pm_sleep_ptr() depends on CONFIG_PM_SLEEP while pm_ptr() depends on
CONFIG_PM. Since ST SSC4 implements runtime PM it makes sense using
pm_ptr() here.
For the same reason replace PM macros that use CONFIG_PM. Doing so
prevents from using __maybe_unused attribute of runtime PM functions.
Link: https://lore.kernel.org/lkml/CAMuHMdX9nkROkAJJ5odv4qOWe0bFTmaFs=Rfxsfuc9+DT-bsEQ@mail.gmail.com
Fixes: 6f8584a482 ("spi: st: Switch from CONFIG_PM_SLEEP guards to pm_sleep_ptr()")
Signed-off-by: Raphael Gallais-Pou <rgallaispou@gmail.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://patch.msgid.link/20250820180310.9605-1-rgallaispou@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The OOB layout used by the driver has two distinct regions which contains
hardware specific ECC data, yet the qcom_spi_ooblayout_ecc() function sets
the same offset and length values for both regions which is clearly wrong.
Change the code to calculate the correct values for both regions.
For reference, the following table shows the computed offset and length
values for various OOB size/ECC strength configurations:
+-----------------+-----------------+
|before the change| after the change|
+-------+----------+--------+--------+--------+--------+--------+
| OOB | ECC | region | region | region | region | region |
| size | strength | index | offset | length | offset | length |
+-------+----------+--------+--------+--------+--------+--------+
| 128 | 8 | 0 | 113 | 15 | 0 | 49 |
| | | 1 | 113 | 15 | 65 | 63 |
+-------+----------+--------+--------+--------+--------+--------+
| 128 | 4 | 0 | 117 | 11 | 0 | 37 |
| | | 1 | 117 | 11 | 53 | 75 |
+-------+----------+--------+--------+--------+--------+--------+
| 64 | 4 | 0 | 53 | 11 | 0 | 37 |
| | | 1 | 53 | 11 | 53 | 11 |
+-------+----------+--------+--------+--------+--------+--------+
Fixes: 7304d19090 ("spi: spi-qpic: add driver for QCOM SPI NAND flash Interface")
Signed-off-by: Gabor Juhos <j4g8y7@gmail.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://patch.msgid.link/20250805-qpic-snand-oob-ecc-fix-v2-1-e6f811c70d6f@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Currently the driver is not able to handle the case that a SPI device
specifies a higher spi-max-frequency than half of per-clk:
per-clk should be at least two times of transfer speed
Fix this by clamping to the max possible value and use the minimum SCK
period of 2 cycles.
Fixes: 77736a98b8 ("spi: lpspi: add the error info of transfer speed setting")
Signed-off-by: Stefan Wahren <wahrenst@gmx.net>
Link: https://patch.msgid.link/20250807100742.9917-1-wahrenst@gmx.net
Signed-off-by: Mark Brown <broonie@kernel.org>
The function spi_mem_adjust_op_freq() within spi_mem_exec_op() adjusts
the op->max_freq, which will informs the SPI controller of the maximum
frequency for each operation. This adjustment is based on combined
information from the SPI device and the board's wiring conditions.
Similarly, spi_mem_supports_op() will check the capabilities of the SPI
controller. It also requires the combined information before it can
accurately determine whether the SPI controller supports a given operation.
Signed-off-by: Tianyu Xu <tianyxu@cisco.com>
Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://patch.msgid.link/20250805015403.43928-1-tianyxu@cisco.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The qcom_spi_program_oob() function uses only the last codeword to write
the OOB data into the flash, but it sets the CW_PER_PAGE field in the
CFG0 register as it would use all codewords.
It seems that this confuses the hardware somehow, and any access to the
flash fails with a timeout error after the function is called. The problem
can be easily reproduced with the following commands:
# dd if=/dev/zero bs=2176 count=1 > /tmp/test.bin
1+0 records in
1+0 records out
# flash_erase /dev/mtd4 0 0
Erasing 128 Kibyte @ 0 -- 100 % complete
# nandwrite -O /dev/mtd4 /tmp/test.bin
Writing data to block 0 at offset 0x0
# nanddump -o /dev/mtd4 >/dev/null
ECC failed: 0
ECC corrected: 0
Number of bad blocks: 0
Number of bbt blocks: 0
Block size 131072, page size 2048, OOB size 128
Dumping data starting at 0x00000000 and ending at 0x00020000...
[ 33.197605] qcom_snand 79b0000.spi: failure to read oob
libmtd: error!: MEMREADOOB64 ioctl failed for mtd4, offset 0 (eraseblock 0)
error 110 (Operation timed out)
[ 35.277582] qcom_snand 79b0000.spi: failure in submitting cmd descriptor
libmtd: error!: cannot read 2048 bytes from mtd4 (eraseblock 0, offset 2048)
error 110 (Operation timed out)
nanddump: error!: mtd_read
Change the code to use the correct CW_PER_PAGE value to avoid this.
Fixes: 7304d19090 ("spi: spi-qpic: add driver for QCOM SPI NAND flash Interface")
Signed-off-by: Gabor Juhos <j4g8y7@gmail.com>
Link: https://patch.msgid.link/20250801-qpic-snand-oob-cwpp-fix-v1-1-f5a41b86af2e@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The software node does not specify a count of property entries, so the
array must be null-terminated.
When unterminated, this can lead to a fault in the downstream cs35l56
amplifier driver, because the node parse walks off the end of the
array into unknown memory.
Fixes: 0ca645ab5b ("spi: cs42l43: Add speaker id support to the bridge configuration")
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=220371
Signed-off-by: Simon Trimmer <simont@opensource.cirrus.com>
Link: https://patch.msgid.link/20250731160109.1547131-1-simont@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add the MAINTAINERS entries for the Renesas RZ/V2H(P) RSPI
driver.
Signed-off-by: Fabrizio Castro <fabrizio.castro.jz@renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://patch.msgid.link/20250729145110.37258-1-fabrizio.castro.jz@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The check for ns < 0 is always false because variable ns is a u32 which
is not a signed type. Fix this by making ns a s32 type.
Fixes: cef9991e04 ("spi: Add Amlogic SPISG driver")
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Link: https://patch.msgid.link/20250725171701.839927-1-colin.i.king@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The MTD device is blocked from writing to the SPI-NOR chip if any region
of it is write-protected, even if "writeable=1" module parameter is set.
Add ability to bypass this behaviour by introducing new module parameter
"ignore_protestion_status" which allows to rely on the write protection
mechanism of SPI-NOR chip itself, which most modern chips (since
the 1990'+) have already implemented.
Any erase/write operations performed on the write-protected section will
be rejected by the chip.
Signed-off-by: Jakub Czapiga <czapiga@google.com>
Link: https://patch.msgid.link/20250725122542.2633334-1-czapiga@google.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Merge series from Zixian Zeng <sycamoremoon376@gmail.com>:
Add support SPI NOR flash memory controller for SG2042, using upstreamed
SG2044 SPI NOR driver.
Tested on SG2042 Pioneer Box, read, write operations.
Thanks Chen Wang who provided machine and guidance.
Merge series from Xianwei Zhao <xianwei.zhao@amlogic.com>:
Introduced support for the new SPI IP (SPISG). The SPISG is
a communication-oriented SPI controller from Amlogic,supporting
three operation modes: PIO, block DMA, and scatter-gather DMA.
Add the drivers and device tree bindings corresponding to the SPISG.
The Renesas RZ/V2H(P) RSPI IP supports 4-wire and 3-wire
serial communications in both host role and target role.
It can use a DMA, but the I/O can also be driven by the
processor.
RX-only, TX-only, and RX-TX operations are available in
DMA mode, while in processor I/O mode it only RX-TX
operations are supported.
Add a driver to support 4-wire serial communications as
host role in processor I/O mode.
Signed-off-by: Fabrizio Castro <fabrizio.castro.jz@renesas.com>
Link: https://patch.msgid.link/20250704162036.468765-3-fabrizio.castro.jz@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add dt-bindings for the RSPI IP found inside the Renesas RZ/V2H(P)
SoC.
Signed-off-by: Fabrizio Castro <fabrizio.castro.jz@renesas.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://patch.msgid.link/20250704162036.468765-2-fabrizio.castro.jz@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Introduced support for the new SPI IP (SPISG) driver. The SPISG is
a communication-oriented SPI controller from Amlogic,supporting
three operation modes: PIO, block DMA, and scatter-gather DMA.
Due to there is no FIFO, PIO mode can only transfer one word at
a time, which is extremely slow. Therefore, this mode was not
implemented.
Signed-off-by: Sunny Luo <sunny.luo@amlogic.com>
Signed-off-by: Xianwei Zhao <xianwei.zhao@amlogic.com>
Link: https://patch.msgid.link/20250718-spisg-v5-2-b8f0f1eb93a2@amlogic.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The SPISG is a new communication oriented SPI controller of Amlogic, which
supports PIO, block DMA and scatter-gather DMA three operation modes.
Signed-off-by: Sunny Luo <sunny.luo@amlogic.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Xianwei Zhao <xianwei.zhao@amlogic.com>
Link: https://patch.msgid.link/20250718-spisg-v5-1-b8f0f1eb93a2@amlogic.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add support for SOPHGO SG2042 SPI-NOR flash controller.
Signed-off-by: Zixian Zeng <sycamoremoon376@gmail.com>
Reviewed-by: Chen Wang <unicorn_wang@outlook.com> & Tested-by: Chen Wang
Link: https://patch.msgid.link/20250720-sfg-spifmc-v4-3-033188ad801e@gmail.com
Reviewed-by: Chen Wang <unicorn_wang@outlook.com> & Tested-by: Chen Wang
Signed-off-by: Mark Brown <broonie@kernel.org>
SG2044 and SG2042 have similar SPI-NOR flash controller design,
but have incompatibility which causes existing driver
not working on SG2042:
1. SPI-NOR flash controller on SG2042 have no OPT register.
2. FIFO trigger level on SG2042 should be strictly less than 8.
So introduce a new configurable chip_info structure to hold the
different configuration.
Link: https://github.com/sophgo/sophgo-doc/blob/main/SG2042/TRM/source/SPI-flash.rst
Signed-off-by: Zixian Zeng <sycamoremoon376@gmail.com>
Reviewed-by: Chen Wang <unicorn_wang@outlook.com> & Tested-by: Chen Wang
Link: https://patch.msgid.link/20250720-sfg-spifmc-v4-2-033188ad801e@gmail.com
Reviewed-by: Chen Wang <unicorn_wang@outlook.com> & Tested-by: Chen Wang
Signed-off-by: Mark Brown <broonie@kernel.org>
With further testing, directly using the spi-sg2044-nor driver on SG2042
does not work. SG2042 is found to lack full compatibility with SG2044.
SG2044 has OPT register and it's necessary to write but SG2042 does not.
Due to other possible hardware detail differences, it is better
to bind SG2042 independently.
Fixes: 8450f1e0d3 ("spi: dt-bindings: spi-sg2044-nor: Add SOPHGO SG2042")
Signed-off-by: Zixian Zeng <sycamoremoon376@gmail.com>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Reviewed-by: Chen Wang <unicorn_wang@outlook.com> & Tested-by: Chen Wang
Link: https://patch.msgid.link/20250720-sfg-spifmc-v4-1-033188ad801e@gmail.com
Reviewed-by: Chen Wang <unicorn_wang@outlook.com> & Tested-by: Chen Wang
Signed-off-by: Mark Brown <broonie@kernel.org>
Due to the expectations of the SPINAND code, the driver duplicates
the bad block markers during raw OOB reads.
It has been implemented by using two if statements, and due to the
opposite conditions one of conditional codepaths always runs. Since
the effect of both codepaths is the same, remove the if statements
and use a single line solution instead.
Also add a note about why the duplication is required.
No functional changes intended.
Signed-off-by: Gabor Juhos <j4g8y7@gmail.com>
Link: https://patch.msgid.link/20250711-qpic-snand-simplify-bbm-copy-v1-1-dd2608325f72@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Merge series from Heiko Schocher <hs@denx.de>:
This series introduces the changes needed for trivial spi
based sensors from ABB, currently operated from userspace.
This sensors are currently controlled from userspace, ideally
we will add full drivers in the future.
Signed-off-by: Heiko Schocher <hs@denx.de>
Link: https://patch.msgid.link/20250719063355.73111-3-hs@denx.de
Signed-off-by: Mark Brown <broonie@kernel.org>
Add documentation for spi based ABB sensors, which are
currently operated from userspace.
Signed-off-by: Heiko Schocher <hs@denx.de>
Link: https://patch.msgid.link/20250719063355.73111-2-hs@denx.de
Signed-off-by: Mark Brown <broonie@kernel.org>
- Fix timerlat with use of FORTIFY_SOURCE
FORTIFY_SOURCE was added to the stack tracer where it compares the
entry->caller array to having entry->size elements.
timerlat has the following:
memcpy(&entry->caller, fstack->calls, size);
entry->size = size;
Which triggers FORTIFY_SOURCE as the caller is populated before the
entry->size is initialized.
Swap the order to satisfy FORTIFY_SOURCE logic.
- Add down_write(trace_event_sem) when adding trace events in modules
Trace events being added to the ftrace_events array are protected by
the trace_event_sem semaphore. But when loading modules that have
trace events, the addition of the events are not protected by the
semaphore and loading two modules that have events at the same time
can corrupt the list.
Also add a lockdep_assert_held(trace_event_sem) to
_trace_add_event_dirs() to confirm its held when iterating the list.
-----BEGIN PGP SIGNATURE-----
iIoEABYKADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCaH06gBQccm9zdGVkdEBn
b29kbWlzLm9yZwAKCRAp5XQQmuv6qoJsAP0a+/E0f+5g7O/OtYPVEDSCREv1vj9c
3dr0iWopqaOC7gEAw8Vc5iWIHKcB/JuJ+GqALoutL+lihruG26MWkFFsOgU=
=zH5J
-----END PGP SIGNATURE-----
Merge tag 'trace-v6.16-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull tracing fixes from Steven Rostedt:
- Fix timerlat with use of FORTIFY_SOURCE
FORTIFY_SOURCE was added to the stack tracer where it compares the
entry->caller array to having entry->size elements.
timerlat has the following:
memcpy(&entry->caller, fstack->calls, size);
entry->size = size;
Which triggers FORTIFY_SOURCE as the caller is populated before the
entry->size is initialized.
Swap the order to satisfy FORTIFY_SOURCE logic.
- Add down_write(trace_event_sem) when adding trace events in modules
Trace events being added to the ftrace_events array are protected by
the trace_event_sem semaphore. But when loading modules that have
trace events, the addition of the events are not protected by the
semaphore and loading two modules that have events at the same time
can corrupt the list.
Also add a lockdep_assert_held(trace_event_sem) to
_trace_add_event_dirs() to confirm it is held when iterating the
list.
* tag 'trace-v6.16-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
tracing: Add down_write(trace_event_sem) when adding trace event
tracing/osnoise: Fix crash in timerlat_dump_stack()
omap: add missing error check and fix PM disable in probe error
path.
stm32: unmap DMA buffer on transfer failure and use correct
device when mapping and unmapping during transfers.
-----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEEOZGx6rniZ1Gk92RdFA3kzBSgKbYFAmh9MNQACgkQFA3kzBSg
KbboZxAAixMmMmXgOzNcKvrbPVXE2AJt4i5ULGr2daQ1Gx5SYHEn1tllxZYtcXJu
wl5YLNxZabi1WxirZChcvpr81j0KCj1+UqE3XnCLAlJvwDaDiIHa3+hKV91TkMuX
168LYLOVLwfm5P+BAkH/hwU1Mpk63+0hkXzu5sW2wundGABsqr3VO8WuFT6ZKteO
l7wlfl7jjGAivz0V0OPCOzp8Vfn2xeC2ueS3e0WGNXKdJPt6WH+AqlwHid9fokac
b0QgbKNZAC5C6ap73pptkcGZyMW+jkzayfX8ZYAZpd+7U6eOy/OMw2heoLFcyQfw
m4Ua62KDupf2EAgDQNE/ZHMOspY1QiElffoHUmmZUZUscMiat83+C4FeYAzjIdVL
zSf726yAgitbjssSB52PdTlM8XLm/iHTt2koAOcht3o5n54h6fI02c03pcRNqMka
dQsXYZDgY/7aPvCgKrThg/Ircnry7KJXXEVGY8nRzbZNzkskxxIq71iaIGipRfrh
k9VMrZL0KActQAKAClNQ17f8Ova0IDz01QKUWIzh1M7J0RGUjX/XvCK9S4tOn2x4
qNC798PX46vJ4ish2UyVOesH98p8WMsxi04IHle+fkZ6sWuhUbYmAf94DPPjlBe5
k3pqeoYnm0TYtEdcG5SYk3HhAbZgZtn7l3d5gGLP+xBk9dq/rTI=
=iAV9
-----END PGP SIGNATURE-----
Merge tag 'i2c-for-6.16-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux
Pull i2c fixes from Wolfram Sang:
"omap:
- add missing error check
- fix PM disable in probe error path
stm32:
- unmap DMA buffer on transfer failure
- use correct device when mapping and unmapping during transfers"
* tag 'i2c-for-6.16-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
i2c: stm32f7: unmap DMA mapped buffer
i2c: stm32: fix the device used for the DMA map
i2c: omap: Fix an error handling path in omap_i2c_probe()
i2c: omap: Handle omap_i2c_init() errors in omap_i2c_probe()
in __sev_es_nmi_complete() despite the function being annotated with
'noinstr'. As all functions in that source file are noinstr, exclude the
whole file from KCSAN in the Makefile to cure it.
-----BEGIN PGP SIGNATURE-----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=zL4b
-----END PGP SIGNATURE-----
Merge tag 'x86-urgent-2025-07-20' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 bug fix from Thomas Gleixner:
"A single fix for a GCC wreckage, which emits a KCSAN instrumentation
call in __sev_es_nmi_complete() despite the function being annotated
with 'noinstr'.
As all functions in that source file are noinstr, exclude the whole
file from KCSAN in the Makefile to cure it"
* tag 'x86-urgent-2025-07-20' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/sev: Work around broken noinstr on GCC
correctly on 64-bit kernels. sys_futex_wait() expects a struct
__kernel_timespec for the timeout, but the selftest uses struct timespec,
which is the original 32-bit non 2038 compliant variant. Fix it up by
converting the callsite supplied timespec to a __kernel_timespec and hand
that into the syscall.
-----BEGIN PGP SIGNATURE-----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=zIcB
-----END PGP SIGNATURE-----
Merge tag 'locking-urgent-2025-07-20' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull locking fix from Thomas Gleixner:
"A single fix for the futex selftest code to make 32-bit user space
work correctly on 64-bit kernels.
sys_futex_wait() expects a struct __kernel_timespec for the timeout,
but the selftest uses struct timespec, which is the original 32-bit
non 2038 compliant variant.
Fix it up by converting the callsite supplied timespec to a
__kernel_timespec and hand that into the syscall"
* tag 'locking-urgent-2025-07-20' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
selftests/futex: Convert 32-bit timespec to 64-bit version for 32-bit compatibility mode
counter nr_uninterruptible to an unsigned int. Due to the fact that the
counters are not updated on migration of a uninterruptble task to a
different CPU, these counters can exceed INT_MAX. The counter is cast to
long in the load average calculation, which means that the cast expands
into negative space resulting in bogus load average values. Convert it back
to unsigned long to fix this.
-----BEGIN PGP SIGNATURE-----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=Aqcr
-----END PGP SIGNATURE-----
Merge tag 'sched-urgent-2025-07-20' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler fix from Thomas Gleixner:
"A single fix for the scheduler.
A recent commit changed the runqueue counter nr_uninterruptible to an
unsigned int. Due to the fact that the counters are not updated on
migration of a uninterruptble task to a different CPU, these counters
can exceed INT_MAX.
The counter is cast to long in the load average calculation, which
means that the cast expands into negative space resulting in bogus
load average values.
Convert it back to unsigned long to fix this.
* tag 'sched-urgent-2025-07-20' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
sched: Change nr_uninterruptible type to unsigned long
-----BEGIN PGP SIGNATURE-----
iQFHBAABCgAxFiEEIbPD0id6easf0xsudhRwX5BBoF4FAmh6uxMTHHdlaS5saXVA
a2VybmVsLm9yZwAKCRB2FHBfkEGgXsDqB/9EZrNSmMhoctjhBwrEjilRPaBHaD0f
7AGbdvs78sZDC2FMQeeqVeUDgv7nhZoT9B/cjSNkAXF8LdtEXOpiYY0sqG+fO8c9
2DHBLBBGbFg+/SI+2SLzgrg8ixplnEF2HPR3pIgpmvqOKJcBd6+LnlyXs3xuBhc/
XCerEwjHDpC27YQf3ZFvgomH1rw4w0yENZaz/ztpca41GScmbBq6K9c0SAzherBJ
IDcbSUHNkT9LoFdXG9gawwX++XrBsfsKwlfAX6lYuzj+rdY5uxJaqMBg5sIA5Huh
aRLB9gXHQVABTqp73kG76ZtBdmMsd2S1JF0YdRxdsL91MQ1C0n7AW9iK
=0Qh6
-----END PGP SIGNATURE-----
Merge tag 'hyperv-fixes-signed-20250718' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux
Pull hyperv fixes from Wei Liu:
- Select use CONFIG_SYSFB only if EFI is enabled (Michael Kelley)
- An assorted set of fixes to remove warnings for missing export.h
header inclusion (Naman Jain)
- An assorted set of fixes for when Linux run as the root partition
for Microsoft Hypervisor (Mukesh Rathor, Nuno Das Neves, Stanislav
Kinsburskii)
- Fix the check for HYPERVISOR_CALLBACK_VECTOR (Naman Jain)
- Fix fcopy tool to handle irregularities with size of ring buffer
(Naman Jain)
- Fix incorrect file path conversion in fcopy tool (Yasumasa Suenaga)
* tag 'hyperv-fixes-signed-20250718' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux:
tools/hv: fcopy: Fix irregularities with size of ring buffer
PCI: hv: Use the correct hypercall for unmasking interrupts on nested
x86/hyperv: Expose hv_map_msi_interrupt()
Drivers: hv: Use nested hypercall for post message and signal event
x86/hyperv: Clean up hv_map/unmap_interrupt() return values
x86/hyperv: Fix usage of cpu_online_mask to get valid cpu
PCI: hv: Don't load the driver for baremetal root partition
net: mana: Fix warnings for missing export.h header inclusion
PCI: hv: Fix warnings for missing export.h header inclusion
clocksource: hyper-v: Fix warnings for missing export.h header inclusion
x86/hyperv: Fix warnings for missing export.h header inclusion
Drivers: hv: Fix warnings for missing export.h header inclusion
Drivers: hv: Fix the check for HYPERVISOR_CALLBACK_VECTOR
tools/hv: fcopy: Fix incorrect file path conversion
Drivers: hv: Select CONFIG_SYSFB only if EFI is enabled
Here are some USB and Thunderbolt driver fixes for reported problems for
6.16-rc6. Included in here are:
- Thunderbolt fixes for some much-reported issues
- dwc2 driver fixes
- dwc3 driver fixes
- new usb-serial driver device ids
- gadgetfs configfs fix
- musb driver fix
- USB hub driver fix
All of these have been in linux-next for a while with no reported
problems.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCaHzIcQ8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ymOLwCgjIvqamsd5wUy+hM1O9172VI1JcMAn1c9p7bX
HEWrRaqCJrrM0u3g195m
=brtL
-----END PGP SIGNATURE-----
Merge tag 'usb-6.16-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB / Thunderbolt fixes from Greg KH:
"Here are some USB and Thunderbolt driver fixes for reported problems
for 6.16-rc6. Included in here are:
- Thunderbolt fixes for some much-reported issues
- dwc2 driver fixes
- dwc3 driver fixes
- new usb-serial driver device ids
- gadgetfs configfs fix
- musb driver fix
- USB hub driver fix
All of these have been in linux-next for a while with no reported
problems"
* tag 'usb-6.16-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
usb: hub: Don't try to recover devices lost during warm reset.
usb: dwc2: gadget: Fix enter to hibernation for UTMI+ PHY
usb: dwc3: qcom: Don't leave BCR asserted
USB: serial: option: add Telit Cinterion FE910C04 (ECM) composition
USB: serial: ftdi_sio: add support for NDI EMGUIDE GEMINI
usb: gadget: configfs: Fix OOB read on empty string write
usb: musb: fix gadget state on disconnect
USB: serial: option: add Foxconn T99W640
thunderbolt: Fix bit masking in tb_dp_port_set_hops()
thunderbolt: Fix wake on connect at runtime
Here are two serial driver fixes for 6.16-rc6 that do:
- fix for the serial core OF resource leak
- pch_uart driver fix for a "incorrect variable" issue
Both of these have been in linux-next for over a week with no reported
problems.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCaHzH1g8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ykTAACfVcRCjjcynAmZ+Fxk96G08ULJKxQAoJfw7Xm6
3IStZZ/J8l7iOzHs/MfL
=LK6C
-----END PGP SIGNATURE-----
Merge tag 'tty-6.16-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Pull serial driver fixes from Greg KH:
"Here are two serial driver fixes for 6.16-rc6 that do:
- fix for the serial core OF resource leak
- pch_uart driver fix for a "incorrect variable" issue
Both of these have been in linux-next for over a week with no reported
problems"
* tag 'tty-6.16-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
pch_uart: Fix dma_sync_sg_for_device() nents value
serial: core: fix OF node leak
Here are some small driver fixes for the vchiq_arm staging driver:
- reverts of previous changes that turned out to caused problems.
- change to prevent a research leak
All of these have been in linux-next this week with no reported
problems.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCaHzHKw8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ymrxgCeLpzzCQSZ5NQCUEEfSKuRGJaVoJoAn0lyY7bm
YK29QmrdA96E+h4v4W2f
=iSQD
-----END PGP SIGNATURE-----
Merge tag 'staging-6.16-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging
Pull staging driver fixes from Greg KH:
"Here are some small driver fixes for the vchiq_arm staging driver:
- reverts of previous changes that turned out to caused problems.
- change to prevent a resource leak
All of these have been in linux-next this week with no reported
problems"
* tag 'staging-6.16-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
staging: vchiq_arm: Make vchiq_shutdown never fail
Revert "staging: vchiq_arm: Create keep-alive thread during probe"
Revert "staging: vchiq_arm: Improve initial VCHIQ connect"
Here are some char/misc/iio and other driver fixes for 6.16-rc7.
Included in here are:
- IIO driver fixes for reported problems
- Interconnect driver fixes for reported problems
- nvmem driver fixes
- bunch of comedi driver fixes for long-term bugs
- Kconfig dependancy fixes for mux drivers
- other small driver fixes for reported problems.
All of these have been in linux-next for a while with no reported
problems.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCaHzF6Q8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ym+fACfeLnxF0znIjZqK3G56KF11jN89ugAnjUN8Hs2
yK6Meq35ID98D6nuazES
=NQ9W
-----END PGP SIGNATURE-----
Merge tag 'char-misc-6.16-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char / misc / IIO fixes from Greg KH:
"Here are some char/misc/iio and other driver fixes for 6.16-rc7.
Included in here are:
- IIO driver fixes for reported problems
- Interconnect driver fixes for reported problems
- nvmem driver fixes
- bunch of comedi driver fixes for long-term bugs
- Kconfig dependancy fixes for mux drivers
- other small driver fixes for reported problems.
All of these have been in linux-next for a while with no reported
problems"
* tag 'char-misc-6.16-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (35 commits)
nvmem: layouts: u-boot-env: remove crc32 endianness conversion
misc: amd-sbi: Explicitly clear in/out arg "mb_in_out"
misc: amd-sbi: Address copy_to/from_user() warning reported in smatch
misc: amd-sbi: Address potential integer overflow issue reported in smatch
comedi: comedi_test: Fix possible deletion of uninitialized timers
comedi: Fix initialization of data for instructions that write to subdevice
comedi: Fix use of uninitialized data in insn_rw_emulate_bits()
comedi: das6402: Fix bit shift out of bounds
comedi: aio_iiro_16: Fix bit shift out of bounds
comedi: pcl812: Fix bit shift out of bounds
comedi: das16m1: Fix bit shift out of bounds
comedi: Fix some signed shift left operations
comedi: Fail COMEDI_INSNLIST ioctl if n_insns is too large
nvmem: imx-ocotp: fix MAC address byte length
MAINTAINERS: add miscdevice Rust abstractions
mux: mmio: Fix missing CONFIG_REGMAP_MMIO
iio: dac: ad3530r: Fix incorrect masking for channels 4-7 in powerdown mode
iio: adc: ad7380: fix adi,gain-milli property parsing
iio: adc: ad7949: use spi_is_bpw_supported()
iio: accel: fxls8962af: Fix use after free in fxls8962af_fifo_flush
...
A fix adding missing validation that 8 bit I/O mode is actually
supported for the specific device when attempting to use it. Anything
that runs into this should already have been having problems, enforcing
this should just make things safer and more obvious.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmh8+nwACgkQJNaLcl1U
h9AU4wf8C+H2lO/amMg5UnmWiZeGWznY6UZw2s6TWfj6ogOoxFCauun1pqXI25Lf
MmpvD0iVEbHm7yhFJZcfxsQt8mksmrvwfTSrPwA3fruT2opuGe817XuMGqciMhV2
8oVFbiEcGqgeSCPi8r903ZSDIOWvkU43Z36u25I3sILBVGnd1OnWfDDlNZx1yr/2
UZ9roh5Hz3t28hejlwjyJDhqNA7NAEsoby07w+BG+1snH2XfhOimsI/wgamRsga9
9z8DC/S70iZkWWpPLk0QpUQTXJJ9e3h8QIfBLjYilVfUpbpKD0v43G58hFN4XQA1
60ww1oH+t4j01rSdHSn/vzfSysPAuA==
=ygcZ
-----END PGP SIGNATURE-----
Merge tag 'spi-fix-v6.16-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi
Pull spi fix from Mark Brown:
"A fix adding missing validation that 8 bit I/O mode is actually
supported for the specific device when attempting to use it.
Anything that runs into this should already have been having problems,
enforcing this should just make things safer and more obvious"
* tag 'spi-fix-v6.16-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
spi: Add check for 8-bit transfer with 8 IO mode support
A fix for a memory leak when we get an error during regmap init for a
bus that uses free_on_exit to clean up device specific data.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmh8+e8ACgkQJNaLcl1U
h9BoEgf/f3xq1/K5IpXY94py7SYp/B0BqW34MioS6pmcqm9b9K4HPislBYRpjs9X
pufXp3T9f4iqWoemLEky+Z3y6Z+C75IeOoav/OmpBEOOEBXIxHnxoXS+Yl6SWxU+
0rgbk2HJLYaozYBOn8iHE1ODeEitRsFTHoOT8bX14YVj8vbWSUdXFASdOmENi4Vp
q9MfEpT1eN0BnBMIBBN1QiizQuvYtr5nHLdmvQMjUgByq8q+kRsjdnVoIOFRqEAr
BIfwqqne+hVG7S03NEMIVIS1t2tYepKKyaHcjrO7qwEwU6i9rfg/VmWuOSfZZIns
2OmBRHCgySv3Zc4rtTVcpxFmLW+TTA==
=f82u
-----END PGP SIGNATURE-----
Merge tag 'regmap-fix-v6.16-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap
Pull regmap fix from Mark Brown:
"A fix for a memory leak when we get an error during regmap init for a
bus that uses free_on_exit to clean up device specific data"
* tag 'regmap-fix-v6.16-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap:
regmap: fix potential memory leak of regmap_bus
- just a small fixup to xpad driver correcting recent addition of Acer
NGR200 controller
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQST2eWILY88ieB2DOtAj56VGEWXnAUCaHx8kAAKCRBAj56VGEWX
nKUdAP0SiCkxOSiXNRc7Z8dhw+brN2iMxO4KUeapXhSqUCA5ngEAwstQ74tFqcki
ymEo2Nw3NI77Fk4IzSioBzJVXr4/agY=
=B+ny
-----END PGP SIGNATURE-----
Merge tag 'input-for-v6.16-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
Pull input fix from Dmitry Torokhov:
- just a small fixup to the xpad driver correcting the recent addition
of the Acer NGR200 controller
* tag 'input-for-v6.16-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
Input: xpad - set correct controller type for Acer NGR200
The controller should have been set as XTYPE_XBOX360 and not XTYPE_XBOX.
Also the entry is in the wrong place. Fix it.
Reported-by: Vicki Pfau <vi@endrift.com>
Signed-off-by: Nilton Perim Neto <niltonperimneto@gmail.com>
Link: https://lore.kernel.org/r/20250708033126.26216-2-niltonperimneto@gmail.com
Fixes: 22c69d786e ("Input: xpad - support Acer NGR 200 Controller")
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
When a module is loaded, it adds trace events defined by the module. It
may also need to modify the modules trace printk formats to replace enum
names with their values.
If two modules are loaded at the same time, the adding of the event to the
ftrace_events list can corrupt the walking of the list in the code that is
modifying the printk format strings and crash the kernel.
The addition of the event should take the trace_event_sem for write while
it adds the new event.
Also add a lockdep_assert_held() on that semaphore in
__trace_add_event_dirs() as it iterates the list.
Cc: stable@vger.kernel.org
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Link: https://lore.kernel.org/20250718223158.799bfc0c@batman.local.home
Reported-by: Fusheng Huang(黄富生) <Fusheng.Huang@luxshare-ict.com>
Closes: https://lore.kernel.org/all/20250717105007.46ccd18f@batman.local.home/
Fixes: 110bf2b764 ("tracing: add protection around module events unload")
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
- Fix handling of migration disabled tasks in default idle selection.
- update_locked_rq() called __this_cpu_write() spuriously with NULL when @rq
was not locked. As the writes were spurious, it didn't break anything
directly. However, the function could be called in a preemptible leading
to a context warning in __this_cpu_write(). Skip the spurious NULL writes.
- Selftest fix on UP.
-----BEGIN PGP SIGNATURE-----
iIQEABYKACwWIQTfIjM1kS57o3GsC/uxYfJx3gVYGQUCaHvPZw4cdGpAa2VybmVs
Lm9yZwAKCRCxYfJx3gVYGabMAP4jSAr4gYWEBOUaD9btwnPxZwlSiAEQtqBDBVRb
/UunFAD/WBwUPk/u7BchLHjuH3sYW5gQb40kbtUnmNvB+RNUUgc=
=3WAD
-----END PGP SIGNATURE-----
Merge tag 'sched_ext-for-6.16-rc6-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/sched_ext
Pull sched_ext fixes from Tejun Heo:
- Fix handling of migration disabled tasks in default idle selection
- update_locked_rq() called __this_cpu_write() spuriously with NULL
when @rq was not locked. As the writes were spurious, it didn't break
anything directly. However, the function could be called in a
preemptible leading to a context warning in __this_cpu_write(). Skip
the spurious NULL writes.
- Selftest fix on UP
* tag 'sched_ext-for-6.16-rc6-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/sched_ext:
sched_ext: idle: Handle migration-disabled tasks in idle selection
sched/ext: Prevent update_locked_rq() calls with NULL rq
selftests/sched_ext: Fix exit selftest hang on UP
An earlier commit to suppress a warning introduced a race condition where
tasks can escape cgroup1 freezer. Revert the commit and simply remove the
warning which was spurious to begin with.
-----BEGIN PGP SIGNATURE-----
iIQEABYKACwWIQTfIjM1kS57o3GsC/uxYfJx3gVYGQUCaHvMvw4cdGpAa2VybmVs
Lm9yZwAKCRCxYfJx3gVYGadfAP0cT4QXwtw0VXyiNr5PMqxQ74rYsngJ+NevRbod
fK6hIwD/T+owQc/ivYp5/N/XUgpT+Ixp7YRj2RIzQbL6SPjzOwE=
=IlrN
-----END PGP SIGNATURE-----
Merge tag 'cgroup-for-6.16-rc6-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup
Pull cgroup fixes from Tejun Heo:
"An earlier commit to suppress a warning introduced a race condition
where tasks can escape cgroup1 freezer. Revert the commit and simply
remove the warning which was spurious to begin with"
* tag 'cgroup-for-6.16-rc6-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup:
Revert "cgroup_freezer: cgroup_freezing: Check if not frozen"
sched,freezer: Remove unnecessary warning in __thaw_task
- corsair-cpro: Validate the size of the received input buffer
- ina238: Report energy in microjoules as expected by the ABI
- pmbus/ucd9000: Fixed GPIO functionality
-----BEGIN PGP SIGNATURE-----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=Ii5g
-----END PGP SIGNATURE-----
Merge tag 'hwmon-for-v6.16-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging
Pull hwmon fixes from Guenter Roeck:
- corsair-cpro: Validate the size of the received input buffer
- ina238: Report energy in microjoules as expected by the ABI
- pmbus/ucd9000: Fixed GPIO functionality
* tag 'hwmon-for-v6.16-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging:
hwmon: (pmbus/ucd9000) Fix error in ucd9000_gpio_set
hwmon: (ina238) Report energy in microjoules
hwmon: (corsair-cpro) Validate the size of the received input buffer
Toolchain and infrastructure:
- Fix build and modpost confusion for the upcoming Rust 1.89.0 release.
- Clean objtool warning for the upcoming Rust 1.89.0 release by adding
one more noreturn function.
'kernel' crate:
- Fix build error when using generics in the 'try_{,pin_}init!' macros.
-----BEGIN PGP SIGNATURE-----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=mz3t
-----END PGP SIGNATURE-----
Merge tag 'rust-fixes-6.16-2' of git://git.kernel.org/pub/scm/linux/kernel/git/ojeda/linux
Pull Rust fixes from Miguel Ojeda:
"Toolchain and infrastructure:
- Fix build and modpost confusion for the upcoming Rust 1.89.0
release
- Clean objtool warning for the upcoming Rust 1.89.0 release by
adding one more noreturn function
'kernel' crate:
- Fix build error when using generics in the 'try_{,pin_}init!'
macros"
* tag 'rust-fixes-6.16-2' of git://git.kernel.org/pub/scm/linux/kernel/git/ojeda/linux:
rust: use `#[used(compiler)]` to fix build and `modpost` with Rust >= 1.89.0
objtool/rust: add one more `noreturn` Rust function for Rust 1.89.0
rust: init: Fix generics in *_init! macros
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRAhzRXHqcMeLMyaSiRxhvAZXjcogUCaHt3nAAKCRCRxhvAZXjc
ojOmAP9nBSXSP2YvyUWPuKJc/wra27gRSEOQjXQS4j0ay6xLbAD/bO3AKMOWAUya
EnUzZDe29z7TbnGW1PlE93cX9oXWjQc=
=Gt4r
-----END PGP SIGNATURE-----
Merge tag 'vfs-6.16-rc7.fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull vfs fixes from Christian Brauner:
- Fix a memory leak in fcntl_dirnotify()
- Raise SB_I_NOEXEC on secrement superblock instead of messing with
flags on the mount
- Add fsdevel and block mailing lists to uio entry. We had a few
instances were very questionable stuff was added without either block
or the VFS being aware of it
- Fix netfs copy-to-cache so that it performs collection with
ceph+fscache
- Fix netfs race between cache write completion and ALL_QUEUED being
set
- Verify the inode mode when loading entries from disk in isofs
- Avoid state_lock in iomap_set_range_uptodate()
- Fix PIDFD_INFO_COREDUMP check in PIDFD_GET_INFO ioctl
- Fix the incorrect return value in __cachefiles_write()
* tag 'vfs-6.16-rc7.fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
MAINTAINERS: add block and fsdevel lists to iov_iter
netfs: Fix race between cache write completion and ALL_QUEUED being set
netfs: Fix copy-to-cache so that it performs collection with ceph+fscache
fix a leak in fcntl_dirnotify()
iomap: avoid unnecessary ifs_set_range_uptodate() with locks
isofs: Verify inode mode when loading from disk
cachefiles: Fix the incorrect return value in __cachefiles_write()
secretmem: use SB_I_NOEXEC
coredump: fix PIDFD_INFO_COREDUMP ioctl check
-----BEGIN PGP SIGNATURE-----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=IWDL
-----END PGP SIGNATURE-----
Merge tag 'v6.16-rc6-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6
Pull smb client fixes from Steve French:
- fix creating special files to Samba when using SMB3.1.1 POSIX
Extensions
- fix incorrect caching on new file creation with directory leases
enabled
- two use after free fixes: one in oplock_break and one in async
decryption
* tag 'v6.16-rc6-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6:
Fix SMB311 posix special file creation to servers which do not advertise reparse support
smb: invalidate and close cached directory when creating child entries
smb: client: fix use-after-free in crypt_message when using async crypto
smb: client: fix use-after-free in cifs_oplock_break
* Three fixes for unnecessary spew: an ACPI CPPC boot-time debug
message, the link-time warnings for R_RISCV_NONE in binaries, and some
compile-time warnings in __put_user_nocheck.
* A fix for a race during text patching.
* Interrupts are no longer disabled during exception handling.
* A fix for a missing sign extension in the misaligned load handler.
* A fix to avoid static ftrace being selected in Kconfig, as we have
moved to dynamic ftrace.
-----BEGIN PGP SIGNATURE-----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=2jFG
-----END PGP SIGNATURE-----
Merge tag 'riscv-for-linus-6.16-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull RISC-V fixes from Palmer Dabbelt:
- Three fixes for unnecessary spew: an ACPI CPPC boot-time debug
message, the link-time warnings for R_RISCV_NONE in binaries, and
some compile-time warnings in __put_user_nocheck
- A fix for a race during text patching
- Interrupts are no longer disabled during exception handling
- A fix for a missing sign extension in the misaligned load handler
- A fix to avoid static ftrace being selected in Kconfig, as we have
moved to dynamic ftrace
* tag 'riscv-for-linus-6.16-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
riscv: uaccess: Fix -Wuninitialized and -Wshadow in __put_user_nocheck
riscv: Stop supporting static ftrace
riscv: traps_misaligned: properly sign extend value in misaligned load handler
riscv: Enable interrupt during exception handling
riscv: ftrace: Properly acquire text_mutex to fix a race condition
ACPI: RISC-V: Remove unnecessary CPPC debug message
riscv: Stop considering R_RISCV_NONE as bad relocations
