The memory allocated for codec in videocodec_attach() is not freed in
one of the error paths, due to an incorrect goto label. Fix the label
to free it on error.
Fixes: 8f7cc5c0b0 ("media: staging: media: zoran: introduce zoran_i2c_init")
Cc: stable@vger.kernel.org
Signed-off-by: Abdun Nihaal <nihaal@cse.iitm.ac.in>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
em28xx_v4l2_open() reads dev->v4l2 without holding dev->lock,
creating a race with em28xx_v4l2_init()'s error path and
em28xx_v4l2_fini(), both of which free the em28xx_v4l2 struct
and set dev->v4l2 to NULL under dev->lock.
This race leads to two issues:
- use-after-free in v4l2_fh_init() when accessing vdev->ctrl_handler,
since the video_device is embedded in the freed em28xx_v4l2 struct.
- NULL pointer dereference in em28xx_resolution_set() when accessing
v4l2->norm, since dev->v4l2 has been set to NULL.
Fix this by moving the mutex_lock() before the dev->v4l2 read and
adding a NULL check for dev->v4l2 under the lock.
Reported-by: syzbot+c025d34b8eaa54c571b8@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=c025d34b8eaa54c571b8
Fixes: 8139a4d583 ("[media] em28xx: move v4l2 user counting fields from struct em28xx to struct v4l2")
Cc: stable@vger.kernel.org
Signed-off-by: Abhishek Kumar <abhishek_sts8@yahoo.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
In the event that the cec dev node is held open while the adapter is
disconnected the serio device will be cleaned up but the cec device won't
be. As the serio device is freed but the ping_eeprom_work is not canceled,
the next ping will still attempt to send, leading to a kernel oops.
This patch both cancels the ping_eeprom_work in the serio cleanup as well
as checking to make sure the serio is still present before attempting to
write to it. Note that while the added serio = NULL line looks similar to
one that was removed in commit 024e01dead ("media: pulse8-cec: fix
duplicate free at disconnect or probe error"), it notably happens before
calling cec_unregister_adapter, and as such shouldn't lead to the
user-after-free that removing it fixed.
Signed-off-by: Vicki Pfau <vi@endrift.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Driver core holds a reference to the USB interface and its parent USB
device while the interface is bound to a driver and there is no need to
take additional references unless the structures are needed after
disconnect.
Drop the redundant device reference to reduce cargo culting, make it
easier to spot drivers where an extra reference is needed, and reduce
the risk of memory leaks when drivers fail to release it.
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Driver core holds a reference to the USB interface and its parent USB
device while the interface is bound to a driver and there is no need to
take additional references unless the structures are needed after
disconnect.
Drop the redundant device reference to reduce cargo culting, make it
easier to spot drivers where an extra reference is needed, and reduce
the risk of memory leaks when drivers fail to release it.
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Driver core holds a reference to the USB interface and its parent USB
device while the interface is bound to a driver and there is no need to
take additional references unless the structures are needed after
disconnect.
Drop the redundant device reference to reduce cargo culting, make it
easier to spot drivers where an extra reference is needed, and reduce
the risk of memory leaks when drivers fail to release it.
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
syzbot reported a general protection fault in vidtv_psi_desc_assign [1].
vidtv_psi_pmt_stream_init() can return NULL on memory allocation
failure, but vidtv_channel_pmt_match_sections() does not check for
this. When tail is NULL, the subsequent call to
vidtv_psi_desc_assign(&tail->descriptor, desc) dereferences a NULL
pointer offset, causing a general protection fault.
Add a NULL check after vidtv_psi_pmt_stream_init(). On failure, clean
up the already-allocated stream chain and return.
[1]
Oops: general protection fault, probably for non-canonical address 0xdffffc0000000000: 0000 [#1] SMP KASAN PTI
KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007]
RIP: 0010:vidtv_psi_desc_assign+0x24/0x90 drivers/media/test-drivers/vidtv/vidtv_psi.c:629
Call Trace:
<TASK>
vidtv_channel_pmt_match_sections drivers/media/test-drivers/vidtv/vidtv_channel.c:349 [inline]
vidtv_channel_si_init+0x1445/0x1a50 drivers/media/test-drivers/vidtv/vidtv_channel.c:479
vidtv_mux_init+0x526/0xbe0 drivers/media/test-drivers/vidtv/vidtv_mux.c:519
vidtv_start_streaming drivers/media/test-drivers/vidtv/vidtv_bridge.c:194 [inline]
vidtv_start_feed+0x33e/0x4d0 drivers/media/test-drivers/vidtv/vidtv_bridge.c:239
Fixes: f90cf6079b ("media: vidtv: add a bridge driver")
Cc: stable@vger.kernel.org
Reported-by: syzbot+1f5bcc7c919ec578777a@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=1f5bcc7c919ec578777a
Signed-off-by: Ruslan Valiyev <linuxoid@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
syzbot reported a memory leak in vidtv_psi_service_desc_init [1].
When vidtv_start_streaming() fails inside vidtv_start_feed(), the
nfeeds counter is left incremented even though no feed was actually
started. This corrupts the driver state: subsequent start_feed calls
see nfeeds > 1 and skip starting the mux, while stop_feed calls
eventually try to stop a non-existent stream.
This state corruption can also lead to memory leaks, since the mux
and channel resources may be partially allocated during a failed
start_streaming but never cleaned up, as the stop path finds
dvb->streaming == false and returns early.
Fix by decrementing nfeeds back when start_streaming fails, keeping
the counter in sync with the actual number of active feeds.
[1]
BUG: memory leak
unreferenced object 0xffff888145b50820 (size 32):
comm "syz.0.17", pid 6068, jiffies 4294944486
backtrace (crc 90a0c7d4):
vidtv_psi_service_desc_init+0x74/0x1b0 drivers/media/test-drivers/vidtv/vidtv_psi.c:288
vidtv_channel_s302m_init+0xb1/0x2a0 drivers/media/test-drivers/vidtv/vidtv_channel.c:83
vidtv_channels_init+0x1b/0x40 drivers/media/test-drivers/vidtv/vidtv_channel.c:524
vidtv_mux_init+0x516/0xbe0 drivers/media/test-drivers/vidtv/vidtv_mux.c:518
vidtv_start_streaming drivers/media/test-drivers/vidtv/vidtv_bridge.c:194 [inline]
vidtv_start_feed+0x33e/0x4d0 drivers/media/test-drivers/vidtv/vidtv_bridge.c:239
Fixes: f90cf6079b ("media: vidtv: add a bridge driver")
Cc: stable@vger.kernel.org
Reported-by: syzbot+639ebc6ec75e96674741@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=639ebc6ec75e96674741
Signed-off-by: Ruslan Valiyev <linuxoid@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Ahead of introducing I2C-adapter-specific printk() helpers, preemptively
avoid a conflict with the upcoming i2c_dbg() and rename the local macro
in the saa7134 driver to saa7134_i2c_dbg().
Suggested-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
Acked-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
vidtv_ts_null_write_into() and vidtv_ts_pcr_write_into() take their
argument structs by value, causing MSAN to report uninit-value warnings.
While only vidtv_ts_null_write_into() has triggered a report so far,
both functions share the same issue.
Fix by passing both structs by const pointer instead, avoiding the
stack copy of the struct along with its MSAN shadow and origin metadata.
The functions do not modify the structs, which is enforced by the const
qualifier.
Fixes: f90cf6079b ("media: vidtv: add a bridge driver")
Cc: stable@vger.kernel.org
Reported-by: syzbot+96f901260a0b2d29cd1a@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=96f901260a0b2d29cd1a
Tested-by: syzbot+96f901260a0b2d29cd1a@syzkaller.appspotmail.com
Suggested-by: Yihan Ding <dingyihan@uniontech.com>
Signed-off-by: Abd-Alrhman Masalkhi <abd.masalkhi@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
In dib8000_set_dds(), 1 << 26 (67108864) divided by e.g. 1 apparently can't
fit into 16-bit variable unit_khz_dds_val, being truncated to 0; this will
cause division by 0 while calling dprintk() with debugging enabled (via the
module parameter). Use s32 instead of s16 to declare the variable, getting
rid of the cast to u16 in the *else* branch as well...
Found by Linux Verification Center (linuxtesting.org) with the Svace static
analysis tool.
Fixes: 173a64cb3f ("[media] dib8000: enhancement")
Cc: stable@vger.kernel.org
Signed-off-by: Sergey Shtylyov <s.shtylyov@auroraos.dev>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
media: cx25821-alsa: replace BUG_ON() with WARN_ON()
Avoid crashing the kernel for a recoverable condition
by replacing BUG_ON() with WARN_ON().
Signed-off-by: Atharv Dubey <atharvd440@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
In fimc_runtime_resume(), the return value of
clk_enable(fimc->clock[CLK_GATE]) was not checked. If enabling the clock
fails, subsequent register accesses (fimc_hw_reset() and capture/m2m
resume) may trigger a bus error or undefined behavior.
Fix this by checking the return value. If clk_enable() fails, return the
error immediately, preventing unsafe hardware access.
Signed-off-by: Zhaoyang Yu <2426767509@qq.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
The v4l2_device is registered during probe but was not being unregistered
during remove. Add the missing v4l2_device_unregister() call to properly
clean up resources.
Fixes: fc2873aa4a ("media: ti: vpe: Add the VIP driver")
Cc: stable@vger.kernel.org
Signed-off-by: Felix Gu <ustc.gu@gmail.com>
Reviewed-by: Yemike Abhilash Chandra <y-abhilashchandra@ti.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
The old hans.verkuil@cisco.com email, long since dead, still pops up
once in a while when using get_maintainer.pl. Add it back to .mailmap
so it is mapped to a working email.
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Years passed since I stopped being involved in development of these
drivers. Don't possess hardware samples, too.
Signed-off-by: Andriy Utkin <andrey_utkin@fastmail.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
The bcm2835-camera driver was dropped in commit <90204a38a760>.
Remove the paragraph in Kconfig making reference to it.
Signed-off-by: Gaston Gonzalez <gascoar@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
The bcm2835-camera driver was dropped in commit <90204a38a760>, but it
is still mentioned as a current driver in a comment section.
Remove the comment making reference to it.
Signed-off-by: Gaston Gonzalez <gascoar@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Document the zDML (Audi Digital Matrix Light) color mapping option for
the inputs and the new outputs color mapping property.
Signed-off-by: Martin Tůma <martin.tuma@digiteqautomotive.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Add zDML (a special signal mapping as used in Audi Digital Matrix Lights)
color mapping support. In addition to extending the already existing color
mapping property of the inputs, the same property is added for the outputs
that must be configured in the same way as the inputs.
Signed-off-by: Martin Tůma <martin.tuma@digiteqautomotive.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
The "magic" temperature formula must be computed using a signed integer for
negative temperatures to work properly.
Signed-off-by: Martin Tůma <martin.tuma@digiteqautomotive.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Fix incorrect plural form of the uncountable noun 'hardware' in the
legacy DVB audio documentation.
Signed-off-by: Nauman Sabir <officialnaumansabir@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Use scoped for_each_compatible_node_scoped() loop when iterating over
device nodes to make code a bit simpler.
Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
The definition of PI in the driver is not the actual value in radians,
but rather degrees. Since we are going to have a value in radians
defined in a global header, rename this definition to avoid potential
collisions. No functional changes.
Acked-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Change from my company email address to gmail.com.
Signed-off-by: Martin Hecht <mhecht73@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Change from my company email address to gmail.com.
Signed-off-by: Martin Hecht <mhecht73@gmail.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
This function initializes two large structures with arrays. On at least
parisc, the specific code sequence here leads to a badly misoptimized
output from the compiler along with a warning about the resulting
excessive stack usage from many spilled variables:
drivers/media/tuners/mxl5005s.c: In function 'MXL5005_ControlInit.isra':
drivers/media/tuners/mxl5005s.c:1660:1: warning: the frame size of 1400 bytes is larger than 1024 bytes [-Wframe-larger-than=]
Splitting this one function into two functions avoids this because there
are few temporaries that can be spilled to the stack in each of the smaller
structures, so this avoids the warning and also improves readability.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Fix alignment of function arguments to match kernel coding
style as reported by checkpatch.pl
Signed-off-by: Omer El Idrissi <omer.e.idrissi@gmail.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
In isp_video_open(), drop the use count of v4l2
pipeline if vb2_queue_init() fails.
Fixes: 8fd390b89c ("media: Split v4l2_pipeline_pm_use into v4l2_pipeline_pm_{get, put}")
Cc: stable@vger.kernel.org
Signed-off-by: Haoxiang Li <lihaoxiang@isrc.iscas.ac.cn>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
The Synopsys DesignWare MIPI CSI-2 Receiver is currently only supported
on Rockchip RK3568 SoCs. Hence add a dependency on ARCH_ROCKCHIP, to
prevent asking the user about this driver when configuring a kernel
without Rockchip platform support.
The dependency can be relaxed later, when adding support for appropriate
SoCs from other vendors (if any).
Fixes: 355a110040 ("media: synopsys: add driver for the designware mipi csi-2 receiver")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Michael Riesch <michael.riesch@collabora.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
imx258_open(), imx258_enum_mbus_code(), and imx258_enum_frame_size()
call imx258_get_format_code() without holding imx258->mutex. However,
imx258_get_format_code() has lockdep_assert_held(&imx258->mutex)
indicating that callers must hold this lock.
All other callers of imx258_get_format_code() properly acquire the mutex:
- imx258_set_pad_format() acquires mutex at imx258.c:918
- imx258_get_pad_format() acquires mutex at imx258.c:896
The mutex is needed to protect access to imx258->vflip->val and
imx258->hflip->val which are used to calculate the bayer format code.
Add mutex_lock()/mutex_unlock() around the imx258_get_format_code()
calls in the affected functions to fix the missing lock protection.
Signed-off-by: Ziyi Guo <n7l8m4@u.northwestern.edu>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
The devm_gpiod_get_optional() function may return an error pointer
(ERR_PTR) in case of a genuine failure during GPIO acquisition, not just
NULL which indicates the legitimate absence of an optional GPIO.
Add an IS_ERR() check after the function call to catch such errors and
propagate them to the probe function, ensuring the driver fails to load
safely rather than proceeding with an invalid pointer.
Signed-off-by: Chen Ni <nichen@iscas.ac.cn>
Acked-by: Krzysztof Hałasa <khalasa@piap.pl>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
The devm_gpiod_get_optional() function may return an error pointer
(ERR_PTR) in case of a genuine failure during GPIO acquisition,
not just NULL which indicates the legitimate absence of an optional
GPIO.
Add an IS_ERR() check after the function call to catch such errors and
propagate them to the probe function, ensuring the driver fails to load
safely rather than proceeding with an invalid pointer.
Signed-off-by: Chen Ni <nichen@iscas.ac.cn>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
The devm_gpiod_get_optional() function may return an error pointer
(ERR_PTR) in case of a genuine failure during GPIO acquisition, not just
NULL which indicates the legitimate absence of an optional GPIO.
Add an IS_ERR() check after the function call to catch such errors and
propagate them to the probe function, ensuring the driver fails to load
safely rather than proceeding with an invalid pointer.
Signed-off-by: Chen Ni <nichen@iscas.ac.cn>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
The devm_gpiod_get_optional() function may return an error pointer
(ERR_PTR) in case of a genuine failure during GPIO acquisition,
not just NULL which indicates the legitimate absence of an optional
GPIO.
Add an IS_ERR() check after the function call to catch such errors and
propagate them to the probe function, ensuring the driver fails to load
safely rather than proceeding with an invalid pointer.
Fixes: 1283b3b8f8 ("media: i2c: Add driver for Sony IMX219 sensor")
Cc: stable@vger.kernel.org
Signed-off-by: Chen Ni <nichen@iscas.ac.cn>
Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Reviewed-by: Jai Luthra <jai.luthra@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Three media drivers have unnecessary module_init and module_exit
functions that are empty or just print a message. Remove them. Note
that if a module_init function exists, a module_exit function must also
exist; otherwise, the module cannot be unloaded.
Signed-off-by: Ethan Nelson-Moore <enelsonmoore@gmail.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Disallow all private IOCTLs. These aren't quite as safe as one could
assume of IOCTL handlers; disable them for now. Instead of removing the
code, return in the beginning of the function if cmd is non-zero in order
to keep static checkers happy.
Reported-by: Soufiane Dani <soufianeda@tutanota.com>
Closes: https://lore.kernel.org/linux-staging/20260210-atomisp-fix-v1-1-024429cbff31@tutanota.com/
Cc: stable@vger.kernel.org
Fixes: a49d25364d ("staging/atomisp: Add support for the Intel IPU v2")
Fixes: ad85094b29 ("Revert "media: staging: atomisp: Remove driver"")
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Add the Omnivision OV5675 (ACPI HID OVTI5675) to the
ipu_supported_sensors[] table with a link frequency of 450 MHz.
This sensor is found in the Lenovo ThinkPad X1 Fold 16 Gen 1 behind
an Intel Vision Sensing Controller (IVSC). Without this entry the IPU
bridge does not create the software-node fwnode graph for the sensor,
preventing the camera from being enumerated.
Signed-off-by: Leif Skunberg <diamondback@cohunt.app>
Reviewed-by: Hans de Goede <johannes.goede@oss.qualcomm.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
A device tree compatible makes it possible for this driver to be used on
Open Firmware devices. Initialization of power-managed resources such as
the reset GPIO and voltage regulators can be specified in the device
tree and handled by the driver. Add support for this so the Pixel 3a can
use the driver.
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Reviewed-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org>
Signed-off-by: Richard Acayan <mailingradian@gmail.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
The IMX355 camera sensor is a camera sensor that can be found as the
front camera in some smartphones, such as the Pixel 3, Pixel 3 XL, Pixel
3a, and Pixel 3a XL. It already has a driver, but needs support for
device tree. Document the IMX355 to support defining it in device tree.
Reviewed-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Signed-off-by: Richard Acayan <mailingradian@gmail.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
The clock-lanes property has no effect on the hardware configuration, as
of commit 336136e197 ("media: dt-bindings: media: camss: Remove
clock-lane property"). Since boards with new camss support can omit the
property, remove it from the required lists.
Signed-off-by: Richard Acayan <mailingradian@gmail.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Omnivision OG01A1B monochrome image sensor supports 8-bit and 10-bit
output formats, add support of 8-bit Y8 format to the driver.
Signed-off-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org>
[Sakari Ailus: Fix error handling for enable_streams callback.]
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
The generic v4l2_subdev_get_fmt() helper function can be utilized to
get the setup device format instead of the custom one.
Signed-off-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Instead of wiping the camera sensor subdevice initial state on every
open() syscall it would be better to set the initial state just once.
Signed-off-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Switch the sensor driver to utilize V4L2 CCI helper interfaces instead
of driver specific wrappers over I2C read/write functions.
The conversion change is intended to be non-function, Group Access
register macros were removed as unused ones.
Signed-off-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
The change allows to simplify the driver code, in particular the explicit
locking scheme for stream on/off or format update serialization can be
dropped in favour to the one provided by the V4L2 core internals.
Signed-off-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org>
[Sakari Ailus: Fix error handling for enable_streams callback.]
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
It's necessary to finalize the camera sensor subdevice initialization on
driver probe and clean V4L2 subdevice data up on error paths and driver
removal.
The change fixes a previously reported by v4l2-compliance issue of
the failed VIDIOC_(UN)SUBSCRIBE_EVENT/DQEVENT test:
fail: v4l2-test-controls.cpp(1104): subscribe event for control 'User Controls' failed
Fixes: 472377febf ("media: Add a driver for the og01a1b camera sensor")
Signed-off-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
When switching between modes (e.g. full resolution to binned),
standby_cancel() previously cleared XMSTA (starting master mode data
output) before the new mode's MDSEL, crop, and timing registers were
programmed in start_streaming(). This caused the sensor to briefly
output MIPI data using the previous mode's configuration.
On receivers like imx-mipi-csis, this leads to FIFO overflow errors
when switching from a higher to a lower resolution, as the receiver is
configured for the new smaller frame size but receives stale
full-resolution data.
Fix this by moving the XMSTA and SYNCDRV register writes from
standby_cancel() to the end of start_streaming(), after all mode,
crop, and timing registers have been configured. Also explicitly stop
master mode (XMSTA=1) when stopping the stream, matching the pattern
used by other Sony sensor drivers (imx290, imx415).
Use named macros IMX283_XMSTA_START/STOP instead of raw 0/BIT(0) for
readability.
Cc: stable@vger.kernel.org
Fixes: ccb4eb4496 ("media: i2c: Add imx283 camera sensor driver")
Signed-off-by: Jai Luthra <jai.luthra@ideasonboard.com>
Tested-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Use IMX283_STANDBY (bit 0) instead of IMX283_STBLOGIC (bit 1) when
stopping streaming. STBLOGIC only puts the sensor logic into standby but
leaves the MIPI interface (along with other components) in an
indeterminate state.
This (presumably) causes the CSI receiver (e.g. Raspberry Pi's CFE) to
miss the LP-11 to HS transition when streaming restarts, resulting in a
hang of 10+ seconds. The issue is most visible when immediately
restarting a full-resolution stream after stopping a 3x3 binned one, so
that runtime suspend hasn't yet been triggered.
Writing IMX283_STANDBY puts the entire sensor into standby. The
imx283_standby_cancel() sequence already handles the full wakeup from
this suspended state.
Cc: stable@vger.kernel.org
Link: https://github.com/raspberrypi/linux/issues/7153
Link: https://github.com/will127534/OneInchEye/issues/12
Fixes: ccb4eb4496 ("media: i2c: Add imx283 camera sensor driver")
Signed-off-by: Jai Luthra <jai.luthra@ideasonboard.com>
Tested-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
