An unprivileged local user can pin a host CPU indefinitely in
l2tp_session_get_by_ifname() by issuing L2TP_CMD_SESSION_GET on
L2TP_ATTR_IFNAME concurrently with L2TP_CMD_SESSION_CREATE and
L2TP_CMD_SESSION_DELETE on the same tunnel. All three commands take
GENL_UNS_ADMIN_PERM, so CAP_NET_ADMIN in the netns user namespace
suffices; on any host that has l2tp_core loaded the trigger is
reachable from a standard `unshare -Urn` sandbox.
l2tp_session_unhash() removes a session from tunnel->session_list
with list_del_init(), but that list is walked by
l2tp_session_get_by_ifname() with list_for_each_entry_rcu() under
rcu_read_lock_bh(). list_del_init() leaves the deleted entry's
next/prev self-pointing; a reader that has loaded the entry and
then advances pos->list.next reads &session->list, container_of()s
back to the same session, and list_for_each_entry_rcu() never
reaches the list head. The CPU stays in strcmp() inside the
walker, with BH and preemption disabled, so RCU grace periods on
the host stall behind it and the wedged thread cannot be killed
(SIGKILL is delivered on syscall return).
Use list_del_rcu() to match the existing list_add_rcu() in
l2tp_session_register(); the deleted session remains visible to
in-flight walkers with consistent next/prev pointers until
kfree_rcu() in l2tp_session_free() releases it. tunnel->session_list
has exactly one list_del_init() call site; the list_del_init
(&session->clist) at l2tp_core.c:533 operates on the per-collision
list, which is not walked under RCU. list_empty(&session->list) is
not used anywhere in net/l2tp/ after the unhash point, so dropping
the post-delete self-init is safe; the fix has no userspace-visible
behavior change.
Fixes: 89b768ec2d ("l2tp: use rcu list add/del when updating lists")
Cc: stable@vger.kernel.org # 6.11+
Signed-off-by: Michael Bommarito <michael.bommarito@gmail.com>
Link: https://patch.msgid.link/20260518183447.64078-1-michael.bommarito@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The ff-a firmware driver gets 11 individual bugfixes for a number
of issues with robustness to buggy firmware or client implementations.
Another firmware fix address suspend to RAM via PSCI firmware.
The final code change is for the old Arm Integrator reference
platform that recently started exposing an old NULL pointer
dereference bug.
The MAINTAINERS file gets two updates, notably James Tai and Yu-Chun
Lin are stepping up as co-maintainers for the Realtek platform.
The remaining patches are all for devicetree files. Two of these
are for riscv boards, the rest are all for enesas Arm platforms,
addressing build time checking issues as well as minor configuration
problems.
-----BEGIN PGP SIGNATURE-----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=MpIJ
-----END PGP SIGNATURE-----
Merge tag 'soc-fixes-7.1' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull SoC fixes from Arnd Bergmann:
- The ff-a firmware driver gets 11 individual bugfixes for a number of
issues with robustness to buggy firmware or client implementations.
Another firmware fix address suspend to RAM via PSCI firmware.
- The final code change is for the old Arm Integrator reference
platform that recently started exposing an old NULL pointer
dereference bug.
- The MAINTAINERS file gets two updates, notably James Tai and Yu-Chun
Lin are stepping up as co-maintainers for the Realtek platform.
- The remaining patches are all for devicetree files. Two of these are
for riscv boards, the rest are all for enesas Arm platforms,
addressing build time checking issues as well as minor configuration
problems.
* tag 'soc-fixes-7.1' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (30 commits)
firmware: psci: Set pm_set_resume/suspend_via_firmware() for SYSTEM_SUSPEND
ARM: realtek: MAINTAINERS: Include pin controller drivers
MAINTAINERS: Add maintainers for ARM/REALTEK ARCHITECTURE
ARM: integrator: Fix early initialization
firmware: arm_ffa: Fix sched-recv callback partition lookup
firmware: arm_ffa: Snapshot notifier callbacks under lock
firmware: arm_ffa: Align RxTx buffer size before mapping
firmware: arm_ffa: Validate framework notification message layout
firmware: arm_ffa: Keep framework RX release under lock
firmware: arm_ffa: Bound PARTITION_INFO_GET_REGS copies
firmware: arm_ffa: Unregister bus notifier on teardown for FF-A v1.0
firmware: arm_ffa: Fix per-vcpu self notifications handling in workqueue
firmware: arm_ffa: Avoid collapsing NPI work from different CPUs
firmware: arm_ffa: Skip free_pages on RX buffer alloc failure
firmware: arm_ffa: Check for NULL FF-A ID table while driver registration
riscv: dts: microchip: fix icicle i2c pinctrl configuration
riscv: dts: starfive: jh7110: Drop CAMSS node
arm64: dts: renesas: r9a09g056: Add #mux-state-cells to usb20phyrst
arm64: dts: renesas: r9a09g057: Add #mux-state-cells to usb2{0,1}phyrst
ARM: dts: renesas: rskrza1: Drop superfluous cells
...
Setting RBUF_EEE_EN | RBUF_PM_EN in RBUF_ENERGY_CTRL breaks the RX
path on GENET hardware once MAC EEE becomes active. RX traffic stops
flowing while the link stays up and the usual descriptor/RX error
counters remain quiet. In that state the MAC still accepts frames
(rbuf_ovflow_cnt keeps climbing) but RBUF no longer forwards them to
DMA, so rx_packets is no longer incremented at the netdev level. On
some boards the corruption ends up as a paging fault in
skb_release_data via bcmgenet_rx_poll on an LPI exit.
Reproduced on Pi 4B (BCM2711 + BCM54213PE) and confirmed by Florian
Fainelli on an internal Broadcom 4908-family board with the same crash
signature. RBUF_PM_EN is not publicly documented.
This shows up more often now that phy_support_eee() enables EEE by
default, but it also affects older kernels as soon as TX LPI is
turned on via ethtool, so it is not specific to recent changes.
Always clear RBUF_EEE_EN | RBUF_PM_EN in bcmgenet_eee_enable_set so
the bits stay off across resets. UMAC and TBUF setup is left alone so
TX-side EEE keeps working.
Link: https://github.com/raspberrypi/linux/issues/7304
Fixes: 6ef398ea60 ("net: bcmgenet: add EEE support")
Cc: stable@vger.kernel.org
Signed-off-by: Nicolai Buchwitz <nb@tipi-net.de>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Link: https://patch.msgid.link/20260520184320.652053-1-nb@tipi-net.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In paths where tracing_map_elt_alloc() failed to allocate objects,
the map->ops->elt_alloc() call was never successful. In this case,
map->ops->elt_free() should not be called.
Link: https://sashiko.dev/#/patchset/20260520223101.34710-1-rosenp%40gmail.com
Cc: stable@vger.kernel.org
Cc: Tom Zanussi <tom.zanussi@linux.intel.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Rosen Penev <rosenp@gmail.com>
Reported-by: Sashiko <sashiko-bot@kernel.org>
Fixes: 2734b62952 ("tracing: Add per-element variable support to tracing_map")
Link: https://patch.msgid.link/177933895460.108746.5396070821443932634.stgit@devnote2
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Maciej W. Rozycki says:
====================
ethernet: 3c509: Bring driver back and make some fixes
As per the previous discussions[1][2] this patch series brings the 3c509
driver back. Picking up net rather than net-next as I consider it a fix
to accidental removal and so that any downstream users do not suffer from
disruption when using released kernels.
In the course of making the coding style changes requested I have come
across an actual bug in transceiver type selection code, where the old
setting is not masked out before ORing in the new one, causing no change
to be actually made in a requested transition from BNC to AUI. I guess
this code must have been executed exceedingly rarely, as it's always been
wrong ever since it was added in 2.5.42 back in 2002.
Therefore I find it not worth backporting to stable branches, however for
the sake of appropriateness, in case someone downstream does want to have
the fix, I chose to apply it second in the series, right after the actual
revert and before code clean-ups.
The remaining patches of the series should be obvious; see the respective
commit descriptions for details.
[1] "drivers: net: 3com: 3c509: Remove this driver",
<https://lore.kernel.org/r/alpine.DEB.2.21.2604240004280.28583@angie.orcam.me.uk/>.
[2] "MAINTAINERS: Add self for the 3c509 network driver",
<https://lore.kernel.org/r/alpine.DEB.2.21.2604271056460.28583@angie.orcam.me.uk/>.
====================
Link: https://patch.msgid.link/alpine.DEB.2.21.2605201115010.1450@angie.orcam.me.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Update the driver for our current coding style according to output from
`checkpatch.pl' and manual code review, where no change to binary code
results, as indicated by `objdump -dr'. Exceptions are as follows:
- incomplete reverse xmas tree in set_multicast_list(), as that would
change binary output,
- referring el3_start_xmit() verbatim rather than via `__func__' with
pr_debug(), likewise,
- a bunch of pr_cont() calls, likewise,
- a long udelay() call in el3_netdev_set_ecmd() made under a spinlock,
likewise plus it's not eligible for conversion to a sleep in the first
place,
- a blank line at the start of a block in el3_interrupt(), to improve
readability where the first statement would otherwise visually merge
with the controlling expression of the enclosing `while' statement.
These issues are benign and depending on circumstances may be adressed
with suitable code refactoring later on.
Signed-off-by: Maciej W. Rozycki <macro@orcam.me.uk>
Link: https://patch.msgid.link/alpine.DEB.2.21.2605201208280.1450@angie.orcam.me.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
There has been apparently a single message only ever publicly posted by
David Ruggiero, back in 2002, which added this documentation piece among
others, and MAINTAINERS was never updated accordingly. It is therefore
doubtful that his maintainer status has actually come into effect. Just
replace the reference then so as not to confuse people.
Signed-off-by: Maciej W. Rozycki <macro@orcam.me.uk>
Link: https://patch.msgid.link/alpine.DEB.2.21.2605201207380.1450@angie.orcam.me.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This driver has landed with Linux 0.99.13k, which was covered by the GNU
General Public License version 2, and no further conditions as to
licensing terms have been specified within the copyright notice included
with the driver itself.
Signed-off-by: Maciej W. Rozycki <macro@orcam.me.uk>
Link: https://patch.msgid.link/alpine.DEB.2.21.2605201206370.1450@angie.orcam.me.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The transceiver type is held in bits 15:14 of the Address Configuration
Register, with the values of 0b00, 0b01, and 0b11 denoting TP, AUI, and
BNC types respectively. Therefore switching from BNC to AUI requires
bits to be cleared before setting bit 14 or the setting won't change.
NB this has always been wrong ever since this code was added in 2.5.42.
Signed-off-by: Maciej W. Rozycki <macro@orcam.me.uk>
Link: https://patch.msgid.link/alpine.DEB.2.21.2605201205160.1450@angie.orcam.me.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This reverts commit 91f3a27ae9.
Contrary to the assumption stated with the original commit description
this driver is in use and I'm going to maintain it for the foreseeable
future.
Signed-off-by: Maciej W. Rozycki <macro@orcam.me.uk>
Link: https://patch.msgid.link/alpine.DEB.2.21.2605201204260.1450@angie.orcam.me.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
A new method ntf_listen_all_nsid() to enable listening on events from
all namespaces. Useful for testing cross-namespace functionality.
recv() replaced with recvmsg() to be able to receive NSID through the
ancillary data.
Signed-off-by: Ilya Maximets <i.maximets@ovn.org>
Link: https://patch.msgid.link/20260520172317.175168-4-i.maximets@ovn.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
skb_gro_receive() can currently copy frags between the source and GRO
skb, without checking the zerocopy status, and in particular the
SKBFL_MANAGED_FRAG_REFS flag.
When SKBFL_MANAGED_FRAG_REFS is set, the skb doesn't hold a reference
on the pages in shinfo->frags. Appending those frags to another skb's
frags without fixing up the page refcount can lead to UAF.
When either the last skb in the GRO chain (the one we would append
frags to) or the source skb is zerocopy, don't merge the skbs.
Fixes: 753f1ca4e1 ("net: introduce managed frags infrastructure")
Reported-by: Huzaifa Sidhpurwala <huzaifas@redhat.com>
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/c3b7f906bbfcbdfd7b4fa9d6c18a438870df85be.1779307748.git.sd@queasysnail.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The driver passes fw_version directly to devlink_info_version_stored_put()
without ensuring null-termination. While current firmware null-terminates
these strings, the driver should not rely on this behavior. Add explicit
null-termination to prevent potential issues if firmware behavior changes.
Fixes: 45d76f4929 ("pds_core: set up device and adminq")
Signed-off-by: Nikhil P. Rao <nikhil.rao@amd.com>
Link: https://patch.msgid.link/20260520205842.1486718-1-nikhil.rao@amd.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reported by Sashiko:
In ipv6_hop_ioam(), the hdr pointer is initialized to point into the
skb's linear data buffer. Later, the code calls skb_ensure_writable(),
which might reallocate the buffer:
if (skb_ensure_writable(skb, optoff + 2 + hdr->opt_len))
goto drop;
/* Trace pointer may have changed */
trace = (struct ioam6_trace_hdr *)(skb_network_header(skb)
+ optoff + sizeof(*hdr));
ioam6_fill_trace_data(skb, ns, trace, true);
ioam6_event(IOAM6_EVENT_TRACE, dev_net(skb->dev),
GFP_ATOMIC, (void *)trace, hdr->opt_len - 2);
If the skb is cloned or lacks sufficient linear headroom,
skb_ensure_writable() will invoke pskb_expand_head(), which reallocates
the skb's data buffer and frees the old one, invalidating pointers to
it. While the code recalculates the trace pointer immediately after the
call to skb_ensure_writable(), it fails to recalculate the hdr pointer.
This patch fixes the above by recalculating the hdr pointer before
passing hdr->opt_len to ioam6_event(), so that we avoid any UaF.
Fixes: f655c78d62 ("net: exthdrs: ioam6: send trace event")
Cc: stable@vger.kernel.org
Signed-off-by: Justin Iurman <justin.iurman@gmail.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Link: https://patch.msgid.link/20260520124242.32320-1-justin.iurman@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In the SIOCGIFHWADDR path, tap_ioctl() copies 16 bytes of an
uninitialised on-stack struct sockaddr_storage to userspace via
ifr_hwaddr, but netif_get_mac_address() only writes sa_family and
dev->addr_len (6 for Ethernet) bytes, leaving sa_data[6..13] uninitialised.
Those 8 trailing bytes leak kernel stack contents; SIOCGIFHWADDR on a
macvtap chardev returns kernel .text and direct-map pointers, defeating
KASLR.
Initialise ss at declaration.
Fixes: 3b23a32a63 ("net: fix dev_ifsioc_locked() race condition")
Reported-by: Xiang Mei <xmei5@asu.edu>
Signed-off-by: Weiming Shi <bestswngs@gmail.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20260520075736.3415676-3-bestswngs@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
If one of the later PF or VF CID bitmap allocations fails,
qed_cid_map_alloc() jumps to cid_map_fail and frees the previously
allocated CID bitmaps before returning an error. qed_cxt_tables_alloc()
then calls qed_cxt_mngr_free(), which invokes qed_cid_map_free()
again.
Fix this by setting each CID bitmap pointer to NULL after bitmap_free()
to avoid double free.
The bug was first flagged by an experimental analysis tool we are
developing for kernel memory-management bugs while analyzing
v6.13-rc1. The tool is still under development and is not yet publicly
available. Manual inspection confirms that the bug is still
present in v7.1-rc3.
Runtime reproduction was not attempted because exercising the failing
allocation path requires device-specific setup.
Fixes: fe56b9e6a8 ("qed: Add module with basic common support")
Cc: stable@vger.kernel.org
Signed-off-by: Zilin Guan <zilin@seu.edu.cn>
Signed-off-by: Dawei Feng <dawei.feng@seu.edu.cn>
Link: https://patch.msgid.link/20260520070323.2762379-1-dawei.feng@seu.edu.cn
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In mana_hwc_rx_event_handler(), rx_req_idx is derived from
sge->address in DMA-coherent memory. In Confidential VMs
(SEV-SNP/TDX), this memory is shared unencrypted and HW can modify
WQE contents at any time. No bounds check exists on rx_req_idx,
which can lead to an out-of-bounds access into reqs[].
Add bounds check on rx_req_idx in mana_hwc_rx_event_handler() before
using it to index the reqs[] array.
Fixes: ca9c54d2d6 ("net: mana: Add a driver for Microsoft Azure Network Adapter (MANA)")
Signed-off-by: Aditya Garg <gargaditya@linux.microsoft.com>
Reviewed-by: Haiyang Zhang <haiyangz@microsoft.com>
Link: https://patch.msgid.link/20260520051553.857120-1-gargaditya@linux.microsoft.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When installing the allmulticast NPC rule, rvu_npc_install_allmulti_entry()
should skip LBK and SDP VFs (only CGX PF/VF may add the entry). The
code combined is_lbk_vf() and is_sdp_vf() with logical AND, which is
never true for a single pcifunc, so the intended early return never ran.
Use logical OR instead.
Cc: Geetha sowjanya <gakula@marvell.com>
Fixes: ae703539f4 ("octeontx2-af: Cleanup loopback device checks")
Signed-off-by: Ratheesh Kannoth <rkannoth@marvell.com>
Link: https://patch.msgid.link/20260520043036.1523798-1-rkannoth@marvell.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
__netpoll_send_skb() always transmits through np->dev and queues busy
packets on np->dev->npinfo->txq, but it leaves skb->dev unchanged.
Stacked callers such as DSA and macvlan can reach netpoll with skb->dev
still naming the upper device while np->dev is the lower device that
owns the netpoll state.
If the skb has to be deferred, queue_process() later dequeues it from
the lower device's txq but retries it through skb->dev. That can
re-enter the upper ndo_start_xmit path on an already transformed skb,
and if the upper device disappears before the lower txq drains the
workqueue can dereference a stale skb->dev pointer.
The buggy scenario involves two paths, with each column showing the
order within that path:
path A label: netpoll enqueue path path B label: upper-device teardown
1. Stacked xmit calls netpoll 1. Teardown unregisters the upper
with lower np->dev and upper net_device while lower npinfo
skb->dev. stays alive.
2. __netpoll_send_skb() uses 2. netdev_release() runs for the
np->dev->npinfo as the txq upper net_device.
owner.
3. Busy transmit queues the skb 3. The lower txq still owns the
on that lower txq with upper deferred skb.
skb->dev.
4. queue_process() drains the 4. queue_process() dereferences
lower txq and reads skb->dev. that stale upper skb->dev.
Normalize skb->dev to np->dev after loading np->dev from the netpoll
instance, before either the direct transmit path or the fallback enqueue.
This keeps the queued skb in the same device and txq domain as the
netpoll state that owns it.
KASAN report as below:
KASAN slab-use-after-free in queue_process+0x7c/0x480
Workqueue: events queue_process
The buggy address belongs to the object at ffff88810906c000 which belongs
to the cache kmalloc-4k of size 4096
The buggy address is located 168 bytes inside of freed 4096-byte region
[ffff88810906c000, ffff88810906d000)
Read of size 8
Call trace:
dump_stack_lvl+0x73/0xb0 (?:?)
print_report+0xd1/0x620 (?:?)
srso_alias_return_thunk+0x5/0xfbef5 (?:?)
__virt_addr_valid+0x215/0x420 (?:?)
kasan_complete_mode_report_info+0x64/0x200 (?:?)
kasan_report+0xf7/0x130 (?:?)
queue_process+0x7c/0x480 (net/core/netpoll.c:88)
kasan_check_range+0x10c/0x1c0 (?:?)
__kasan_check_read+0x15/0x20 (?:?)
process_one_work+0x8b7/0x1af0 (kernel/workqueue.c:3200)
assign_work+0x170/0x3f0 (?:?)
worker_thread+0x574/0xf10 (?:?)
_raw_spin_unlock_irqrestore+0x4b/0x60 (?:?)
trace_hardirqs_on+0x2a/0x180 (?:?)
kthread+0x2fc/0x3f0 (?:?)
ret_from_fork+0x58b/0x830 (?:?)
__switch_to+0x58e/0xe90 (?:?)
__switch_to_asm+0x39/0x70 (?:?)
ret_from_fork_asm+0x1a/0x30 (?:?)
Freed by task stack:
kasan_save_stack+0x3d/0x60 (?:?)
kasan_save_track+0x18/0x40 (?:?)
kasan_save_free_info+0x3f/0x60 (?:?)
__kasan_slab_free+0x48/0x70 (?:?)
kfree+0x20e/0x4e0 (?:?)
kvfree+0x31/0x40 (?:?)
netdev_release+0x71/0x90 (net/core/net-sysfs.c:2227)
device_release+0xd2/0x250 (?:?)
kobject_put+0x181/0x4c0 (lib/kobject.c:730)
netdev_run_todo+0x700/0x1000 (net/core/dev.c:11666)
rtnl_dellink+0x396/0xc00 (net/core/rtnetlink.c:3558)
rtnetlink_rcv_msg+0x740/0xc20 (net/core/rtnetlink.c:6897)
netlink_rcv_skb+0x147/0x3a0 (?:?)
rtnetlink_rcv+0x19/0x20 (net/core/rtnetlink.c:7021)
netlink_unicast+0x4d1/0x830 (net/netlink/af_netlink.c:1327)
netlink_sendmsg+0x840/0xe10 (net/netlink/af_netlink.c:1812)
____sys_sendmsg+0x8a7/0xb50 (?:?)
___sys_sendmsg+0x104/0x190 (?:?)
__sys_sendmsg+0x135/0x1d0 (?:?)
__x64_sys_sendmsg+0x7b/0xc0 (?:?)
x64_sys_call+0x205c/0x2130 (?:?)
do_syscall_64+0x115/0x6a0 (arch/x86/entry/syscall_64.c:87)
entry_SYSCALL_64_after_hwframe+0x77/0x7f (?:?)
Fixes: 5de4a473bd ("netpoll queue cleanup")
Signed-off-by: Zhang Cen <rollkingzzc@gmail.com>
Link: https://patch.msgid.link/20260519104647.3517990-1-rollkingzzc@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The memory allocated in ipc_protocol_init() is not freed on the error
paths that follow in ipc_imem_init(). Fix that by calling the
corresponding release function ipc_protocol_deinit() in the error path.
Fixes: 3670970dd8 ("net: iosm: shared memory IPC interface")
Cc: stable@vger.kernel.org
Signed-off-by: Abdun Nihaal <nihaal@cse.iitm.ac.in>
Link: https://patch.msgid.link/20260519062815.55545-1-nihaal@cse.iitm.ac.in
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
We're leaking the initial DMA mapping during iteration if we fail to
allocate the tracking descriptor for both PRP and SGL. Unmap the
iterator directly; we can't use the existing unmap helper because it
depends on the tracking descriptor being successfully allocated, so a
new one for an in-use iterator is provided.
The mappings were also leaking when the driver detects an invalid
bio_vec when mapping PRPs, so fix that too.
Fixes: b8b7570a7e ("nvme-pci: fix dma unmapping when using PRPs and not using the IOVA mapping")
Fixes: 7ce3c1dd78 ("nvme-pci: convert the data mapping to blk_rq_dma_map")
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
We don't unmap P2P memory, so we don't need to track it. The dma_vec
allocation was getting leaked on the completion.
Fixes: b8b7570a7e ("nvme-pci: fix dma unmapping when using PRPs and not using the IOVA mapping")
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Since I am moving from Pengutronix update my email address for the
ARCNET subsystems to point to my kernel.org address.
Also update .mailmap.
Signed-off-by: Michael Grzeschik <mgr@kernel.org>
Acked-by: Jakub Kicinski <kuba@kernel.org>
Acked-by: Markus Schneider-Pargmann <mail@markussp.com>
Link: https://patch.msgid.link/20260521-maintainer-v1-1-29b5e106682d@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
We X-out net/bluetooth/ from "NETWORKING [GENERAL]" so that only
the dedicated list is CCed on patches, and networking gets them
once already processed by Luiz. We missed include/net/bluetooth.
Link: https://patch.msgid.link/20260521004151.625049-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Data adjustment cases failed with "Data exchange failed" when using IPv4
because the program did not update the IP and UDP checksums in the IPv4
branch. The issue was masked when both IPv4 and IPv6 were configured,
since the test harness prefers IPv6.
While here, generalize csum_fold_helper() to fold twice so it works for
any 32-bit input.
Fixes: 0b65cfcef9 ("selftests: drv-net: Test tail-adjustment support")
Reviewed-by: Carolina Jubran <cjubran@nvidia.com>
Reviewed-by: Dragos Tatulea <dtatulea@nvidia.com>
Signed-off-by: Nimrod Oren <noren@nvidia.com>
Link: https://patch.msgid.link/20260520153928.3371765-1-noren@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
ip6_route_init() registers ip6_route_dev_notifier before registering the
IPv6 route BPF iterator target. If bpf_iter_register() fails after the
notifier has been registered, the error path currently jumps to
out_register_late_subsys and unwinds the RTNL handlers and pernet route
state without removing the notifier from the netdevice notifier chain.
This leaves ip6_route_dev_notify() callable after the IPv6 route state it
uses has been torn down. Add a separate unwind label for the BPF iterator
failure path and unregister the netdevice notifier before continuing with
the existing cleanup.
Fixes: 138d0be35b ("net: bpf: Add netlink and ipv6_route bpf_iter targets")
Signed-off-by: Yuho Choi <dbgh9129@gmail.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Link: https://patch.msgid.link/20260520030329.1061183-1-dbgh9129@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The run.sh script explicitly checks that CONFIG_MODULES is disabled.
By default, this config option is enabled. Explicitly disable it to be
able to run the RDS tests.
Note that writing '# CONFIG_(...) is not set' is usually recommended to
disable an option in the .config, but it looks like selftests usually
set 'CONFIG_(...)=n', which looks clearer.
Fixes: 0f5d680047 ("selftests: rds: add tools/testing/selftests/net/rds/config")
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Reviewed-by: Allison Henderson <achender@kernel.org>
Link: https://patch.msgid.link/20260520-net-rds-config-modules-v1-1-2100df02fe9a@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The networking receive path is usually run from softirq context, but
protocols that take the socket lock may have packets stored in the
backlog and processed later from process context. In that case
release_sock() -> __release_sock() drops the slock with spin_unlock_bh()
and then calls sk->sk_backlog_rcv() with bottom halves enabled.
Typical sk_backlog_rcv handlers process the socket whose backlog is
being drained, so the BH state at entry is irrelevant for the slocks
they touch. pep_do_rcv() is different: when the inbound skb targets an
existing PEP pipe, it forwards the skb to a different *child* socket
via sk_receive_skb(). That helper takes the child slock with
bh_lock_sock_nested(), which is just spin_lock_nested() and assumes BH
is already off. The same child slock therefore ends up acquired with
BH on (process path) and with BH off (softirq path):
process context softirq context
--------------- ---------------
release_sock(listener) __netif_receive_skb()
__release_sock() phonet_rcv()
spin_unlock_bh() __sk_receive_skb(listener)
[BH now ENABLED] [BH already disabled]
sk_backlog_rcv: sk_backlog_rcv:
pep_do_rcv() pep_do_rcv()
sk_receive_skb(child) sk_receive_skb(child)
bh_lock_sock_nested(child) bh_lock_sock_nested(child)
=> SOFTIRQ-ON-W => IN-SOFTIRQ-W
Lockdep flags this as inconsistent lock state, and it can become a real
self-deadlock if a softirq on the same CPU tries to receive to the same
child socket while its slock is held in the BH-enabled path:
WARNING: inconsistent lock state
inconsistent {SOFTIRQ-ON-W} -> {IN-SOFTIRQ-W} usage.
(slock-AF_PHONET/1){+.?.}-{3:3}, at: __sk_receive_skb+0x1cf/0x900
__sk_receive_skb net/core/sock.c:563
sk_receive_skb include/net/sock.h:2022 [inline]
pep_do_rcv net/phonet/pep.c:675
sk_backlog_rcv include/net/sock.h:1190
__release_sock net/core/sock.c:3216
release_sock net/core/sock.c:3815
pep_sock_accept net/phonet/pep.c:879
Wrap the forwarded sk_receive_skb() in local_bh_disable() /
local_bh_enable() so the child slock is always acquired with BH off.
local_bh_disable() nests safely on the softirq path.
Discovered via in-house syzkaller fuzzing; the same root cause also
on the linux-6.1.y syzbot dashboard as extid 44f0626dd6284f02663c.
Reproduced under KASAN + LOCKDEP + PROVE_LOCKING, reproducer:
https://pastebin.com/A3t8xzCR
Fixes: 9641458d3e ("Phonet: Pipe End Point for Phonet Pipes protocol")
Link: https://syzkaller.appspot.com/bug?extid=44f0626dd6284f02663c
Cc: stable@vger.kernel.org
Signed-off-by: Zijing Yin <yzjaurora@gmail.com>
Acked-by: Rémi Denis-Courmont <remi@remlab.net>
Reported-by: syzbot+9f4a135646b66c509935@syzkaller.appspotmail.com
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20260519172635.86304-1-yzjaurora@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Unless smbdirect_connection_legacy_debug_proc_show()
wants to debug-log keep_alive_interval as microseconds,
a magnitude higher precision than available by the way,
keepalive_interval_msec should not be multiplied by 1000.
Fixes: cc55f65dd3 ("smb: client: make use of common smbdirect_socket_parameters")
Reviewed-by: Stefan Metzmacher <metze@samba.org>
Signed-off-by: Alexander A. Klimov <grandmaster@al2klimov.de>
Signed-off-by: Steve French <stfrench@microsoft.com>
Since commit 340cea84f6 ("cifs: open files should not hold ref on
superblock"), cifs file only holds the dentry ref_cnt, the cifs file
close work(cfile->deferred) could be executed after unmounting, which
will trigger a warning in generic_shutdown_super:
BUG: Dentry 00000000a14a6845{i=c,n=file} still in use (1) [unmount of
cifs cifs]
The detailed processs is:
process A process B kworker
fd = open(PATH)
vfs_open
file->__f_path = *path // dentry->d_lockref.count = 1
cifs_open
cifs_new_fileinfo
cfile->dentry = dget(dentry) // dentry->d_lockref.count = 2
close(fd)
__fput
cifs_close
queue_delayed_work(deferredclose_wq, cfile->deferred)
dput(dentry) // dentry->d_lockref.count = 1
smb2_deferred_work_close
_cifsFileInfo_put
list_del(&cifs_file->flist)
umount
cleanup_mnt
deactivate_super
cifs_kill_sb
cifs_close_all_deferred_files_sb
cifs_close_all_deferred_files
// cannot find cfile, skip _cifsFileInfo_put
kill_anon_super
generic_shutdown_super
shrink_dcache_for_umount
umount_check
WARN ! // dentry->d_lockref.count = 1
cifsFileInfo_put_final
dput(cifs_file->dentry)
// dentry->d_lockref.count = 0
Fix it by flushing 'deferredclose_wq' before calling kill_anon_super.
Fetch a reproducer in https://bugzilla.kernel.org/show_bug.cgi?id=221548.
Fixes: 340cea84f6 ("cifs: open files should not hold ref on superblock")
Cc: stable@vger.kernel.org
Reviewed-by: Shyam Prasad N <sprasad@microsoft.com>
Signed-off-by: Zhihao Cheng <chengzhihao1@huawei.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Fix the error message in cs_amp_read_cal_coeff() to say "Failed to read".
It was incorrectly "Failed to write", probably a copy-paste error.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://patch.msgid.link/20260521122511.987322-4-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Rewrite cs_amp_create_debugfs() so that dput() will be called on
a valid dentry returned from debugfs_lookup().
The pointer returned from debugfs_lookup() must be released by dput().
The pointer returned from debugfs_create_dir() does not need to be
passed to dput().
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Fixes: cdd27fa329 ("ASoC: cs-amp-lib: Add helpers for factory calibration")
Link: https://patch.msgid.link/20260521122511.987322-3-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
When calculating data->count replace the incorrect sizeof(data) with use
of struct_offset().
The faulty sizeof(data) was incorrectly calculating the size of the
pointer instead of the size of the struct pointed to. As it happens, both
values are 8 on a 64-bit CPU. In the unlikely event of using this code on
a 32-bit CPU the number of available bytes would be calculated 4 larger
than is actually available.
Instead of changing to sizeof(*data) it has been replaced by
struct_offset() because it has better chance of detecting these sorts of
typos. Also the offset of the data[] array is actually what we want to know
here anyway.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Fixes: 2b62e66626 ("ASoC: cs-amp-lib: Add function to write calibration to UEFI")
Link: https://patch.msgid.link/20260521122511.987322-2-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
adm1266_state_read() backs the sequencer_state debugfs entry and
issues an i2c_smbus_read_word_data(client, ADM1266_READ_STATE)
against the device without taking pmbus_lock. pmbus_core holds
pmbus_lock around its own multi-transaction sequences (notably the
"set PAGE, then read paged register" pattern used by hwmon
attributes), so an unlocked debugfs reader can land between a PAGE
write and the subsequent paged read in another thread. READ_STATE
itself is not paged, so it cannot corrupt PAGE in flight, but the
same defensive serialisation that applies to the GPIO accessors
applies here: any direct device access from outside pmbus_core
should be ordered with respect to pmbus_core's own.
Take pmbus_lock at the top of adm1266_state_read() via the
scope-based guard().
Fixes: ed1ff457e1 ("hwmon: (pmbus/adm1266) add debugfs for states")
Cc: stable@vger.kernel.org
Signed-off-by: Abdurrahman Hussain <abdurrahman@nexthop.ai>
Link: https://lore.kernel.org/r/20260518-adm1266-gpio-fixes-v3-8-e425e4f88139@nexthop.ai
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
adm1266_nvmem_read() is the reg_read callback the NVMEM core invokes
when userspace reads /sys/bus/nvmem/devices/.../nvmem on this chip.
On the first byte of every read it does a memset of data->dev_mem,
walks the device blackbox through adm1266_nvmem_read_blackbox()
(which issues a chain of PMBus block transactions), and then memcpys
the refreshed buffer out to userspace. None of that runs under
pmbus_lock today.
Two consequences:
- The PMBus traffic the refresh issues is not serialised against
pmbus_core's own multi-step PAGE+register sequences. A paged
hwmon attribute read from another thread can land between a
PAGE write and the paged read in either direction and corrupt
one side's view of the device state machine.
- The NVMEM core does not serialise concurrent reg_read calls, so
two userspace readers racing at offset 0 can interleave the
memset of data->dev_mem with another reader's
adm1266_nvmem_read_blackbox() refill or memcpy out, returning
torn data to userspace.
Take pmbus_lock at the top of adm1266_nvmem_read() via the
scope-based guard(). Patch 5 of this series moves
adm1266_config_nvmem() past pmbus_do_probe() so the lock is
guaranteed to be live before the callback is reachable from
userspace.
Fixes: 15609d1893 ("hwmon: (pmbus/adm1266) read blackbox")
Cc: stable@vger.kernel.org
Signed-off-by: Abdurrahman Hussain <abdurrahman@nexthop.ai>
Link: https://lore.kernel.org/r/20260518-adm1266-gpio-fixes-v3-7-e425e4f88139@nexthop.ai
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
adm1266_gpio_get(), adm1266_gpio_get_multiple(), and
adm1266_gpio_dbg_show() all issue PMBus reads against the device but
none of them take pmbus_lock. The pmbus_core framework holds
pmbus_lock around its own multi-transaction sequences (notably the
"set PAGE, then read paged register" pattern used by hwmon
attributes), so an unlocked GPIO accessor can land between a PAGE
write and the subsequent paged read in another thread and corrupt
either side's view of the device state machine.
Take pmbus_lock at the top of each of the three accessors via the
scope-based guard(). The lock is uncontended in the common case and
adds only a single mutex round-trip per call.
Fixes: d98dfad35c ("hwmon: (pmbus/adm1266) Add support for GPIOs")
Cc: stable@vger.kernel.org
Signed-off-by: Abdurrahman Hussain <abdurrahman@nexthop.ai>
Reviewed-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260518-adm1266-gpio-fixes-v3-6-e425e4f88139@nexthop.ai
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
adm1266_probe() calls adm1266_config_nvmem() -- which goes on to
devm_nvmem_register() and exposes adm1266_nvmem_read() to userspace --
before pmbus_do_probe() has initialised the per-client PMBus state.
Same latent hazard as the gpio_chip one fixed in the previous patch:
once the nvmem device is registered, gpiolib's nvmem char-dev / sysfs
interface is reachable, and any concurrent read triggers
adm1266_nvmem_read() -> adm1266_nvmem_read_blackbox(), which issues
PMBus traffic that races pmbus_do_probe()'s own device accesses with
no serialisation.
Move adm1266_config_nvmem() down past pmbus_do_probe() so the nvmem
device isn't reachable from userspace until the PMBus state the
nvmem accessors depend on is fully initialised.
Fixes: 15609d1893 ("hwmon: (pmbus/adm1266) read blackbox")
Cc: stable@vger.kernel.org
Signed-off-by: Abdurrahman Hussain <abdurrahman@nexthop.ai>
Link: https://lore.kernel.org/r/20260518-adm1266-gpio-fixes-v3-5-e425e4f88139@nexthop.ai
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
adm1266_probe() calls adm1266_config_gpio() -- which goes on to
devm_gpiochip_add_data() and exposes the gpio_chip callbacks to
gpiolib -- before pmbus_do_probe() has initialised the per-client
PMBus state (notably the pmbus_lock mutex the core hands out via
pmbus_get_data()).
That ordering is already a latent hazard: any GPIO access that lands
between adm1266_config_gpio() and the end of pmbus_do_probe() (for
example a sysfs read from a user space agent that opens the gpiochip
the instant gpiolib advertises it) races pmbus_do_probe()'s own
device accesses with no serialisation.
Move adm1266_config_gpio() down past pmbus_do_probe() so the chip
isn't reachable from userspace until the PMBus state it depends on
is fully initialised.
Fixes: d98dfad35c ("hwmon: (pmbus/adm1266) Add support for GPIOs")
Cc: stable@vger.kernel.org
Signed-off-by: Abdurrahman Hussain <abdurrahman@nexthop.ai>
Reviewed-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260518-adm1266-gpio-fixes-v3-4-e425e4f88139@nexthop.ai
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
adm1266_gpio_get() and adm1266_gpio_get_multiple() both compose the
pin-status word as
pins_status = read_buf[0] + (read_buf[1] << 8);
right after i2c_smbus_read_block_data(), guarding only against an
error return. A well-behaved device returns 2 bytes for
GPIO_STATUS/PDIO_STATUS, but the helper happily reports a 0- or
1-byte response too. If the device returns 0 bytes, both read_buf
slots are uninitialized stack memory; if it returns 1 byte, read_buf[1]
is.
The composed value then flows through set_bit() into the caller's
*bits in adm1266_gpio_get_multiple(), or into the return value of
adm1266_gpio_get(), and ends up in userspace via gpiolib (sysfs and
the char-dev ioctls). That leaks a few bits of kernel stack per
request on any device whose firmware glitch, bus error, or hostile
slave produces a short block-read response.
Add the missing length check to both call sites and surface a short
response as -EIO.
Fixes: d98dfad35c ("hwmon: (pmbus/adm1266) Add support for GPIOs")
Cc: stable@vger.kernel.org
Signed-off-by: Abdurrahman Hussain <abdurrahman@nexthop.ai>
Reviewed-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260518-adm1266-gpio-fixes-v3-3-e425e4f88139@nexthop.ai
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
adm1266_gpio_get_multiple() zeroes *bits before the GPIO_STATUS loop
and then a second time before the PDIO_STATUS loop:
*bits = 0;
for_each_set_bit(gpio_nr, mask, ADM1266_GPIO_NR) {
...
set_bit(gpio_nr, bits);
}
ret = i2c_smbus_read_block_data(data->client, ADM1266_PDIO_STATUS, ...);
...
*bits = 0;
for_each_set_bit_from(gpio_nr, mask, ADM1266_GPIO_NR + ADM1266_PDIO_NR) {
...
set_bit(gpio_nr, bits);
}
The second *bits = 0 throws away every GPIO bit the first loop just
populated, so callers asking for any combination of GPIO and PDIO
pins always see the GPIO portion of the returned bits as zero.
Drop the redundant second assignment so both halves of the result
survive.
Fixes: d98dfad35c ("hwmon: (pmbus/adm1266) Add support for GPIOs")
Cc: stable@vger.kernel.org
Signed-off-by: Abdurrahman Hussain <abdurrahman@nexthop.ai>
Reviewed-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
Reviewed-by: Linus Walleij <linusw@kernel.org>
Link: https://lore.kernel.org/r/20260518-adm1266-gpio-fixes-v3-2-e425e4f88139@nexthop.ai
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
adm1266_gpio_get_multiple() iterates the PDIO portion of the
caller-supplied mask using
for_each_set_bit_from(gpio_nr, mask,
ADM1266_GPIO_NR + ADM1266_PDIO_STATUS) {
...
}
where ADM1266_PDIO_STATUS is the PMBus command code (0xE9, i.e. 233),
not the number of PDIO pins. The intended upper bound is
ADM1266_GPIO_NR + ADM1266_PDIO_NR = 25.
gpiolib hands in a mask sized for gc.ngpio (= 25 bits on this chip),
so the iteration walks find_next_bit() up to 242, reading up to 217
extra bits (a handful of unsigned-long words: four on 64-bit, seven
on 32-bit) of whatever lives past the end of the mask in the
caller's stack. Any incidental set bit in that range then drives a
set_bit(gpio_nr, bits) call that writes past the end of the
caller-supplied bits array too -- both out-of-bounds.
Substitute ADM1266_PDIO_NR for the constant so the scan stops at the
last real PDIO bit.
Fixes: d98dfad35c ("hwmon: (pmbus/adm1266) Add support for GPIOs")
Cc: stable@vger.kernel.org
Signed-off-by: Abdurrahman Hussain <abdurrahman@nexthop.ai>
Reviewed-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
Reviewed-by: Linus Walleij <linusw@kernel.org>
Link: https://lore.kernel.org/r/20260518-adm1266-gpio-fixes-v3-1-e425e4f88139@nexthop.ai
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
adm1266_pmbus_block_xfer() copies the device-supplied block payload
into the caller-provided buffer using the device-supplied length:
memcpy(data_r, &msgs[1].buf[1], msgs[1].buf[0]);
The helper does not know how large data_r is and trusts the device to
return at most one record's worth of bytes. adm1266_nvmem_read_blackbox()
violates that contract: it advances read_buff inside data->dev_mem in
ADM1266_BLACKBOX_SIZE (64-byte) strides while the helper is willing to
write up to ADM1266_PMBUS_BLOCK_MAX (255) bytes. A device that returns
more than 64 bytes on the trailing record (read_buff offset 1984 in
the 2048-byte dev_mem allocation) overflows dev_mem by up to 191 bytes
before the post-call
if (ret != ADM1266_BLACKBOX_SIZE)
return -EIO;
can reject the response.
Contain the fix in the caller without changing the helper signature:
read each record into a 255-byte local bounce buffer that matches the
helper's maximum output, validate the returned length, and only then
copy exactly ADM1266_BLACKBOX_SIZE bytes into the dev_mem slot.
Fixes: 407dc802a9 ("hwmon: (pmbus/adm1266) Add Block process call")
Cc: stable@vger.kernel.org
Signed-off-by: Abdurrahman Hussain <abdurrahman@nexthop.ai>
Link: https://lore.kernel.org/r/20260515-adm1266-fixes-v1-5-1c1ea1349cfe@nexthop.ai
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Platforms that fit more than one ADM1266 on different I2C buses at
the same 7-bit slave address (a common shelf-management pattern,
e.g. one device per power domain) end up with duplicate GPIO line
labels because the existing format only includes the slave address.
Including the adapter number disambiguates them.
The adapter number is formatted as decimal to match the i2c-N
convention used elsewhere in Linux (sysfs paths, dev nodes); the
slave address keeps its conventional hexadecimal form.
The label is purely informational (visible via gpioinfo and the
gpiochip /sys/class/gpio name); no DT or ABI consumer parses it.
Fixes: d98dfad35c ("hwmon: (pmbus/adm1266) Add support for GPIOs")
Signed-off-by: Abdurrahman Hussain <abdurrahman@nexthop.ai>
Link: https://lore.kernel.org/r/20260512-adm1266-v3-5-a81a479b0bb0@nexthop.ai
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
In xe_oa_stream_open_ioctl(), when param.exec_q->width > 1 the
function returns -EOPNOTSUPP directly, skipping the existing
err_exec_q cleanup path. The exec_queue reference obtained by
xe_exec_queue_lookup() is leaked.
The exec queue holds a reference on the xe_file, which is only
dropped during queue teardown. The leaked lookup ref is not on
the file's exec_queue xarray, so file close cannot release it.
This keeps both the exec queue and the file private state pinned
indefinitely.
Jump to err_exec_q instead of returning directly so the reference
is released.
Fixes: f0ed39830e ("xe/oa: Fix query mode of operation for OAR/OAC")
Assisted-by: Claude:claude-opus-4.6
Reviewed-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Link: https://patch.msgid.link/20260514203210.593488-1-shuicheng.lin@intel.com
Signed-off-by: Shuicheng Lin <shuicheng.lin@intel.com>
(cherry picked from commit 339fa0be9e)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
adm1266_pmbus_block_xfer() sets up the read transaction with
.buf = data->read_buf,
.len = ADM1266_PMBUS_BLOCK_MAX + 2,
but read_buf in struct adm1266_data is declared as
u8 read_buf[ADM1266_PMBUS_BLOCK_MAX + 1];
For a max-length block response (length byte = 255 + up to 1 PEC
byte), the i2c controller is told to write 257 bytes into a 256-byte
buffer, putting one byte past the end of read_buf. The same response
also makes the subsequent PEC compare
if (crc != msgs[1].buf[msgs[1].buf[0] + 1])
read a byte beyond the array.
Bump the read_buf declaration to ADM1266_PMBUS_BLOCK_MAX + 2 so the
buffer can hold the length byte, up to 255 payload bytes, and the PEC
byte the i2c_msg length already accounts for.
Fixes: 407dc802a9 ("hwmon: (pmbus/adm1266) Add Block process call")
Cc: stable@vger.kernel.org
Signed-off-by: Abdurrahman Hussain <abdurrahman@nexthop.ai>
Link: https://lore.kernel.org/r/20260515-adm1266-fixes-v1-4-1c1ea1349cfe@nexthop.ai
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
adm1266_nvmem_read_blackbox() loops over a record_count that comes
straight from byte 3 of the BLACKBOX_INFO response. The destination
buffer is data->dev_mem, sized for the nvmem cell's declared 2048
bytes (ADM1266_BLACKBOX_MAX_RECORDS * ADM1266_BLACKBOX_SIZE = 32 * 64).
A device that reports a record_count greater than 32 -- whether due
to firmware bugs, bus corruption, or a non-responsive slave returning
0xff -- would walk read_buff past the end of the dev_mem allocation
on the trailing iterations.
Cap record_count at ADM1266_BLACKBOX_MAX_RECORDS (introduced here)
before entering the loop and return -EIO on any larger value, so a
malformed BLACKBOX_INFO response cannot drive the loop out of bounds.
Fixes: 15609d1893 ("hwmon: (pmbus/adm1266) read blackbox")
Cc: stable@vger.kernel.org
Signed-off-by: Abdurrahman Hussain <abdurrahman@nexthop.ai>
Link: https://lore.kernel.org/r/20260515-adm1266-fixes-v1-3-1c1ea1349cfe@nexthop.ai
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
