For different firmware type, it could change IDMEM mode, so reset it to
default to avoid encountering error for RTL8851B/RTL8852B/RTL8852BT
if that kind of firmware was downloaded before.
rtw89_8851be 0000:02:00.0: Firmware version 0.29.41.3, cmd version 0, type 5
rtw89_8851be 0000:02:00.0: Firmware version 0.29.41.3, cmd version 0, type 3
rtw89_8851be 0000:02:00.0: MAC has already powered on
rtw89_8851be 0000:02:00.0: fw security fail
rtw89_8851be 0000:02:00.0: download firmware fail
rtw89_8851be 0000:02:00.0: [ERR]fwdl 0x1E0 = 0x62
rtw89_8851be 0000:02:00.0: [ERR]fwdl 0x83F2 = 0x8
rtw89_8851be 0000:02:00.0: [ERR]fw PC = 0xb892f51c
rtw89_8851be 0000:02:00.0: [ERR]fw PC = 0xb892f524
rtw89_8851be 0000:02:00.0: [ERR]fw PC = 0xb892f51c
rtw89_8851be 0000:02:00.0: [ERR]fw PC = 0xb892f500
rtw89_8851be 0000:02:00.0: [ERR]fw PC = 0xb892f51c
rtw89_8851be 0000:02:00.0: [ERR]fw PC = 0xb892f53c
rtw89_8851be 0000:02:00.0: [ERR]fw PC = 0xb892f520
rtw89_8851be 0000:02:00.0: [ERR]fw PC = 0xb892f520
rtw89_8851be 0000:02:00.0: [ERR]fw PC = 0xb892f508
rtw89_8851be 0000:02:00.0: [ERR]fw PC = 0xb892f534
rtw89_8851be 0000:02:00.0: [ERR]fw PC = 0xb892f520
rtw89_8851be 0000:02:00.0: [ERR]fw PC = 0xb892f534
rtw89_8851be 0000:02:00.0: [ERR]fw PC = 0xb892f508
rtw89_8851be 0000:02:00.0: [ERR]fw PC = 0xb892f53c
rtw89_8851be 0000:02:00.0: [ERR]fw PC = 0xb892f524
rtw89_8851be 0000:02:00.0: failed to setup chip information
rtw89_8851be: probe of 0000:02:00.0 failed with error -16
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20240724052626.12774-4-pkshih@realtek.com
Add support for ieee80211::rfkill_poll ops. This enables periodic
monitoring of the hardware rfkill state, triggering updates when the
status changes.
Signed-off-by: Kuan-Chung Chen <damon.chen@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20240724052626.12774-3-pkshih@realtek.com
To more accurately debug performance issues, EVM statistics will
differentiate between different space streams, and only beacon
and data frames will be included.
Signed-off-by: Kuan-Chung Chen <damon.chen@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20240724052626.12774-2-pkshih@realtek.com
For CCK packets we could get incorrect reports from hardware.
And this causes wrong frequencies being reported. Parse the channel
information from IE if provided by AP to fix this.
Signed-off-by: Po-Hao Huang <phhuang@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20240724050501.7550-1-pkshih@realtek.com
The definition of GET_RX_DESC_BW is incorrect. Fix it according to the
GET_RX_STATUS_DESC_BW_8703B macro from the official driver.
Tested only with RTL8812AU, which uses the same bits.
Cc: stable@vger.kernel.org
Fixes: 9bb762b3a9 ("wifi: rtw88: Add definitions for 8703b chip")
Signed-off-by: Bitterblue Smith <rtl8821cerfe2@gmail.com>
Tested-by: Fiona Klute <fiona.klute@gmx.de>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/1cfed9d5-4304-4b96-84c5-c347f59fedb9@gmail.com
"iw dev wlp2s0 station dump" shows incorrect rx bitrate:
tx bitrate: 866.7 MBit/s VHT-MCS 9 80MHz short GI VHT-NSS 2
rx bitrate: 86.7 MBit/s VHT-MCS 9 VHT-NSS 1
This is because the RX band width is calculated incorrectly. Fix the
calculation according to the phydm_rxsc_2_bw() function from the
official drivers.
After:
tx bitrate: 866.7 MBit/s VHT-MCS 9 80MHz short GI VHT-NSS 2
rx bitrate: 390.0 MBit/s VHT-MCS 9 80MHz VHT-NSS 1
It also works correctly with the AP configured for 20 MHz and 40 MHz.
Tested with RTL8822CE.
Cc: stable@vger.kernel.org
Fixes: e3037485c6 ("rtw88: new Realtek 802.11ac driver")
Signed-off-by: Bitterblue Smith <rtl8821cerfe2@gmail.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/bca8949b-e2bd-4515-98fd-70d3049a0097@gmail.com
Add chip_info of RTL8852BT accordingly, including firmware elements
support, MAC memory quota (WDE, PLE and etc), SER IMR used by firmware,
BTC registers, register based H2C/C2H, WoWLAN stub.
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20240720021340.12102-4-pkshih@realtek.com
clang warns precedence of '?:' and '&'. Even though original logic is
correct, use str_enable_disable() to avoid clang confusing. Another way to
fix is to add parentheses around '&', but I choose former one.
>> drivers/net/wireless/realtek/rtw89/rtw8852bt_rfk.c:1827:46: warning:
operator '?:' has lower precedence than '&'; '&' will be evaluated
first [-Wbitwise-conditional-parentheses]
1827 | kidx, dpk->is_dpk_enable & off_reverse ? "enable" : "disable");
| ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ^
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202407200741.dMG9uvHU-lkp@intel.com/
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20240720021340.12102-3-pkshih@realtek.com
We have invoked device coredump when fw crash.
Should select WANT_DEV_COREDUMP by ourselves.
Signed-off-by: Zong-Zhe Yang <kevin_yang@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20240718070616.42217-2-pkshih@realtek.com
We have invoked device coredump when fw crash.
Should select WANT_DEV_COREDUMP by ourselves.
Signed-off-by: Zong-Zhe Yang <kevin_yang@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20240718070616.42217-1-pkshih@realtek.com
Originally in order to read partial registers from large area, we write
a range value stored into a static variable and read registers according
to the static variable.
However, if we install more than one adapters supported by this driver,
the static variables will be overwritten by latter adapters. To resolve
the problem, move the static variables to struct rtw_dev for each adapter.
With changes, smatch spends too much time to parse rtw_debugfs_init():
debug.c:1289 rtw_debugfs_init() parse error: turning off implications
after 60 seconds
Move stuffs of adding debugfs entries to three rtw_debugfs_add_xxx()
functions.
Reported-by: Bitterblue Smith <rtl8821cerfe2@gmail.com>
Closes: https://lore.kernel.org/linux-wireless/cd6a2acf3c2c36d938b40140b52a779516f446a9.camel@realtek.com/T/#m27662022c70d9f893ba96f6c6a8dd8fce2434dfe
Tested-by: Bitterblue Smith <rtl8821cerfe2@gmail.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20240718064155.38955-1-pkshih@realtek.com
Remove VID/PID 0bda:c82c as it was inadvertently added to the device
list in driver rtw8821cu. This VID/PID is for the rtw8822cu device
and it is already in the appropriate place for that device.
Cc: stable@vger.kernel.org
Signed-off-by: Nick Morrow <morrownr@gmail.com>
Signed-off-by: Bitterblue Smith <rtl8821cerfe2@gmail.com>
Acked-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/335d7fa1-0ba5-4b86-bba5-f98834ace1f8@gmail.com
The Realtek wifi 5 devices which support USB 3 are weird: when first
plugged in, they pretend to be USB 2. The driver needs to send some
commands to the device, which make it disappear and come back as a
USB 3 device.
Implement the required commands in rtw88.
When a USB 3 device is plugged into a USB 2 port, rtw88 will try to
switch it to USB 3 mode only once. The device will disappear and come
back still in USB 2 mode, of course.
Some people experience heavy interference in the 2.4 GHz band in
USB 3 mode, so add a module parameter switch_usb_mode with the
default value 1 to let people disable the switching.
Signed-off-by: Bitterblue Smith <rtl8821cerfe2@gmail.com>
Acked-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/77906c62-5674-426f-bde1-1b2a12a0339d@gmail.com
efuse->ext_lna_2g is set twice and efuse->ext_lna_5g is not set at all.
Set each one once.
Nothing uses these members right now. They will be used by the RTL8821AU
and RTL8812AU drivers.
Signed-off-by: Bitterblue Smith <rtl8821cerfe2@gmail.com>
Acked-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/8ccc9e13-0d45-417d-8f88-93a0ad294f77@gmail.com
If we encounter an error on i2c packet transmit, we won't have a valid
flow anymore; since we didn't transmit a valid packet sequence, we'll
have to wait for the key to timeout instead of dropping it on the reply.
This causes the i2c lock to be held for longer than necessary.
Instead, invalidate the flow on TX error, and release the i2c lock
immediately.
Cc: Bonnie Lo <Bonnie_Lo@wiwynn.com>
Tested-by: Jerry C Chen <Jerry_C_Chen@wiwynn.com>
Signed-off-by: Jeremy Kerr <jk@codeconstruct.com.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
When handling colliding L2TPv3 session IDs, we use the existing
session IDR entry and link the new session on that using
session->coll_list. However, when using an existing IDR entry, we must
not do the idr_replace step.
Fixes: aa5e17e1f5 ("l2tp: store l2tpv3 sessions in per-net IDR")
Signed-off-by: James Chapman <jchapman@katalix.com>
Signed-off-by: Tom Parkin <tparkin@katalix.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
link_is_up() and tipc_link_is_up() have the same functionality.
Consolidate these functions.
Signed-off-by: Shigeru Yoshida <syoshida@redhat.com>
Reviewed-by: Tung Nguyen <tung.q.nguyen@endava.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
struct tipc_name_table in core.h is not used. Remove this declaration.
Signed-off-by: Shigeru Yoshida <syoshida@redhat.com>
Reviewed-by: Tung Nguyen <tung.q.nguyen@endava.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Breno Leitao says:
====================
netconsole: improve code clarity
These changes aim to enhance the reliability of netconsole by
eliminating the potential race condition and improve maintainability
by making the code more straightforward to understand and modify.
====================
Link: https://patch.msgid.link/20240709144403.544099-1-leitao@debian.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When disabling a netconsole target, enabled_store() is called with
enabled=false. Currently, this results in updating the nt->enabled
field twice:
1. Inside the if/else block, with the target_list_lock spinlock held
2. Later, without the target_list_lock
This patch eliminates the redundancy by setting the field only once,
improving efficiency and reducing potential race conditions.
Signed-off-by: Breno Leitao <leitao@debian.org>
Link: https://patch.msgid.link/20240709144403.544099-3-leitao@debian.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The 'enabled' variable is already a bool, so casting it to its value
is redundant.
Remove the superfluous cast, improving code clarity without changing
functionality.
Signed-off-by: Breno Leitao <leitao@debian.org>
Link: https://patch.msgid.link/20240709144403.544099-2-leitao@debian.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
There are a couple of places where the test script "sleep"s to wait for
some external condition to be met.
This is error prone, specially in slow systems (identified in CI by
"KSFT_MACHINE_SLOW=yes").
To fix this, add a "ovs_wait" function that tries to execute a command
a few times until it succeeds. The timeout used is set to 5s for
"normal" systems and doubled if a slow CI machine is detected.
This should make the following work:
$ vng --build \
--config tools/testing/selftests/net/config \
--config kernel/configs/debug.config
$ vng --run . --user root -- "make -C tools/testing/selftests/ \
KSFT_MACHINE_SLOW=yes TARGETS=net/openvswitch run_tests"
Signed-off-by: Adrian Moreno <amorenoz@redhat.com>
Reviewed-by: Ilya Maximets <i.maximets@ovn.org>
Link: https://patch.msgid.link/20240710090500.1655212-1-amorenoz@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In fact, this structure contains a flexible array at the end, but
historically its size, alignment etc., is calculated manually.
There are several instances of the structure embedded into other
structures, but also there's ongoing effort to remove them and we
could in the meantime declare &net_device properly.
Declare the array explicitly, use struct_size() and store the array
size inside the structure, so that __counted_by() can be applied.
Don't use PTR_ALIGN(), as SLUB itself tries its best to ensure the
allocated buffer is aligned to what the user expects.
Also, change its alignment from %NETDEV_ALIGN to the cacheline size
as per several suggestions on the netdev ML.
bloat-o-meter for vmlinux:
free_netdev 445 440 -5
netdev_freemem 24 - -24
alloc_netdev_mqs 1481 1450 -31
On x86_64 with several NICs of different vendors, I was never able to
get a &net_device pointer not aligned to the cacheline size after the
change.
Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Signed-off-by: Breno Leitao <leitao@debian.org>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Kees Cook <kees@kernel.org>
Link: https://patch.msgid.link/20240710113036.2125584-1-leitao@debian.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
A typo makes PSAMPLE_ATTR_SAMPLE_RATE netlink flag be added to the wrong
sk_buff.
Fix the error and make the input sk_buff pointer "const" so that it
doesn't happen again.
Acked-by: Eelco Chaudron <echaudro@redhat.com>
Fixes: 7b1b2b60c6 ("net: psample: allow using rate as probability")
Signed-off-by: Adrian Moreno <amorenoz@redhat.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Antoine Tenart <atenart@kernel.org>
Link: https://patch.msgid.link/20240710171004.2164034-1-amorenoz@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
To have enough space to write all possible sprintf() args. Currently
'name' size is 16, but the first '%s' specifier may already need at
least 16 characters, since 'bnad->netdev->name' is used there.
For '%d' specifiers, assume that they require:
* 1 char for 'tx_id + tx_info->tcb[i]->id' sum, BNAD_MAX_TXQ_PER_TX is 8
* 2 chars for 'rx_id + rx_info->rx_ctrl[i].ccb->id', BNAD_MAX_RXP_PER_RX
is 16
And replace sprintf with snprintf.
Detected using the static analysis tool - Svace.
Fixes: 8b230ed8ec ("bna: Brocade 10Gb Ethernet device driver")
Signed-off-by: Alexey Kodanev <aleksei.kodanev@bell-sw.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Most likely the last "new features" pull request for v6.11 with
changes both in stack and in drivers. The big thing is the multiple
radios for wiphy feature which makes it possible to better advertise
radio capabilities to user space. mt76 enabled MLO and iwlwifi
re-enabled MLO, ath12k and rtw89 Wi-Fi 6 devices got WoWLAN support.
Major changes:
cfg80211/mac80211
* remove DEAUTH_NEED_MGD_TX_PREP flag
* multiple radios per wiphy support
mac80211_hwsim
* multi-radio wiphy support
ath12k
* DebugFS support for datapath statistics
* WCN7850: support for WoW (Wake on WLAN)
* WCN7850: device-tree bindings
ath11k
* QCA6390: device-tree bindings
iwlwifi
* mvm: re-enable Multi-Link Operation (MLO)
* aggregation (A-MSDU) optimisations
rtw89
* preparation for RTL8852BE-VT support
* WoWLAN support for WiFi 6 chips
* 36-bit PCI DMA support
mt76
* mt7925 Multi-Link Operation (MLO) support
-----BEGIN PGP SIGNATURE-----
iQFFBAABCgAvFiEEiBjanGPFTz4PRfLobhckVSbrbZsFAmaPsBQRHGt2YWxvQGtl
cm5lbC5vcmcACgkQbhckVSbrbZt9EQf/Wevf/RnKyHhcuW4kmv0cxnjLW39K7CAh
ZlfN2JNTsVk4Na1EBjUgVyAWGdnGQpEhQlJYDExHcf5iD12pMVMIAQS8JXTDxuva
+ErAN1652p2N8nFCkNNuGbjYfO0D61xSIQj2uHhAlafK2k8FwnSn6XPP6jjHWvur
Acmw6W6l8eL+MP2K1VN2/2S09Gr6IQs7gXgWQX/6CaoK+OynFbUg8T9GQ2aqjr+d
lD17YB+oOHNCBxvg9LtBhKdfV14OBkKT6hW+YEqsrBEbx3N07ogDkPO0NUUPMXN3
IePEhj4XXrJ5UBMTvgWzNG9CwPeZFwuKGga+HZO9RKF5rwu42LsUMA==
=MpwE
-----END PGP SIGNATURE-----
Merge tag 'wireless-next-2024-07-11' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next
Kalle Valo says:
====================
wireless-next patches for v6.11
Most likely the last "new features" pull request for v6.11 with
changes both in stack and in drivers. The big thing is the multiple
radios for wiphy feature which makes it possible to better advertise
radio capabilities to user space. mt76 enabled MLO and iwlwifi
re-enabled MLO, ath12k and rtw89 Wi-Fi 6 devices got WoWLAN support.
Major changes:
cfg80211/mac80211
* remove DEAUTH_NEED_MGD_TX_PREP flag
* multiple radios per wiphy support
mac80211_hwsim
* multi-radio wiphy support
ath12k
* DebugFS support for datapath statistics
* WCN7850: support for WoW (Wake on WLAN)
* WCN7850: device-tree bindings
ath11k
* QCA6390: device-tree bindings
iwlwifi
* mvm: re-enable Multi-Link Operation (MLO)
* aggregation (A-MSDU) optimisations
rtw89
* preparation for RTL8852BE-VT support
* WoWLAN support for WiFi 6 chips
* 36-bit PCI DMA support
mt76
* mt7925 Multi-Link Operation (MLO) support
* tag 'wireless-next-2024-07-11' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next: (204 commits)
wifi: mac80211: fix AP chandef capturing in CSA
wifi: iwlwifi: correctly reference TSO page information
wifi: mt76: mt792x: fix scheduler interference in drv own process
wifi: mt76: mt7925: enabling MLO when the firmware supports it
wifi: mt76: mt7925: remove the unused mt7925_mcu_set_chan_info
wifi: mt76: mt7925: update mt7925_mac_link_bss_add for MLO
wifi: mt76: mt7925: update mt7925_mcu_bss_basic_tlv for MLO
wifi: mt76: mt7925: update mt7925_mcu_set_timing for MLO
wifi: mt76: mt7925: update mt7925_mcu_sta_phy_tlv for MLO
wifi: mt76: mt7925: update mt7925_mcu_sta_rate_ctrl_tlv for MLO
wifi: mt76: mt7925: add mt7925_mcu_sta_eht_mld_tlv for MLO
wifi: mt76: mt7925: update mt7925_mcu_sta_update for MLO
wifi: mt76: mt7925: update mt7925_mcu_add_bss_info for MLO
wifi: mt76: mt7925: update mt7925_mcu_bss_mld_tlv for MLO
wifi: mt76: mt7925: update mt7925_mcu_sta_mld_tlv for MLO
wifi: mt76: mt7925: add mt7925_[assign,unassign]_vif_chanctx
wifi: mt76: add def_wcid to struct mt76_wcid
wifi: mt76: mt7925: report link information in rx status
wifi: mt76: mt7925: update rate index according to link id
wifi: mt76: mt7925: add link handling in the mt7925_ipv6_addr_change
...
====================
Link: https://patch.msgid.link/20240711102353.0C849C116B1@smtp.kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
IFLA_MAX is increasing slowly but surely.
Some compilers use more than 512 bytes of stack in rtnetlink_rcv_msg()
because it calls rtnl_calcit() for RTM_GETLINK message.
Use noinline_for_stack attribute to not inline rtnl_calcit(),
and directly use nla_for_each_attr_type() (Jakub suggestion)
because we only care about IFLA_EXT_MASK at this stage.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20240710151653.3786604-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Replace a comma between expression statements by a semicolon.
Signed-off-by: Chen Ni <nichen@iscas.ac.cn>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20240709072838.1152880-1-nichen@iscas.ac.cn
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jakub Kicinski says:
====================
ethtool: use the rss context XArray in ring deactivation safety-check
Now that we have an XArray storing information about all extra
RSS contexts - use it to extend checks already performed using
ethtool_get_max_rxfh_channel().
====================
Link: https://patch.msgid.link/20240710174043.754664-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
ethtool_get_max_rxfh_channel() gets called when user requests
deactivating Rx channels. Check the additional RSS contexts, too.
While we do track whether RSS context has an indirection
table explicitly set by the user, no driver looks at that bit.
Assume drivers won't auto-regenerate the additional tables,
to be safe.
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/20240710174043.754664-3-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Commit 0d1b7d6c92 ("bnxt: fix crashes when reducing ring count with
active RSS contexts") proves that allowing indirection table to contain
channels with out of bounds IDs may lead to crashes. Currently the
max channel check in the core gets skipped if driver can't fetch
the indirection table or when we can't allocate memory.
Both of those conditions should be extremely rare but if they do
happen we should try to be safe and fail the channel change.
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/20240710174043.754664-2-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Cross-merge networking fixes after downstream PR.
Conflicts:
net/sched/act_ct.c
26488172b0 ("net/sched: Fix UAF when resolving a clash")
3abbd7ed8b ("act_ct: prepare for stolen verdict coming from conntrack and nat engine")
No adjacent changes.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
There is a spelling mistake in a dev_err message. Fix it.
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Acked-by: Kory Maincent <Kory.maincent@bootlin.com>
Link: https://patch.msgid.link/20240709105222.168306-1-colin.i.king@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Current release - regressions:
- core: fix rc7's __skb_datagram_iter() regression
Current release - new code bugs:
- eth: bnxt: fix crashes when reducing ring count with active RSS contexts
Previous releases - regressions:
- sched: fix UAF when resolving a clash
- skmsg: skip zero length skb in sk_msg_recvmsg2
- sunrpc: fix kernel free on connection failure in xs_tcp_setup_socket
- tcp: avoid too many retransmit packets
- tcp: fix incorrect undo caused by DSACK of TLP retransmit
- udp: Set SOCK_RCU_FREE earlier in udp_lib_get_port().
- eth: ks8851: fix deadlock with the SPI chip variant
- eth: i40e: fix XDP program unloading while removing the driver
Previous releases - always broken:
- bpf:
- fix too early release of tcx_entry
- fail bpf_timer_cancel when callback is being cancelled
- bpf: fix order of args in call to bpf_map_kvcalloc
- netfilter: nf_tables: prefer nft_chain_validate
- ppp: reject claimed-as-LCP but actually malformed packets
- wireguard: avoid unaligned 64-bit memory accesses
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
-----BEGIN PGP SIGNATURE-----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=qwVA
-----END PGP SIGNATURE-----
Merge tag 'net-6.10-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Paolo Abeni:
"Including fixes from bpf and netfilter.
Current release - regressions:
- core: fix rc7's __skb_datagram_iter() regression
Current release - new code bugs:
- eth: bnxt: fix crashes when reducing ring count with active RSS
contexts
Previous releases - regressions:
- sched: fix UAF when resolving a clash
- skmsg: skip zero length skb in sk_msg_recvmsg2
- sunrpc: fix kernel free on connection failure in
xs_tcp_setup_socket
- tcp: avoid too many retransmit packets
- tcp: fix incorrect undo caused by DSACK of TLP retransmit
- udp: Set SOCK_RCU_FREE earlier in udp_lib_get_port().
- eth: ks8851: fix deadlock with the SPI chip variant
- eth: i40e: fix XDP program unloading while removing the driver
Previous releases - always broken:
- bpf:
- fix too early release of tcx_entry
- fail bpf_timer_cancel when callback is being cancelled
- bpf: fix order of args in call to bpf_map_kvcalloc
- netfilter: nf_tables: prefer nft_chain_validate
- ppp: reject claimed-as-LCP but actually malformed packets
- wireguard: avoid unaligned 64-bit memory accesses"
* tag 'net-6.10-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (33 commits)
net, sunrpc: Remap EPERM in case of connection failure in xs_tcp_setup_socket
net/sched: Fix UAF when resolving a clash
net: ks8851: Fix potential TX stall after interface reopen
udp: Set SOCK_RCU_FREE earlier in udp_lib_get_port().
netfilter: nf_tables: prefer nft_chain_validate
netfilter: nfnetlink_queue: drop bogus WARN_ON
ethtool: netlink: do not return SQI value if link is down
ppp: reject claimed-as-LCP but actually malformed packets
selftests/bpf: Add timer lockup selftest
net: ethernet: mtk-star-emac: set mac_managed_pm when probing
e1000e: fix force smbus during suspend flow
tcp: avoid too many retransmit packets
bpf: Defer work in bpf_timer_cancel_and_free
bpf: Fail bpf_timer_cancel when callback is being cancelled
bpf: fix order of args in call to bpf_map_kvcalloc
net: ethernet: lantiq_etop: fix double free in detach
i40e: Fix XDP program unloading while removing the driver
net: fix rc7's __skb_datagram_iter()
net: ks8851: Fix deadlock with the SPI chip variant
octeontx2-af: Fix incorrect value output on error path in rvu_check_rsrc_availability()
...
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRAhzRXHqcMeLMyaSiRxhvAZXjcogUCZo9dYAAKCRCRxhvAZXjc
omYQAP4wELNW5StzljRReC6s/Kzu6IANJQlfFpuGnPIl23iRmwD+Pq433xQqSy5f
uonMBEdxqbOrJM7A6KeHKCyuAKYpNg0=
=zg3n
-----END PGP SIGNATURE-----
Merge tag 'vfs-6.10-rc8.fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull vfs fixes from Christian Brauner:
"cachefiles:
- Export an existing and add a new cachefile helper to be used in
filesystems to fix reference count bugs
- Use the newly added fscache_ty_get_volume() helper to get a
reference count on an fscache_volume to handle volumes that are
about to be removed cleanly
- After withdrawing a fscache_cache via FSCACHE_CACHE_IS_WITHDRAWN
wait for all ongoing cookie lookups to complete and for the object
count to reach zero
- Propagate errors from vfs_getxattr() to avoid an infinite loop in
cachefiles_check_volume_xattr() because it keeps seeing ESTALE
- Don't send new requests when an object is dropped by raising
CACHEFILES_ONDEMAND_OJBSTATE_DROPPING
- Cancel all requests for an object that is about to be dropped
- Wait for the ondemand_boject_worker to finish before dropping a
cachefiles object to prevent use-after-free
- Use cyclic allocation for message ids to better handle id recycling
- Add missing lock protection when iterating through the xarray when
polling
netfs:
- Use standard logging helpers for debug logging
VFS:
- Fix potential use-after-free in file locks during
trace_posix_lock_inode(). The tracepoint could fire while another
task raced it and freed the lock that was requested to be traced
- Only increment the nr_dentry_negative counter for dentries that are
present on the superblock LRU. Currently, DCACHE_LRU_LIST list is
used to detect this case. However, the flag is also raised in
combination with DCACHE_SHRINK_LIST to indicate that dentry->d_lru
is used. So checking only DCACHE_LRU_LIST will lead to wrong
nr_dentry_negative count. Fix the check to not count dentries that
are on a shrink related list
Misc:
- hfsplus: fix an uninitialized value issue in copy_name
- minix: fix minixfs_rename with HIGHMEM. It still uses kunmap() even
though we switched it to kmap_local_page() a while ago"
* tag 'vfs-6.10-rc8.fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
minixfs: Fix minixfs_rename with HIGHMEM
hfsplus: fix uninit-value in copy_name
vfs: don't mod negative dentry count when on shrinker list
filelock: fix potential use-after-free in posix_lock_inode
cachefiles: add missing lock protection when polling
cachefiles: cyclic allocation of msg_id to avoid reuse
cachefiles: wait for ondemand_object_worker to finish when dropping object
cachefiles: cancel all requests for the object that is being dropped
cachefiles: stop sending new request when dropping object
cachefiles: propagate errors from vfs_getxattr() to avoid infinite loop
cachefiles: fix slab-use-after-free in cachefiles_withdraw_cookie()
cachefiles: fix slab-use-after-free in fscache_withdraw_volume()
netfs, fscache: export fscache_put_volume() and add fscache_try_get_volume()
netfs: Switch debug logging to pr_debug()
-----BEGIN PGP SIGNATURE-----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=Bt/k
-----END PGP SIGNATURE-----
Merge tag 'nf-24-07-11' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf
Pablo Neira Ayuso says:
====================
Netfilter fixes for net
The following batch contains Netfilter fixes for net:
Patch #1 fixes a bogus WARN_ON splat in nfnetlink_queue.
Patch #2 fixes a crash due to stack overflow in chain loop detection
by using the existing chain validation routines
Both patches from Florian Westphal.
netfilter pull request 24-07-11
* tag 'nf-24-07-11' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf:
netfilter: nf_tables: prefer nft_chain_validate
netfilter: nfnetlink_queue: drop bogus WARN_ON
====================
Link: https://patch.msgid.link/20240711093948.3816-1-pablo@netfilter.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQTFp0I1jqZrAX+hPRXbK58LschIgwUCZo+YhgAKCRDbK58LschI
gyutAP9h32BTAQQ6p4AxyXKSQvrQU8Ha0kQLhsBDPRjh/O1QqQD9F26ohaTdJTMZ
PduJdIl521nte7Lk5xHQgkYZ7FnMygM=
=sIFy
-----END PGP SIGNATURE-----
Merge tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf
Daniel Borkmann says:
====================
pull-request: bpf 2024-07-11
The following pull-request contains BPF updates for your *net* tree.
We've added 4 non-merge commits during the last 2 day(s) which contain
a total of 4 files changed, 262 insertions(+), 19 deletions(-).
The main changes are:
1) Fixes for a BPF timer lockup and a use-after-free scenario when timers
are used concurrently, from Kumar Kartikeya Dwivedi.
2) Fix the argument order in the call to bpf_map_kvcalloc() which could
otherwise lead to a compilation error, from Mohammad Shehar Yaar Tausif.
bpf-for-netdev
* tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf:
selftests/bpf: Add timer lockup selftest
bpf: Defer work in bpf_timer_cancel_and_free
bpf: Fail bpf_timer_cancel when callback is being cancelled
bpf: fix order of args in call to bpf_map_kvcalloc
====================
Link: https://patch.msgid.link/20240711084016.25757-1-daniel@iogearbox.net
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
When using a BPF program on kernel_connect(), the call can return -EPERM. This
causes xs_tcp_setup_socket() to loop forever, filling up the syslog and causing
the kernel to potentially freeze up.
Neil suggested:
This will propagate -EPERM up into other layers which might not be ready
to handle it. It might be safer to map EPERM to an error we would be more
likely to expect from the network system - such as ECONNREFUSED or ENETDOWN.
ECONNREFUSED as error seems reasonable. For programs setting a different error
can be out of reach (see handling in 4fbac77d2d) in particular on kernels
which do not have f10d059661 ("bpf: Make BPF_PROG_RUN_ARRAY return -err
instead of allow boolean"), thus given that it is better to simply remap for
consistent behavior. UDP does handle EPERM in xs_udp_send_request().
Fixes: d74bad4e74 ("bpf: Hooks for sys_connect")
Fixes: 4fbac77d2d ("bpf: Hooks for sys_bind")
Co-developed-by: Lex Siegel <usiegl00@gmail.com>
Signed-off-by: Lex Siegel <usiegl00@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Cc: Neil Brown <neilb@suse.de>
Cc: Trond Myklebust <trondmy@kernel.org>
Cc: Anna Schumaker <anna@kernel.org>
Link: https://github.com/cilium/cilium/issues/33395
Link: https://lore.kernel.org/bpf/171374175513.12877.8993642908082014881@noble.neil.brown.name
Link: https://patch.msgid.link/9069ec1d59e4b2129fc23433349fd5580ad43921.1720075070.git.daniel@iogearbox.net
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The amount of TX space in the hardware buffer is tracked in the tx_space
variable. The initial value is currently only set during driver probing.
After closing the interface and reopening it the tx_space variable has
the last value it had before close. If it is smaller than the size of
the first send packet after reopeing the interface the queue will be
stopped. The queue is woken up after receiving a TX interrupt but this
will never happen since we did not send anything.
This commit moves the initialization of the tx_space variable to the
ks8851_net_open function right before starting the TX queue. Also query
the value from the hardware instead of using a hard coded value.
Only the SPI chip variant is affected by this issue because only this
driver variant actually depends on the tx_space variable in the xmit
function.
Fixes: 3dc5d44545 ("net: ks8851: Fix TX stall caused by TX buffer overrun")
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Paolo Abeni <pabeni@redhat.com>
Cc: Simon Horman <horms@kernel.org>
Cc: netdev@vger.kernel.org
Cc: stable@vger.kernel.org # 5.10+
Signed-off-by: Ronald Wahl <ronald.wahl@raritan.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/20240709195845.9089-1-rwahl@gmx.de
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
nft_chain_validate already performs loop detection because a cycle will
result in a call stack overflow (ctx->level >= NFT_JUMP_STACK_SIZE).
It also follows maps via ->validate callback in nft_lookup, so there
appears no reason to iterate the maps again.
nf_tables_check_loops() and all its helper functions can be removed.
This improves ruleset load time significantly, from 23s down to 12s.
This also fixes a crash bug. Old loop detection code can result in
unbounded recursion:
BUG: TASK stack guard page was hit at ....
Oops: stack guard page: 0000 [#1] PREEMPT SMP KASAN
CPU: 4 PID: 1539 Comm: nft Not tainted 6.10.0-rc5+ #1
[..]
with a suitable ruleset during validation of register stores.
I can't see any actual reason to attempt to check for this from
nft_validate_register_store(), at this point the transaction is still in
progress, so we don't have a full picture of the rule graph.
For nf-next it might make sense to either remove it or make this depend
on table->validate_state in case we could catch an error earlier
(for improved error reporting to userspace).
Fixes: 20a69341f2 ("netfilter: nf_tables: add netlink set API")
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Happens when rules get flushed/deleted while packet is out, so remove
this WARN_ON.
This WARN exists in one form or another since v4.14, no need to backport
this to older releases, hence use a more recent fixes tag.
Fixes: 3f80196888 ("netfilter: move nf_reinject into nfnetlink_queue modules")
Reported-by: kernel test robot <oliver.sang@intel.com>
Closes: https://lore.kernel.org/oe-lkp/202407081453.11ac0f63-lkp@intel.com
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Do not attach SQI value if link is down. "SQI values are only valid if
link-up condition is present" per OpenAlliance specification of
100Base-T1 Interoperability Test suite [1]. The same rule would apply
for other link types.
[1] https://opensig.org/automotive-ethernet-specifications/#
Fixes: 8066021915 ("ethtool: provide UAPI for PHY Signal Quality Index (SQI)")
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Woojung Huh <woojung.huh@microchip.com>
Link: https://patch.msgid.link/20240709061943.729381-1-o.rempel@pengutronix.de
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
