Add the 2.4 GHz IPA TX gain table for N-PHY rev 8 paired with radio
2057 rev 8 and wire it to the existing dispatcher.
b43_nphy_get_ipa_gain_table() in tables_nphy.c currently handles
case 8 only for radio_rev == 5; radio_rev == 8 falls through and
the function logs:
b43-phyX ERROR: No 2GHz IPA gain table available for this device
b43-phyX ERROR: PHY init: Channel switch to default failed
leaving b43_phy_init() to return an error and core_init to abort
before the MAC is enabled.
The high byte of every entry differs from the rev 5 sibling (0x40
vs 0x30): different PAD-gain code prefix for the rev 8 front-end.
The low 24 bits coincide with rev 5 across the whole table - the
gain step amplitudes are the same, only the PAD-gain selector
prefix changes.
Values extracted from an MMIO dump of the proprietary Broadcom wl
driver running on BCM6362 silicon (wl driver 6.30.102.7).
Assisted-by: Claude:claude-4.7-opus
Signed-off-by: Alessio Ferri <alessio.ferri@mythread.it>
Acked-by: Michael Büsch <m@bues.ch>
Reviewed-by: Joshua Peisach <jpeisach@ubuntu.com>
Link: https://patch.msgid.link/20260528-b43_complete_n_phy_rev_8_radio_2057_rev_8_support-v4-5-464566194d47@gmail.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Add support for radio 2057 revision 8, paired with N-PHY rev 8 on
the Broadcom BCM6362 single-die integrated 2.4 GHz wireless block.
Three correlated changes are needed for the same chip:
- main.c: the radio_rev allow-list under B43_PHYTYPE_N currently
accepts radio 2057 revisions 9 and 14 only; extend to include
rev 8.
- radio_2057.c: the existing r2057_rev8_init[] is a 54-entry stub
declared inside a TODO comment block and never referenced
from r2057_upload_inittabs().
Replace it with the full 412-entry register set actually
programmed by the proprietary Broadcom wl driver on this radio.
I couldn't find the origin of the original 54-entry stub - 8
of its entries do not appear at all in the rev 8 register set
and 7 more carry different values.
Loading it instead of using the real table leaves the radio
hanging producing a "Microcode not responding" timeout.
- radio_2057.c: r2057_upload_inittabs() case 8 handles radio_rev
5 and 7 only; add the radio_rev == 8 branch pointing at the
new table.
The init table is extracted from an MMIO dump of the radio
register set programmed during proprietary driver initialisation
on BCM6362 silicon (Broadcom wl driver 6.30.102.7).
Assisted-by: Claude:claude-4.7-opus
Signed-off-by: Alessio Ferri <alessio.ferri@mythread.it>
Acked-by: Michael Büsch <m@bues.ch>
Reviewed-by: Joshua Peisach <jpeisach@ubuntu.com>
Link: https://patch.msgid.link/20260528-b43_complete_n_phy_rev_8_radio_2057_rev_8_support-v4-4-464566194d47@gmail.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Rev 22 backports the older 802.11 core but pairs it with a radio
in the 2057 family, which requires the 24-bit indirect path. With
the current dispatch, corerev 22 falls into the legacy 4-wire branch,
reads garbage for radio_id, and bails out with -EOPNOTSUPP at the
"FOUND UNSUPPORTED RADIO" branch below.
brcmsmac handles the same silicon family with the equivalent
dispatch in drivers/net/wireless/broadcom/brcm80211/brcmsmac/phy/
phy_cmn.c read_radio_reg() and write_radio_reg():
if ((D11REV_GE(pi->sh->corerev, 24)) ||
(D11REV_IS(pi->sh->corerev, 22)
&& (pi->pubpi.phy_type != PHY_TYPE_SSN))) {
/* radioregaddr / radioregdata (indirect) */
} else {
/* phy4waddr / phy4wdatalo (legacy) */
}
b43 does not support SSN/SSLPN PHYs - they are rejected earlier in
b43_phy_versioning() at the "unsupported PHY type" switch - so just
adding the check corerev == 22 will do.
Assisted-by: Claude:claude-4.7-opus
Signed-off-by: Alessio Ferri <alessio.ferri@mythread.it>
Acked-by: Michael Büsch <m@bues.ch>
Reviewed-by: Joshua Peisach <jpeisach@ubuntu.com>
Link: https://patch.msgid.link/20260528-b43_complete_n_phy_rev_8_radio_2057_rev_8_support-v4-3-464566194d47@gmail.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Add d11 core revision 0x16 (= 22) to the b43 bcma device id table.
The b43 bcma id table covers d11 revisions 0x11, 0x15, 0x17, 0x18,
0x1C, 0x1D, 0x1E, 0x28 and 0x2A. Revision 0x16 belongs to the same
N-PHY family as revisions 0x17 and 0x18 (radio 2057) and needs no
new PHY or radio code beyond the radio_rev 8 dispatcher entries
added later in this series - only the device id entry is missing.
Without it bcma scan enumerates the 802.11 core but no driver binds.
The revision is used by the Broadcom BCM6362 single-die integrated
2.4 GHz wireless block found in xDSL SoCs.
Assisted-by: Claude:claude-4.7-opus
Signed-off-by: Alessio Ferri <alessio.ferri@mythread.it>
Acked-by: Michael Büsch <m@bues.ch>
Reviewed-by: Joshua Peisach <jpeisach@ubuntu.com>
Link: https://patch.msgid.link/20260528-b43_complete_n_phy_rev_8_radio_2057_rev_8_support-v4-2-464566194d47@gmail.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
add the specific firmware mappings for rev22, and drop comments wondering about rev22 initvals
Assisted-by: Claude:claude-4.7-opus
Signed-off-by: Alessio Ferri <alessio.ferri@mythread.it>
Acked-by: Michael Büsch <m@bues.ch>
Reviewed-by: Joshua Peisach <jpeisach@ubuntu.com>
Link: https://patch.msgid.link/20260528-b43_complete_n_phy_rev_8_radio_2057_rev_8_support-v4-1-464566194d47@gmail.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
The length of the string is calculated in order to allocate the correct
sized memory block, use the same length to copy the string.
Signed-off-by: David Laight <david.laight.linux@gmail.com>
Link: https://patch.msgid.link/20260606202633.5018-8-david.laight.linux@gmail.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Use a flexible array member and kzalloc_flex to combine allocations.
Simplifies code slightly.
Add __counted_by for extra runtime analysis.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Acked-by: Arend van Spriel <arend.vanspriel@broadcom.com>
Link: https://patch.msgid.link/20260608051102.6698-1-rosenp@gmail.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Change to a single allocation and remove some boilerplate.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Acked-by: Arend van Spriel <arend.vanspriel@broadcom.com>
Link: https://patch.msgid.link/20260608052854.11718-1-rosenp@gmail.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
An assortment of cleanups and minor bug fixes across wcn36xx, ath9k,
ath10k, ath11k, and ath12k.
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQQ/mtSHzPUi16IfDEksFbugiYzLewUCaigklQAKCRAsFbugiYzL
e5LdAP904BAnjc1B2SjMEXpQi+xlU5KGUfn8b+hTEe4jZR251gD+KdksJ8LOGjrd
5SQGDMUW/a8LcL+KTQO7jLRmAZ/YCw8=
=n2Cq
-----END PGP SIGNATURE-----
Merge tag 'ath-next-20260609' of git://git.kernel.org/pub/scm/linux/kernel/git/ath/ath
Jeff Johnson says:
==================
ath.git patches for v7.2 (PR #4)
An assortment of cleanups and minor bug fixes across wcn36xx, ath9k,
ath10k, ath11k, and ath12k.
==================
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
When firmware reports NSS ratio support, SUPPORTS_VHT_EXT_NSS_BW is enabled in
ath12k. However, IEEE80211_VHT_EXT_NSS_BW_CAPABLE must also be set to make the
advertisement valid.
According to IEEE Std 802.11-2024, Subclause 9.4.2.156.3 (Supported VHT-MCS and
NSS Set subfields), the VHT Extended NSS BW Capable bit indicates whether a STA
is capable of interpreting the Extended NSS BW Support subfield of the VHT
capabilities information field. Advertising extended NSS BW support without
setting this capability bit is therefore invalid.
Without this change, mac80211 detects the inconsistency and logs:
ieee80211 phy0: copying sband (band 1) due to VHT EXT NSS BW flag
This indicates that mac80211 implicitly aligns IEEE80211_VHT_EXT_NSS_BW_CAPABLE
during ieee80211_register_hw(). Explicitly setting the bit in ath12k avoids this
fixup and ensures capabilities are advertised correctly by the driver.
This change follows the same approach as the existing ath11k fix.
https://lore.kernel.org/all/20211013073704.15888-1-wgong@codeaurora.org/
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.5-01651-QCAHKSWPL_SILICONZ-1
Fixes: 18ab9d038f ("wifi: ath12k: add support for 160 MHz bandwidth")
Signed-off-by: Wen Gong <quic_wgong@quicinc.com>
Signed-off-by: Maharaja Kennadyrajan <maharaja.kennadyrajan@oss.qualcomm.com>
Reviewed-by: Rameshkumar Sundaram <rameshkumar.sundaram@oss.qualcomm.com>
Link: https://patch.msgid.link/20260604095831.2674298-1-maharaja.kennadyrajan@oss.qualcomm.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
On WCN7850, after the following sequence:
1. load ath12k and connect to a non-MLO AP
2. disconnect and connect to an MLO AP
3. disconnect and reconnect to the non-MLO AP
the third connection always fails with a 4-Way handshake timeout. The
supplicant transmits message 2 of 4 four times in response to AP
retries of message 1, but the AP never sees any of them.
ath12k_dp_vdev_tx_attach() composes dp_link_vif->tcl_metadata using |=,
but dp_link_vif is embedded in struct ath12k_dp_vif and its slots are
reused across vif/peer teardown and setup. Since tcl_metadata is never
cleared on detach, vdev_id bits from a previous attach remain set when
the same link slot is reused with a different vdev_id. In this specific
issue, the same link slot is used for vdev_id 0, then vdev_id 1, then
vdev_id 0 again, the OR yields tcl_metadata == 0x9, which encodes
vdev_id 1 in the HTT_TCL_META_DATA_VDEV_ID field even though
ti.vdev_id is 0. Firmware then routes the EAPOL frame to the wrong
vdev and the AP never receives message 2.
Use plain assignment instead of |= so the field is fully recomputed
from the current arvif on every attach.
Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.1.c7-00108-QCAHMTSWPL_V1.0_V2.0_SILICONZ_UPSTREAM-3
Fixes: af66c7640c ("wifi: ath12k: Refactor ath12k_vif structure")
Signed-off-by: Baochen Qiang <baochen.qiang@oss.qualcomm.com>
Reviewed-by: Rameshkumar Sundaram <rameshkumar.sundaram@oss.qualcomm.com>
Link: https://patch.msgid.link/20260609-ath12k-fix-eapol-tcl-metadata-v1-1-d47e6f90d4ee@oss.qualcomm.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
mt76_register_debugfs_fops() returns the dentry from
debugfs_create_dir(), which yields an error pointer on failure
(notably ERR_PTR(-ENODEV) when CONFIG_DEBUG_FS=n), never NULL. Per
commit ff9fb72bc0 ("debugfs: return error values, not NULL"),
callers do not need to check the return value.
Drop the dead !dir checks in mt7615/mt7915/mt7921/mt7925/mt7996
_init_debugfs(). Converting them to IS_ERR() instead would have
exposed a probe abort on CONFIG_DEBUG_FS=n, since each
*_init_debugfs() caller propagates the helper's return value.
This patch supersedes an earlier proposal that converted the checks
to IS_ERR().
Link: https://lore.kernel.org/all/20260514193243.2518979-1-ingyujang25@korea.ac.kr
Signed-off-by: Ingyu Jang <ingyujang25@korea.ac.kr>
Link: https://patch.msgid.link/20260519085214.164846-1-ingyujang25@korea.ac.kr
Signed-off-by: Felix Fietkau <nbd@nbd.name>
mt7921_change_chanctx() configures the channel for monitor vifs but
does not re-assert sniffer mode. mt7925_change_chanctx() does. Match
mt7925 by adding the missing mt7921_mcu_set_sniffer(true) call,
completing the architectural pattern from commit 914189af23 ("wifi:
mt76: mt7921: fix channel switch fail in monitor mode").
The user-visible regression this asymmetry produced on v6.17 and v6.18
was addressed by commit cdb2941a51 ("Revert "wifi: mt76: mt792x:
improve monitor interface handling"") in v6.19 and backported to the
6.17.y and 6.18.y stable trees. This patch is defense in depth in
case the NO_VIRTUAL_MONITOR change is reintroduced in a future series.
Tested-by: Nick Morrow <morrownr@gmail.com>
Tested-on: RasPi4B, RasPiOS 64 bit, Alfa AWUS036AXML mt7921u
Tested-on: RasPi4B, RasPiOS 64 bit, Netgear A9000 mt7925u
Signed-off-by: Devin Wittmayer <lucid_duck@justthetip.ca>
Link: https://patch.msgid.link/20260515183921.23484-1-lucid_duck@justthetip.ca
Signed-off-by: Felix Fietkau <nbd@nbd.name>
When FIELD_GET returns 0 for the retry count, subtracting 1 causes
an unsigned integer underflow, resulting in tx_retries becoming a
very large value (0xFFFFFFFF for u32).
Fix by checking if count is non-zero before subtracting 1.
Fixes: 2461599f83 ("wifi: mt76: mt7996: get tx_retries and tx_failed from txfree")
Signed-off-by: Ryder Lee <ryder.lee@mediatek.com>
Link: https://patch.msgid.link/20260605113306.3485554-4-ryder.lee@mediatek.com
Signed-off-by: Felix Fietkau <nbd@nbd.name>
When FIELD_GET returns 0 for the retry count, subtracting 1 causes
an unsigned integer underflow, resulting in tx_retries becoming a
very large value (0xFFFFFFFF for u32).
Fix by checking if count is non-zero before subtracting 1.
Fixes: c948b5da6b ("wifi: mt76: mt7925: add Mediatek Wi-Fi7 driver for mt7925 chips")
Signed-off-by: Ryder Lee <ryder.lee@mediatek.com>
Link: https://patch.msgid.link/20260605113306.3485554-3-ryder.lee@mediatek.com
Signed-off-by: Felix Fietkau <nbd@nbd.name>
When FIELD_GET returns 0 for the retry count, subtracting 1 causes
an unsigned integer underflow, resulting in tx_retries becoming a
very large value (0xFFFFFFFF for u32).
Fix by checking if count is non-zero before subtracting 1.
Fixes: 9aecfa754c ("wifi: mt76: mt7921e: report tx retries/failed counts in tx free event")
Signed-off-by: Ryder Lee <ryder.lee@mediatek.com>
Link: https://patch.msgid.link/20260605113306.3485554-2-ryder.lee@mediatek.com
Signed-off-by: Felix Fietkau <nbd@nbd.name>
When FIELD_GET returns 0 for the retry count, subtracting 1 causes
an unsigned integer underflow, resulting in tx_retries becoming a
very large value (0xFFFFFFFF for u32).
Fix by checking if count is non-zero before subtracting 1.
Fixes: 943e4fb96e ("wifi: mt76: mt7915: report tx retries/failed counts for non-WED path")
Signed-off-by: Ryder Lee <ryder.lee@mediatek.com>
Link: https://patch.msgid.link/20260605113306.3485554-1-ryder.lee@mediatek.com
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Add regd_user flag to block automatic regulatory domain updates
if set by user.
Co-developed-by: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: JB Tsai <jb.tsai@mediatek.com>
Link: https://patch.msgid.link/20260303053637.465465-5-jb.tsai@mediatek.com
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Implement 802.11d-based automatic regulatory domain switching to
dynamically determine the regulatory domain at runtime.
The scan-done event structure by reusing reserved padding and appending
new fields; the layout and values remains backward-compatible with
existing users.
Co-developed-by: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: JB Tsai <jb.tsai@mediatek.com>
Link: https://patch.msgid.link/20260303053637.465465-4-jb.tsai@mediatek.com
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Rename mt7921_regd_update() to mt7921_mcu_regd_update() to centralize
regd updates with error handling.
Co-developed-by: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: JB Tsai <jb.tsai@mediatek.com>
Link: https://patch.msgid.link/20260303053637.465465-3-jb.tsai@mediatek.com
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Move the disable_clc module parameter to regd.c and introduce
mt7921_regd_clc_supported() to centralize CLC support checks.
Co-developed-by: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: JB Tsai <jb.tsai@mediatek.com>
Link: https://patch.msgid.link/20260303053637.465465-2-jb.tsai@mediatek.com
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Move regd logic to regd.c and regd.h files
Co-developed-by: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: JB Tsai <jb.tsai@mediatek.com>
Link: https://patch.msgid.link/20260303053637.465465-1-jb.tsai@mediatek.com
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Add the ID 056e:400a to the table to support an additional MT7612U
adapter: ELECOM WDC-867SU3S.
Compile tested only.
Cc: stable@vger.kernel.org # 5.10.x
Signed-off-by: Zenm Chen <zenmchen@gmail.com>
Acked-by: Lorenzo Bianconi <lorenzo@kernel.org>
Link: https://patch.msgid.link/20260407154430.9184-1-zenmchen@gmail.com
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Check the USB control path before running the normal WFSYS reset flow.
If USB access is no longer reliable, stop the WFSYS-only reset path,
mark the device as bus_hung, and queue a USB device reset instead.
Reuse the existing bus_hung state to represent transport-level failure,
keeping the semantics consistent with the SDIO path.
Also initialize bus_hung explicitly during probe for consistency.
Reported-by: Bryam Vargas <bryamestebanvargas@gmail.com>
Closes: https://lore.kernel.org/r/CANAPQziOh3sB7B8G+U3AZsFfeFN1uAg4munhwA_feZi56D7W+Q@mail.gmail.com
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Link: https://patch.msgid.link/20260401190632.147042-2-sean.wang@kernel.org
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Add per-device USB reset work and a control-path access check helper
for mt7921u and mt7925u.
This prepares common infrastructure for transport-level recovery while
keeping the reset state per-device for correct lifetime handling.
No functional change intended.
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Link: https://patch.msgid.link/20260401190632.147042-1-sean.wang@kernel.org
Signed-off-by: Felix Fietkau <nbd@nbd.name>
mt792x currently reports txpower from the generic PHY cached state,
which may not match the requested vif/link context.
Resolve the requested link channel and derive txpower from that channel
instead, with fallback to the current PHY chandef if no valid chanctx is
available.
Reported-by: Devin Wittmayer <lucid_duck@justthetip.ca>
Closes: https://lore.kernel.org/linux-wireless/20260130215839.53270-1-lucid_duck@justthetip.ca/
Tested-by: Devin Wittmayer <lucid_duck@justthetip.ca>
Tested-by: Satadru Pramanik <satadru@gmail.com>
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Link: https://patch.msgid.link/20260401182322.64355-3-sean.wang@kernel.org
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Factor out the per-channel rate power limit calculation into a shared
helper.
This avoids duplicating the same regulatory, SAR and rate-limit logic in
multiple paths.
Reported-by: Devin Wittmayer <lucid_duck@justthetip.ca>
Closes: https://lore.kernel.org/linux-wireless/20260130215839.53270-1-lucid_duck@justthetip.ca/
Tested-by: Devin Wittmayer <lucid_duck@justthetip.ca>
Tested-by: Satadru Pramanik <satadru@gmail.com>
Co-developed-by: Devin Wittmayer <lucid_duck@justthetip.ca>
Signed-off-by: Devin Wittmayer <lucid_duck@justthetip.ca>
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Link: https://patch.msgid.link/20260401182322.64355-2-sean.wang@kernel.org
Signed-off-by: Felix Fietkau <nbd@nbd.name>
The cached txpower value is derived from the bounded channel power after
applying the chainmask path delta.
Use a helper for that conversion so callers do not open-code it.
--
v2:
- Rebased onto the latest mt76 tree
- Added Reported-by, Tested-by, Co-developed-by and Signed-off-by tags
Reported-by: Devin Wittmayer <lucid_duck@justthetip.ca>
Closes: https://lore.kernel.org/linux-wireless/20260130215839.53270-1-lucid_duck@justthetip.ca/
Tested-by: Devin Wittmayer <lucid_duck@justthetip.ca>
Tested-by: Satadru Pramanik <satadru@gmail.com>
Co-developed-by: Devin Wittmayer <lucid_duck@justthetip.ca>
Signed-off-by: Devin Wittmayer <lucid_duck@justthetip.ca>
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Reported-by: Lucid Duck <lucid_duck@justthetip.ca>
Tested-by: Lucid Duck <lucid_duck@justthetip.ca>
Link: https://patch.msgid.link/20260401182322.64355-1-sean.wang@kernel.org
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Calls to mt7996_set_bitrate_mask() would propagate work for all stations
on the ieee80211_hw regardless of the vif specified in the call. To
prevent unnecessary work in FW, limit setting the sta_rate to only the
specified vif in mt7996_sta_rate_ctrl_update().
Fixes: afff432554 ("wifi: mt76: mt7996: Use proper link_id in link_sta_rc_update callback")
Signed-off-by: Dylan Eskew <dylan.eskew@candelatech.com>
Acked-by: Lorenzo Bianconi <lorenzo@kernel.org>
Link: https://patch.msgid.link/20260408145057.2356878-2-dylan.eskew@candelatech.com
Signed-off-by: Felix Fietkau <nbd@nbd.name>
In mt7996_set_coverage_class(), each phy is iterated over in calling
mt7996_mac_set_coverage_class(). Thus, the phy2 and phy3 configuration
logic in mt7996_mac_set_coverage_class() can be dropped.
Signed-off-by: Dylan Eskew <dylan.eskew@candelatech.com>
Link: https://patch.msgid.link/20260415155354.1135548-2-dylan.eskew@candelatech.com
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Add the 0e8d:7902 USB ID and select the MT7902 WM firmware. Use the
same USB queue mapping as mt7921/mt7925 so MT7902U can bind and probe
through mt7921u driver.
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Link: https://patch.msgid.link/20260425160930.739237-1-sean.wang@kernel.org
Signed-off-by: Felix Fietkau <nbd@nbd.name>
commit b478e162f2 ("PCI/ASPM: Consolidate link state defines") changed
PCIE_LINK_STATE_L0S (1) to (BIT(0) | BIT(1)). PCI_EXP_LNKCTL_ASPM_L0S (1)
and PCI_EXP_LNKCTL_ASPM_L1 (2) are no longer matched with
PCIE_LINK_STATE_L0S (3) and PCIE_LINK_STATE_L1 (4).
On the platform enabling ASPM L0s and L1, mt76_pci_disable_aspm is not able
to disable L1. Fix this by transforming aspm_conf to pcie link state.
Signed-off-by: Jiajia Liu <liujiajia@kylinos.cn>
Link: https://patch.msgid.link/20260602054349.42429-1-liujia6264@gmail.com
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Since mt7925_mac_sta_add publishes wcid, add publish check in mt76_sta_add
to avoid reinitializing the wcid->poll_list.
Found dev->sta_poll_list corruption when using mt7925 and 7.1-rc4.
According to the corruption information, prev->next was changed to itself.
wlan0: disconnect from AP 90:fb:5d:94:8b:e3 for new auth to 90:fb:5d:94:8b:e2
wlan0: authenticate with 90:fb:5d:94:8b:e2 (local address=84:9e:56:9c:7e:6b)
wlan0: send auth to 90:fb:5d:94:8b:e2 (try 1/3)
slab kmalloc-8k start ffff8c80958a6000 pointer offset 4160 size 8192
list_add corruption. prev->next should be next (ffff8c808a7488f8), but was ffff8c80958a7040. (prev=ffff8c80958a7040).
mt76_wcid_add_poll+0x95/0xd0 [mt76]
mt7925_mac_add_txs.part.0+0xa5/0xe0 [mt7925_common]
mt7925_rx_check+0xa7/0xc0 [mt7925_common]
mt76_dma_rx_poll+0x50d/0x790 [mt76]
mt792x_poll_rx+0x52/0xe0 [mt792x_lib]
Signed-off-by: Jiajia Liu <liujiajia@kylinos.cn>
Link: https://patch.msgid.link/20260528033814.46418-1-liujiajia@kylinos.cn
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Drop the unnecessary pdev->bus NULL check in mt7996_pci_probe() since
the pointer is already dereferenced earlier in mt76_pci_disable_aspm(),
making the check dead code. Silences the related Smatch warning.
Fixes: 377aa17d2a ("wifi: mt76: mt7996: Add NPU offload support to MT7996 driver")
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Link: https://patch.msgid.link/20260522-mt7996-pdev-bus-fix-v1-1-c91716484365@kernel.org
Signed-off-by: Felix Fietkau <nbd@nbd.name>
mt76_tx_status_skb_add() zeroes the mt76_tx_cb struct stored at
info->status.status_driver_data via memset(). Since info->control and
info->status are members of the same union in ieee80211_tx_info,
this overwrites info->control.flags.
In mt7996_tx_prepare_skb(), mt76_tx_status_skb_add() is called before
mt7996_mac_write_txwi(), which re-reads info->control.flags to extract
IEEE80211_TX_CTRL_MLO_LINK. Because the field has been zeroed, the
link_id always resolves to 0 for frames using global_wcid, leading to
incorrect TXWI configuration.
Fix this by passing link_id as an explicit parameter to
mt7996_mac_write_txwi(). In mt7996_tx_prepare_skb(), the link_id is
already extracted from info->control.flags before the destructive
mt76_tx_status_skb_add() call. For the beacon and inband discovery
callers in mcu.c, use link_conf->link_id directly.
Fixes: f0b0b239b8 ("wifi: mt76: mt7996: rework mt7996_mac_write_txwi() for MLO support")
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Link: https://patch.msgid.link/20260531-mt76_tx_status_skb_add-overwrite-fix-v2-1-b73c4b4a9798@kernel.org
Signed-off-by: Felix Fietkau <nbd@nbd.name>
For injected frames (e.g. via radiotap), mac80211 can pass
info->control.vif = NULL, as explicitly noted in struct ieee80211_tx_info.
Check vif pointer before executing ieee80211_vif_is_mld() in
mt7996_mac_write_txwi_80211 routine in order to avoid a possible NULL
pointer dereference.
Fixes: f0b0b239b8 ("wifi: mt76: mt7996: rework mt7996_mac_write_txwi() for MLO support")
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Link: https://patch.msgid.link/20260531-mt7996_mac_write_txwi_80211-null-ptr-deref-v1-1-6dd38e1d3422@kernel.org
Signed-off-by: Felix Fietkau <nbd@nbd.name>
If link_conf or link_sta lookup fails in mt7996_tx_prepare_skb routine,
mt7996 driver leaks an already allocated tx token. Fix the issue
releasing the token in case of error.
Fixes: 7ef0c7ad73 ("wifi: mt76: mt7996: Implement MLD address translation for EAPOL")
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Link: https://patch.msgid.link/20260531-mt7996_tx_prepare_skb-token-leack-v1-1-2b9c9f59ceb1@kernel.org
Signed-off-by: Felix Fietkau <nbd@nbd.name>
In mt7915_mcu_get_txpower_sku(), the response skb from
mt76_mcu_send_and_get_msg() is used in memcpy without validating
its length:
For TX_POWER_INFO_RATE:
memcpy(res, skb->data + 4, sizeof(res));
where sizeof(res) is MT7915_SKU_RATE_NUM * 2 = 322 bytes.
For TX_POWER_INFO_PATH:
memcpy(txpower, skb->data + 4, len);
In both cases, if the firmware returns a response shorter than
the expected size, the memcpy reads beyond the skb data buffer.
The data surfaces to userspace via debugfs (txpower_sku and
txpower_path).
Add length checks for both code paths before the memcpy.
Signed-off-by: Aviel Zohar <avielzohar123@gmail.com>
Link: https://patch.msgid.link/20260413033136.5417-3-avielzohar123@gmail.com
Signed-off-by: Felix Fietkau <nbd@nbd.name>
In mt7925_tm_query(), the response skb from mt76_mcu_send_and_get_msg()
is used in a memcpy without validating its length:
memcpy(evt_resp, skb->data + 8, MT7925_EVT_RSP_LEN);
where MT7925_EVT_RSP_LEN is 512. If the firmware returns a response
shorter than 520 bytes (8 + 512), this reads beyond the skb data
buffer. The over-read data is then returned to userspace via nla_put()
in mt7925_testmode_dump().
Add a length check before the memcpy to ensure the skb contains
sufficient data.
Fixes: c948b5da6b ("wifi: mt76: mt7925: add Mediatek Wi-Fi7 driver for mt7925 chips")
Signed-off-by: Aviel Zohar <avielzohar123@gmail.com>
Link: https://patch.msgid.link/20260413033136.5417-2-avielzohar123@gmail.com
Signed-off-by: Felix Fietkau <nbd@nbd.name>
mt792x_tx() rewrites addr1/addr2/addr3 by treating skb->data as
an 802.11 header for MLD traffic.
That is only valid for native 802.11 frames. Direct 802.3 TX can also
reach this path with IEEE80211_TX_CTL_HW_80211_ENCAP set, where
skb->data is not an 802.11 header.
Skip the MLD header rewrite for HW-encap packets to avoid corrupting
802.3 frame contents.
Fixes: ebb1406813 ("wifi: mt76: mt7925: add link handling to txwi")
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Link: https://patch.msgid.link/20260425144648.734030-1-sean.wang@kernel.org
Signed-off-by: Felix Fietkau <nbd@nbd.name>
With MLO, traffic for one TID can be sent on any active link. Programming
BA state only on the default link leaves the other active links out of
sync.
Program BA state on all active links instead.
Fixes: 766ea2cf5a ("Revert "wifi: mt76: mt7925: Update mt7925_mcu_uni_[tx,rx]_ba for MLO"")
Tested-by: Yao Ting Hsieh <yao-ting.hsieh@mediatek.com>
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Link: https://patch.msgid.link/20260425154721.738101-3-sean.wang@kernel.org
Signed-off-by: Felix Fietkau <nbd@nbd.name>
mt7925_mcu_sta_ba() currently hides the BA target behind an implicit WCID
lookup.
Pass the WCID explicitly so the caller controls which BA context is being
programmed.
No functional change intended.
Tested-by: Yao Ting Hsieh <yao-ting.hsieh@mediatek.com>
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Link: https://patch.msgid.link/20260425154721.738101-2-sean.wang@kernel.org
Signed-off-by: Felix Fietkau <nbd@nbd.name>
For MLO, the same TID can run over different links. Keeping TX BA state in
a link WCID makes the state depend on which link starts aggregation first.
Store it in the primary WCID instead, so the BA state stays stable across
links.
Fixes: 44eb173bdd ("wifi: mt76: mt7925: add link handling in mt7925_txwi_free")
Tested-by: Yao Ting Hsieh <yao-ting.hsieh@mediatek.com>
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Link: https://patch.msgid.link/20260425154721.738101-1-sean.wang@kernel.org
Signed-off-by: Felix Fietkau <nbd@nbd.name>
