
$ ip link add link bond0 name vlan0 type vlan id 0 protocol 802.1q
$ ethtool -K bond0 rx-vlan-filter off
$ ifconfig bond0 up
$ ethtool -K bond0 rx-vlan-filter on
$ ifconfig bond0 down
$ ip link del vlan0
Root cause is as below:
step1: add vlan0 for real_dev, such as bond, team.
register_vlan_dev
vlan_vid_add(real_dev,htons(ETH_P_8021Q),0) //refcnt=1
step2: disable vlan filter feature and enable real_dev
step3: change filter from 0 to 1
vlan_device_event
vlan_filter_push_vids
ndo_vlan_rx_add_vid //No refcnt added to real_dev vlan0
step4: real_dev down
vlan_device_event
vlan_vid_del(dev, htons(ETH_P_8021Q), 0); //refcnt=0
vlan_info_rcu_free //free vlan0
step5: delete vlan0
unregister_vlan_dev
BUG_ON(!vlan_info); //vlan_info is null
Fix both problems by noting in the VLAN info whether VLAN 0 was
automatically added upon NETDEV_UP and based on that decide whether it
should be deleted upon NETDEV_DOWN, regardless of the state of the
"rx-vlan-filter" feature.
[1]
unreferenced object 0xffff8880068e3100 (size 256):
comm "ip", pid 384, jiffies 4296130254
hex dump (first 32 bytes):
00 20 30 0d 80 88 ff ff 00 00 00 00 00 00 00 00 . 0.............
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
backtrace (crc 81ce31fa):
__kmalloc_cache_noprof+0x2b5/0x340
vlan_vid_add+0x434/0x940
vlan_device_event.cold+0x75/0xa8
notifier_call_chain+0xca/0x150
__dev_notify_flags+0xe3/0x250
rtnl_configure_link+0x193/0x260
rtnl_newlink_create+0x383/0x8e0
__rtnl_newlink+0x22c/0xa40
rtnl_newlink+0x627/0xb00
rtnetlink_rcv_msg+0x6fb/0xb70
netlink_rcv_skb+0x11f/0x350
netlink_unicast+0x426/0x710
netlink_sendmsg+0x75a/0xc20
__sock_sendmsg+0xc1/0x150
____sys_sendmsg+0x5aa/0x7b0
___sys_sendmsg+0xfc/0x180
[2]
kernel BUG at net/8021q/vlan.c:99!
Oops: invalid opcode: 0000 [#1] SMP KASAN PTI
CPU: 0 UID: 0 PID: 382 Comm: ip Not tainted 6.16.0-rc3 #61 PREEMPT(voluntary)
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996),
BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014
RIP: 0010:unregister_vlan_dev (net/8021q/vlan.c:99 (discriminator 1))
RSP: 0018:ffff88810badf310 EFLAGS: 00010246
RAX: 0000000000000000 RBX: ffff88810da84000 RCX: ffffffffb47ceb9a
RDX: dffffc0000000000 RSI: 0000000000000008 RDI: ffff88810e8b43c8
RBP: 0000000000000000 R08: 0000000000000000 R09: fffffbfff6cefe80
R10: ffffffffb677f407 R11: ffff88810badf3c0 R12: ffff88810e8b4000
R13: 0000000000000000 R14: ffff88810642a5c0 R15: 000000000000017e
FS: 00007f1ff68c20c0(0000) GS:ffff888163a24000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007f1ff5dad240 CR3: 0000000107e56000 CR4: 00000000000006f0
Call Trace:
<TASK>
rtnl_dellink (net/core/rtnetlink.c:3511 net/core/rtnetlink.c:3553)
rtnetlink_rcv_msg (net/core/rtnetlink.c:6945)
netlink_rcv_skb (net/netlink/af_netlink.c:2535)
netlink_unicast (net/netlink/af_netlink.c:1314 net/netlink/af_netlink.c:1339)
netlink_sendmsg (net/netlink/af_netlink.c:1883)
____sys_sendmsg (net/socket.c:712 net/socket.c:727 net/socket.c:2566)
___sys_sendmsg (net/socket.c:2622)
__sys_sendmsg (net/socket.c:2652)
do_syscall_64 (arch/x86/entry/syscall_64.c:63 arch/x86/entry/syscall_64.c:94)
Fixes:
|
||
|
Jakub Kicinski
|
afb5bef57f |
This bugfix batch includes the following changes:
* properly propagate sk mark to skb->mark field * reject unexpected incoming netlink attributes * reset GSO state when moving skb from transport to tunnel layer -----BEGIN PGP SIGNATURE----- iHUEABYIAB0WIQQKU153ubb5unbkl6Gx/ZpNW1HNdwUCaHePkQAKCRCx/ZpNW1HN d+7uAP0bKyUDUq5Yl3pfHyuzlHK5f4BIEGU80J7ZzvAU8MdJXQD/c74DQ2ctbBzD nRJurcZq/hhnt+lhGx7KRT9kQyRb/gY= =q5Oy -----END PGP SIGNATURE----- Merge tag 'ovpn-net-20250716' of https://github.com/OpenVPN/ovpn-net-next Antonio Quartulli says: ==================== This bugfix batch includes the following changes: * properly propagate sk mark to skb->mark field * reject unexpected incoming netlink attributes * reset GSO state when moving skb from transport to tunnel layer * tag 'ovpn-net-20250716' of https://github.com/OpenVPN/ovpn-net-next: ovpn: reset GSO metadata after decapsulation ovpn: reject unexpected netlink attributes ovpn: propagate socket mark to skb in UDP ==================== Link: https://patch.msgid.link/20250716115443.16763-1-antonio@openvpn.net Signed-off-by: Jakub Kicinski <kuba@kernel.org> |
||
|
Jakub Kicinski
|
4ab26bce39 |
tls: always refresh the queue when reading sock
After recent changes in net-next TCP compacts skbs much more
aggressively. This unearthed a bug in TLS where we may try
to operate on an old skb when checking if all skbs in the
queue have matching decrypt state and geometry.
BUG: KASAN: slab-use-after-free in tls_strp_check_rcv+0x898/0x9a0 [tls]
(net/tls/tls_strp.c:436 net/tls/tls_strp.c:530 net/tls/tls_strp.c:544)
Read of size 4 at addr ffff888013085750 by task tls/13529
CPU: 2 UID: 0 PID: 13529 Comm: tls Not tainted 6.16.0-rc5-virtme
Call Trace:
kasan_report+0xca/0x100
tls_strp_check_rcv+0x898/0x9a0 [tls]
tls_rx_rec_wait+0x2c9/0x8d0 [tls]
tls_sw_recvmsg+0x40f/0x1aa0 [tls]
inet_recvmsg+0x1c3/0x1f0
Always reload the queue, fast path is to have the record in the queue
when we wake, anyway (IOW the path going down "if !strp->stm.full_len").
Fixes:
|
||
|
Zigit Zo
|
be5dcaed69 |
virtio-net: fix recursived rtnl_lock() during probe()
The deadlock appears in a stack trace like:
virtnet_probe()
rtnl_lock()
virtio_config_changed_work()
netdev_notify_peers()
rtnl_lock()
It happens if the VMM sends a VIRTIO_NET_S_ANNOUNCE request while the
virtio-net driver is still probing.
The config_work in probe() will get scheduled until virtnet_open() enables
the config change notification via virtio_config_driver_enable().
Fixes:
|
||
|
Maor Gottlieb
|
ad4f6df4f3 |
net/mlx5: Update the list of the PCI supported devices
Add the upcoming ConnectX-10 device ID to the table of supported PCI device IDs. Cc: stable@vger.kernel.org Signed-off-by: Maor Gottlieb <maorg@nvidia.com> Reviewed-by: Mark Bloch <mbloch@nvidia.com> Reviewed-by: Eran Ben Elisha <eranbe@nvidia.com> Signed-off-by: Tariq Toukan <tariqt@nvidia.com> Link: https://patch.msgid.link/1752650969-148501-1-git-send-email-tariqt@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> |
||
|
Li Tian
|
d7501e076d |
hv_netvsc: Set VF priv_flags to IFF_NO_ADDRCONF before open to prevent IPv6 addrconf
Set an additional flag IFF_NO_ADDRCONF to prevent ipv6 addrconf.
Commit under Fixes added a new flag change that was not made
to hv_netvsc resulting in the VF being assinged an IPv6.
Fixes:
|
||
|
Nathan Chancellor
|
17ba793f38 |
phonet/pep: Move call to pn_skb_get_dst_sockaddr() earlier in pep_sock_accept()
A new warning in clang [1] points out a place in pep_sock_accept() where
dst is uninitialized then passed as a const pointer to pep_find_pipe():
net/phonet/pep.c:829:37: error: variable 'dst' is uninitialized when passed as a const pointer argument here [-Werror,-Wuninitialized-const-pointer]
829 | newsk = pep_find_pipe(&pn->hlist, &dst, pipe_handle);
| ^~~:
Move the call to pn_skb_get_dst_sockaddr(), which initializes dst, to
before the call to pep_find_pipe(), so that dst is consistently used
initialized throughout the function.
Cc: stable@vger.kernel.org
Fixes:
|
||
|
Paolo Abeni
|
e49f95dc8c |
Couple of fixes:
- ath12k performance regression from -rc1
- cfg80211 counted_by() removal for scan request
as it doesn't match usage and keeps complaining
- iwlwifi crash with certain older devices
- iwlwifi missing an error path unlock
- iwlwifi compatibility with certain BIOS updates
-----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEEpeA8sTs3M8SN2hR410qiO8sPaAAFAmh4vwsACgkQ10qiO8sP
aAAv+w/9Fs51/x4KVnUhAK7+WtOjvFAuzQkCsVlMZplO8WnXOzUPWfZ+sOiBrMbR
ws55b4SDnO82LoeLq4MBxAMJG7P+aWK9hNbMzA6TENaWCgxvTYNEQBijGjplx8pt
0r2lpn3OP3ALluV09UnCVTVIWFL3pq/jCsGEGHVhjpRUJz9RSwmBrHFM6V7yqrzl
VIbN8k5U90L1gwQ0wf2RI/KMZwJ85zCVViYSx1wNEpfwDH0pnoy5V1bMCNaCvReh
Gca8XCmCKYP2/NSQcsoyqnz0RgjKDAsN1a8s/S/HHFea62iOpUctSg8rgc8bLfJn
bbuwuSx40Ol70kPnSii35ImTO6PRSWXpibOlA3xtjPoLprX99e7xrdm6nSbf03It
VnQtfhB5fuoBHQuPxLUeLDVl8dT4r4zbS1JQw7feUCP1Rs3IGGDLtBQHZQNE0VIr
eFkWSa4SHv5mOFrPSuyAsSviRn6O8/Ni84/hXnAf9Lh1hzfPFG4pQ+gzBNf1ZoZI
lrgNvj1xoDothTb3DzgEQwO5oxd3zFHdtOD/4DN8wH0pSOTm4obQm23b43F6t+CC
q2E8eD4BurfnBuL1zlLseo6JbSFC7LOsustgarB+q2XSPoTCmJqaOfR24Kq9ZjjN
OBE+uvTlg+/l2UjZ5lp/07XE3LSy6bWAvsl4Yy02biOiyZ0GuXU=
=yzt3
-----END PGP SIGNATURE-----
Merge tag 'wireless-2025-07-17' of https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless
Johannes Berg says:
====================
Couple of fixes:
- ath12k performance regression from -rc1
- cfg80211 counted_by() removal for scan request
as it doesn't match usage and keeps complaining
- iwlwifi crash with certain older devices
- iwlwifi missing an error path unlock
- iwlwifi compatibility with certain BIOS updates
* tag 'wireless-2025-07-17' of https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless:
wifi: iwlwifi: Fix botched indexing conversion
wifi: cfg80211: remove scan request n_channels counted_by
wifi: ath12k: Fix packets received in WBM error ring with REO LUT enabled
wifi: iwlwifi: mask reserved bits in chan_state_active_bitmap
wifi: iwlwifi: pcie: fix locking on invalid TOP reset
====================
Link: https://patch.msgid.link/20250717091831.18787-5-johannes@sipsolutions.net
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
||
|
Paolo Abeni
|
69b1b21ab9 |
netfilter pull request 25-07-17
-----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEjF9xRqF1emXiQiqU1w0aZmrPKyEFAmh4xIoACgkQ1w0aZmrP KyGuKg/8CA1NTSW0EIwaxOTbZrbBOrgByEvEGDpvKdekBrY6HNh4lTTjA4yvpjgb Enh6RhakBKImXDBZQrcbXrLhgoi3Uo5UJ7QzOZM3utytOg8L87E2+VXBdlH+ajMZ WG3+JaCZTKGadM53RYxzI3hvBbU7YAK8R10Aeqo8hvRV/nf7WXt6x/QB6xs4B6cy UrxQQBqV6v+2ch/hD4a1ljOplDIEtCpO+2wvWIVu3uCeJjZ50lWQHuVsjEIFQMNh 9AnO/6l+kpstHUwSElctEc9MKtrzreQngeWu9xlrLarmnY4RBHnfNQj1yBMQsVHY PhYiLBN8D10+QD+UysXO8M3B8vIlU2+oIrCpf63dEbCNYd4gJ8J3sf3eF/C37BRf RrfdW+ahWooYjiLyILs9R938BZcQY6KM6+4pciimY0soZXmiMKV+kuexvGGf9fDM YJwLn1hIbM9c4B+DVRV2NLLycLfYIlvymJX3mm/ZejyD1Z+OuYMtybotGxhRgzV8 onkzWcZNerNeGYPig259t4ieitJ7iY2NeBKi23ih5vBFQieUoOA7eO684sN6GKPF lk8de29pD8V5NStXYqNBkXx4Q3WIhvj088qdyqKEAuRNN3fCNyrY1KlWc6ZhcqQy 5BgHYyJnl3NIOZYuSTINAVHTExD5f0P9arkNDyhVAb8UvjdhPsc= =5X7Y -----END PGP SIGNATURE----- Merge tag 'nf-25-07-17' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf Pablo Neira Ayuso says: ==================== Netfilter fixes for net The following batch contains Netfilter fixes for net: 1) Three patches to enhance conntrack selftests for resize and clash resolution, from Florian Westphal. 2) Expand nft_concat_range.sh selftest to improve coverage from error path, from Florian Westphal. 3) Hide clash bit to userspace from netlink dumps until there is a good reason to expose, from Florian Westphal. 4) Revert notification for device registration/unregistration for nftables basechains and flowtables, we decided to go for a better way to handle this through the nfnetlink_hook infrastructure which will come via nf-next, patch from Phil Sutter. 5) Fix crash in conntrack due to race related to SLAB_TYPESAFE_BY_RCU that results in removing a recycled object that is not yet in the hashes. Move IPS_CONFIRM setting after the object is in the hashes. From Florian Westphal. netfilter pull request 25-07-17 * tag 'nf-25-07-17' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf: netfilter: nf_conntrack: fix crash due to removal of uninitialised entry Revert "netfilter: nf_tables: Add notifications for hook changes" netfilter: nf_tables: hide clash bit from userspace selftests: netfilter: nft_concat_range.sh: send packets to empty set selftests: netfilter: conntrack_resize.sh: also use udpclash tool selftests: netfilter: add conntrack clash resolution test case selftests: netfilter: conntrack_resize.sh: extend resize test ==================== Link: https://patch.msgid.link/20250717095808.41725-1-pablo@netfilter.org Signed-off-by: Paolo Abeni <pabeni@redhat.com> |
||
|
Florian Westphal
|
2d72afb340 |
netfilter: nf_conntrack: fix crash due to removal of uninitialised entry
A crash in conntrack was reported while trying to unlink the conntrack
entry from the hash bucket list:
[exception RIP: __nf_ct_delete_from_lists+172]
[..]
#7 [ff539b5a2b043aa0] nf_ct_delete at ffffffffc124d421 [nf_conntrack]
#8 [ff539b5a2b043ad0] nf_ct_gc_expired at ffffffffc124d999 [nf_conntrack]
#9 [ff539b5a2b043ae0] __nf_conntrack_find_get at ffffffffc124efbc [nf_conntrack]
[..]
The nf_conn struct is marked as allocated from slab but appears to be in
a partially initialised state:
ct hlist pointer is garbage; looks like the ct hash value
(hence crash).
ct->status is equal to IPS_CONFIRMED|IPS_DYING, which is expected
ct->timeout is 30000 (=30s), which is unexpected.
Everything else looks like normal udp conntrack entry. If we ignore
ct->status and pretend its 0, the entry matches those that are newly
allocated but not yet inserted into the hash:
- ct hlist pointers are overloaded and store/cache the raw tuple hash
- ct->timeout matches the relative time expected for a new udp flow
rather than the absolute 'jiffies' value.
If it were not for the presence of IPS_CONFIRMED,
__nf_conntrack_find_get() would have skipped the entry.
Theory is that we did hit following race:
cpu x cpu y cpu z
found entry E found entry E
E is expired <preemption>
nf_ct_delete()
return E to rcu slab
init_conntrack
E is re-inited,
ct->status set to 0
reply tuplehash hnnode.pprev
stores hash value.
cpu y found E right before it was deleted on cpu x.
E is now re-inited on cpu z. cpu y was preempted before
checking for expiry and/or confirm bit.
->refcnt set to 1
E now owned by skb
->timeout set to 30000
If cpu y were to resume now, it would observe E as
expired but would skip E due to missing CONFIRMED bit.
nf_conntrack_confirm gets called
sets: ct->status |= CONFIRMED
This is wrong: E is not yet added
to hashtable.
cpu y resumes, it observes E as expired but CONFIRMED:
<resumes>
nf_ct_expired()
-> yes (ct->timeout is 30s)
confirmed bit set.
cpu y will try to delete E from the hashtable:
nf_ct_delete() -> set DYING bit
__nf_ct_delete_from_lists
Even this scenario doesn't guarantee a crash:
cpu z still holds the table bucket lock(s) so y blocks:
wait for spinlock held by z
CONFIRMED is set but there is no
guarantee ct will be added to hash:
"chaintoolong" or "clash resolution"
logic both skip the insert step.
reply hnnode.pprev still stores the
hash value.
unlocks spinlock
return NF_DROP
<unblocks, then
crashes on hlist_nulls_del_rcu pprev>
In case CPU z does insert the entry into the hashtable, cpu y will unlink
E again right away but no crash occurs.
Without 'cpu y' race, 'garbage' hlist is of no consequence:
ct refcnt remains at 1, eventually skb will be free'd and E gets
destroyed via: nf_conntrack_put -> nf_conntrack_destroy -> nf_ct_destroy.
To resolve this, move the IPS_CONFIRMED assignment after the table
insertion but before the unlock.
Pablo points out that the confirm-bit-store could be reordered to happen
before hlist add resp. the timeout fixup, so switch to set_bit and
before_atomic memory barrier to prevent this.
It doesn't matter if other CPUs can observe a newly inserted entry right
before the CONFIRMED bit was set:
Such event cannot be distinguished from above "E is the old incarnation"
case: the entry will be skipped.
Also change nf_ct_should_gc() to first check the confirmed bit.
The gc sequence is:
1. Check if entry has expired, if not skip to next entry
2. Obtain a reference to the expired entry.
3. Call nf_ct_should_gc() to double-check step 1.
nf_ct_should_gc() is thus called only for entries that already failed an
expiry check. After this patch, once the confirmed bit check passes
ct->timeout has been altered to reflect the absolute 'best before' date
instead of a relative time. Step 3 will therefore not remove the entry.
Without this change to nf_ct_should_gc() we could still get this sequence:
1. Check if entry has expired.
2. Obtain a reference.
3. Call nf_ct_should_gc() to double-check step 1:
4 - entry is still observed as expired
5 - meanwhile, ct->timeout is corrected to absolute value on other CPU
and confirm bit gets set
6 - confirm bit is seen
7 - valid entry is removed again
First do check 6), then 4) so the gc expiry check always picks up either
confirmed bit unset (entry gets skipped) or expiry re-check failure for
re-inited conntrack objects.
This change cannot be backported to releases before 5.19. Without
commit
|
||
|
Felix Fietkau
|
9f735b6f8a |
net: fix segmentation after TCP/UDP fraglist GRO
Since "net: gro: use cb instead of skb->network_header", the skb network
header is no longer set in the GRO path.
This breaks fraglist segmentation, which relies on ip_hdr()/tcp_hdr()
to check for address/port changes.
Fix this regression by selectively setting the network header for merged
segment skbs.
Fixes:
|
||
|
Yue Haibing
|
ae3264a25a |
ipv6: mcast: Delay put pmc->idev in mld_del_delrec()
pmc->idev is still used in ip6_mc_clear_src(), so as mld_clear_delrec()
does, the reference should be put after ip6_mc_clear_src() return.
Fixes:
|
||
|
Jakub Kicinski
|
69a46a5b42 |
Merge branch '100GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue
Tony Nguyen says: ==================== Intel Wired LAN Driver Updates 2025-07-15 (ixgbe, fm10k, i40e, ice) Arnd Bergmann resolves compile issues with large NR_CPUS for ixgbe, fm10k, and i40e. For ice: Dave adds a NULL check for LAG netdev. Michal corrects a pointer check in debugfs initialization. * '100GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue: ice: check correct pointer in fwlog debugfs ice: add NULL check in eswitch lag check ethernet: intel: fix building with large NR_CPUS ==================== Link: https://patch.msgid.link/20250715202948.3841437-1-anthony.l.nguyen@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> |
||
|
Alok Tiwari
|
3cd582e7d0 |
net: airoha: fix potential use-after-free in airoha_npu_get()
np->name was being used after calling of_node_put(np), which
releases the node and can lead to a use-after-free bug.
Previously, of_node_put(np) was called unconditionally after
of_find_device_by_node(np), which could result in a use-after-free if
pdev is NULL.
This patch moves of_node_put(np) after the error check to ensure
the node is only released after both the error and success cases
are handled appropriately, preventing potential resource issues.
Fixes:
|
||
|
Christoph Paasch
|
531d0d32de |
net/mlx5: Correctly set gso_size when LRO is used
gso_size is expected by the networking stack to be the size of the
payload (thus, not including ethernet/IP/TCP-headers). However, cqe_bcnt
is the full sized frame (including the headers). Dividing cqe_bcnt by
lro_num_seg will then give incorrect results.
For example, running a bpftrace higher up in the TCP-stack
(tcp_event_data_recv), we commonly have gso_size set to 1450 or 1451 even
though in reality the payload was only 1448 bytes.
This can have unintended consequences:
- In tcp_measure_rcv_mss() len will be for example 1450, but. rcv_mss
will be 1448 (because tp->advmss is 1448). Thus, we will always
recompute scaling_ratio each time an LRO-packet is received.
- In tcp_gro_receive(), it will interfere with the decision whether or
not to flush and thus potentially result in less gro'ed packets.
So, we need to discount the protocol headers from cqe_bcnt so we can
actually divide the payload by lro_num_seg to get the real gso_size.
v2:
- Use "(unsigned char *)tcp + tcp->doff * 4 - skb->data)" to compute header-len
(Tariq Toukan <tariqt@nvidia.com>)
- Improve commit-message (Gal Pressman <gal@nvidia.com>)
Fixes:
|
||
|
Ralf Lici
|
2022d70401 |
ovpn: reset GSO metadata after decapsulation
The ovpn_netdev_write() function is responsible for injecting
decapsulated and decrypted packets back into the local network stack.
Prior to this patch, the skb could retain GSO metadata from the outer,
encrypted tunnel packet. This original GSO metadata, relevant to the
sender's transport context, becomes invalid and misleading for the
tunnel/data path once the inner packet is exposed.
Leaving this stale metadata intact causes internal GSO validation checks
further down the kernel's network stack (validate_xmit_skb()) to fail,
leading to packet drops. The reasons for these failures vary by
protocol, for example:
- for ICMP, no offload handler is registered;
- for TCP and UDP, the respective offload handlers return errors when
comparing skb->len to the outdated skb_shinfo(skb)->gso_size.
By calling skb_gso_reset(skb) we ensure the inner packet is presented to
gro_cells_receive() with a clean state, correctly indicating it is an
individual packet from the perspective of the local stack.
This change eliminates the "Driver has suspect GRO implementation, TCP
performance may be compromised" warning and improves overall TCP
performance by allowing GSO/GRO to function as intended on the
decapsulated traffic.
Fixes:
|
||
|
Antonio Quartulli
|
af52020fc5 |
ovpn: reject unexpected netlink attributes
Netlink ops do not expect all attributes to be always set, however
this condition is not explicitly coded any where, leading the user
to believe that all sent attributes are somewhat processed.
Fix this behaviour by introducing explicit checks.
For CMD_OVPN_PEER_GET and CMD_OVPN_KEY_GET directly open-code the
needed condition in the related ops handlers.
While for all other ops use attribute subsets in the ovpn.yaml spec file.
Fixes:
|
||
|
Ralf Lici
|
4c88cfcc67 |
ovpn: propagate socket mark to skb in UDP
OpenVPN allows users to configure a FW mark on sockets used to
communicate with other peers. The mark is set by means of the
`SO_MARK` Linux socket option.
However, in the ovpn UDP code path, the socket's `sk_mark` value is
currently ignored and it is not propagated to outgoing `skbs`.
This commit ensures proper inheritance of the field by setting
`skb->mark` to `sk->sk_mark` before handing the `skb` to the network
stack for transmission.
Fixes:
|
||
|
Jakub Kicinski
|
dae7f9cbd1 |
Merge branch 'mptcp-fix-fallback-related-races'
Matthieu Baerts says: ==================== mptcp: fix fallback-related races This series contains 3 fixes somewhat related to various races we have while handling fallback. The root cause of the issues addressed here is that the check for "we can fallback to tcp now" and the related action are not atomic. That also applies to fallback due to MP_FAIL -- where the window race is even wider. Address the issue introducing an additional spinlock to bundle together all the relevant events, as per patch 1 and 2. These fixes can be backported up to v5.19 and v5.15. Note that mptcp_disconnect() unconditionally clears the fallback status (zeroing msk->flags) but don't touch the `allows_infinite_fallback` flag. Such issue is addressed in patch 3, and can be backported up to v5.17. ==================== Link: https://patch.msgid.link/20250714-net-mptcp-fallback-races-v1-0-391aff963322@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org> |
||
|
Paolo Abeni
|
da9b2fc7b7 |
mptcp: reset fallback status gracefully at disconnect() time
mptcp_disconnect() clears the fallback bit unconditionally, without
touching the associated flags.
The bit clear is safe, as no fallback operation can race with that --
all subflow are already in TCP_CLOSE status thanks to the previous
FASTCLOSE -- but we need to consistently reset all the fallback related
status.
Also acquire the relevant lock, to avoid fouling static analyzers.
Fixes:
|
||
|
Paolo Abeni
|
def5b7b264 |
mptcp: plug races between subflow fail and subflow creation
We have races similar to the one addressed by the previous patch between
subflow failing and additional subflow creation. They are just harder to
trigger.
The solution is similar. Use a separate flag to track the condition
'socket state prevent any additional subflow creation' protected by the
fallback lock.
The socket fallback makes such flag true, and also receiving or sending
an MP_FAIL option.
The field 'allow_infinite_fallback' is now always touched under the
relevant lock, we can drop the ONCE annotation on write.
Fixes:
|
||
|
Paolo Abeni
|
f8a1d9b18c |
mptcp: make fallback action and fallback decision atomic
Syzkaller reported the following splat:
WARNING: CPU: 1 PID: 7704 at net/mptcp/protocol.h:1223 __mptcp_do_fallback net/mptcp/protocol.h:1223 [inline]
WARNING: CPU: 1 PID: 7704 at net/mptcp/protocol.h:1223 mptcp_do_fallback net/mptcp/protocol.h:1244 [inline]
WARNING: CPU: 1 PID: 7704 at net/mptcp/protocol.h:1223 check_fully_established net/mptcp/options.c:982 [inline]
WARNING: CPU: 1 PID: 7704 at net/mptcp/protocol.h:1223 mptcp_incoming_options+0x21a8/0x2510 net/mptcp/options.c:1153
Modules linked in:
CPU: 1 UID: 0 PID: 7704 Comm: syz.3.1419 Not tainted 6.16.0-rc3-gbd5ce2324dba #20 PREEMPT(voluntary)
Hardware name: QEMU Ubuntu 24.04 PC (i440FX + PIIX, 1996), BIOS 1.16.3-debian-1.16.3-2 04/01/2014
RIP: 0010:__mptcp_do_fallback net/mptcp/protocol.h:1223 [inline]
RIP: 0010:mptcp_do_fallback net/mptcp/protocol.h:1244 [inline]
RIP: 0010:check_fully_established net/mptcp/options.c:982 [inline]
RIP: 0010:mptcp_incoming_options+0x21a8/0x2510 net/mptcp/options.c:1153
Code: 24 18 e8 bb 2a 00 fd e9 1b df ff ff e8 b1 21 0f 00 e8 ec 5f c4 fc 44 0f b7 ac 24 b0 00 00 00 e9 54 f1 ff ff e8 d9 5f c4 fc 90 <0f> 0b 90 e9 b8 f4 ff ff e8 8b 2a 00 fd e9 8d e6 ff ff e8 81 2a 00
RSP: 0018:ffff8880a3f08448 EFLAGS: 00010246
RAX: 0000000000000000 RBX: ffff8880180a8000 RCX: ffffffff84afcf45
RDX: ffff888090223700 RSI: ffffffff84afdaa7 RDI: 0000000000000001
RBP: ffff888017955780 R08: 0000000000000001 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000000
R13: ffff8880180a8910 R14: ffff8880a3e9d058 R15: 0000000000000000
FS: 00005555791b8500(0000) GS:ffff88811c495000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 000000110c2800b7 CR3: 0000000058e44000 CR4: 0000000000350ef0
Call Trace:
<IRQ>
tcp_reset+0x26f/0x2b0 net/ipv4/tcp_input.c:4432
tcp_validate_incoming+0x1057/0x1b60 net/ipv4/tcp_input.c:5975
tcp_rcv_established+0x5b5/0x21f0 net/ipv4/tcp_input.c:6166
tcp_v4_do_rcv+0x5dc/0xa70 net/ipv4/tcp_ipv4.c:1925
tcp_v4_rcv+0x3473/0x44a0 net/ipv4/tcp_ipv4.c:2363
ip_protocol_deliver_rcu+0xba/0x480 net/ipv4/ip_input.c:205
ip_local_deliver_finish+0x2f1/0x500 net/ipv4/ip_input.c:233
NF_HOOK include/linux/netfilter.h:317 [inline]
NF_HOOK include/linux/netfilter.h:311 [inline]
ip_local_deliver+0x1be/0x560 net/ipv4/ip_input.c:254
dst_input include/net/dst.h:469 [inline]
ip_rcv_finish net/ipv4/ip_input.c:447 [inline]
NF_HOOK include/linux/netfilter.h:317 [inline]
NF_HOOK include/linux/netfilter.h:311 [inline]
ip_rcv+0x514/0x810 net/ipv4/ip_input.c:567
__netif_receive_skb_one_core+0x197/0x1e0 net/core/dev.c:5975
__netif_receive_skb+0x1f/0x120 net/core/dev.c:6088
process_backlog+0x301/0x1360 net/core/dev.c:6440
__napi_poll.constprop.0+0xba/0x550 net/core/dev.c:7453
napi_poll net/core/dev.c:7517 [inline]
net_rx_action+0xb44/0x1010 net/core/dev.c:7644
handle_softirqs+0x1d0/0x770 kernel/softirq.c:579
do_softirq+0x3f/0x90 kernel/softirq.c:480
</IRQ>
<TASK>
__local_bh_enable_ip+0xed/0x110 kernel/softirq.c:407
local_bh_enable include/linux/bottom_half.h:33 [inline]
inet_csk_listen_stop+0x2c5/0x1070 net/ipv4/inet_connection_sock.c:1524
mptcp_check_listen_stop.part.0+0x1cc/0x220 net/mptcp/protocol.c:2985
mptcp_check_listen_stop net/mptcp/mib.h:118 [inline]
__mptcp_close+0x9b9/0xbd0 net/mptcp/protocol.c:3000
mptcp_close+0x2f/0x140 net/mptcp/protocol.c:3066
inet_release+0xed/0x200 net/ipv4/af_inet.c:435
inet6_release+0x4f/0x70 net/ipv6/af_inet6.c:487
__sock_release+0xb3/0x270 net/socket.c:649
sock_close+0x1c/0x30 net/socket.c:1439
__fput+0x402/0xb70 fs/file_table.c:465
task_work_run+0x150/0x240 kernel/task_work.c:227
resume_user_mode_work include/linux/resume_user_mode.h:50 [inline]
exit_to_user_mode_loop+0xd4/0xe0 kernel/entry/common.c:114
exit_to_user_mode_prepare include/linux/entry-common.h:330 [inline]
syscall_exit_to_user_mode_work include/linux/entry-common.h:414 [inline]
syscall_exit_to_user_mode include/linux/entry-common.h:449 [inline]
do_syscall_64+0x245/0x360 arch/x86/entry/syscall_64.c:100
entry_SYSCALL_64_after_hwframe+0x77/0x7f
RIP: 0033:0x7fc92f8a36ad
Code: ff c3 66 2e 0f 1f 84 00 00 00 00 00 90 f3 0f 1e fa 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 b0 ff ff ff f7 d8 64 89 01 48
RSP: 002b:00007ffcf52802d8 EFLAGS: 00000246 ORIG_RAX: 00000000000001b4
RAX: 0000000000000000 RBX: 00007ffcf52803a8 RCX: 00007fc92f8a36ad
RDX: 0000000000000000 RSI: 000000000000001e RDI: 0000000000000003
RBP: 00007fc92fae7ba0 R08: 0000000000000001 R09: 0000002800000000
R10: 00007fc92f700000 R11: 0000000000000246 R12: 00007fc92fae5fac
R13: 00007fc92fae5fa0 R14: 0000000000026d00 R15: 0000000000026c51
</TASK>
irq event stamp: 4068
hardirqs last enabled at (4076): [<ffffffff81544816>] __up_console_sem+0x76/0x80 kernel/printk/printk.c:344
hardirqs last disabled at (4085): [<ffffffff815447fb>] __up_console_sem+0x5b/0x80 kernel/printk/printk.c:342
softirqs last enabled at (3096): [<ffffffff840e1be0>] local_bh_enable include/linux/bottom_half.h:33 [inline]
softirqs last enabled at (3096): [<ffffffff840e1be0>] inet_csk_listen_stop+0x2c0/0x1070 net/ipv4/inet_connection_sock.c:1524
softirqs last disabled at (3097): [<ffffffff813b6b9f>] do_softirq+0x3f/0x90 kernel/softirq.c:480
Since we need to track the 'fallback is possible' condition and the
fallback status separately, there are a few possible races open between
the check and the actual fallback action.
Add a spinlock to protect the fallback related information and use it
close all the possible related races. While at it also remove the
too-early clearing of allow_infinite_fallback in __mptcp_subflow_connect():
the field will be correctly cleared by subflow_finish_connect() if/when
the connection will complete successfully.
If fallback is not possible, as per RFC, reset the current subflow.
Since the fallback operation can now fail and return value should be
checked, rename the helper accordingly.
Fixes:
|
||
|
Jiawen Wu
|
2b30a3d1ec |
net: libwx: fix multicast packets received count
Multicast good packets received by PF rings that pass ethternet MAC
address filtering are counted for rtnl_link_stats64.multicast. The
counter is not cleared on read. Fix the duplicate counting on updating
statistics.
Fixes:
|
||
|
Jakub Kicinski
|
d4f9b88479 |
Merge branch 'fix-rx-fatal-errors'
Jiawen Wu says: ==================== Fix Rx fatal errors There are some fatal errors on the Rx NAPI path, which can cause the kernel to crash. Fix known issues and potential risks. The part of the patches has been mentioned before[1]. [1]: https://lore.kernel.org/all/C8A23A11DB646E60+20250630094102.22265-1-jiawenwu@trustnetic.com/ v1: https://lore.kernel.org/20250709064025.19436-1-jiawenwu@trustnetic.com ==================== Link: https://patch.msgid.link/20250714024755.17512-1-jiawenwu@trustnetic.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> |
||
|
Jiawen Wu
|
d992ed7e1b |
net: libwx: properly reset Rx ring descriptor
When device reset is triggered by feature changes such as toggling Rx
VLAN offload, wx->do_reset() is called to reinitialize Rx rings. The
hardware descriptor ring may retain stale values from previous sessions.
And only set the length to 0 in rx_desc[0] would result in building
malformed SKBs. Fix it to ensure a clean slate after device reset.
[ 549.186435] [ C16] ------------[ cut here ]------------
[ 549.186457] [ C16] kernel BUG at net/core/skbuff.c:2814!
[ 549.186468] [ C16] Oops: invalid opcode: 0000 [#1] SMP NOPTI
[ 549.186472] [ C16] CPU: 16 UID: 0 PID: 0 Comm: swapper/16 Kdump: loaded Not tainted 6.16.0-rc4+ #23 PREEMPT(voluntary)
[ 549.186476] [ C16] Hardware name: Micro-Star International Co., Ltd. MS-7E16/X670E GAMING PLUS WIFI (MS-7E16), BIOS 1.90 12/31/2024
[ 549.186478] [ C16] RIP: 0010:__pskb_pull_tail+0x3ff/0x510
[ 549.186484] [ C16] Code: 06 f0 ff 4f 34 74 7b 4d 8b 8c 24 c8 00 00 00 45 8b 84 24 c0 00 00 00 e9 c8 fd ff ff 48 c7 44 24 08 00 00 00 00 e9 5e fe ff ff <0f> 0b 31 c0 e9 23 90 5b ff 41 f7 c6 ff 0f 00 00 75 bf 49 8b 06 a8
[ 549.186487] [ C16] RSP: 0018:ffffb391c0640d70 EFLAGS: 00010282
[ 549.186490] [ C16] RAX: 00000000fffffff2 RBX: ffff8fe7e4d40200 RCX: 00000000fffffff2
[ 549.186492] [ C16] RDX: ffff8fe7c3a4bf8e RSI: 0000000000000180 RDI: ffff8fe7c3a4bf40
[ 549.186494] [ C16] RBP: ffffb391c0640da8 R08: ffff8fe7c3a4c0c0 R09: 000000000000000e
[ 549.186496] [ C16] R10: ffffb391c0640d88 R11: 000000000000000e R12: ffff8fe7e4d40200
[ 549.186497] [ C16] R13: 00000000fffffff2 R14: ffff8fe7fa01a000 R15: 00000000fffffff2
[ 549.186499] [ C16] FS: 0000000000000000(0000) GS:ffff8fef5ae40000(0000) knlGS:0000000000000000
[ 549.186502] [ C16] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 549.186503] [ C16] CR2: 00007f77d81d6000 CR3: 000000051a032000 CR4: 0000000000750ef0
[ 549.186505] [ C16] PKRU: 55555554
[ 549.186507] [ C16] Call Trace:
[ 549.186510] [ C16] <IRQ>
[ 549.186513] [ C16] ? srso_alias_return_thunk+0x5/0xfbef5
[ 549.186517] [ C16] __skb_pad+0xc7/0xf0
[ 549.186523] [ C16] wx_clean_rx_irq+0x355/0x3b0 [libwx]
[ 549.186533] [ C16] wx_poll+0x92/0x120 [libwx]
[ 549.186540] [ C16] __napi_poll+0x28/0x190
[ 549.186544] [ C16] net_rx_action+0x301/0x3f0
[ 549.186548] [ C16] ? srso_alias_return_thunk+0x5/0xfbef5
[ 549.186551] [ C16] ? __raw_spin_lock_irqsave+0x1e/0x50
[ 549.186554] [ C16] ? srso_alias_return_thunk+0x5/0xfbef5
[ 549.186557] [ C16] ? wake_up_nohz_cpu+0x35/0x160
[ 549.186559] [ C16] ? srso_alias_return_thunk+0x5/0xfbef5
[ 549.186563] [ C16] handle_softirqs+0xf9/0x2c0
[ 549.186568] [ C16] __irq_exit_rcu+0xc7/0x130
[ 549.186572] [ C16] common_interrupt+0xb8/0xd0
[ 549.186576] [ C16] </IRQ>
[ 549.186577] [ C16] <TASK>
[ 549.186579] [ C16] asm_common_interrupt+0x22/0x40
[ 549.186582] [ C16] RIP: 0010:cpuidle_enter_state+0xc2/0x420
[ 549.186585] [ C16] Code: 00 00 e8 11 0e 5e ff e8 ac f0 ff ff 49 89 c5 0f 1f 44 00 00 31 ff e8 0d ed 5c ff 45 84 ff 0f 85 40 02 00 00 fb 0f 1f 44 00 00 <45> 85 f6 0f 88 84 01 00 00 49 63 d6 48 8d 04 52 48 8d 04 82 49 8d
[ 549.186587] [ C16] RSP: 0018:ffffb391c0277e78 EFLAGS: 00000246
[ 549.186590] [ C16] RAX: ffff8fef5ae40000 RBX: 0000000000000003 RCX: 0000000000000000
[ 549.186591] [ C16] RDX: 0000007fde0faac5 RSI: ffffffff826e53f6 RDI: ffffffff826fa9b3
[ 549.186593] [ C16] RBP: ffff8fe7c3a20800 R08: 0000000000000002 R09: 0000000000000000
[ 549.186595] [ C16] R10: 0000000000000000 R11: 000000000000ffff R12: ffffffff82ed7a40
[ 549.186596] [ C16] R13: 0000007fde0faac5 R14: 0000000000000003 R15: 0000000000000000
[ 549.186601] [ C16] ? cpuidle_enter_state+0xb3/0x420
[ 549.186605] [ C16] cpuidle_enter+0x29/0x40
[ 549.186609] [ C16] cpuidle_idle_call+0xfd/0x170
[ 549.186613] [ C16] do_idle+0x7a/0xc0
[ 549.186616] [ C16] cpu_startup_entry+0x25/0x30
[ 549.186618] [ C16] start_secondary+0x117/0x140
[ 549.186623] [ C16] common_startup_64+0x13e/0x148
[ 549.186628] [ C16] </TASK>
Fixes:
|
||
|
Jiawen Wu
|
5fd77cc6bd |
net: libwx: fix the using of Rx buffer DMA
The wx_rx_buffer structure contained two DMA address fields: 'dma' and
'page_dma'. However, only 'page_dma' was actually initialized and used
to program the Rx descriptor. But 'dma' was uninitialized and used in
some paths.
This could lead to undefined behavior, including DMA errors or
use-after-free, if the uninitialized 'dma' was used. Althrough such
error has not yet occurred, it is worth fixing in the code.
Fixes:
|
||
|
Jiawen Wu
|
1b7e585c04 |
net: libwx: remove duplicate page_pool_put_full_page()
page_pool_put_full_page() should only be invoked when freeing Rx buffers
or building a skb if the size is too short. At other times, the pages
need to be reused. So remove the redundant page put. In the original
code, double free pages cause kernel panic:
[ 876.949834] __irq_exit_rcu+0xc7/0x130
[ 876.949836] common_interrupt+0xb8/0xd0
[ 876.949838] </IRQ>
[ 876.949838] <TASK>
[ 876.949840] asm_common_interrupt+0x22/0x40
[ 876.949841] RIP: 0010:cpuidle_enter_state+0xc2/0x420
[ 876.949843] Code: 00 00 e8 d1 1d 5e ff e8 ac f0 ff ff 49 89 c5 0f 1f 44 00 00 31 ff e8 cd fc 5c ff 45 84 ff 0f 85 40 02 00 00 fb 0f 1f 44 00 00 <45> 85 f6 0f 88 84 01 00 00 49 63 d6 48 8d 04 52 48 8d 04 82 49 8d
[ 876.949844] RSP: 0018:ffffaa7340267e78 EFLAGS: 00000246
[ 876.949845] RAX: ffff9e3f135be000 RBX: 0000000000000002 RCX: 0000000000000000
[ 876.949846] RDX: 000000cc2dc4cb7c RSI: ffffffff89ee49ae RDI: ffffffff89ef9f9e
[ 876.949847] RBP: ffff9e378f940800 R08: 0000000000000002 R09: 00000000000000ed
[ 876.949848] R10: 000000000000afc8 R11: ffff9e3e9e5a9b6c R12: ffffffff8a6d8580
[ 876.949849] R13: 000000cc2dc4cb7c R14: 0000000000000002 R15: 0000000000000000
[ 876.949852] ? cpuidle_enter_state+0xb3/0x420
[ 876.949855] cpuidle_enter+0x29/0x40
[ 876.949857] cpuidle_idle_call+0xfd/0x170
[ 876.949859] do_idle+0x7a/0xc0
[ 876.949861] cpu_startup_entry+0x25/0x30
[ 876.949862] start_secondary+0x117/0x140
[ 876.949864] common_startup_64+0x13e/0x148
[ 876.949867] </TASK>
[ 876.949868] ---[ end trace 0000000000000000 ]---
[ 876.949869] ------------[ cut here ]------------
[ 876.949870] list_del corruption, ffffead40445a348->next is NULL
[ 876.949873] WARNING: CPU: 14 PID: 0 at lib/list_debug.c:52 __list_del_entry_valid_or_report+0x67/0x120
[ 876.949875] Modules linked in: snd_hrtimer(E) bnep(E) binfmt_misc(E) amdgpu(E) squashfs(E) vfat(E) loop(E) fat(E) amd_atl(E) snd_hda_codec_realtek(E) intel_rapl_msr(E) snd_hda_codec_generic(E) intel_rapl_common(E) snd_hda_scodec_component(E) snd_hda_codec_hdmi(E) snd_hda_intel(E) edac_mce_amd(E) snd_intel_dspcfg(E) snd_hda_codec(E) snd_hda_core(E) amdxcp(E) kvm_amd(E) snd_hwdep(E) gpu_sched(E) drm_panel_backlight_quirks(E) cec(E) snd_pcm(E) drm_buddy(E) snd_seq_dummy(E) drm_ttm_helper(E) btusb(E) kvm(E) snd_seq_oss(E) btrtl(E) ttm(E) btintel(E) snd_seq_midi(E) btbcm(E) drm_exec(E) snd_seq_midi_event(E) i2c_algo_bit(E) snd_rawmidi(E) bluetooth(E) drm_suballoc_helper(E) irqbypass(E) snd_seq(E) ghash_clmulni_intel(E) sha512_ssse3(E) drm_display_helper(E) aesni_intel(E) snd_seq_device(E) rfkill(E) snd_timer(E) gf128mul(E) drm_client_lib(E) drm_kms_helper(E) snd(E) i2c_piix4(E) joydev(E) soundcore(E) wmi_bmof(E) ccp(E) k10temp(E) i2c_smbus(E) gpio_amdpt(E) i2c_designware_platform(E) gpio_generic(E) sg(E)
[ 876.949914] i2c_designware_core(E) sch_fq_codel(E) parport_pc(E) drm(E) ppdev(E) lp(E) parport(E) fuse(E) nfnetlink(E) ip_tables(E) ext4 crc16 mbcache jbd2 sd_mod sfp mdio_i2c i2c_core txgbe ahci ngbe pcs_xpcs libahci libwx r8169 phylink libata realtek ptp pps_core video wmi
[ 876.949933] CPU: 14 UID: 0 PID: 0 Comm: swapper/14 Kdump: loaded Tainted: G W E 6.16.0-rc2+ #20 PREEMPT(voluntary)
[ 876.949935] Tainted: [W]=WARN, [E]=UNSIGNED_MODULE
[ 876.949936] Hardware name: Micro-Star International Co., Ltd. MS-7E16/X670E GAMING PLUS WIFI (MS-7E16), BIOS 1.90 12/31/2024
[ 876.949936] RIP: 0010:__list_del_entry_valid_or_report+0x67/0x120
[ 876.949938] Code: 00 00 00 48 39 7d 08 0f 85 a6 00 00 00 5b b8 01 00 00 00 5d 41 5c e9 73 0d 93 ff 48 89 fe 48 c7 c7 a0 31 e8 89 e8 59 7c b3 ff <0f> 0b 31 c0 5b 5d 41 5c e9 57 0d 93 ff 48 89 fe 48 c7 c7 c8 31 e8
[ 876.949940] RSP: 0018:ffffaa73405d0c60 EFLAGS: 00010282
[ 876.949941] RAX: 0000000000000000 RBX: ffffead40445a348 RCX: 0000000000000000
[ 876.949942] RDX: 0000000000000105 RSI: 0000000000000001 RDI: 00000000ffffffff
[ 876.949943] RBP: 0000000000000000 R08: 000000010006dfde R09: ffffffff8a47d150
[ 876.949944] R10: ffffffff8a47d150 R11: 0000000000000003 R12: dead000000000122
[ 876.949945] R13: ffff9e3e9e5af700 R14: ffffead40445a348 R15: ffff9e3e9e5af720
[ 876.949946] FS: 0000000000000000(0000) GS:ffff9e3f135be000(0000) knlGS:0000000000000000
[ 876.949947] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 876.949948] CR2: 00007fa58b480048 CR3: 0000000156724000 CR4: 0000000000750ef0
[ 876.949949] PKRU: 55555554
[ 876.949950] Call Trace:
[ 876.949951] <IRQ>
[ 876.949952] __rmqueue_pcplist+0x53/0x2c0
[ 876.949955] alloc_pages_bulk_noprof+0x2e0/0x660
[ 876.949958] __page_pool_alloc_pages_slow+0xa9/0x400
[ 876.949961] page_pool_alloc_pages+0xa/0x20
[ 876.949963] wx_alloc_rx_buffers+0xd7/0x110 [libwx]
[ 876.949967] wx_clean_rx_irq+0x262/0x430 [libwx]
[ 876.949971] wx_poll+0x92/0x130 [libwx]
[ 876.949975] __napi_poll+0x28/0x190
[ 876.949977] net_rx_action+0x301/0x3f0
[ 876.949980] ? srso_alias_return_thunk+0x5/0xfbef5
[ 876.949981] ? profile_tick+0x30/0x70
[ 876.949983] ? srso_alias_return_thunk+0x5/0xfbef5
[ 876.949984] ? srso_alias_return_thunk+0x5/0xfbef5
[ 876.949986] ? timerqueue_add+0xa3/0xc0
[ 876.949988] ? srso_alias_return_thunk+0x5/0xfbef5
[ 876.949989] ? __raise_softirq_irqoff+0x16/0x70
[ 876.949991] ? srso_alias_return_thunk+0x5/0xfbef5
[ 876.949993] ? srso_alias_return_thunk+0x5/0xfbef5
[ 876.949994] ? wx_msix_clean_rings+0x41/0x50 [libwx]
[ 876.949998] handle_softirqs+0xf9/0x2c0
Fixes:
|
||
|
Markus Blöchl
|
e6176ab107 |
net: stmmac: intel: populate entire system_counterval_t in get_time_fn() callback
get_time_fn() callback implementations are expected to fill out the
entire system_counterval_t struct as it may be initially uninitialized.
This broke with the removal of convert_art_to_tsc() helper functions
which left use_nsecs uninitialized.
Initially assign the entire struct with default values.
Fixes:
|
||
|
Jakub Kicinski
|
ae2256f967 |
linux-can-fixes-for-6.16-20250715
-----BEGIN PGP SIGNATURE----- iQFHBAABCgAxFiEEn/sM2K9nqF/8FWzzDHRl3/mQkZwFAmh2KYETHG1rbEBwZW5n dXRyb25peC5kZQAKCRAMdGXf+ZCRnDU8B/4iD8EZa3ZPBo0ZIpeCSw1+xL/4oDec ZkSbgL01ufOFJn3PtK7OrU85yhLcAIsG1AhjzqrFtj/lIG/XkNZlasegva/R2k/o Q1TOY4I1NozeLgzwHL1352aYQ0L5oNq4gwe3Ue4aBM7x9Lc+lCqmtFMmi0+XprUE SJJ6FSMYbv4+yZknEnAjtIgv/QmiEQAfEpmJOIyyJai1Y7oqV7z+Ti0feLnb/uVP NA/VgML/Ab5pnNG2Ykh8+65sqiNI3jYj3BrD7vdZ0mCtj70MzlHLztpKEY62x4gJ Fn31QfbwsvtSCSCgxNEH5i+mX1u5c63dMhIntZhfhfYD4/tCkIntNL1i =9Yue -----END PGP SIGNATURE----- Merge tag 'linux-can-fixes-for-6.16-20250715' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can Marc Kleine-Budde says: ==================== pull-request: can 2025-07-15 Brett Werling's patch for the tcan4x5x glue code driver fixes the detection of chips which are held in reset/sleep and must be woken up by GPIO prior to communication. * tag 'linux-can-fixes-for-6.16-20250715' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can: can: tcan4x5x: fix reset gpio usage during probe ==================== Link: https://patch.msgid.link/20250715101625.3202690-1-mkl@pengutronix.de Signed-off-by: Jakub Kicinski <kuba@kernel.org> |
||
|
Oliver Neukum
|
4c4ca3c461 |
usb: net: sierra: check for no status endpoint
The driver checks for having three endpoints and
having bulk in and out endpoints, but not that
the third endpoint is interrupt input.
Rectify the omission.
Reported-by: syzbot+3f89ec3d1d0842e95d50@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/linux-usb/686d5a9f.050a0220.1ffab7.0017.GAE@google.com/
Tested-by: syzbot+3f89ec3d1d0842e95d50@syzkaller.appspotmail.com
Fixes:
|
||
|
Michal Swiatkowski
|
bedd0330a1 |
ice: check correct pointer in fwlog debugfs
pf->ice_debugfs_pf_fwlog should be checked for an error here.
Fixes:
|
||
|
Dave Ertman
|
3ce58b01ad |
ice: add NULL check in eswitch lag check
The function ice_lag_is_switchdev_running() is being called from outside of
the LAG event handler code. This results in the lag->upper_netdev being
NULL sometimes. To avoid a NULL-pointer dereference, there needs to be a
check before it is dereferenced.
Fixes:
|
||
|
Arnd Bergmann
|
24171a5a4a |
ethernet: intel: fix building with large NR_CPUS
With large values of CONFIG_NR_CPUS, three Intel ethernet drivers fail to
compile like:
In function ‘i40e_free_q_vector’,
inlined from ‘i40e_vsi_alloc_q_vectors’ at drivers/net/ethernet/intel/i40e/i40e_main.c:12112:3:
571 | _compiletime_assert(condition, msg, __compiletime_assert_, __COUNTER__)
include/linux/rcupdate.h:1084:17: note: in expansion of macro ‘BUILD_BUG_ON’
1084 | BUILD_BUG_ON(offsetof(typeof(*(ptr)), rhf) >= 4096); \
drivers/net/ethernet/intel/i40e/i40e_main.c:5113:9: note: in expansion of macro ‘kfree_rcu’
5113 | kfree_rcu(q_vector, rcu);
| ^~~~~~~~~
The problem is that the 'rcu' member in 'q_vector' is too far from the start
of the structure. Move this member before the CPU mask instead, in all three
drivers.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: David S. Miller <davem@davemloft.net>
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Reviewed-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Tested-by: Sunitha Mekala <sunithax.d.mekala@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
||
|
Paolo Abeni
|
0e9418961f |
selftests: net: increase inter-packet timeout in udpgro.sh
The mentioned test is not very stable when running on top of
debug kernel build. Increase the inter-packet timeout to allow
more slack in such environments.
Fixes:
|
||
|
Johannes Berg
|
bbc19fef57 |
iwlwifi-fixes
- missing unlock in error path - Avoid FW assert on bad command values - fix kernel panic due to incorrect index calculation -----BEGIN PGP SIGNATURE----- iHUEABYIAB0WIQQM3A3Pv7vbm9vtjWbacY7uyt+OfQUCaHYdCwAKCRDacY7uyt+O fcJ5AQDX1vLVwEKX6mbmkwO7LWTUdKBy+QG2/ccoyoHTX1kYOgD/UTDQ9i4/+EYs Jdo0w1f/w86FXdDL8LOamGZulHEubAI= =Q8S5 -----END PGP SIGNATURE----- Merge tag 'iwlwifi-fixes-2025-07-15' of https://git.kernel.org/pub/scm/linux/kernel/git/iwlwifi/iwlwifi-next Miri Korenblit says: ==================== iwlwifi-fixes - missing unlock in error path - Avoid FW assert on bad command values - fix kernel panic due to incorrect index calculation ==================== Signed-off-by: Johannes Berg <johannes.berg@intel.com> |
||
|
Brett Werling
|
0f97a7588d |
can: tcan4x5x: fix reset gpio usage during probe
Fixes reset GPIO usage during probe by ensuring we retrieve the GPIO and
take the device out of reset (if it defaults to being in reset) before
we attempt to communicate with the device. This is achieved by moving
the call to tcan4x5x_get_gpios() before tcan4x5x_find_version() and
avoiding any device communication while getting the GPIOs. Once we
determine the version, we can then take the knowledge of which GPIOs we
obtained and use it to decide whether we need to disable the wake or
state pin functions within the device.
This change is necessary in a situation where the reset GPIO is pulled
high externally before the CPU takes control of it, meaning we need to
explicitly bring the device out of reset before we can start
communicating with it at all.
This also has the effect of fixing an issue where a reset of the device
would occur after having called tcan4x5x_disable_wake(), making the
original behavior not actually disable the wake. This patch should now
disable wake or state pin functions well after the reset occurs.
Signed-off-by: Brett Werling <brett.werling@garmin.com>
Link: https://patch.msgid.link/20250711141728.1826073-1-brett.werling@garmin.com
Cc: Markus Schneider-Pargmann <msp@baylibre.com>
Fixes:
|
||
|
Ville Syrjälä
|
46345ed362 |
wifi: iwlwifi: Fix botched indexing conversion
The conversion from compiler assisted indexing to manual
indexing wasn't done correctly. The array is still made
up of __le16 elements so multiplying the outer index by
the element size is not what we want. Fix it up.
This causes the kernel to oops when trying to transfer any
significant amount of data over wifi:
BUG: unable to handle page fault for address: ffffc900009f5282
PGD 100000067 P4D 100000067 PUD 1000fb067 PMD 102e82067 PTE 0
Oops: Oops: 0002 [#1] SMP
CPU: 1 UID: 0 PID: 99 Comm: kworker/u8:3 Not tainted 6.15.0-rc2-cl-bisect3-00604-g6204d5130a64-dirty #78 PREEMPT
Hardware name: Dell Inc. Latitude E5400 /0D695C, BIOS A19 06/13/2013
Workqueue: events_unbound cfg80211_wiphy_work [cfg80211]
RIP: 0010:iwl_trans_pcie_tx+0x4dd/0xe60 [iwlwifi]
Code: 00 00 66 81 fa ff 0f 0f 87 42 09 00 00 3d ff 00 00 00 0f 8f 37 09 00 00 41 c1 e0 0c 41 09 d0 48 8d 14 b6 48 c1 e2 07 48 01 ca <66> 44 89 04 57 48 8d 0c 12 83 f8 3f 0f 8e 84 01 00 00 41 8b 85 80
RSP: 0018:ffffc900001c3b50 EFLAGS: 00010206
RAX: 00000000000000c1 RBX: ffff88810b180028 RCX: 00000000000000c1
RDX: 0000000000002141 RSI: 000000000000000d RDI: ffffc900009f1000
RBP: 0000000000000002 R08: 0000000000000025 R09: ffffffffa050fa60
R10: 00000000fbdbf4bc R11: 0000000000000082 R12: ffff88810e5ade40
R13: ffff88810af81588 R14: 000000000000001a R15: ffff888100dfe0c8
FS: 0000000000000000(0000) GS:ffff8881998c3000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: ffffc900009f5282 CR3: 0000000001e39000 CR4: 00000000000426f0
Call Trace:
<TASK>
? rcu_is_watching+0xd/0x40
? __iwl_dbg+0xb1/0xe0 [iwlwifi]
iwlagn_tx_skb+0x8e2/0xcb0 [iwldvm]
iwlagn_mac_tx+0x18/0x30 [iwldvm]
ieee80211_handle_wake_tx_queue+0x6c/0xc0 [mac80211]
ieee80211_agg_start_txq+0x140/0x2e0 [mac80211]
ieee80211_agg_tx_operational+0x126/0x210 [mac80211]
ieee80211_process_addba_resp+0x27b/0x2a0 [mac80211]
ieee80211_iface_work+0x4bd/0x4d0 [mac80211]
? _raw_spin_unlock_irq+0x1f/0x40
cfg80211_wiphy_work+0x117/0x1f0 [cfg80211]
process_one_work+0x1ee/0x570
worker_thread+0x1c5/0x3b0
? bh_worker+0x240/0x240
kthread+0x110/0x220
? kthread_queue_delayed_work+0x90/0x90
ret_from_fork+0x28/0x40
? kthread_queue_delayed_work+0x90/0x90
ret_from_fork_asm+0x11/0x20
</TASK>
Modules linked in: ctr aes_generic ccm sch_fq_codel bnep xt_tcpudp xt_multiport xt_state iptable_filter iptable_nat nf_nat nf_conntrack nf_defrag_ipv4 ip_tables x_tables btusb btrtl btintel btbcm bluetooth ecdh_generic ecc libaes hid_generic usbhid hid binfmt_misc joydev mousedev snd_hda_codec_hdmi iwldvm snd_hda_codec_idt snd_hda_codec_generic mac80211 coretemp iTCO_wdt watchdog kvm_intel i2c_dev snd_hda_intel libarc4 kvm snd_intel_dspcfg sdhci_pci sdhci_uhs2 snd_hda_codec iwlwifi sdhci irqbypass cqhci snd_hwdep snd_hda_core cfg80211 firewire_ohci mmc_core psmouse snd_pcm i2c_i801 firewire_core pcspkr led_class uhci_hcd i2c_smbus tg3 crc_itu_t iosf_mbi snd_timer rfkill libphy ehci_pci snd ehci_hcd lpc_ich mfd_core usbcore video intel_agp usb_common soundcore intel_gtt evdev agpgart parport_pc wmi parport backlight
CR2: ffffc900009f5282
---[ end trace 0000000000000000 ]---
RIP: 0010:iwl_trans_pcie_tx+0x4dd/0xe60 [iwlwifi]
Code: 00 00 66 81 fa ff 0f 0f 87 42 09 00 00 3d ff 00 00 00 0f 8f 37 09 00 00 41 c1 e0 0c 41 09 d0 48 8d 14 b6 48 c1 e2 07 48 01 ca <66> 44 89 04 57 48 8d 0c 12 83 f8 3f 0f 8e 84 01 00 00 41 8b 85 80
RSP: 0018:ffffc900001c3b50 EFLAGS: 00010206
RAX: 00000000000000c1 RBX: ffff88810b180028 RCX: 00000000000000c1
RDX: 0000000000002141 RSI: 000000000000000d RDI: ffffc900009f1000
RBP: 0000000000000002 R08: 0000000000000025 R09: ffffffffa050fa60
R10: 00000000fbdbf4bc R11: 0000000000000082 R12: ffff88810e5ade40
R13: ffff88810af81588 R14: 000000000000001a R15: ffff888100dfe0c8
FS: 0000000000000000(0000) GS:ffff8881998c3000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: ffffc900009f5282 CR3: 0000000001e39000 CR4: 00000000000426f0
Kernel panic - not syncing: Fatal exception in interrupt
Kernel Offset: disabled
---[ end Kernel panic - not syncing: Fatal exception in interrupt ]---
Cc: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Fixes:
|
||
|
Johannes Berg
|
444020f4bf |
wifi: cfg80211: remove scan request n_channels counted_by
This reverts commit |
||
|
Johannes Berg
|
2aec790e66 |
ath.git update for v6.16-rc7
Fix an ath12k performance regression introduce in v6.16-rc1 -----BEGIN PGP SIGNATURE----- iHUEABYKAB0WIQQ/mtSHzPUi16IfDEksFbugiYzLewUCaHUQXwAKCRAsFbugiYzL ewsPAQCgAgDT3Fl/I+Bs5B35QbGvAwAooHNnLOnglvI8FTmBDAD+KlpZwKX0KBIK BT5k1yNw1KxlEEsqgX8KWd9wdR07uAg= =2H7l -----END PGP SIGNATURE----- Merge tag 'ath-current-20250714' of git://git.kernel.org/pub/scm/linux/kernel/git/ath/ath Jeff Johnson says: ================== ath.git update for v6.16-rc7 Fix an ath12k performance regression introduce in v6.16-rc1 ================== Signed-off-by: Johannes Berg <johannes.berg@intel.com> |
||
|
Sean Anderson
|
f0f2b992d8 |
net: phy: Don't register LEDs for genphy
If a PHY has no driver, the genphy driver is probed/removed directly in
phy_attach/detach. If the PHY's ofnode has an "leds" subnode, then the
LEDs will be (un)registered when probing/removing the genphy driver.
This could occur if the leds are for a non-generic driver that isn't
loaded for whatever reason. Synchronously removing the PHY device in
phy_detach leads to the following deadlock:
rtnl_lock()
ndo_close()
...
phy_detach()
phy_remove()
phy_leds_unregister()
led_classdev_unregister()
led_trigger_set()
netdev_trigger_deactivate()
unregister_netdevice_notifier()
rtnl_lock()
There is a corresponding deadlock on the open/register side of things
(and that one is reported by lockdep), but it requires a race while this
one is deterministic.
Generic PHYs do not support LEDs anyway, so don't bother registering
them.
Fixes:
|
||
|
Victor Nogueira
|
e18f348632 |
selftests/tc-testing: Create test cases for adding qdiscs to invalid qdisc parents
As described in a previous commit [1], Lion's patch [2] revealed an ancient bug in the qdisc API. Whenever a user tries to add a qdisc to an invalid parent (not a class, root, or ingress qdisc), the qdisc API will detect this after qdisc_create is called. Some qdiscs (like fq_codel, pie, and sfq) call functions (on their init callback) which assume the parent is valid, so qdisc_create itself may have caused a NULL pointer dereference in such cases. This commit creates 3 TDC tests that attempt to add fq_codel, pie and sfq qdiscs to invalid parents - Attempts to add an fq_codel qdisc to an hhf qdisc parent - Attempts to add a pie qdisc to a drr qdisc parent - Attempts to add an sfq qdisc to an inexistent hfsc classid (which would belong to a valid hfsc qdisc) [1] https://lore.kernel.org/all/20250707210801.372995-1-victor@mojatatu.com/ [2] https://lore.kernel.org/netdev/d912cbd7-193b-4269-9857-525bee8bbb6a@gmail.com/ Signed-off-by: Victor Nogueira <victor@mojatatu.com> Link: https://patch.msgid.link/20250712145035.705156-1-victor@mojatatu.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> |
||
|
Kuniyuki Iwashima
|
60ada4fe64 |
smc: Fix various oops due to inet_sock type confusion.
syzbot reported weird splats [0][1] in cipso_v4_sock_setattr() while
freeing inet_sk(sk)->inet_opt.
The address was freed multiple times even though it was read-only memory.
cipso_v4_sock_setattr() did nothing wrong, and the root cause was type
confusion.
The cited commit made it possible to create smc_sock as an INET socket.
The issue is that struct smc_sock does not have struct inet_sock as the
first member but hijacks AF_INET and AF_INET6 sk_family, which confuses
various places.
In this case, inet_sock.inet_opt was actually smc_sock.clcsk_data_ready(),
which is an address of a function in the text segment.
$ pahole -C inet_sock vmlinux
struct inet_sock {
...
struct ip_options_rcu * inet_opt; /* 784 8 */
$ pahole -C smc_sock vmlinux
struct smc_sock {
...
void (*clcsk_data_ready)(struct sock *); /* 784 8 */
The same issue for another field was reported before. [2][3]
At that time, an ugly hack was suggested [4], but it makes both INET
and SMC code error-prone and hard to change.
Also, yet another variant was fixed by a hacky commit
|
||
|
Phil Sutter
|
36a686c078 |
Revert "netfilter: nf_tables: Add notifications for hook changes"
This reverts commit
|