The FMan driver has support for 2 MACs: mEMAC (newer, present on
Layerscape and PowerPC T series) and dTSEC/TGEC (older, present on
PowerPC P series). I only have handy access to the mEMAC, and this adds
support for MAC counters for those platforms.
MAC counters are necessary for any kind of low-level debugging, and
currently there is no mechanism to dump them.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://patch.msgid.link/20251122115931.151719-1-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The DPAA phylink conversion in the following commits partially developed
code for handling the 2500base-x host interface mode (called "2.5G
SGMII" in LS1043A/LS1046A reference manuals).
- 0fc83bd795 ("net: fman: memac: Add serdes support")
- 5d93cfcf73 ("net: dpaa: Convert to phylink")
In principle, having phy-interface-mode = "2500base-x" and a pcsphy-handle
(unnamed or with pcs-handle-names = "sgmii") in the MAC device tree node
results in PHY_INTERFACE_MODE_2500BASEX being set in phylink_config ::
supported_interfaces, but this isn't sufficient.
Because memac_select_pcs() returns no PCS for PHY_INTERFACE_MODE_2500BASEX,
the Lynx PCS code never engages. There's a chance the PCS driver doesn't
have any configuration to change for 2500base-x fixed-link (based on
bootloader pre-initialization), but there's an even higher chance that
this is not the case, and the PCS remains misconfigured.
More importantly, memac_if_mode() does not handle
PHY_INTERFACE_MODE_2500BASEX, and it should be telling the mEMAC to
configure itself in GMII mode (which is upclocked by the PCS). Currently
it prints a WARN_ON() and returns zero, aka IF_MODE_10G (incorrect).
The additional case statement in memac_prepare() for calling
phy_set_mode_ext() does not make any difference, because there is no
generic PHY driver for the Lynx 10G SerDes from LS1043A/LS1046A. But we
add it nonetheless, for consistency.
Regarding the question "did 2500base-x ever work with the FMan mEMAC
mainline code prior to the phylink conversion?" - the answer is more
nuanced.
For context, the previous phylib-based implementation was unable to
describe the fixed-link speed as 2500, because the software PHY
implementation is limited to 1G. However, improperly describing the link
as an sgmii fixed-link with speed = <1000> would have resulted in a
functional 2.5G speed, because there is no other difference than the
SerDes lane clock net frequency (3.125 GHz for 2500base-x) - all the
other higher-level settings are the same, and the SerDes lane frequency
is currently handled by the RCW.
But this hack cannot be extended towards a phylib PHY such as Aquantia
operating in OCSGMII, because the latter requires phy-mode = "2500base-x",
which the mEMAC driver did not support prior to the phylink conversion.
So I do not really consider this a regression, just completing support
for a missing feature.
The FMan mEMAC driver sets phylink's "default_an_inband" property to
true, making it as if the device tree node had the managed =
"in-band-status" property anyway. This default made sense for SGMII,
where it was added to avoid regressions, but for 2500base-x we learned
only recently how to enable in-band autoneg:
https://lore.kernel.org/netdev/20251122113433.141930-1-vladimir.oltean@nxp.com/
so the driver needs to opt out of this default in-band enabled
behaviour, and only enable in-band based on the device tree property.
Suggested-by: Russell King (Oracle) <linux@armlinux.org.uk>
Link: https://lore.kernel.org/netdev/aIyx0OLWGw5zKarX@shell.armlinux.org.uk/#t
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://patch.msgid.link/20251122115523.150260-1-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Implement the inband_caps() and config_inband() PHY driver methods, to
allow working with PCS devices that do not support or want in-band to be
used.
There is a complication due to existing logic from commit c76acfb7e1
("net: phy: dp83867: retrigger SGMII AN when link change") which might
re-enable what dp83867_config_inband() has disabled. So we need to
modify dp83867_link_change_notify() to use phy_modify_changed() when
temporarily disabling in-band autoneg. If the return code is 0, it means
the original in-band was disabled and we need to keep it disabled.
If the return code is 1, the original was enabled and we need to
re-enable it. If negative, there was an error, which was silent before,
and remains silent now.
dp83867_config_inband() and dp83867_link_change_notify() are serialized
by the phydev->lock.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://patch.msgid.link/20251122110427.133035-1-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add a test framework for YAML Netlink (YNL) tools, covering both CLI and
ethtool functionality. The framework includes:
1) cli: family listing, netdev, ethtool, rt-* families, and nlctrl
operations
2) ethtool: device info, statistics, ring/coalesce/pause parameters, and
feature gettings
The current YNL syntax is a bit obscure, and end users may not always know
how to use it. This test framework provides usage examples and also serves
as a regression test to catch potential breakages caused by future changes.
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Acked-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Link: https://patch.msgid.link/20251124022055.33389-1-liuhangbin@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The fix commit converted several IPv4 address attributes from binary
to u32, but forgot to specify byte-order: big-endian. Without this,
YNL tools display IPv4 addresses incorrectly due to host-endian
interpretation.
Add the missing byte-order: big-endian to all affected u32 IPv4
address fields to ensure correct parsing and display.
Fixes: 1064d521d1 ("netlink: specs: support ipv4-or-v6 for dual-stack fields")
Reported-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Reviewed-by: Asbjørn Sloth Tønnesen <ast@fiberby.net>
Link: https://patch.msgid.link/20251125112048.37631-1-liuhangbin@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Breno Leitao says:
====================
net: intel: migrate to .get_rx_ring_count() ethtool callback
This series migrates Intel network drivers to use the new .get_rx_ring_count()
ethtool callback introduced in commit 84eaf4359c ("net: ethtool: add
get_rx_ring_count callback to optimize RX ring queries").
The new callback simplifies the .get_rxnfc() implementation by removing
ETHTOOL_GRXRINGS handling and moving it to a dedicated callback. This provides
a cleaner separation of concerns and aligns these drivers with the modern
ethtool API.
The series updates the following Intel drivers:
- idpf
- igb
- igc
- ixgbevf
- fm10k
====================
Link: https://patch.msgid.link/20251125-gxring_intel-v2-0-f55cd022d28b@debian.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Commit 84eaf4359c ("net: ethtool: add get_rx_ring_count callback to
optimize RX ring queries") added specific support for GRXRINGS callback,
simplifying .get_rxnfc.
Remove the handling of GRXRINGS in .get_rxnfc() by moving it to the new
.get_rx_ring_count().
This simplifies the RX ring count retrieval and aligns fm10k with the new
ethtool API for querying RX ring parameters.
Signed-off-by: Breno Leitao <leitao@debian.org>
Signed-off-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Link: https://patch.msgid.link/20251125-gxring_intel-v2-8-f55cd022d28b@debian.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Commit 84eaf4359c ("net: ethtool: add get_rx_ring_count callback to
optimize RX ring queries") added specific support for GRXRINGS callback,
simplifying .get_rxnfc.
Remove the handling of GRXRINGS in .get_rxnfc() by moving it to the new
.get_rx_ring_count().
This simplifies the RX ring count retrieval and aligns ixgbevf with the new
ethtool API for querying RX ring parameters.
Signed-off-by: Breno Leitao <leitao@debian.org>
Signed-off-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Link: https://patch.msgid.link/20251125-gxring_intel-v2-7-f55cd022d28b@debian.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Commit 84eaf4359c ("net: ethtool: add get_rx_ring_count callback to
optimize RX ring queries") added specific support for GRXRINGS callback,
simplifying .get_rxnfc.
Remove the handling of GRXRINGS in .get_rxnfc() by moving it to the new
.get_rx_ring_count().
This simplifies the RX ring count retrieval and aligns igc with the new
ethtool API for querying RX ring parameters.
Signed-off-by: Breno Leitao <leitao@debian.org>
Signed-off-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Link: https://patch.msgid.link/20251125-gxring_intel-v2-6-f55cd022d28b@debian.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Commit 84eaf4359c ("net: ethtool: add get_rx_ring_count callback to
optimize RX ring queries") added specific support for GRXRINGS callback,
simplifying .get_rxnfc.
Remove the handling of GRXRINGS in .get_rxnfc() by moving it to the new
.get_rx_ring_count().
This simplifies the RX ring count retrieval and aligns igb with the new
ethtool API for querying RX ring parameters.
Signed-off-by: Breno Leitao <leitao@debian.org>
Signed-off-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Link: https://patch.msgid.link/20251125-gxring_intel-v2-5-f55cd022d28b@debian.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Commit 84eaf4359c ("net: ethtool: add get_rx_ring_count callback to
optimize RX ring queries") added specific support for GRXRINGS callback,
simplifying .get_rxnfc.
Remove the handling of GRXRINGS in .get_rxnfc() by moving it to the new
.get_rx_ring_count().
This simplifies the RX ring count retrieval and aligns idpf with the new
ethtool API for querying RX ring parameters.
I was not totally convinced I needed to have the lock, but, I decided to
be on the safe side and get the exact same behaviour it was before.
Signed-off-by: Breno Leitao <leitao@debian.org>
Signed-off-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Link: https://patch.msgid.link/20251125-gxring_intel-v2-4-f55cd022d28b@debian.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Commit 84eaf4359c ("net: ethtool: add get_rx_ring_count callback to
optimize RX ring queries") added specific support for GRXRINGS callback,
simplifying .get_rxnfc.
Remove the handling of GRXRINGS in .get_rxnfc() by moving it to the new
.get_rx_ring_count().
This simplifies the RX ring count retrieval and aligns ice with the new
ethtool API for querying RX ring parameters.
Signed-off-by: Breno Leitao <leitao@debian.org>
Signed-off-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Link: https://patch.msgid.link/20251125-gxring_intel-v2-3-f55cd022d28b@debian.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Commit 84eaf4359c ("net: ethtool: add get_rx_ring_count callback to
optimize RX ring queries") added specific support for GRXRINGS callback,
simplifying .get_rxnfc.
Remove the handling of GRXRINGS in .get_rxnfc() by moving it to the new
.get_rx_ring_count().
This simplifies the RX ring count retrieval and aligns iavf with the new
ethtool API for querying RX ring parameters.
Signed-off-by: Breno Leitao <leitao@debian.org>
Signed-off-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Link: https://patch.msgid.link/20251125-gxring_intel-v2-2-f55cd022d28b@debian.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Commit 84eaf4359c ("net: ethtool: add get_rx_ring_count callback to
optimize RX ring queries") added specific support for GRXRINGS callback,
simplifying .get_rxnfc.
Remove the handling of GRXRINGS in .get_rxnfc() by moving it to the new
.get_rx_ring_count().
This simplifies the RX ring count retrieval and aligns i40e with the new
ethtool API for querying RX ring parameters.
Signed-off-by: Breno Leitao <leitao@debian.org>
Signed-off-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Link: https://patch.msgid.link/20251125-gxring_intel-v2-1-f55cd022d28b@debian.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Yao Zi says:
====================
Unify platform suspend/resume routines for PCI DWMAC glue
There are currently three PCI-based DWMAC glue drivers in tree,
stmmac_pci.c, dwmac-intel.c, and dwmac-loongson.c. Both stmmac_pci.c and
dwmac-intel.c implements the same and duplicated platform suspend/resume
routines.
This series introduces a new PCI helper library, stmmac_libpci.c,
providing a pair of helpers, stmmac_pci_plat_{suspend,resume}, and
replaces the driver-specific implementation with the helpers to reduce
code duplication. The helper will also simplify the Motorcomm DWMAC glue
driver which I'm working on.
The glue driver for Intel controllers isn't covered by the series, since
its suspend routine doesn't call pci_disable_device() and thus is a
little different from the new generic helpers.
I only have Loongson hardware on hand, thus the series is only tested on
Loongson 3A5000 machine. I could confirm the controller works after
resume, and WoL works as expected. This shouldn't break stmmac_pci.c,
either, since the new helpers have the exactly same code as the old
driver-specific suspend/resume hooks.
====================
Link: https://patch.msgid.link/20251124160417.51514-1-ziyao@disroot.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Convert STMMAC PCI glue driver to use the generic platform
suspend/resume routines for PCI controllers, instead of implementing its
own one.
Signed-off-by: Yao Zi <ziyao@disroot.org>
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Yanteng Si <siyanteng@cqsoftware.com.cn>
Link: https://patch.msgid.link/20251124160417.51514-4-ziyao@disroot.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Convert glue driver for Loongson DWMAC controller to use the generic
platform suspend/resume routines for PCI controllers, instead of
implementing its own one.
Signed-off-by: Yao Zi <ziyao@disroot.org>
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Acked-by: Yanteng Si <siyanteng@cqsoftware.com.cn>
Link: https://patch.msgid.link/20251124160417.51514-3-ziyao@disroot.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Most glue driver for PCI-based DWMAC controllers utilize similar
platform suspend/resume routines. Add a generic implementation to reduce
duplicated code.
Signed-off-by: Yao Zi <ziyao@disroot.org>
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Yanteng Si <siyanteng@cqsoftware.com.cn>
Link: https://patch.msgid.link/20251124160417.51514-2-ziyao@disroot.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Vadim Fedorenko says:
====================
add hwtstamp_get callback to phy drivers
PHY drivers are able to configure HW time stamping and are not able to
report configuration back to user space. Add callback to report
configuration like it's done for net_device and add implementation to
the drivers.
====================
Link: https://patch.msgid.link/20251124181151.277256-1-vadim.fedorenko@linux.dev
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The driver partially stores HW timestamping configuration, but missing
pieces can be read from HW. Add callback to report configuration.
Reviewed-by: Kory Maincent <kory.maincent@bootlin.com>
Signed-off-by: Vadim Fedorenko <vadim.fedorenko@linux.dev>
Link: https://patch.msgid.link/20251124181151.277256-8-vadim.fedorenko@linux.dev
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The driver stores HW timestamping configuration and can technically
report it. Add callback to do it.
Reviewed-by: Kory Maincent <kory.maincent@bootlin.com>
Signed-off-by: Vadim Fedorenko <vadim.fedorenko@linux.dev>
Link: https://patch.msgid.link/20251124181151.277256-7-vadim.fedorenko@linux.dev
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The driver stores HW configuration and can technically report it.
Add callback to do it.
Reviewed-by: Kory Maincent <kory.maincent@bootlin.com>
Signed-off-by: Vadim Fedorenko <vadim.fedorenko@linux.dev>
Link: https://patch.msgid.link/20251124181151.277256-6-vadim.fedorenko@linux.dev
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The driver stores configuration of TX timestamping and can technically
report it. Patch RX timestamp configuration storage to be more precise
on reporting and add callback to actually report it.
Reviewed-by: Kory Maincent <kory.maincent@bootlin.com>
Signed-off-by: Vadim Fedorenko <vadim.fedorenko@linux.dev>
Link: https://patch.msgid.link/20251124181151.277256-5-vadim.fedorenko@linux.dev
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The driver stores configuration information and can technically report
it. Implement hwtstamp_get callback to report the configuration.
Reviewed-by: Kory Maincent <kory.maincent@bootlin.com>
Signed-off-by: Vadim Fedorenko <vadim.fedorenko@linux.dev>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Link: https://patch.msgid.link/20251124181151.277256-4-vadim.fedorenko@linux.dev
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
PHY devices had lack of hwtstamp_get callback even though most of them
are tracking configuration info. Introduce new call back to
mii_timestamper.
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Kory Maincent <kory.maincent@bootlin.com>
Signed-off-by: Vadim Fedorenko <vadim.fedorenko@linux.dev>
Link: https://patch.msgid.link/20251124181151.277256-3-vadim.fedorenko@linux.dev
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
PHY devices has hwtstamp callback which actually performs set operation.
Rename it to better reflect the action.
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Kory Maincent <kory.maincent@bootlin.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Vadim Fedorenko <vadim.fedorenko@linux.dev>
Link: https://patch.msgid.link/20251124181151.277256-2-vadim.fedorenko@linux.dev
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
char variable in 'so_txtime.c' & 'txtimestamp.c' were left uninitilized
when switch default case taken. which raises following warning.
txtimestamp.c:240:2: warning: variable 'tsname' is used uninitialized
whenever switch default is taken [-Wsometimes-uninitialized]
so_txtime.c:210:3: warning: variable 'reason' is used uninitialized
whenever switch default is taken [-Wsometimes-uninitialized]
initializing these variables to NULL to fix this.
Signed-off-by: Ankit Khushwaha <ankitkhushwaha.linux@gmail.com>
Link: https://patch.msgid.link/20251125165302.20079-1-ankitkhushwaha.linux@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The error case in fbnic_alloc_napi_vectors defaulted to returning
ENOMEM. This can mask the true error case, causing confusion.
Signed-off-by: Dimitri Daskalakis <dimitri.daskalakis1@gmail.com>
Link: https://patch.msgid.link/20251124200518.1848029-1-dimitri.daskalakis1@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
so_peek_off.c is reported to be flaky on NIPA:
# # so_peek_off.c:149:two_chunks_overlap_blocking:Expected -1 (-1) != bytes (-1)
# # two_chunks_overlap_blocking: Test terminated by assertion
# # FAIL so_peek_off.stream.two_chunks_overlap_blocking
The test fork()s a child process to send() data after 1ms to
wake up the parent process being blocked (up to 3ms) on recv().
But, from the log, the parent woke up after 3ms timeout, so it
could be too short when the host is overloaded.
Let's extend it to 5s.
Reported-by: Jakub Kicinski <kuba@kernel.org>
Closes: https://lore.kernel.org/netdev/20251124070722.1e828c53@kernel.org/
Signed-off-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20251124212805.486235-3-kuniyu@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Somehow AF_UNIX tests have reused ../.gitignore,
but now NIPA warns about it.
Let's create .gitignore under af_unix/.
Signed-off-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20251124212805.486235-2-kuniyu@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This patch refines and strengthens the statistics collection of TX queue
wake/stop events introduced by commit c39add9b24 ("virtio_net: Add TX
stopped and wake counters").
Previously, the driver only recorded partial wake/stop statistics
for TX queues. Some wake events triggered by 'skb_xmit_done()' or resume
operations were not counted, which made the per-queue metrics incomplete.
Signed-off-by: Liming Wu <liming.wu@jaguarmicro.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Link: https://patch.msgid.link/20251120015320.1418-1-liming.wu@jaguarmicro.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Eric Dumazet says:
====================
tcp: provide better locality for retransmit timer
TCP stack uses three timers per flow, currently spread this way:
- sk->sk_timer : keepalive timer
- icsk->icsk_retransmit_timer : retransmit timer
- icsk->icsk_delack_timer : delayed ack timer
This series moves the retransmit timer to sk->sk_timer location,
to increase data locality in TX paths.
keepalive timers are not often used, this change should be neutral for them.
After the series we have following fields:
- sk->tcp_retransmit_timer : retransmit timer, in sock_write_tx group
- icsk->icsk_delack_timer : delayed ack timer
- icsk->icsk_keepalive_timer : keepalive timer
Moving icsk_delack_timer in a beter location would also be welcomed.
====================
Link: https://patch.msgid.link/20251124175013.1473655-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Now sk->sk_timer is no longer used by TCP keepalive, we can use
its storage for TCP and MPTCP retransmit timers for better
cache locality.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20251124175013.1473655-5-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
sk->sk_timer has been used for TCP keepalives.
Keepalive timers are not in fast path, we want to use sk->sk_timer
storage for retransmit timers, for better cache locality.
Create icsk->icsk_keepalive_timer and change keepalive
code to no longer use sk->sk_timer.
Added space is reclaimed in the following patch.
This includes changes to MPTCP, which was also using sk_timer.
Alias icsk->mptcp_tout_timer and icsk->icsk_keepalive_timer
for inet_sk_diag_fill() sake.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20251124175013.1473655-4-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
These two fields are mostly read in TCP tx path, move them
in an more appropriate group for better cache locality.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20251124175013.1473655-3-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In preparation of sk->tcp_timeout_timer introduction,
rename icsk_timeout() helper and change its argument to plain
'const struct sock *sk'.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20251124175013.1473655-2-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Since the tagged commit, ice stopped respecting Rx buffer length
passed from VFs.
At that point, the buffer length was hardcoded in ice, so VFs still
worked up to some point (until, for example, a VF wanted an MTU
larger than its PF).
The next commit 93f53db9f9 ("ice: switch to Page Pool"), broke
Rx on VFs completely since ice started accounting per-queue buffer
lengths again, but now VF queues always had their length zeroed, as
ice was already ignoring what iavf was passing to it.
Restore the line that initializes the buffer length on VF queues
basing on the virtchnl messages.
Fixes: 3a4f419f75 ("ice: drop page splitting and recycling")
Reported-by: Jakub Slepecki <jakub.slepecki@intel.com>
Reviewed-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Tested-by: Jakub Slepecki <jakub.slepecki@intel.com>
Link: https://patch.msgid.link/20251124170735.3077425-1-aleksander.lobakin@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-Wflex-array-member-not-at-end was introduced in GCC-14, and we are
getting ready to enable it, globally.
Use the `DEFINE_RAW_FLEX()` helper for on-stack definitions of
a flexible structure where the size of the flexible-array member
is known at compile-time, and refactor the rest of the code,
accordingly.
So, with these changes, fix the following warning:
drivers/net/ethernet/chelsio/inline_crypto/chtls/chtls_io.c:163:36: warning: structure containing a flexible array member is not at the end of another structure [-Wflex-array-member-not-at-end]
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Link: https://patch.msgid.link/aSQocKoJGkN0wzEj@kspp
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Asbjørn Sloth Tønnesen says:
====================
tools: ynl-gen: regeneration comment + function prefix
It looks like these two patches are the last ones needed
for YNL, before the WireGuard patches can go in.
These patches was both requested by Jason, during review
of the WireGuard YNL conversion patchset[1].
====================
Link: https://patch.msgid.link/20251120174429.390574-1-ast@fiberby.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add a comment on regeneration to the generated files.
The comment is placed after the YNL-GEN line[1], as to not interfere
with ynl-regen.sh's detection logic.
[1] and after the optional YNL-ARG line.
Link: https://lore.kernel.org/r/aR5m174O7pklKrMR@zx2c4.com/
Suggested-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Asbjørn Sloth Tønnesen <ast@fiberby.net>
Acked-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20251120174429.390574-3-ast@fiberby.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This patch adds a new CLI argument for overriding the default
function prefix, as used for naming the doit/dumpit functions
in the generated kernel code.
When not specified the default "$(FAMILY)-nl" is used.
This can also be specified persistently in generated files:
/* YNL-ARG --function-prefix wg */
In the above example it causes the following changes:
wireguard_nl_get_device_dumpit() -> wg_get_device_dumpit()
wireguard_nl_get_device_doit() -> wg_get_device_doit()
The variable name fn_prefix, was chosen as it relates to op_prefix
which is used to prefix the UAPI commands enum entries.
Link: https://lore.kernel.org/r/aRvWzC8qz3iXDAb3@zx2c4.com/
Suggested-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Asbjørn Sloth Tønnesen <ast@fiberby.net>
Link: https://patch.msgid.link/20251120174429.390574-2-ast@fiberby.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Andy Shevchenko says:
====================
ptp: ocp: A fix and refactoring
Here is the fix for incorrect use of %ptT with the associated
refactoring and additional cleanups.
Note, %ptS, which is introduced in another series that is already
applied to PRINTK tree, doesn't fit here, that's why this fix
is separated from that series.
====================
Link: https://patch.msgid.link/20251124084816.205035-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The META's PCI vendor ID is listed already in the pci_ids.h.
Reuse it here.
Reviewed-by: Vadim Fedorenko <vadim.fedorenko@linux.dev>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://patch.msgid.link/20251124084816.205035-5-andriy.shevchenko@linux.intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The while (i--) is a standard pattern for the cleaning up loops.
Apply this pattern where it makes sense in the driver.
Reviewed-by: Vadim Fedorenko <vadim.fedorenko@linux.dev>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://patch.msgid.link/20251124084816.205035-4-andriy.shevchenko@linux.intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
It's a common practice to make resource release functions be NULL-aware.
Make ptp_ocp_unregister_ext() NULL-aware.
Reviewed-by: Vadim Fedorenko <vadim.fedorenko@linux.dev>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://patch.msgid.link/20251124084816.205035-3-andriy.shevchenko@linux.intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Refactor signal_show() to avoid sequential calls to sysfs_emit*()
and use the same pattern to get the index of a signal as it's done
in signal_store().
While at it, fix wrong use of %ptT against struct timespec64.
It's kinda lucky that it worked just because the first member
there 64-bit and it's of time64_t type. Now with %ptS it may
be used correctly.
Reviewed-by: Vadim Fedorenko <vadim.fedorenko@linux.dev>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://patch.msgid.link/20251124084816.205035-2-andriy.shevchenko@linux.intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
