In the ttm_bo_unreserve_bulk() test function, resv is allocated using
kunit_kzalloc(), but the subsequent assertion mistakenly verifies the
ttm_dev pointer instead of the resv pointer.
Fix the assertion to properly verify the resv pointer.
Signed-off-by: Qasim Ijaz <qasdev00@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250313161424.10688-1-qasdev00@gmail.com
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Christian König <christian.koenig@amd.com>
crtc->mode is legacy junk and shouldn't really be used with
atomic drivers.
Most (all?) atomic drivers do end up still calling
drm_atomic_helper_update_legacy_modeset_state() at some
point, so crtc->mode does still get populated, and this
does work for now. But now that the modes[] lifetime issues
have been sorted out we can just switch over to the
proper crtc->state->mode.
v2: Rebase
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250228211454.8138-6-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
drm_client_firmware_config() is currently picking up the current
mode of the crtc via the legacy crtc->mode, which is not supposed
to be used by atomic drivers at all. We can't simply switch over
to the proper crtc->state->mode because we drop the crtc->mutex
(which protects crtc->state) before the mode gets used.
The most straightforward solution to extend the lifetime of
modes[] seem to be to make full copies of the modes.
And with this we can undo also commit 3eadd887db
("drm/client:Fully protect modes[] with dev->mode_config.mutex")
as the lifetime of modes[] no longer has anything to do with
that lock.
v2: Don't try to copy NULL modes
v3: Keep storing pointers and use drm_mode_{duplicate,destroy}()
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250228211454.8138-5-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Use the array notation rather that the pointer notation for
function arguments. This makes it clear to the reader that
we are in fact dealing with an array rather than a single
pointer. Functionally the two are equivalent.
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250228211454.8138-3-ville.syrjala@linux.intel.com
The modes used by the client code live on the connectors' mode
lists, which are not owned by the client code, and thus it has
no business modifying the modes. Mark the modes const to make
that fact abundantly clear.
v2: Fix up the kunit test
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250303093847.7698-1-ville.syrjala@linux.intel.com
Merge request pipelines were only created when changes
were made to drivers/gpu/drm/ci/, causing MRs that
didn't touch this path to break. Fix MR pipeline rules
to trigger jobs for all changes.
Run jobs automatically for marge-bot and scheduled
pipelines, but in all other cases run manually. Also
remove CI_PROJECT_NAMESPACE checks specific to mesa.
Fixes: df54f04f20 ("drm/ci: update gitlab rules")
Signed-off-by: Vignesh Raman <vignesh.raman@collabora.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Signed-off-by: Helen Koike <helen.fornazier@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250228132620.556079-1-vignesh.raman@collabora.com
The new audio code fails to build when sounds support is in a loadable
module but the GPU driver is built-in:
x86_64-linux-ld: zynqmp_dp_audio.c:(.text+0x6a8): undefined reference to `devm_snd_soc_register_card'
x86_64-linux-ld: drivers/gpu/drm/xlnx/zynqmp_dp_audio.o:(.rodata+0x1bc): undefined reference to `snd_soc_info_volsw'
x86_64-linux-ld: drivers/gpu/drm/xlnx/zynqmp_dp_audio.o:(.rodata+0x1f0): undefined reference to `snd_soc_get_volsw'
x86_64-linux-ld: drivers/gpu/drm/xlnx/zynqmp_dp_audio.o:(.rodata+0x1f4): undefined reference to `snd_soc_put_volsw'
Change the Kconfig dependency to disallow the sound support in this
configuration.
Fixes: 3ec5c15793 ("drm: xlnx: zynqmp_dpsub: Add DP audio support")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250227132036.1136600-1-arnd@kernel.org
This reverts commit 44d2f310f0.
The function drm_sched_job_arm() is indeed the point of no return. The
background is that it is nearly impossible for the driver to correctly
retract the fence and signal it in the order enforced by the dma_fence
framework.
The code in drm_sched_job_cleanup() is for the purpose to cleanup after
the job was armed through drm_sched_job_arm() *and* processed by the
scheduler.
We can certainly improve the documentation, but removing the warning is
clearly not a good idea.
Signed-off-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Philipp Stanner <phasta@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20250312134400.2176393-1-christian.koenig@amd.com
The global bridges_list holding all the bridges between drm_bridge_add()
and drm_bridge_remove() cannot be inspected via debugfs. Add a file showing
it.
To avoid code duplication, move the code printing a bridge info to a common
function.
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250226-drm-debugfs-show-all-bridges-v8-2-bb511cc49d83@bootlin.com
Signed-off-by: Louis Chauvet <louis.chauvet@bootlin.com>
In preparation to expose more info about bridges in debugfs, which will
require more insight into drm_bridge data structures, move the bridges_show
code to drm_bridge.c.
Suggested-by: Jani Nikula <jani.nikula@linux.intel.com>
Suggested-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250226-drm-debugfs-show-all-bridges-v8-1-bb511cc49d83@bootlin.com
Signed-off-by: Louis Chauvet <louis.chauvet@bootlin.com>
Add support for the POWERTIP PH128800T004-ZZA01 10.1" (1280x800)
LCD-TFT panel. Its panel description is very much like the POWERTIP
PH128800T006-ZHC01 configured below this one, only its timings are
different.
Signed-off-by: Antonin Godard <antonin.godard@bootlin.com>
Reviewed-by: Dmitry Baryshkov <lumag@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20250311-add-powertip-ph128800t004-v1-2-7f95e6984cea@bootlin.com
Signed-off-by: Louis Chauvet <louis.chauvet@bootlin.com>
Use aperture helpers to remove all generic graphics drivers before
loading mxsfb. Makes mxsfb compatible with simpledrm.
Co-developed-by: Michael Trimarchi <michael@amarulasolutions.com>
Signed-off-by: Michael Trimarchi <michael@amarulasolutions.com>
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20250305140929.174398-1-dario.binacchi@amarulasolutions.com
Set the dma_dev field provided by the DRM device. Required for PRIME
dma-buf import. Remove the driver's implementation.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Tested-by: Aditya Garg <gargaditya08@live.com>
Reviewed-by: Aditya Garg <gargaditya08@live.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250307080836.42848-3-tzimmermann@suse.de
Importing dma-bufs via PRIME requires a DMA-capable device. Devices on
peripheral busses, such as USB, often cannot perform DMA by themselves.
Without DMA-capable device PRIME import fails. DRM drivers for USB
devices already use a separate DMA device for dma-buf imports. Make the
mechanism generally available.
Besides the case of USB, there are embedded DRM devices without DMA
capability. DMA is performed by a separate controller. DRM drivers should
set this accordingly.
Add the field dma_dev to struct drm_device to refer to the device's DMA
device. For USB this should be the USB controller. Use dma_dev in the
PRIME import helpers, if set.
v2:
- acquire internal reference on dma_dev (Jani)
- add DMA-controller usecase to docs (Maxime)
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Maxime Ripard <mripard@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20250307080836.42848-2-tzimmermann@suse.de
The cursor scanout address requires alignment to a multiple of 8,
but does not require page alignment. Change the offset calculation
accordingly. Frees up a few more bytes for the primary framebuffer.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250305163207.267650-8-tzimmermann@suse.de
Helpers compute the offset and size of the available framebuffer
memory. Remove the obsolete field vram_fb_available from struct
ast_device. Also define the cursor-signature size next to its only
user.
v2:
- initialize plane size
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250305163207.267650-7-tzimmermann@suse.de
The ast driver stores the primary plane's image in the framebuffer
memory up to where the cursor is located. Add helpers to calculate
the offset and size.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250305163207.267650-6-tzimmermann@suse.de
Add register constants for VGACR99 and use them when detecting the
size of the VGA memory. Aligns the code with the programming manual.
Also replace literal size values with Linux' SZ_ size constants.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250305163207.267650-4-tzimmermann@suse.de
Ast's AST_VIDMEM_SIZE_ constants enumerate supported video-memory
sizes from 8 MiB to 128 MiB. Replace them with Linux' SZ_ constants
of the same value. When expanded, the literal values remain the same.
The size constant for 128 MiB is unused and the default size is not
necessary. Remove both of them.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250305163207.267650-2-tzimmermann@suse.de
We have enabled PROVE_LOCKING (which enables LOCKDEP) in drm-ci.
This will output warnings when kernel locking errors are encountered
and will continue executing tests. To detect if lockdep has been
triggered, check the debug_locks value in /proc/lockdep_stats after
the tests have run. When debug_locks is 0, it indicates that lockdep
has detected issues and turned itself off. Check this value, and if
lockdep is detected, exit with an error and configure it as a warning
in GitLab CI.
GitLab CI ignores exit codes other than 1 by default. Pass the correct
exit code with variable FF_USE_NEW_BASH_EVAL_STRATEGY set to true or
exit on failure.
Also update the documentation.
Acked-by: Helen Koike <helen.fornazier@gmail.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250217053719.442644-4-vignesh.raman@collabora.com
Signed-off-by: Vignesh Raman <vignesh.raman@collabora.com>
Update the Documentation to be more precise.
v2: Update for clarity
v3: Further details in Todo
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Anusha Srivatsa <asrivats@redhat.com>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/640856/?series=144073&rev=5
The xa_store() may fail due to memory allocation failure because there
is no guarantee that the index is already used. This fix introduces new
paths to handle the error.
This patch also aligns the order of function calls by calling
vmw_bo_add_detached_resource() before ttm_prime_object_init() in order
to allow consistent error handling.
Fixes: d6667f0ddf ("drm/vmwgfx: Fix handling of dumb buffers")
Signed-off-by: Keisuke Nishimura <keisuke.nishimura@inria.fr>
Signed-off-by: Zack Rusin <zack.rusin@broadcom.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250225145223.34773-1-keisuke.nishimura@inria.fr
Because sync_files are passive waiters they do not participate in
the processing of fences like the traditional vmw_fence_wait IOCTL.
If userspace exclusively uses sync_files for synchronization then
nothing in the kernel actually processes fence updates as interrupts
for fences are masked and ignored if the kernel does not indicate to the
SVGA device that there are active waiters.
This oversight results in a bug where the entire GUI can freeze waiting
on a sync_file that will never be signalled as we've masked the interrupts
to signal its completion. This bug is incredibly racy as any process which
interacts with the fencing code via the 3D stack can process the stuck
fences on behalf of the stuck process causing it to run again. Even a
simple app like eglinfo is enough to resume the stuck process. Usually
this bug is seen at a login screen like GDM because there are no other
3D apps running.
By adding a seqno waiter we re-enable interrupt based processing of the
dma_fences associated with the sync_file which is signalled as part of a
dma_fence_callback.
This has likely been broken since it was initially added to the kernel in
2017 but has gone unnoticed until mutter recently started using sync_files
heavily over the course of 2024 as part of their explicit sync support.
Fixes: c906965dee ("drm/vmwgfx: Add export fence to file descriptor support")
Signed-off-by: Ian Forbes <ian.forbes@broadcom.com>
Signed-off-by: Zack Rusin <zack.rusin@broadcom.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250228200633.642417-1-ian.forbes@broadcom.com
Bump the minor version of vmwgfx in order to detect releases where the
cursor issues have been fixed.
Cursors created with dumb buffer were broken on vmwgfx. Userspace (e.g.
kwin) has workarounds for those issues and often disables hardware
cursors on vmwgfx. This allows enabling hardware cursors on vmwgfx
again.
Signed-off-by: Zack Rusin <zack.rusin@broadcom.com>
Reviewed-by: Maaz Mombasawala <maaz.mombasawala@broadcom.com>
Reviewed-by: Martin Krastev <martin.krastev@broadcom.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250307125836.3877138-3-zack.rusin@broadcom.com
Refactor cursor handling to make the code maintainable again. Over the
last 12 years the svga device improved support for virtualized cursors
and at the same time the drm interfaces evolved quite a bit from
pre-atomic to current atomic ones. vmwgfx only added new code over
the years, instead of adjusting/refactoring the paths.
Export the cursor plane handling to its own file. Remove special
handling of the legacy cursor support to make it fit within the global
cursor plane mechanism.
Finally redo dirty tracking because memcmp never worked correctly
resulting in the cursor not being properly updated in the guest.
Signed-off-by: Zack Rusin <zack.rusin@broadcom.com>
Reviewed-by: Maaz Mombasawala <maaz.mombasawala@broadcom.com>
Reviewed-by: Martin Krastev <martin.krastev@broadcom.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250307125836.3877138-2-zack.rusin@broadcom.com
psb_intel_ddc_probe() was added in 2011 by
commit 89c78134cc ("gma500: Add Poulsbo support")
but has remained unused (probably because drm_get_edid is used
instead).
Remove it.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Signed-off-by: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250308234356.255114-1-linux@treblig.org
Some GSP RPC commands need a new reply policy: "caller don't care about
the message content but want to make sure a reply is received". To
support this case, a new reply policy is introduced.
NV_VGPU_MSG_FUNCTION_ALLOC_MEMORY is a large GSP RPC command. The actual
required policy is NVKM_GSP_RPC_REPLY_POLL. This can be observed from the
dump of the GSP message queue. After the large GSP RPC command is issued,
GSP will write only an empty RPC header in the queue as the reply.
Without this change, the policy "receiving the entire message" is used
for NV_VGPU_MSG_FUNCTION_ALLOC_MEMORY. This causes the timeout of receiving
the returned GSP message in the suspend/resume path.
Introduce the new reply policy NVKM_GSP_RPC_REPLY_POLL, which waits for
the returned GSP message but discards it for the caller. Use the new policy
NVKM_GSP_RPC_REPLY_POLL on the GSP RPC command
NV_VGPU_MSG_FUNCTION_ALLOC_MEMORY.
Fixes: 50f290053d ("drm/nouveau: support handling the return of large GSP message")
Cc: Danilo Krummrich <dakr@kernel.org>
Cc: Alexandre Courbot <acourbot@nvidia.com>
Tested-by: Ben Skeggs <bskeggs@nvidia.com>
Signed-off-by: Zhi Wang <zhiw@nvidia.com>
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20250227013554.8269-3-zhiw@nvidia.com
There can be multiple cases of handling the GSP RPC messages, which are
the reply of GSP RPC commands according to the requirement of the
callers and the nature of the GSP RPC commands.
The current supported reply policies are "callers don't care" and "receive
the entire message" according to the requirement of the callers. To
introduce a new policy, factor out the current RPC command reply polices.
Also, centralize the handling of the reply in a single function.
Factor out NVKM_GSP_RPC_REPLY_NOWAIT as "callers don't care" and
NVKM_GSP_RPC_REPLY_RECV as "receive the entire message". Introduce a
kernel doc to document the policies. Factor out
r535_gsp_rpc_handle_reply().
No functional change is intended for small GSP RPC commands. For large GSP
commands, the caller decides the policy of how to handle the returned GSP
RPC message.
Cc: Ben Skeggs <bskeggs@nvidia.com>
Cc: Alexandre Courbot <acourbot@nvidia.com>
Signed-off-by: Zhi Wang <zhiw@nvidia.com>
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20250227013554.8269-2-zhiw@nvidia.com
Add a list of possible encoders to the connector configuration and
helpers to attach and detach them.
Now that the default configuration has its connector and encoder
correctly, configure the output following the configuration.
Reviewed-by: Louis Chauvet <louis.chauvet@bootlin.com>
Co-developed-by: Louis Chauvet <louis.chauvet@bootlin.com>
Signed-off-by: Louis Chauvet <louis.chauvet@bootlin.com>
Signed-off-by: José Expósito <jose.exposito89@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250218101214.5790-15-jose.exposito89@gmail.com
Signed-off-by: Maxime Ripard <mripard@kernel.org>
Add a list of connectors to vkms_config and helper functions to add and
remove as many connectors as wanted.
For backwards compatibility, add one enabled connector to the default
configuration.
A future patch will allow to attach connectors and encoders, but for the
moment there are no changes in the way the output is configured.
Reviewed-by: Louis Chauvet <louis.chauvet@bootlin.com>
Co-developed-by: Louis Chauvet <louis.chauvet@bootlin.com>
Signed-off-by: Louis Chauvet <louis.chauvet@bootlin.com>
Signed-off-by: José Expósito <jose.exposito89@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250218101214.5790-14-jose.exposito89@gmail.com
Signed-off-by: Maxime Ripard <mripard@kernel.org>
Add a list of possible CRTCs to the encoder configuration and helpers to
attach and detach them.
Now that the default configuration has its encoder and CRTC correctly
attached, configure the output following the configuration.
Reviewed-by: Louis Chauvet <louis.chauvet@bootlin.com>
Co-developed-by: Louis Chauvet <louis.chauvet@bootlin.com>
Signed-off-by: Louis Chauvet <louis.chauvet@bootlin.com>
Signed-off-by: José Expósito <jose.exposito89@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250218101214.5790-13-jose.exposito89@gmail.com
Signed-off-by: Maxime Ripard <mripard@kernel.org>
Add a list of encoders to vkms_config and helper functions to add and
remove as many encoders as wanted.
For backwards compatibility, add one encoder to the default
configuration.
A future patch will allow to attach encoders and CRTCs, but for the
moment there are no changes in the way the output is configured.
Reviewed-by: Louis Chauvet <louis.chauvet@bootlin.com>
Co-developed-by: Louis Chauvet <louis.chauvet@bootlin.com>
Signed-off-by: Louis Chauvet <louis.chauvet@bootlin.com>
Signed-off-by: José Expósito <jose.exposito89@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250218101214.5790-12-jose.exposito89@gmail.com
Signed-off-by: Maxime Ripard <mripard@kernel.org>
