The function disk_update_zone_resources() may call
disk_free_zone_resources() in case of error, and following this,
blk_revalidate_disk_zones() will again calls disk_free_zone_resources() if
disk_update_zone_resources() failed. If a zone worker thread is being used
(which is the default for a rotational media zoned device),
disk_free_zone_resources() will try to stop the zone worker thread twice
because disk->zone_wplugs_worker is not reset to NULL when the worker
thread is stopped the first time.
In disk_free_zone_resources(), fix this by correctly clearing
disk->zone_wplugs_worker to NULL when the worker thread is stopped.
And while at it, since disk_free_zone_resources() is always called after a
failed call to disk_update_zone_resources(), remove the unnecessary call
to disk_free_zone_resources() in disk_update_zone_resources().
Fixes: 1365b6904f ("block: allow submitting all zone writes from a single context")
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://patch.msgid.link/20260522115622.588535-1-dlemoal@kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
- Handle probe on hinted conditional branch instructions. BC.cond
instructions can be simulated in the same way as B.cond instructions,
so extend the decode mask for B.cond to cover BC.cond
- Flush the walk cache when unsharing PMD tables. Recent changes to
huge_pmd_unshare() introduced mmu_gather::unshared_tables but the
arm64 code was still treating the TLB flushing as only targeting leaf
entries (TLBI VALE1IS). Fix it by using non-leaf-only instructions
(TLBI VAE1IS) when tlb->unshared_tables is set
-----BEGIN PGP SIGNATURE-----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=koH2
-----END PGP SIGNATURE-----
Merge tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 fixes from Catalin Marinas:
- Handle probe on hinted conditional branch instructions.
BC.cond instructions can be simulated in the same way as B.cond
instructions, so extend the decode mask for B.cond to cover BC.cond
- Flush the walk cache when unsharing PMD tables. Recent changes to
huge_pmd_unshare() introduced mmu_gather::unshared_tables but the
arm64 code was still treating the TLB flushing as only targeting leaf
entries (TLBI VALE1IS).
Fix it by using non-leaf-only instructions (TLBI VAE1IS) when
tlb->unshared_tables is set
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
arm64: tlb: Flush walk cache when unsharing PMD tables
arm64: probes: Handle probes on hinted conditional branch instructions
- Fix PAI NNPA mismatch between counting and recording, where
sampling reports twice the value
- Fix loss of PAI counter increments during recording on systems
with many CPUs under heavy load, while counting is not affected
- On some supported machines, CHSC cannot access memory outside
the DMA zone, causing CHSC command failures. Restore GFP_DMA
flag when allocating memory for CHSC control blocks
- Align the numbering scheme for higher-level topology structures
like socket, book, drawer with other hardware identifiers e.g.
in sysfs, procfs and tools like lscpu
-----BEGIN PGP SIGNATURE-----
iI0EABYKADUWIQQrtrZiYVkVzKQcYivNdxKlNrRb8AUCag8nxxccYWdvcmRlZXZA
bGludXguaWJtLmNvbQAKCRDNdxKlNrRb8OulAQC/lQlKztFCEUad/yCXhfZnJbwz
zqUrq/5+JyKm8w1kPgEAq1cYMpzoUdcQ1D8N889SLe6o5aUPHO1fBu3VC6V0cg0=
=OS/x
-----END PGP SIGNATURE-----
Merge tag 's390-7.1-3' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull s390 fixes from Alexander Gordeev:
- Fix PAI NNPA mismatch between counting and recording, where sampling
reports twice the value
- Fix loss of PAI counter increments during recording on systems with
many CPUs under heavy load, while counting is not affected
- On some supported machines, CHSC cannot access memory outside the DMA
zone, causing CHSC command failures. Restore GFP_DMA flag when
allocating memory for CHSC control blocks
- Align the numbering scheme for higher-level topology structures like
socket, book, drawer with other hardware identifiers e.g. in sysfs,
procfs and tools like lscpu
* tag 's390-7.1-3' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
s390/topology: Use zero-based numbering for containing entities
s390/cio: Restore GFP_DMA for CHSC allocation
s390/pai: Fix missing PAI counter increments under heavy load
s390/pai: Disable duplicate read of kernel PAI counter value
-----BEGIN PGP SIGNATURE-----
iQFPBAABCAA5FiEEe7vIQRWZI0iWSE3xu+CwddJFiJoFAmoQJvUbFIAAAAAABAAO
bWFudTIsMi41KzEuMTIsMiwyAAoJELvgsHXSRYiavTcH/iKK1G+ygWOCqKrlZxir
/Ga7vPPQSXgiZEtEQ9ZIC/1UQeBp/eQc4uCzgy/aAMqksFjdwsFF/qs6mUr1ffHB
ne9RBk40zoP6KQfKkP8GW22ERmDOLnJ1t+QiCibrre8roM7vguDx0Sr5VXGoDmU5
p9mtomLzxJkuDV1gY7LGsT26Es+3PIpma8DTJwlhsUw2igAsp9XnfXJEjBu4eEXP
vfGkxK+go5+u4iH5/qKKw6MpfmV7z+O5WJsHaGaKyp8chc6lMSkqtFe1g15h6j6D
bL4D6jvmUuwTGsDVaufUnnKdM64+BtcCYJAkgzfKHhge8KG3eBlmsiLkK4uvNRo4
8NI=
=E0Wr
-----END PGP SIGNATURE-----
Merge tag 'slab-for-7.1-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/vbabka/slab
Pull slab fix from Vlastimil Babka:
- Stable fix for a missing cpus_read_lock in one of the cpu sheaves
flushing paths (Qing Wang)
* tag 'slab-for-7.1-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/vbabka/slab:
mm/slub: hold cpus_read_lock around flush_rcu_sheaves_on_cache()
Two minor updates for the DMA-mapping code, mainly fixing some rare
corner cases (Petr Tesarik, Jianpeng Chang).
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQSrngzkoBtlA8uaaJ+Jp1EFxbsSRAUCag/+/AAKCRCJp1EFxbsS
RC9gAP4qM5M9S2WrUJBCoeQrhUrQajNBXN1HV3N+hncHcgkCUwEA2nJq1oETLONH
UI4HDrtEBIUEXQgPWEmCj7krN5IYOw0=
=I4my
-----END PGP SIGNATURE-----
Merge tag 'dma-mapping-7.1-2026-05-22' of git://git.kernel.org/pub/scm/linux/kernel/git/mszyprowski/linux
Pull dma-mapping fixes from Marek Szyprowski:
"Two minor updates for the DMA-mapping code, mainly fixing some rare
corner cases (Petr Tesarik, Jianpeng Chang)"
* tag 'dma-mapping-7.1-2026-05-22' of git://git.kernel.org/pub/scm/linux/kernel/git/mszyprowski/linux:
dma-mapping: move dma_map_resource() sanity check into debug code
dma-direct: fix use of max_pfn
- Avoid NULL return from hist_field_name()
The function hist_field_name() is directly passed to a strcat()
which does not handle "NULL" characters. Return a zero length
string when size is greater than the limit.
This is used only to output already created histograms and no
field currently is greater than the limit. But it should still
not return NULL.
- Do not call map->ops->elt_free() on allocation failure
When elt_alloc() fails, it should not call the map->ops->elt_free()
function if it exists, as that function may not be able to handle
the free on allocation failures. The ->elt_free() should only be
called when elt_alloc() succeeds.
-----BEGIN PGP SIGNATURE-----
iIoEABYKADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCag+BVhQccm9zdGVkdEBn
b29kbWlzLm9yZwAKCRAp5XQQmuv6qor+AP94efFkLGAxuv7YIZsPrrkz+dh0XI/N
5asQe9sTnrfGiAD8DhE77S0DkZpMO+OE0J6mqTWmOVqds4RcuCWABxx12Ag=
=F67c
-----END PGP SIGNATURE-----
Merge tag 'trace-v7.1-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull tracing fixes from Steven Rostedt:
- Avoid NULL return from hist_field_name()
The function hist_field_name() is directly passed to a strcat() which
does not handle "NULL" characters. Return a zero length string when
size is greater than the limit.
This is used only to output already created histograms and no field
currently is greater than the limit. But it should still not return
NULL.
- Do not call map->ops->elt_free() on allocation failure
When elt_alloc() fails, it should not call the map->ops->elt_free()
function if it exists, as that function may not be able to handle the
free on allocation failures. The ->elt_free() should only be called
when elt_alloc() succeeds.
* tag 'trace-v7.1-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
tracing: Do not call map->ops->elt_free() if elt_alloc() fails
tracing: Avoid NULL return from hist_field_name() on truncation
The newly added driver requires the LED classdev support
and causes a link failure when that is disabled:
x86_64-linux-ld: vmlinux.o: in function `bitland_mifs_wmi_probe':
bitland-mifs-wmi.c:(.text+0xede02a): undefined reference to `devm_led_classdev_register_ext'
Fixes: dc1ec4fa86 ("platform/x86: bitland-mifs-wmi: Add new Bitland MIFS WMI driver")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://patch.msgid.link/20260519202804.1339581-1-arnd@kernel.org
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
For lshift and rshift, the shift operations are performed in a loop over
32-bit words. The loop calculates the shifted value and write it to dst,
and then immediately reads from src to calculate the carry for the next
iteration. Because src and dst could point to the same memory location,
the carry is incorrectly calculated using the newly modified dst value
instead of the original src value.
Adding a temporary local variable to cache the original value before
writing to dst and using it for the carry calculation solves the
problem. In addition, partial overlap is rejected from control plane for
all kind of operations including byteorder. This was tested with the
following bytecode:
table test_table ip flags 0 use 1 handle 1
ip test_table test_chain use 3 type filter hook input prio 0 policy accept packets 0 bytes 0 flags 1
ip test_table test_chain 2
[ immediate reg 1 0x44332211 0x88776655 ]
[ bitwise reg 1 = ( reg 1 << 0x08000000 ) ]
[ cmp eq reg 1 0x66443322 0x00887766 ]
[ counter pkts 0 bytes 0 ]
ip test_table test_chain 4 3
[ immediate reg 1 0x44332211 0x88776655 ]
[ bitwise reg 1 = ( reg 1 << 0x08000000 ) ]
[ cmp eq reg 1 0x55443322 0x00887766 ]
[ counter pkts 21794 bytes 1917798 ]
Fixes: 567d746b55 ("netfilter: bitwise: add support for shifts.")
Acked-by: Jeremy Sowden <jeremy@azazel.net>
Signed-off-by: Fernando Fernandez Mancera <fmancera@suse.de>
Signed-off-by: Florian Westphal <fw@strlen.de>
Functional coverage of nft_fib6_eval()'s nexthop enumeration over
three route shapes:
1) single external nexthop (nhid)
2) external nexthop group (nhid -> group)
3) old-style multipath (nexthop ... nexthop ...)
Each scenario places one nexthop on the input device (veth0). For
(2) and (3) the matching nexthop is the second member, so the walk
has to traverse beyond the primary nh. Two nft counters on prerouting
verify the data path: one increments only when fib reports veth0 as
the oif, the other counts "missing" results and must stay at zero.
./nft_fib_nexthop.sh
PASS: single external nexthop (nhid -> veth0)
PASS: nexthop group (dummy0 + veth0)
PASS: old-style multipath (sibling on veth0)
Suggested-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Jiayuan Chen <jiayuan.chen@linux.dev>
Signed-off-by: Florian Westphal <fw@strlen.de>
nft_fib6_info_nh_uses_dev() runs from nft_fib6_eval() in softirq under
rcu_read_lock(). fib6_siblings is modified by writers that hold
tb6_lock but do not wait for RCU readers, so the sibling walk should
use list_for_each_entry_rcu(): it adds READ_ONCE() on the ->next
pointer and lets CONFIG_PROVE_RCU_LIST validate the locking.
No functional change for non-debug builds.
Fixes: 1c32b24c23 ("netfilter: nft_fib_ipv6: switch to fib6_lookup")
Signed-off-by: Jiayuan Chen <jiayuan.chen@linux.dev>
Signed-off-by: Florian Westphal <fw@strlen.de>
Luxiao Xu says:
The function compat_mtw_from_user() converts ebtables extensions from
32-bit user structures to kernel native structures. However, it lacks
proper validation of the user-supplied match_size/target_size.
When certain extensions are processed, the kernel-side translation
logic may perform memory accesses based on the extension's expected
size. If the user provides a size smaller than what the extension
requires, it results in an out-of-bounds read as reported by KASAN.
This fix introduces a check to ensure match_size is at least as large
as the extension's required compatsize. This covers matches, watchers,
and targets, while maintaining compatibility with standard targets.
AFAIU this is relevant for matches that need to go though
match->compat_from_user() call. Those that use plain memcpy with the
user-provided size are ok because the caller checks that size vs the
start of the next rule entry offset (which itself is checked vs. total
size copied from userspace).
The ->compat_from_user() callbacks assume they can read compatsize bytes,
so they need this extra check.
Based on an earlier patch from Luxiao Xu.
Fixes: 81e675c227 ("netfilter: ebtables: add CONFIG_COMPAT support")
Reported-by: Yuan Tan <yuantan098@gmail.com>
Reported-by: Yifan Wu <yifanwucs@gmail.com>
Reported-by: Juefei Pu <tomapufckgml@gmail.com>
Reported-by: Xin Liu <bird@lzu.edu.cn>
Signed-off-by: Luxiao Xu <rakukuip@gmail.com>
Signed-off-by: Ren Wei <n05ec@lzu.edu.cn>
Reviewed-by: Fernando Fernandez Mancera <fmancera@suse.de>
Signed-off-by: Florian Westphal <fw@strlen.de>
Several parts of network stack rely on iph->ihl validation
done by network stack before PRE_ROUTING.
Disable this feature for user namespaces for now.
tcp option handling is likely safe even for LOCAL_IN, so this
this leaves tcp option mangling via nft_exthdr.c as-is.
I don't think these are the only means to alter packets, but these
appear to be relatively prominent.
This could be relaxed later. Example:
- allow userns for ingress hook.
- allow userns if base is transport header.
Also, we should revalidate or restrict generally:
- Don't allow linklayer writes to spill into network header
- restrict ipv4 and ipv6 to 'known safe' writes, e.g.
saddr/daddr/check/tos
Reported-by: Qi Tang <tpluszz77@gmail.com>
Reported-by: Tong Liu <lyutoon@gmail.com>
Tested-by: Qi Tang <tpluszz77@gmail.com>
Link: https://lore.kernel.org/netfilter-devel/20260515100411.3141-1-fw@strlen.de/
Signed-off-by: Florian Westphal <fw@strlen.de>
With PREEMPT_RCU we get splat:
BUG: using smp_processor_id() in preemptible [..]
caller is cpu_mt+0x53/0xd0 net/netfilter/xt_cpu.c:37
CPU: 1 .. Comm: syz.3.1377 #0 PREEMPT(full)
Call Trace:
<TASK>
dump_stack_lvl+0xe8/0x150 lib/dump_stack.c:120
check_preemption_disabled+0xd3/0xe0 lib/smp_processor_id.c:47
cpu_mt+0x53/0xd0 net/netfilter/xt_cpu.c:37
[..]
Just use raw version instead.
This is similar to 14d14a5d29 ("netfilter: nft_meta: use raw_smp_processor_id()").
Fixes: 0ca743a559 ("netfilter: nf_tables: add compatibility layer for x_tables")
Reported-by: syzbot+690d3e3ffa7335ac10eb@syzkaller.appspotmail.com
Signed-off-by: Florian Westphal <fw@strlen.de>
Quoting reporter:
A race between GRE keymap insertion and destruction can corrupt the
kernel list or use a freed object. `nf_ct_gre_keymap_add()` publishes a
new keymap pointer before the embedded `list_head` is linked, while
`nf_ct_gre_keymap_destroy()` can concurrently delete and free that
same object. An unprivileged user can reach this through the PPTP
conntrack helper by racing PPTP control messages or helper teardown,
leading to KASAN-detectable list corruption/UAF in kernel context.
## Root Cause Analysis
`exp_gre()` installs GRE expectations for a PPTP control flow and then
adds two GRE keymap entries [..]
The add path publishes `ct_pptp_info->keymap[dir]` before linking the
embedded list node [..]
Concurrent teardown deletes that partially initialized object.
Make add/destroy symmetric: install both, destroy both while under lock.
Furthermore, we should refuse to publish a new mapping in case ct is going
away, else we may leak the allocation.
The "retrans" detection is strange: existing mapping is checked for key
equality with the new mapping, then for "is on the list" via list walk.
But I can't see how an existing keymap entry can be NOT on list.
Change this to only check if we're asked to map same tuple again -- if so,
skip re-install, else signal failure.
Last, add a bug trap for the keymap list; it has to be empty when namespace
is going away.
Reported-by: Leo Lin <leo@depthfirst.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
synproxy_tstamp_adjust() rewrites the TCP timestamp option in place
and then patches the TCP checksum via inet_proto_csum_replace4() on
the caller-supplied tcphdr pointer. Both ipv4_synproxy_hook() and
ipv6_synproxy_hook() obtain that pointer with skb_header_pointer()
before calling in, so it may either alias skb->head directly or
point at the caller's on-stack _tcph buffer.
Between obtaining the pointer and using it, the function calls
skb_ensure_writable(skb, optend), which on a cloned or non-linear
skb invokes pskb_expand_head() and frees the old skb->head. After
that point the cached th is stale:
caller (ipv[46]_synproxy_hook)
th = skb_header_pointer(skb, ..., &_tcph)
synproxy_tstamp_adjust(skb, protoff, th, ...)
skb_ensure_writable(skb, optend)
pskb_expand_head() /* kfree(old skb->head) */
...
inet_proto_csum_replace4(&th->check, ...)
/* writes into freed head, or
into the caller's stack copy
leaving the on-wire checksum
stale */
The option bytes are written through skb->data and are fine; only
the checksum update goes through th and so lands in the wrong
place. The result is either a write into freed slab memory or a
packet leaving with a checksum that does not match its payload.
Fix by re-deriving th from skb->data + protoff immediately after
skb_ensure_writable() succeeds, so the subsequent checksum update
targets the linear, writable header.
Fixes: 48b1de4c11 ("netfilter: add SYNPROXY core/target")
Assisted-by: kres (claude-opus-4-7)
Signed-off-by: Chris Mason <clm@meta.com>
Reviewed-by: Fernando Fernandez Mancera <fmancera@suse.de>
Signed-off-by: Florian Westphal <fw@strlen.de>
An unintended behavior in the TCP conntrack state machine allows a
connection to be forced into the CLOSE state using an RST packet with an
invalid sequence number.
Specifically, after a SYN packet is observed, an RST with an invalid SEQ
can transition the conntrack entry to TCP_CONNTRACK_CLOSE, regardless of
whether the RST corresponds to the expected reply direction. The relevant
code path assumes the RST is a response to an outgoing SYN, but does not
validate packet direction or ensure that a matching SYN was actually sent
in the opposite direction.
As a result, a crafted packet sequence consisting of a SYN followed by an
invalid-sequence RST can prematurely terminate an active NAT entry. This
makes connection teardown easier than intended.
So, tighten the state transition logic to ensure that RST-triggered
CLOSE transitions only occur when the RST is a valid response to a
previously observed SYN in the correct direction.
Cc: stable@vger.kernel.org
Fixes: 9fb9cbb108 ("[NETFILTER]: Add nf_conntrack subsystem.")
Signed-off-by: Hamza Mahfooz <hamzamahfooz@linux.microsoft.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
If a firmware node is allocated on the stack (for instance: temporary
software node whose life-time we control) or on the heap - but using a
non-zeroing allocation function - and initialized using fwnode_init(),
its secondary pointer will contain uninitalized memory which likely will
be neither NULL nor IS_ERR() and so may end up being dereferenced (for
example: in dev_to_swnode()). Set fwnode->secondary to NULL on
initialization.
Cc: stable <stable@kernel.org>
Fixes: 01bb86b380 ("driver core: Add fwnode_init()")
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
Reviewed-by: Rafael J. Wysocki (Intel) <rafael@kernel.org>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Link: https://patch.msgid.link/20260506115701.23035-1-bartosz.golaszewski@oss.qualcomm.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
After a kexec/kdump reboot, the macb Ethernet controller fails to
receive any packets, causing DHCP to hang indefinitely and the network
interface to be unusable despite link being up.
The root cause is that RP1's level-triggered MSI-X interrupt sources
(such as macb on hwirq 6) may have their internal state machines stuck
in the "waiting for IACK" state. This happens because the previous
kernel crashed before sending the acknowledgment for a pending level
interrupt.
In this stuck state, RP1 will not generate new MSI-X writes even though
the interrupt source remains asserted. Since no new MSI-X is sent, the
GIC never sees a new edge, the chained IRQ handler is never invoked,
and the interrupt is permanently lost.
Fix this by sending MSIX_CFG_IACK in rp1_irq_activate(). This
unconditionally resets the MSI-X state machine back to idle when a
child device requests its interrupt. If the interrupt source is still
asserted, RP1 will immediately issue a new MSI-X with the freshly
configured msg_addr/msg_data, and normal interrupt delivery resumes.
Writing IACK when the state machine is already idle (i.e., on a normal
cold boot) is harmless — it has no effect.
Fixes: 49d63971f9 ("misc: rp1: RaspberryPi RP1 misc driver")
Cc: stable <stable@kernel.org>
Signed-off-by: Xiaolei Wang <xiaolei.wang@windriver.com>
Link: https://patch.msgid.link/20260518073405.2115003-1-xiaolei.wang@windriver.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The parport subsystem registers port devices before they are fully
initialised, resulting in a race condition where client drivers such
as lp can attach to ports that are not completely initialised or even
being torn down.
When the port and client drivers are built as modules and loaded
around the same time during boot, this occasionally results in a
crash. I was able to make this happen reliably in a VM with a
PC-style parallel port by patching parport_pc to fail probing:
> --- a/drivers/parport/parport_pc.c
> +++ b/drivers/parport/parport_pc.c
> @@ -2069,7 +2069,7 @@ static struct parport *__parport_pc_probe_port(unsigned long int base,
> if (!p)
> goto out3;
>
> - base_res = request_region(base, 3, p->name);
> + base_res = NULL;
> if (!base_res)
> goto out4;
>
and then running:
while true; do
modprobe lp & modprobe parport_pc
wait
rmmod lp parport_pc
done
for a few seconds.
In the long term I think port registration should be changed to put
the call to device_add() inside parport_announce_port(), but since the
latter currently cannot fail this will require changing all port
drivers.
For now, add a flag to indicate whether a port has been "announced"
and only try to attach client drivers to ports when the flag is set.
Fixes: 6fa45a2268 ("parport: add device-model to parport subsystem")
Closes: https://bugs.debian.org/1130365
Closes: https://lore.kernel.org/all/6ba903ad-9897-42bb-8c2d-337385cc3746@molgen.mpg.de/
Cc: stable <stable@kernel.org>
Signed-off-by: Ben Hutchings <benh@debian.org>
Acked-by: Sudip Mukherjee <sudipm.mukherjee@gmail.com>
Link: https://patch.msgid.link/afo6uBv68GDevbMD@decadent.org.uk
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
uio_pci_sva allocates struct uio_pci_sva_dev with devm_kzalloc() in
probe(), but then calls kfree(udev) both on the probe() error path
(label out_free) and again in remove().
Because devm_kzalloc() allocations are devres-managed and are freed
automatically when the device is detached (including after a failing
probe() and during driver unbind), the explicit kfree() can lead to a
double free.
If probe() fails after devm_kzalloc(), the error path frees udev and
devres cleanup will free it again when the core unwinds the partially
bound device. On normal driver removal, remove() frees udev and devres
will free it again when the device is detached.
This issue was identified by a static analysis tool I developed and
confirmed by manual review. Fix by removing the manual kfree() calls
and dropping the now-unused label.
Fixes: 3397c3cd85 ("uio: Add SVA support for PCI devices via uio_pci_generic_sva.c")
Cc: stable <stable@kernel.org>
Signed-off-by: Guangshuo Li <lgs201920130244@gmail.com>
Link: https://patch.msgid.link/20260505150256.614071-1-lgs201920130244@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When huge_pmd_unshare() is called to unshare a PMD table, the
tlb_unshare_pmd_ptdesc() function sets tlb->unshared_tables=true
but the aarch64 tlb_flush() only checked tlb->freed_tables to
determine whether to use TLBF_NONE (vae1is, invalidates walk
cache) or TLBF_NOWALKCACHE (vale1is, leaf-only).
This caused the stale PMD page table entry to remain in the walk cache
after unshare, potentially leading to incorrect page table walks.
Fix by including unshared_tables in the check, so that when
unsharing tables, TLBF_NONE is used and the walk cache is properly
invalidated.
Here is the detailed distinction between vae1is and vale1is:
| Instruction Combination | Actual Invalidation Scope |
| ------------------------ | --------------------------------------------------|
| `VAE1IS` + TTL=`0` | All entries at all levels (full invalidation) |
| `VAE1IS` + TTL=`2` (L2) | Non-leaf at Level 0/1 + leaf at Level 2 |
| `VALE1IS` + TTL=`0` | Leaf entries at all levels (non-leaf not cleared) |
| `VALE1IS` + TTL=`2` (L2) | Leaf entry at Level 2 only |
Signed-off-by: Zeng Heng <zengheng4@huawei.com>
Fixes: 8ce720d5bd ("mm/hugetlb: fix excessive IPI broadcasts when unsharing PMD tables using mmu_gather")
Cc: <stable@vger.kernel.org>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
In 6c37bebd8c, we switched to looping over the list and dropping each
individual node, ostensibly without the lock held in the loop body.
If the kernel were using Rust Edition 2024, the comment would be
accurate, and the lock would not be held across the drop. However, the
kernel is currently using 2021, so tail expression lifetime extension
results in the lock being held across the drop. Explicitly binding the
expression result to a variable makes the lockguard no longer part of a
tail expression, causing the lock to be dropped before entering the loop
body.
This was detected via `CONFIG_PROVE_LOCKING` identifying an invalid wait
context at the drop site.
Reported-by: David Stevens <stevensd@google.com>
Signed-off-by: Matthew Maurer <mmaurer@google.com>
Cc: stable <stable@kernel.org>
Fixes: 6c37bebd8c ("rust_binder: avoid mem::take on delivered_deaths")
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Acked-by: Carlos Llamas <cmllamas@google.com>
Link: https://patch.msgid.link/20260403-lockhold-v1-1-c332b56cd8ae@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When an outdated transaction is removed from `oneway_todo` due to
`TF_UPDATE_TXN`, its `Allocation` is dropped. The current implementation
of `Allocation::drop` calls `pending_oneway_finished()`, assuming the
transaction was executed. This leads to premature execution of the next
queued one-way transaction.
Fix this by taking the `oneway_node` from the `Allocation` of the
outdated transaction before it is dropped. This prevents
`Allocation::drop` from signaling completion.
We do not call `take_oneway_node()` from `Transaction::cancel` because
it's actually correct to call `pending_oneway_finished()` on cancel if
the transaction did not come from `oneway_todo`. This ensures that if
`BINDER_THREAD_EXIT` is invoked and cancels a oneway transaction, then
the next transaction is taken from `oneway_todo`.
This bug does not lead to any issues in the kernel, but may lead to
Binder delivering transactions to userspace earlier than userspace
expected to receive them.
Cc: stable <stable@kernel.org>
Fixes: eafedbc7c0 ("rust_binder: add Rust Binder driver")
Assisted-by: Antigravity:gemini
Signed-off-by: Alice Ryhl <aliceryhl@google.com>
Acked-by: Carlos Llamas <cmllamas@google.com>
Link: https://patch.msgid.link/20260414-tf-update-txn-fix-v1-1-d2b83303acc9@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Enable modular build since the driver now has a proper module_exit()
handler. There's nothing specific to DZ hardware to prevent driver
unloading and reloading from working.
Signed-off-by: Maciej W. Rozycki <macro@orcam.me.uk>
Link: https://patch.msgid.link/alpine.DEB.2.21.2605062331420.46195@angie.orcam.me.uk
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Prevent a crash from happening as the first serial port is initialised:
Console: switching to mono frame buffer device 160x64
fb0: PMAG-AA frame buffer device at tc0
DECstation Z85C30 serial driver version 0.10
CPU 0 Unable to handle kernel paging request at virtual address 0000002c, epc == 803ab00c, ra == 803aafe0
Oops[#1]:
CPU: 0 PID: 1 Comm: swapper Not tainted 6.4.0-rc3-00031-g84a9582fd203-dirty #57
$ 0 : 00000000 10012c00 803aaeb0 00000000
$ 4 : 80e12f60 80e12f50 80e12f58 81000030
$ 8 : 00000000 805ff37c 00000000 33433538
$12 : 65732030 00000006 80c2915d 6c616972
$16 : 80e12f00 807b7630 00000000 00000000
$20 : 00000004 00000348 000001a0 807623b8
$24 : 00000018 00000000
$28 : 80c24000 80c25d60 8078b148 803aafe0
Hi : 00000000
Lo : 00000000
epc : 803ab00c serial_base_ctrl_add+0x78/0xf4
ra : 803aafe0 serial_base_ctrl_add+0x4c/0xf4
Status: 10012c03 KERNEL EXL IE
Cause : 00000008 (ExcCode 02)
BadVA : 0000002c
PrId : 00000440 (R4400SC)
Modules linked in:
Process swapper (pid: 1, threadinfo=(ptrval), task=(ptrval), tls=00000000)
Stack : 80760000 00000cc0 00400044 00400040 803aa02c 80d61ab8 00000000 807b7630
80760000 807623b8 807b7628 803aa644 80386998 00000000 80e17780 80220f68
80e17780 80d61ab8 80c17d80 80e17780 80e17780 8063c798 80e17780 80383fa0
00000010 80e17780 00000000 80386998 807a0000 00000000 00400040 8038f848
807623b8 80d61ab8 00000004 80e17780 00000000 803a68e4 80c25e2c 803bb884
...
Call Trace:
[<803ab00c>] serial_base_ctrl_add+0x78/0xf4
[<803aa644>] serial_core_register_port+0x174/0x69c
[<8077e9ac>] zs_init+0xc8/0xfc
[<800404d4>] do_one_initcall+0x40/0x2ac
[<8076cecc>] kernel_init_freeable+0x1e4/0x270
[<80605bec>] kernel_init+0x20/0x108
[<800431e8>] ret_from_kernel_thread+0x14/0x1c
Code: 2442aeb0 ae120024 ae0200d0 <8c67002c> 50e00001 8c670000 3c06806e 3c05806e afb30010
---[ end trace 0000000000000000 ]---
(report at the offending commit) -- where a pointer is dereferenced that
has been derived from a null pointer to the port's parent device.
Since no device is available with legacy probing and it's not anymore a
preferable way to discover devices anyway, switch the driver to using a
platform device and use it as the port's parent device. Update resource
handling accordingly and only request the actual span of addresses used
within the slot, which will have had its resource already requested by
generic platform device code.
Use platform_driver_probe() not just because SCC devices are fixed with
solder on board and not straightforward to remove, but foremost because
the associated TTY's major device number is the same as used by the dz
driver and the first driver to claim it will prevent the other one from
using it. Either one DZ device or some SCC devices will be present in a
given system but never both at a time, and therefore we want the major
device number to be claimed by the first driver to actually successfully
bind to its device and platform_driver_probe() is a way to fulfil that.
An unfortunate consequence of the switch to a platform device is we now
hand the console over from the bootconsole much later in the bootstrap.
The firmware console handler appears good enough though to work so late
and in particular with interrupts enabled.
Since there is one way only remaining to reach zs_reset() now, remove
the port initialisation marker as no longer needed and go through the
channel reset unconditionally.
Fixes: 84a9582fd2 ("serial: core: Start managing serial controllers to enable runtime PM")
Signed-off-by: Maciej W. Rozycki <macro@orcam.me.uk>
Cc: stable@vger.kernel.org # needs to use .remove_new for <= 6.10
Link: https://patch.msgid.link/alpine.DEB.2.21.2605062328480.46195@angie.orcam.me.uk
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Prevent a crash from happening as the first serial port is initialised:
Console: switching to colour frame buffer device 160x64
tgafb: SFB+ detected, rev=0x02
fb0: Digital ZLX-E1 frame buffer device at 0x1e000000
DECstation DZ serial driver version 1.04
CPU 0 Unable to handle kernel paging request at virtual address 000000bc, epc == 8048b3a4, ra == 80470a78
Oops[#1]:
CPU: 0 UID: 0 PID: 1 Comm: swapper/0 Not tainted 6.19.0-dirty #35 NONE
$ 0 : 00000000 1000ac00 00000004 804707ac
$ 4 : 00000000 80e20850 80e20858 81000030
$ 8 : 00000000 8072c81c 00000008 fefefeff
$12 : 6c616972 00000006 80c5917f 69726420
$16 : 80e20800 00000000 808f8968 80e20800
$20 : 00000000 807f5a90 808b0094 808d3bc8
$24 : 00000018 80479030
$28 : 80c2e000 80c2fd70 00000069 80470a78
Hi : 00000004
Lo : 00000000
epc : 8048b3a4 __dev_fwnode+0x0/0xc
ra : 80470a78 serial_base_ctrl_add+0xa0/0x168
Status: 1000ac04 IEp
Cause : 30000008 (ExcCode 02)
BadVA : 000000bc
PrId : 00000220 (R3000)
Modules linked in:
Process swapper/0 (pid: 1, threadinfo=(ptrval), task=(ptrval), tls=00000000)
Stack : 00400044 00400040 8046f4cc 00000000 808a6148 808a0000 808f8968 8086983c
808e0000 8046fc84 1000ac01 00000028 80e20700 802ba3f8 80e20700 80d34a94
80c1b900 80e20700 80e20700 80e20700 80e20700 80444650 00000000 00000000
00000000 807f5a90 808b0094 80447080 00400040 808e0000 80d34a94 808a6148
80d34a94 00000004 80e20700 00000000 8076974c 80469810 80c2fe3c 1000ac01
...
Call Trace:
[<8048b3a4>] __dev_fwnode+0x0/0xc
[<80470a78>] serial_base_ctrl_add+0xa0/0x168
[<8046fc84>] serial_core_register_port+0x1c8/0x974
[<808c6af0>] dz_init+0x74/0xc8
[<800470e0>] do_one_initcall+0x44/0x2d4
[<808b111c>] kernel_init_freeable+0x258/0x308
[<8072e434>] kernel_init+0x20/0x114
[<80049cd0>] ret_from_kernel_thread+0x14/0x1c
Code: 27bd0018 03e00008 2402ffea <8c8200bc> 03e00008 00000000 27bdffc0 afbe0038 afb30024
---[ end trace 0000000000000000 ]---
-- where a pointer is dereferenced that has been derived from a null
pointer to the port's parent device.
Since no device is available with legacy probing and it's not anymore a
preferable way to discover devices anyway, switch the driver to using a
platform device and use it as the port's parent device. Update resource
handling accordingly and only request the actual span of addresses used
within the slot, which will have had its resource already requested by
generic platform device code.
Use platform_driver_probe() not just because the DZ device is fixed with
solder on board and not straightforward to remove, but foremost because
the associated TTY's major device number is the same as used by the zs
driver and the first driver to claim it will prevent the other one from
using it. Either one DZ device or some SCC devices will be present in a
given system but never both at a time, and therefore we want the major
device number to be claimed by the first driver to actually successfully
bind to its device and platform_driver_probe() is a way to fulfil that.
An unfortunate consequence of the switch to a platform device is we now
hand the console over from the bootconsole much later in the bootstrap.
The firmware console handler appears good enough though to work so late
and in particular with interrupts enabled.
Conversely only starting the console port so late lets the reset code
fully utilise our delay handlers, so switch from udelay() to fsleep()
for transmitter draining so as to avoid busy-waiting for an excessive
amount of time.
Fixes: 84a9582fd2 ("serial: core: Start managing serial controllers to enable runtime PM")
Signed-off-by: Maciej W. Rozycki <macro@orcam.me.uk>
Cc: stable@vger.kernel.org # needs to use .remove_new for <= 6.10
Link: https://patch.msgid.link/alpine.DEB.2.21.2605062326540.46195@angie.orcam.me.uk
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Switch the driver to using the channel reset rather than hardware reset,
simplifying handling by removing an interference between channels that
causes the other channel to become uninitialised afterwards.
There is little difference between the two kinds of reset in terms of
register settings that result, and we initialise the whole register set
right away anyway. However this prevents a hang from happening should
the console output handler in the firmware try to access the other port
whose transmitter has been disabled and line parameters messed up.
For example this will happen if the keyboard port (port A) is chosen for
the system console, unusually but not insanely for a headless system, as
the port is wired to a standard DA-15 connector and an adapter can be
easily made. Or with the next change in place this would happen for the
regular console port (port B), since the keyboard port (port A) will be
initialised first.
Just remove the unnecessary complication then, a channel reset is good
enough. We still need the initialisation marker, now per channel rather
than per SCC, as for the console port zs_reset() will be called twice:
once early on via zs_serial_console_init() for the console setup only,
and then again via zs_config_port() as the port is associated with a TTY
device.
Fixes: 8b4a40809e ("zs: move to the serial subsystem")
Signed-off-by: Maciej W. Rozycki <macro@orcam.me.uk>
Cc: stable@vger.kernel.org # v2.6.23+
Link: https://patch.msgid.link/alpine.DEB.2.21.2605062323430.46195@angie.orcam.me.uk
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Calling zs_reset() in the course of setting up the serial device causes
line parameters to be reset and the transmitter disabled. We've been
lucky in that no message is usually produced to the kernel log between
this call and the later call to uart_set_options() in the course of
console setup done by zs_serial_console_init(), or the system would hang
as the console output handler in the firmware tried to access a port the
transmitter of which has been disabled and line parameters messed up.
This will change with the next change to the driver, so fix zs_reset()
such that line parameters are set for 9600n8 console operation as with
the system firmware and the transmitter re-enabled after reset. This
also means zs_pm() serves no purpose anymore, so drop it.
Fixes: 8b4a40809e ("zs: move to the serial subsystem")
Signed-off-by: Maciej W. Rozycki <macro@orcam.me.uk>
Cc: stable@vger.kernel.org # v2.6.23+
Link: https://patch.msgid.link/alpine.DEB.2.21.2605062308040.46195@angie.orcam.me.uk
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Calling dz_reset() in the course of setting up the serial device causes
line parameters to be reset and the transmitter disabled. We've been
lucky in that no message is usually produced to the kernel log between
this call and the later call to uart_set_options() in the course of
console setup done by dz_serial_console_init(), or the system would hang
as the console output handler in the firmware tried to access a port the
transmitter of which has been disabled and line parameters messed up.
This will change with the next change to the driver, so fix dz_reset()
such that line parameters are set for 9600n8 console operation as with
the system firmware and the transmitter re-enabled after reset. This
also means dz_pm() serves no purpose anymore, so drop it.
Fixes: e6ee512f5a ("dz.c: Resource management")
Signed-off-by: Maciej W. Rozycki <macro@orcam.me.uk>
Cc: stable@vger.kernel.org # v2.6.25+
Link: https://patch.msgid.link/alpine.DEB.2.21.2605062302010.46195@angie.orcam.me.uk
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In the DZ interface as implemented by the DC7085 gate array the serial
transmitters are double buffered, meaning that at the time a transmitter
is ready to accept the next character there is one in the transmit shift
register still being sent to the line. Issuing a master clear at this
time causes this character to be lost, so wait an extra amount of time
sufficient for the transmit shift register to drain at 9600bps, which is
the baud rate setting used by the firmware console.
Mind the specified 1.4us TRDY recovery time in the course and continue
using iob() as the completion barrier, since the platforms involved use
a write buffer that can delay and combine writes, and reorder them with
respect to reads regardless of the MMIO locations accessed and we still
lack a platform-independent handler for that.
When called from dz_serial_console_init() this is too early for fsleep()
to work and even before lpj has been calculated and therefore the delay
is actually not sufficient for the transmitter to drain and is merely a
placeholder now. This will be addressed in a follow-up change.
Fixes: e6ee512f5a ("dz.c: Resource management")
Signed-off-by: Maciej W. Rozycki <macro@orcam.me.uk>
Cc: stable@vger.kernel.org # v2.6.25+
Link: https://patch.msgid.link/alpine.DEB.2.21.2605062259080.46195@angie.orcam.me.uk
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
dw8250_handle_irq() calls serial8250_handle_irq_locked() with the port
lock held via guard(uart_port_lock_irqsave). The guard destructor is
plain uart_port_unlock_irqrestore(), so a SysRq character captured into
port->sysrq_ch by uart_prepare_sysrq_char() is dropped without ever
being dispatched to handle_sysrq().
This is the same regression pattern as in serial8250_handle_irq(),
introduced when 883c5a2bc9 ("serial: 8250_dw: Rework
dw8250_handle_irq() locking and IIR handling") moved the function to
the guard()-based locking scheme without using the sysrq-aware unlock
helper.
Switch to guard(uart_port_lock_check_sysrq_irqsave) so that captured
sysrq_ch is dispatched on scope exit, matching the fix in
serial8250_handle_irq().
Fixes: 883c5a2bc9 ("serial: 8250_dw: Rework dw8250_handle_irq() locking and IIR handling")
Cc: stable@vger.kernel.org
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Jacques Nilo <jnilo@free.fr>
Link: https://patch.msgid.link/ed56fcaf4af24e4ed011a7bce206e0182acb761c.1778675349.git.jnilo@free.fr
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
serial8250_handle_irq() captures a SysRq character into port->sysrq_ch
inside serial8250_handle_irq_locked() via uart_prepare_sysrq_char()
(reached from serial8250_read_char()). Dispatch of that captured
character to handle_sysrq() is expected to happen at port-unlock time,
through uart_unlock_and_check_sysrq[_irqrestore]().
After commit 8324a54f60 ("serial: 8250: Add
serial8250_handle_irq_locked()") the function was reduced to a wrapper
that takes the port lock via guard(uart_port_lock_irqsave) whose
destructor is plain uart_port_unlock_irqrestore(). The sysrq-aware
unlock helper is no longer called, so port->sysrq_ch is captured but
never dispatched: BREAK + SysRq key is consumed silently.
This was the very condition Johan Hovold's 853a9ae29e ("serial:
8250: fix handle_irq locking", 2021) introduced
uart_unlock_and_check_sysrq_irqrestore() to address.
Switch to the new guard(uart_port_lock_check_sysrq_irqsave), whose
destructor is the sysrq-aware unlock helper, restoring the pre-split
behaviour. Update the Context: comment on serial8250_handle_irq_locked()
so future HW-specific 8250 wrappers know to use the same guard or the
explicit sysrq-aware unlock.
Verified on RTL8196E with CONFIG_MAGIC_SYSRQ_SERIAL=y: BREAK + 'h' on
the console UART produces the SysRq help dump in dmesg and the brk
counter in /proc/tty/driver/serial increments correctly.
Fixes: 8324a54f60 ("serial: 8250: Add serial8250_handle_irq_locked()")
Cc: stable@vger.kernel.org
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Jacques Nilo <jnilo@free.fr>
Link: https://patch.msgid.link/52692ae6c3501f7940347cef364ad7fcacaab7e5.1778675349.git.jnilo@free.fr
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
uart_handle_break() and uart_prepare_sysrq_char() (in
include/linux/serial_core.h) capture a SysRq character into
port->sysrq_ch while the port lock is held and rely on the unlock
helper -- uart_unlock_and_check_sysrq_irqrestore() -- to dispatch the
captured character to handle_sysrq() on scope exit.
The existing guard(uart_port_lock_irqsave) cannot be used by IRQ
handlers that process RX, because its destructor calls plain
uart_port_unlock_irqrestore() and silently drops port->sysrq_ch.
Add a dedicated guard(uart_port_lock_check_sysrq_irqsave) variant
whose destructor is the sysrq-aware unlock helper. The lock side is
identical to uart_port_lock_irqsave -- only the unlock-time behaviour
differs. Callers that may capture SysRq characters must use
guard(uart_port_lock_check_sysrq_irqsave); the existing
guard(uart_port_lock_irqsave) keeps its current plain-unlock semantics
for the many callers that do not process RX.
The new macro is placed after the CONFIG_MAGIC_SYSRQ_SERIAL block so
both definitions of uart_unlock_and_check_sysrq_irqrestore() (sysrq
enabled and disabled) are visible at expansion time. When
CONFIG_MAGIC_SYSRQ_SERIAL=n the destructor degenerates to plain
uart_port_unlock_irqrestore(), so there is no overhead.
No functional change on its own; users are converted in the following
patches.
Cc: stable@vger.kernel.org
Signed-off-by: Jacques Nilo <jnilo@free.fr>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://patch.msgid.link/3849af4bc55d5d2a424fa850844e94d641b2f8a6.1778675349.git.jnilo@free.fr
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Sashiko identified a deadlock when the console flow is engaged [1].
When console flow control is enabled (UPF_CONS_FLOW),
s3c24xx_serial_stop_tx() calls s3c24xx_serial_rx_enable() and
s3c24xx_serial_start_tx() calls s3c24xx_serial_rx_disable().
The serial core framework invokes the .stop_tx() and .start_tx()
callbacks with the port->lock spinlock already held. Furthermore, all
internal driver paths that invoke stop_tx (such as the DMA TX
completion handler s3c24xx_serial_tx_dma_complete() or the PIO TX IRQ
handler s3c24xx_serial_tx_irq()) also acquire port->lock prior to
calling it. (Note that s3c24xx_serial_start_tx() is only invoked by the
serial core).
However, s3c24xx_serial_rx_enable() and s3c24xx_serial_rx_disable()
unconditionally attempt to acquire port->lock again using
uart_port_lock_irqsave(). Since spinlocks are not recursive, this
causes a deadlock on the same CPU when console flow control is engaged.
Remove the redundant lock acquisition from both rx helper functions.
Cc: stable <stable@kernel.org>
Fixes: b497549a03 ("[ARM] S3C24XX: Split serial driver into core and per-cpu drivers")
Reported-by: John Ogness <john.ogness@linutronix.de>
Closes: https://sashiko.dev/#/patchset/20260506121606.5805-1-john.ogness%40linutronix.de [1]
Signed-off-by: Tudor Ambarus <tudor.ambarus@linaro.org>
Link: https://patch.msgid.link/20260515-samsung-tty-flow-control-deadlock-v1-1-93255edbc9bc@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
altera_jtaguart_probe() maps the register window before registering the
UART port, but it ignores failures from uart_add_one_port(). If port
registration fails, probe still returns success and the mapping remains
live until a later remove path that is not part of probe failure cleanup.
Return the uart_add_one_port() error and unmap the register window on
that failure path.
This issue was identified during our ongoing static-analysis research while
reviewing kernel code.
Fixes: 5bcd601049 ("serial: Add driver for the Altera JTAG UART")
Cc: stable <stable@kernel.org>
Co-developed-by: Ijae Kim <ae878000@gmail.com>
Signed-off-by: Ijae Kim <ae878000@gmail.com>
Signed-off-by: Myeonghun Pak <mhun512@gmail.com>
Link: https://patch.msgid.link/20260512065837.79528-1-mhun512@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The VENDOR_CLASS_DATA_IFACE and ALWAYS_POLL_CTRL quirk flags added in
commit f58752ebcb ("USB: cdc-acm: Add quirks for Yoga Book 9 14IAH10
INGENIC touchscreen") were placed inside the acm_ctrl_msg() function
rather than in the header with the other quirk flags. Then, their
values (BIT(9) and BIT(10)) collided with NO_UNION_12 which is already
BIT(9).
Move the definitions to drivers/usb/class/cdc-acm.h where they belong
and shift them to BIT(10) and BIT(11) to avoid the overlap.
Fixes: f58752ebcb ("USB: cdc-acm: Add quirks for Yoga Book 9 14IAH10 INGENIC touchscreen")
Cc: stable <stable@kernel.org>
Signed-off-by: Wentao Guan <guanwentao@uniontech.com>
Link: https://patch.msgid.link/20260522091357.1301196-1-guanwentao@uniontech.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In case of memory pressure, it's possible that a guest page gets freed
and then almost immediately reused by the guest. If CMMA is enabled,
_essa_clear_cbrl() will discard all pages that are either unused or
zero. If a discarded page is reused before _essa_clear_cbrl() is called,
and the pgste.zero bit is not cleared, the page will be discarded
despite not being unused.
When calling _gmap_ptep_xchg(), always clear the pgste.zero bit. This
prevents the page from being accidentally discarded when not unused.
Signed-off-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Fixes: a2c17f9270 ("KVM: s390: New gmap code")
Reviewed-by: Steffen Eiden <seiden@linux.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@linux.ibm.com>
The address passed to the gmap rmap was not being masked. As a
consequence several different (but functionally equivalent) rmap
entries were being created for each shadowed table.
Fix this by properly masking the address depending on the table level.
Signed-off-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Fixes: a2c17f9270 ("KVM: s390: New gmap code")
Reviewed-by: Christian Borntraeger <borntraeger@linux.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@linux.ibm.com>
In some cases (i.e. under extreme memory pressure on the host),
attempting to shadow memory will result in the same memory being
unshadowed, causing a loop.
Add a PGSTE bit to distinguish between shadowed memory and shadowed DAT
tables, fix the unshadowing logic in _gmap_ptep_xchg() to prevent
unnecessary unshadowing and perform better checks.
Also fix the unshadowing logic in _gmap_crstep_xchg_atomic() which did
not unshadow properly when the large page would become unprotected.
Opportunistically add a check in gmap_protect_rmap() to make sure it
won't be called with level == TABLE_TYPE_PAGE_TABLE.
Signed-off-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Fixes: a2c17f9270 ("KVM: s390: New gmap code")
Reviewed-by: Christian Borntraeger <borntraeger@linux.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@linux.ibm.com>
Fix a memory leak that can happen if gmap_ucas_map_one() or
kvm_s390_mmu_cache_topup() return error values.
Also fix a similar issue in gmap_set_limit().
Signed-off-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Fixes: a2c17f9270 ("KVM: s390: New gmap code")
Reported-by: Jiaxin Fan <jiaxin.fan@ibm.com>
Reviewed-by: Christian Borntraeger <borntraeger@linux.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@linux.ibm.com>
When performing a partial unshadowing, the rmap was being leaked.
Add the missing kfree().
Fixes: a2c17f9270 ("KVM: s390: New gmap code")
Signed-off-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Reviewed-by: Christoph Schlameuss <schlameuss@linux.ibm.com>
Reviewed-by: Christian Borntraeger <borntraeger@linux.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@linux.ibm.com>
We're not allowed to dereference "urb" after calling
usb_hcd_giveback_urb() so save the urb->status ahead of time.
Fixes: 7359d482eb ("staging: HCD files for the DWC2 driver")
Cc: stable <stable@kernel.org>
Signed-off-by: Dan Carpenter <error27@gmail.com>
Link: https://patch.msgid.link/ag1NwBpqT4IEQcdJ@stanley.mountain
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When a system contains multiple USB controllers, the global ci_role_switch
variable may be overwritten by subsequent driver initialization code.
This can cause issues in the following cases:
- The 2nd ci_hdrc_probe() sees ci_role_switch.fwnode as non-NULL even
though the "usb-role-switch" property is not present for the controller.
- When the ci_hdrc device is unbound and bound again, ci_role_switch
fwnode will not be reassigned, and the old value will be used instead.
Convert ci_role_switch to a local variable to fix these issues.
Fixes: 05559f10ed ("usb: chipidea: add role switch class support")
Cc: stable <stable@kernel.org>
Acked-by: Peter Chen <peter.chen@kernel.org>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Xu Yang <xu.yang_2@nxp.com>
Link: https://patch.msgid.link/20260427075755.3611217-1-xu.yang_2@nxp.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
ffs_epfile_dmabuf_io_complete() calls usb_ep_free_request() on the
completed request but leaves priv->req, the back-pointer that
ffs_dmabuf_transfer() set on submission, pointing at the freed
memory. A later FUNCTIONFS_DMABUF_DETACH ioctl or
ffs_epfile_release() on the close path still sees priv->req
non-NULL under ffs->eps_lock:
if (priv->ep && priv->req)
usb_ep_dequeue(priv->ep, priv->req);
so usb_ep_dequeue() is called on a freed usb_request.
On dummy_hcd the dequeue path only walks a live queue and
pointer-compares, so the freed pointer reads without faulting and
KASAN requires an explicit check at the FunctionFS call site to
surface the use-after-free. On SG-capable in-tree UDCs the
dequeue path dereferences the supplied request immediately:
* chipidea's ep_dequeue() does
container_of(req, struct ci_hw_req, req) and reads
hwreq->req.status before acquiring its own lock.
* cdnsp's cdnsp_gadget_ep_dequeue() reads request->status first.
The narrower option of clearing priv->req via cmpxchg() in the
completion does not close the race: the completion runs without
eps_lock, so a cancel path holding eps_lock can still observe
priv->req non-NULL, race a concurrent completion that clears and
frees, and pass the freed pointer to usb_ep_dequeue(). A slightly
longer fix that moves the free into the cleanup work is needed.
Same class of lifetime race as the recent usbip-vudc timer fix [1].
Take eps_lock in the sole place that mutates priv->req from the
callback direction by moving usb_ep_free_request() out of the
completion into ffs_dmabuf_cleanup(), the existing work handler
scheduled by ffs_dmabuf_signal_done() on
ffs->io_completion_wq. Clear priv->req there under eps_lock
before freeing, and only clear if priv->req still names our
request (a subsequent ffs_dmabuf_transfer() on the same
attachment may have queued a new one).
This keeps the existing dummy_hcd sync-dequeue invariant: the
completion callback is still invoked by the UDC without
eps_lock held (dummy_hcd drops its own lock before calling the
callback), and the callback now takes no f_fs lock at all.
Serialization against the cancel path happens in cleanup, which
runs from the workqueue with no f_fs lock held on entry.
The priv ref count protects the containing ffs_dmabuf_priv:
ffs_dmabuf_transfer() takes a ref via ffs_dmabuf_get(), cleanup
drops it via ffs_dmabuf_put(), so priv stays live for the
cleanup even after the cancel path's list_del + ffs_dmabuf_put.
The ffs_dmabuf_transfer() error path no longer frees usb_req
inline: fence->req and fence->ep are set before usb_ep_queue(),
so ffs_dmabuf_cleanup() (scheduled by the error-path
ffs_dmabuf_signal_done()) owns the free regardless of whether
the queue succeeded.
Reproduced under KASAN on both detach and close paths against
dummy_hcd with an observability hook
(kasan_check_byte(priv->req) immediately before usb_ep_dequeue)
at the two FunctionFS cancel sites to surface the stale-pointer
access; the hook is not part of this patch. The KASAN
allocator / free stacks in the captured splats identify the
same request: alloc in dummy_alloc_request, free in
dummy_timer, fault reached from ffs_epfile_release (close) and
from the FUNCTIONFS_DMABUF_DETACH ioctl (detach). With the
patch applied, both paths are silent under the same hook.
The bug is reached from the FunctionFS device node, which in
real deployments is owned by the privileged gadget daemon
(adbd, UMS, composite gadget services, etc.); it is not
reachable from unprivileged userspace or from a USB host on the
cable. FunctionFS mounts default to GLOBAL_ROOT_UID, but the
filesystem supports uid=, gid=, and fmode= delegation to a
non-root gadget daemon, so on real deployments the attacker may
be a less-privileged service rather than root.
Fixes: 7b07a2a7ca ("usb: gadget: functionfs: Add DMABUF import interface")
Link: https://lore.kernel.org/all/20260417163552.807548-1-michael.bommarito@gmail.com/ [1]
Cc: stable <stable@kernel.org>
Assisted-by: Claude:claude-opus-4-7
Signed-off-by: Michael Bommarito <michael.bommarito@gmail.com>
Link: https://patch.msgid.link/20260419161227.1587668-1-michael.bommarito@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
ffs_ep0_read() allocates its control-OUT data buffer with
kmalloc() (not kzalloc) at the Length value from the Setup
packet, then copies that full len to userspace regardless of
how many bytes were actually received:
data = kmalloc(len, GFP_KERNEL);
...
ret = __ffs_ep0_queue_wait(ffs, data, len);
if ((ret > 0) && (copy_to_user(buf, data, len)))
ret = -EFAULT;
__ffs_ep0_queue_wait() returns req->actual, which on a short
control OUT transfer is strictly less than len. The
copy_to_user() call still copies len bytes, so on a short OUT
the last (len - ret) bytes of the kmalloc() buffer --
uninitialised slab residue -- are delivered to the FunctionFS
daemon.
Short ep0 OUT completions are specified USB control-transfer
behavior and are produced by in-tree UDCs:
* dwc2 continues on req->actual < req->length for ep0 DATA OUT
(short-not-ok is the only ep0-OUT stall path).
* aspeed_udc ends ep0 OUT on rx_len < ep->ep.maxpacket.
* renesas_usbf logs "ep0 short packet" and completes the
request.
* dwc3 stalls on short IN but not on short OUT.
A short ep0 OUT is therefore not evidence of a broken UDC; it is
a normal condition f_fs has to cope with. The sibling gadgetfs
implementation in drivers/usb/gadget/legacy/inode.c already does
this correctly via min(len, dev->req->actual) before
copy_to_user(). This patch brings f_fs.c to the same safe
pattern rather than trimming at a defensive layer.
The bug is reached from the FunctionFS device node, which in
real deployments is owned by the privileged gadget daemon
(adbd, UMS, composite gadget services, etc.); it is not
reachable from unprivileged userspace. Linux host stacks
normally reject short-wLength control OUTs before they reach
the gadget, so reproducing this required a build that
bypasses that host-side check. With the bypass in place, a
1-byte payload on a 64-byte Setup produces 63 bytes of
non-canary slab residue in the daemon's read buffer.
Fix by copying only ret (actually received) bytes to
userspace.
Fixes: ddf8abd259 ("USB: f_fs: the FunctionFS driver")
Cc: stable <stable@kernel.org>
Assisted-by: Claude:claude-opus-4-7
Signed-off-by: Michael Bommarito <michael.bommarito@gmail.com>
Link: https://patch.msgid.link/20260419160359.1577270-1-michael.bommarito@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The `dummy_hub_control()` function handles USB hub class requests
to the virtual root hub. The `GetPortStatus` case returns -EPIPE for
requests with `wIndex != 1`, since the virtual root hub has only a
single port. However, the `ClearPortFeature` and `SetPortFeature`
cases lack the same check.
Fix this by extending the `wIndex != 1` rejection to both cases,
matching the existing behavior of `GetPortStatus`.
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Cc: stable <stable@kernel.org>
Suggested-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Seungjin Bae <eeodqql09@gmail.com>
Reviewed-by: Alan Stern <stern@rowland.harvard.edu>
Link: https://patch.msgid.link/20260518234314.1889396-1-eeodqql09@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The EIC7700 USB requires a USB PHY reset operation; otherwise, the USB
will not work. The reason why the USB driver that was applied can work
properly is that the USB PHY has already been reset in ESWIN's U-Boot.
However, the proper functioning of the USB driver should not be dependent
on the bootloader. Therefore, it is necessary to incorporate the USB PHY
reset signal into the DT bindings.
This patch does not introduce any backward incompatibility since the dts
is not upstream yet. As array of reset operations are used in the driver,
no modifications to the USB controller driver are needed.
Fixes: c640a4239d ("dt-bindings: usb: Add ESWIN EIC7700 USB controller")
Cc: stable <stable@kernel.org>
Signed-off-by: Hang Cao <caohang@eswincomputing.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://patch.msgid.link/20260415064238.1784-1-caohang@eswincomputing.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch follows up Zheng Wang's 2023 report of a use-after-free in
vudc_remove(). The original thread stalled on Shuah Khan's request for
runtime testing of the unplug/unbind path. This patch supplies that
testing and keeps Zheng's original fix shape.
In vudc_probe(), v_init_timer() binds udc->tr_timer.timer to v_timer().
usbip_sockfd_store() starts the timer via v_start_timer()/v_kick_timer().
vudc_remove() can then free the containing struct vudc while the timer is
still pending or executing.
KASAN confirms the race on an unpatched x86_64 QEMU guest with
CONFIG_KASAN=y, CONFIG_USBIP_VUDC=y, CONFIG_USB_ZERO=y, and a tight loop
that repeatedly writes a socket fd to usbip_sockfd, closes the socket
pair, and unbinds/rebinds usbip-vudc.0:
BUG: KASAN: slab-use-after-free in __run_timer_base.part.0+0x8ba/0x8e0
Write of size 8 at addr ffff888001b80740 by task trigger_and_unb/239
Allocated by task 239:
vudc_probe+0x4d/0xaa0
Freed by task 239:
kfree+0x18f/0x520
device_release_driver_internal+0x388/0x540
unbind_store+0xd9/0x100
This lands in the timer core rather than v_timer() itself because the
embedded timer_list is being walked after its containing struct vudc has
already been freed. The underlying lifetime bug is the same one Zheng
reported.
With v_stop_timer() called from vudc_remove() and the timer deleted
synchronously, the same harness completed 5000 bind/unbind iterations
with no KASAN report.
Fixes: b6a0ca1118 ("usbip: vudc: Add UDC specific ops")
Cc: stable <stable@kernel.org>
Reported-by: Zheng Wang <zyytlz.wz@163.com>
Closes: https://lore.kernel.org/linux-usb/20230317100954.2626573-1-zyytlz.wz@163.com/
Signed-off-by: Michael Bommarito <michael.bommarito@gmail.com>
Acked-by: Shuah Khan <skhan@linuxfoundation.org>
Link: https://patch.msgid.link/20260417163552.807548-1-michael.bommarito@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
