Add a function that helps identify if the rate provided needs to
be overridden. For this we need a function that compares the rate
provided and bitmask of rates provided in VBT.
--v2
-Rename functions [Jani]
-Return the mask instead of parsing it in function [Jani]
-Move the declaration in header [Jani]
--v3
-Change function name to depict what the function does [Ankit]
--v4
-Lets not use hweight [Ankit]
Signed-off-by: Suraj Kandpal <suraj.kandpal@intel.com>
Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Link: https://lore.kernel.org/r/20250821042653.269227-3-suraj.kandpal@intel.com
Add edp_data_rate_override field VBT which gives us a mask
of rates which needs to be skipped in favour of
subsequent higher rate.
--v2
-Rename vbt field [Jani]
-Fix comment to 263+ [Jani]
-Use BIT_U32 [Jani]
-Fix the bits assignment in vbt [Jani]
--v3
-Add a mask which represents all link rates [Ankit]
Bspec: 20124
Signed-off-by: Suraj Kandpal <suraj.kandpal@intel.com>
Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Link: https://lore.kernel.org/r/20250821042653.269227-2-suraj.kandpal@intel.com
Currently intel_psr_work is continuing to activation of PSR which was just
disabled when irq_aux_error == true.
Fix this by skipping everything else than intel_psr_handle_irq in
intel_psr_work when irq_aux_error == true.
Signed-off-by: Jouni Högander <jouni.hogander@intel.com>
Reviewed-by: Mika Kahola <mika.kahola@intel.com>
Link: https://lore.kernel.org/r/20250815084534.1637030-3-jouni.hogander@intel.com
pwm_level_max maybe 0 we do throw a warning but move ahead with
execution which may later cause a /0 error.
--v2
-return if the warn_on gets hit [Jani]
Signed-off-by: Suraj Kandpal <suraj.kandpal@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Link: https://lore.kernel.org/r/20250819160438.145734-1-suraj.kandpal@intel.com
Underrun on idle PSR workaround (Wa_16025596647) is supposed to be
applied only when pkg c latency > delayed vblank. Currently we are
applying it always when other criterias are met.
Fix this by adding new boolean flag which is supposed to be set when
calculating watermark levels and pkgc latency > delayed vblank is
detected. currently this scenario is blocked but might be added
later. Due to this add also TODO comment into
skl_max_wm_level_for_vblank.
Bspec: 74151
Signed-off-by: Jouni Högander <jouni.hogander@intel.com>
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Link: https://lore.kernel.org/r/20250519075223.443266-1-jouni.hogander@intel.com
Store fsb_freq and mem_freq in dram info the same way we do for other
memory info on later platforms for a slightly more unified approach.
This allows us to remove fsb_freq, mem_freq and is_ddr3 members from
struct drm_i915_private and struct xe_device.
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://lore.kernel.org/r/a38c4b105ba9098fa0b128cb86cd4eb63bcc27e8.1755511595.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Non-display now calls the intel_fsb_freq() and intel_mem_freq()
functions, so we don't have to have the frequencies initialized for dg2
or non-display cases.
This is in preparation for unifying the pre-gen9 handling in dram info.
DG2 remains a special case as described in commit 5eb6bf0b44
("drm/i915/dg2: Don't read DRAM info").
v2: Rebase
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://lore.kernel.org/r/7bfed06d431354f3918ea73d43a2ec8ed9426a76.1755511595.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Both i915_switcheroo_set_state() and i915_switcheroo_can_switch() check
for i915 == NULL. Commit d2e184f8e1 ("drm/i915/switcheroo: pass
display to HAS_DISPLAY()") started dereferencing it before the NULL
check. Fix it.
Fixes: d2e184f8e1 ("drm/i915/switcheroo: pass display to HAS_DISPLAY()")
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Closes: https://lore.kernel.org/r/202508160035.hmzuKiww-lkp@intel.com/
Cc: Gustavo Sousa <gustavo.sousa@intel.com>
Reviewed-by: Gustavo Sousa <gustavo.sousa@intel.com>
Link: https://lore.kernel.org/r/20250818071605.2541523-1-jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Update intel_dp_compute_config_limits() to use a minimum of
30 bits per pixel when the connector is in HDR mode
(specifically, when EOTF is SMPTE ST2084), aligning with HDR
display requirements.
To support this, the function now takes a drm_connector_state
instead of an intel_connector, and the required updates are
made in all call sites, including MST handling.
This ensures sufficient bitdepth for HDR content to avoid
banding.
If the required bandwidth for 30 bpp cannot be supported,
the driver will either fall back to DSC or reject the mode
during atomic check if DSC is not supported.
Signed-off-by: Chaitanya Kumar Borah <chaitanya.kumar.borah@intel.com>
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Signed-off-by: Suraj Kandpal <suraj.kandpal@intel.com>
Link: https://lore.kernel.org/r/20250730055523.2214966-3-chaitanya.kumar.borah@intel.com
The intel_dp_in_hdr_mode() helper was previously defined in
intel_dp_aux_backlight.c but is generally useful beyond that
context. Move the function to intel_dp.c and declare it in
intel_dp.h to make it accessible to other DP-related code
paths that need to check HDR metadata state.
This is a pure refactor with no functional change and
prepares for a follow-up patch that uses this helper.
Signed-off-by: Chaitanya Kumar Borah <chaitanya.kumar.borah@intel.com>
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Signed-off-by: Suraj Kandpal <suraj.kandpal@intel.com>
Link: https://lore.kernel.org/r/20250730055523.2214966-2-chaitanya.kumar.borah@intel.com
There shouldn't be anything requiring irqs to be enabled at the point of
LPE audio setup. Regardless, we've never hit the warning, as irqs are
always enabled at the time LPE audio is initialized. Drop the
superfluous warning, and the dependency on i915_drv.h.
Fix style a bit while at it.
Reviewed-by: Vinod Govindapillai <vinod.govindapillai@intel.com>
Link: https://lore.kernel.org/r/20250801122832.249985-1-jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
All the places that use DSPCLK_GATE_D are specific to certain platforms,
and the parametrization of it to support VLV/CHV MMIO display base isn't
really buying us anything. Add a separate macro for VLV_DSPCLK_GATE_D
and use it.
Reviewed-by: Gustavo Sousa <gustavo.sousa@intel.com>
Link: https://lore.kernel.org/r/ac16d9d5192595944bf9bcf70aa721b504bc90c0.1754499175.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Underneath, the HAS_PCH_NOP(), DISPLAY_VER(), HAS_FBC(), and
HAS_HOTPLUG() macros really expect a struct intel_display. Switch to it
in preparation for removing the transitional __to_intel_display() macro.
Reviewed-by: Gustavo Sousa <gustavo.sousa@intel.com>
Link: https://lore.kernel.org/r/de3302dd9ebc21226a9dadcbcdeeaf01e57186be.1754499175.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Commit 8d9908e8fe ("drm/i915/display: remove small micro-optimizations
in irq handling") not only removed the optimizations, it also enabled
wakeref asserts for the GEN11_GU_MISC_IIR access. Silence the asserts by
wrapping the access inside intel_display_rpm_assert_{block,unblock}().
Reported-by: "Jason A. Donenfeld" <Jason@zx2c4.com>
Closes: https://lore.kernel.org/r/aG0tWkfmxWtxl_xc@zx2c4.com
Fixes: 8d9908e8fe ("drm/i915/display: remove small micro-optimizations in irq handling")
Cc: stable@vger.kernel.org # v6.13+
Suggested-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Jouni Högander <jouni.hogander@intel.com>
Link: https://lore.kernel.org/r/20250805115656.832235-1-jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
WCL has 3 pipes and two TC ports, create power well mapping to reflect
HW. Rest remains similar to Xe3 power well configuration.
v2: Remove TC3/4 ports as they do not exist.
Signed-off-by: Chaitanya Kumar Borah <chaitanya.kumar.borah@intel.com>
Reviewed-by: Gustavo Sousa <gustavo.sousa@intel.com>
Link: https://lore.kernel.org/r/20250808081931.4101388-1-chaitanya.kumar.borah@intel.com
Signed-off-by: Gustavo Sousa <gustavo.sousa@intel.com>
Debug print the TypeC pin assignment and max lane count value during HW
readout and after resetting the TypeC mode.
Reviewed-by: Mika Kahola <mika.kahola@intel.com>
Link: https://lore.kernel.org/r/20250805073700.642107-20-imre.deak@intel.com
Signed-off-by: Imre Deak <imre.deak@intel.com>
Cache the pin assignment value. This is more consistent with the way the
max lane count value is tracked and a bit more efficient than reading
out the same value from HW each time it's queried.
Reviewed-by: Mika Kahola <mika.kahola@intel.com>
Link: https://lore.kernel.org/r/20250805073700.642107-19-imre.deak@intel.com
Signed-off-by: Imre Deak <imre.deak@intel.com>
The pin assignment is only relevant in case the PHY is owned by the
display, that is in legacy and DP-alt mode. In TBT-alt mode the PHY is
owned by the TBT FW/driver and so the pin assignment/configuration is
managed by those components. A follow-up change will cache the pin
assignment value in all the TypeC modes - querying this by calling
get_pin_assignment() - prepare for that here, by reporting pin
assignment NONE in the TBT-alt mode.
Reviewed-by: Mika Kahola <mika.kahola@intel.com>
Link: https://lore.kernel.org/r/20250805073700.642107-18-imre.deak@intel.com
Signed-off-by: Imre Deak <imre.deak@intel.com>
Pass the intel_tc_port pointer instead of intel_digital_port to all lane
mask and count query helpers internal to intel_tc.c, to avoid the
redundant intel_digital_port -> intel_tc_port conversions.
While at it shorten the function names, keeping the intel_tc_port_
prefix only for exported functions and use the mtl_, icl_ prefixes
making it clear which platforms a given query function is specific for.
Reviewed-by: Mika Kahola <mika.kahola@intel.com>
Link: https://lore.kernel.org/r/20250805073700.642107-17-imre.deak@intel.com
Signed-off-by: Imre Deak <imre.deak@intel.com>
For consistency, handle the case where
intel_tc_port_get_pin_assignment() is called for a non-TypeC encoder,
returning the default NONE pin assignment value, similarly to how this
is done in intel_tc_port_max_lane_count().
Reviewed-by: Mika Kahola <mika.kahola@intel.com>
Link: https://lore.kernel.org/r/20250805073700.642107-16-imre.deak@intel.com
Signed-off-by: Imre Deak <imre.deak@intel.com>
Unify the way to get the pin assignment on all platforms. This removes
the duplication in the helper functions in this and a follow-up change.
Reviewed-by: Mika Kahola <mika.kahola@intel.com>
Link: https://lore.kernel.org/r/20250805073700.642107-14-imre.deak@intel.com
Signed-off-by: Imre Deak <imre.deak@intel.com>
Validate the pin assignment on ICL-TGL, similarly to how this is done on
MTL+. ICL supports all the pin assignments, while TGL+ supports only the
NONE, C, D, E pin assignments.
Reviewed-by: Mika Kahola <mika.kahola@intel.com>
Link: https://lore.kernel.org/r/20250805073700.642107-13-imre.deak@intel.com
Signed-off-by: Imre Deak <imre.deak@intel.com>
For consistency, handle pin assignment NONE on all platforms similarly
to LNL+. On earlier platforms the driver doesn't actually see this pin
assignment - as it's not valid on a connected DP-alt PHY - however it's
a valid HW setting even on those platforms, for instance in legacy mode.
Handle this pin assignment on earlier platforms as well, so that the way
to query the pin assignment can be unified by a follow-up change.
Reviewed-by: Mika Kahola <mika.kahola@intel.com>
Link: https://lore.kernel.org/r/20250805073700.642107-12-imre.deak@intel.com
Signed-off-by: Imre Deak <imre.deak@intel.com>
Pass around the pin assignment value via the corresponding enum instead
of a plain integer.
While at it rename intel_tc_port_get_pin_assignment_mask() to
intel_tc_port_get_pin_assignment(), since the value returned is not a
mask.
Reviewed-by: Mika Kahola <mika.kahola@intel.com>
Link: https://lore.kernel.org/r/20250805073700.642107-11-imre.deak@intel.com
Signed-off-by: Imre Deak <imre.deak@intel.com>
Add an enum for the TypeC pin assignment, which is a better way to pass
its value around than a plain integer. While at it add a description for
each pin assignment, based on the DP and DP Alt mode Standards, opting
for more details to ease any future debugging related to a given pin
assignment and the cables / sink types used.
Reviewed-by: Mika Kahola <mika.kahola@intel.com>
[Imre: s/deined/defined in pin assignment enum documentation.]
Link: https://lore.kernel.org/r/20250805073700.642107-10-imre.deak@intel.com
Signed-off-by: Imre Deak <imre.deak@intel.com>
Move asserting the expected TC cold power state and the read out
register value right after reading the TCSS_DDI_STATUS register,
similarly to how this is done with the other PORT_TX_DFLEXDPSP and
PORT_TX_DFLEXPA1 PHY registers.
Reviewed-by: Mika Kahola <mika.kahola@intel.com>
Link: https://lore.kernel.org/r/20250805073700.642107-9-imre.deak@intel.com
Signed-off-by: Imre Deak <imre.deak@intel.com>
Move getting the required display power domain right before reading the
PORT_TX_DFLEXDPSP and PORT_TX_DFLEXPA1 registers, similarly to how this
is done while reading the other TCSS_DDI_STATUS PHY register.
Reviewed-by: Mika Kahola <mika.kahola@intel.com>
Link: https://lore.kernel.org/r/20250805073700.642107-8-imre.deak@intel.com
Signed-off-by: Imre Deak <imre.deak@intel.com>
Use the PHY's cached max lane count value on all platforms similarly to
LNL+. On LNL+ using the cached value is mandatory - since the
corresponding HW register field can get cleared by the time the value is
queried - on earlier platforms there isn't a problem with using the HW
register instead. Having a uniform way to query the value still makes
sense and it's also a bit more efficient, so do that.
Reviewed-by: Mika Kahola <mika.kahola@intel.com>
Link: https://lore.kernel.org/r/20250805073700.642107-7-imre.deak@intel.com
Signed-off-by: Imre Deak <imre.deak@intel.com>
The current wait_panel_status() uses intel_de_wait(),
which internally on Xe platforms calls xe_mmio_wait32().
xe_mmio_wait32() increases poll interval exponentially.
This exponential poll interval increase causes unnessory delays
during resume or power-on when the panel becomes ready earlier,
but polling is delayed due to backoff.
Replace intel_de_wait() with read_poll_timeout() +
intel_de_read() to actively poll the register at a fixed 10ms interval
up to a 5 second timeout. This allows poll to exit
early when panel is ready.
Changes in v2:
Replaced two-phase intel_de_wait() with read_poll_timeout()
+ intel_de_read()
Changes in v3:
- Add poll_interval_ms argument 'wait_panel_status' function.
- Modify 'wait_panel_status' callers with proper poll interval
Changes in v4:
- Change 'wait_panel_off' poll interval to 10ms
Changes in v5:
- Dropped poll_interval_ms parameter,use fixed polling
interval of 10ms (Jani Nikula)
Changes in v6:
- Removed goto in error path
Signed-off-by: Dibin Moolakadan Subrahmanian <dibin.moolakadan.subrahmanian@intel.com>
Link: https://lore.kernel.org/r/20250807082402.79018-1-dibin.moolakadan.subrahmanian@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
