- Drop unused PCIe Message routing and code definitions (Hans Zhang)
- Use standard PCIe config register definitions instead of
rockchip-specific redefinitions (Geraldo Nascimento)
- Set Target Link Speed to 5.0 GT/s before retraining so we have a chance
to train at a higher speed (Geraldo Nascimento)
* pci/controller/rockchip:
PCI: rockchip: Set Target Link Speed to 5.0 GT/s before retraining
PCI: rockchip: Use standard PCIe definitions
PCI: rockchip: Remove redundant PCIe message routing definitions
- Export DWC MSI controller related APIs for use by upcoming DWC-based ECAM
implementation (Mayank Rana)
- Rename gen_pci_init() to pci_host_common_ecam_create() and export for use
by controller drivers (Mayank Rana)
- Add DT binding and driver support for SA8255p, which supports ECAM for
Configuration Space access (Mayank Rana)
- Update DT binding and driver to describe PHYs and per-Root Port resets in
a Root Port stanza and deprecate describing them in the host bridge; this
makes it possible to support multiple Root Ports in the future (Krishna
Chaitanya Chundru)
* pci/controller/qcom:
PCI: qcom: Add support for parsing the new Root Port binding
dt-bindings: PCI: qcom: Move PHY & reset GPIO to Root Port node
PCI: qcom: Add support for Qualcomm SA8255p based PCIe Root Complex
dt-bindings: PCI: qcom,pcie-sa8255p: Document ECAM compliant PCIe root complex
PCI: host-generic: Rename and export gen_pci_init() for PCIe controller drivers
PCI: dwc: Export DWC MSI controller related APIs
- Use devm_add_action_or_reset() when adding port->clk devm cleanup action
so we don't have to explicitly call clk_put() (Salah Triki)
* pci/controller/mvebu:
PCI: mvebu: Use devm_add_action_or_reset() instead of devm_add_action()
- Add IMX8MQ_EP third 64-bit BAR in epc_features (Richard Zhu)
- Add IMX8MM_EP and IMX8MP_EP fixed 256-byte BAR 4 in epc_features (Richard
Zhu)
- Factor imx_pcie_add_lut_by_rid() out of imx_pcie_enable_device() for use
by LUT configuration (Frank Li)
- Configure LUT for MSI/IOMMU in Endpoint mode so Root Complex can trigger
doorbel on Endpoint (Frank Li)
- Remove apps_reset (LTSSM_EN) from imx_pcie_{assert,deassert}_core_reset(),
which fixes a hotplug regression on i.MX8MM (Richard Zhu)
- Delay Endpoint link start until configfs 'start' written (Richard Zhu)
* pci/controller/imx6:
PCI: imx6: Delay link start until configfs 'start' written
PCI: imx6: Remove apps_reset toggling from imx_pcie_{assert/deassert}_core_reset
PCI: imx6: Add LUT configuration for MSI/IOMMU in Endpoint mode
PCI: imx6: Add helper function imx_pcie_add_lut_by_rid()
PCI: imx6: Add IMX8MM_EP and IMX8MP_EP fixed 256-byte BAR 4 in epc_features
PCI: imx6: Add IMX8MQ_EP third 64-bit BAR in epc_features
- Prevent race between link training and register update via DBI by
inhibiting link training after hot reset and link down (Wilfred Mallawa)
* pci/controller/dw-rockchip:
PCI: dw-rockchip: Delay link training after hot reset in EP mode
- Use PCIe Message routing types from the PCI core rather than defining
private ones (Hans Zhang)
* pci/controller/cadence:
PCI: cadence: Replace private message routing enums with PCI core definitions
- Add optional DT 'num-lanes' property and if present, use it to override
the Maximum Link Width advertised in Link Capabilities (Jim Quinlan)
* pci/controller/brcmstb:
PCI: brcmstb: Replace open coded value with PCIE_T_RRS_READY_MS
MAINTAINERS: Drop Nicolas from maintaining pcie-brcmstb
PCI: brcmstb: Set MLW based on "num-lanes" DT property if present
dt-bindings: PCI: brcm,stb-pcie: Add num-lanes property
- Rename PCIE_RESET_CONFIG_DEVICE_WAIT_MS to PCIE_RESET_CONFIG_WAIT_MS (the
required delay before sending config requests after a reset) (Niklas
Cassel)
- PCIE_T_RRS_READY_MS and PCIE_RESET_CONFIG_WAIT_MS were two names for the
same delay; replace PCIE_T_RRS_READY_MS with PCIE_RESET_CONFIG_WAIT_MS
and remove PCIE_T_RRS_READY_MS (Niklas Cassel)
- Add required PCIE_RESET_CONFIG_WAIT_MS delay after Link up IRQ to
dw-rockchip, qcom (Niklas Cassel)
- Add required PCIE_RESET_CONFIG_WAIT_MS after waiting for Link up on
Ports that support > 5.0 GT/s in dwc core (Niklas Cassel)
- Move LINK_WAIT_SLEEP_MS and LINK_WAIT_MAX_RETRIES to pci.h and prefix
with 'PCIE_' for potential sharing across drivers (Niklas Cassel)
* pci/controller/linkup-fix:
PCI: Move link up wait time and max retries macros to pci.h
PCI: dwc: Ensure that dw_pcie_wait_for_link() waits 100 ms after link up
PCI: qcom: Wait PCIE_RESET_CONFIG_WAIT_MS after link-up IRQ
PCI: dw-rockchip: Wait PCIE_RESET_CONFIG_WAIT_MS after link-up IRQ
PCI: rockchip-host: Use macro PCIE_RESET_CONFIG_WAIT_MS
PCI: Rename PCIE_RESET_CONFIG_DEVICE_WAIT_MS to PCIE_RESET_CONFIG_WAIT_MS
- Use dev_fwnode() instead of of_fwnode_handle() to remove OF dependency
in altera (fixes an unused variable), designware-host, mediatek,
mediatek-gen3, mobiveil, plda, xilinx, xilinx-dma, xilinx-nwl (Jiri
Slaby, Arnd Bergmann)
- Convert aardvark, altera, brcmstb, designware-host, iproc, mediatek,
mediatek-gen3, mobiveil, plda, rcar-host, vmd, xilinx, xilinx-dma,
xilinx-nwl from using pci_msi_create_irq_domain() to using
msi_create_parent_irq_domain() instead; this makes the interrupt
controller per-PCI device, allows dynamic allocation of vectors after
initialization, and allows support of IMS (Nam Cao)
- Convert vmd to using lock guards to tidy the code (Nam Cao)
* pci/controller/msi-parent:
PCI: vmd: Switch to msi_create_parent_irq_domain()
PCI: vmd: Convert to lock guards
PCI: plda: Switch to msi_create_parent_irq_domain()
PCI: xilinx: Switch to msi_create_parent_irq_domain()
PCI: xilinx-nwl: Switch to msi_create_parent_irq_domain()
PCI: xilinx-xdma: Switch to msi_create_parent_irq_domain()
PCI: rcar-host: Switch to msi_create_parent_irq_domain()
PCI: mediatek: Switch to msi_create_parent_irq_domain()
PCI: mediatek-gen3: Switch to msi_create_parent_irq_domain()
PCI: iproc: Switch to msi_create_parent_irq_domain()
PCI: brcmstb: Switch to msi_create_parent_irq_domain()
PCI: altera-msi: Switch to msi_create_parent_irq_domain()
PCI: aardvark: Switch to msi_create_parent_irq_domain()
PCI: mobiveil: Switch to msi_create_parent_irq_domain()
PCI: dwc: Switch to msi_create_parent_irq_domain()
PCI: controller: Use dev_fwnode() instead of of_fwnode_handle()
- Return -ENOENT (not -1) if pci_epc_get_next_free_bar() fails (Jerome
Brunet)
- Align MW (memory window) naming with config names (Jerome Brunet)
- Allow BAR assignment via configfs so platforms have flexibility in
determining BAR usage (Jerome Brunet)
- Drop incorrect '__iomem' annotation on the return value of
pci_epf_alloc_space(); this also fixes an sparse warning (Manivannan
Sadhasivam)
* pci/endpoint/epf-vntb:
PCI: endpoint: pci-epf-vntb: Fix the incorrect usage of __iomem attribute
PCI: endpoint: pci-epf-vntb: Allow BAR assignment via configfs
PCI: endpoint: pci-epf-vntb: Align MW naming with config names
PCI: endpoint: pci-epf-vntb: Return -ENOENT if pci_epc_get_next_free_bar() fails
- Add RC-to-EP doorbell support using platform MSI controller (Frank Li)
- Check for MSI parent and mutability since we currently don't support
mutable MSI controllers (Frank Li)
- Add pci_epf_align_inbound_addr() helper (Frank Li)
- Add a doorbell test (Frank Li)
* pci/endpoint/doorbell:
selftests: pci_endpoint: Add doorbell test case
misc: pci_endpoint_test: Add doorbell test case
PCI: endpoint: pci-epf-test: Add doorbell test support
PCI: endpoint: Add pci_epf_align_inbound_addr() helper for inbound address alignment
PCI: endpoint: pci-ep-msi: Add checks for MSI parent and mutability
PCI: endpoint: Add RC-to-EP doorbell support using platform MSI controller
- Fix configfs epf_group removal, which incorrectly did a list_del() on a
list head, not a list entry (Damien Le Moal)
* pci/endpoint/core:
PCI: endpoint: Fix configfs group removal on driver teardown
PCI: endpoint: Fix configfs group list head handling
- Restore VF resizable BAR state after reset (Michał Winiarski)
- Add pci_resource_num_to_vf_bar() and pci_resource_num_from_vf_bar() to
convert between VF BAR number and the dev->resource[] index (Michał
Winiarski)
- Allow IOV resources (VF BARs) to be resized (Michał Winiarski)
- Add pci_iov_vf_bar_set_size() so drivers can control VF BAR size (Michał
Winiarski)
* pci/resources:
PCI/IOV: Allow drivers to control VF BAR size
PCI/IOV: Check that VF BAR fits within the reservation
PCI/IOV: Allow IOV resources to be resized in pci_resize_resource()
PCI/IOV: Add pci_resource_num_to_vf_bar() to convert VF BAR number to/from IOV resource
PCI/IOV: Restore VF resizable BAR state after reset
- Add optional slot clock for cases where the PCIe host controller and the
slot are supplied by different clocks (Marek Vasut)
- Fix kerneldoc tag for private fields (Bartosz Golaszewski)
* pci/pwrctrl:
PCI/pwrctrl: Fix the kerneldoc tag for private fields
PCI/pwrctrl: Add optional slot clock for PCI slots
- Fix a Time-of-Check to Time-of-Use issue when testing driver_managed_dma
in the IOMMU probe path (Robin Murphy)
* pci/iommu:
PCI: Fix driver_managed_dma check
- Fix runtime PM ref imbalance on Hot-Plug Capable ports caused by
misinterpreting a config read failure after a device has been removed
(Lukas Wunner)
- Avoid creating a useless PCIe port service device for pciehp if the slot
is handled by the ACPI hotplug driver (Lukas Wunner)
- Ignore ACPI hotplug slots when calculating depth of pciehp hotplug ports
(Lukas Wunner)
- Simplify pci_bridge_d3_possible() and clarify comments (Lukas Wunner)
* pci/hotplug:
PCI: Move is_pciehp check out of pciehp_is_native()
PCI: pciehp: Use is_pciehp instead of is_hotplug_bridge
PCI/portdrv: Use is_pciehp instead of is_hotplug_bridge
PCI/ACPI: Fix runtime PM ref imbalance on Hot-Plug Capable ports
- Allow 'isolated PCI functions' (multi-function devices without a function
0) for LoongArch, similar to s390 and jailhouse (Huacai Chen)
- Mask out unrelated bits in PCIE_LNKCAP_SLS2SPEED() and
PCIE_LNKCTL2_TLS2SPEED(), which makes them more robust and fixes a
WARN_ON_ONCE() in pcie_set_target_speed() (Jiwei Sun)
- Read Link Control 2 again when retraining a link after a training failure
so we try to increase the link speed (Jiwei Sun)
- Allow built-in drivers, not just modular drivers, to use async initial
probing (Lukas Wunner)
- Support Immediate Readiness even on devices with no PM Capability (Sean
Christopherson)
* pci/enumeration:
PCI: Support Immediate Readiness on devices without PM capabilities
PCI: Allow built-in drivers to use async initial probing
PCI: Adjust the position of reading the Link Control 2 register
PCI: Fix link speed calculation on retrain failure
PCI: Extend isolated function probing to LoongArch
- Add pci_is_display() to check for "Display" base class and use it in
ALSA hda, vfio, vga_switcheroo, vt-d (Mario Limonciello)
* pci/boot-display:
ALSA: hda: Use pci_is_display()
iommu/vt-d: Use pci_is_display()
vga_switcheroo: Use pci_is_display()
vfio/pci: Use pci_is_display()
PCI: Add pci_is_display() to check if device is a display controller
- Change aspm_disabled and aspm_force from int to bool (Hans Zhang)
- Initialize val at declaration (Hans Zhang)
* pci/aspm:
PCI/ASPM: Consolidate variable declaration and initialization
PCI/ASPM: Use boolean type for aspm_disabled and aspm_force
- Change pcie_aer_disable from int to bool (Hans Zhang)
- Add message if AER interrupt occurs and we find more downstream devices
with AER errors logged than we can process (Akshay Jindal)
* pci/aer:
PCI/AER: Add message when AER_MAX_MULTI_ERR_DEVICES limit is hit
PCI/AER: Use bool for AER disable state tracking
Each PCIe controller on SA8775P includes a 'link_down' reset line in
hardware. This patch documents the reset in the device tree binding.
The 'link_down' reset is used to forcefully bring down the PCIe link
layer, which is useful in scenarios such as link recovery after errors,
power management transitions, and hotplug events. Including this reset
line improves robustness and provides finer control over PCIe controller
behavior.
As the 'link_down' reset was omitted in the initial submission, it is now
being documented. While this reset is not required for most of the block's
basic functionality, and device trees lacking it will continue to function
correctly in most cases, it is necessary to ensure maximum robustness when
shutting down or recovering the PCIe core. Therefore, its inclusion is
justified despite the minor ABI change.
Signed-off-by: Ziyue Zhang <ziyue.zhang@oss.qualcomm.com>
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Reviewed-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://patch.msgid.link/20250718081718.390790-3-ziyue.zhang@oss.qualcomm.com
This binding is already covered by fsl,mpc8xxx-pci.yaml schema. While
the MPC512x is mentioned here, its compatible strings aren't actually
documented and remain that way.
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Link: https://patch.msgid.link/20250710180843.2971667-1-robh@kernel.org
Convert the Marvell Armada 3700 PCIe binding to DT schema format.
The 'clocks' property was missing and has been added.
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Link: https://patch.msgid.link/20250710180811.2970846-1-robh@kernel.org
pci_bridge_d3_possible() seeks to forbid runtime power management on:
* Non Hot-Plug Capable PCIe ports which are nevertheless ACPI slots
(recognizable as: bridge->is_hotplug_bridge && !bridge->is_pciehp)
* Hot-Plug Capable PCIe ports for which platform firmware has not granted
PCIe Native Hot-Plug control to the operating system
(recognizable as: bridge->is_pciehp && !pciehp_is_native(bridge))
Somewhat confusingly, the check for is_hotplug_bridge is in
pci_bridge_d3_possible(), whereas the one for is_pciehp is in
pciehp_is_native().
For clarity, check is_pciehp directly in pci_bridge_d3_possible()
(and in the other caller of pciehp_is_native(), hotplug_is_native()).
Rephrase the code comment preceding these checks to no longer mention
"System Management Mode", which is an x86 term inappropriate in generic
PCI code. Likewise no longer mention "Thunderbolt on non-Macs", because
there is nothing Thunderbolt-specific about these checks. It used to be
the case that non-Macs relied on the platform for Thunderbolt tunnel
management and hotplug, but they've since moved to OS-native tunnel
management (as Macs always have), hence the code comment is no longer
accurate.
There is a subsequent check for is_hotplug_bridge further down in
pci_bridge_d3_possible(). Change the check to is_pciehp because any
ports matching "bridge->is_hotplug_bridge && !bridge->is_pciehp" are
already filtered out at the top of the function.
Do the same for another check in acpi_pci_bridge_d3(), which is called
from pci_bridge_d3_possible() via platform_pci_bridge_d3().
No functional change intended.
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Link: https://patch.msgid.link/18b2c2110ad0f27a34b189d793310b9c4f2f24a0.1752390102.git.lukas@wunner.de
The PCIe hotplug driver calculates the depth of a nested hotplug port by
looking at the is_hotplug_bridge flag. The depth is used as lockdep class
to tell hotplug ports apart.
The is_hotplug_bridge flag encompasses ACPI slots handled by the ACPI
hotplug driver, hence the calculated depth may be too high. Avoid by
checking the is_pciehp flag instead.
This glitch likely has no user-visible impact: ACPI slots typically only
exist at the Root Port level, not in nested hotplug hierarchies. Also,
CONFIG_LOCKDEP is usually only used by developers. So this is just for
the sake of correctness.
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Link: https://patch.msgid.link/59a097376a2bb493da9efd66fb196ae4b66f8a09.1752390102.git.lukas@wunner.de
The PCIe port driver erroneously creates a subdevice for hotplug on ACPI
slots which are handled by the ACPI hotplug driver.
Avoid by checking the is_pciehp flag instead of is_hotplug_bridge when
deciding whether to create a subdevice. The latter encompasses ACPI slots
whereas the former doesn't.
The superfluous subdevice has no real negative impact, it occupies memory
and interrupt resources but otherwise just sits there waiting for
interrupts from the slot that are never signaled.
Fixes: f841522283 ("PCI: Use cached copy of PCI_EXP_SLTCAP_HPC bit")
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Cc: stable@vger.kernel.org # v4.7+
Link: https://patch.msgid.link/40d5a5fe8d40595d505949c620a067fa110ee85e.1752390102.git.lukas@wunner.de
pci_bridge_d3_possible() is called from both pcie_portdrv_probe() and
pcie_portdrv_remove() to determine whether runtime power management shall
be enabled (on probe) or disabled (on remove) on a PCIe port.
The underlying assumption is that pci_bridge_d3_possible() always returns
the same value, else a runtime PM reference imbalance would occur. That
assumption is not given if the PCIe port is inaccessible on remove due to
hot-unplug: pci_bridge_d3_possible() calls pciehp_is_native(), which
accesses Config Space to determine whether the port is Hot-Plug Capable.
An inaccessible port returns "all ones", which is converted to "all
zeroes" by pcie_capability_read_dword(). Hence the port no longer seems
Hot-Plug Capable on remove even though it was on probe.
The resulting runtime PM ref imbalance causes warning messages such as:
pcieport 0000:02:04.0: Runtime PM usage count underflow!
Avoid the Config Space access (and thus the runtime PM ref imbalance) by
caching the Hot-Plug Capable bit in struct pci_dev.
The struct already contains an "is_hotplug_bridge" flag, which however is
not only set on Hot-Plug Capable PCIe ports, but also Conventional PCI
Hot-Plug bridges and ACPI slots. The flag identifies bridges which are
allocated additional MMIO and bus number resources to allow for hierarchy
expansion.
The kernel is somewhat sloppily using "is_hotplug_bridge" in a number of
places to identify Hot-Plug Capable PCIe ports, even though the flag
encompasses other devices. Subsequent commits replace these occurrences
with the new flag to clearly delineate Hot-Plug Capable PCIe ports from
other kinds of hotplug bridges.
Document the existing "is_hotplug_bridge" and the new "is_pciehp" flag
and document the (non-obvious) requirement that pci_bridge_d3_possible()
always returns the same value across the entire lifetime of a bridge,
including its hot-removal.
Fixes: 5352a44a56 ("PCI: pciehp: Make pciehp_is_native() stricter")
Reported-by: Laurent Bigonville <bigon@bigon.be>
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=220216
Reported-by: Mario Limonciello <mario.limonciello@amd.com>
Closes: https://lore.kernel.org/r/20250609020223.269407-3-superm1@kernel.org/
Link: https://lore.kernel.org/all/20250620025535.3425049-3-superm1@kernel.org/T/#u
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Rafael J. Wysocki <rafael@kernel.org>
Cc: stable@vger.kernel.org # v4.18+
Link: https://patch.msgid.link/fe5dcc3b2e62ee1df7905d746bde161eb1b3291c.1752390101.git.lukas@wunner.de
Add doorbell support with the help of three new registers:
PCIE_ENDPOINT_TEST_DB_BAR, PCIE_ENDPOINT_TEST_DB_ADDR, and
PCIE_ENDPOINT_TEST_DB_DATA.
The testcase works by triggering the doorbell in Endpoint by writing the
value from PCI_ENDPOINT_TEST_DB_DATA register to the address provided by
PCI_ENDPOINT_TEST_DB_OFFSET register of the BAR indicated by the
PCIE_ENDPOINT_TEST_DB_BAR register and waiting for the completion status
from the Endpoint.
Signed-off-by: Frank Li <Frank.Li@nxp.com>
[mani: removed one spurious change and reworded the commit message]
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Tested-by: Niklas Cassel <cassel@kernel.org>
Link: https://patch.msgid.link/20250710-ep-msi-v21-7-57683fc7fb25@nxp.com
Add doorbell support by allocating a dedicated BAR using the
pci_epf_alloc_doorbell() API and mapping the Endpoint MSI controller
message data address to it. The data to be written in the message address
is stored in the 'pci_epf_test_reg::doorbell_data' register. Finally, the
RC can trigger doorbell in the Endpoint by writing the content of
'doorbell_data' register to the offset specified in 'doorbell_offset' of
the 'doorbell_bar' BAR.
Triggering of the doorbell is detected by pci_epf_test_doorbell_handler(),
which is bound to the doorbell IRQ. On successful completion,
STATUS_DOORBELL_SUCCESS status is set in the above mentioned handler.
To avoid breaking compatibility between host and endpoint, add two new
commands: COMMAND_ENABLE_DOORBELL and COMMAND_DISABLE_DOORBELL.
The doorbell is allocated when COMMAND_ENABLE_DOORBELL command is called
and destroyed when COMMAND_DISABLE_DOORBELL is called.
This doorbell feature only works when both RC and EP drivers support it.
If one of them doesn't support the feature, the testcase will fail.
Signed-off-by: Frank Li <Frank.Li@nxp.com>
[mani: code cleanups and reworded commit message]
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Tested-by: Niklas Cassel <cassel@kernel.org>
Link: https://patch.msgid.link/20250710-ep-msi-v21-6-57683fc7fb25@nxp.com
Add pci_epf_align_inbound_addr() to align the inbound addresses according
to PCI BAR alignment requirements. The aligned base address and offset are
returned via 'base' and 'off' parameters.
Signed-off-by: Frank Li <Frank.Li@nxp.com>
[mani: reworded kernel-doc and commit message]
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Tested-by: Niklas Cassel <cassel@kernel.org>
Link: https://patch.msgid.link/20250710-ep-msi-v21-5-57683fc7fb25@nxp.com
Some MSI controllers can change address/data pair during the execution of
irq_chip::irq_set_affinity() callback. Since the current PCI Endpoint
framework cannot support mutable MSI controllers, call
irq_domain_is_msi_immutable() API to check if the controller is immutable
or not.
Also ensure that the MSI domain is a parent MSI domain so that it can
allocate address/data pairs.
Signed-off-by: Frank Li <Frank.Li@nxp.com>
[mani: reworded error message and commit message]
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Tested-by: Niklas Cassel <cassel@kernel.org>
Link: https://patch.msgid.link/20250710-ep-msi-v21-4-57683fc7fb25@nxp.com
Implement the doorbell feature by mapping the EP's MSI interrupt controller
message address to a dedicated BAR.
The EPF driver should pass the actual message data to be written to the
message address by the host through implementation-specific logic.
Signed-off-by: Frank Li <Frank.Li@nxp.com>
[mani: minor code cleanups and reworded commit message]
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
[bhelgaas: fix kernel-doc]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Tested-by: Niklas Cassel <cassel@kernel.org>
Link: https://patch.msgid.link/20250710-ep-msi-v21-3-57683fc7fb25@nxp.com
Convert lock/unlock pairs to lock guard and tidy up the code.
Signed-off-by: Nam Cao <namcao@linutronix.de>
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
[bhelgaas: rebase on dev_fwnode() conversion]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://patch.msgid.link/836cca37449c70922a2bea1fb13f37940a7a7132.1750858083.git.namcao@linutronix.de
Switch to msi_create_parent_irq_domain() from pci_msi_create_irq_domain()
which was using legacy MSI domain setup.
Signed-off-by: Nam Cao <namcao@linutronix.de>
[mani: reworded commit message]
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
[bhelgaas: rebase on dev_fwnode() conversion, drop fwnode local var]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://patch.msgid.link/1279fe6500a1d8135d8f5feb2f055df008746c88.1750858083.git.namcao@linutronix.de
Switch to msi_create_parent_irq_domain() from pci_msi_create_irq_domain()
which was using legacy MSI domain setup.
Signed-off-by: Nam Cao <namcao@linutronix.de>
[mani: reworded commit message]
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
[bhelgaas: rebase on dev_fwnode() conversion, drop fwnode local var]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://patch.msgid.link/b1353c797ce53714c22823de3bd2ae3d09fcd84f.1750858083.git.namcao@linutronix.de
Switch to msi_create_parent_irq_domain() from pci_msi_create_irq_domain()
which was using legacy MSI domain setup.
Signed-off-by: Nam Cao <namcao@linutronix.de>
[mani: reworded commit message]
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
[bhelgaas: rebase on dev_fwnode() conversion, drop fwnode local var]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://patch.msgid.link/5ac6e216bf2eaa438c8854baf2ff3e5cf0b2284f.1750858083.git.namcao@linutronix.de
Switch to msi_create_parent_irq_domain() from pci_msi_create_irq_domain()
which was using legacy MSI domain setup.
Signed-off-by: Nam Cao <namcao@linutronix.de>
[mani: reworded commit message]
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
[bhelgaas: rebase on dev_fwnode() conversion]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://patch.msgid.link/b4620dc1808f217a69d0ae50700ffa12ffd657eb.1750858083.git.namcao@linutronix.de
Switch to msi_create_parent_irq_domain() from pci_msi_create_irq_domain()
which was using legacy MSI domain setup.
Signed-off-by: Nam Cao <namcao@linutronix.de>
[mani: reworded commit message]
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
[bhelgaas: rebase on dev_fwnode() conversion, drop fwnode local var]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://patch.msgid.link/ab4005db0a829549be1f348f6c27be50a2118b5e.1750858083.git.namcao@linutronix.de
Switch to msi_create_parent_irq_domain() from pci_msi_create_irq_domain()
which was using legacy MSI domain setup.
Signed-off-by: Nam Cao <namcao@linutronix.de>
[mani: reworded commit message]
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
[bhelgaas: rebase on dev_fwnode() conversion, drop fwnode local var]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://patch.msgid.link/76f6e6ce6021607cd0fdfd79fef7d2eb69d9f361.1750858083.git.namcao@linutronix.de
Switch to msi_create_parent_irq_domain() from pci_msi_create_irq_domain()
which was using legacy MSI domain setup.
Signed-off-by: Nam Cao <namcao@linutronix.de>
[mani: reworded commit message & fixed merge conflict]
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
[bhelgaas: rebase on dev_fwnode() conversion]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://patch.msgid.link/bfbd2e375269071b69e1aa85e629ee4b7c99518f.1750858083.git.namcao@linutronix.de
Switch to msi_create_parent_irq_domain() from pci_msi_create_irq_domain()
which was using legacy MSI domain setup.
Signed-off-by: Nam Cao <namcao@linutronix.de>
[mani: reworded commit message & squashed the kdoc cleanup patch]
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
[bhelgaas: rebase on dev_fwnode() conversion]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Link: https://patch.msgid.link/53946d74caf1fd134a1820eac82c3cf64d48779f.1750858083.git.namcao@linutronix.de
Switch to msi_create_parent_irq_domain() from pci_msi_create_irq_domain()
which was using legacy MSI domain setup.
Signed-off-by: Nam Cao <namcao@linutronix.de>
[mani: reworded commit message]
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
[bhelgaas: rebase on dev_fwnode() conversion, drop fwnode local var]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Link: https://patch.msgid.link/fa72703e06c2ee2c7554082c7152913eb0dd294f.1750858083.git.namcao@linutronix.de
