The driver notifies the hardware to handle task through
doorbell. Currently, doorbell is enabled by default. To
prevent the process from sending doorbells during hardware
reset scenarios, which could cause the hardware to process
doorbells and trigger new errors:
For example, when the physical machine is resetting the device,
doorbells are still being sent from the virtual machine.
Therefore, the driver disables doorbell during hardware
unavailability. After hardware initialization is completed,
doorbell is enabled, and any task sent during the unavailability
period will return errors.
The hardware supports the PF to disable doorbells for all functions,
while the VF can only disable its own doorbell function. When the PF
is reset, it will disable doorbells for all functions. When VF is
reset, it only disables its own doorbell and does not affect tasks
on other functions.
Signed-off-by: Zongyu Wu <wuzongyu1@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Each bit in the error interrupt register corresponds to a specific
error type. A bit value of 0 enables the interrupt, and a bit value
of 1 disables the interrupt. Currently, when disabling interrupts,
it incorrectly enables the interrupt types that were not enabled.
Therefore, when disabling interrupts, all bits should be directly
written to 1.
Signed-off-by: Weili Qian <qianweili@huawei.com>
Signed-off-by: Zongyu Wu <wuzongyu1@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Before function level reset, driver first disable device error report
and then waits for the device reset to complete. However, when the
error is recovered, the error bits will be enabled again, resulting in
invalid disable. It is modified to detect that there is no error
before disable error report, and then do FLR.
Fixes: 7ce396fa12 ("crypto: hisilicon - add FLR support")
Signed-off-by: Weili Qian <qianweili@huawei.com>
Signed-off-by: Zongyu Wu <wuzongyu1@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
When executing operations on crypto devices, hardware errors
are inevitable. For certain errors, a full device reset is
required to recover. However, in certain cases, only a
specific function may fail, while other functions can still
operate normally. A system-wide RAS reset in such cases would
unnecessarily impact functioning components.
This patch introduces function-level granularity handling,
enabling targeted resets of only the error-reporting
functions without affecting other operational functions.
Signed-off-by: Zhushuai Yin <yinzhushuai@huawei.com>
Signed-off-by: Zongyu Wu <wuzongyu1@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
To avoid accessing memory of a suspended device, and since the counter
interface used by PM involves sleep operations, the counter interface
cannot be placed in the interrupt top half. Therefore, the interface for
acquiring the interrupt status in the RAS reset flow that resides in the
interrupt context needs to be moved to the bottom half for processing.
Signed-off-by: Zhushuai Yin <yinzhushuai@huawei.com>
Signed-off-by: Zongyu Wu <wuzongyu1@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The problem that the VF device cannot obtain the isolation
status and isolation threshold of the device is resolved.
The accelerator driver can query the device isolation status
and threshold via the VF device using the fault query sysfs
interface under uacce. Note that only the PF device supports
isolation policy configuration, while the VF device is
limited to read-only query operations.
Signed-off-by: Zhushuai Yin <yinzhushuai@huawei.com>
Signed-off-by: Zongyu Wu <wuzongyu1@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Commit 13909a0c88 ("crypto: atmel-sha204a - provide the otp content")
overwrote the hwrng registration return value when creating the sysfs
group, which allowed atmel_sha204a_probe() to succeed even if
devm_hwrng_register() failed.
Return immediately when devm_hwrng_register() fails, and report both
hwrng and sysfs registration errors with dev_err(). Adjust the sysfs
error log message for consistency.
Fixes: 13909a0c88 ("crypto: atmel-sha204a - provide the otp content")
Cc: stable@vger.kernel.org
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
atmel_sha204a_probe() registers the hwrng before creating the sysfs
group. Mirror this order in atmel_sha204a_remove() by removing the sysfs
group before unregistering the hwrng.
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Drop of_match_ptr() because OF matching is stubbed out when CONFIG_OF=n.
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
CRYPTO_DEV_OMAP_DES only depends on ARCH_OMAP2PLUS, which is ARM-only
and selects OF via ARM's USE_OF, making any non-OF code unreachable.
Add COMPILE_TEST so the driver can be built with CONFIG_OF=n, making the
non-OF code reachable.
Fix the resulting non-OF build failures:
- omap_des_irq() was defined inside a CONFIG_OF block, but is referenced
unconditionally from omap_des_probe(). Move the CONFIG_OF guard so it
only covers omap_des_get_of().
- The non-OF omap_des_get_of() stub took a struct device *, while
omap_des_probe() passes a struct platform_device *. Make the stub
prototype match the OF implementation and the caller.
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The last MIPS crypto code was moved to lib/crypto/mips in
commit c9e5ac0ab9 ("lib/crypto: mips/md5: Migrate optimized code into
library"). However, arch/mips/crypto still contains stub Kconfig,
Makefile, and .gitignore files. Remove these unnecessary files.
Signed-off-by: Ethan Nelson-Moore <enelsonmoore@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
All LoongArch crypto code was moved to arch/loongarch/lib in
commit 72f51a4f4b ("loongarch/crc32: expose CRC32 functions through
lib"). However, arch/loongarch/crypto still contains stub Kconfig and
Makefile files. Remove these unnecessary files.
Signed-off-by: Ethan Nelson-Moore <enelsonmoore@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Use memcpy_and_pad() instead of memcpy() followed by memset() to
simplify atmel_sha_hmac_setup().
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Drop of_match_ptr() because OF matching is stubbed out when CONFIG_OF=n.
Indent bcm_spu_pdriver.driver and its members while at it.
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This patch fixes a descriptor ring reset. This causes a hang in the
driver's unload/load sequence.
Fixes: 9739f5f93b ("crypto: eip93 - Add Inside Secure SafeXcel EIP-93 crypto engine support")
Suggested-by: Benjamin Larsson <benjamin.larsson@genexis.eu>
Signed-off-by: Aleksander Jan Bajkowski <olek2@wp.pl>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The callback already has the correct type - remove the redundant cast.
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The UX500 crypto drivers were removed in commit 453de3eb08
("crypto: ux500/cryp - delete driver") and commit dd7b7972cb
("crypto: ux500/hash - delete driver"). No file includes
this header.
Assisted-by: Claude:claude-opus-4-6
Signed-off-by: Costa Shulyupin <costa.shul@redhat.com>
Reviewed-by: Linus Walleij <linusw@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Since commit "gpu: host1x: Allow entries in BO caches to be freed",
host1x_bo_pin() and host1x_bo_unpin() handle the bo's refcount
themselves. .pin/.unpin callbacks should not adjust it.
Signed-off-by: Mikko Perttunen <mperttunen@nvidia.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Use the simpler min() macro since the values are unsigned and
compatible.
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
x509_load_certificate_list() seeks to enforce that a certificate starts
with 0x30 0x82 (ASN.1 SEQUENCE tag followed by a length of more than 256
and less than 65535 bytes).
But it only enforces that *either* of those two byte values are present,
instead of checking for the *conjunction* of the two values. Fix it.
Fixes: 631cc66eb9 ("MODSIGN: Provide module signing public keys to the kernel")
Reported-by: Sashiko <sashiko-bot@kernel.org>
Closes: https://lore.kernel.org/r/20260508033917.B5873C2BCB0@smtp.kernel.org/
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Cc: stable@vger.kernel.org # v3.7+
Reviewed-by: Ignat Korchagin <ignat@linux.win>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The term "capability" typically refers to an ability to perform an
action, whereas "capacity" denotes a measurable amount of resources.
Since the sysfs-driver-qat_rl document describes remaining resources
available to perform work, "capacity" is the more accurate term.
Replace "capability" with "capacity" in the document.
Signed-off-by: Fiona Trahe <fiona.trahe@intel.com>
Reviewed-by: Ahsan Atta <ahsan.atta@intel.com>
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
A reset requested through /sys/bus/pci/devices/.../reset invokes the
driver reset_prepare() and reset_done() callbacks. The QAT driver does
not implement those callbacks today, so the reset proceeds without
quiescing the device or bringing it back up afterward, which leaves
the device unusable.
Hook reset_prepare() and reset_done() into adf_err_handler so the
common shutdown and recovery flow also runs for reset. Skip device
quiesce if the device is already in a down state.
Cc: stable@vger.kernel.org
Signed-off-by: Ahsan Atta <ahsan.atta@intel.com>
Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Reviewed-by: Damian Muszynski <damian.muszynski@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Move the shutdown and recovery sequences out of adf_error_detected()
and adf_slot_reset() into reset_prepare() and reset_done() helpers.
This makes the AER recovery path easier to follow and prepares the
common reset flow for reuse by additional PCI reset callbacks without
duplicating the logic.
No functional change intended.
Cc: stable@vger.kernel.org
Signed-off-by: Ahsan Atta <ahsan.atta@intel.com>
Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Reviewed-by: Damian Muszynski <damian.muszynski@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Skip the shutdown and restart flow when adf_slot_reset() is entered
for a device that is already down. In that case, leave
ADF_STATUS_RESTARTING clear and let adf_slot_reset() restore PCI
function state without calling adf_dev_up(), re-enabling SR-IOV, or
sending restarted notifications.
This is in preparation for adding reset_prepare() and reset_done()
callbacks in adf_aer.c.
Cc: stable@vger.kernel.org
Signed-off-by: Ahsan Atta <ahsan.atta@intel.com>
Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
QAT driver currently toggles PCI bus mastering in multiple places
(probe paths, and reset callbacks). This makes BME state depend on
call ordering and on what PCI command bits were captured in saved PCI
config state.
Make BME control explicit and deterministic:
- remove pci_set_master() from device-specific probe paths
- add adf_set_bme() and call it from adf_dev_init() so BME is enabled
at one point before device bring-up
- drop redundant pci_set_master() and pci_clear_master from adf_aer.c
and rely on the unified init path for BME enablement
This is in preparation for adding reset_prepare() and reset_done()
hooks. In the PCI reset callback flow, the PCI core saves and
restores device configuration state around reset_prepare() and
reset_done(). This change is needed to ensure that we are able to
properly shutdown or reinitialize the device post sysfs triggered
resets.
Cc: stable@vger.kernel.org
Signed-off-by: Ahsan Atta <ahsan.atta@intel.com>
Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Suggested-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Send fatal error notifications to subsystems and VFs as soon as
AER error detection starts, before entering the reset preparation
shutdown sequence.
This reduces notification latency and ensures peers are informed
immediately on fatal detection, rather than after restart-state setup
and arbitration teardown.
Cc: stable@vger.kernel.org
Signed-off-by: Ahsan Atta <ahsan.atta@intel.com>
Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Reviewed-by: Damian Muszynski <damian.muszynski@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
When a reset is triggered via sysfs, the PCI core invokes the
reset_prepare() callback while holding pci_dev_lock(), which includes
the PCI configuration space access semaphore. If reset_prepare() calls
adf_dev_down(), the call chain adf_dev_stop() -> adf_disable_sriov()
-> pci_disable_sriov() attempts to acquire the same semaphore,
resulting in a deadlock.
Avoid this by skipping pci_disable_sriov() when ADF_STATUS_RESTARTING
is set. During reset the PCI topology is preserved, so VF devices
remain valid and enumerated across the reset. VF notification and the
quiesce handshake via adf_pf2vf_notify_restarting() are still
performed unconditionally so that VFs stop submitting work before the
PF shuts down.
Correspondingly, skip pci_enable_sriov() in adf_enable_sriov() when
VFs are already present, since their PCI devices were preserved from
before the restart.
This is in preparation for adding reset_prepare() and reset_done()
callbacks in adf_aer.c.
Cc: stable@vger.kernel.org
Signed-off-by: Ahsan Atta <ahsan.atta@intel.com>
Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Reviewed-by: Damian Muszynski <damian.muszynski@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The VF2PF interrupt handler queues PF-side response work that stores a
raw pointer to per-VF state (struct adf_accel_vf_info). Currently,
adf_disable_sriov() destroys per-VF mutexes and frees vf_info without
stopping new VF2PF work or waiting for in-flight workers to complete. A
concurrently scheduled or already queued worker can then dereference
freed memory.
This manifests as a use-after-free when KASAN is enabled:
BUG: KASAN: null-ptr-deref in mutex_lock+0x76/0xe0
Write of size 8 at addr 0000000000000260 by task kworker/24:2/...
Workqueue: qat_pf2vf_resp_wq adf_iov_send_resp [intel_qat]
Call Trace:
kasan_report+0x119/0x140
mutex_lock+0x76/0xe0
adf_gen4_pfvf_send+0xd4/0x1f0 [intel_qat]
adf_recv_and_handle_vf2pf_msg+0x290/0x360 [intel_qat]
adf_iov_send_resp+0x8c/0xe0 [intel_qat]
process_one_work+0x6ac/0xfd0
worker_thread+0x4dd/0xd30
kthread+0x326/0x410
ret_from_fork+0x33b/0x670
Add a PF-local flag, vf2pf_disabled, that gates work queueing, worker
processing, and interrupt re-enabling during teardown. Set this flag
atomically with the hardware interrupt mask inside
adf_disable_all_vf2pf_interrupts(). After masking, synchronize the AE
cluster MSI-X interrupt and flush the PF response workqueue before
tearing down per-VF locks and state so all in-flight work completes
before vf_info is destroyed.
Introduce adf_enable_all_vf2pf_interrupts() to clear the flag and
unmask all VF2PF interrupts under the same lock when SR-IOV is
re-enabled. This ensures the software flag and hardware state transition
atomically on both the enable and disable paths.
Cc: stable@vger.kernel.org
Fixes: ed8ccaef52 ("crypto: qat - Add support for SRIOV")
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Reviewed-by: Ahsan Atta <ahsan.atta@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The carry flag calculation fails when r01.m_high is saturated
(0xFFFFFFFFFFFFFFFF) and addition of lower bits overflows.
The condition (r01.m_high < product.m_high) doesn't handle the case
where r01.m_high == product.m_high and an additional carry exists
from lower-bit overflow.
When commit 3c4b23901a ("crypto: ecdh - Add ECDH software support")
introduced crypto/ecc.c, it split the muladd() function in the
micro-ecc library into separate mul_64_64() and add_128_128() helpers.
It seems the check got lost in translation.
Add proper handling for this boundary by accounting for the carry
from the lower addition.
Fixes: 3c4b23901a ("crypto: ecdh - Add ECDH software support")
Signed-off-by: Anastasia Tishchenko <sv3iry@gmail.com>
Cc: stable@vger.kernel.org # v4.8+
Reviewed-by: Lukas Wunner <lukas@wunner.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
In-tree drivers do not need MODULE_VERSION as the kernel release
identifies the version of their code. The static version "0.6.0", which
the QAT drivers currently report, can be misleading as it might suggest
the drivers are outdated.
Remove MODULE_VERSION() from all QAT driver modules and the related
ADF_DRV_VERSION, ADF_MAJOR_VERSION, ADF_MINOR_VERSION and
ADF_BUILD_VERSION macros from adf_common_drv.h.
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Reviewed-by: Ahsan Atta <ahsan.atta@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Replace two consecutive min() calls with min3() to simplify the code.
And since count is unsigned and cannot be less than zero, adjust the if
check and update the comment accordingly.
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Use max() to simplify mv_cesa_probe() and improve its readability.
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Now that the character device and IOCTL interface have been removed,
adf_ctl_drv.c only contains module_init/module_exit hooks. Rename it
to adf_module.c to better reflect its purpose and rename the init/exit
functions accordingly.
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Reviewed-by: Ahsan Atta <ahsan.atta@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The QAT driver exposes a character device (qat_adf_ctl) with IOCTLs
for device configuration, start, stop, status query and enumeration.
These IOCTLs are not part of any public uAPI header and have no known
in-tree or out-of-tree users. Device lifecycle is already managed via
sysfs.
The ioctl interface also increases the attack surface and is the
subject of a number of bug reports.
Remove the character device, the IOCTL definitions, and the related
data structures (adf_dev_status_info, adf_user_cfg_key_val,
adf_user_cfg_section, adf_user_cfg_ctl_data). Drop the now-unused
adf_cfg_user.h header and strip adf_ctl_drv.c down to the minimal
module_init/module_exit hooks for workqueue, AER, and crypto/compression
algorithm registration.
Clean up leftover dead code that was only reachable from the removed
IOCTL paths: adf_cfg_del_all(), adf_devmgr_verify_id(),
adf_devmgr_get_num_dev(), adf_devmgr_get_dev_by_id(),
adf_get_vf_real_id() and the unused ADF_CFG macros.
Additionally, drop the entry associated to QAT IOCTLs in
ioctl-number.rst.
Cc: stable@vger.kernel.org
Fixes: d8cba25d2c ("crypto: qat - Intel(R) QAT driver framework")
Reported-by: Zhi Wang <wangzhi@stu.xidian.edu.cn>
Reported-by: Bin Yu <byu@xidian.edu.cn>
Reported-by: MingYu Wang <w15303746062@163.com>
Closes: https://lore.kernel.org/all/61d6d499.ab89.19b9b7f3186.Coremail.wangzhi_xd@stu.xidian.edu.cn/
Link: https://lore.kernel.org/all/20260508034841.256794-1-w15303746062@163.com/
Link: https://lore.kernel.org/all/20260508023542.256299-1-w15303746062@163.com/
Link: https://lore.kernel.org/all/20260504025120.98242-1-w15303746062@163.com/
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Reviewed-by: Ahsan Atta <ahsan.atta@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Lower the priority of HiSilicon's crypto implementations to allow more
suitable alternatives to be selected. For example, certain kernel
use-cases do not benefit from HiSilicon's symmetric crypto algorithms.
This change ensures that more appropriate options are chosen first while
retaining HiSilicon's implementations as alternatives.
Signed-off-by: lizhi <lizhi206@huawei.com>
Signed-off-by: Chenghai Huang <huangchenghai2@huawei.com>
Reviewed-by: Longfang Liu <liulongfang@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
krb5_aead_encrypt(), krb5_aead_decrypt() in rfc3961_simplified.c and
rfc8009_encrypt(), rfc8009_decrypt() in rfc8009_aes2.c set a NULL
completion callback and treat any negative return from
crypto_aead_{encrypt,decrypt}() as terminal, falling through to
kfree_sensitive(buffer). When the encrypt_name resolves to an
async AEAD instance the request returns -EINPROGRESS, the buffer
is freed while the backend's worker still holds a pointer, and the
worker dereferences the freed slab on completion.
KASAN report under UML+SLUB with a synthetic async aead backend
bound to krb5->encrypt_name:
BUG: KASAN: slab-use-after-free in t5_stub_complete+0x7d/0xc7
The helpers were written synchronously, so filter the async
instances out at allocation time instead of plumbing
crypto_wait_req() through every call site.
Reachable via net/rxrpc/rxgk.c, fs/afs/cm_security.c and
net/ceph/crypto.c on systems with an async AEAD provider bound to
the krb5 enctype name.
Fixes: 00244da40f ("crypto/krb5: Implement the Kerberos5 rfc3961 encrypt and decrypt functions")
Fixes: 6c3c0e86c2 ("crypto/krb5: Implement the AES enctypes from rfc8009")
Cc: stable@vger.kernel.org
Suggested-by: Herbert Xu <herbert@gondor.apana.org.au>
Assisted-by: Claude:claude-opus-4-7
Signed-off-by: Michael Bommarito <michael.bommarito@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Document True Random Number Generator on Qualcomm Nord SoC.
Signed-off-by: Deepti Jaggi <deepti.jaggi@oss.qualcomm.com>
Signed-off-by: Shawn Guo <shengchao.guo@oss.qualcomm.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Drop the CONFIG_OF preprocessor guard and remove of_match_ptr() because
OF matching is stubbed out when CONFIG_OF=n.
Reformat atmel_ecc_dt_ids for consistency.
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Since MODULE_DEVICE_TABLE() keeps atmel_sha204a_dt_ids referenced, drop
the unnecessary __maybe_unused annotation. Also remove of_match_ptr()
because OF matching is stubbed out when CONFIG_OF=n.
Reformat atmel_sha204a_dt_ids to silence a checkpatch error and
atmel_sha204a_id for consistency.
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Use designated initializers for the report structs instead of clearing
the struct with memset() and then copying fixed strings with strscpy()
at runtime.
This keeps the structs zero-initialized, lets the compiler diagnose
oversized string literals, and makes the code easier to read.
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The memory allocated for priv in safexcel_pci_probe() is not freed in the
error paths, as well as in the PCI remove function. Fix this by using
device managed allocation.
Fixes: 625f269a5a ("crypto: inside-secure - add support for PCI based FPGA development board")
Signed-off-by: Abdun Nihaal <nihaal@cse.iitm.ac.in>
Reviewed-by: Antoine Tenart <atenart@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
When meson_allocate_chanlist() fails after a partial allocation, it already
unwinds the allocated chanlist state through its local error path.
meson_crypto_probe() then jump to error_flow and calls
meson_free_chanlist() again, causing the same per-flow resources to be torn
down twice. In the reproduced failure path, the second teardown
re-entered crypto_engine_exit() on an already destroyed worker and KASAN
reported a slab-use-after-free in kthread_destroy_worker().
Prevent double-free by handling partial allocation failures locally within
meson_allocate_chanlist() and skipping the outer cleanup path.
The bug was first flagged by an experimental analysis tool we are
developing for kernel memory-management bugs while analyzing
v6.13-rc1. The tool is still under development and is not yet publicly
available.
The bug was reproduced in a QEMU x86_64 guest booted with KASAN on v7.1,
using the reproducer under tools/testing/meson_crypto_probe. The reproducer
forces the second dma_alloc_attrs() call in the gxl-crypto probe path to
return NULL, making meson_allocate_chanlist() fail after partial
initialization. On the unpatched kernel this reliably triggered a
slab-use-after-free. With this fix applied, the same reproducer no longer
emits any KASAN report and the probe fails cleanly with -ENOMEM.
==================================================================
BUG: KASAN: slab-use-after-free in kthread_destroy_worker+0xb2/0xd0
Read of size 8 at addr ff1100010c057a68 by task insmod/265
CPU: 1 UID: 0 PID: 265 Comm: insmod Tainted: G O 7.1.0-rc2-00376-g810af9adc907-dirty #10 PREEMPT(lazy)
Tainted: [O]=OOT_MODULE
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.15.0-1 04/01/2014
Call Trace:
<TASK>
dump_stack_lvl+0x68/0xa0
print_report+0xcb/0x5e0
? __virt_addr_valid+0x21d/0x3f0
? kthread_destroy_worker+0xb2/0xd0
? kthread_destroy_worker+0xb2/0xd0
kasan_report+0xca/0x100
? kthread_destroy_worker+0xb2/0xd0
kthread_destroy_worker+0xb2/0xd0
meson_crypto_probe+0x4d0/0xc10 [amlogic_gxl_crypto]
platform_probe+0x99/0x140
really_probe+0x1c6/0x6a0
? __pfx___device_attach_driver+0x10/0x10
__driver_probe_device+0x248/0x310
? acpi_driver_match_device+0xb0/0x100
driver_probe_device+0x48/0x210
? __pfx___device_attach_driver+0x10/0x10
__device_attach_driver+0x160/0x320
bus_for_each_drv+0x104/0x190
? __pfx_bus_for_each_drv+0x10/0x10
? _raw_spin_unlock_irqrestore+0x2c/0x50
__device_attach+0x19d/0x3b0
? __pfx___device_attach+0x10/0x10
? do_raw_spin_unlock+0x53/0x220
device_initial_probe+0x78/0xa0
bus_probe_device+0x5b/0x130
device_add+0xcfd/0x1430
? __pfx_device_add+0x10/0x10
? insert_resource+0x34/0x50
? lock_release+0xc9/0x290
platform_device_add+0x24e/0x590
? __pfx_meson_crypto_probe_repro_init+0x10/0x10 [meson_crypto_probe_repro]
meson_crypto_probe_repro_init+0x330/0xff0 [meson_crypto_probe_repro]
do_one_initcall+0xc0/0x450
? __pfx_do_one_initcall+0x10/0x10
? _raw_spin_unlock_irqrestore+0x2c/0x50
? __create_object+0x59/0x80
? kasan_unpoison+0x27/0x60
do_init_module+0x27b/0x7d0
? __pfx_do_init_module+0x10/0x10
? kasan_quarantine_put+0x84/0x1d0
? kfree+0x32c/0x510
? load_module+0x561e/0x5ff0
load_module+0x54fe/0x5ff0
? __pfx_load_module+0x10/0x10
? security_file_permission+0x20/0x40
? kernel_read_file+0x23d/0x6e0
? mmap_region+0x235/0x4a0
? __pfx_kernel_read_file+0x10/0x10
? __file_has_perm+0x2c0/0x3e0
init_module_from_file+0x158/0x180
? __pfx_init_module_from_file+0x10/0x10
? __lock_acquire+0x45a/0x1ba0
? idempotent_init_module+0x315/0x610
? lock_release+0xc9/0x290
? lockdep_init_map_type+0x4b/0x220
? do_raw_spin_unlock+0x53/0x220
idempotent_init_module+0x330/0x610
? __pfx_idempotent_init_module+0x10/0x10
? __pfx_cred_has_capability.isra.0+0x10/0x10
? ksys_mmap_pgoff+0x385/0x520
__x64_sys_finit_module+0xbe/0x120
do_syscall_64+0x115/0x690
entry_SYSCALL_64_after_hwframe+0x77/0x7f
RIP: 0033:0x7f7d6d31690d
Code: 5b 41 5c c3 66 0f 1f 84 00 00 00 00 00 f3 0f 1e fa 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d f3 b4 0f 00 f7 d8 >
RSP: 002b:00007fffc027ac68 EFLAGS: 00000246 ORIG_RAX: 0000000000000139
RAX: ffffffffffffffda RBX: 000055f7b81967c0 RCX: 00007f7d6d31690d
RDX: 0000000000000000 RSI: 000055f79a0d6cd2 RDI: 0000000000000003
RBP: 0000000000000000 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000003 R11: 0000000000000246 R12: 000055f79a0d6cd2
R13: 000055f7b8196790 R14: 000055f79a0d5888 R15: 000055f7b81968e0
</TASK>
Fixes: 48fe583fe5 ("crypto: amlogic - Add crypto accelerator for amlogic GXL")
Cc: stable@vger.kernel.org
Signed-off-by: Zilin Guan <zilin@seu.edu.cn>
Signed-off-by: Dawei Feng <dawei.feng@seu.edu.cn>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
platform_get_resource and devm_ioremap effectively open codes this.
The return type of devm_platform_ioremap_resource() is also nice as it
has multiple errors that it can return.
Because it internally calls devm_request_mem_region(), reg values and
sizes cannot overlap. This was manually verified to be the case for all
talitos users.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The problem described in commit 655ef638a2 ("crypto: talitos - fix
SEC1 32k ahash request limitation") also apply for the SEC2 hardware,
but with a limitation of 64k - 1 bytes.
Split ahash_done() into SEC1 and SEC2 paths: SEC1 continues to free the
whole descriptor list at once, while SEC2 now iterates through
descriptors one by one, submitting the next only after the previous
completes, which is required since SEC2 cannot chain descriptors in
hardware.
Cc: stable@vger.kernel.org
Fixes: c662b043cd ("crypto: af_alg/hash: Support MSG_SPLICE_PAGES")
Signed-off-by: Paul Louvel <paul.louvel@bootlin.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
ahash_process_req() was a wrapper used in commit 655ef638a2 ("crypto:
talitos - fix SEC1 32k ahash request limitation"). Rename
ahash_process_req_one() to ahash_process_req() and remove the wrapper.
Cc: stable@vger.kernel.org
Signed-off-by: Paul Louvel <paul.louvel@bootlin.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
In talitos_ahash_req_ctx and talitos_export_state, the fields
first_desc and last_desc describe request-level (not descriptor-level)
state. Rename them to first_request and last_request for clarity.
last_desc is also removed from talitos_ahash_req_ctx as it is no
longer used.
Cc: stable@vger.kernel.org
Signed-off-by: Paul Louvel <paul.louvel@bootlin.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Now that SEC1 hash uses hardware descriptor chaining instead of a
workqueue to process requests exceeding TALITOS1_MAX_DATA_LEN, the
workqueue code is no longer needed.
Remove sec1_ahash_process_remaining(), the related fields from
talitos_ahash_req_ctx (request_bufsl, areq, request_sl,
remaining_ahash_request_bytes, current_ahash_request_bytes,
sec1_ahash_process_remaining), the dead code in ahash_done(), and
simplify ahash_process_req() to call ahash_process_req_one() directly
with the original areq->src and areq->nbytes.
Cc: stable@vger.kernel.org
Signed-off-by: Paul Louvel <paul.louvel@bootlin.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Rework the SEC1 ahash implementation to build a chain of hardware
descriptors, replacing the previous approach of submitting one
descriptor at a time via a workqueue, introduced by commit 655ef638a2
("crypto: talitos - fix SEC1 32k ahash request limitation").
Introduce ahash_process_req_prepare() which iterates over the request
data, allocating enough descriptors to cover the entire ahash request.
The new fields (bufsl, src, first, last) are added to talitos_edesc for
this purpose.
common_nonsnoop_hash() no longer calls talitos_submit(); it only
maps and sets up the descriptor. Submission is now done by the caller
after the chain is built.
ahash_free_desc_list_from() takes over calling
common_nonsnoop_hash_unmap() for each descriptor during cleanup.
Compared to the workqueue based solution, request are slightly faster
since there is no more scheduling latency induced by the workqueue, and
only one interrupt is generated by the device at the end of a chain.
Commit 655ef638a2 ("crypto: talitos - fix SEC1 32k ahash request
limitation") :
$ /usr/libexec/libkcapi/sha256sum ./test_5M.bin
013c5609d63c... ./test_5M.bin
real 0m 0.41s
user 0m 0.01s
sys 0m 0.07s
Now :
$ /usr/libexec/libkcapi/sha256sum ./test_5M.bin
013c5609d63c... ./test_5M.bin
real 0m 0.33s
user 0m 0.01s
sys 0m 0.20s
Tested on a system with an MPC885 SoC featuring the SEC1 Lite.
The increase in sys time is due to the fact that commit 37b5e8897e
("crypto: talitos - chain in buffered data for ahash on SEC1") can no
longer be applied.
Cc: stable@vger.kernel.org
Signed-off-by: Paul Louvel <paul.louvel@bootlin.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Currently, when SEC1 has buffered data (nbuf != 0), the ahash code
creates an additional descriptor on the fly inside
common_nonsnoop_hash() to handle the remainder of the data. This
approach is incompatible with the arbitrary-length descriptor chaining
that follows.
Remove the "additional descriptor" logic from common_nonsnoop_hash()
and common_nonsnoop_hash_unmap().
Also remove the nbytes adjustment for SEC1 in ahash_edesc_alloc()
that subtracted nbuf.
Cc: stable@vger.kernel.org
Signed-off-by: Paul Louvel <paul.louvel@bootlin.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
