Use the proper helper to kmap a bvec in brd_do_bvec instead of directly
accessing the bvec fields and use the deprecated kmap_atomic API.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Yu Kuai <yukuai3@huawei.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Link: https://lore.kernel.org/r/20250428141014.2360063-4-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The bvec iter iterates over the sector already, no need to duplicate the
work.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Yu Kuai <yukuai3@huawei.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Link: https://lore.kernel.org/r/20250428141014.2360063-3-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Pass the bvec to brd_do_bvec instead of marshalling the information into
individual arguments.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Yu Kuai <yukuai3@huawei.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Link: https://lore.kernel.org/r/20250428141014.2360063-2-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Merge 6.15 block fixes - both to get the fixes causing issues with
XFS testing, but also to make it easier for 6.16 ublk patches to avoid
conflicts.
* block-6.15:
ublk: fix race between io_uring_cmd_complete_in_task and ublk_cancel_cmd
ublk: call ublk_dispatch_req() for handling UBLK_U_IO_NEED_GET_DATA
block: don't autoload drivers on blk-cgroup configuration
block: don't autoload drivers on stat
block: remove the backing_inode variable in bdev_statx
block: move blkdev_{get,put} _no_open prototypes out of blkdev.h
block: never reduce ra_pages in blk_apply_bdi_limits
selftests: ublk: common: fix _get_disk_dev_t for pre-9.0 coreutils
selftests: ublk: remove useless 'delay_us' from 'struct dev_ctx'
selftests: ublk: fix recover test
block: hoist block size validation code to a separate function
block: fix race between set_blocksize and read paths
nvmet: fix out-of-bounds access in nvmet_enable_port
ublk_cancel_cmd() calls io_uring_cmd_done() to complete uring_cmd, but
we may have scheduled task work via io_uring_cmd_complete_in_task() for
dispatching request, then kernel crash can be triggered.
Fix it by not trying to canceling the command if ublk block request is
started.
Fixes: 216c8f5ef0 ("ublk: replace monitor with cancelable uring_cmd")
Reported-by: Jared Holzman <jholzman@nvidia.com>
Tested-by: Jared Holzman <jholzman@nvidia.com>
Closes: https://lore.kernel.org/linux-block/d2179120-171b-47ba-b664-23242981ef19@nvidia.com/
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20250425013742.1079549-3-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
We call io_uring_cmd_complete_in_task() to schedule task_work for handling
UBLK_U_IO_NEED_GET_DATA.
This way is really not necessary because the current context is exactly
the ublk queue context, so call ublk_dispatch_req() directly for handling
UBLK_U_IO_NEED_GET_DATA.
Fixes: 216c8f5ef0 ("ublk: replace monitor with cancelable uring_cmd")
Tested-by: Jared Holzman <jholzman@nvidia.com>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20250425013742.1079549-2-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Loading a driver just to configure blk-cgroup doesn't make sense, as that
assumes and already existing device.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Christian Brauner <brauner@kernel.org>
Acked-by: Tejun Heo <tj@kernel.org>
Link: https://lore.kernel.org/r/20250423053810.1683309-5-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
blkdev_get_no_open can trigger the legacy autoload of block drivers. A
simple stat of a block device has not historically done that, so disable
this behavior again.
Fixes: 9abcfbd235 ("block: Add atomic write support for statx")
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Christian Brauner <brauner@kernel.org>
Acked-by: Tejun Heo <tj@kernel.org>
Link: https://lore.kernel.org/r/20250423053810.1683309-4-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
backing_inode is only used once, so remove it and update the comment
describing the bdev lookup to be a bit more clear.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Christian Brauner <brauner@kernel.org>
Acked-by: Tejun Heo <tj@kernel.org>
Link: https://lore.kernel.org/r/20250423053810.1683309-3-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
These are only to be used by block internal code. Remove the comment
as we grew more users due to reworking block device node opening.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Christian Brauner <brauner@kernel.org>
Acked-by: Tejun Heo <tj@kernel.org>
Link: https://lore.kernel.org/r/20250423053810.1683309-2-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
When the user increased the read-ahead size through sysfs this value
currently get lost if the device is reprobe, including on a resume
from suspend.
As there is no hardware limitation for the read-ahead size there is
no real need to reset it or track a separate hardware limitation
like for max_sectors.
This restores the pre-atomic queue limit behavior in the sd driver as
sd did not use blk_queue_io_opt and thus never updated the read ahead
size to the value based of the optimal I/O, but changes behavior for
all other drivers. As the new behavior seems useful and sd is the
driver for which the readahead size tweaks are most useful that seems
like a worthwhile trade off.
Fixes: 804e498e04 ("sd: convert to the atomic queue limits API")
Reported-by: Holger Hoffstätte <holger@applied-asynchrony.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Tested-by: Holger Hoffstätte <holger@applied-asynchrony.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Link: https://lore.kernel.org/r/20250424082521.1967286-1-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Some distributions, such as centos stream 9, still have a version of
coreutils which does not yet support the %Hr and %Lr formats for stat(1)
[1, 2]. Running ublk selftests on these distributions results in the
following error in tests that use the _get_disk_dev_t helper:
line 23: ?r: syntax error: operand expected (error token is "?r")
To better accommodate older distributions, rewrite _get_disk_dev_t to
use the much older %t and %T formats for stat instead.
[1] https://github.com/coreutils/coreutils/blob/v9.0/NEWS#L114
[2] https://pkgs.org/download/coreutils
Signed-off-by: Uday Shankar <ushankar@purestorage.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20250423-ublk_selftests-v1-2-7d060e260e76@purestorage.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
'delay_us' shouldn't be added to 'struct dev_ctx' since now it is
handled by per-target command line & 'struct fault_inject_ctx'.
So remove it.
Fixes: 81586652bb ("selftests: ublk: add generic_06 for covering fault inject")
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Uday Shankar <ushankar@purestorage.com>
Link: https://lore.kernel.org/r/20250421235947.715272-3-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
When adding recovery test:
- 'break' is missed for handling '-g' argument
- test name of test_generic_05.sh is wrong
So fix the two.
Fixes: 57e13a2e8c ("selftests: ublk: support user recovery")
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Uday Shankar <ushankar@purestorage.com>
Link: https://lore.kernel.org/r/20250421235947.715272-2-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Hoist the block size validation code to bdev_validate_blocksize so that
we can call it from filesystems that don't care about the bdev pagecache
manipulations of set_blocksize.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Luis Chamberlain <mcgrof@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/174543795720.4139148.840349813093799165.stgit@frogsfrogsfrogs
Signed-off-by: Jens Axboe <axboe@kernel.dk>
With the new large sector size support, it's now the case that
set_blocksize can change i_blksize and the folio order in a manner that
conflicts with a concurrent reader and causes a kernel crash.
Specifically, let's say that udev-worker calls libblkid to detect the
labels on a block device. The read call can create an order-0 folio to
read the first 4096 bytes from the disk. But then udev is preempted.
Next, someone tries to mount an 8k-sectorsize filesystem from the same
block device. The filesystem calls set_blksize, which sets i_blksize to
8192 and the minimum folio order to 1.
Now udev resumes, still holding the order-0 folio it allocated. It then
tries to schedule a read bio and do_mpage_readahead tries to create
bufferheads for the folio. Unfortunately, blocks_per_folio == 0 because
the page size is 4096 but the blocksize is 8192 so no bufferheads are
attached and the bh walk never sets bdev. We then submit the bio with a
NULL block device and crash.
Therefore, truncate the page cache after flushing but before updating
i_blksize. However, that's not enough -- we also need to lock out file
IO and page faults during the update. Take both the i_rwsem and the
invalidate_lock in exclusive mode for invalidations, and in shared mode
for read/write operations.
I don't know if this is the correct fix, but xfs/259 found it.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Luis Chamberlain <mcgrof@kernel.org>
Tested-by: Shin'ichiro Kawasaki <shinichiro.kawasaki@wdc.com>
Link: https://lore.kernel.org/r/174543795699.4139148.2086129139322431423.stgit@frogsfrogsfrogs
Signed-off-by: Jens Axboe <axboe@kernel.dk>
ublk_init_queues() ensures that all nr_hw_queues queues are initialized,
with each ublk_queue's q_id set to its index. And ublk_init_queues() is
called before ublk_add_chdev(), which creates the cdev. Is is therefore
impossible for the !ubq || ub_cmd->q_id != ubq->q_id condition to hit in
__ublk_ch_uring_cmd(). Remove it to avoids some branches in the I/O path.
Signed-off-by: Caleb Sander Mateos <csander@purestorage.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Uday Shankar <ushankar@purestorage.com>
Link: https://lore.kernel.org/r/20250416170154.3621609-1-csander@purestorage.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
When trying to enable a port that has no transport configured yet,
nvmet_enable_port() uses NVMF_TRTYPE_MAX (255) to query the transports
array, causing an out-of-bounds access:
[ 106.058694] BUG: KASAN: global-out-of-bounds in nvmet_enable_port+0x42/0x1da
[ 106.058719] Read of size 8 at addr ffffffff89dafa58 by task ln/632
[...]
[ 106.076026] nvmet: transport type 255 not supported
Since commit 200adac758, NVMF_TRTYPE_MAX is the default state as configured by
nvmet_ports_make().
Avoid this by checking for NVMF_TRTYPE_MAX before proceeding.
Fixes: 200adac758 ("nvme: Add PCI transport type")
Signed-off-by: Richard Weinberger <richard@nod.at>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Currently ublk only allows the size of the ublkb block device to be
set via UBLK_CMD_SET_PARAMS before UBLK_CMD_START_DEV is triggered.
This does not provide support for extendable user-space block devices
without having to stop and restart the underlying ublkb block device
causing IO interruption.
This patch adds a new ublk command UBLK_U_CMD_UPDATE_SIZE to allow the
ublk block device to be resized on-the-fly.
Feature flag UBLK_F_UPDATE_SIZE is also added to indicate support.
Signed-off-by: Omri Mann <omri@nvidia.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/2a370ab1-d85b-409d-b762-f9f3f6bdf705@nvidia.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Even if blk-rq-qos isn't used or configured, dipping into the queue to
fetch ->rq_qos is a noticeable slowdown and visible in profiles. Add an
unlikely static key around blk-rq-qos, to avoid fetching this cacheline
if blk-iolatency or blk-wbt isn't configured or used.
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
On x86, rep stos will be emitted to clear the the blk_mq_alloc_data
struct, as not all members are being explicitly initialied. Depending on
the type of CPU, this is a noticeable slowdown compared to just ensuring
that the struct is fully initialized when setup.
For the 4 spots that setup a struct blk_mq_alloc_data on the stack,
ensure all members are being initialized.
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The 'nr_budgets' argument of blk_mq_dispatch_rq_list() is either the
number of elements in the 'list' argument or zero. Instead of passing
the number of list elements to blk_mq_dispatch_rq_list(), pass a boolean
argument that indicates whether or not blk_mq_dispatch_rq_list() should
request the block driver for a budget for each request in 'list'.
Remove the code for counting list elements from blk_mq_dispatch_rq_list()
callers where possible. Remove the code that decrements nr_budgets from
blk_mq_dispatch_rq_list() because it is superfluous. Each request that
is processed by blk_mq_dispatch_rq_list() is in one of these two states
if 'get_budget' is false:
* Either the request is on 'list' and the budget for the request has to
be released from the error path.
* Or the request is not on 'list' and q->mq_ops->queue_rq() has already
released the budget (ret != BLK_STS_OK) or q->mq_ops->queue_rq() will
release the budget asynchronously (ret == BLK_STS_OK).
Cc: Christoph Hellwig <hch@lst.de>
Cc: Ming Lei <ming.lei@redhat.com>
Cc: John Garry <john.g.garry@oracle.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20250415205134.3650042-1-bvanassche@acm.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
I had left the warning around but as a non-fatal error to get my gcc-15
builds going, but fixed up some of the most annoying warning cases so
that it wouldn't be *too* verbose.
Because I like the _concept_ of the warning, even if I detested the
implementation to shut it up.
It turns out the implementation to shut it up is even more broken than I
thought, and my "shut up most of the warnings" patch just caused fatal
errors on gcc-14 instead.
I had tested with clang, but when I upgrade my development environment,
I try to do it on all machines because I hate having different systems
to maintain, and hadn't realized that gcc-14 now had issues.
The ACPI case is literally why I wanted to have a *type* that doesn't
trigger the warning (see commit d5d45a7f2619: "gcc-15: make
'unterminated string initialization' just a warning"), instead of
marking individual places as "__nonstring".
But gcc-14 doesn't like that __nonstring location that shut gcc-15 up,
because it's on an array of char arrays, not on one single array:
drivers/acpi/tables.c:399:1: error: 'nonstring' attribute ignored on objects of type 'const char[][4]' [-Werror=attributes]
399 | static const char table_sigs[][ACPI_NAMESEG_SIZE] __initconst __nonstring = {
| ^~~~~~
and my attempts to nest it properly with a type had failed, because of
how gcc doesn't like marking the types as having attributes, only
symbols.
There may be some trick to it, but I was already annoyed by the bad
attribute design, now I'm just entirely fed up with it.
I wish gcc had a proper way to say "this type is a *byte* array, not a
string".
The obvious thing would be to distinguish between "char []" and an
explicitly signed "unsigned char []" (as opposed to an implicitly
unsigned char, which is typically an architecture-specific default, but
for the kernel is universal thanks to '-funsigned-char').
But any "we can typedef a 8-bit type to not become a string just because
it's an array" model would be fine.
But "__attribute__((nonstring))" is sadly not that sane model.
Reported-by: Chris Clayton <chris2553@googlemail.com>
Fixes: 4b4bd8c50f ("gcc-15: acpi: sprinkle random '__nonstring' crumbles around")
Fixes: d5d45a7f26 ("gcc-15: make 'unterminated string initialization' just a warning")
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The C sequence points are complicated things, and gcc-15 has apparently
added a warning for the case where an object is both used and modified
multiple times within the same sequence point.
That's a great warning.
Or rather, it would be a great warning, except gcc-15 seems to not
really be very exact about it, and doesn't notice that the modification
are to two entirely different members of the same object: the array
counter and the array entries.
So that seems kind of silly.
That said, the code that gcc complains about is unnecessarily
complicated, so moving the array counter update into a separate
statement seems like the most straightforward fix for these warnings:
drivers/net/wireless/intel/iwlwifi/mld/d3.c: In function ‘iwl_mld_set_netdetect_info’:
drivers/net/wireless/intel/iwlwifi/mld/d3.c:1102:66: error: operation on ‘netdetect_info->n_matches’ may be undefined [-Werror=sequence-point]
1102 | netdetect_info->matches[netdetect_info->n_matches++] = match;
| ~~~~~~~~~~~~~~~~~~~~~~~~~^~
drivers/net/wireless/intel/iwlwifi/mld/d3.c:1120:58: error: operation on ‘match->n_channels’ may be undefined [-Werror=sequence-point]
1120 | match->channels[match->n_channels++] =
| ~~~~~~~~~~~~~~~~~^~
side note: the code at that second warning is actively buggy, and only
works on little-endian machines that don't do strict alignment checks.
The code casts an array of integers into an array of unsigned long in
order to use our bitmap iterators. That happens to work fine on any
sane architecture, but it's still wrong.
This does *not* fix that more serious problem. This only splits the two
assignments into two statements and fixes the compiler warning. I need
to get rid of the new warnings in order to be able to actually do any
build testing.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
All of these cases are perfectly valid and good traditional C, but hit
by the "you're not NUL-terminating your byte array" warning.
And none of the cases want any terminating NUL character.
Mark them __nonstring to shut up gcc-15 (and in the case of the ak8974
magnetometer driver, I just removed the explicit array size and let gcc
expand the 3-byte and 6-byte arrays by one extra byte, because it was
the simpler change).
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This removes two cases of explicit NUL padding that now causes warnings
because of '-Wunterminated-string-initialization' being part of -Wextra
in gcc-15.
Gcc is being silly in this case when it says that it truncates a NUL
terminator, because in these cases there were _multiple_ NUL characters.
But we can get rid of the warning by just simplifying the two
initializers that trigger the warning for me, so this does exactly that.
I'm not sure why the power supply code did that odd
.attr_name = #_name "\0",
pattern: it was introduced in commit 2cabeaf151 ("power: supply: core:
Cleanup power supply sysfs attribute list"), but that 'attr_name[]'
field is an explicitly sized character array in a statically initialized
variable, and a string initializer always has a terminating NUL _and_
statically initialized character arrays are zero-padded anyway, so it
really seems to be rather extraneous belt-and-suspenders.
The zero_uuid[16] initialization in drivers/md/bcache/super.c makes
perfect sense, but it isn't necessary for the same reasons, and not
worth the new gcc warning noise.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This is not great: I'd much rather introduce a typedef that is a "ACPI
name byte buffer", and use that to mark these special 4-byte ACPI names
that do not use NUL termination.
But as noted in the previous commit ("gcc-15: make 'unterminated string
initialization' just a warning") gcc doesn't actually seem to support
that notion, so instead you have to just mark every single array
declaration individually.
So this is not pretty, but this gets rid of the bulk of the annoying
warnings during an allmodconfig build for me.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
gcc-15 enabling -Wunterminated-string-initialization in -Wextra by
default was done with the best intentions, but the warning is still
quite broken.
What annoys me about the warning is that this is a very traditional AND
CORRECT way to initialize fixed byte arrays in C:
unsigned char hex[16] = "0123456789abcdef";
and we use this all over the kernel. And the warning is fine, but gcc
developers apparently never made a reasonable way to disable it. As is
(sadly) tradition with these things.
Yes, there's "__attribute__((nonstring))", and we have a macro to make
that absolutely disgusting syntax more palatable (ie the kernel syntax
for that monstrosity is just "__nonstring").
But that attribute is misdesigned. What you'd typically want to do is
tell the compiler that you are using a type that isn't a string but a
byte array, but that doesn't work at all:
warning: ‘nonstring’ attribute does not apply to types [-Wattributes]
and because of this fundamental mis-design, you then have to mark each
instance of that pattern.
This is particularly noticeable in our ACPI code, because ACPI has this
notion of a 4-byte "type name" that gets used all over, and is exactly
this kind of byte array.
This is a sad oversight, because the warning is useful, but really would
be so much better if gcc had also given a sane way to indicate that we
really just want a byte array type at a type level, not the broken "each
and every array definition" level.
So now instead of creating a nice "ACPI name" type using something like
typedef char acpi_name_t[4] __nonstring;
we have to do things like
char name[ACPI_NAMESEG_SIZE] __nonstring;
in every place that uses this concept and then happens to have the
typical initializers.
This is annoying me mainly because I think the warning _is_ a good
warning, which is why I'm not just turning it off in disgust. But it is
hampered by this bad implementation detail.
[ And obviously I'm doing this now because system upgrades for me are
something that happen in the middle of the release cycle: don't do it
before or during travel, or just before or during the busy merge
window period. ]
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
or aren't considered necessary for -stable kernels.
All patches are basically for MM although five are alterations to
MAINTAINERS.
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCaAR3JgAKCRDdBJ7gKXxA
jtmLAP9d1h4Y7BnjJ876oPm8s3GQoasiAP6AJw3hbK7rX880vwD8DqU1IM3bTBDu
Z9ro41MvytxWKRMEaaYUMcrh04l1IQk=
=Fcx+
-----END PGP SIGNATURE-----
Merge tag 'mm-hotfixes-stable-2025-04-19-21-24' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull misc hotfixes from Andrew Morton:
"16 hotfixes. 2 are cc:stable and the remainder address post-6.14
issues or aren't considered necessary for -stable kernels.
All patches are basically for MM although five are alterations to
MAINTAINERS"
[ Basic counting skills are clearly not a strictly necessary requirement
for kernel maintainers. - Linus ]
* tag 'mm-hotfixes-stable-2025-04-19-21-24' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
MAINTAINERS: add section for locking of mm's and VMAs
mm: vmscan: fix kswapd exit condition in defrag_mode
mm: vmscan: restore high-cpu watermark safety in kswapd
MAINTAINERS: add Pedro as reviewer to the MEMORY MAPPING section
mm/memory: move sanity checks in do_wp_page() after mapcount vs. refcount stabilization
mm, hugetlb: increment the number of pages to be reset on HVO
writeback: fix false warning in inode_to_wb()
docs: ABI: replace mcroce@microsoft.com with new Meta address
mm/gup: fix wrongly calculated returned value in fault_in_safe_writeable()
MAINTAINERS: add memory advice section
MAINTAINERS: add mmap trace events to MEMORY MAPPING
mm: memcontrol: fix swap counter leak from offline cgroup
MAINTAINERS: add MM subsection for the page allocator
MAINTAINERS: update SLAB ALLOCATOR maintainers
fs/dax: fix folio splitting issue by resetting old folio order + _nr_pages
mm/page_alloc: fix deadlock on cpu_hotplug_lock in __accept_page()
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRAhzRXHqcMeLMyaSiRxhvAZXjcogUCaAQM5QAKCRCRxhvAZXjc
olcwAP0RETZn15Jkt5+mKjcx99fuVE7je3lp56UH4Y4XjZmthgEA1n65RDr4Tq6E
548A2/9Hnt4NWdvoi9VhrG4+5dNRowM=
=cFFa
-----END PGP SIGNATURE-----
Merge tag 'vfs-6.15-rc3.fixes.2' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull vfs fixes from Christian Brauner:
- Revert the hfs{plus} deprecation warning that's also included in this
pull request. The commit introducing the deprecation warning resides
rather early in this branch. So simply dropping it would've rebased
all other commits which I decided to avoid. Hence the revert in the
same branch
[ Background - the deprecation warning discussion resulted in people
stepping up, and so hfs{plus} will have a maintainer taking care of
it after all.. - Linus ]
- Switch CONFIG_SYSFS_SYCALL default to n and decouple from
CONFIG_EXPERT
- Fix an audit bug caused by changes to our kernel path lookup helpers
this cycle. Audit needs the parent path even if the dentry it tried
to look up is negative
- Ensure that the kernel path lookup helpers leave the passed in path
argument clean when they return an error. This is consistent with all
our other helpers
- Ensure that vfs_getattr_nosec() calls bdev_statx() so the relevant
information is available to kernel consumers as well
- Don't set a timer and call schedule() if the timer will expire
immediately in epoll
- Make netfs lookup tables with __nonstring
* tag 'vfs-6.15-rc3.fixes.2' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
Revert "hfs{plus}: add deprecation warning"
fs: move the bdex_statx call to vfs_getattr_nosec
netfs: Mark __nonstring lookup tables
eventpoll: Set epoll timeout if it's in the future
fs: ensure that *path_locked*() helpers leave passed path pristine
fs: add kern_path_locked_negative()
hfs{plus}: add deprecation warning
Kconfig: switch CONFIG_SYSFS_SYCALL default to n
This reverts commit ddee68c499.
There's ongoing discussion about better maintenance of at least hfsplus.
Rever the deprecation warning for now.
Signed-off-by: Christian Brauner <brauner@kernel.org>
- Initialize hash variables in ftrace subops logic
The fix that simplified the ftrace subops logic opened a path where some
variables could be used without being initialized, and done subtly where
the compiler did not catch it. Initialize those variables to the
EMPTY_HASH, which is the default hash.
- Reinitialize the hash pointers after they are freed
Some of the hash pointers in the subop logic were freed but may still be
referenced later. To prevent use-after-free bugs, initialize them back to
the EMPTY_HASH.
- Free the ftrace hashes when they are replaced
The fix that simplified the subops logic updated some hash pointers, but
left the original hash that they were pointing to where they are no longer
used. This caused a memory leak. Free the hashes that are pointed to by
the pointers when they are replaced.
- Fix size initialization of ftrace direct function hash
The ftrace direct function hash used by BPF initialized the hash size
incorrectly. It checked the size of items to a hard coded 32, which made
the hash bit size of 5. The hash size is supposed to be limited by the bit
size of the hash, as the bitmask is allowed to be greater than 5. Rework
the size check to first pass the number of elements to fls() and then
compare that to FTRACE_HASH_MAX_BITS before allocating the hash.
- Fix format output of ftrace_graph_ent_entry event
The field depth of the ftrace_graph_ent_entry event is of size 4 but the
output showed it as unsigned long and use "%lu". Change it to unsigned int
and use "%u" in the print format that is displayed to user space.
- Fix the trace event filter on strings
Events can be filtered on numbers or string values. The return value
checked from strncpy_from_kernel_nofault() and strncpy_from_user_nofault()
was used to determine if reading the strings would fault or not. It would
return fault if the value was non zero, which is basically meant that it
was always considering the read as a fault.
- Add selftest to test trace event string filtering
In order to catch the breakage of the string filtering, add a self test to
make sure that it continues to work.
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCaAPqNRQccm9zdGVkdEBn
b29kbWlzLm9yZwAKCRAp5XQQmuv6qv5nAP4mqIgne7tzMhHIH/nQGM/7Dj98n+Vt
BXm6VifVdVJvtAD+KCDipZ2MspGEeZX3SDSnvBuj0S+OX9T9CTWPv+rFUwE=
=AWY4
-----END PGP SIGNATURE-----
Merge tag 'trace-v6.15-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull tracing fixes from Steven Rostedt:
- Initialize hash variables in ftrace subops logic
The fix that simplified the ftrace subops logic opened a path where
some variables could be used without being initialized, and done
subtly where the compiler did not catch it. Initialize those
variables to the EMPTY_HASH, which is the default hash.
- Reinitialize the hash pointers after they are freed
Some of the hash pointers in the subop logic were freed but may still
be referenced later. To prevent use-after-free bugs, initialize them
back to the EMPTY_HASH.
- Free the ftrace hashes when they are replaced
The fix that simplified the subops logic updated some hash pointers,
but left the original hash that they were pointing to where they are
no longer used. This caused a memory leak. Free the hashes that are
pointed to by the pointers when they are replaced.
- Fix size initialization of ftrace direct function hash
The ftrace direct function hash used by BPF initialized the hash size
incorrectly. It checked the size of items to a hard coded 32, which
made the hash bit size of 5. The hash size is supposed to be limited
by the bit size of the hash, as the bitmask is allowed to be greater
than 5. Rework the size check to first pass the number of elements to
fls() and then compare that to FTRACE_HASH_MAX_BITS before allocating
the hash.
- Fix format output of ftrace_graph_ent_entry event
The field depth of the ftrace_graph_ent_entry event is of size 4 but
the output showed it as unsigned long and use "%lu". Change it to
unsigned int and use "%u" in the print format that is displayed to
user space.
- Fix the trace event filter on strings
Events can be filtered on numbers or string values. The return value
checked from strncpy_from_kernel_nofault() and
strncpy_from_user_nofault() was used to determine if reading the
strings would fault or not. It would return fault if the value was
non zero, which is basically meant that it was always considering the
read as a fault.
- Add selftest to test trace event string filtering
In order to catch the breakage of the string filtering, add a self
test to make sure that it continues to work.
* tag 'trace-v6.15-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
tracing: selftests: Add testing a user string to filters
tracing: Fix filter string testing
ftrace: Fix type of ftrace_graph_ent_entry.depth
ftrace: fix incorrect hash size in register_ftrace_direct()
ftrace: Free ftrace hashes after they are replaced in the subops code
ftrace: Reinitialize hash to EMPTY_HASH after freeing
ftrace: Initialize variables for ftrace_startup/shutdown_subops()
- v6.15 libcrc clean-up makes invalid configurations possible
- Fix a potential deadlock introduced during the v6.15 merge window
-----BEGIN PGP SIGNATURE-----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=vCFi
-----END PGP SIGNATURE-----
Merge tag 'nfsd-6.15-1' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux
Pull nfsd fixes from Chuck Lever:
- v6.15 libcrc clean-up makes invalid configurations possible
- Fix a potential deadlock introduced during the v6.15 merge window
* tag 'nfsd-6.15-1' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux:
nfsd: decrease sc_count directly if fail to queue dl_recall
nfs: add missing selections of CONFIG_CRC32
Toolchain and infrastructure:
- Fix missing KASAN LLVM flags on first build (and fix spurious
rebuilds) by skipping '--target'.
- Fix Make < 4.3 build error by using '$(pound)'.
- Fix UML build error by removing 'volatile' qualifier from io helpers.
- Fix UML build error by adding 'dma_{alloc,free}_attrs()' helpers.
- Clean gendwarfksyms warnings by avoiding to export '__pfx' symbols.
- Clean objtool warning by adding a new 'noreturn' function for 1.86.0.
- Disable 'needless_continue' Clippy lint due to new 1.86.0 warnings.
- Add missing 'ffi' crate to 'generate_rust_analyzer.py'.
'pin-init' crate:
- Import a couple fixes from upstream.
-----BEGIN PGP SIGNATURE-----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=fm2H
-----END PGP SIGNATURE-----
Merge tag 'rust-fixes-6.15' of git://git.kernel.org/pub/scm/linux/kernel/git/ojeda/linux
Pull rust fixes from Miguel Ojeda:
"Toolchain and infrastructure:
- Fix missing KASAN LLVM flags on first build (and fix spurious
rebuilds) by skipping '--target'
- Fix Make < 4.3 build error by using '$(pound)'
- Fix UML build error by removing 'volatile' qualifier from io
helpers
- Fix UML build error by adding 'dma_{alloc,free}_attrs()' helpers
- Clean gendwarfksyms warnings by avoiding to export '__pfx' symbols
- Clean objtool warning by adding a new 'noreturn' function for
1.86.0
- Disable 'needless_continue' Clippy lint due to new 1.86.0 warnings
- Add missing 'ffi' crate to 'generate_rust_analyzer.py'
'pin-init' crate:
- Import a couple fixes from upstream"
* tag 'rust-fixes-6.15' of git://git.kernel.org/pub/scm/linux/kernel/git/ojeda/linux:
rust: helpers: Add dma_alloc_attrs() and dma_free_attrs()
rust: helpers: Remove volatile qualifier from io helpers
rust: kbuild: use `pound` to support GNU Make < 4.3
objtool/rust: add one more `noreturn` Rust function for Rust 1.86.0
rust: kasan/kbuild: fix missing flags on first build
rust: disable `clippy::needless_continue`
rust: kbuild: Don't export __pfx symbols
rust: pin-init: use Markdown autolinks in Rust comments
rust: pin-init: alloc: restrict `impl ZeroableOption` for `Box` to `T: Sized`
scripts: generate_rust_analyzer: Add ffi crate
dma-buf:
- Correctly decrement refcounter on errors
gem:
- Fix test for imported buffers
amdgpu:
- Cleaner shader sysfs fix
- Suspend fix
- Fix doorbell free ordering
- Video caps fix
- DML2 memory allocation optimization
- HDP fix
i915:
- Fix DP DSC configurations that require 3 DSC engines per pipe
xe:
- Fix LRC address being written too late for GuC
- Fix notifier vs folio deadlock
- Fix race betwen dma_buf unmap and vram eviction
- Fix debugfs handling PXP terminations unconditionally
msm:
- Display:
- Fix to call dpu_plane_atomic_check_pipe() for both SSPPs in
case of multi-rect
- Fix to validate plane_state pointer before using it in
dpu_plane_virtual_atomic_check()
- Fix to make sure dereferencing dpu_encoder_phys happens after
making sure it is valid in _dpu_encoder_trigger_start()
- Remove the remaining intr_tear_rd_ptr which we initialized
to -1 because NO_IRQ indices start from 0 now
- GPU:
- Fix IB_SIZE overflow
ivpu:
- Fix debugging
- Fixes to frequency
- Support firmware API 3.28.3
- Flush jobs upon reset
mgag200:
- Set vblank start to correct values
v3d:
- Fix Indirect Dispatch
-----BEGIN PGP SIGNATURE-----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=vfk0
-----END PGP SIGNATURE-----
Merge tag 'drm-fixes-2025-04-19' of https://gitlab.freedesktop.org/drm/kernel
Pull drm fixes from Dave Airlie:
"Easter rc3 pull request, fixes in all the usuals, amdgpu, xe, msm,
with some i915/ivpu/mgag200/v3d fixes, then a couple of bits in
dma-buf/gem.
Hopefully has no easter eggs in it.
dma-buf:
- Correctly decrement refcounter on errors
gem:
- Fix test for imported buffers
amdgpu:
- Cleaner shader sysfs fix
- Suspend fix
- Fix doorbell free ordering
- Video caps fix
- DML2 memory allocation optimization
- HDP fix
i915:
- Fix DP DSC configurations that require 3 DSC engines per pipe
xe:
- Fix LRC address being written too late for GuC
- Fix notifier vs folio deadlock
- Fix race betwen dma_buf unmap and vram eviction
- Fix debugfs handling PXP terminations unconditionally
msm:
- Display:
- Fix to call dpu_plane_atomic_check_pipe() for both SSPPs in
case of multi-rect
- Fix to validate plane_state pointer before using it in
dpu_plane_virtual_atomic_check()
- Fix to make sure dereferencing dpu_encoder_phys happens after
making sure it is valid in _dpu_encoder_trigger_start()
- Remove the remaining intr_tear_rd_ptr which we initialized to
-1 because NO_IRQ indices start from 0 now
- GPU:
- Fix IB_SIZE overflow
ivpu:
- Fix debugging
- Fixes to frequency
- Support firmware API 3.28.3
- Flush jobs upon reset
mgag200:
- Set vblank start to correct values
v3d:
- Fix Indirect Dispatch"
* tag 'drm-fixes-2025-04-19' of https://gitlab.freedesktop.org/drm/kernel: (26 commits)
drm/msm/a6xx+: Don't let IB_SIZE overflow
drm/xe/pxp: do not queue unneeded terminations from debugfs
drm/xe/dma_buf: stop relying on placement in unmap
drm/xe/userptr: fix notifier vs folio deadlock
drm/xe: Set LRC addresses before guc load
drm/mgag200: Fix value in <VBLKSTR> register
drm/gem: Internally test import_attach for imported objects
drm/amdgpu: Use the right function for hdp flush
drm/amd/display/dml2: use vzalloc rather than kzalloc
drm/amdgpu: Add back JPEG to video caps for carrizo and newer
drm/amdgpu: fix warning of drm_mm_clean
drm/amd: Forbid suspending into non-default suspend states
drm/amdgpu: use a dummy owner for sysfs triggered cleaner shaders v4
drm/i915/dp: Check for HAS_DSC_3ENGINES while configuring DSC slices
drm/i915/display: Add macro for checking 3 DSC engines
dma-buf/sw_sync: Decrement refcount on error in sw_sync_ioctl_get_deadline()
accel/ivpu: Add cmdq_id to job related logs
accel/ivpu: Show NPU frequency in sysfs
accel/ivpu: Fix the NPU's DPU frequency calculation
accel/ivpu: Update FW Boot API to version 3.28.3
...
Fixes for v6.15-rc3
Display:
- Fix to call dpu_plane_atomic_check_pipe() for both SSPPs in
case of multi-rect
- Fix to validate plane_state pointer before using it in
dpu_plane_virtual_atomic_check()
- Fix to make sure dereferencing dpu_encoder_phys happens after
making sure it is valid in _dpu_encoder_trigger_start()
- Remove the remaining intr_tear_rd_ptr which we initialized
to -1 because NO_IRQ indices start from 0 now
GPU:
- Fix IB_SIZE overflow
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Rob Clark <robdclark@gmail.com>
Link: https://lore.kernel.org/r/CAF6AEGtVKXEVdzUzFWmQE8JmK3nx_hp+ynOd-5j3vnfcU-sgOA@mail.gmail.com
-----BEGIN PGP SIGNATURE-----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=92E5
-----END PGP SIGNATURE-----
Merge tag '6.15-rc2-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6
Pull smb client fixes from Steve French:
- Fix hard link lease key problem when close is deferred
- Revert the socket lockdep/refcount workarounds done in cifs.ko now
that it is fixed at the socket layer
* tag '6.15-rc2-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6:
Revert "smb: client: fix TCP timers deadlock after rmmod"
Revert "smb: client: Fix netns refcount imbalance causing leaks and use-after-free"
smb3 client: fix open hardlink on deferred close file error
IB_SIZE is only b0..b19. Starting with a6xx gen3, additional fields
were added above the IB_SIZE. Accidentially setting them can cause
badness. Fix this by properly defining the CP_INDIRECT_BUFFER packet
and using the generated builder macro to ensure unintended bits are not
set.
v2: add missing type attribute for IB_BASE
v3: fix offset attribute in xml
Reported-by: Connor Abbott <cwabbott0@gmail.com>
Fixes: a83366ef19 ("drm/msm/a6xx: add A640/A650 to gpulist")
Signed-off-by: Rob Clark <robdclark@chromium.org>
Patchwork: https://patchwork.freedesktop.org/patch/643396/
- Fix hypercall detection on Xen guests
- Extend the AMD microcode loader SHA check to Zen5,
to block loading of any unreleased standalone
Zen5 microcode patches
- Add new Intel CPU model number for Bartlett Lake
- Fix the workaround for AMD erratum 1054
- Fix buggy early memory acceptance between
SEV-SNP guests and the EFI stub
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=cqkj
-----END PGP SIGNATURE-----
Merge tag 'x86-urgent-2025-04-18' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull misc x86 fixes from Ingo Molnar:
- Fix hypercall detection on Xen guests
- Extend the AMD microcode loader SHA check to Zen5, to block loading
of any unreleased standalone Zen5 microcode patches
- Add new Intel CPU model number for Bartlett Lake
- Fix the workaround for AMD erratum 1054
- Fix buggy early memory acceptance between SEV-SNP guests and the EFI
stub
* tag 'x86-urgent-2025-04-18' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/boot/sev: Avoid shared GHCB page for early memory acceptance
x86/cpu/amd: Fix workaround for erratum 1054
x86/cpu: Add CPU model number for Bartlett Lake CPUs with Raptor Cove cores
x86/microcode/AMD: Extend the SHA check to Zen5, block loading of any unreleased standalone Zen5 microcode patches
x86/xen: Fix __xen_hypercall_setfunc()
- Fix Intel uncore PMU IIO free running counters on
SPR, ICX and SNR systems.
- Fix Intel PEBS buffer overflow handling
- Fix skid in Intel PEBS sampling of user-space
general purpose registers
- Enable Panther Lake PMU support - similar to Lunar Lake.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----
iQJFBAABCgAvFiEEBpT5eoXrXCwVQwEKEnMQ0APhK1gFAmgCtpgRHG1pbmdvQGtl
cm5lbC5vcmcACgkQEnMQ0APhK1iKJxAAp+Sigxdj7jrq6a8txDsoPeCcb+tyqhxl
j/hJ8JeTuQM+y09AwJDYGzRc0tatGMNUKqpR5YQbHLDJAFNQpQZRRXd0VzVyVOgy
29zMTtG+zfWAncqddy0v2QWCsMdJxW3coDj1ahbQjrFIfa1Qdus3hTodXlSJ2+/c
dBqXNjz3sckdT1LLPC2+Ahc2dCTotvqsJV2kkY6njbIOnhqncPyVMCi8EaBxbrKO
s4iSfYBS3IUX8px9Yqr/f4CkVMFJHG/jNI8TXnZEzyg/geAEY34K84T09qvq9hOl
BB/oO0N0C81tARW9oehc7p5nhJe/59W7lvylMcdBDMPm2B1iHLIRLJw2aqo4VP0G
apQPsEPGMBfnIdF7jVNBQztqUMJoCH33Mz94D3mr4VsXNdCvP0891kvNm0ftqlgV
2puWchBiHo5cdXP45o+CYJLrufzBm+v0hZF1YlfQxEiksBJlpKcpC2+4gZKqzHDO
R4j3w7FBlEikySJnTwl7n+BZNSRUwXUuOYBekO2fhlmwPAtvK0pbnijjLb5jajQn
xPh1UKwYl2MC0qzIGkBfnAG3yWnU2XeChnBGj9NXuzdky2qA9Oqyeix0yTEugvmW
yj53nqFmP7vFYtBlDrondl3EaJlAsPRVvQGgB+zfgsro7G/NIud/j+VzcNBKwYMy
VxbRLrejvHU=
=rUbq
-----END PGP SIGNATURE-----
Merge tag 'perf-urgent-2025-04-18' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 perf event fixes from Ingo Molnar:
"Miscellaneous fixes and a hardware-enabling change:
- Fix Intel uncore PMU IIO free running counters on SPR, ICX and SNR
systems
- Fix Intel PEBS buffer overflow handling
- Fix skid in Intel PEBS sampling of user-space general purpose
registers
- Enable Panther Lake PMU support - similar to Lunar Lake"
* tag 'perf-urgent-2025-04-18' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf/x86/intel: Add Panther Lake support
perf/x86/intel: Allow to update user space GPRs from PEBS records
perf/x86/intel: Don't clear perf metrics overflow bit unconditionally
perf/x86/intel/uncore: Fix the scale of IIO free running counters on SPR
perf/x86/intel/uncore: Fix the scale of IIO free running counters on ICX
perf/x86/intel/uncore: Fix the scale of IIO free running counters on SNR
code, and update the .clang-format file to not include obsolete
function names.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=Tz8h
-----END PGP SIGNATURE-----
Merge tag 'core-urgent-2025-04-18' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull misc core fixes from Ingo Molnar:
"Fix a genksyms related bug, triggered by recent changes to the percpu
code, and update the .clang-format file to not include obsolete
function names"
* tag 'core-urgent-2025-04-18' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
genksyms: Handle typeof_unqual keyword and __seg_{fs,gs} qualifiers
clang-format: Update the ForEachMacros list for v6.15-rc1
- lib/prime_numbers: KUnit test should not select PRIME_NUMBERS
(Geert Uytterhoeven)
- ubsan: Fix panic from test_ubsan_out_of_bounds (Mostafa Saleh)
- ubsan: Remove 'default UBSAN' from UBSAN_INTEGER_WRAP (Nathan Chancellor)
- string: Add load_unaligned_zeropad() code path to sized_strscpy()
(Peter Collingbourne)
- kasan: Add strscpy() test to trigger tag fault on arm64 (Vincenzo
Frascino)
- Disable GCC randstruct for COMPILE_TEST
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRSPkdeREjth1dHnSE2KwveOeQkuwUCaAKv9QAKCRA2KwveOeQk
u160AP90D0BTkrwYIt1oRMOlN0LX0oipfFDiOKrxuZpgfwqYgwD/XHlTCglva+Kl
1Y0T/wUpA4tL8XoKtcs/kBzsWNyI6wU=
=4ji5
-----END PGP SIGNATURE-----
Merge tag 'hardening-v6.15-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux
Pull hardening fixes from Kees Cook:
- lib/prime_numbers: KUnit test should not select PRIME_NUMBERS (Geert
Uytterhoeven)
- ubsan: Fix panic from test_ubsan_out_of_bounds (Mostafa Saleh)
- ubsan: Remove 'default UBSAN' from UBSAN_INTEGER_WRAP (Nathan
Chancellor)
- string: Add load_unaligned_zeropad() code path to sized_strscpy()
(Peter Collingbourne)
- kasan: Add strscpy() test to trigger tag fault on arm64 (Vincenzo
Frascino)
- Disable GCC randstruct for COMPILE_TEST
* tag 'hardening-v6.15-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
lib/prime_numbers: KUnit test should not select PRIME_NUMBERS
ubsan: Fix panic from test_ubsan_out_of_bounds
lib/Kconfig.ubsan: Remove 'default UBSAN' from UBSAN_INTEGER_WRAP
hardening: Disable GCC randstruct for COMPILE_TEST
kasan: Add strscpy() test to trigger tag fault on arm64
string: Add load_unaligned_zeropad() code path to sized_strscpy()
- check for both the new AND old (deprecated) setter callback when
changing GPIO direction to output
-----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEEFp3rbAvDxGAT0sefEacuoBRx13IFAmgCkbUACgkQEacuoBRx
13JSKhAApWVjQAIlnfTXMRP0maX/XsNv3bw4hAoke8G3blvzcul+RY8j2kSyJUzU
gE3MMIo0Z5pbQocnnrtG78mYCzuLOKJTHpwqXSRzOKH8IrCGmLCo33MRePNov8CZ
LjdIfjbrJ+HVZopTBETVVnG8ApXV3FjwI1z77j7pyDGyy9T49Np6S09AgLdvZYAP
2svxq9YKQXcDWvTMPCnODHBppbMVLZbjvO7Cj88j2lB4ZQWDeZe+S+peeBXX6Bsf
HvDtudOBq0ueXhOB+Mxrg6m0s9zkv2b4nyiroAC+w7mY2vjgkh4M4oPsuE6MFt70
CzqTID8sQzRWsH8INqky2n5nNz252b5JTXUl7SQqwcpazzJysj9hPJt+oioSjdtv
ixTAlTAOsHT0BZPWZJ00cvdgmcAYfTrPeNbkftX8/X18UCkbLNBwn8Vl/rAge3QC
4cOCnwT3CrGFJx2XjvvC8Xna3uYXHodi6Ki1kNZrA/MEeeX1q1C/Pvj7Cgb0ScZq
OxYX5DKWQVYftDTR74mUEev9xcsF3uImBSH1kf9YESx1x9eh9jhrtAQSEWZtsFU8
Ie/M1Wm8X9FSxE9jzSQf6JY79qHPgYzZip971VbshvBPTJ6KNUjaV4un+aCoNJQo
spyOHwop6PNUdcXTpxfsNFo6dhbMUUGmYctb0RFu1+TACSB6jDc=
=Ghiw
-----END PGP SIGNATURE-----
Merge tag 'gpio-fixes-for-v6.15-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux
Pull gpio fix from Bartosz Golaszewski:
- check for both the new AND old (deprecated) setter callback when
changing GPIO direction to output
* tag 'gpio-fixes-for-v6.15-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux:
gpiolib: Allow to use setters with return value for output-only gpios
