Replace memset(0) followed by strscpy() with strscpy_pad() to improve
netdev_boot_setup_add(). This avoids zeroing the memory before copying
the string and ensures the destination buffer is only written to once,
simplifying the code and improving efficiency.
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Link: https://patch.msgid.link/20250814180514.251000-2-thorsten.blum@linux.dev
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Tariq Toukan says:
====================
net/mlx5: Support disabling host PFs
This small series by Daniel adds support for disabling host PFs.
If device is capable and configured, the driver won't access vports of
disabled host functions.
====================
Link: https://patch.msgid.link/1755112796-467444-1-git-send-email-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Some devices support disabling the physical function on the host. When
this is configured the vports for the host functions do not exist.
This patch checks if host functions are enabled before trying to access
their vports.
Signed-off-by: Daniel Jurgens <danielj@nvidia.com>
Reviewed-by: William Tu <witu@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/1755112796-467444-3-git-send-email-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The host PF can be disabled, query firmware to check if the host PF of
this function exists.
Signed-off-by: Daniel Jurgens <danielj@nvidia.com>
Reviewed-by: William Tu <witu@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/1755112796-467444-2-git-send-email-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
A struct mii_bus doesn't need a parent, so we can simplify the code and
remove using a faux device. Only difference is the following in sysfs
under /sys/class/mdio_bus:
old: fixed-0 -> '../../devices/faux/Fixed MDIO bus/mdio_bus/fixed-0'
new: fixed-0 -> ../../devices/virtual/mdio_bus/fixed-0
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Link: https://patch.msgid.link/e9426bb9-f228-4b99-bc09-a80a958b5a93@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Since commit 67b746f94f ("net: bridge: mcast: make sure querier
port/address updates are consistent"), the argument 'querier' is unused,
just get rid of it.
Signed-off-by: Wang Liang <wangliang74@huawei.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Acked-by: Nikolay Aleksandrov <razor@blackwall.org>
Link: https://patch.msgid.link/20250814042355.1720755-1-wangliang74@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add check for gphy in enable/disable phy calls and set power bits
in gphy control register.
Signed-off-by: Kyle Hendry <kylehendrydev@gmail.com>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Link: https://patch.msgid.link/20250814002530.5866-3-kylehendrydev@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add gphy mask to bcm63xx phy info struct and add data for bcm63268
Signed-off-by: Kyle Hendry <kylehendrydev@gmail.com>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Link: https://patch.msgid.link/20250814002530.5866-2-kylehendrydev@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The clamp() macro explicitly expresses the intent of constraining
a value within bounds.Therefore, replacing min(max(a, b), c) with
clamp(val, lo, hi) can improve code readability.
Signed-off-by: Xichao Zhao <zhao.xichao@vivo.com>
Reviewed-by: Joe Damato <joe@dama.to>
Reviewed-by: Edward Cree <ecree.xilinx@gmail.com>
Link: https://patch.msgid.link/20250812065026.620115-1-zhao.xichao@vivo.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Ido Schimmel says:
====================
bridge: Redirect to backup port when port is administratively down
Patch #1 amends the bridge to redirect to the backup port when the
primary port is administratively down and not only when it does not have
a carrier. See the commit message for more details.
Patch #2 extends the bridge backup port selftest to cover this case.
====================
Link: https://patch.msgid.link/20250812080213.325298-1-idosch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Test that packets are redirected to the backup port when the primary
port is administratively down.
With the previous patch:
# ./test_bridge_backup_port.sh
[...]
TEST: swp1 administratively down [ OK ]
TEST: No forwarding out of swp1 [ OK ]
TEST: Forwarding out of vx0 [ OK ]
TEST: swp1 administratively up [ OK ]
TEST: Forwarding out of swp1 [ OK ]
TEST: No forwarding out of vx0 [ OK ]
[...]
Tests passed: 89
Tests failed: 0
Without the previous patch:
# ./test_bridge_backup_port.sh
[...]
TEST: swp1 administratively down [ OK ]
TEST: No forwarding out of swp1 [ OK ]
TEST: Forwarding out of vx0 [FAIL]
TEST: swp1 administratively up [ OK ]
TEST: Forwarding out of swp1 [ OK ]
[...]
Tests passed: 85
Tests failed: 4
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Acked-by: Nikolay Aleksandrov <razor@blackwall.org>
Link: https://patch.msgid.link/20250812080213.325298-3-idosch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
If a backup port is configured for a bridge port, the bridge will
redirect known unicast traffic towards the backup port when the primary
port is administratively up but without a carrier. This is useful, for
example, in MLAG configurations where a system is connected to two
switches and there is a peer link between both switches. The peer link
serves as the backup port in case one of the switches loses its
connection to the multi-homed system.
In order to avoid flooding when the primary port loses its carrier, the
bridge does not flush dynamic FDB entries pointing to the port upon STP
disablement, if the port has a backup port.
The above means that known unicast traffic destined to the primary port
will be blackholed when the port is put administratively down, until the
FDB entries pointing to it are aged-out.
Given that the current behavior is quite weird and unlikely to be
depended on by anyone, amend the bridge to redirect to the backup port
also when the primary port is administratively down and not only when it
does not have a carrier.
The change is motivated by a report from a user who expected traffic to
be redirected to the backup port when the primary port was put
administratively down while debugging a network issue.
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Acked-by: Nikolay Aleksandrov <razor@blackwall.org>
Link: https://patch.msgid.link/20250812080213.325298-2-idosch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
On fast machines the tests run in quick succession so even
when tests clean up after themselves the carrier may need
some time to come back.
Specifically in NIPA when ping.py runs right after netpoll_basic.py
the first ping command fails.
Since the context manager callbacks are now common NetDrvEpEnv
gets an ip link up call as well.
Reviewed-by: Joe Damato <joe@dama.to>
Link: https://patch.msgid.link/20250812142054.750282-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The following Vitesse/Microsemi/Microchip PHYs, among those supported by
this driver, have the host interface configurable as SGMII or QSGMII:
- VSC8504
- VSC8514
- VSC8552
- VSC8562
- VSC8572
- VSC8574
- VSC8575
- VSC8582
- VSC8584
All these PHYs are documented to have bit 7 of "MAC SerDes PCS Control"
as "MAC SerDes ANEG enable".
Out of these, I could test the VSC8514 quad PHY in QSGMII. This works
both with the in-band autoneg on and off, on the NXP LS1028A-RDB and
T1040-RDB boards.
Notably, the bit is sticky (survives soft resets), so giving Linux the
tools to read and modify this settings makes it robust to changes made
to it by previous boot layers (U-Boot).
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/20250813074454.63224-1-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
These are present since commit d8652956cf ("net: dsa: realtek-smi: Add
Realtek SMI driver") and never needed. Apparently the driver was not
cleaned up sufficiently for submission.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://patch.msgid.link/20250813181023.808528-1-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Parav Pandit says:
====================
devlink port attr cleanup
patch-1 removes the return 0 check at several places and simplfies
patch-2 constifies the attributes and moves the checks early
caller
====================
Link: https://patch.msgid.link/20250813094417.7269-1-parav@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Constify the devlink port attributes to indicate they are read only
and does not depend on anything else. Therefore, validate it early
before setting in the devlink port.
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Parav Pandit <parav@nvidia.com>
Link: https://patch.msgid.link/20250813094417.7269-3-parav@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Drop always returning 0 from the helper routine and simplify
its callers.
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Parav Pandit <parav@nvidia.com>
Link: https://patch.msgid.link/20250813094417.7269-2-parav@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The "rc" variable is set like this:
if (IS_ERR(resp)) {
rc = PTR_ERR(resp);
We know that "rc" is negative so there is no need to check.
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://patch.msgid.link/aJwn2ox5g9WsD2Vx@stanley.mountain
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Short: Convert the RTL8226-CG to c45 so it can be used in its
Realtek based ecosystems.
Long: The RTL8226-CG can be mainly found on devices of the
Realtek Otto switch platform. Devices like the Zyxel XGS1210-12
are based on it. These implement a hardware based phy polling
in the background to update SoC status registers.
The hardware provides 4 smi busses where phys are attached to.
For each bus one can decide if it is polled in c45 or c22 mode.
See https://svanheule.net/realtek/longan/register/smi_glb_ctrl
With this setting the register access will be limited by the
hardware. This is very complex (including caching and special
c45-over-c22 handling). But basically it boils down to "enable
protocol x and SoC will disable register access via protocol y".
Mainline already gained support for the rtl9300 mdio driver
in commit 24e31e4747 ("net: mdio: Add RTL9300 MDIO driver").
It covers the basic features, but a lot effort is still needed
to understand hardware properly. So it runs a simple setup by
selecting the proper bus mode during startup.
/* Put the interfaces into C45 mode if required */
glb_ctrl_mask = GENMASK(19, 16);
for (i = 0; i < MAX_SMI_BUSSES; i++)
if (priv->smi_bus_is_c45[i])
glb_ctrl_val |= GLB_CTRL_INTF_SEL(i);
...
err = regmap_update_bits(regmap, SMI_GLB_CTRL,
glb_ctrl_mask, glb_ctrl_val);
To avoid complex coding later on, it limits access by only
providing either c22 or c45:
bus->name = "Realtek Switch MDIO Bus";
if (priv->smi_bus_is_c45[mdio_bus]) {
bus->read_c45 = rtl9300_mdio_read_c45;
bus->write_c45 = rtl9300_mdio_write_c45;
} else {
bus->read = rtl9300_mdio_read_c22;
bus->write = rtl9300_mdio_write_c22;
}
Because of these limitations the existing RTL8226 phy driver
is not working at all on Realtek switches. Convert the driver
to c45-only.
Luckily the RTL8226 seems to support proper MDIO_PMA_EXTABLE
flags. So standard function genphy_c45_pma_read_abilities() can
call genphy_c45_pma_read_ext_abilities() and 10/100/1000 is
populated right. Thus conversion is straight forward.
Outputs before - REMARK: For this a "hacked" bus was used that
toggles the mode for each c22/c45 access. But that is slow and
produces unstable data in the SoC status registers).
Settings for lan9:
Supported ports: [ TP MII ]
Supported link modes: 10baseT/Half 10baseT/Full
100baseT/Half 100baseT/Full
1000baseT/Full
2500baseT/Full
Supported pause frame use: Symmetric Receive-only
Supports auto-negotiation: Yes
Supported FEC modes: Not reported
Advertised link modes: 10baseT/Half 10baseT/Full
100baseT/Half 100baseT/Full
1000baseT/Full
2500baseT/Full
Advertised pause frame use: Symmetric Receive-only
Advertised auto-negotiation: Yes
Advertised FEC modes: Not reported
Speed: Unknown!
Duplex: Unknown! (255)
Port: Twisted Pair
PHYAD: 24
Transceiver: external
Auto-negotiation: on
MDI-X: Unknown
Supports Wake-on: d
Wake-on: d
Link detected: no
Outputs with this commit:
Settings for lan9:
Supported ports: [ TP ]
Supported link modes: 10baseT/Half 10baseT/Full
100baseT/Half 100baseT/Full
1000baseT/Full
2500baseT/Full
Supported pause frame use: Symmetric Receive-only
Supports auto-negotiation: Yes
Supported FEC modes: Not reported
Advertised link modes: 10baseT/Half 10baseT/Full
100baseT/Half 100baseT/Full
1000baseT/Full
2500baseT/Full
Advertised pause frame use: Symmetric Receive-only
Advertised auto-negotiation: Yes
Advertised FEC modes: Not reported
Speed: Unknown!
Duplex: Unknown! (255)
Port: Twisted Pair
PHYAD: 24
Transceiver: external
Auto-negotiation: on
MDI-X: Unknown
Supports Wake-on: d
Wake-on: d
Link detected: no
Signed-off-by: Markus Stockhausen <markus.stockhausen@gmx.de>
Link: https://patch.msgid.link/20250813054407.1108285-1-markus.stockhausen@gmx.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add minimal LED controller driver supporting
the most common uses with the 'netdev' trigger.
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Tested-by: Heiko Stuebner <heiko@sntech.de>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20250813124542.3450447-1-shaojijie@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=vNLV
-----END PGP SIGNATURE-----
Merge tag 'docs/v6.17-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-docs
Mauro Carvalho Chehab says:
====================
add a generic yaml parser integrated with Netlink specs generation
- An YAML parser Sphinx plugin, integrated with Netlink YAML doc
parser.
The patch content is identical to my v10 submission:
https://lore.kernel.org/cover.1753718185.git.mchehab+huawei@kernel.org
* tag 'docs/v6.17-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-docs:
sphinx: parser_yaml.py: fix line numbers information
docs: parser_yaml.py: fix backward compatibility with old docutils
docs: parser_yaml.py: add support for line numbers from the parser
tools: netlink_yml_parser.py: add line numbers to parsed data
MAINTAINERS: add netlink_yml_parser.py to linux-doc
docs: netlink: remove obsolete .gitignore from unused directory
tools: ynl_gen_rst.py: drop support for generating index files
docs: uapi: netlink: update netlink specs link
docs: use parser_yaml extension to handle Netlink specs
docs: sphinx: add a parser for yaml files for Netlink specs
tools: ynl_gen_rst.py: cleanup coding style
docs: netlink: index.rst: add a netlink index file
tools: ynl_gen_rst.py: Split library from command line tool
docs: netlink: netlink-raw.rst: use :ref: instead of :doc:
====================
Link: https://patch.msgid.link/20250812113329.356c93c2@foz.lan
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Cross-merge networking fixes after downstream PR (net-6.17-rc2).
No conflicts.
Adjacent changes:
drivers/net/ethernet/stmicro/stmmac/dwmac-rk.c
d7a276a576 ("net: stmmac: rk: convert to suspend()/resume() methods")
de1e963ad0 ("net: stmmac: rk: put the PHY clock on remove")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Current release - regressions:
- netfilter: nft_set_pipapo:
- don't return bogus extension pointer
- fix null deref for empty set
Current release - new code bugs:
- core: prevent deadlocks when enabling NAPIs with mixed kthread config
- eth: netdevsim: Fix wild pointer access in nsim_queue_free().
Previous releases - regressions:
- page_pool: allow enabling recycling late, fix false positive warning
- sched: ets: use old 'nbands' while purging unused classes
- xfrm:
- restore GSO for SW crypto
- bring back device check in validate_xmit_xfrm
- tls: handle data disappearing from under the TLS ULP
- ptp: prevent possible ABBA deadlock in ptp_clock_freerun()
- eth: bnxt: fill data page pool with frags if PAGE_SIZE > BNXT_RX_PAGE_SIZE
- eth: hv_netvsc: fix panic during namespace deletion with VF
Previous releases - always broken:
- netfilter: fix refcount leak on table dump
- vsock: do not allow binding to VMADDR_PORT_ANY
- sctp: linearize cloned gso packets in sctp_rcv
- eth: hibmcge: fix the division by zero issue
- eth: microchip: fix KSZ8863 reset problem
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
-----BEGIN PGP SIGNATURE-----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=Ydk1
-----END PGP SIGNATURE-----
Merge tag 'net-6.17-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Paolo Abeni:
"Including fixes from Netfilter and IPsec.
Current release - regressions:
- netfilter: nft_set_pipapo:
- don't return bogus extension pointer
- fix null deref for empty set
Current release - new code bugs:
- core: prevent deadlocks when enabling NAPIs with mixed kthread
config
- eth: netdevsim: Fix wild pointer access in nsim_queue_free().
Previous releases - regressions:
- page_pool: allow enabling recycling late, fix false positive
warning
- sched: ets: use old 'nbands' while purging unused classes
- xfrm:
- restore GSO for SW crypto
- bring back device check in validate_xmit_xfrm
- tls: handle data disappearing from under the TLS ULP
- ptp: prevent possible ABBA deadlock in ptp_clock_freerun()
- eth:
- bnxt: fill data page pool with frags if PAGE_SIZE > BNXT_RX_PAGE_SIZE
- hv_netvsc: fix panic during namespace deletion with VF
Previous releases - always broken:
- netfilter: fix refcount leak on table dump
- vsock: do not allow binding to VMADDR_PORT_ANY
- sctp: linearize cloned gso packets in sctp_rcv
- eth:
- hibmcge: fix the division by zero issue
- microchip: fix KSZ8863 reset problem"
* tag 'net-6.17-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (54 commits)
net: usb: asix_devices: add phy_mask for ax88772 mdio bus
net: kcm: Fix race condition in kcm_unattach()
selftests: net/forwarding: test purge of active DWRR classes
net/sched: ets: use old 'nbands' while purging unused classes
bnxt: fill data page pool with frags if PAGE_SIZE > BNXT_RX_PAGE_SIZE
netdevsim: Fix wild pointer access in nsim_queue_free().
net: mctp: Fix bad kfree_skb in bind lookup test
netfilter: nf_tables: reject duplicate device on updates
ipvs: Fix estimator kthreads preferred affinity
netfilter: nft_set_pipapo: fix null deref for empty set
selftests: tls: test TCP stealing data from under the TLS socket
tls: handle data disappearing from under the TLS ULP
ptp: prevent possible ABBA deadlock in ptp_clock_freerun()
ixgbe: prevent from unwanted interface name changes
devlink: let driver opt out of automatic phys_port_name generation
net: prevent deadlocks when enabling NAPIs with mixed kthread config
net: update NAPI threaded config even for disabled NAPIs
selftests: drv-net: don't assume device has only 2 queues
docs: Fix name for net.ipv4.udp_child_hash_entries
riscv: dts: thead: Add APB clocks for TH1520 GMACs
...
Add a simple test for checking that RSS on flow label works,
and that its rejected for IPv4 flows.
# ./tools/testing/selftests/drivers/net/hw/rss_flow_label.py
TAP version 13
1..2
ok 1 rss_flow_label.test_rss_flow_label
ok 2 rss_flow_label.test_rss_flow_label_6only
# Totals: pass:2 fail:0 xfail:0 xpass:0 skip:0 error:0
Reviewed-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Joe Damato <joe@dama.to>
Link: https://patch.msgid.link/20250811234212.580748-5-kuba@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
It appears that the bnxt FW API has the relevant bit for Flow Label
hashing. Plumb in the support. Obey the capability bit.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Michael Chan <michael.chan@broadcom.com>
Link: https://patch.msgid.link/20250811234212.580748-4-kuba@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Support IPv6 Flow Label hashing. Use both inner and outer IPv6
header's Flow Label if both headers are detected. Flow Label
is unlike normal header fields, by enabling it user accepts
the unstable hash and possible reordering. Because of that
I think it's reasonable to hash over all Flow Labels we can
find, even tho we don't hash over all L3 addresses.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Link: https://patch.msgid.link/20250811234212.580748-3-kuba@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Some modern NICs support including the IPv6 Flow Label in
the flow hash for RSS queue selection. This is outside
the old "Microsoft spec", but was included in the OCP NIC spec:
[ ] RSS include flow label in the hash (configurable)
https://www.opencompute.org/w/index.php?title=Core_Offloads#Receive_Side_Scaling
RSS Flow Label hashing allows TCP Protective Load Balancing (PLB)
to recover from receiver congestion / overload.
Rx CPU/queue hotspots are relatively common for data ingest
workloads, and so far we had to try to detect the condition
at the RPC layer and reopen the connection. PLB lets us change
the Flow Label and therefore Rx CPU on RTO, with minimal packet
reordering. PLB reaction times are much faster, and can happen
at any point in the connection, not just at RPC boundaries.
Due to the nature of host processing (relatively long queues,
other kernel subsystems masking IRQs for 100s of msecs)
the risk of reordering within the host is higher than in
the network. But for applications which need it - it is far
preferable to potentially persistent overload of subset of
queues.
It is expected that the hash communicated to the host
may change if the Flow Label changes. This may be surprising
to some host software, but I don't expect the devices
can compute two Toeplitz hashes, one with the Flow Label
for queue selection and one without for the rx hash
communicated to the host. Besides, changing the hash
may potentially help to change the path thru host queues.
User can disable NETIF_F_RXHASH if they require a stable
flow hash.
The name RXH_IP6_FL was chosen based on what we call
Flow Label variables in IPv6 processing (fl). I prefer
fl_lbl but that appears to be an fbnic-only spelling.
We could spell out RXH_IP6_FLOW_LABEL but existing
RXH_ defines are a lot more terse.
Willem notes [1] that Flow Label is defined as identifying the flow
and therefore including both the flow label _and_ the L4 header
fields is not generally necessary. But it should not hurt so
it's not explicitly prevented if the driver supports hashing
on both at the same time.
Link: https://lore.kernel.org/68483433b45e2_3cd66f29440@willemb.c.googlers.com.notmuch [1]
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Joe Damato <joe@dama.to>
Link: https://patch.msgid.link/20250811234212.580748-2-kuba@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Without setting phy_mask for ax88772 mdio bus, current driver may create
at most 32 mdio phy devices with phy address range from 0x00 ~ 0x1f.
DLink DUB-E100 H/W Ver B1 is such a device. However, only one main phy
device will bind to net phy driver. This is creating issue during system
suspend/resume since phy_polling_mode() in phy_state_machine() will
directly deference member of phydev->drv for non-main phy devices. Then
NULL pointer dereference issue will occur. Due to only external phy or
internal phy is necessary, add phy_mask for ax88772 mdio bus to workarnoud
the issue.
Closes: https://lore.kernel.org/netdev/20250806082931.3289134-1-xu.yang_2@nxp.com
Fixes: e532a096be ("net: usb: asix: ax88772: add phylib support")
Cc: stable@vger.kernel.org
Signed-off-by: Xu Yang <xu.yang_2@nxp.com>
Tested-by: Oleksij Rempel <o.rempel@pengutronix.de>
Reviewed-by: Oleksij Rempel <o.rempel@pengutronix.de>
Link: https://patch.msgid.link/20250811092931.860333-1-xu.yang_2@nxp.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The round_rate() clk ops is deprecated, so migrate this driver from
round_rate() to determine_rate().
Signed-off-by: Brian Masney <bmasney@redhat.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/20250810-net-round-rate-v1-1-dbb237c9fe5c@redhat.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Thomas Weißschuh says:
====================
net: Don't use %pK through printk or tracepoints
In the past %pK was preferable to %p as it would not leak raw pointer
values into the kernel log.
Since commit ad67b74d24 ("printk: hash addresses printed with %p")
the regular %p has been improved to avoid this issue.
Furthermore, restricted pointers ("%pK") were never meant to be used
through printk(). They can still unintentionally leak raw pointers or
acquire sleeping locks in atomic contexts.
Switch to the regular pointer formatting which is safer and
easier to reason about.
There are still a few users of %pK left, but these use it through seq_file,
for which its usage is safe.
====================
Link: https://patch.msgid.link/20250811-restricted-pointers-net-v5-0-2e2fdc7d3f2c@linutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In the past %pK was preferable to %p as it would not leak raw pointer
values into the kernel log.
Since commit ad67b74d24 ("printk: hash addresses printed with %p")
the regular %p has been improved to avoid this issue.
Furthermore, restricted pointers ("%pK") were never meant to be used
through tracepoints. They can still unintentionally leak raw pointers or
acquire sleeping locks in atomic contexts.
Switch to the regular pointer formatting which is safer and
easier to reason about.
There are still a few users of %pK left, but these use it through seq_file,
for which its usage is safe.
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/20250811-restricted-pointers-net-v5-2-2e2fdc7d3f2c@linutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In the past %pK was preferable to %p as it would not leak raw pointer
values into the kernel log.
Since commit ad67b74d24 ("printk: hash addresses printed with %p")
the regular %p has been improved to avoid this issue.
Furthermore, restricted pointers ("%pK") were never meant to be used
through printk(). They can still unintentionally leak raw pointers or
acquire sleeping locks in atomic contexts.
Switch to the regular pointer formatting which is safer and
easier to reason about.
There are still a few users of %pK left, but these use it through seq_file,
for which its usage is safe.
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Acked-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/20250811-restricted-pointers-net-v5-1-2e2fdc7d3f2c@linutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Davide Caratti says:
====================
ets: use old 'nbands' while purging unused classes
- patch 1/2 fixes a NULL dereference in the control path of sch_ets qdisc
- patch 2/2 extends kselftests to verify effectiveness of the above fix
====================
Link: https://patch.msgid.link/cover.1755016081.git.dcaratti@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Tony Nguyen says:
====================
ixgbe: bypass devlink phys_port_name generation
Jedrzej adds option to skip phys_port_name generation and opts
ixgbe into it as some configurations rely on pre-devlink naming
which could end up broken as a result.
* '10GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue:
ixgbe: prevent from unwanted interface name changes
devlink: let driver opt out of automatic phys_port_name generation
====================
Link: https://patch.msgid.link/20250812205226.1984369-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Extend the existing netconsole cmdline selftest to also validate that
interface selection can be performed via MAC address.
The test now validates that netconsole works with both interface name
and MAC address, improving test coverage.
Suggested-by: Breno Leitao <leitao@debian.org>
Reviewed-by: Breno Leitao <leitao@debian.org>
Signed-off-by: Andre Carvalho <asantostc@gmail.com>
Link: https://patch.msgid.link/20250812-netcons-cmdline-selftest-v2-1-8099fb7afa9e@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The data page pool always fills the HW rx ring with pages. On arm64 with
64K pages, this will waste _at least_ 32K of memory per entry in the rx
ring.
Fix by fragmenting the pages if PAGE_SIZE > BNXT_RX_PAGE_SIZE. This
makes the data page pool the same as the header pool.
Tested with iperf3 with a small (64 entries) rx ring to encourage buffer
circulation.
Fixes: cd1fafe7da ("eth: bnxt: add support rx side device memory TCP")
Reviewed-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David Wei <dw@davidwei.uk>
Link: https://patch.msgid.link/20250812182907.1540755-1-dw@davidwei.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When `devm_add_action_or_reset()` fails, it is due to a failed memory
allocation and will thus return `-ENOMEM`. `dev_err_probe()` doesn't do
anything when error is `-ENOMEM`. Therefore, remove the useless call to
`dev_err_probe()` when `devm_add_action_or_reset()` fails, and just
return the value instead.
Signed-off-by: Waqar Hameed <waqar.hameed@axis.com>
Reviewed-by: Joe Damato <joe@dama.to>
Link: https://patch.msgid.link/pnd1ppghh4p.a.out@axis.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Replace the strcpy() calls that copy the device name into ifr->ifr_name
with strscpy() to avoid potential overflows and guarantee NULL termination.
Destination is ifr->ifr_name (size IFNAMSIZ).
Tested in QEMU (BusyBox rootfs):
- Created TUN devices via TUNSETIFF helper
- Set addresses and brought links up
- Verified long interface names are safely truncated (IFNAMSIZ-1)
Signed-off-by: Miguel García <miguelgarciaroman8@gmail.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20250812082244.60240-1-miguelgarciaroman8@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
