During hw_params call we make sure that the host DMA is stopped but the
hstream->running flag is not explicitly cleared at the same time.
If the host DMA fails to stop during previous use then the flag is left
set and on next start the host DMA will be left disabled since the
trigger:STOP will skip the DMA enable.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://patch.msgid.link/20260730122241.30541-1-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
bui duc phuc <phucduc.bui@gmail.com> says:
This series is the final part of the cleanup to convert ASoC codec
drivers to use the guard() and scoped_guard() helpers for mutex and
spinlock handling.
Compile-tested only.
Link: https://patch.msgid.link/20260731030648.8706-1-phucduc.bui@gmail.com
Clean up the code using guard() for mutex locks.
Merely code refactoring, and no behavior change.
Signed-off-by: bui duc phuc <phucduc.bui@gmail.com>
Reviewed-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://patch.msgid.link/20260731030648.8706-27-phucduc.bui@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Clean up the code using guard() for mutex locks.
Merely code refactoring, and no behavior change.
Reviewed-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Signed-off-by: bui duc phuc <phucduc.bui@gmail.com>
Reviewed-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://patch.msgid.link/20260731030648.8706-26-phucduc.bui@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Clean up the code using guard() for mutex locks.
Merely code refactoring, and no behavior change.
Reviewed-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Signed-off-by: bui duc phuc <phucduc.bui@gmail.com>
Reviewed-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://patch.msgid.link/20260731030648.8706-25-phucduc.bui@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Clean up the code using guard() for mutex locks.
Merely code refactoring, and no behavior change.
Reviewed-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Signed-off-by: bui duc phuc <phucduc.bui@gmail.com>
Reviewed-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://patch.msgid.link/20260731030648.8706-24-phucduc.bui@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Clean up the code using guard() for mutex locks.
Merely code refactoring, and no behavior change.
Reviewed-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Signed-off-by: bui duc phuc <phucduc.bui@gmail.com>
Reviewed-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://patch.msgid.link/20260731030648.8706-23-phucduc.bui@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Clean up the code using guard() for mutex locks.
Merely code refactoring, and no behavior change.
Reviewed-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Signed-off-by: bui duc phuc <phucduc.bui@gmail.com>
Reviewed-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://patch.msgid.link/20260731030648.8706-22-phucduc.bui@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Clean up the code using guard() for mutex locks.
Merely code refactoring, and no behavior change.
Reviewed-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Signed-off-by: bui duc phuc <phucduc.bui@gmail.com>
Reviewed-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://patch.msgid.link/20260731030648.8706-21-phucduc.bui@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Clean up the code using guard() for mutex locks.
Merely code refactoring, and no behavior change.
Reviewed-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Signed-off-by: bui duc phuc <phucduc.bui@gmail.com>
Reviewed-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://patch.msgid.link/20260731030648.8706-20-phucduc.bui@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Clean up the code using guard() for mutex locks.
Merely code refactoring, and no behavior change.
Reviewed-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Signed-off-by: bui duc phuc <phucduc.bui@gmail.com>
Reviewed-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://patch.msgid.link/20260731030648.8706-19-phucduc.bui@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Clean up the code using guard() for mutex locks.
Merely code refactoring, and no behavior change.
Reviewed-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Signed-off-by: bui duc phuc <phucduc.bui@gmail.com>
Reviewed-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://patch.msgid.link/20260731030648.8706-18-phucduc.bui@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Clean up the code using guard() for mutex & spin locks.
Merely code refactoring, and no behavior change.
Reviewed-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Signed-off-by: bui duc phuc <phucduc.bui@gmail.com>
Reviewed-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://patch.msgid.link/20260731030648.8706-17-phucduc.bui@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Clean up the code using guard() for mutex locks.
Merely code refactoring, and no behavior change.
Signed-off-by: bui duc phuc <phucduc.bui@gmail.com>
Reviewed-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://patch.msgid.link/20260731030648.8706-16-phucduc.bui@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Clean up the code using guard() for mutex locks.
Merely code refactoring, and no behavior change.
Signed-off-by: bui duc phuc <phucduc.bui@gmail.com>
Reviewed-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://patch.msgid.link/20260731030648.8706-15-phucduc.bui@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Clean up the code using guard() for mutex locks.
Merely code refactoring, and no behavior change.
Signed-off-by: bui duc phuc <phucduc.bui@gmail.com>
Reviewed-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://patch.msgid.link/20260731030648.8706-14-phucduc.bui@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Clean up the code using guard() for mutex locks.
Merely code refactoring, and no behavior change.
Signed-off-by: bui duc phuc <phucduc.bui@gmail.com>
Reviewed-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://patch.msgid.link/20260731030648.8706-13-phucduc.bui@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Clean up the code using guard() for mutex locks.
Merely code refactoring, and no behavior change.
Signed-off-by: bui duc phuc <phucduc.bui@gmail.com>
Reviewed-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://patch.msgid.link/20260731030648.8706-11-phucduc.bui@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Clean up the code using guard() for mutex locks.
Merely code refactoring, and no behavior change.
Signed-off-by: bui duc phuc <phucduc.bui@gmail.com>
Reviewed-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://patch.msgid.link/20260731030648.8706-10-phucduc.bui@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Clean up the code using guard() for mutex locks.
Merely code refactoring, and no behavior change.
Signed-off-by: bui duc phuc <phucduc.bui@gmail.com>
Reviewed-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://patch.msgid.link/20260731030648.8706-9-phucduc.bui@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Clean up the code using guard() for mutex & spin locks.
Merely code refactoring, and no behavior change.
Signed-off-by: bui duc phuc <phucduc.bui@gmail.com>
Reviewed-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://patch.msgid.link/20260731030648.8706-8-phucduc.bui@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Clean up the code using guard() for mutex locks.
Merely code refactoring, and no behavior change.
Signed-off-by: bui duc phuc <phucduc.bui@gmail.com>
Reviewed-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://patch.msgid.link/20260731030648.8706-7-phucduc.bui@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Clean up the code using guard() for mutex locks.
Merely code refactoring, and no behavior change.
Signed-off-by: bui duc phuc <phucduc.bui@gmail.com>
Reviewed-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://patch.msgid.link/20260731030648.8706-6-phucduc.bui@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Clean up the code using guard() for mutex locks.
Merely code refactoring, and no behavior change.
Signed-off-by: bui duc phuc <phucduc.bui@gmail.com>
Reviewed-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://patch.msgid.link/20260731030648.8706-5-phucduc.bui@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Clean up the code using guard() for mutex locks.
Merely code refactoring, and no behavior change.
Signed-off-by: bui duc phuc <phucduc.bui@gmail.com>
Reviewed-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://patch.msgid.link/20260731030648.8706-4-phucduc.bui@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Clean up the code using guard() for mutex locks.
Merely code refactoring, and no behavior change.
Signed-off-by: bui duc phuc <phucduc.bui@gmail.com>
Reviewed-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://patch.msgid.link/20260731030648.8706-3-phucduc.bui@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Clean up the code using guard() for mutex locks.
Merely code refactoring, and no behavior change.
Signed-off-by: bui duc phuc <phucduc.bui@gmail.com>
Reviewed-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://patch.msgid.link/20260731030648.8706-2-phucduc.bui@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
When the peripheral re-attaches after the SoundWire controller was
power-gated during system suspend (s2idle reaching S0i3 on AMD ACP), the
amplifier has lost all of its register and DSP state. tas_update_status()
handles that by re-running tas_io_init(), which writes the device's
TAS2783_SW_RESET register - a vendor register write that clears the
device's register file and DSP state, not a SoundWire reset, so no
re-enumeration is involved - and re-downloads the firmware. Before doing
any of that, it syncs back a register cache that still holds the
pre-suspend values.
That sync is useless, since the reset immediately wipes whatever it
wrote, and it leaves the cache claiming that the amplifier is already
powered up and unmuted. Subsequent read-modify-write updates - DAPM
amplifier power-up, SDCA PDE transitions at stream start - then see "no
change" and skip the hardware write. Playback runs without a single
error while the speakers stay silent. Unbinding and rebinding the driver
restores audio, since probe starts from a fresh cache.
Drop the cache instead of syncing it when an uninitialized device
attaches, so that later accesses see the real hardware state.
Reordering the sync after tas_io_init() and marking the cache dirty is
not a workable alternative here: tas_regmap has no .writeable_reg, so
the cache accepts every register up to .max_register, including ones for
which tas2783_sdca_mbq_size() returns 0. regmap_sdw_mbq_size() rejects
those with -EINVAL, so the replay fails on the first such register and
takes initialization down with it.
Cached user settings fall back to hardware defaults across such a power
loss, which seems clearly preferable to a silent amplifier - the device
is being reset and its firmware reloaded at this point anyway.
Tested on an ASUS ProArt PX13 HN7306EAC (AMD Strix Halo, ACP7.0, two
TAS2783 amplifiers plus RT721 on SoundWire link 1): the speakers work
after an s2idle resume with ~51 s of S0i3 residency, where previously
they stayed silent despite a complete firmware re-download.
Fixes: 4cc9bd8d7b ("ASoc: tas2783A: Add soundwire based codec driver")
Reported-by: Antoine Monnet <antoine@montane.tech>
Closes: https://lore.kernel.org/all/c66ae00a-e878-4af0-a05a-272e9574eaa5@montane.tech/
Signed-off-by: Andrey Golovko <andrey.golovko@gmail.com>
Link: https://patch.msgid.link/3e2751d1fb027bed0f09c88e5e56da8f@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Peter Ujfalusi <peter.ujfalusi@linux.intel.com> says:
This series fixes some issues left to the first version
sof_ipc4_mod_init_ext_dp_memory_data payload building code. The
payload to specify memory requirements of Data Processing components,
running as independent processes in SOF firmware.
But more importantly it adds a payload of similar purpose to the
pipeline create message, e.g. sof_ipc4_glb_pipe_payload. It sums up
the memory requirements of individual Low Latency components in the
pipeline and sends the summed up values in pipeline create message.
Link: https://patch.msgid.link/20260730104141.14817-1-peter.ujfalusi@linux.intel.com
Refactor sof_ipc4_widget_mod_init_msg_payload() to be easier to extend.
Signed-off-by: Jyri Sarha <jyri.sarha@linux.intel.com>
Reviewed-by: Liam Girdwood <liam.r.girdwood@intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://patch.msgid.link/20260730104141.14817-7-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Fix a copy-paste error in struct sof_ipc4_mod_init_ext_dp_memory_data
datamember comments. And while at it, drop the overly specific notes
on the datamember values. The values are coming from topology and
and what to do with them is decided in SOF FW. Its a bad idea to try
to document their meaning in detail here. The Linux driver is only
passing the values.
Signed-off-by: Jyri Sarha <jyri.sarha@linux.intel.com>
Reviewed-by: Liam Girdwood <liam.r.girdwood@intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://patch.msgid.link/20260730104141.14817-6-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Start adding payloads to pipeline create messages. The payload
contains information for payload specific memory configuration.
All non DP module instances within the same pipeline share the same
memory attributes and access the same resources. The new logic sums
interim, lifetime, and shared heap memory requirements together and
picks the highest stack requirement of all module instances belonging
to a pipeline. These pipeline specific attributes are sent as struct
sof_ipc4_glb_pipe_payload payload in pipeline's create message.
The idea is to pass common memory configuration for all the Low
Latency modules in the pipeline in pipeline create message payload.
The Data Processing module instances will still have an individual
memory configuration in struct sof_ipc4_mod_init_ext_dp_memory_data
payloads as before. In their payload everything is as it was before,
all attributes are copied directly from their topology attributes.
Signed-off-by: Jyri Sarha <jyri.sarha@linux.intel.com>
Reviewed-by: Liam Girdwood <liam.r.girdwood@intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://patch.msgid.link/20260730104141.14817-5-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Adds SOF_IPC4_GLB_PIPE_EXT_OBJ_ARRAY macros to set extension bit in
SOF_IPC4_GLB_CREATE_PIPELINE indicating presence of the payload, and
all necessary macros and structs to create the payload.
Signed-off-by: Jyri Sarha <jyri.sarha@linux.intel.com>
Reviewed-by: Liam Girdwood <liam.r.girdwood@intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://patch.msgid.link/20260730104141.14817-4-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Remove dp-prefix from all module instance's memory attributes and
related data structures. The attributes are not anymore exclusively
for Data Processing module instances, but generic for all module
instances. However, the module init payload is still only for DP
module instances.
Signed-off-by: Jyri Sarha <jyri.sarha@linux.intel.com>
Reviewed-by: Liam Girdwood <liam.r.girdwood@intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://patch.msgid.link/20260730104141.14817-2-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Check whether the .set_jack callback has already been invoked before the reset.
If so, call rt722_sdca_jack_init() again to restore the jack settings.
Signed-off-by: Shuming Fan <shumingf@realtek.com>
Link: https://patch.msgid.link/20260731084114.4142106-1-shumingf@realtek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Neil Armstrong <neil.armstrong@linaro.org> says:
The Qualcom SM8650 based Ayaneo Pocket S2 gaming device has a set
of 2 WSA speakers connected on the WSA2 lines.
But the Audioreach DSP only handles WSA2 in pair with the WSA
interface by using the upper bits of the active_channels_mask
for WSA2 and the lower bits for WSA:
__________________________________________________
| Bits | 3 | 2 | 1 | 0 |
---------------------------------------------------
| Line | WSA2 Ch2 | WSA2 Ch1 | WSA Ch2 | WSA Ch1 |
---------------------------------------------------
Setting only the WSA2 upper bits is perfectly valid and
functional but the current Audioreach code builds the bitmask
from the channels count with:
active_channels_mask = (1 << num_channels) - 1;
In order to enable the WSA2 bits the channel count should be 4,
but the lower WSA bits are then also enabled and the DSP errors
out when trying to play on the disabled WSA interface.
A solution would've been to add a fake WSA2 topology element which
would be translated into the top bits only, but it's not clean and
add some special exceptions in the generic Audioreach code.
The solution suggested by Srinivas is to use the channel mapping to
set this bitmask.
This works but makes all the other calls using the channel mapping fail
because the DSP requires the channel_mapping table to start from index 0
and using num_channel length in order to apply the mapping on the
active_channels_mask bits in order.
So if you have an active_channels_mask like:
_______________________
| Bits | 3 | 2 | 1 | 0 |
-------------------------
| Mask | 1 | 1 | 0 | 0 |
------------------------
And the channel mapping:
_________________________________
| Channel | 3 | 2 | 1 | 0 |
-----------------------------------
| Mapping | FR | FL | NULL | NULL |
-----------------------------------
Will need to be converted to:
____________________
| Channel | 1 | 0 |
---------------------
| Mapping | FR | FL |
---------------------
And the DSP will map FR on WSA2 Ch2 and FL on WSA2 Ch1 as:
_________________________________
| Line | WSA2 Ch2 | WSA2 Ch1 |
----------------------------------
| Mapping | FR | FL |
----------------------------------
So we need to skip the empty channel mapping entries in all other
users of the channel_map to build valid channel_mapping tables.
This should not break any other usecases since the default channel
mapping always start from index 0, and will add flexibilty to allow
some special non linear mapping for other interfaces as well.
Finally we add a special prepare callback for the Ayaneo PS2 sound card
which sets the custom channel mapping for the WSA interface to make audio
work properly on the gaming device.
Link: https://patch.msgid.link/20260728-topic-sm8650-ayaneo-pocket-s2-wsa2-fix-v3-0-b29f44720178@linaro.org
The WSA Speakers are connected on the WSA2 interface, but the
WSA and WSA2 links are handled as a single dai and DSP interface, so
we need to specify the channel mapping of the Ayaneo Pocket S2 for the
WSA dai in order to have functional playback and avoid DSP errors.
Let's add a special entry for the Ayaneo Pocket S2 adding a prepare
callback in order to set the proper channel mapping.
Reviewed-by: Srinivas Kandagatla <srinivas.kandagatla@oss.qualcomm.com>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patch.msgid.link/20260728-topic-sm8650-ayaneo-pocket-s2-wsa2-fix-v3-3-b29f44720178@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Document the bindings for the sound card on the Ayaneo Pocket S2
which uses the special speaker connection incompatible with
the default SM8650 sound card.
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patch.msgid.link/20260728-topic-sm8650-ayaneo-pocket-s2-wsa2-fix-v3-2-b29f44720178@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
The Qualcom SM8650 based Ayaneo Pocket S2 gaming device has a set
of 2 WSA speakers connected on the WSA2 lines.
But the Audioreach DSP only handles WSA2 in pair with the WSA
interface by using the upper bits of the active_channels_mask
for WSA2 and the lower bits for WSA:
/-------------------------------------------------\
| Bits | 3 | 2 | 1 | 0 |
|-------------------------------------------------|
| Line | WSA2 Ch2 | WSA2 Ch1 | WSA Ch2 | WSA Ch1 |
\-------------------------------------------------/
Setting only the WSA2 upper bits is perfectly valid and
functional but the current Audioreach code builds the bitmask
from the channels count with:
active_channels_mask = (1 << num_channels) - 1;
In order to enable the WSA2 bits the channel count should be 4,
but the lower WSA bits are then also enabled and the DSP errors
out when trying to play on the disabled WSA interface.
A solution would've been to add a fake WSA2 topology element which
would be translated into the top bits only, but it's not clean and
add some special exceptions in the generic Audioreach code.
The solution suggested by Srinivas is to use the channel mapping to
set this bitmask.
This works but makes all the other calls using the channel mapping fail
because the DSP requires the channel_mapping table to start from index 0
and using num_channel length in order to apply the mapping on the
active_channels_mask bits in order.
So we need to skip the empty channel mapping entries in all other
users of the channel_map to build valid channel_mapping tables.
This should not break any other usecases since the default channel
mapping always start from index 0, and will add flexibilty to allow
some special non linear mapping for other interfaces as well.
Suggested-by: Srinivas Kandagatla <srinivas.kandagatla@oss.qualcomm.com>
Tested-by: Srinivas Kandagatla <srinivas.kandagatla@oss.qualcomm.com>
Reviewed-by: Srinivas Kandagatla <srinivas.kandagatla@oss.qualcomm.com>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patch.msgid.link/20260728-topic-sm8650-ayaneo-pocket-s2-wsa2-fix-v3-1-b29f44720178@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Decode and print out the content of currently supported RESOURCE_EVENT
notifications from firmware along with the needed data structures and
definitions.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Liam Girdwood <liam.r.girdwood@intel.com>
Link: https://patch.msgid.link/20260730082444.4828-1-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Mimic naming pattern commonly found in the ASoC code:
- 'rtd' in case of struct snd_soc_pcm_runtime
- 'runtime' in case of struct snd_pcm_runtime
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://patch.msgid.link/20260729110057.342447-8-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
To make the firmware loading proceduce easier to understand, especially
around restoring DRAM context, rename the following:
catpt_load_images -> catpt_request_dma_load_firmware
catpt_load_image -> catpt_request_load_firmware
catpt_restore_fwimage -> catpt_restore_dram_rodata
catpt_restore_memdumps -> catpt_restore_dram_data
catpt_store_memdumps -> catpt_store_dram_data
For the exact same reason, update a number of comments related to the
subject.
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://patch.msgid.link/20260729110057.342447-6-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Initial design assumed the mechanism could be reused for loading
external modules with signatures differing from the Intel's constant. No
users with such characteristics ever appeared rendering the 'signature'
argument useless.
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://patch.msgid.link/20260729110057.342447-4-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
