This is a snapshot of the ddr cooling device driver from msm-5.10 as
of commit 36bd801b76c2 ("drivers: thermal: ddr-cdev: Add DDR bus
width property support").
Add support to get DDR frequency table from its own devicetree.
Updates:
- Change GPL v2 to GPL
Change-Id: If506dc7182033dce2a93863f736553c2b42437a3
Signed-off-by: Manaf Meethalavalappu Pallikunhi <quic_manafm@quicinc.com>
Signed-off-by: Rashid Zafar <quic_rzafar@quicinc.com>
Add a snapshot of cpu hotplug cooling device driver from msm-5.10 as
of commit 3ea553e19355 ("drivers: thermal: cpu_hotplug_cdev: Use work
queue to execute mitigation").
Updates:
- Change GPL v2 license to GPL
Change-Id: I7881ee4b2817c943bd15699d68d73f738bd3711c
Signed-off-by: Manaf Meethalavalappu Pallikunhi <quic_manafm@quicinc.com>
Signed-off-by: Rashid Zafar <quic_rzafar@quicinc.com>
This is a snapshot of the cpu_voltage cooling device driver from
msm-5.10 as of commit 07b06da60fbb ("drivers: thermal: cpu_voltage:
Update the cooling device naming").
Updates:
- Change GPL v2 license to GPL
Change-Id: I6ffa3773970a279d90e813b3ff88e0afe414308f
Signed-off-by: Manaf Meethalavalappu Pallikunhi <quic_manafm@quicinc.com>
Signed-off-by: Rashid Zafar <quic_rzafar@quicinc.com>
Add new sdr thermistors support. The support includes for
the qmi sensors sdr0_pa, sdr1_pa.
Change-Id: If6019170095d55e41c617be14865f5079390430b
Signed-off-by: Priyansh Jain <quic_priyjain@quicinc.com>
Add support for modem epm sensors to QMI TS sensors list.
It enables apps to monitor these sensors from thermal framework.
Change-Id: Ibf80aefa002f8a3cc85ac23b337069103fe2245e
Signed-off-by: Manaf Meethalavalappu Pallikunhi <quic_manafm@quicinc.com>
Add support for new sdr scg modem qmi cooling devices to QMI cooling
device driver. These cooling devices can be used to mitigate
modem subsystem at high temperature via qmi interface.
Change-Id: I6503e75d53dc0456dd90401a6a1af02c10fa4e41
Signed-off-by: Manaf Meethalavalappu Pallikunhi <quic_manafm@quicinc.com>
The thermal framework doesn't have any cooling device name length
limit check. So use the same qmi device name length for qmi
cooling device as well so that both qmi device name and thermal
framework cooling device name will be used the same name.
Change-Id: I373107c5eb17852dd98d0fa787839e65284690fa
Signed-off-by: Manaf Meethalavalappu Pallikunhi <quic_manafm@quicinc.com>
This is a snapshot taken of qmi_cooling driver from msm-5.15
commit e40c031f04e1 ("drivers: thermal: qmi_cooling: Add
support for extended device list").
Updates:
- Change GPL v2 license to GPL
- Added qmi cooling driver description to kernel config
- Updated Makefile
Change-Id: Ia4a95cc2a85348d27691c4e52513e996dd1a5990
Signed-off-by: Rashid Zafar <quic_rzafar@quicinc.com>
Add support for trend estimation callback. Since BCL soc update is
happening in software worker thread and soc stays longer duration in
same state compared to thermal sensor. It leads to a case where before
handling thermal zone update completely on threshold update, there is
a chance that another thermal zone update context can happen in
parallel due to userspace clients update or due to polling thread
context. This causes the trend stays stable for longer duration.
This will not help in mitigating using step wise algorithm.
Adding this trend estimation callback will return a raising
trend during bcl soc trip high violation, a dropping trend during
trip low vilation and fallback to default core trend estimation for
otherwise. This will help step wise algorithm to determine the
next mitigation actions.
Change-Id: Ib59eadbb497cf5775bda4888e0d93b3378d46798
Signed-off-by: Manaf Meethalavalappu Pallikunhi <quic_manafm@quicinc.com>
Whenever a thermal zone is in trip violated state, there is a chance
that the same thermal zone mode can be disabled either via
thermal core API or via thermal zone sysfs. But thermal core doesn't
guarantee that it will clear all mitigation on disabling thermal zone.
Monitor thermal zone mode_change callback in different sensor drivers
and add support to clear all mitigation on thermal zone disablement.
Change-Id: I82720be5b1b9016d218f9a1c39315da794a2a330
Signed-off-by: Manaf Meethalavalappu Pallikunhi <quic_manafm@quicinc.com>
This is a snapshot of the thermal framework from msm-5.10 as of
commit f5a9cf8e4b17 ("drivers: qmi_sensor: Re-configure qmi sensor
trip on subsystem restart").
Updates:
- Change GPL v2 license to GPL
Change-Id: If2681995379274a5d9d641d0dce2b4f9ec07edb6
Signed-off-by: Manaf Meethalavalappu Pallikunhi <quic_manafm@quicinc.com>
Signed-off-by: Rashid Zafar <quic_rzafar@quicinc.com>
Add a snapshot of policy engine driver from msm-5.10 as of commit
2883589c93f8 ("drivers: thermal: pe_sensor: Add support for trend
estimation").
Updates:
- Change GPL v2 license to GPL
Change-Id: I403d7e26fb31d882c493071ed9826b4861ec87cd
Signed-off-by: Manaf Meethalavalappu Pallikunhi <quic_manafm@quicinc.com>
Signed-off-by: Rashid Zafar <quic_rzafar@quicinc.com>
The tsens driver caches last read temperature during tsens interrupt
violation and notifies framework so that framework will use this
cached temperature value instead of new register read. This cached
temperature variable will be reset once set trip API gets called for
the same sensor. But some reason if set trip API is not called for
the same sensor during notification, this cached temperature variable
won't reset. It leads to a case where if next tsens violation happens
for same sensor, interrupt handler will read this temperature and
re-arm previous threshold without notifying thermal framework. It can
cause spurious interrupt scenario for tsens.
Reset cached temperature value just after thermal framework
notification in tsens irq handler.
Change-Id: I9707bf5fd245df404122f137b586e4a286be2eee
Signed-off-by: Manaf Meethalavalappu Pallikunhi <quic_manafm@quicinc.com>
Cache the trip temperature for the thermal framework to read. Once the
trip occurs the temperature at which the trip or trip clear is cached
till the thermal framework sets a new trip value. This will ensure that
the thermal framework will read the exact temperature as the driver and
it cannot go out of sync.
Change-Id: Ie44ee0e1e7e4acf3a08f47f1204e6d2ab1a8100f
Signed-off-by: Manaf Meethalavalappu Pallikunhi <quic_manafm@quicinc.com>
Add ipc logging support to tsens driver. It enables two separate ipc
logging circular buffer for tsens. The first one dumps different
temperature sensor read value whenever there is a read request.
The second one dumps different sensor thresholds, interrupt status etc.
whenever there is tsens interrupt trigger or set trip call from
thermal framework.
Change-Id: Ib7964571547c222838b1fa45a19b3bdb7b837116
Signed-off-by: Manaf Meethalavalappu Pallikunhi <quic_manafm@quicinc.com>
Add remote debugger device configuration. The Remote Debugger driver
allows a debugger running on a host PC to communicate with a remote
stub running on peripheral subsystems.
Change-Id: Ib3faed59b8f54213341aa52248e33091fffea061
Signed-off-by: Devender Kaushik <quic_dkaushik@quicinc.com>
These changes enable IPCC_COMPUTE_L0 signals and
broadcast client. These will be used by the new IPCLite
communication protocol to communicate with
remote subsystems over compute_l0 interrupt line.
Change-Id: I7aac6f121c53136b8cc19f1d1e166ccc2d59caee
Signed-off-by: smaniar <smaniar@codeaurora.org>
Log qrtr rx packet in kernel logs which caused system wakeup.
This will help to easily identify wakeup packet.
The qrtr module is required to be in first stage init to support
the creation of qrtr sockets. The transport layers are often in second
stage init. The current wakeup prints depend on some information from
the second stage init. Rework the logic so the dependency is only
between the qrtr transport and transport drivers.
Change-Id: I4a6a35dd4d5449a671464c00f90712a79d6044fe
Signed-off-by: Deepak Kumar Singh <deesin@codeaurora.org>
Signed-off-by: Chris Lew <quic_clew@quicinc.com>
Add tmecom, hwkm and ice-crypto drivers for pineapple.
These are mainly used for supporting storage encryption
using HWKM (residing in TME).
Change-Id: I38c97654a643f8545bd56aa559ccba588aabbb90
Signed-off-by: Smita Ghosh <quic_smitag@quicinc.com>
Signed-off-by: Gaurav Kashyap <quic_gaurkash@quicinc.com>
Enable the USB GSI driver to support tethering interfaces, such as RNDIS
and RmNET.
Change-Id: I0273e97f7656e1cca4a353b55e7254053352b2b9
Signed-off-by: Wesley Cheng <quic_wcheng@quicinc.com>
Add symbols being used by the USB f_gsi function driver.
Change-Id: I5102ae04665e5eca291855f05157159c3e37d313
Signed-off-by: Wesley Cheng <quic_wcheng@quicinc.com>
