sctp_auth_chunk_verify() returns true unconditionally when
chunk->auth_chunk is NULL, silently skipping authentication.
This is incorrect when:
1. skb_clone() failed in the BH receive path, leaving auth_chunk
NULL. In sctp_endpoint_bh_rcv() asoc is NULL for new
connections, so the early sctp_auth_recv_cid() check cannot
catch this.
2. No AUTH chunk precedes COOKIE-ECHO, so skb_clone() is never
called and auth_chunk remains NULL.
Fix by checking sctp_auth_recv_cid() when auth_chunk is NULL:
if authentication is required, return false to drop the chunk;
otherwise continue normally.
Fixes: bbd0d59809 ("[SCTP]: Implement the receive and verification of AUTH chunk")
Signed-off-by: Qing Luo <luoqing@kylinos.cn>
Acked-by: Xin Long <lucien.xin@gmail.com>
Link: https://patch.msgid.link/20260721015532.120157-2-l1138897701@163.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When replacing the source list of an MDB remote entry, all existing
sources are first marked for deletion and vxlan_mdb_remote_srcs_add()
is then called to add the new source list. Sources present in the new
list have their deletion mark cleared, and any sources left marked
afterwards are removed.
If vxlan_mdb_remote_srcs_add() fails partway through, its error path
deletes all entries on the remote's source list. That rollback is only
correct for its other caller, vxlan_mdb_remote_add(), where the remote
was just allocated and the list contains solely entries added during
the call. On the replace path the list also holds pre-existing sources,
so a failed replace tears them down together with their (S, G)
forwarding entries instead of leaving the entry unchanged.
This is reachable from an existing (*, G) remote. An EXCLUDE filter
that loses sources starts forwarding traffic that should be blocked,
while an INCLUDE filter that loses sources drops traffic that should be
forwarded.
Mark entries created during the current pass with a new
VXLAN_SGRP_F_NEW flag. On failure, delete only those entries and clear
the deletion mark on the pre-existing ones, so a failed replace leaves
the source list untouched. Retain the flag until the whole operation
succeeds and then clear it. Also stop vxlan_mdb_remote_src_add() from
deleting a pre-existing entry it only looked up when adding that
entry's forwarding entry fails.
Fixes: a3a48de5ea ("vxlan: mdb: Add MDB control path support")
Cc: stable@vger.kernel.org
Signed-off-by: James Raphael Tiovalen <jamestiotio@gmail.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Antoine Tenart <atenart@kernel.org>
Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org>
Link: https://patch.msgid.link/20260720160428.249356-1-jamestiotio@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Since commit 1b9707e6f1 ("net: stmmac: enable RPS and RBU
interrupts"), suspending causes an interrupt storm from the RPS
interrupt.
Fix this by adding a deinit_chan() op to stmmac_dma_ops, which
masks all default dma channel interrupts. This is called from
stmmac_stop_all_dma(), so interrupts don't trigger while suspending.
Fixes: 1b9707e6f1 ("net: stmmac: enable RPS and RBU interrupts")
Suggested-by: Andrew Lunn <andrew@lunn.ch>
Suggested-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Signed-off-by: Luis Lang <luis.la@mail.de>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Tested-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Link: https://patch.msgid.link/20260720111534.163416-1-luis.la@mail.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Before converting to the phylink interface, the init function would have
set a non-reserved I/F mode in the maccfg2 register. After converting to
phylink, 0 is written as mode, which is a reserved value (although it's
the hardware default). Without a valid mode, a SGMII link is never
established between the MAC and the PHY and thus .link_up() is never
called which could set the correct mode according to the actual speed.
Fix it by setting the maximum speed of the phy_interface_t in use in
.mac_config() - just like the driver did before the phylink conversion.
Fixes: 5d93cfcf73 ("net: dpaa: Convert to phylink")
Suggested-by: Sean Anderson <sean.anderson@linux.dev>
Signed-off-by: Michael Walle <mwalle@kernel.org>
Reviewed-by: Sean Anderson <sean.anderson@linux.dev>
Reviewed-by: Sean Anderson <sean.anderson@linux.dev>
Link: https://patch.msgid.link/20260717132401.2653252-1-mwalle@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When an HSR master device is brought UP, it auto-adds VLAN 0 via
vlan_vid0_add(), which propagates VID 0 to its slave devices (slave A and B).
If a slave device is later unregistered while HSR is active (e.g., during
netns cleanup or interface destruction), hsr_del_port() is called to
detach the slave port from the HSR master. However, hsr_del_port() currently
does not delete the VLAN IDs that were synced to the slave device by HSR.
As a result, the slave device retains a refcount on VID 0 (and any other
synced VLANs). When the slave device is destroyed, its vlan_info /
vlan_vid_info structure remains allocated, leading to a memory leak.
Fix this by calling vlan_vids_del_by_dev(port->dev, master->dev) in
hsr_del_port() before unlinking slave A or slave B ports, matching the
propagation logic in hsr_ndo_vlan_rx_add_vid() / hsr_ndo_vlan_rx_kill_vid()
and the cleanup behavior in bonding and team drivers.
Fixes: 1a8a63a530 ("net: hsr: Add VLAN CTAG filter support")
Reported-by: syzbot+456957213f32970c0762@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/netdev/6a4cb6ca.57639fcc.86d58.000b.GAE@google.com/T/#u
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Fernando Fernandez Mancera <fmancera@suse.de>
Reviewed-by: Felix Maurer <fmaurer@redhat.com>
Link: https://patch.msgid.link/20260721101240.995597-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Nikolay Aleksandrov says:
====================
net: bridge: fix vlan range dumps starting with a PVID
Patch 01 fixes a bug that can skip dumping VLANs which a part of a range
starting with a PVID VLAN and share the same flags. PVID VLAN should be
always on its own. Patch 02 adds a selftest for this case. More information
can be found in the respective patches.
====================
Link: https://patch.msgid.link/20260721140922.682265-1-razor@blackwall.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add a test with PVID VLAN that matches the flags of the VLAN following it
and check if the range is properly dumped. PVID VLAN should be on its own
and all VLANs should be present in the dump.
Signed-off-by: Nikolay Aleksandrov <razor@blackwall.org>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Link: https://patch.msgid.link/20260721140922.682265-3-razor@blackwall.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
There is a bug in all range dumps that rely on br_vlan_can_enter_range()
when the PVID is a range starting VLAN, all following VLANs that match
its flags can enter the range, but when the range is filled in only the
PVID VLAN is dumped and the rest of the range is discarded because
br_vlan_fill_vids() checks for the PVID flag. Since the PVID VLAN can
be only one, we need to break ranges around it, the best way to do that
consistently for all is to alter br_vlan_can_enter_range() to take into
account the PVID and return false to break the range when it's matched.
Before the fix:
$ ip l add br0 type bridge vlan_filtering 1
$ ip l add dumdum type dummy
$ ip l set dumdum master br0
$ ip l set br0 up
$ ip l set dumdum up
$ bridge vlan add dev dumdum vid 1 pvid untagged master
$ bridge vlan add dev dumdum vid 2 untagged master
$ bridge vlan show dev dumdum # use legacy dump to show all vlans
port vlan-id
dumdum 1 PVID Egress Untagged
2 Egress Untagged
$ bridge -d vlan show dev dumdum # use the new dump (RTM_GETVLAN)
port vlan-id
dumdum 1 PVID Egress Untagged
state forwarding mcast_router 1
VLAN 2 is missing, and if there are more matching VLANs afterwards
they'd be missing too.
After the fix:
[ same setup steps ]
$ bridge vlan show dev dumdum
port vlan-id
dumdum 1 PVID Egress Untagged
2 Egress Untagged
$ bridge -d vlan show dev dumdum # use the new dump (RTM_GETVLAN)
port vlan-id
dumdum 1 PVID Egress Untagged
state forwarding mcast_router 1
2 Egress Untagged
state forwarding mcast_router 1
Fixes: 0ab5587951 ("net: bridge: vlan: add rtm range support")
Signed-off-by: Nikolay Aleksandrov <razor@blackwall.org>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Link: https://patch.msgid.link/20260721140922.682265-2-razor@blackwall.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When build_skb() fails in hip04_rx_poll(), the driver jumps to the
refill path without releasing the current RX buffer and its DMA mapping.
Installing a replacement buffer then overwrites the slot references and
leaks both resources.
Keep the current slot intact and return budget so NAPI retries the same
buffer. Also free a newly allocated RX fragment when dma_map_single()
fails.
This issue was found by an in-house static analysis tool.
Fixes: 701a0fd523 ("hip04_eth: fix missing error handle for build_skb failed")
Cc: stable@vger.kernel.org
Signed-off-by: Fan Wu <fanwu01@zju.edu.cn>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/20260712142729.2057636-1-fanwu01@zju.edu.cn
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Michael Bommarito says:
====================
amt: fix use-after-free of the skb head across pulls
Several AMT receive and transmit paths cache a pointer into the skb head
and then call a helper that can reallocate that head before the cached
pointer is used again, so the later access reads or writes freed memory.
Patch 1 walks every AMT path and, for each pointer used after a
reallocating call, either snapshots the value before the first pull or
re-derives the pointer after the last one.
Patch 2 is a smaller, separable hardening change: the three handlers
that rewrite the ethernet header do so in place without making the head
private, which corrupts a cloned skb (for example one held by a packet
tap). It adds skb_cow_head() before the rewrite, split out so the
use-after-free fix is not held up by discussion of the clone case.
====================
Link: https://patch.msgid.link/20260711151934.2955226-1-michael.bommarito@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
amt_multicast_data_handler(), amt_membership_query_handler() and
amt_update_handler() rewrite the ethernet header of the decapsulated skb
in place (eth->h_proto, eth->h_dest and, for the query, also
eth->h_source) before handing it up the stack. The skb head may be
shared, for example when a packet tap has cloned it on the underlay
interface, so writing through it corrupts the other reader's copy.
Call skb_cow_head() before the rewrite so the head is private. It is
placed before the pointers into the head are (re-)derived, so a
reallocation caused by the copy is picked up by those derivations.
Fixes: cbc21dc1cf ("amt: add data plane of amt interface")
Signed-off-by: Michael Bommarito <michael.bommarito@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Taehee Yoo <ap420073@gmail.com>
Link: https://patch.msgid.link/20260711151934.2955226-3-michael.bommarito@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Several AMT receive and transmit paths cache a pointer into the skb head
(ip_hdr(), ipv6_hdr(), eth_hdr() or the AMT message header) and then call
a helper that can reallocate that head before the cached pointer is used
again. pskb_may_pull(), ip_mc_may_pull(), ipv6_mc_may_pull(),
iptunnel_pull_header(), ip_mc_check_igmp() and ipv6_mc_check_mld() can all
free the old head and move the data, so a pointer taken before the call
dangles afterwards and the later access is a use-after-free of the freed
head.
The affected sites are:
amt_rcv() caches ip_hdr() before amt_parse_type() pulls, then reads
iph->saddr.
amt_dev_xmit() caches ip_hdr()/ipv6_hdr() before ip_mc_check_igmp()/
ipv6_mc_check_mld() and pskb_may_pull(), then reads the group address.
amt_multicast_data_handler() caches eth_hdr() before pskb_may_pull(),
then writes the L2 header.
amt_membership_query_handler() caches the AMT header, the outer and
inner eth_hdr() and ip_hdr() before iptunnel_pull_header() and several
pulls, then reads and writes them.
amt_igmpv3_report_handler() and amt_mldv2_report_handler() cache
ip_hdr()/ipv6_hdr() and the current group record and read the record
count from the report header inside the record loop, across the
*_mc_may_pull() calls.
amt_update_handler() caches ip_hdr() and the AMT membership-update
header before pskb_may_pull(), iptunnel_pull_header(),
ip_mc_check_igmp() and the report handler, then reads iph->daddr and
amtmu->nonce / amtmu->response_mac.
Fix each site by either snapshotting the scalar that is used after the
pull before the first pull runs, or re-deriving the header pointer from
the skb after the last pull that can move the head. Values that are
stable across the pull (source and group address, the response MAC and
nonce, the record count, the outer source MAC) are snapshotted; pointers
that are written through or read repeatedly are re-derived.
Fixes: cbc21dc1cf ("amt: add data plane of amt interface")
Signed-off-by: Michael Bommarito <michael.bommarito@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Taehee Yoo <ap420073@gmail.com>
Link: https://patch.msgid.link/20260711151934.2955226-2-michael.bommarito@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
During reset recovery, mt7925_vif_connect_iter() replays firmware state
for links tracked in mvif->valid_links. After MLO link changes or MCU
timeout recovery, the driver bitmap can temporarily contain a link whose
mac80211 bss_conf has already gone away.
This can pass a NULL bss_conf to mt76_connac_mcu_uni_add_dev(), matching
the crash where x1, the second argument, is NULL:
pc : mt76_connac_mcu_uni_add_dev+0x8c/0x1f8 [mt76_connac_lib]
lr : mt7925_vif_connect_iter+0x9c/0x168 [mt7925_common]
x2 : ffffff80a77f6018 x1 : 0000000000000000 x0 : ffffff8099402080
Call trace:
mt76_connac_mcu_uni_add_dev+0x8c/0x1f8 [mt76_connac_lib]
mt7925_vif_connect_iter+0x9c/0x168 [mt7925_common]
mt7925_mac_reset_work+0x264/0x2f8 [mt7925_common]
Skip missing bss_conf entries before replaying the link. Non-MLO AP/STA
reset replay is unchanged because the helper still returns &vif->bss_conf
for the legacy link.
Fixes: 1406199418 ("wifi: mt76: mt7925: add link handling in mt7925_vif_connect_iter")
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Link: https://patch.msgid.link/20260616161016.19346-1-sean.wang@kernel.org
Signed-off-by: Felix Fietkau <nbd@nbd.name>
There is a new build failure with MT7996E=m MT76_CORE=y and NET_AIROHA_NPU=m:
ld.lld: error: undefined symbol: airoha_npu_get
ld.lld: error: undefined symbol: airoha_npu_put
>>> referenced by npu.c
>>> drivers/net/wireless/mediatek/mt76/npu.o:(mt76_npu_init) in archive vmlinux.a
Fix this by reworking the dependency for the MT7996_NPU to only
allow enabling that when mt76_core can link against the npu driver.
To make sure this gets caught more easily in the future when additional
mt76 variants need the same dependency, also turn CONFIG_MT76_NPU into
a tristate symbol that has the same dependency.
Fixes: 7fb554b1b6 ("wifi: mt76: Introduce the NPU generic layer")
Acked-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://patch.msgid.link/20260612201519.4054683-1-arnd@kernel.org
Signed-off-by: Felix Fietkau <nbd@nbd.name>
mt76_npu_device_active() and mt76_ppe_device_active() read dev->mmio.npu
and dev->mmio.ppe_dev. The mmio, usb and sdio bus structs share a union in
struct mt76_dev, so on USB and SDIO these read unrelated data from the
usb/sdio struct, which is non-NULL in practice.
mt76_npu_device_active() then returns true on USB, and
mt76_rx_poll_complete() takes the offload path and skips
mt76_rx_aggr_reorder(). RX A-MPDU subframes are delivered out of order and
the peer's TCP stack treats that as loss: heavy retransmissions and reduced
throughput in AP mode. Seen on mt7921u, mt7925u, mt76x2u and mt76x0u.
Gate both helpers on mt76_is_mmio() so they only run for the bus type that
owns the mmio union member.
Fixes: 7fb554b1b6 ("wifi: mt76: Introduce the NPU generic layer")
Cc: stable@vger.kernel.org
Tested-by: Nick Morrow <morrownr@gmail.com>
Signed-off-by: Devin Wittmayer <lucid_duck@justthetip.ca>
Link: https://patch.msgid.link/20260720232640.41293-1-lucid_duck@justthetip.ca
Signed-off-by: Felix Fietkau <nbd@nbd.name>
mt7915_mcu_bss_he_tlv() and mt7915_mcu_sta_bfer_tlv() both run after
checking HE support, then dereference the HE PHY capability returned by
mt76_connac_get_he_phy_cap(). That helper can return NULL when no
capability entry matches the vif type.
Fetch the capability before appending the TLV and skip the HE-specific
setup when no matching capability is available.
Fixes: e6d557a78b ("mt76: mt7915: rely on mt76_connac_get_phy utilities")
Signed-off-by: Ruoyu Wang <ruoyuw560@gmail.com>
Acked-by: Lorenzo Bianconi <lorenzo@kernel.org>
Link: https://patch.msgid.link/20260620155332.81120-1-ruoyuw560@gmail.com
Signed-off-by: Felix Fietkau <nbd@nbd.name>
mt7925_sta_set_decap_offload() iterates over the vif valid_links mask
when updating decap offload state for an MLO station. The station may not
have a link STA for every valid link of the vif, so mt792x_sta_to_link()
can return NULL for a link that belongs to the vif but not to the station.
The function currently dereferences mlink before checking whether the
link WCID is ready. If mlink is NULL, setting or clearing
MT_WCID_FLAG_HDR_TRANS dereferences a NULL pointer.
Skip links without a station link before touching mlink->wcid.
Fixes: b859ad6530 ("wifi: mt76: mt7925: add link handling in mt7925_sta_set_decap_offload")
Signed-off-by: Guangshuo Li <lgs201920130244@gmail.com>
Link: https://patch.msgid.link/20260708075539.726200-1-lgs201920130244@gmail.com
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Unloading the mt7915e module with a MT7916 triggers multiples WARN in
__netif_napi_del_locked() and in page_pool_disable_direct_recycling()
because the driver does not disable the napi before destroying it.
This is troublesome since on MT7916 it is required to unload the module
and reinsert it with a different enable_6ghz parameter to change the
frequency. The system generally becomes unstable after reinserting the
module.
Fix it by disabling napi before deleting it. Also, do not delete napi
on WED queues since napi is neither used nor initialized on them.
Fixes: 17f1de56df ("mt76: add common code shared between multiple chipsets")
Signed-off-by: Nicolas Cavallari <nicolas.cavallari@green-communications.fr>
Link: https://patch.msgid.link/20260708144615.24092-1-nicolas.cavallari@green-communications.fr
Signed-off-by: Felix Fietkau <nbd@nbd.name>
PKT_TYPE_TXRX_NOTIFY is an mmio-only event, but mt7615_rx_check() and
mt7615_queue_rx_skb() dispatch it to mt7615_mac_tx_free() on every bus.
mt7615_mac_tx_free() cleans the DMA tx queues with
mt76_queue_tx_cleanup(), which calls queue_ops->tx_cleanup(). Only the
mmio queue ops implement that callback; on the mt7663 USB and SDIO
buses it is NULL, so a TXRX_NOTIFY there calls a NULL pointer in the RX
worker. Same defect as the mt7921 and mt7925 patches in this series.
Drop the event on non-mmio buses via mt76_is_mmio(), as in
commit 5683e1488a ("wifi: mt76: connac: do not check WED status for
non-mmio devices").
Fixes: eb99cc95c3 ("mt76: mt7615: introduce mt7663u support")
Cc: stable@vger.kernel.org
Signed-off-by: Devin Wittmayer <lucid_duck@justthetip.ca>
Link: https://patch.msgid.link/20260627191336.20223-4-lucid_duck@justthetip.ca
Signed-off-by: Felix Fietkau <nbd@nbd.name>
PKT_TYPE_TXRX_NOTIFY is an mmio-only event, but mt7925_rx_check() and
mt7925_queue_rx_skb() dispatch it to mt7925_mac_tx_free() on every bus.
mt7925_mac_tx_free() cleans the DMA tx queues with
mt76_queue_tx_cleanup(), which calls queue_ops->tx_cleanup(). Only the
mmio queue ops implement that callback; on USB it is NULL, so a
TXRX_NOTIFY there calls a NULL pointer in the RX worker:
BUG: kernel NULL pointer dereference, address: 0000000000000000
RIP: 0010:0x0
Call Trace:
mt7925_mac_tx_free+0x58/0x350 [mt7925_common]
mt7925_rx_check+0xe2/0x130 [mt7925_common]
mt76u_rx_worker+0x1b9/0x620 [mt76_usb]
Drop the event on non-mmio buses via mt76_is_mmio(), as in
commit 5683e1488a ("wifi: mt76: connac: do not check WED status for
non-mmio devices").
Fixes: c948b5da6b ("wifi: mt76: mt7925: add Mediatek Wi-Fi7 driver for mt7925 chips")
Cc: stable@vger.kernel.org
Signed-off-by: Devin Wittmayer <lucid_duck@justthetip.ca>
Link: https://patch.msgid.link/20260627191336.20223-3-lucid_duck@justthetip.ca
Signed-off-by: Felix Fietkau <nbd@nbd.name>
PKT_TYPE_TXRX_NOTIFY is an mmio-only event, but mt7921_rx_check() and
mt7921_queue_rx_skb() dispatch it to mt7921_mac_tx_free() on every bus.
mt7921_mac_tx_free() cleans the DMA tx queues with
mt76_queue_tx_cleanup(), which calls queue_ops->tx_cleanup(). Only the
mmio queue ops implement that callback; on USB and SDIO it is NULL, so
a TXRX_NOTIFY there calls a NULL pointer in the RX worker:
BUG: kernel NULL pointer dereference, address: 0000000000000000
RIP: 0010:0x0
Call Trace:
mt7921_mac_tx_free+0x64/0x310 [mt7921_common]
mt7921_rx_check+0x5f/0xf0 [mt7921_common]
mt76u_rx_worker+0x1b9/0x620 [mt76_usb]
Drop the event on non-mmio buses via mt76_is_mmio(), as in
commit 5683e1488a ("wifi: mt76: connac: do not check WED status for
non-mmio devices").
Fixes: 48fab5bbef ("mt76: mt7921: introduce mt7921s support")
Cc: stable@vger.kernel.org
Signed-off-by: Devin Wittmayer <lucid_duck@justthetip.ca>
Link: https://patch.msgid.link/20260627191336.20223-2-lucid_duck@justthetip.ca
Signed-off-by: Felix Fietkau <nbd@nbd.name>
dev->stats fields can be updated concurrently from multiple CPUs
without synchronization.
Use DEV_STATS_INC() for stats increments and DEV_STATS_READ()
when reading dev->stats in ppp_get_stats64() and ppp_get_stats()
to avoid data races.
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Qingfang Deng <qingfang.deng@linux.dev>
Link: https://patch.msgid.link/20260715055541.1147542-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
intel_mac_finish() is registered as the phylink mac_finish()
callback for the Elkhart Lake SGMII ports. phylink calls it at
the end of every major link reconfiguration, including the
initial one during probe.
The callback selects the PMC ModPHY LCPLL programming for the
requested MAC-side interface and then power-cycles the SerDes.
On Elkhart Lake that ModPHY is also used by the on-die AHCI
SATA PHY. Reapplying the programming during the initial
boot-time link-up disturbs the shared analog block while it is
still driving SATA, so the SATA link fails to train:
ata1: SATA link down (SStatus 1 SControl 300)
The disk carrying the root filesystem is never detected and the
system hangs at rootwait. Ethernet itself comes up normally,
which makes the failure look unrelated to the network driver.
Before mac_finish() runs, the legacy SerDes power-up path has
already programmed SERDES_GCR0 for the current interface. The
1G and 2.5G ModPHY tables selected by mac_finish() correspond
to the SerDes lane rate, so read that rate back from SERDES_GCR0
and skip the PMC reprogramming and SerDes power-cycle when it
already matches the selected interface.
This keeps the disruptive reprogramming out of the boot path
when the SerDes is configured correctly, while preserving the
previous behavior when a real SGMII/1000BASE-X to 2500BASE-X
rate change is needed. If the register read fails, reconfigure
as before.
Fixes: a42f6b3f1c ("net: stmmac: configure SerDes according to the interface mode")
Cc: stable@vger.kernel.org
Signed-off-by: Markus Breitenberger <bre@keba.com>
Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Link: https://patch.msgid.link/20260713171619.192452-1-bre@breiti.cc
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
tcp_v4_send_ack() and tcp_v6_send_response() construct standalone TCP
responses with TCP-AO options. The option length carries the actual MAC
length, but the TCP header length includes the option rounded up to a
four-byte boundary.
tcp_ao_hash_hdr() writes the MAC only. Thus, when the MAC length is not
four-byte aligned, the one to three bytes after the MAC are left
uninitialized and may be transmitted. For the normal TCP-AO hashing
mode, those bytes also have to be initialized before computing the MAC.
Initialize only the alignment padding in the TCP-AO branches, before
hashing the header. Use TCPOPT_NOP, as in the normal TCP-AO output path.
This avoids adding work to non-AO TCP responses while preserving a valid
authenticated header.
Fixes: decde2586b ("net/tcp: Add TCP-AO sign to twsk")
Fixes: da7dfaa6d6 ("net/tcp: Consistently align TCP-AO option in the header")
Cc: stable@vger.kernel.org
Reported-by: Yizhou Zhao <zhaoyz24@mails.tsinghua.edu.cn>
Reported-by: Yuxiang Yang <yangyx22@mails.tsinghua.edu.cn>
Reported-by: Ao Wang <wangao@seu.edu.cn>
Reported-by: Xuewei Feng <fengxw06@126.com>
Reported-by: Qi Li <qli01@tsinghua.edu.cn>
Reported-by: Ke Xu <xuke@tsinghua.edu.cn>
Suggested-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Yizhou Zhao <zhaoyz24@mails.tsinghua.edu.cn>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20260713105631.8616-1-zhaoyz24@mails.tsinghua.edu.cn
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
cmd->dumpit callback can return a negative errno, causing an infinite
loop due to the while(len) condition. As the loop never terminates,
genl_mutex is never released, and other tasks waiting on it starve in D
state.
Check dumpit's return value, propagate it and jump to err_out on error.
Reported-by: syzbot+85d0bec020d805014a3a@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=85d0bec020d805014a3a
Fixes: d0796d1ef6 ("tipc: convert legacy nl bearer dump to nl compat")
Signed-off-by: Helen Koike <koike@igalia.com>
Reviewed-by: Tung Nguyen <tung.quang.nguyen@est.tech
Reviewed-by: Tung Nguyen <tung.quang.nguyen@est.tech>
Link: https://patch.msgid.link/20260713204940.647668-1-koike@igalia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
nh_res_bucket_migrate() passes an uninitialized netlink_ext_ack to
call_nexthop_res_bucket_notifiers(). When
nh_notifier_res_bucket_info_init() fails (e.g. the kzalloc returns
-ENOMEM), the error is propagated back before any notifier sets
extack._msg, and the error path formats the stale pointer with
pr_err_ratelimited("%s\n", extack._msg). With CONFIG_INIT_STACK_NONE
this dereferences uninitialized stack memory:
Oops: general protection fault, probably for non-canonical address ...
KASAN: maybe wild-memory-access in range [...]
RIP: 0010:string (lib/vsprintf.c:730)
vsnprintf (lib/vsprintf.c:2945)
_printk (kernel/printk/printk.c:2504)
nh_res_bucket_migrate (net/ipv4/nexthop.c:1816)
nh_res_table_upkeep (net/ipv4/nexthop.c:1866)
rtm_new_nexthop (net/ipv4/nexthop.c:3323)
rtnetlink_rcv_msg (net/core/rtnetlink.c:7076)
netlink_sendmsg (net/netlink/af_netlink.c:1900)
Kernel panic - not syncing: Fatal exception
Zero-initialize extack so _msg is NULL on error paths that never set it.
Fixes: 7c37c7e004 ("nexthop: Implement notifiers for resilient nexthop groups")
Reported-by: AutonomousCodeSecurity@microsoft.com
Signed-off-by: Xiang Mei (Microsoft) <xmei5@asu.edu>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Link: https://patch.msgid.link/20260713221551.3344650-1-xmei5@asu.edu
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
gtp1u_send_echo_resp() ignores skb_pull_data()'s return value. Its
caller gtp1u_udp_encap_recv() only guarantees 16 bytes (udphdr +
gtp1_header), but the pull requests 20 (gtp1_header_long + udphdr). For
a 16-19 byte echo request the pull fails and returns NULL without
advancing skb->data; execution continues, and the following skb_push()
plus the IP header pushed by iptunnel_xmit() move skb->data below
skb->head, tripping skb_under_panic().
Fix it by dropping the packet when skb_pull_data() fails.
skbuff: skb_under_panic: ...
kernel BUG at net/core/skbuff.c:214!
Call Trace:
skb_push (net/core/skbuff.c:2648)
iptunnel_xmit (net/ipv4/ip_tunnel_core.c:82)
gtp_encap_recv (drivers/net/gtp.c:701 drivers/net/gtp.c:808 drivers/net/gtp.c:920)
udp_queue_rcv_one_skb (net/ipv4/udp.c:2388)
...
Kernel panic - not syncing: Fatal exception in interrupt
Fixes: 9af41cc334 ("gtp: Implement GTP echo response")
Reported-by: AutonomousCodeSecurity@microsoft.com
Signed-off-by: Xiang Mei (Microsoft) <xmei5@asu.edu>
Link: https://patch.msgid.link/20260710230724.942574-1-xmei5@asu.edu
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Matthieu Baerts says:
====================
selftests: net: add missing kconfig and settings
When trying to execute the same selftests targets as the ones executed
on NIPA, but using containers with minimal tools, I got some issues
with a few tests.
Most of these issues are due to missing kernel config, but also too
short timeout:
- For the kconfig, these issues were not visible on NIPA, because some
targets are executed in the same runner, using the same kernel: the
config files of the different targets are merged. On my side, I
followed the recommended way, and only used the config file on top of
a 'make defconfig', revealing some missing kconfig's.
- For the timeout, that was not visible on NIPA either because the
Netdev machines are very powerful and the timeout is doubled when
using a debug kernel config (ovpn case), or because there are some
custom values on the test branches only (drv-net).
While at it, add an extra patch to display an error message in case of
failure with some netconsole scripts.
====================
Link: https://patch.msgid.link/20260710-net-sft-fix-containers-v1-0-a2915c294ef5@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In these netconsole tests, bash is used with errexit (set -e). It means
that if the busywait timeout, the tests finish without printing an error
message.
It is fine to ignore these errors, because the following validate_xxx
helpers will check the content of the output file, and exit with an
appropriated error message, e.g. FAIL: File was not generated.
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Reviewed-by: Breno Leitao <leitao@debian.org>
Link: https://patch.msgid.link/20260710-net-sft-fix-containers-v1-7-a2915c294ef5@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This psp.py selftest was failing on my side when only using the
drivers/net config file on top of the default one -- the recommended way
to execute selftest targets.
It looks like some kernel config are needed to execute the new tc
commands.
Note that this was not visible on NIPA, because these tests are executed
with the drivers/net/hw ones, combining the two config files, and the hw
one contains the missing ones.
Fixes: 3f74d5bb80 ("selftests/net: Add env for container based tests")
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Reviewed-by: Wei Wang <weibunny@fb.com>
Link: https://patch.msgid.link/20260710-net-sft-fix-containers-v1-6-a2915c294ef5@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The default timeout is 45 seconds, that's too low for the xdp.py test.
Indeed, this test can take up to 3 minutes with some debug kernel config
on NIPA. Set a timeout to 6 minutes, just to be on the safe side.
Note that the Fixes tag here points to the introduction of the xdp.py
test because I don't know when this test started to take more than 45
seconds. That's OK because a timeout of 6 minutes is not exaggerated.
Fixes: 1cbcb1b28b ("selftests: drv-net: Test XDP_PASS/DROP support")
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20260710-net-sft-fix-containers-v1-5-a2915c294ef5@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The default timeout is 45 seconds, that's too low for a few ovpn tests.
Indeed, these tests can take up to 50 seconds with some debug kernel
config on NIPA. Set a timeout to 90 seconds, just to be on the safe
side.
Note that the Fixes tag here points to the introduction of the ovpn
tests because I don't know when they started to take more than 45
seconds. That's OK because a timeout of 1.5 minutes is not exaggerated.
Fixes: 959bc330a4 ("testing/selftests: add test tool and scripts for ovpn module")
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Acked-by: Antonio Quartulli <antonio@openvpn.net>
Link: https://patch.msgid.link/20260710-net-sft-fix-containers-v1-4-a2915c294ef5@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
They are required to run the selftests:
- Tests are executed in v4 and v6.
- Virtual Ethernet are used between the different netns.
This has not been seen on NIPA before, because the 'ovpn' tests are
executed with the 'tcp_ao' ones, merging their config files. These two
kernel config are present in tools/testing/selftests/net/tcp_ao/config.
This issue is visible when only the ovpn config is used on top of the
default one. This is the recommended way to execute selftest targets.
Fixes: 959bc330a4 ("testing/selftests: add test tool and scripts for ovpn module")
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Acked-by: Antonio Quartulli <antonio@openvpn.net>
Link: https://patch.msgid.link/20260710-net-sft-fix-containers-v1-3-a2915c294ef5@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The kselftests doc mentions that a config file should be present "if a
test needs specific kernel config options enabled". This selftest
requires some kernel config, but no config file was provided.
We could say that a sub-target could use the parent's config file, but
the kselftests doc doesn't mention anything about that. Plus the
net/openvswitch target is the only net target without a config file.
Here is a new config file, which is a trimmed version of the net one,
with hopefully the minimal required kconfig on top of 'make defconfig'.
The Fixes tag points to the introduction of the net/openvswitch target,
just to help validating this target on stable kernels.
Fixes: 25f16c873f ("selftests: add openvswitch selftest suite")
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Reviewed-by: Eelco Chaudron <echaudro@redhat.com>
Link: https://patch.msgid.link/20260710-net-sft-fix-containers-v1-2-a2915c294ef5@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This is required to use unshare(CLONE_NEWUSER).
This has not been seen on NIPA before, because the 'af_unix' tests are
executed with the 'net' ones, merging their config files. USER_NS is
present in tools/testing/selftests/net/config.
This issue is visible when only the af_unix config is used on top of the
default one. This is the recommended way to execute selftest targets.
Fixes: ac011361bd ("af_unix: Add test for sock_diag and UDIAG_SHOW_UID.")
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Reviewed-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20260710-net-sft-fix-containers-v1-1-a2915c294ef5@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
On kTLS device-offload sockets, sendfile() with count > EOF can reach
->splice_eof() with a fully assembled but still-open TLS record left
pending. tls_device_splice_eof() only flushes partially sent records,
so an abrupt close() can drop the final record and the peer receives
a short file.
Fix tls_device_splice_eof() to also push pending open records.
This matches the software path, where splice EOF already flushes
pending open records.
Fixes: d4c1e80b0d ("tls/device: Use splice_eof() to flush")
Link: https://lore.kernel.org/netdev/CAMPsyauZ+jzG9AysO0FWv6ZY0kvCUpjX_U7o=oOjCuOQ87BCgg@mail.gmail.com/
Reported-by: Nils Juenemann <nils.juenemann@gmail.com>
Signed-off-by: Rishikesh Jethwani <rjethwani@purestorage.com>
Tested-by: Nils Juenemann <nils.juenemann@gmail.com>
Link: https://patch.msgid.link/20260709224436.1608993-2-rjethwani@purestorage.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When the system is under extreme memory pressure, page allocations can
fail during the Rx buffer refill loop. If the number of buffers posted
to hardware falls below a critical low threshold and the refill loop
exits due to allocation failures, the queue can stall:
1. The device drops incoming packets because there are no descriptors.
2. Since no packets are processed, no Rx completions are generated.
3. Because no completions occur, NAPI is never scheduled, preventing
the refill loop from running again even after memory is freed.
This results in a permanent queue stall.
Resolve this by introducing a starvation recovery timer for each Rx queue.
If the number of buffers posted to hardware falls below a critical low
threshold, start a timer to periodically reschedule NAPI. Once NAPI runs
and successfully refills the queue above the threshold, the timer is
not rescheduled.
The threshold is set to 32 because a single maximum-sized Receive Segment
Coalescing (RSC) packet can consume up to 19 descriptors in the Rx path.
Lower thresholds (such as 8 or 16) would be insufficient to process a
complete maximum-sized RSC packet, risking packet drops or unexpected
hardware behavior under memory pressure. Setting the threshold to 32
guarantees a safe margin to handle at least one full RSC packet.
Cc: stable@vger.kernel.org
Fixes: 9b8dd5e5ea ("gve: DQO: Add RX path")
Reviewed-by: Jordan Rhee <jordanrhee@google.com>
Signed-off-by: Eddie Phillips <eddiephillips@google.com>
Signed-off-by: Harshitha Ramamurthy <hramamurthy@google.com>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Link: https://patch.msgid.link/20260709211906.3322883-1-hramamurthy@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
mctp_i3c_mod_init() registers the I3C bus notifier and then walks the
existing buses with i3c_for_each_bus_locked(mctp_i3c_bus_add_new, NULL)
before registering the I3C device driver. If i3c_driver_register()
fails, the function returns the error directly, leaving the notifier
registered and every mctp_i3c_bus object created for the existing buses
allocated. The notifier is left pointing into the module that failed to
load and the bus list is leaked.
Mirror the module exit path on this failure: unregister the notifier and
tear down the buses that were added before returning the error.
This issue was identified during our ongoing static-analysis research while
reviewing kernel code.
Fixes: c8755b29b5 ("mctp i3c: MCTP I3C driver")
Co-developed-by: Ijae Kim <ae878000@gmail.com>
Signed-off-by: Ijae Kim <ae878000@gmail.com>
Signed-off-by: Myeonghun Pak <mhun512@gmail.com>
Acked-by: Jeremy Kerr <jk@codeconstruct.com.au>
Link: https://patch.msgid.link/20260715072517.13216-1-mhun512@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
proc_sctp_do_udp_port() starts per-net SCTP UDP tunneling sockets when
net.sctp.udp_port is set, and stops/restarts them when the sysctl value
changes. The netns exit path does not stop these sockets, so a namespace
can be torn down while its SCTP UDP tunnel sockets are still installed.
Close the UDP tunnel sockets from sctp_ctrlsock_exit() after unregistering
the per-net sysctl table. This prevents new sysctl writes from racing in
while the sockets are being released, and closes the sockets before the
control socket is destroyed.
Fixes: 046c052b47 ("sctp: enable udp tunneling socks")
Cc: stable@vger.kernel.org
Reported-by: Sashiko <sashiko-bot@kernel.org>
Closes: https://sashiko.dev/#/patchset/b9f1f02b0780ad6a719e2413f5f0bb8eb7702d94.1782585631.git.roxy520tt%40gmail.com
Signed-off-by: Zhiling Zou <roxy520tt@gmail.com>
Signed-off-by: Ren Wei <n05ec@lzu.edu.cn>
Acked-by: Xin Long <lucien.xin@gmail.com>
Link: https://patch.msgid.link/6dab75f22855cb219e2e30a5497cab03b970ab91.1784033357.git.roxy520tt@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
