Rework the memory usage of the cca findcard() implementation:
- findcard does not allocate memory for the list of apqns
any more.
- the callers are now responsible to provide an array of
apqns to store the matching apqns into.
Signed-off-by: Harald Freudenberger <freude@linux.ibm.com>
Reviewed-by: Holger Dengler <dengler@linux.ibm.com>
Link: https://lore.kernel.org/r/20250424133619.16495-14-freude@linux.ibm.com
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Remove the caching of the CCA and EP11 card and domain info.
In nearly all places where the card or domain info is fetched
the verify param was enabled and thus the cache was bypassed.
The only real place where info from the cache was used was
in the sysfs pseudo files in cases where the card/queue was
switched to "offline". All other callers insisted on getting
fresh info and thus a communication to the card was enforced.
Signed-off-by: Harald Freudenberger <freude@linux.ibm.com>
Reviewed-by: Holger Dengler <dengler@linux.ibm.com>
Link: https://lore.kernel.org/r/20250424133619.16495-13-freude@linux.ibm.com
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
The static function findcard() and the zcrypt cca_findcard()
function are both not used any more. Remove this outdated
code and an internal function only called by these.
Signed-off-by: Harald Freudenberger <freude@linux.ibm.com>
Reviewed-by: Holger Dengler <dengler@linux.ibm.com>
Link: https://lore.kernel.org/r/20250424133619.16495-12-freude@linux.ibm.com
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Introduce a pre-allocated device status array memory together with
a mutex controlling the occupation to be used by the findcard()
function. Limit the device status array to max 128 cards and max
128 domains to reduce the size of this pre-allocated memory to 64 KB.
Signed-off-by: Harald Freudenberger <freude@linux.ibm.com>
Reviewed-by: Holger Dengler <dengler@linux.ibm.com>
Link: https://lore.kernel.org/r/20250424133619.16495-11-freude@linux.ibm.com
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Introduce a pre-allocated device status array memory together with
a mutex controlling the occupation to be used by the findcard2()
function. Limit the device status array to max 128 cards and max
128 domains to reduce the size of this pre-allocated memory to 64 KB.
Signed-off-by: Harald Freudenberger <freude@linux.ibm.com>
Reviewed-by: Holger Dengler <dengler@linux.ibm.com>
Link: https://lore.kernel.org/r/20250424133619.16495-10-freude@linux.ibm.com
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Rework the existing function zcrypt_device_status_mask_ext():
Add two new parameters to provide upper limits for
cards and queues. The existing implementation needed an
array of 256 * 256 * 4 = 256 KB which is really huge. The
reworked function is more flexible in the sense that the
caller can decide the upper limit for cards and domains to
be stored into the status array. So for example a caller may
decide to only query for cards 0...127 and queues 0...127
and thus only an array of size 128 * 128 * 4 = 64 KB is needed.
Signed-off-by: Harald Freudenberger <freude@linux.ibm.com>
Reviewed-by: Holger Dengler <dengler@linux.ibm.com>
Link: https://lore.kernel.org/r/20250424133619.16495-9-freude@linux.ibm.com
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Introduce a cprb mempool for the zcrypt ep11 misc functions
(zcrypt_ep11misc.*) do some preparation rework to support
a do-not-allocate path through some zcrypt ep11 misc functions.
The mempool is controlled by the zcrypt module parameter
"mempool_threshold" which shall control the minimal amount
of memory items for CCA and EP11.
The mempool shall support "mempool_threshold" requests/replies
in parallel which means for EP11 to hold a send and receive
buffer memory per request. Each of this cprb space items is
limited to 8 KB. So by default the mempool consumes
5 * 2 * 8KB = 80KB
If the mempool is depleted upon one ep11 misc functions is
called with the ZCRYPT_XFLAG_NOMEMALLOC xflag set, the function
will fail with -ENOMEM and the caller is responsible for taking
further actions.
This is only part of an rework to support a new xflag
ZCRYPT_XFLAG_NOMEMALLOC but not yet complete.
Signed-off-by: Harald Freudenberger <freude@linux.ibm.com>
Reviewed-by: Holger Dengler <dengler@linux.ibm.com>
Link: https://lore.kernel.org/r/20250424133619.16495-8-freude@linux.ibm.com
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Introduce a new module parameter "zcrypt_mempool_threshold"
for the zcrypt module. This parameter controls the minimal
amount of mempool items which are pre-allocated for urgent
requests/replies and will be used with the support for the
new xflag ZCRYPT_XFLAG_NOMEMALLOC. The default value of 5
shall provide enough memory items to support up to 5 requests
(and their associated reply) in parallel. The minimum value
is 1 and is checked in zcrypt module init().
If the mempool is depleted upon one cca misc functions is called
with the named xflag set, the function will fail with -ENOMEM
and the caller is responsible for taking further actions.
For CCA each mempool item is 16KB, as a CCA CPRB needs to
hold the request and the reply. The pool items only support
requests/replies with a limit of about 8KB.
So by default the CCA mempool consumes
5 * 16KB = 80KB
This is only part of an rework to support a new xflag
ZCRYPT_XFLAG_NOMEMALLOC but not yet complete.
Signed-off-by: Harald Freudenberger <freude@linux.ibm.com>
Reviewed-by: Holger Dengler <dengler@linux.ibm.com>
Link: https://lore.kernel.org/r/20250424133619.16495-7-freude@linux.ibm.com
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Introduce a new flag parameter for the both cprb send functions
zcrypt_send_cprb() and zcrypt_send_ep11_cprb(). This new
xflags parameter ("execution flags") shall be used to provide
execution hints and flags for this crypto request.
There are two flags implemented to be used with these functions:
* ZCRYPT_XFLAG_USERSPACE - indicates to the lower layers that
all the ptrs address userspace. So when construction the ap msg
copy_from_user() is to be used. If this flag is NOT set, the ptrs
address kernel memory and thus memcpy() is to be used.
* ZCRYPT_XFLAG_NOMEMALLOC - indicates that this task must not
allocate memory which may be allocated with io operations.
For the AP bus and zcrypt message layer this means:
* The ZCRYPT_XFLAG_USERSPACE is mapped to the already existing
bool variable "userspace" which is propagated to the zcrypt
proto implementations.
* The ZCRYPT_XFLAG_NOMEMALLOC results in setting the AP flag
AP_MSG_FLAG_MEMPOOL when the AP msg buffer is initialized.
Signed-off-by: Harald Freudenberger <freude@linux.ibm.com>
Reviewed-by: Holger Dengler <dengler@linux.ibm.com>
Link: https://lore.kernel.org/r/20250424133619.16495-6-freude@linux.ibm.com
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
If there is a target list of APQNs given when an CPRB is
to be send via zcrypt_send_ep11_cprb() there is always a
kmalloc() done and the targets are copied via z_copy_from_user.
As there are callers from kernel space (zcrypt_ep11misc.c)
which signal this via the userspace parameter improve this
code to directly use the given target list in case of
kernelspace thus removing the unnecessary memory alloc
and mem copy.
Signed-off-by: Harald Freudenberger <freude@linux.ibm.com>
Reviewed-by: Holger Dengler <dengler@linux.ibm.com>
Link: https://lore.kernel.org/r/20250424133619.16495-5-freude@linux.ibm.com
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
There is a need for a do-not-allocate-memory path through the AP bus
layer. The pkey layer may be triggered via the in-kernel interface
from a protected key crypto algorithm (namely PAES) to convert a
secure key into a protected key. This happens in a workqueue context,
so sleeping is allowed but memory allocations causing IO operations
are not permitted.
To accomplish this, an AP message memory pool with pre-allocated space
is established. When ap_init_apmsg() with use_mempool set to true is
called, instead of kmalloc() the ap message buffer is allocated from
the ap_msg_pool. This pool only holds a limited amount of buffers:
ap_msg_pool_min_items with the item size AP_DEFAULT_MAX_MSG_SIZE and
exactly one of these items (if available) is returned if
ap_init_apmsg() with the use_mempool arg set to true is called. When
this pool is exhausted and use_mempool is set true, ap_init_apmsg()
returns -ENOMEM without any attempt to allocate memory and the caller
has to deal with that.
Default values for this mempool of ap messages is:
* Each buffer is 12KB (that is the default AP bus size
and all the urgent messages should fit into this space).
* Minimum items held in the pool is 8. This value is adjustable
via module parameter ap.msgpool_min_items.
The zcrypt layer may use this flag to indicate to the ap bus that the
processing path for this message should not allocate memory but should
use pre-allocated memory buffer instead. This is to prevent deadlocks
with crypto and io for example with encrypted swap volumes.
Signed-off-by: Harald Freudenberger <freude@linux.ibm.com>
Reviewed-by: Holger Dengler <dengler@linux.ibm.com>
Link: https://lore.kernel.org/r/20250424133619.16495-4-freude@linux.ibm.com
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Slight rework on the way how AP message buffers are allocated.
Instead of having multiple places with kmalloc() calls all
the AP message buffers are now allocated and freed on exactly
one place: ap_init_apmsg() allocates the current AP bus max
limit of ap_max_msg_size (defaults to 12KB). The AP message
buffer is then freed in ap_release_apmsg().
Signed-off-by: Harald Freudenberger <freude@linux.ibm.com>
Reviewed-by: Holger Dengler <dengler@linux.ibm.com>
Link: https://lore.kernel.org/r/20250424133619.16495-3-freude@linux.ibm.com
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Move the very small response_type struct into struct ap_msg.
So there is no need to kmalloc this tiny struct with each
ap message preparation.
Signed-off-by: Harald Freudenberger <freude@linux.ibm.com>
Reviewed-by: Holger Dengler <dengler@linux.ibm.com>
Link: https://lore.kernel.org/r/20250424133619.16495-2-freude@linux.ibm.com
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
In CPUMF attribute definitions for z15 all CPUMF attributes
have configuration values of the form 0x0[0-9a-f]{3} .
However 2 defines do not match this scheme, they have two leading
zeroes instead of one. Adjust this. No functional change.
Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
The third argument of strscpy() is optional and can be left away iff
the destination is an array and the maximum size of the copy is the
size of destination.
Remove the third argument for those cases where this is possible.
Acked-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Rename strncpy_skip_quote() to strscpy_skip_quote() and change its
implementation so that the destination string is always NUL terminated.
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
There are hardly any strncpy() users left, therefore drop the
optimized s390 variant.
Acked-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
The s390 specific diag288_wdt watchdog driver makes use of the virtual
watchdog timer, which is available in most machine configurations.
If executing the diagnose instruction with subcode 0x288 results in an
exception the watchdog timer is not available, otherwise it is available.
In order to allow module autoload of the diag288_wdt module, move the
detection of the virtual watchdog timer to early boot code, and provide
its availability as a cpu feature.
This allows to make use of module_cpu_feature_match() to automatically load
the module iff the virtual watchdog timer is available.
Suggested-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Tested-by: Mete Durlu <meted@linux.ibm.com>
Acked-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20250410095036.1525057-1-hca@linux.ibm.com
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Replace the last 2 usages of strncpy() in s390 code with strscpy().
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Add a simple sized_strscpy() implementation to allow the use of strscpy()
in the decompressor.
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Select ARCH_WANT_IRQS_OFF_ACTIVATE_MM so that activate_mm() is called with
irqs disabled. This allows to call switch_mm_irqs_off() instead of
switch_mm() and saves two local_irq_save() / local_irq_restore() pairs.
Reviewed-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Reduce system call overhead time (round trip time for invoking a
non-existent system call) by 25%.
With the removal of set_fs() [1] lazy control register handling was removed
in order to keep kernel entry and exit simple. However this made system
calls slower.
With the conversion to generic entry [2] and numerous follow up changes
which simplified the entry code significantly, adding support for lazy asce
handling doesn't add much complexity to the entry code anymore.
In particular this means:
- On kernel entry the primary asce is not modified and contains the user
asce
- Kernel accesses which require secondary-space mode (for example futex
operations) are surrounded by enable_sacf_uaccess() and
disable_sacf_uaccess() calls. enable_sacf_uaccess() sets the primary asce
to kernel asce so that the sacf instruction can be used to switch to
secondary-space mode. The primary asce is changed back to user asce with
disable_sacf_uaccess().
The state of the control register which contains the primary asce is
reflected with a new TIF_ASCE_PRIMARY bit. This is required on context
switch so that the correct asce is restored for the scheduled in process.
In result address spaces are now setup like this:
CPU running in | %cr1 ASCE | %cr7 ASCE | %cr13 ASCE
-----------------------------|-----------|-----------|-----------
user space | user | user | kernel
kernel (no sacf) | user | user | kernel
kernel (during sacf uaccess) | kernel | user | kernel
kernel (kvm guest execution) | guest | user | kernel
In result cr1 control register content is not changed except for:
- futex system calls
- legacy s390 PCI system calls
- the kvm specific cmpxchg_user_key() uaccess helper
This leads to faster system call execution.
[1] 87d5986345 ("s390/mm: remove set_fs / rework address space handling")
[2] 56e62a7370 ("s390: convert to generic entry")
Reviewed-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
syzbot failures and fixing a stale file handing refeencing an inode
previously used as a regular file, but which has been deleted and
reused as an ea_inode would result in ext4 erroneously consider this a
case of fs corrupotion.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEK2m5VNv+CHkogTfJ8vlZVpUNgaMFAmf7r3YACgkQ8vlZVpUN
gaPl9QgApwE5BAQdO6miW0sDMPj5b4sMc25aG4OPlfKhFqiIJB0Ub4zC2n0OFnaf
HXk8P5oVeepH9ciTnYFF30X20Ythzjwmd9j5eyq2wsfYASQUjfcvmR9WovbqZtGQ
3Zerd9QFp7SvZa+K4sADBhEb/7HAnxDGfiqSQptY6WQTwD+it1bnuhmzG0m6AH4m
R1ItREDx7D2QrudDToFBd8XQ+FgRETZ8Qrs7PqIznw/dBNMdHRnAiw2eiyuoPU/S
T8cmCxii3Z9sJ6LtohKYuWOmOmdxg951V5ZcekVRuaFSljSUsRsIplO7OlaMvQDs
9vGVKiiZLdU2B0Wd90IeQUdJmP4xPg==
=I8qx
-----END PGP SIGNATURE-----
Merge tag 'ext4_for_linus-6.15-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4
Pull ext4 fixes from Ted Ts'o:
"A few more miscellaneous ext4 bug fixes and cleanups including some
syzbot failures and fixing a stale file handing refeencing an inode
previously used as a regular file, but which has been deleted and
reused as an ea_inode would result in ext4 erroneously considering
this a case of fs corruption"
* tag 'ext4_for_linus-6.15-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4:
ext4: fix off-by-one error in do_split
ext4: make block validity check resistent to sb bh corruption
ext4: avoid -Wflex-array-member-not-at-end warning
Documentation: ext4: Add fields to ext4_super_block documentation
ext4: don't treat fhandle lookup of ea_inode as FS corruption
Add missing stubs for mutex and free_reserved_area() to memblock tests
-----BEGIN PGP SIGNATURE-----
iQFEBAABCgAuFiEEeOVYVaWZL5900a/pOQOGJssO/ZEFAmf7kxgQHHJwcHRAa2Vy
bmVsLm9yZwAKCRA5A4Ymyw79kbv4B/0XhZGFhmZt7yXlOU6ywPB94nLgH7lWkbHe
Kxca0M7/77Vd19nRaHq9zIO2SQkkz3mKQNuSTsBLZLUrRi/oivWN9jFlaXMytLcT
v2XeX7HCX4FqSAKbA0fu130/qIyHJAyy+cUIuAhy/043eE7mtj99yCHkwza7S4US
gL1kFNBH9hLuLhm7Pnq7yBK6Wx2kuFhMwG6Deb6AWrSJ1pfv/wMfzwXfBiZ2oy/8
CfDdeSXiIKoj9CDMnwrbVADZxVFvCC9YooatQoJ/Y+35MwN5XQyJFtS0rXvEHkvf
jS+HQCUXKxoVeZKVhKnauZ8h1NgLzyhSvUB9iPBo/fdyGDXpU8OO
=DpcO
-----END PGP SIGNATURE-----
Merge tag 'fixes-2025-04-13' of git://git.kernel.org/pub/scm/linux/kernel/git/rppt/memblock
Pull memblock fix from Mike Rapoport:
"Fix build of memblock test.
Add missing stubs for mutex and free_reserved_area() to memblock
tests"
* tag 'fixes-2025-04-13' of git://git.kernel.org/pub/scm/linux/kernel/git/rppt/memblock:
memblock tests: Fix mutex related build error
Syzkaller detected a use-after-free issue in ext4_insert_dentry that was
caused by out-of-bounds access due to incorrect splitting in do_split.
BUG: KASAN: use-after-free in ext4_insert_dentry+0x36a/0x6d0 fs/ext4/namei.c:2109
Write of size 251 at addr ffff888074572f14 by task syz-executor335/5847
CPU: 0 UID: 0 PID: 5847 Comm: syz-executor335 Not tainted 6.12.0-rc6-syzkaller-00318-ga9cda7c0ffed #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 10/30/2024
Call Trace:
<TASK>
__dump_stack lib/dump_stack.c:94 [inline]
dump_stack_lvl+0x241/0x360 lib/dump_stack.c:120
print_address_description mm/kasan/report.c:377 [inline]
print_report+0x169/0x550 mm/kasan/report.c:488
kasan_report+0x143/0x180 mm/kasan/report.c:601
kasan_check_range+0x282/0x290 mm/kasan/generic.c:189
__asan_memcpy+0x40/0x70 mm/kasan/shadow.c:106
ext4_insert_dentry+0x36a/0x6d0 fs/ext4/namei.c:2109
add_dirent_to_buf+0x3d9/0x750 fs/ext4/namei.c:2154
make_indexed_dir+0xf98/0x1600 fs/ext4/namei.c:2351
ext4_add_entry+0x222a/0x25d0 fs/ext4/namei.c:2455
ext4_add_nondir+0x8d/0x290 fs/ext4/namei.c:2796
ext4_symlink+0x920/0xb50 fs/ext4/namei.c:3431
vfs_symlink+0x137/0x2e0 fs/namei.c:4615
do_symlinkat+0x222/0x3a0 fs/namei.c:4641
__do_sys_symlink fs/namei.c:4662 [inline]
__se_sys_symlink fs/namei.c:4660 [inline]
__x64_sys_symlink+0x7a/0x90 fs/namei.c:4660
do_syscall_x64 arch/x86/entry/common.c:52 [inline]
do_syscall_64+0xf3/0x230 arch/x86/entry/common.c:83
entry_SYSCALL_64_after_hwframe+0x77/0x7f
</TASK>
The following loop is located right above 'if' statement.
for (i = count-1; i >= 0; i--) {
/* is more than half of this entry in 2nd half of the block? */
if (size + map[i].size/2 > blocksize/2)
break;
size += map[i].size;
move++;
}
'i' in this case could go down to -1, in which case sum of active entries
wouldn't exceed half the block size, but previous behaviour would also do
split in half if sum would exceed at the very last block, which in case of
having too many long name files in a single block could lead to
out-of-bounds access and following use-after-free.
Found by Linux Verification Center (linuxtesting.org) with Syzkaller.
Cc: stable@vger.kernel.org
Fixes: 5872331b3d ("ext4: fix potential negative array index in do_split()")
Signed-off-by: Artem Sadovnikov <a.sadovnikov@ispras.ru>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://patch.msgid.link/20250404082804.2567-3-a.sadovnikov@ispras.ru
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Block validity checks need to be skipped in case they are called
for journal blocks since they are part of system's protected
zone.
Currently, this is done by checking inode->ino against
sbi->s_es->s_journal_inum, which is a direct read from the ext4 sb
buffer head. If someone modifies this underneath us then the
s_journal_inum field might get corrupted. To prevent against this,
change the check to directly compare the inode with journal->j_inode.
**Slight change in behavior**: During journal init path,
check_block_validity etc might be called for journal inode when
sbi->s_journal is not set yet. In this case we now proceed with
ext4_inode_block_valid() instead of returning early. Since systems zones
have not been set yet, it is okay to proceed so we can perform basic
checks on the blocks.
Suggested-by: Baokun Li <libaokun1@huawei.com>
Reviewed-by: Baokun Li <libaokun1@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Zhang Yi <yi.zhang@huawei.com>
Signed-off-by: Ojaswin Mujoo <ojaswin@linux.ibm.com>
Link: https://patch.msgid.link/0c06bc9ebfcd6ccfed84a36e79147bf45ff5adc1.1743142920.git.ojaswin@linux.ibm.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
-Wflex-array-member-not-at-end was introduced in GCC-14, and we are
getting ready to enable it, globally.
Use the `DEFINE_RAW_FLEX()` helper for an on-stack definition of
a flexible structure where the size of the flexible-array member
is known at compile-time, and refactor the rest of the code,
accordingly.
So, with these changes, fix the following warning:
fs/ext4/mballoc.c:3041:40: warning: structure containing a flexible array member is not at the end of another structure [-Wflex-array-member-not-at-end]
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Reviewed-by: Kees Cook <kees@kernel.org>
Link: https://patch.msgid.link/Z-SF97N3AxcIMlSi@kspp
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Documentation and implementation of the ext4 super block have
slightly diverged: Padding has been removed in order to make room for
new fields that are still missing in the documentation.
Add the new fields s_encryption_level, s_first_error_errorcode,
s_last_error_errorcode to the documentation of the ext4 super block.
Fixes: f542fbe8d5 ("ext4 crypto: reserve codepoints used by the ext4 encryption feature")
Fixes: 878520ac45 ("ext4: save the error code which triggered an ext4_error() in the superblock")
Signed-off-by: Tom Vierjahn <tom.vierjahn@acm.org>
Reviewed-by: Ojaswin Mujoo <ojaswin@linux.ibm.com>
Link: https://patch.msgid.link/20250324221004.5268-1-tom.vierjahn@acm.org
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
- Hide get_vm_area() from MMUless builds
The function get_vm_area() is not defined when CONFIG_MMU is not defined.
Hide that function within #ifdef CONFIG_MMU.
- Fix output of synthetic events when they have dynamic strings
The print fmt of the synthetic event's format file use to have "%.*s" for
dynamic size strings even though the user space exported arguments had
only __get_str() macro that provided just a nul terminated string. This
was fixed so that user space could parse this properly. But the reason
that it had "%.*s" was because internally it provided the maximum size of
the string as one of the arguments. The fix that replaced "%.*s" with "%s"
caused the trace output (when the kernel reads the event) to write
"(efault)" as it would now read the length of the string as "%s".
As the string provided is always nul terminated, there's no reason for the
internal code to use "%.*s" anyway. Just remove the length argument to
match the "%s" that is now in the format.
- Fix the ftrace subops hash logic of the manager ops hash
The function_graph uses the ftrace subops code. The subops code is a way
to have a single ftrace_ops registered with ftrace to determine what
functions will call the ftrace_ops callback. More than one user of
function graph can register a ftrace_ops with it. The function graph
infrastructure will then add this ftrace_ops as a subops with the main
ftrace_ops it registers with ftrace. This is because the functions will
always call the function graph callback which in turn calls the subops
ftrace_ops callbacks.
The main ftrace_ops must add a callback to all the functions that the
subops want a callback from. When a subops is registered, it will update
the main ftrace_ops hash to include the functions it wants. This is the
logic that was broken.
The ftrace_ops hash has a "filter_hash" and a "notrace_hash" were all the
functions in the filter_hash but not in the notrace_hash are attached by
ftrace. The original logic would have the main ftrace_ops filter_hash be a
union of all the subops filter_hashes and the main notrace_hash would be a
intersect of all the subops filter hashes. But this was incorrect because
the notrace hash depends on the filter_hash it is associated to and not
the union of all filter_hashes.
Instead, when a subops is added, just include all the functions of the
subops hash that are in its filter_hash but not in its notrace_hash. The
main subops hash should not use its notrace hash, unless all of its subops
hashes have an empty filter_hash (which means to attach to all functions),
and then, and only then, the main ftrace_ops notrace hash can be the
intersect of all the subops hashes.
This not only fixes the bug, but also simplifies the code.
- Add a selftest to better test the subops filtering
Add a selftest that would catch the bug fixed by the above change.
- Fix extra newline printed in function tracing with retval
The function parameter code changed the output logic slightly and called
print_graph_retval() and also printed a newline. The print_graph_retval()
also prints a newline which caused blank lines to be printed in the
function graph tracer when retval was added. This caused one of the
selftests to fail if retvals were enabled. Instead remove the new line
output from print_graph_retval() and have the callers always print the
new line so that it doesn't have to do special logic if it calls
print_graph_retval() or not.
- Fix out-of-bound memory access in the runtime verifier
When rv_is_container_monitor() is called on the last entry on the link
list it references the next entry, which is the list head and causes an
out-of-bound memory access.
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCZ/rXQxQccm9zdGVkdEBn
b29kbWlzLm9yZwAKCRAp5XQQmuv6qoj7AQC0C2awpJSUIRj91qjPtMYuNUE3AVpB
EEZEkt19LfE//gEA1fOx3Cors/LrY9dthn/3LMKL23vo9c4i0ffhs2X+1gE=
=XJL5
-----END PGP SIGNATURE-----
Merge tag 'trace-v6.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull tracing fixes from Steven Rostedt:
- Hide get_vm_area() from MMUless builds
The function get_vm_area() is not defined when CONFIG_MMU is not
defined. Hide that function within #ifdef CONFIG_MMU.
- Fix output of synthetic events when they have dynamic strings
The print fmt of the synthetic event's format file use to have "%.*s"
for dynamic size strings even though the user space exported
arguments had only __get_str() macro that provided just a nul
terminated string. This was fixed so that user space could parse this
properly.
But the reason that it had "%.*s" was because internally it provided
the maximum size of the string as one of the arguments. The fix that
replaced "%.*s" with "%s" caused the trace output (when the kernel
reads the event) to write "(efault)" as it would now read the length
of the string as "%s".
As the string provided is always nul terminated, there's no reason
for the internal code to use "%.*s" anyway. Just remove the length
argument to match the "%s" that is now in the format.
- Fix the ftrace subops hash logic of the manager ops hash
The function_graph uses the ftrace subops code. The subops code is a
way to have a single ftrace_ops registered with ftrace to determine
what functions will call the ftrace_ops callback. More than one user
of function graph can register a ftrace_ops with it. The function
graph infrastructure will then add this ftrace_ops as a subops with
the main ftrace_ops it registers with ftrace. This is because the
functions will always call the function graph callback which in turn
calls the subops ftrace_ops callbacks.
The main ftrace_ops must add a callback to all the functions that the
subops want a callback from. When a subops is registered, it will
update the main ftrace_ops hash to include the functions it wants.
This is the logic that was broken.
The ftrace_ops hash has a "filter_hash" and a "notrace_hash" where
all the functions in the filter_hash but not in the notrace_hash are
attached by ftrace. The original logic would have the main ftrace_ops
filter_hash be a union of all the subops filter_hashes and the main
notrace_hash would be a intersect of all the subops filter hashes.
But this was incorrect because the notrace hash depends on the
filter_hash it is associated to and not the union of all
filter_hashes.
Instead, when a subops is added, just include all the functions of
the subops hash that are in its filter_hash but not in its
notrace_hash. The main subops hash should not use its notrace hash,
unless all of its subops hashes have an empty filter_hash (which
means to attach to all functions), and then, and only then, the main
ftrace_ops notrace hash can be the intersect of all the subops
hashes.
This not only fixes the bug, but also simplifies the code.
- Add a selftest to better test the subops filtering
Add a selftest that would catch the bug fixed by the above change.
- Fix extra newline printed in function tracing with retval
The function parameter code changed the output logic slightly and
called print_graph_retval() and also printed a newline. The
print_graph_retval() also prints a newline which caused blank lines
to be printed in the function graph tracer when retval was added.
This caused one of the selftests to fail if retvals were enabled.
Instead remove the new line output from print_graph_retval() and have
the callers always print the new line so that it doesn't have to do
special logic if it calls print_graph_retval() or not.
- Fix out-of-bound memory access in the runtime verifier
When rv_is_container_monitor() is called on the last entry on the
link list it references the next entry, which is the list head and
causes an out-of-bound memory access.
* tag 'trace-v6.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
rv: Fix out-of-bound memory access in rv_is_container_monitor()
ftrace: Do not have print_graph_retval() add a newline
tracing/selftest: Add test to better test subops filtering of function graph
ftrace: Fix accounting of subop hashes
ftrace: Properly merge notrace hashes
tracing: Do not add length to print format in synthetic events
tracing: Hide get_vm_area() from MMUless builds
-----BEGIN PGP SIGNATURE-----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=Mezb
-----END PGP SIGNATURE-----
Merge tag 'bpf-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf
Pull bpf fixes from Alexei Starovoitov:
- Followup fixes for resilient spinlock (Kumar Kartikeya Dwivedi):
- Make res_spin_lock test less verbose, since it was spamming BPF
CI on failure, and make the check for AA deadlock stronger
- Fix rebasing mistake and use architecture provided
res_smp_cond_load_acquire
- Convert BPF maps (queue_stack and ringbuf) to resilient spinlock
to address long standing syzbot reports
- Make sure that classic BPF load instruction from SKF_[NET|LL]_OFF
offsets works when skb is fragmeneted (Willem de Bruijn)
* tag 'bpf-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf:
bpf: Convert ringbuf map to rqspinlock
bpf: Convert queue_stack map to rqspinlock
bpf: Use architecture provided res_smp_cond_load_acquire
selftests/bpf: Make res_spin_lock AA test condition stronger
selftests/net: test sk_filter support for SKF_NET_OFF on frags
bpf: support SKF_NET_OFF and SKF_LL_OFF on skb frags
selftests/bpf: Make res_spin_lock test less verbose
When rv_is_container_monitor() is called on the last monitor in
rv_monitors_list, KASAN yells:
BUG: KASAN: global-out-of-bounds in rv_is_container_monitor+0x101/0x110
Read of size 8 at addr ffffffff97c7c798 by task setup/221
The buggy address belongs to the variable:
rv_monitors_list+0x18/0x40
This is due to list_next_entry() is called on the last entry in the list.
It wraps around to the first list_head, and the first list_head is not
embedded in struct rv_monitor_def.
Fix it by checking if the monitor is last in the list.
Cc: stable@vger.kernel.org
Cc: Gabriele Monaco <gmonaco@redhat.com>
Fixes: cb85c660fc ("rv: Add option for nested monitors and include sched")
Link: https://lore.kernel.org/e85b5eeb7228bfc23b8d7d4ab5411472c54ae91b.1744355018.git.namcao@linutronix.de
Signed-off-by: Nam Cao <namcao@linutronix.de>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
The retval and retaddr options for function_graph tracer will add a
comment at the end of a function for both leaf and non leaf functions that
looks like:
__wake_up_common(); /* ret=0x1 */
} /* pick_next_task_fair ret=0x0 */
The function print_graph_retval() adds a newline after the "*/". But if
that's not called, the caller function needs to make sure there's a
newline added.
This is confusing and when the function parameters code was added, it
added a newline even when calling print_graph_retval() as the fact that
the print_graph_retval() function prints a newline isn't obvious.
This caused an extra newline to be printed and that made it fail the
selftests when the retval option was set, as the selftests were not
expecting blank lines being injected into the trace.
Instead of having print_graph_retval() print a newline, just have the
caller always print the newline regardless if it calls print_graph_retval()
or not. This not only fixes this bug, but it also simplifies the code.
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Link: https://lore.kernel.org/20250411133015.015ca393@gandalf.local.home
Reported-by: Mark Brown <broonie@kernel.org>
Tested-by: Mark Brown <broonie@kernel.org>
Closes: https://lore.kernel.org/all/ccc40f2b-4b9e-4abd-8daf-d22fce2a86f0@sirena.org.uk/
Fixes: ff5c9c576e ("ftrace: Add support for function argument to graph tracer")
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
The first three patches handle clk_get_rate() returning 0 (which might
happen for example if the CCF is disabled). The first of these was found
because this triggered a warning with clang, the two others by looking
for similar issues in other drivers. Similar patches were merged earlier
for v6.15-rc1 in commit 92b71befc3 ("Merge tag
'objtool-urgent-2025-04-01' of
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip").
The remaining three fixes address issues in the new waveform pwm API.
Now that I worked on this a bit more, the finer details and corner cases
are better understood and the code is fixed accordingly.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEP4GsaTp6HlmJrf7Tj4D7WH0S/k4FAmf6XjUACgkQj4D7WH0S
/k5tlgf/dq4lAR0MvJi8XHv2uc8sLSMlMGajCezEiIF2aQ09lqloq68uDD6YzkJV
IlUCH353GKBNJQuFml15TodhIuAfBKKtUutW9pRgaC20HtE1PItKSk3ebYVL8m6l
ilLeDWA07jB3gkoDdewGnjSxIQ7jCBrcF+s0OTXibpAdBP+vbbDy/aGPM0E0Byk4
zfGg39l9g0mwJ5ayGR+ZAncxiJM1bfWWcKpZLvOWpA7VnT7Gve9ibYdONtq+2csk
b3ZURiwA/MTa3acbYfBxZKjwOJzphy4ZnrXtpAJpko5JjdLiRLWToe5uBDEldjV0
b1icgiI0kIv8f1JBQ02tHsx0UOh3Uw==
=V4W8
-----END PGP SIGNATURE-----
Merge tag 'pwm/for-6.15-rc2-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/ukleinek/linux
Pull pwm fixes from Uwe Kleine-König:
"A set of fixes for pwm core and various drivers
The first three patches handle clk_get_rate() returning 0 (which might
happen for example if the CCF is disabled). The first of these was
found because this triggered a warning with clang, the two others by
looking for similar issues in other drivers.
The remaining three fixes address issues in the new waveform pwm API.
Now that I worked on this a bit more, the finer details and corner
cases are better understood and the code is fixed accordingly"
* tag 'pwm/for-6.15-rc2-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/ukleinek/linux:
pwm: axi-pwmgen: Let .round_waveform_tohw() signal when request was rounded up
pwm: stm32: Search an appropriate duty_cycle if period cannot be modified
pwm: Let pwm_set_waveform() succeed even if lowlevel driver rounded up
pwm: fsl-ftm: Handle clk_get_rate() returning 0
pwm: rcar: Improve register calculation
pwm: mediatek: Prevent divide-by-zero in pwm_mediatek_config()
-----BEGIN PGP SIGNATURE-----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=LO/y
-----END PGP SIGNATURE-----
Merge tag 'v6.15-rc1-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6
Pull smb client fixes from Steve French:
- Fix multichannel decryption UAF
- Fix regression mounting to onedrive shares
- Fix missing mount option check for posix vs. noposix
- Fix version field in WSL symlinks
- Three minor cleanup to reparse point handling
- SMB1 fix for WSL special files
- SMB1 Kerberos fix
- Add SMB3 defines for two new FS attributes
* tag 'v6.15-rc1-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6:
smb3: Add defines for two new FileSystemAttributes
cifs: Fix querying of WSL CHR and BLK reparse points over SMB1
cifs: Split parse_reparse_point callback to functions: get buffer and parse buffer
cifs: Improve handling of name surrogate reparse points in reparse.c
cifs: Remove explicit handling of IO_REPARSE_TAG_MOUNT_POINT in inode.c
cifs: Fix encoding of SMB1 Session Setup Kerberos Request in non-UNICODE mode
smb: client: fix UAF in decryption with multichannel
cifs: Fix support for WSL-style symlinks
smb311 client: fix missing tcon check when mounting with linux/posix extensions
cifs: Ensure that all non-client-specific reparse points are processed by the server
-----BEGIN PGP SIGNATURE-----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=3hAp
-----END PGP SIGNATURE-----
Merge tag 'pci-v6.15-fixes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci
Pull pci fix from Bjorn Helgaas:
- Run quirk_huawei_pcie_sva() before arm_smmu_probe_device(), which
depends on the quirk, to avoid IOMMU initialization failures
(Zhangfei Gao)
* tag 'pci-v6.15-fixes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci:
PCI: Run quirk_huawei_pcie_sva() before arm_smmu_probe_device()
A bug was discovered that showed the accounting of the subops of the
ftrace_ops filtering was incorrect. Add a new test to better test the
filtering.
This test creates two instances, where it will add various filters to both
the set_ftrace_filter and the set_ftrace_notrace files and enable
function_graph. Then it looks into the enabled_functions file to make sure
that the filters are behaving correctly.
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Shuah Khan <skhan@linuxfoundation.org>
Cc: Andy Chiu <andybnac@gmail.com>
Link: https://lore.kernel.org/20250409152720.380778379@goodmis.org
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
The function graph infrastructure uses ftrace to hook to functions. It has
a single ftrace_ops to manage all the users of function graph. Each
individual user (tracing, bpf, fprobes, etc) has its own ftrace_ops to
track the functions it will have its callback called from. These
ftrace_ops are "subops" to the main ftrace_ops of the function graph
infrastructure.
Each ftrace_ops has a filter_hash and a notrace_hash that is defined as:
Only trace functions that are in the filter_hash but not in the
notrace_hash.
If the filter_hash is empty, it means to trace all functions.
If the notrace_hash is empty, it means do not disable any function.
The function graph main ftrace_ops needs to be a superset containing all
the functions to be traced by all the subops it has. The algorithm to
perform this merge was incorrect.
When the first subops was added to the main ops, it simply made the main
ops a copy of the subops (same filter_hash and notrace_hash).
When a second ops was added, it joined the new subops filter_hash with the
main ops filter_hash as a union of the two sets. The intersect between the
new subops notrace_hash and the main ops notrace_hash was created as the
new notrace_hash of the main ops.
The issue here is that it would then start tracing functions than no
subops were tracing. For example if you had two subops that had:
subops 1:
filter_hash = '*sched*' # trace all functions with "sched" in it
notrace_hash = '*time*' # except do not trace functions with "time"
subops 2:
filter_hash = '*lock*' # trace all functions with "lock" in it
notrace_hash = '*clock*' # except do not trace functions with "clock"
The intersect of '*time*' functions with '*clock*' functions could be the
empty set. That means the main ops will be tracing all functions with
'*time*' and all "*clock*" in it!
Instead, modify the algorithm to be a bit simpler and correct.
First, when adding a new subops, even if it's the first one, do not add
the notrace_hash if the filter_hash is not empty. Instead, just add the
functions that are in the filter_hash of the subops but not in the
notrace_hash of the subops into the main ops filter_hash. There's no
reason to add anything to the main ops notrace_hash.
The notrace_hash of the main ops should only be non empty iff all subops
filter_hashes are empty (meaning to trace all functions) and all subops
notrace_hashes include the same functions.
That is, the main ops notrace_hash is empty if any subops filter_hash is
non empty.
The main ops notrace_hash only has content in it if all subops
filter_hashes are empty, and the content are only functions that intersect
all the subops notrace_hashes. If any subops notrace_hash is empty, then
so is the main ops notrace_hash.
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Shuah Khan <skhan@linuxfoundation.org>
Cc: Andy Chiu <andybnac@gmail.com>
Link: https://lore.kernel.org/20250409152720.216356767@goodmis.org
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
The global notrace hash should be jointly decided by the intersection of
each subops's notrace hash, but not the filter hash.
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/20250408160258.48563-1-andybnac@gmail.com
Fixes: 5fccc7552c ("ftrace: Add subops logic to allow one ops to manage many")
Signed-off-by: Andy Chiu <andybnac@gmail.com>
[ fixed removing of freeing of filter_hash ]
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
quirk_huawei_pcie_sva() sets properties needed by arm_smmu_probe_device(),
but bcb81ac6ae ("iommu: Get DT/ACPI parsing into the proper probe path")
changed the iommu_probe_device() flow so arm_smmu_probe_device() is now
invoked before the quirk, leading to failures like this:
reg-dummy reg-dummy: late IOMMU probe at driver bind, something fishy here!
WARNING: CPU: 0 PID: 1 at drivers/iommu/iommu.c:449 __iommu_probe_device+0x140/0x570
RIP: 0010:__iommu_probe_device+0x140/0x570
The SR-IOV enumeration ordering changes like this:
pci_iov_add_virtfn
pci_device_add
pci_fixup_device(pci_fixup_header) <--
device_add
bus_notify
iommu_bus_notifier
+ iommu_probe_device
+ arm_smmu_probe_device
pci_bus_add_device
pci_fixup_device(pci_fixup_final) <--
device_attach
driver_probe_device
really_probe
pci_dma_configure
acpi_dma_configure_id
- iommu_probe_device
- arm_smmu_probe_device
The non-SR-IOV case is similar in that pci_device_add() is called from
pci_scan_single_device() in the generic enumeration path and
pci_bus_add_device() is called later, after all host bridges have been
enumerated.
Declare quirk_huawei_pcie_sva() as a header fixup to ensure that it happens
before arm_smmu_probe_device().
Fixes: bcb81ac6ae ("iommu: Get DT/ACPI parsing into the proper probe path")
Reported-by: Chaitanya Kumar Borah <chaitanya.kumar.borah@intel.com>
Closes: https://lore.kernel.org/all/SJ1PR11MB61295DE21A1184AEE0786E25B9D22@SJ1PR11MB6129.namprd11.prod.outlook.com/
Signed-off-by: Zhangfei Gao <zhangfei.gao@linaro.org>
[bhelgaas: commit log, add failure info and reporter]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Link: https://patch.msgid.link/20250317011352.5806-1-zhangfei.gao@linaro.org
A couple of cleanups for the error handling in the Freescale drivers.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmf5An8ACgkQJNaLcl1U
h9C6FggAhJvfqoFJ5jV4uXIwZm+m5vIGrqXN5zbHgO0SKa9ubT/BKKEMcejfCd0B
Vg8V5zFUsESfbAdOwjAVf6C0ypIDIIOeRXN0DzgLLBiMxC4bukySJGW/z2Db9T4f
kqaCQR3J8ZrW6qUq64qx+n3h7a/Cj8+AZ5wtDkSLhmDISYheleiQDRjyHHS9BNov
J0wWF8ay7VKSWvGhoGPiM7wMQmxvkUEoRMklBqRj/uMdKGFMFGWYDL7vBav/ybhW
ww4E2J5Oa3FfLDnf+F8w4WtZPBY2D7y9RKkrg9BdcSehaTaRI0kt794WwJM7/iEs
CtEEK+pALGIqKqJy+IyNSdyGZ6KAvw==
=TY6u
-----END PGP SIGNATURE-----
Merge tag 'spi-fix-v6.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi
Pull spi fixes from Mark Brown:
"A couple of cleanups for the error handling in the Freescale drivers"
* tag 'spi-fix-v6.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
spi: fsl-spi: Remove redundant probe error message
spi: fsl-qspi: Fix double cleanup in probe error path
- Fix missing error checks during controller probe in the sata_sx4
driver (Wentao)
- Fix missing error checks during controller probe in the pata_pxa driver
(Henry)
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQSRPv8tYSvhwAzJdzjdoc3SxdoYdgUCZ/ivjgAKCRDdoc3SxdoY
dguUAP9C1qGUOGlk+AJKrfJYy3ot25k1Kwf/C5rhG3WchsOkVAEAqNq9NIPUBfOa
xnMsGHIUjM09MDO9oY+oKQ0T98R3Zww=
=upB9
-----END PGP SIGNATURE-----
Merge tag 'ata-6.15-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/libata/linux
Pull ata fixes from Damien Le Moal:
- Fix missing error checks during controller probe in the sata_sx4
driver (Wentao)
- Fix missing error checks during controller probe in the pata_pxa
driver (Henry)
* tag 'ata-6.15-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/libata/linux:
ata: sata_sx4: Add error handling in pdc20621_i2c_read()
ata: pata_pxa: Fix potential NULL pointer dereference in pxa_ata_probe()
-----BEGIN PGP SIGNATURE-----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=jkBM
-----END PGP SIGNATURE-----
Merge tag 'block-6.15-20250411' of git://git.kernel.dk/linux
Pull more block fixes from Jens Axboe:
"Apparently my internal clock was off, or perhaps it was just wishful
thinking, but I sent out block fixes yesterday as my brain assumed it
was Friday. Subsequently, that missed the NVMe fixes that should go
into this weeks release as well. Hence, here's a followup with those,
and another simple fix.
- NVMe pull request via Christoph:
- nvmet fc/fcloop refcounting fixes (Daniel Wagner)
- fix missed namespace/ANA scans (Hannes Reinecke)
- fix a use after free in the new TCP netns support (Kuniyuki
Iwashima)
- fix a NULL instead of false review in multipath (Uday Shankar)
- Use strscpy() for null_blk disk name copy"
* tag 'block-6.15-20250411' of git://git.kernel.dk/linux:
null_blk: Use strscpy() instead of strscpy_pad() in null_add_dev()
nvmet-fc: put ref when assoc->del_work is already scheduled
nvmet-fc: take tgtport reference only once
nvmet-fc: update tgtport ref per assoc
nvmet-fc: inline nvmet_fc_free_hostport
nvmet-fc: inline nvmet_fc_delete_assoc
nvmet-fcloop: add ref counting to lport
nvmet-fcloop: replace kref with refcount
nvmet-fcloop: swap list_add_tail arguments
nvme-tcp: fix use-after-free of netns by kernel TCP socket.
nvme: multipath: fix return value of nvme_available_path
nvme: re-read ANA log page after ns scan completes
nvme: requeue namespace scan on missed AENs
Including:
- Fix two crashes, one in core code and a NULL-ptr dereference in the
Mediatek IOMMU driver.
- Dma_ops cleanup fix for core code.
- Two fixes for Intel VT-d driver:
- Fix posted MSI issue when users change cpu affinity.
- Remove invalid set_dma_ops() call in the iommu driver.
- Warning fix for Tegra IOMMU driver.
- Suspend/Resume fix for Exynos IOMMU driver.
- Probe failure fix for Renesas IOMMU driver
- Cosmetic fix
-----BEGIN PGP SIGNATURE-----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=oz0M
-----END PGP SIGNATURE-----
Merge tag 'iommu-fixes-v6.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/iommu/linux
Pull iommu fixes from Joerg Roedel:
- Fix two crashes, one in core code and a NULL-ptr dereference in the
Mediatek IOMMU driver
- Dma_ops cleanup fix for core code
- Two fixes for Intel VT-d driver:
- Fix posted MSI issue when users change cpu affinity
- Remove invalid set_dma_ops() call in the iommu driver
- Warning fix for Tegra IOMMU driver
- Suspend/Resume fix for Exynos IOMMU driver
- Probe failure fix for Renesas IOMMU driver
- Cosmetic fix
* tag 'iommu-fixes-v6.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/iommu/linux:
iommu/tegra241-cmdqv: Fix warnings due to dmam_free_coherent()
iommu: remove unneeded semicolon
iommu/mediatek: Fix NULL pointer deference in mtk_iommu_device_group
iommu/exynos: Fix suspend/resume with IDENTITY domain
iommu/ipmmu-vmsa: Register in a sensible order
iommu: Clear iommu-dma ops on cleanup
iommu/vt-d: Remove an unnecessary call set_dma_ops()
iommu/vt-d: Wire up irq_ack() to irq_move_irq() for posted MSIs
iommu: Fix crash in report_iommu_fault()
- Add suspend-to-idle EC wakeup quirks for Lenovo Go S (Mario
Limonciello).
- Prevent ACPI button from sending spurions KEY_POWER events to user
space in some cases after a recent update (Mario Limonciello).
- Compute the size of a structure instead of the size of a pointer
in two places in the PPTT parser code (Jean-Marc Eurin).
-----BEGIN PGP SIGNATURE-----
iQFGBAABCAAwFiEEcM8Aw/RY0dgsiRUR7l+9nS/U47UFAmf5IDESHHJqd0Byand5
c29ja2kubmV0AAoJEO5fvZ0v1OO18iAIAI7esmVtUp4iiW5PY3FPiVepsYyXuAcI
kyvy0Xw7WF+05bzdwojWDUAWay/DqUMqOgKZfoQnymXetosAXlkPkZBfWQkygJe7
8Jt38OgKlu4iDLTd+Nh2aDQm+5q5VkN2F6whkltlndjjxgCkaVEguJUyXXBuRwoH
o0uzt6GCk6w7t+RXnWexP4+hQ1Krfjq5OasgCaScABE0DkAEWDJVZecgod9Eq8ST
myJWaOzs1UbuYZeZk+p7fAS4IHacH/ArZxhl2gaPtSk54flZlopvV7rFWJGJO0eY
Q4pyg3zK2ZbIrtq+3wxOPIX1KMj22VV9XIBftV4sn1TleA28sfMoS40=
=SnIs
-----END PGP SIGNATURE-----
Merge tag 'acpi-6.15-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI fixes from Rafael Wysocki:
"These fix a recent regression in the ACPI button driver, add quirks
related to EC wakeups from suspend-to-idle and fix coding mistakes
related to the usage of sizeof() in the PPTT parser code:
Summary:
- Add suspend-to-idle EC wakeup quirks for Lenovo Go S (Mario
Limonciello)
- Prevent ACPI button from sending spurions KEY_POWER events to user
space in some cases after a recent update (Mario Limonciello)
- Compute the size of a structure instead of the size of a pointer in
two places in the PPTT parser code (Jean-Marc Eurin)"
* tag 'acpi-6.15-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
ACPI PPTT: Fix coding mistakes in a couple of sizeof() calls
ACPI: EC: Set ec_no_wakeup for Lenovo Go S
ACPI: button: Only send `KEY_POWER` for `ACPI_BUTTON_NOTIFY_STATUS`
- Add IBM z17 bits:
- Setup elf_platform for new machine types
- Allow to compile the kernel with z17 optimizations
- Add new performance counters
- Fix mismatch between indicator bits and queue indexes in virtio CCW code
- Fix double free in pmu setup error path
-----BEGIN PGP SIGNATURE-----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=HxI1
-----END PGP SIGNATURE-----
Merge tag 's390-6.15-3' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull s390 updates from Heiko Carstens:
"Note that besides two bug fixes this includes three commits for IBM
z17, which was announced this week.
- Add IBM z17 bits:
- Setup elf_platform for new machine types
- Allow to compile the kernel with z17 optimizations
- Add new performance counters
- Fix mismatch between indicator bits and queue indexes in virtio CCW code
- Fix double free in pmu setup error path"
* tag 's390-6.15-3' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
s390/cpumf: Fix double free on error in cpumf_pmu_event_init()
s390/cpumf: Update CPU Measurement facility extended counter set support
s390: Allow to compile with z17 optimizations
s390: Add z17 elf platform
s390/virtio_ccw: Don't allocate/assign airqs for non-existing queues
Merge updates of the ACPI EC and button drivers for 6.15-rc2:
- Add suspend-to-idle EC wakeup quirks for Lenovo Go S (Mario
Limonciello).
- Prevent ACPI button from sending spurions KEY_POWER events to user
space in some cases after a recent update (Mario Limonciello).
* acpi-ec:
ACPI: EC: Set ec_no_wakeup for Lenovo Go S
* acpi-button:
ACPI: button: Only send `KEY_POWER` for `ACPI_BUTTON_NOTIFY_STATUS`
blk_mq_alloc_disk() already zero-initializes the destination buffer,
making strscpy() sufficient for safely copying the disk's name. The
additional NUL-padding performed by strscpy_pad() is unnecessary.
If the destination buffer has a fixed length, strscpy() automatically
determines its size using sizeof() when the argument is omitted. This
makes the explicit size argument unnecessary.
The source string is also NUL-terminated and meets the __must_be_cstr()
requirement of strscpy().
No functional changes intended.
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Reviewed-by: Zhu Yanjun <yanjun.zhu@linux.dev>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Link: https://lore.kernel.org/r/20250410154727.883207-1-thorsten.blum@linux.dev
Signed-off-by: Jens Axboe <axboe@kernel.dk>
