This set of tests require userspace memory to map objects, so
run them only if this that memory is available.
Signed-off-by: Krzysztof Karas <krzysztof.karas@intel.com>
Reviewed-by: Sebastian Brzezinka <sebastian.brzezinka@intel.com>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Reviewed-by: Janusz Krzysztofik <janusz.krzysztofik@linux.intel.com>
Reviewed-by: Michał Grzelak <michal.grzelak@intel.com>
Signed-off-by: Andi Shyti <andi.shyti@linux.intel.com>
Link: https://lore.kernel.org/r/20260508080214.1979686-3-krzysztof.karas@intel.com
Migration testing in i915 assumes current task's address space
to allocate new userspace mapping and uses it without
registering real user for that address space in mm_struct.
On single NUMA node setups PCI probe executes in the same
context as userspace process calling the test (i915_selftest
from IGT), but when multiple nodes are available, the PCI code
puts probe into a kernel workqueue. This switches execution to
a kworker, which does not have its own address space in
userspace and must borrow such memory from another process, so
"current->active_mm" is unknown at the start of the test.
It was observed that mm->mm_users would occasionally be 0
or drop to 0 during the test due to short delay between
scheduling and executing work in forked process, which reaped
userspace mappings, further leading to failures upon reading
from userland memory.
Prevent this by adding a PID parameter to a trusted task, so its
mm_struct may be used if needed.
Closes: https://gitlab.freedesktop.org/drm/i915/kernel/-/issues/14204
Signed-off-by: Krzysztof Karas <krzysztof.karas@intel.com>
Reviewed-by: Michał Grzelak <michal.grzelak@intel.com>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Reviewed-by: Sebastian Brzezinka <sebastian.brzezinka@intel.com>
Reviewed-by: Janusz Krzysztofik <janusz.krzysztofik@linux.intel.com>
Signed-off-by: Andi Shyti <andi.shyti@linux.intel.com>
Link: https://lore.kernel.org/r/20260508080214.1979686-2-krzysztof.karas@intel.com
TLDR: The bo->ttm object might be changed by calling ttm_bo_validate(),
move casting it to an i915_tt object later to actually get the right
pointer.
A user reported hitting the following bug under heavy use on DG2:
[26620.095550] Oops: general protection fault, probably for non-canonical address 0xa56b6b6b6b6b6b8b: 0000 1 SMP NOPTI
[26620.095556] CPU: 2 UID: 0 PID: 631 Comm: Xorg Not tainted 6.18.8 #1 PREEMPT(lazy)
[26620.095558] Hardware name: ASRock B850M Steel Legend WiFi/B850M Steel Legend WiFi, BIOS 3.50 09/18/2025
[26620.095559] RIP: 0010:i915_ttm_purge+0x84/0x100 [i915]
[26620.095604] Code: 00 00 00 48 8d 54 24 10 48 89 e6 48 89 fb e8 83 aa ae ff 85 c0 75 6f 48 83 bb a8 01 00 00 00 74 2c 48 8b 45 78 48 85 c0 74 23 <48> 8b 78 20 48 c7 c2 ff ff ff ff 31 f6 e8 7a 73 e3 e0 48 8b 7d 78
[26620.095605] RSP: 0018:ffffc90005fd7430 EFLAGS: 00010282
[26620.095607] RAX: a56b6b6b6b6b6b6b RBX: ffff8881f46c3dc0 RCX: 0000000000000000
[26620.095608] RDX: 0000000000000000 RSI: 0000000000000246 RDI: 00000000ffffffff
[26620.095609] RBP: ffff888289610f00 R08: 0000000000000001 R09: ffff88823b022000
[26620.095609] R10: ffff888103029b28 R11: ffff8881fc7f3800 R12: ffff88810b6150d0
[26620.095609] R13: ffff888289610f00 R14: 0000000000000000 R15: ffff8881f46c3dc0
[26620.095610] FS: 00007f1004d86900(0000) GS:ffff88901c858000(0000) knlGS:0000000000000000
[26620.095611] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[26620.095611] CR2: 00007f0fdf489000 CR3: 000000035b0c1000 CR4: 0000000000750ef0
[26620.095612] PKRU: 55555554
[26620.095612] Call Trace:
[26620.095615] <TASK>
[26620.095615] i915_ttm_move+0x2b9/0x420 [i915]
[26620.095642] ? ttm_tt_init+0x65/0x80 [ttm]
[26620.095644] ? i915_ttm_tt_create+0xc6/0x150 [i915]
[26620.095667] ttm_bo_handle_move_mem+0xb6/0x160 [ttm]
[26620.095669] ttm_bo_evict+0x100/0x150 [ttm]
[26620.095671] ? preempt_count_add+0x64/0xa0
[26620.095673] ? _raw_spin_lock+0xe/0x30
[26620.095675] ? _raw_spin_unlock+0xd/0x30
[26620.095675] ? i915_gem_object_evictable+0xb7/0xd0 [i915]
[26620.095704] ttm_bo_evict_cb+0x6e/0xd0 [ttm]
[26620.095705] ttm_lru_walk_for_evict+0xa6/0x200 [ttm]
[26620.095708] ttm_bo_alloc_resource+0x185/0x4f0 [ttm]
[26620.095709] ? init_object+0x62/0xd0
[26620.095712] ttm_bo_validate+0x7a/0x180 [ttm]
[26620.095713] ? _raw_spin_unlock_irqrestore+0x16/0x30
[26620.095714] __i915_ttm_get_pages+0xb0/0x170 [i915]
[26620.095737] i915_ttm_get_pages+0x9f/0x150 [i915]
[26620.095759] ? i915_gem_do_execbuffer+0xedc/0x2b40 [i915]
[26620.095786] ? alloc_debug_processing+0xd0/0x100
[26620.095787] ? _raw_spin_unlock_irqrestore+0x16/0x30
[26620.095788] ? i915_vma_instance+0xa0/0x4e0 [i915]
[26620.095822] __i915_gem_object_get_pages+0x2f/0x40 [i915]
[26620.095848] i915_vma_pin_ww+0x706/0x980 [i915]
[26620.095875] ? i915_gem_do_execbuffer+0xedc/0x2b40 [i915]
[26620.095904] eb_validate_vmas+0x170/0xa00 [i915]
[26620.095930] i915_gem_do_execbuffer+0x1201/0x2b40 [i915]
[26620.095953] ? alloc_debug_processing+0xd0/0x100
[26620.095954] ? _raw_spin_unlock_irqrestore+0x16/0x30
[26620.095955] ? i915_gem_execbuffer2_ioctl+0xc9/0x240 [i915]
[26620.095977] ? __wake_up_sync_key+0x32/0x50
[26620.095979] ? i915_gem_execbuffer2_ioctl+0xc9/0x240 [i915]
[26620.096001] ? __slab_alloc.isra.0+0x67/0xc0
[26620.096003] i915_gem_execbuffer2_ioctl+0x11a/0x240 [i915]
Results from decode_stacktrace.sh pointed to dereference of a file pointer
field of a i915 TTM page vector container associated with an object being
purged on eviction. That path is taken when the object is marked as no
longer needed.
Code analysis revealed a possibility of the i915 TTM page vector container
being replaced with a new instance inside a function that purges content
of the object, should it be still busy. That function is called,
indirectly via a more general function that changes the object's placement
and caching policy, before the problematic dereference, but still after
a pointer to the container is captured, rendering the pointer no longer
valid.
Fix the issue by capturing the pointer to the container only after its
potential replacement.
v2: Move the container_of() inside the if block (Sebastian),
- a simplified version of the commit description that explains briefly
why the change is necessary (Christian).
Closes: https://gitlab.freedesktop.org/drm/i915/kernel/-/work_items/14882
Fixes: 7ae034590c ("drm/i915/ttm: add tt shmem backend")
Signed-off-by: Janusz Krzysztofik <janusz.krzysztofik@linux.intel.com>
Cc: stable@vger.kernel.org # v5.17+
Cc: Matthew Auld <matthew.auld@intel.com>
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Cc: Sebastian Brzezinka <sebastian.brzezinka@intel.com>
Cc: Christian König <christian.koenig@amd.com>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Andi Shyti <andi.shyti@linux.intel.com>
Link: https://lore.kernel.org/r/20260508122612.469227-2-janusz.krzysztofik@linux.intel.com
Backmerging to pull in commit 5401b9adeb ("i915: don't use
a vma that didn't match the context VM") to revert it.
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
UAPI Changes:
- Support medium/low power modes in amdxdna.
- Support limiting frequency in ivpu.
- Document license for drm core uAPI headers.
- Add the following DRM formats: P230, Y7, XYYY2101010, T430,
XVUY210101010.
Cross-subsystem Changes:
- Add and improve dt-bindings.
- Remove unused dma-fence-array's signal_on_any support.
Core Changes:
- Do not call drop_master on file close if not master.
- Convert drm-bridge and drm/atomic to use drm_printf_indent.
- Remove the extra call to drm_connector_attach_encoder after
drm_bridge_connector_init().
- Assorted docbook updates.
Driver Changes:
- Bugfixes in amdxdna, ivpu, mipi-dsi, imagination, nouveau, panthor,
bridge/analogix_dp, ipv3, lontium-lt8912b, verisilicon, tve200,
etnaviv, panel/focaltech-ota7290b, panel/jadard-jd9365da-h3,
bridge/ite-it6263, renesas, xlnx, bridge/cdns-dsi, gma500,
bridge/microchip-lvds, mgag200.
- Add support for MStar TSUMU88ADT3-LF-1 bridge.
- Add support for WaveShare 7, Novatek NT35532, Startek KD070HDFLD092,
ChipWealth CH13726A AMOLED, Team Source Display TST070WSNE-196C,
Displaytech DT050BTFT-PTS panels.
- Improve mipi-dsi shutdown and convert a panasonic panel to use the
mipi-dsi wrappers.
- Allowing dumping vbios over debugfs in GSP-RM mode.
- Update maintainers for ivpu, add reviewer for drm-bridge code
and update maintainers for LT8912B DRM HDMI bridge.
- Add test pattern support to bridge/ti-sn65dsi83.
- Convert vmwgfx to vblank timers.
- Add power management to sysfb drm drivers to allow suspend/resume.
- Support the aforementioned new drm formats in xlnx/qynqmp.
- Fix panel Kconfig dependencies.
- Add carveout support for debugging and bringup to amxdna.
- Add support for long command tx via videobuffer in bridge/tc358768.
-----BEGIN PGP SIGNATURE-----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=kWIv
-----END PGP SIGNATURE-----
Merge tag 'drm-misc-next-2026-05-07' of https://gitlab.freedesktop.org/drm/misc/kernel into drm-next
drm-misc-next for v7.2-rc1:
UAPI Changes:
- Support medium/low power modes in amdxdna.
- Support limiting frequency in ivpu.
- Document license for drm core uAPI headers.
- Add the following DRM formats: P230, Y7, XYYY2101010, T430,
XVUY210101010.
Cross-subsystem Changes:
- Add and improve dt-bindings.
- Remove unused dma-fence-array's signal_on_any support.
Core Changes:
- Do not call drop_master on file close if not master.
- Convert drm-bridge and drm/atomic to use drm_printf_indent.
- Remove the extra call to drm_connector_attach_encoder after
drm_bridge_connector_init().
- Assorted docbook updates.
Driver Changes:
- Bugfixes in amdxdna, ivpu, mipi-dsi, imagination, nouveau, panthor,
bridge/analogix_dp, ipv3, lontium-lt8912b, verisilicon, tve200,
etnaviv, panel/focaltech-ota7290b, panel/jadard-jd9365da-h3,
bridge/ite-it6263, renesas, xlnx, bridge/cdns-dsi, gma500,
bridge/microchip-lvds, mgag200.
- Add support for MStar TSUMU88ADT3-LF-1 bridge.
- Add support for WaveShare 7, Novatek NT35532, Startek KD070HDFLD092,
ChipWealth CH13726A AMOLED, Team Source Display TST070WSNE-196C,
Displaytech DT050BTFT-PTS panels.
- Improve mipi-dsi shutdown and convert a panasonic panel to use the
mipi-dsi wrappers.
- Allowing dumping vbios over debugfs in GSP-RM mode.
- Update maintainers for ivpu, add reviewer for drm-bridge code
and update maintainers for LT8912B DRM HDMI bridge.
- Add test pattern support to bridge/ti-sn65dsi83.
- Convert vmwgfx to vblank timers.
- Add power management to sysfb drm drivers to allow suspend/resume.
- Support the aforementioned new drm formats in xlnx/qynqmp.
- Fix panel Kconfig dependencies.
- Add carveout support for debugging and bringup to amxdna.
- Add support for long command tx via videobuffer in bridge/tc358768.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patch.msgid.link/f73f342d-6efb-416d-81b0-1716bdd98d5f@linux.intel.com
After a GPU reset the HWSP is zeroed, so previously completed
requests appear incomplete. If such a request is picked up during
reset_rewind() and marked guilty, i915_request_set_error_once()
returns early (fence already signaled), leaving fence.error without
a fatal error code. The subsequent __i915_request_skip() then hits:
```
GEM_BUG_ON(!fatal_error(rq->fence.error))
```
Fixes a kernel BUG observed on Sandy Bridge (Gen6) during
heartbeat-triggered engine resets.
```
kernel BUG at drivers/gpu/drm/i915/i915_request.c:556!
RIP: __i915_request_skip+0x15e/0x1d0 [i915]
...
__i915_request_reset+0x212/0xa70 [i915]
reset_rewind+0xe4/0x280 [i915]
intel_gt_reset+0x30d/0x5b0 [i915]
heartbeat+0x516/0x530 [i915]
```
Guard __i915_request_skip() with i915_request_signaled(), if the
fence is already signaled, the ring content is committed and there
is nothing left to skip.
Fixes: 36e191f064 ("drm/i915: Apply i915_request_skip() on submission")
Closes: https://gitlab.freedesktop.org/drm/i915/kernel/-/work_items/13729
Signed-off-by: Sebastian Brzezinka <sebastian.brzezinka@intel.com>
Cc: stable@vger.kernel.org # v5.7+
Reviewed-by: Krzysztof Karas <krzysztof.karas@intel.com>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Signed-off-by: Andi Shyti <andi.shyti@linux.intel.com>
Link: https://lore.kernel.org/r/fe76921d35b6ae85aa651822726d0d9815aa5362.1776339012.git.sebastian.brzezinka@intel.com
TC358768 has two ways to send DSI commands: 1) buffer the payload data
into registers (DSICMD_WDx), which supports up to 8 bytes of payload, 2)
buffer the payload data into the video buffer, which supports up to 1024
bytes of payload.
The driver currently supports method 1).
Add support for transmitting long DSI commands (more than 8 bytes, up to
1024 bytes) using the video buffer. This mode can only be used before
the actual video transmission is enabled, i.e. the initial configuration.
Original version from Parth Pancholi <parth.pancholi@toradex.com>
Tested-by: João Paulo Gonçalves <joao.goncalves@toradex.com> # Toradex Verdin AM62
Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Link: https://patch.msgid.link/20260311-tc358768-v2-7-e75a99131bd5@ideasonboard.com
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Sending long commands using the video buffer (to be implemented in
following patches) requires setting TC358768_DATAFMT and
TC358768_DSITX_DT registers for command transfer. The same registers
also need to be configured properly for video transfer.
The long commands will be sent between the bridge's pre_enable() and
enable(), and currently we configure the registers for video transfer in
pre_enable(). Thus, they would be overwritten by the long command
transfer code.
To prevent that from happening, set those registers for video transfer
in enable(), not in pre_enable().
Based on code from Parth Pancholi <parth.pancholi@toradex.com>
Tested-by: João Paulo Gonçalves <joao.goncalves@toradex.com> # Toradex Verdin AM62
Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Link: https://patch.msgid.link/20260311-tc358768-v2-6-e75a99131bd5@ideasonboard.com
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Currently the driver ignores MIPI_DSI_MODE_LPM and always uses HS mode.
Add code to enable HS mode in pre_enable() only if MIPI_DSI_MODE_LPM is
not set, and always enable HS mode in enable() for video transmission.
Tested-by: João Paulo Gonçalves <joao.goncalves@toradex.com> # Toradex Verdin AM62
Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Link: https://patch.msgid.link/20260311-tc358768-v2-5-e75a99131bd5@ideasonboard.com
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
The driver prints a warning if MIPI_DSI_CLOCK_NON_CONTINUOUS is set, and
falls back to continuous clock mode. This was added in commit
fbc5a90e82 ("drm/bridge: tc358768: Disable non-continuous clock mode").
However, there have been multiple changes to the driver since then, and
at least in my setup, non-continuous clock mode works: I can see an
image on the panel, and I can see the clock lanes being non-continuous
with an oscilloscope.
So, let's enable MIPI_DSI_CLOCK_NON_CONTINUOUS support.
Cc: Dmitry Osipenko <digetx@gmail.com>
Tested-by: João Paulo Gonçalves <joao.goncalves@toradex.com> # Toradex Verdin AM62
Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Acked-by: Dmitry Osipenko <digetx@gmail.com>
Link: https://patch.msgid.link/20260311-tc358768-v2-4-e75a99131bd5@ideasonboard.com
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Some registers can only be written indirectly, using DSI_CONFW register.
We don't have many uses for those registers (in fact, only DSI_CONTROL
is currently written), but the code to do those writes inline is a bit
confusing.
Add a new function, tc358768_confw_update_bits() which can be used to
write the bits indirectly. Only DSI_CONTROL is currently supported.
Tested-by: João Paulo Gonçalves <joao.goncalves@toradex.com> # Toradex Verdin AM62
Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Link: https://patch.msgid.link/20260311-tc358768-v2-3-e75a99131bd5@ideasonboard.com
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Enable the pre_enable_prev_first flag on the tc358768 bridge to reverse
the pre-enable order, calling bridge pre_enable before panel prepare.
This ensures the bridge is ready before sending panel init commands in
the case of panels sending init commands in panel prepare function.
Signed-off-by: Parth Pancholi <parth.pancholi@toradex.com>
Tested-by: João Paulo Gonçalves <joao.goncalves@toradex.com> # Toradex Verdin AM62
Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Link: https://patch.msgid.link/20260311-tc358768-v2-2-e75a99131bd5@ideasonboard.com
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
It's "DSI_MODE", not "DIS_MODE".
Tested-by: João Paulo Gonçalves <joao.goncalves@toradex.com> # Toradex Verdin AM62
Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Link: https://patch.msgid.link/20260311-tc358768-v2-1-e75a99131bd5@ideasonboard.com
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
The <drm/drm_pciids.h> header only defines radeon_PCI_IDS which isn't
used in the mgag200 driver. So drop the useless include statement.
Signed-off-by: Uwe Kleine-König (The Capable Hub) <u.kleine-koenig@baylibre.com>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patch.msgid.link/b81a4830b3c287e9360197693a823a0dc72c674c.1777545446.git.u.kleine-koenig@baylibre.com
sparse reports:
drivers/gpu/drm/panthor/panthor_drv.c:1805:6: warning: symbol 'panthor_transparent_hugepage' was not declared. Should it be static?
Make it clean.
Signed-off-by: gyeyoung <gye976@gmail.com>
Reviewed-by: Steven Price <steven.price@arm.com>
Signed-off-by: Steven Price <steven.price@arm.com>
Link: https://patch.msgid.link/20260503144234.2150138-1-gye976@gmail.com
The kernel-doc block above struct drm_gpusvm_pages duplicates the
descriptions of the bit-flags that live in struct drm_gpusvm_pages_flags
using dotted notation (@flags.migrate_devmem, @flags.unmapped, ...).
That dotted notation is intended for nested anonymous structs/unions that
the parser flattens into the parent's parameter list. Here, however,
flags is of a named external type, so the parser does not flatten its
members and the dotted entries do not match any member of
drm_gpusvm_pages. They also duplicate the canonical descriptions already
present in the kernel-doc of struct drm_gpusvm_pages_flags itself.
Drop the five @flags.* lines and replace them with a single @flags entry
that cross-references the type via kernel-doc's "&struct ..." syntax.
This eliminates the redundancy and removes warnings emitted by the new
parameterdescs check in scripts/kernel-doc:
Excess struct member 'flags.migrate_devmem' description in
'drm_gpusvm_pages'
Excess struct member 'flags.unmapped' description in 'drm_gpusvm_pages'
Excess struct member 'flags.partial_unmap' description in
'drm_gpusvm_pages'
Excess struct member 'flags.has_devmem_pages' description in
'drm_gpusvm_pages'
Excess struct member 'flags.has_dma_mapping' description in
'drm_gpusvm_pages'
No functional change.
Assisted-by: Claude:claude-opus-4.6
Cc: Matthew Auld <matthew.auld@intel.com>
Signed-off-by: Shuicheng Lin <shuicheng.lin@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Link: https://patch.msgid.link/20260501175956.4054088-1-shuicheng.lin@intel.com
The LVDS controller was hardcoded to JEIDA mapping, which leads to
distorted output on panels expecting VESA mapping.
Update the driver to dynamically select the appropriate mapping and
pixel size based on the panel's advertised media bus format. This
ensures compatibility with both JEIDA and VESA displays.
Signed-off-by: Sandeep Sheriker M <sandeep.sheriker@microchip.com>
Signed-off-by: Dharma Balasubiramani <dharma.b@microchip.com>
Reviewed-by: Maxime Ripard <mripard@kernel.org>
Link: https://patch.msgid.link/20250625-microchip-lvds-v6-3-7ce91f89d35a@microchip.com
Signed-off-by: Manikandan Muralidharan <manikandan.m@microchip.com>
Drop the unused drm_panel field from the mchp_lvds structure, and remove
the unnecessary port device node lookup, as devm_drm_of_get_bridge()
already performs the required checks internally.
Signed-off-by: Dharma Balasubiramani <dharma.b@microchip.com>
Reviewed-by: Maxime Ripard <mripard@kernel.org>
Link: https://patch.msgid.link/20250625-microchip-lvds-v6-1-7ce91f89d35a@microchip.com
Signed-off-by: Manikandan Muralidharan <manikandan.m@microchip.com>
This reverts commit e3953ff665.
Seems to have been accidentally pushed without mandatory review.
Signed-off-by: Maarten Lankhorst <dev@lankhorst.se>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de> #irc
Acked-by: Maxime Ripard <mripard@kernel.org> #irc
The deprecated UNIVERSAL_DEV_PM_OPS() macro uses the provided callbacks
for both runtime PM and system sleep. This causes the DSI clocks to be
disabled twice: once during runtime suspend and again during system
suspend, resulting in a WARN message from the clock framework when
attempting to disable already-disabled clocks.
[ 84.384540] clk:231:5 already disabled
[ 84.388314] WARNING: CPU: 2 PID: 531 at /drivers/clk/clk.c:1181 clk_core_disable+0xa4/0xac
...
[ 84.579183] Call trace:
[ 84.581624] clk_core_disable+0xa4/0xac
[ 84.585457] clk_disable+0x30/0x4c
[ 84.588857] cdns_dsi_suspend+0x20/0x58 [cdns_dsi]
[ 84.593651] pm_generic_suspend+0x2c/0x44
[ 84.597661] ti_sci_pd_suspend+0xbc/0x15c
[ 84.601670] dpm_run_callback+0x8c/0x14c
[ 84.605588] __device_suspend+0x1a0/0x56c
[ 84.609594] dpm_suspend+0x17c/0x21c
[ 84.613165] dpm_suspend_start+0xa0/0xa8
[ 84.617083] suspend_devices_and_enter+0x12c/0x634
[ 84.621872] pm_suspend+0x1fc/0x368
To address this issue, replace UNIVERSAL_DEV_PM_OPS() with
RUNTIME_PM_OPS(). Bridge and panel drivers should only deal with runtime
PM, as the DRM framework manages system-wide power transitions through
the bridge enable() and disable() hooks.
Link: https://lore.kernel.org/all/fbde0659-78f3-46e4-98cf-d832f765a18b@ideasonboard.com/
Cc: stable@vger.kernel.org # 6.1.x
Fixes: e19233955d ("drm/bridge: Add Cadence DSI driver")
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Signed-off-by: Vitor Soares <vitor.soares@toradex.com>
Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Link: https://patch.msgid.link/20260505134705.188661-2-ivitro@gmail.com
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
The zynqmp-dpsub driver does not have build time dependencies on the PHY
or DMA drivers. These are runtime hardware restrictions.
Make the two dependencies optional if COMPILE_TEST.
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Link: https://patch.msgid.link/20260505094716.1784225-1-wenst@chromium.org
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
In case of error, we should unwind correctly.
Switching to using dmam_ instead of dma_ and moving the code earlier
fixes the issue.
Fixes: 6f392f3716 ("drm: renesas: rz-du: Implement MIPI DSI host transfers")
Suggested-by: Pavel Machek <pavel@nabladev.com>
Signed-off-by: Chris Brandt <chris.brandt@renesas.com>
Reviewed-by: Biju Das <biju.das.jz@bp.renesas.com>
Link: https://patch.msgid.link/20260501132135.196701-1-chris.brandt@renesas.com
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
On the RZ/G3L SMARC EVK, suspend to RAM powers down the ITE IT6263 chip.
The display controller driver's system PM callbacks invoke
drm_mode_config_helper_{suspend,resume}, which in turn call the bridge's
atomic_{disable,enable} callbacks to handle suspend/resume for the bridge
without dedicated PM ops.
To support proper reinitialization after power loss, move reset_gpio into
the it6263 struct so it is accessible beyond probe time. Relocate
it6263_hw_reset(), it6263_lvds_set_i2c_addr(), it6263_lvds_config() and
it6263_hdmi_config() from probe to atomic_enable, ensuring the chip is
fully reset and reconfigured on every enable, including after a
suspend/resume cycle.
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Liu Ying <victor.liu@nxp.com>
Link: https://patch.msgid.link/20260501061200.20129-1-biju.das.jz@bp.renesas.com
Signed-off-by: Liu Ying <victor.liu@nxp.com>
UAPI Changes:
- Expose per-client BO memory usage via fdinfo in amdxdna. (Hou)
- Change the default priority of drm scheduler to fair. (Tvrtko)
Cross-subsystem Changes:
- Revert hugetlb support in udmabuf. (Gunthorpe)
- Fix error in udmabuf with CONFIG_DMA_API_DEBUG(/ _SG). (Gavrilov)
- Add Docbook for DRM_IOCTL_SYNCOBJ_EVENTFD, (Ser)
clarify drm_bridge_get/put. (Tvrtko)
- Change signature of drm_connector_attach_hdr_output_metadata_property. (Canal)
- Use IOVA allocations in gpusvm and pagemap APIs. (Brost)
- Fix tracepoints vs dma-fence lifetime. (Tvrtko)
- Convert st-dma*.c tests to use kunit. (Gunthorpe)
Core Changes:
- Deduplicate counter and timestamp retrieval in vblank code. (Ville)
- Parse AMD VSDB v3 in CTA extension blocks, and use it in amdgpu. (Chen)
- Prevent bridge and encoder chain changes at inopportune times. (Ceresoli)
- Map the run queue 1:1 to the drm scheduler. (Tvrtko)
Driver Changes:
- Assorted bugfixes and (documentation) updates to rockchip, bridge/synopsis,
panfrost, tidss, accel/qaic, tilcdc, vc4, ast, imagination, panthor,
renesas, accel/amdxdna, msxfb, bridge/imx8mp, nouveau.
bridge/analogix_dp, bridge/exynos_dp, omap.
- Add support for CSW PNB601LS1-2, LGD LP116WHA-SPB1, panels.
- Add support for a lot of waveshare panels (Baryshkov)
- Support for AIE4 devices in accel/wamdxdna. (Zhang)
- Enable support for GEM shrinking in panthor. (Goel/Brezillon)
- Runtime Power Management is added to v3d. (Canal)
- Allow panel probing and use the panel bridge helper in analogix_dp. (Ding)
- Support XRGB1555 and C8 in mgag and XRGB1555 in ast. (Zimmermann)
-----BEGIN PGP SIGNATURE-----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=T0tH
-----END PGP SIGNATURE-----
Merge tag 'drm-misc-next-2026-04-20' of https://gitlab.freedesktop.org/drm/misc/kernel into drm-next
drm-misc-next for v7.1-rc1:
UAPI Changes:
- Expose per-client BO memory usage via fdinfo in amdxdna. (Hou)
- Change the default priority of drm scheduler to fair. (Tvrtko)
Cross-subsystem Changes:
- Revert hugetlb support in udmabuf. (Gunthorpe)
- Fix error in udmabuf with CONFIG_DMA_API_DEBUG(/ _SG). (Gavrilov)
- Add Docbook for DRM_IOCTL_SYNCOBJ_EVENTFD, (Ser)
clarify drm_bridge_get/put. (Tvrtko)
- Change signature of drm_connector_attach_hdr_output_metadata_property. (Canal)
- Use IOVA allocations in gpusvm and pagemap APIs. (Brost)
- Fix tracepoints vs dma-fence lifetime. (Tvrtko)
- Convert st-dma*.c tests to use kunit. (Gunthorpe)
Core Changes:
- Deduplicate counter and timestamp retrieval in vblank code. (Ville)
- Parse AMD VSDB v3 in CTA extension blocks, and use it in amdgpu. (Chen)
- Prevent bridge and encoder chain changes at inopportune times. (Ceresoli)
- Map the run queue 1:1 to the drm scheduler. (Tvrtko)
Driver Changes:
- Assorted bugfixes and (documentation) updates to rockchip, bridge/synopsis,
panfrost, tidss, accel/qaic, tilcdc, vc4, ast, imagination, panthor,
renesas, accel/amdxdna, msxfb, bridge/imx8mp, nouveau.
bridge/analogix_dp, bridge/exynos_dp, omap.
- Add support for CSW PNB601LS1-2, LGD LP116WHA-SPB1, panels.
- Add support for a lot of waveshare panels (Baryshkov)
- Support for AIE4 devices in accel/wamdxdna. (Zhang)
- Enable support for GEM shrinking in panthor. (Goel/Brezillon)
- Runtime Power Management is added to v3d. (Canal)
- Allow panel probing and use the panel bridge helper in analogix_dp. (Ding)
- Support XRGB1555 and C8 in mgag and XRGB1555 in ast. (Zimmermann)
From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patch.msgid.link/bf31b1a1-951b-4f60-b226-22e8c083697d@linux.intel.com
Signed-off-by: Dave Airlie <airlied@redhat.com>
Add support for allocating buffers from reserved carveout memory when
IOMMU is not available. This is useful during debugging or bring-up.
In this configuration, the device uses physical addresses and does
not support scatter-gather lists, requiring physically contiguous
buffers.
Implement carveout-backed allocation and integrate it into buffer
management to support operation in physical address mode.
Signed-off-by: Max Zhen <max.zhen@amd.com>
Reviewed-by: Mario Limonciello (AMD) <superm1@kernel.org>
Signed-off-by: Lizhi Hou <lizhi.hou@amd.com>
Link: https://patch.msgid.link/20260427170949.2666601-1-lizhi.hou@amd.com
Update the maintainer from Adrien to Francesco. Adrien is not
interested in maintaining this driver anymore, Francesco has access to
various hardware devices using this component and the vendor
documentation.
Cc: Adrien Grassein <adrien.grassein@gmail.com>
Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Acked-by: Adrien Grassein <adrien.grassein@gmail.com>
Acked-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patch.msgid.link/20260430085344.34271-1-francesco@dolcini.it
I am actively working on drm_bridge.c and recently also
drm_bridge_connector.c, especially for the DRM bridge hotplug work. Being
in Cc would ensure I won't miss related patches and can review them
promptly.
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Acked-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patch.msgid.link/20260430-maintainers-add-r-drm_bridge-v1-1-3e2523faf349@bootlin.com
As per the config name this Display IC features a DSI command-mode
interface (or the command to switch to video mode is not
known/documented) and does not use any of the video-mode helper
utilities, hence should not select VIDEOMODE_HELPERS. In addition it
uses devm_gpiod_get() and related functions from GPIOLIB.
Fixes: 779679d3c1 ("drm/panel: Add support for S6E3HA8 panel driver")
Signed-off-by: David Heidelberg <david@ixit.cz>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patch.msgid.link/20260505-panel-clean-up-kconfig-dep-v2-3-9cc31d6e6919@ixit.cz
As per the config name this Display IC features a DSI command-mode
interface (or the command to switch to video mode is not
known/documented) and does not use any of the video-mode helper
utilities, hence should not select VIDEOMODE_HELPERS. In addition it
uses devm_gpiod_get() and related functions from GPIOLIB.
Fixes: 88148c30ef ("drm/panel: Add Samsung S6E3FC2X01 DDIC with AMS641RW panel")
Signed-off-by: David Heidelberg <david@ixit.cz>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patch.msgid.link/20260505-panel-clean-up-kconfig-dep-v2-2-9cc31d6e6919@ixit.cz
As per the config name this Display IC features a DSI command-mode
interface (or the command to switch to video mode is not
known/documented) and does not use any of the video-mode helper
utilities, hence should not select VIDEOMODE_HELPERS. In addition it
uses devm_gpiod_get() and related functions from GPIOLIB.
Fixes: 5933baa36e ("drm/panel/samsung-sofef00: Add panel for OnePlus 6/T devices")
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Casey Connolly <casey.connolly@linaro.org>
Reviewed-by: David Heidelberg <david@ixit.cz>
Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patch.msgid.link/20260505-panel-clean-up-kconfig-dep-v2-1-9cc31d6e6919@ixit.cz
As preparation for independent fences remove the extra slab, kmalloc
should do just fine.
v2: use GFP_KERNEL instead of GFP_ATOMIC
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Prike Liang <Prike.Liang@amd.com>
Reviewed-by: Sunil Khatri <sunil.khatri@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Use drm_exec to take both locks i.e vm root bo and
wptr_obj bo to access the mapping data properly.
This fixes the security issue of unmap the wptr_obj while
a queue creation is in progress and passing other
bo at same address.
Signed-off-by: Sunil Khatri <sunil.khatri@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This version brings along following update:
-add max bandwidth budget to QoS interface
-Update tmz field for LSDMA
-fix buffer overruns warnings
-add memory bandwidth override debug interface
-Find link encoder for flexible DIG mapping cases
-Fix type mismatches using guards and explicit casts
-Fix type mismatches in DC and DMUB modules
-Skip HDR metadata update when Smart Power OLED enabled
-Rename backlight_properties to pwr_backlight_properties
-remove watermark range notify
-Clean Up Legacy DML Content
-Implement block sequencing infrastructure for modular hardware operations.
-Do DML float narrowing explicit
-Fix type mismatches in DML and normalize loop bounds
-Remove unused state param from enable_link_analog
-Fix Color Manager (3DLUT, Shaper, Blend)
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Taimur Hassan <Syed.Hassan@amd.com>
Signed-off-by: James Lin <pinglei.lin@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
The QoS reporting interface lacked a field to expose the maximum
active memory bandwidth budget. Adding this field allows callers to
observe the effective bandwidth ceiling.
[How]
Rename struct memory_qos to dc_measured_memory_qos and introduce
a new struct dc_requested_memory_qos holding bandwidth lower bound,
calculated average bandwidth, latency upper bounds, and max bandwidth
budget. Add a get_requested_memory_qos function pointer to
clk_mgr_funcs. Update dc_get_qos_info to call through the new
function pointer and populate all requested QoS fields including
qos_max_bw_budget_in_mbps in dc_qos_info.
Reviewed-by: Dillon Varone <dillon.varone@amd.com>
Signed-off-by: Wenjing Liu <wenjing.liu@amd.com>
Signed-off-by: James Lin <pinglei.lin@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why & How]
TMZ field should be 4-bits wide instead of 1.
Also add missing src/dst_cache_policy fields to
tiled copy struct.
Reviewed-by: Rafal Ostrowski <rafal.ostrowski@amd.com>
Signed-off-by: Alvin Lee <Alvin.Lee2@amd.com>
Signed-off-by: James Lin <pinglei.lin@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why & How]
Fixes a warning by adding bounds checks and index validation in dml2_0
sources to address static analysis warnings. Ensures safe array access and
prevents out-of-bounds reads by validating indices before use, improving
robustness and reliability in the affected files.
Reviewed-by: Austin Zheng <austin.zheng@amd.com>
Signed-off-by: Gaghik Khachatrian <gaghik.khachatrian@amd.com>
Signed-off-by: James Lin <pinglei.lin@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why & How]
Add override_memory_bandwidth_request to clk_mgr_funcs and get_utm_qos_model callback
to soc_and_ip_translator_funcs for future test use.
Reviewed-by: Dillon Varone <dillon.varone@amd.com>
Signed-off-by: Wenjing Liu <wenjing.liu@amd.com>
Signed-off-by: James Lin <pinglei.lin@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why & how]
link->link_enc can only be used to identify the link's link encoder
when the link is not permitted to use flexible link encoder
assignments.
Use the correct function for identifying link encoder and add
function pointer guards before calling them.
Reviewed-by: Wenjing Liu <wenjing.liu@amd.com>
Signed-off-by: Ovidiu Bunea <ovidiu.bunea@amd.com>
Signed-off-by: James Lin <pinglei.lin@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Address signed/unsigned comparison warnings across dc paths to keep
builds warning-clean and improve type safety at comparison boundaries.
Most warnings came from signed loop/index temporaries compared against
unsigned counters and table sizes, plus a smaller number of mixed
signed/unsigned clock, bandwidth, and geometry comparisons.
[How]
Aligned iterator and temporary variable types with the semantic type
of the compared bounds. Used unsigned indices for loops bounded by unsigned
counters and table sizes, while retaining signed types where values are
semantically signed or participate in arithmetic that may legitimately go
negative. Where mixed signed/unsigned comparisons are intentional, applied
explicit boundary casts or guarded comparisons instead of broad type
changes.
No functional behavior changes are intended; this is a warning-resolution
and type-alignment cleanup.
Reviewed-by: Dillon Varone <dillon.varone@amd.com>
Signed-off-by: Gaghik Khachatrian <gaghik.khachatrian@amd.com>
Signed-off-by: James Lin <pinglei.lin@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Address signed/unsigned comparison warnings across dc paths to keep
builds warning-clean and improve type safety at comparison boundaries.
Most warnings came from signed loop/index temporaries compared against
unsigned counters and table sizes, plus a smaller number of mixed
signed/unsigned clock, bandwidth, and geometry comparisons.
[How]
Aligned loop/index and bound types in the affected modules and DMUB
sources, including color, freesync, power, stats, and vmid paths.
Used unsigned iterators where bounds/counters are unsigned, preserved
signed types where negative values are meaningful, and updated related
format specifiers where type changes required it. Changes are limited to
warning resolution and type alignment.
No functional behavior change is intended.
Reviewed-by: Dillon Varone <dillon.varone@amd.com>
Signed-off-by: Gaghik Khachatrian <gaghik.khachatrian@amd.com>
Signed-off-by: James Lin <pinglei.lin@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why & How]
While smart power oled is enabled,
the infopacket contents are tied to the frame histogram,
so it does not need driver side to update the hdr metadata.
Reviewed-by: Aric Cyr <aric.cyr@amd.com>
Reviewed-by: Anthony Koo <anthony.koo@amd.com>
Signed-off-by: Ian Chen <ian.chen@amd.com>
Signed-off-by: James Lin <pinglei.lin@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
'struct backlight_properties' in power.c has the same name as the kernel's
struct defined in <linux/backlight.h>. In out-of-tree backport build
environments, the header is forcefully injected via command-line includes,
causing a redefinition error.
[How]
Rename the file-local 'struct backlight_properties' to
'pwr_backlight_properties' to avoid the name collision. No functional
change.
Reviewed-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Ray Wu <ray.wu@amd.com>
Signed-off-by: James Lin <pinglei.lin@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why & How]
dcn42 only use one set of watermark A,
driver always update set A runtime.
no need to notify pmfw the clock range.
Reviewed-by: Dmytro Laktyushkin <dmytro.laktyushkin@amd.com>
Signed-off-by: Charlene Liu <Charlene.Liu@amd.com>
Signed-off-by: James Lin <pinglei.lin@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
