The 'resin' keys (usually connected to a volume-down button) are
generally not supposed to wake up the device from suspend, so explicitly
document a wakeup-source property to enable this wakeup behavior.
For 'pwrkey' the default stays that pressing the button does wake up the
device from suspend.
Signed-off-by: Luca Weiss <luca@lucaweiss.eu>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20250909-resin-wakeup-v1-1-46159940e02b@lucaweiss.eu
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Introduce support for the Hynitron CST816x series touchscreen controller
used for 240×240 1.28-inch Round LCD Display Module manufactured
by Waveshare Electronics. The driver is designed based on an Arduino
implementation marked as under MIT License. This driver is written
for a particular round display based on the CST816S controller, which
is not compatiable with existing driver for Hynitron controllers.
Signed-off-by: Oleh Kuzhylnyi <kuzhylol@gmail.com>
Link: https://lore.kernel.org/r/20250921125939.249788-2-kuzhylol@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Set the glitch threshold by DTS property and keep the existing default
behavior if the 'debounce-delay-us' is not present.
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://lore.kernel.org/r/20250923143746.2857292-7-dario.binacchi@amarulasolutions.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Support the debounce-delay-us property.
Drivers must convert this value to IPG clock cycles and map it to one of
the four discrete thresholds exposed by the TSC_DEBUG_MODE2 register:
0: 8191 IPG cycles
1: 4095 IPG cycles
2: 2047 IPG cycles
3: 1023 IPG cycles
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20250923143746.2857292-5-dario.binacchi@amarulasolutions.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Add support for glitch delay configuration. A detected signal is valid
only if it remains stable longer than the configured delay; otherwise,
it is considered a glitch.
This property was introduced for the i.MX6UL touchscreen controller (TSC),
which provides a hardware deglitch filter with four thresholds depending
on the IPG clock frequency. In this use case, the IPG clock rate is 66 MHz,
resulting in thresholds of 124 µs, 62 µs, 31 µs, and 15 µs, which requires
a property with microsecond-level resolution.
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20250923143746.2857292-4-dario.binacchi@amarulasolutions.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
"The data line must be sampled" makes much more sense than what was
previously written, and given that "s" and "d" are neighbors on the
QWERTY keybord, it was probably a typo.
Signed-off-by: J. Neuschäfer <j.ne@posteo.net>
Link: https://lore.kernel.org/r/20250923-ps2-typo-v1-1-03d2468acc32@posteo.net
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
This provides support for generic touchscreen configuration options like
swapped-x-y, min-x, min-y, size-x, size-y, etc.
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
Link: https://lore.kernel.org/r/20250909054903.11519-3-clamor95@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Since atmel,maxtouch describes touchscreens too, it should include common
touchscreen properties.
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://lore.kernel.org/r/20250909054903.11519-2-clamor95@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Convert Rohm BU21013 I2C touchscreen controller device tree binding to
json-schema.
Additional changes:
- Replace <supply_name>-supply with avdd-supply to match example and
existing DTS.
- Add reset-gpios in the example because it is required.
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://lore.kernel.org/r/20250918153630.2535208-1-dario.binacchi@amarulasolutions.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Change additionalProperties to unevaluatedProperties because it refs to
touchscreen.yaml.
Fix below CHECK_DTBS warnings:
arch/arm/boot/dts/nxp/imx/imx6dl-skov-revc-lt6.dtb: touchscreen (resistive-adc-touch): 'touchscreen-y-plate-ohms' does not match any of the regexes: '^pinctrl-[0-9]+$'
from schema $id: http://devicetree.org/schemas/input/touchscreen/resistive-adc-touch.yaml#
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://lore.kernel.org/r/20250910224402.994046-1-Frank.Li@nxp.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Support for platform data from dropped from twl in 4a346a03a6 ("mfd:
twl: Remove platform data support") and board files were dropped even
earlier. There are no in-kernel users of twl4030_keypad_data in the
kernel, and the driver supports configuration via generic device
properties.
Drop support of static platform data from the keypad driver.
Reviewed-by: Andreas Kemnade <andreas@kemnade.info>
Link: https://lore.kernel.org/r/tica7ol7xwv5tqb7hlkzu6wkiv4quxwrpqv6croe4wfnwvj6wv@4ob6ktqqi3cr
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Add a simple driver for the Himax HX852x(ES) touch panel controller,
with support for multi-touch and capacitive touch keys.
The driver is somewhat based on sample code from Himax. However, that
code was rather confusing, so that we spent a significant amount of
time just trying to understand the packet format and register commands.
In this driver they are described with clean structs and defines rather
than magic numbers and offset calculations.
Co-developed-by: Jonathan Albrieux <jonathan.albrieux@gmail.com>
Signed-off-by: Jonathan Albrieux <jonathan.albrieux@gmail.com>
Reviewed-by: Jeff LaBundy <jeff@labundy.com>
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Link: https://lore.kernel.org/r/20250915-hx852x-v5-2-b938182f1056@linaro.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Himax HX852x(ES) is a touch panel controller with optional support
for capacitive touch keys.
Unfortunately, the model naming is quite unclear and confusing. There
seems to be a distinction between models (e.g. HX8526) and the "series"
suffix (e.g. -A, -B, -C, -D, -E, -ES). But this doesn't seem to be
applied very consistently because e.g. HX8527-E(44) actually seems to
belong to the -ES series.
The compatible consists of the actual part number followed by the
"series" as fallback compatible. Typically only the latter will be
interesting for drivers as there is no relevant difference on the
driver side.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Link: https://lore.kernel.org/r/20250915-hx852x-v5-1-b938182f1056@linaro.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
-----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEEdrbJNaO+IJqU8IdIUa+KL4f8d2EFAmjKiPoACgkQUa+KL4f8
d2FARw//ah5Lic56BNTe3PExXqZcTfPyJT2hgQRer7pMZAigXzAt2nF/oVGNkMTN
VAlrA7wb6979J0JMO4m+LfuBJE5vdsbmjSVL8IfVZuTBnTrlNwM1UEHXLlv4GPnI
4l3xVKEmS5AF0g6aLek2y2d1T2vgh7ErL94Lb4AbqPsskSPwrdhEeYEc/VEUQoHJ
rt8OfN4JrMVVYofFqlOuAUdrdyOQ4NKOZf8DPkmat3ZF4QEu/x8UDecBuzsmQv+t
UDhYdOgBKWW42y9q525lBglGO/r35gHFhbxvV0Z8LlLxBLlTlys9krm6obFDhIW3
VBciLBUGNmuL7OnqjvFjV/Z9sb253iz67xtLInwhMBI2/WcSOufTtCYJ8IrERnsE
mlwy6uWEuWoMH3qLT5z02NPjHC2p02LXfGXG37JRrOrPAr30gKbXt4iOEWz66wbU
J1phVsoy2KzbrhZL/pWUGazQyRkbmNATj10/nYGFNsOVLYhcxArIwyhjqITviH+H
L10OnCP3LYkKK120Mr4fTHqrXb72NVBHWr6RH3QT69gvUwEJulMnQ+mvMCyouh7t
7NidHorEBSwA8daHvgj6hw9WD6WeoBwlPV5t8ns766P0L/X7E5px3WDS22evFRha
n2+jNp0Grb8QDvl6r0oZe2kI+csrax5ZsndRNjyJpeo5stWAsjo=
=fwWe
-----END PGP SIGNATURE-----
Merge tag 'ib-mfd-gpio-input-pinctrl-pwm-v6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd into next
Sync up with MFD tree to bring in support for MAX7360.
Add driver for Maxim Integrated MAX7360 keypad controller, providing
support for up to 64 keys, with a matrix of 8 columns and 8 rows.
Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Mathieu Dubois-Briand <mathieu.dubois-briand@bootlin.com>
Link: https://lore.kernel.org/r/20250824-mdb-max7360-support-v14-8-435cfda2b1ea@bootlin.com
Signed-off-by: Lee Jones <lee@kernel.org>
Add driver for Maxim Integrated MAX7360 GPIO/GPO controller.
Two sets of GPIOs are provided by the device:
- Up to 8 GPIOs, shared with the PWM and rotary encoder functionalities.
These GPIOs also provide interrupts on input changes.
- Up to 6 GPOs, on unused keypad columns pins.
Co-developed-by: Kamel Bouhara <kamel.bouhara@bootlin.com>
Signed-off-by: Kamel Bouhara <kamel.bouhara@bootlin.com>
Acked-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Mathieu Dubois-Briand <mathieu.dubois-briand@bootlin.com>
Link: https://lore.kernel.org/r/20250824-mdb-max7360-support-v14-7-435cfda2b1ea@bootlin.com
Signed-off-by: Lee Jones <lee@kernel.org>
Allows to populate the gpio_regmap_config structure with
init_valid_mask() callback to set on the final gpio_chip structure.
Reviewed-by: Michael Walle <mwalle@kernel.org>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Signed-off-by: Mathieu Dubois-Briand <mathieu.dubois-briand@bootlin.com>
Link: https://lore.kernel.org/r/20250824-mdb-max7360-support-v14-6-435cfda2b1ea@bootlin.com
Signed-off-by: Lee Jones <lee@kernel.org>
GPIO controller often have support for IRQ: allow to easily allocate
both gpio-regmap and regmap-irq in one operation.
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Signed-off-by: Mathieu Dubois-Briand <mathieu.dubois-briand@bootlin.com>
Link: https://lore.kernel.org/r/20250824-mdb-max7360-support-v14-5-435cfda2b1ea@bootlin.com
Signed-off-by: Lee Jones <lee@kernel.org>
Add driver for Maxim Integrated MAX7360 pinctrl on the PORT pins. Pins
can be used either for GPIO, PWM or rotary encoder functionalities.
Signed-off-by: Mathieu Dubois-Briand <mathieu.dubois-briand@bootlin.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20250824-mdb-max7360-support-v14-3-435cfda2b1ea@bootlin.com
Signed-off-by: Lee Jones <lee@kernel.org>
Add core driver to support MAX7360 i2c chip, multi function device
with keypad, GPIO, PWM, GPO and rotary encoder submodules.
Signed-off-by: Kamel Bouhara <kamel.bouhara@bootlin.com>
Co-developed-by: Mathieu Dubois-Briand <mathieu.dubois-briand@bootlin.com>
Signed-off-by: Mathieu Dubois-Briand <mathieu.dubois-briand@bootlin.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20250824-mdb-max7360-support-v14-2-435cfda2b1ea@bootlin.com
Signed-off-by: Lee Jones <lee@kernel.org>
Add device tree bindings for Maxim Integrated MAX7360 device with
support for keypad, rotary, gpios and pwm functionalities.
Reviewed-by: "Rob Herring (Arm)" <robh@kernel.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Mathieu Dubois-Briand <mathieu.dubois-briand@bootlin.com>
Link: https://lore.kernel.org/r/20250824-mdb-max7360-support-v14-1-435cfda2b1ea@bootlin.com
Signed-off-by: Lee Jones <lee@kernel.org>
There are no in-kernel users of spear kbd_platform_data in the kernel,
and the driver supports configuration via device tree, so drop
support of static platform data and move properties parsing from
OF-specific methods to generic ones.
Link: https://lore.kernel.org/r/vppjxui76im26uamznx7evm5lmbe3d6v3oxsa7mqyytykh4zm6@nhlf33v3hp6g
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
There are no in-kernel users of pxa27x_keypad_platform_data in the
kernel, and the driver supports configuration via device tree, so drop
support of static platform data and move properties parsing from
OF-specific methods to generic ones.
Link: https://lore.kernel.org/r/20250817215316.1872689-3-dmitry.torokhov@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Since commit 409fe0cea3 ("Input: goodix - add support for polling mode")
the interrupts property is optional, since at least the Linux kernel driver
supports also polling mode.
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20250904195727.168152-1-marek.vasut+renesas@mailbox.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Remove legacy binding egalax-ts.txt file. And add compatible string
eeti,egalax_ts and wakeup-gpios to eeti,exc3000.yaml. "eeti,egalax_ts" is
general compatible string, which is not preferred. But it is compatible
with old devices (older than 10 years) and existing driver in
drivers/input/touchscreen/egalax_ts.c.
Allow address 0x4 for eeti,egalax_ts.
Don't require touchscreen-size-x(y) for eeti,egalax_ts.
Keep the same restriction for existing compatible string.
Fix below DTB_CHECKS warnings:
arch/arm/boot/dts/nxp/imx/imx6dl-gw52xx.dtb: /soc/bus@2100000/i2c@21a8000/egalax_ts@4: failed to match any schema with compatible: ['eeti,egalax_ts']
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://lore.kernel.org/r/20250904171543.517650-1-Frank.Li@nxp.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
The binding currently expects exactly 5 keycodes, which matches the
chip's theoretical maximum but probably not the number of touch keys on
any phone using the IST3032C. Add a minItems value of 2 to prevent
dt-validate complaints.
Also add another example to make sure the linux,keycodes property is
checked.
Signed-off-by: Duje Mihanović <duje@dujemihanovic.xyz>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20250824-imagis-minitems-v1-1-cea9db55e87f@dujemihanovic.xyz
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
The touch resistance calculation in the tsc2007 driver is prone to
overflow if (z2 - z1) is large and also x is reasonably big. This
overflow results in the driver emitting input events when very little
touch pressure is applied. In these events the x and y coordinates can
be substantially off.
Avoid the overflow by using u64 when calculating resistance value.
Signed-off-by: Johannes Kirchmair <johannes.kirchmair@skidata.com>
Link: https://lore.kernel.org/r/20250129-fix_tsc_calculation_overflow-v2-1-9e51333496ad@skidata.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
In case tsc2007 is used as an ADC sensor there will be no interrupt
provided at all, so set up an interrupt only if one is present.
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
Link: https://lore.kernel.org/r/20250824091927.105121-3-clamor95@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Since pen GPIO request is optional, there is no reason to throw dev_warn if
such GPIO is not defined.
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
Link: https://lore.kernel.org/r/20250824091927.105121-2-clamor95@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
The 'wakeup-source' property is used by many devicetree files and is
also supported by the tsc2007_core driver.
Document it to avoid the following dt-schema warning:
'wakeup-source' does not match any of the regexes: '^pinctrl-[0-9]+$'
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20250822213245.125901-1-festevam@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
-----BEGIN PGP SIGNATURE-----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=VecX
-----END PGP SIGNATURE-----
Merge tag 'ib-mfd-input-v6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd into next
Sync up with MFD tree to bring in support for tps6594.
Use comma between vendor-prefix and chip name as it is common.
Signed-off-by: Andreas Kemnade <andreas@kemnade.info>
Fixes: 45601c66b5 ("dt-bindings: input: touchscreen: convert tsc2007.txt to yaml format")
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20250830085326.36120-1-akemnade@kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Add a system level power-off handler if the "system-power-controller"
flag is set for this device in the device tree.
A power-off request is triggered by writing the TRIGGER_I2C_0 bit (which
is actually just a convention and really depends on the freely
programmable FSM).
Co-developed-by: Job Sava <jsava@criticallink.com>
Signed-off-by: Job Sava <jsava@criticallink.com>
Signed-off-by: Michael Walle <mwalle@kernel.org>
Link: https://lore.kernel.org/r/20250826134631.1499936-4-mwalle@kernel.org
Signed-off-by: Lee Jones <lee@kernel.org>
The PMIC has a multi-function pin PB/EN/VSENSE. If it is configured as
push-button (PB), add the corresponding device for it.
Co-developed-by: Job Sava <jsava@criticallink.com>
Signed-off-by: Job Sava <jsava@criticallink.com>
Signed-off-by: Michael Walle <mwalle@kernel.org>
Link: https://lore.kernel.org/r/20250826134631.1499936-3-mwalle@kernel.org
Signed-off-by: Lee Jones <lee@kernel.org>
TPS6594 defines two interrupts for the power button one for push and
one for release.
This driver is very simple in that it maps the push interrupt to a key
input and the release interrupt to a key release.
Signed-off-by: Job Sava <jsava@criticallink.com>
Signed-off-by: Michael Walle <mwalle@kernel.org>
Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Link: https://lore.kernel.org/r/20250826134631.1499936-2-mwalle@kernel.org
Signed-off-by: Lee Jones <lee@kernel.org>
Convert lpc32xx-key.txt to yaml format.
Additional changes:
- set maximum of key-row(column) to 4.
- add ref to matrix-keymap.yaml.
Reviewed-by: Vladimir Zapolskiy <vz@mleia.com>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://lore.kernel.org/r/20250818183814.3603308-1-Frank.Li@nxp.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
