[ Upstream commit bf8d87c076 ]
Fix a misused goto label jump since that can result in a memory leak.
Link: https://lore.kernel.org/r/17e7b9b9ee6.c6d9c6a02564.4545388417402742326@zohomail.com
Signed-off-by: Li Chen <lchen@ambarella.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Acked-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7c492a2530 ]
If the flow control settings have been changed, a subsequent FW reset
may cause the ethernet link to toggle unnecessarily. This link toggle
will increase the down time by a few seconds.
The problem is caused by bnxt_update_phy_setting() detecting a false
mismatch in the flow control settings between the stored software
settings and the current FW settings after the FW reset. This mismatch
is caused by the AUTONEG bit added to link_info->req_flow_ctrl in an
inconsistent way in bnxt_set_pauseparam() in autoneg mode. The AUTONEG
bit should not be added to link_info->req_flow_ctrl.
Reviewed-by: Colin Winegarden <colin.winegarden@broadcom.com>
Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9b392e0e0b ]
This fixes attemting to print hdev->name directly which causes them to
print an error:
kernel: read_version:367: (efault): sock 000000006a3008f2
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a02192151b ]
Assign rtnl_link_ops->get_link_net() callback so that IFLA_LINK_NETNSID is
added to rtnetlink messages. This fixes iproute2 which otherwise resolved
the link interface to an interface in the wrong namespace.
Test commands:
ip netns add nst
ip link add dummy0 type dummy
ip link add link macvtap0 link dummy0 type macvtap
ip link set macvtap0 netns nst
ip -netns nst link show macvtap0
Before:
10: macvtap0@gre0: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN mode DEFAULT group default qlen 500
link/ether 5e:8f:ae:1d:60:50 brd ff:ff:ff:ff:ff:ff
After:
10: macvtap0@if2: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN mode DEFAULT group default qlen 500
link/ether 5e:8f:ae:1d:60:50 brd ff:ff:ff:ff:ff:ff link-netnsid 0
Reported-by: Leonardo Mörlein <freifunk@irrelefant.net>
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Link: https://lore.kernel.org/r/20220228003240.1337426-1-sven@narfation.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6bf536eb5c ]
rmbe_update_limit is used to limit announcing receive
window updating too frequently. RFC7609 request a minimal
increase in the window size of 10% of the receive buffer
space. But current implementation used:
min_t(int, rmbe_size / 10, SOCK_MIN_SNDBUF / 2)
and SOCK_MIN_SNDBUF / 2 == 2304 Bytes, which is almost
always less then 10% of the receive buffer space.
This causes the receiver always sending CDC message to
update its consumer cursor when it consumes more then 2K
of data. And as a result, we may encounter something like
"TCP silly window syndrome" when sending 2.5~8K message.
This patch fixes this using max(rmbe_size / 10, SOCK_MIN_SNDBUF / 2).
With this patch and SMC autocorking enabled, qperf 2K/4K/8K
tcp_bw test shows 45%/75%/40% increase in throughput respectively.
Signed-off-by: Dust Li <dust.li@linux.alibaba.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 554fb72ee3 ]
If the driver probe fails to request the channel IRQ or fatal IRQ, the
driver will free the IRQ vectors before freeing the IRQs in free_irq(),
and this will cause a kernel BUG like this:
------------[ cut here ]------------
kernel BUG at drivers/pci/msi.c:369!
Internal error: Oops - BUG: 0 [#1] PREEMPT SMP
Call trace:
free_msi_irqs+0x118/0x13c
pci_disable_msi+0xfc/0x120
pci_free_irq_vectors+0x24/0x3c
hisi_sas_v3_probe+0x360/0x9d0 [hisi_sas_v3_hw]
local_pci_probe+0x44/0xb0
work_for_cpu_fn+0x20/0x34
process_one_work+0x1d0/0x340
worker_thread+0x2e0/0x460
kthread+0x180/0x190
ret_from_fork+0x10/0x20
---[ end trace b88990335b610c11 ]---
So we use devm_add_action() to control the order in which we free the
vectors.
Link: https://lore.kernel.org/r/1645703489-87194-4-git-send-email-john.garry@huawei.com
Signed-off-by: Qi Liu <liuqi115@huawei.com>
Signed-off-by: John Garry <john.garry@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit cc8294ec47 ]
__setup() handlers should return 1 if the command line option is handled
and 0 if not (or maybe never return 0; doing so just pollutes init's
environment with strings that are not init arguments/parameters).
Return 1 from aha152x_setup() to indicate that the boot option has been
handled.
Link: lore.kernel.org/r/64644a2f-4a20-bab3-1e15-3b2cdd0defe3@omprussia.ru
Link: https://lore.kernel.org/r/20220223000623.5920-1-rdunlap@infradead.org
Cc: "Juergen E. Fischer" <fischer@norbit.de>
Cc: "James E.J. Bottomley" <jejb@linux.ibm.com>
Cc: "Martin K. Petersen" <martin.petersen@oracle.com>
Reported-by: Igor Zhbanov <i.zhbanov@omprussia.ru>
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f792a3629f ]
In pm8001_chip_fw_flash_update_build(), if
pm8001_chip_fw_flash_update_build() fails, the struct fw_control_ex
allocated must be freed.
Link: https://lore.kernel.org/r/20220220031810.738362-23-damien.lemoal@opensource.wdc.com
Reviewed-by: Jack Wang <jinpu.wang@ionos.com>
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4c8f04b190 ]
In pm8001_chip_set_dev_state_req(), pm8001_chip_fw_flash_update_req(),
pm80xx_chip_phy_ctl_req() and pm8001_chip_reg_dev_req() add missing calls
to pm8001_tag_free() to free the allocated tag when pm8001_mpi_build_cmd()
fails.
Similarly, in pm8001_exec_internal_task_abort(), if the chip ->task_abort
method fails, the tag allocated for the abort request task must be
freed. Add the missing call to pm8001_tag_free().
Link: https://lore.kernel.org/r/20220220031810.738362-22-damien.lemoal@opensource.wdc.com
Reviewed-by: John Garry <john.garry@huawei.com>
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f90a74892f ]
In pm8001_send_abort_all(), make sure to free the allocated sas task
if pm8001_tag_alloc() or pm8001_mpi_build_cmd() fail.
Link: https://lore.kernel.org/r/20220220031810.738362-21-damien.lemoal@opensource.wdc.com
Reviewed-by: John Garry <john.garry@huawei.com>
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7e6b7e740a ]
The call to pm8001_ccb_task_free() at the end of
pm8001_mpi_task_abort_resp() already frees the ccb tag. So when the device
NCQ_ABORT_ALL_FLAG is set, the tag should not be freed again. Also change
the hardcoded 0xBFFFFFFF value to ~NCQ_ABORT_ALL_FLAG as it ought to be.
Link: https://lore.kernel.org/r/20220220031810.738362-19-damien.lemoal@opensource.wdc.com
Reviewed-by: Jack Wang <jinpu.wang@ionos.com>
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3762d8f6ed ]
The declaration of the local variable destination1 in pm80xx_pci_mem_copy()
as a pointer to a u32 results in the sparse warning:
warning: incorrect type in assignment (different base types)
expected unsigned int [usertype]
got restricted __le32 [usertype]
Furthermore, the destination" argument of pm80xx_pci_mem_copy() is wrongly
declared with the const attribute.
Fix both problems by changing the type of the "destination" argument to
"__le32 *" and use this argument directly inside the pm80xx_pci_mem_copy()
function, thus removing the need for the destination1 local variable.
Link: https://lore.kernel.org/r/20220220031810.738362-6-damien.lemoal@opensource.wdc.com
Reviewed-by: Jack Wang <jinpu.wang@ionos.com>
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9dff13f9ed ]
The driver has a fallback so make the message informational
rather than a warning. The driver has a fallback if the
Component Resource Association Table (CRAT) is missing, so
make this informational now.
Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1906
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit fa247089de ]
Update both bio-based and request-based DM to requeue IO if the
mapping table not available.
This race of IO being submitted before the DM device ready is so
narrow, yet possible for initial table load given that the DM device's
request_queue is created prior, that it best to requeue IO to handle
this unlikely case.
Reported-by: Zhang Yi <yi.zhang@huawei.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit cd9c88da17 ]
It appears like cmd could be a Spectre v1 gadget as it's supplied by a
user and used as an array index. Prevent the contents of kernel memory
from being leaked to userspace via speculative execution by using
array_index_nospec.
Signed-off-by: Jordy Zomer <jordy@pwning.systems>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0c51e12e21 ]
In case user space sends a packet destined to a broadcast address when a
matching broadcast route is not configured, the kernel will create a
unicast neighbour entry that will never be resolved [1].
When the broadcast route is configured, the unicast neighbour entry will
not be invalidated and continue to linger, resulting in packets being
dropped.
Solve this by invalidating unresolved neighbour entries for broadcast
addresses after routes for these addresses are internally configured by
the kernel. This allows the kernel to create a broadcast neighbour entry
following the next route lookup.
Another possible solution that is more generic but also more complex is
to have the ARP code register a listener to the FIB notification chain
and invalidate matching neighbour entries upon the addition of broadcast
routes.
It is also possible to wave off the issue as a user space problem, but
it seems a bit excessive to expect user space to be that intimately
familiar with the inner workings of the FIB/neighbour kernel code.
[1] https://lore.kernel.org/netdev/55a04a8f-56f3-f73c-2aea-2195923f09d1@huawei.com/
Reported-by: Wang Hai <wanghai38@huawei.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Tested-by: Wang Hai <wanghai38@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d8d4dd26b9 ]
Currently, fragmented EBS was set for a channel only if the 'hb_type'
was set to fragmented or balanced scan. However, 'hb_type' is set only
in case of CDB, and thus fragmented EBS is never set for a channel for
non-CDB devices. Fix it.
Signed-off-by: Ilan Peer <ilan.peer@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20220204122220.a6165ac9b9d5.I654eafa62fd647030ae6d4f07f32c96c3171decb@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5ac121b81b ]
The AXP288's recommended and factory default Vhold value (minimum
input voltage below which the input current draw will be reduced)
is 4.4V. This lines up with other charger IC's such as the TI
bq2419x/bq2429x series which use 4.36V or 4.44V.
For some reason some BIOS-es initialize Vhold to 4.6V or even 4.7V
which combined with the typical voltage drop over typically low
wire gauge micro-USB cables leads to the input-current getting
capped below 1A (with a 2A capable dedicated charger) based on Vhold.
This leads to slow charging, or even to the device slowly discharging
if the device is in heavy use.
As the Linux AXP288 drivers use the builtin BC1.2 charger detection
and send the input-current-limit according to the detected charger
there really is no reason not to use the recommended 4.4V Vhold.
Set Vhold to 4.4V to fix the slow charging issue on various devices.
There is one exception, the special-case of the HP X2 2-in-1s which
combine this BC1.2 capable PMIC with a Type-C port and a 5V/3A factory
provided charger with a Type-C plug which does not do BC1.2. These
have their input-current-limit hardcoded to 3A (like under Windows)
and use a higher Vhold on purpose to limit the current when used
with other chargers. To avoid touching Vhold on these HP X2 laptops
the code setting Vhold is added to an else branch of the if checking
for these models.
Note this also fixes the sofar unused VBUS_ISPOUT_VHOLD_SET_MASK
define, which was wrong.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9f72d4757c ]
The Qualcomm PCI bridge device (Device ID 0x0110) found in chipsets such as
SM8450 does not set the Command Completed bit unless writes to the Slot
Command register change "Control" bits.
This results in timeouts like below:
pcieport 0001:00:00.0: pciehp: Timeout on hotplug command 0x03c0 (issued 2020 msec ago)
Add the device to the Command Completed quirk to mark commands "completed"
immediately unless they change the "Control" bits.
Link: https://lore.kernel.org/r/20220210145003.135907-1-manivannan.sadhasivam@linaro.org
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4f9bf2a2f5 ]
Commit
9652dc2eb9 ("tcp: relax listening_hash operations")
removed the need to disable bottom half while acquiring
listening_hash.lock. There are still two callers left which disable
bottom half before the lock is acquired.
On PREEMPT_RT the softirqs are preemptible and local_bh_disable() acts
as a lock to ensure that resources, that are protected by disabling
bottom halves, remain protected.
This leads to a circular locking dependency if the lock acquired with
disabled bottom halves is also acquired with enabled bottom halves
followed by disabling bottom halves. This is the reverse locking order.
It has been observed with inet_listen_hashbucket:🔒
local_bh_disable() + spin_lock(&ilb->lock):
inet_listen()
inet_csk_listen_start()
sk->sk_prot->hash() := inet_hash()
local_bh_disable()
__inet_hash()
spin_lock(&ilb->lock);
acquire(&ilb->lock);
Reverse order: spin_lock(&ilb2->lock) + local_bh_disable():
tcp_seq_next()
listening_get_next()
spin_lock(&ilb2->lock);
acquire(&ilb2->lock);
tcp4_seq_show()
get_tcp4_sock()
sock_i_ino()
read_lock_bh(&sk->sk_callback_lock);
acquire(softirq_ctrl) // <---- whoops
acquire(&sk->sk_callback_lock)
Drop local_bh_disable() around __inet_hash() which acquires
listening_hash->lock. Split inet_unhash() and acquire the
listen_hashbucket lock without disabling bottom halves; the inet_ehash
lock with disabled bottom halves.
Reported-by: Mike Galbraith <efault@gmx.de>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Link: https://lkml.kernel.org/r/12d6f9879a97cd56c09fb53dee343cbb14f7f1f7.camel@gmx.de
Link: https://lkml.kernel.org/r/X9CheYjuXWc75Spa@hirez.programming.kicks-ass.net
Link: https://lore.kernel.org/r/YgQOebeZ10eNx1W6@linutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 30de2b541a ]
During event processing, events are read from the event queue one
by one until the queue is empty.If the master device continuously
requests address access at the same time and the SMMU generates
events, the cyclic processing of the event takes a long time and
softlockup warnings may be reported.
arm-smmu-v3 arm-smmu-v3.34.auto: event 0x0a received:
arm-smmu-v3 arm-smmu-v3.34.auto: 0x00007f220000280a
arm-smmu-v3 arm-smmu-v3.34.auto: 0x000010000000007e
arm-smmu-v3 arm-smmu-v3.34.auto: 0x00000000034e8670
watchdog: BUG: soft lockup - CPU#0 stuck for 22s! [irq/268-arm-smm:247]
Call trace:
_dev_info+0x7c/0xa0
arm_smmu_evtq_thread+0x1c0/0x230
irq_thread_fn+0x30/0x80
irq_thread+0x128/0x210
kthread+0x134/0x138
ret_from_fork+0x10/0x1c
Kernel panic - not syncing: softlockup: hung tasks
Fix this by calling cond_resched() after the event information is
printed.
Signed-off-by: Zhou Guanghui <zhouguanghui1@huawei.com>
Link: https://lore.kernel.org/r/20220119070754.26528-1-zhouguanghui1@huawei.com
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b0b0b8b897 ]
Aardvark hardware supports Multi-MSI and MSI_FLAG_MULTI_PCI_MSI is already
set for the MSI chip. But when allocating MSI interrupt numbers for
Multi-MSI, the numbers need to be properly aligned, otherwise endpoint
devices send MSI interrupt with incorrect numbers.
Fix this issue by using function bitmap_find_free_region() instead of
bitmap_find_next_zero_area().
To ensure that aligned MSI interrupt numbers are used by endpoint devices,
we cannot use Linux virtual irq numbers (as they are random and not
properly aligned). Instead we need to use the aligned hwirq numbers.
This change fixes receiving MSI interrupts on Armada 3720 boards and
allows using NVMe disks which use Multi-MSI feature with 3 interrupts.
Without this NVMe disks freeze booting as linux nvme-core.c is waiting
60s for an interrupt.
Link: https://lore.kernel.org/r/20220110015018.26359-4-kabel@kernel.org
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Marek Behún <kabel@kernel.org>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7c5ed82b80 ]
On large config LPARs (having 192 and more cores), Linux fails to boot
due to insufficient memory in the first memblock. It is due to the
memory reservation for the crash kernel which starts at 128MB offset of
the first memblock. This memory reservation for the crash kernel doesn't
leave enough space in the first memblock to accommodate other essential
system resources.
The crash kernel start address was set to 128MB offset by default to
ensure that the crash kernel get some memory below the RMA region which
is used to be of size 256MB. But given that the RMA region size can be
512MB or more, setting the crash kernel offset to mid of RMA size will
leave enough space for the kernel to allocate memory for other system
resources.
Since the above crash kernel offset change is only applicable to the LPAR
platform, the LPAR feature detection is pushed before the crash kernel
reservation. The rest of LPAR specific initialization will still
be done during pseries_probe_fw_features as usual.
This patch is dependent on changes to paca allocation for boot CPU. It
expect boot CPU to discover 1T segment support which is introduced by
the patch posted here:
https://lists.ozlabs.org/pipermail/linuxppc-dev/2022-January/239175.html
Reported-by: Abdul haleem <abdhalee@linux.vnet.ibm.com>
Signed-off-by: Sourabh Jain <sourabhjain@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220204085601.107257-1-sourabhjain@linux.ibm.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 145c7a7938 ]
This fixes minor data-races in ip6_mc_input() and
batadv_mcast_mla_rtr_flags_softif_get_ipv6()
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0908a66ad1 ]
There are cases where clang compiler is packaged in a way
readelf is a symbolic link to llvm-readelf. In such cases,
llvm-readelf will be used instead of default binutils readelf,
and the following error will appear during libbpf build:
# Warning: Num of global symbols in
# /home/yhs/work/bpf-next/tools/testing/selftests/bpf/tools/build/libbpf/sharedobjs/libbpf-in.o (367)
# does NOT match with num of versioned symbols in
# /home/yhs/work/bpf-next/tools/testing/selftests/bpf/tools/build/libbpf/libbpf.so libbpf.map (383).
# Please make sure all LIBBPF_API symbols are versioned in libbpf.map.
# --- /home/yhs/work/bpf-next/tools/testing/selftests/bpf/tools/build/libbpf/libbpf_global_syms.tmp ...
# +++ /home/yhs/work/bpf-next/tools/testing/selftests/bpf/tools/build/libbpf/libbpf_versioned_syms.tmp ...
# @@ -324,6 +324,22 @@
# btf__str_by_offset
# btf__type_by_id
# btf__type_cnt
# +LIBBPF_0.0.1
# +LIBBPF_0.0.2
# +LIBBPF_0.0.3
# +LIBBPF_0.0.4
# +LIBBPF_0.0.5
# +LIBBPF_0.0.6
# +LIBBPF_0.0.7
# +LIBBPF_0.0.8
# +LIBBPF_0.0.9
# +LIBBPF_0.1.0
# +LIBBPF_0.2.0
# +LIBBPF_0.3.0
# +LIBBPF_0.4.0
# +LIBBPF_0.5.0
# +LIBBPF_0.6.0
# +LIBBPF_0.7.0
# libbpf_attach_type_by_name
# libbpf_find_kernel_btf
# libbpf_find_vmlinux_btf_id
# make[2]: *** [Makefile:184: check_abi] Error 1
# make[1]: *** [Makefile:140: all] Error 2
The above failure is due to different printouts for some ABS
versioned symbols. For example, with the same libbpf.so,
$ /bin/readelf --dyn-syms --wide tools/lib/bpf/libbpf.so | grep "LIBBPF" | grep ABS
134: 0000000000000000 0 OBJECT GLOBAL DEFAULT ABS LIBBPF_0.5.0
202: 0000000000000000 0 OBJECT GLOBAL DEFAULT ABS LIBBPF_0.6.0
...
$ /opt/llvm/bin/readelf --dyn-syms --wide tools/lib/bpf/libbpf.so | grep "LIBBPF" | grep ABS
134: 0000000000000000 0 OBJECT GLOBAL DEFAULT ABS LIBBPF_0.5.0@@LIBBPF_0.5.0
202: 0000000000000000 0 OBJECT GLOBAL DEFAULT ABS LIBBPF_0.6.0@@LIBBPF_0.6.0
...
The binutils readelf doesn't print out the symbol LIBBPF_* version and llvm-readelf does.
Such a difference caused libbpf build failure with llvm-readelf.
The proposed fix filters out all ABS symbols as they are not part of the comparison.
This works for both binutils readelf and llvm-readelf.
Reported-by: Delyan Kratunov <delyank@fb.com>
Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20220204214355.502108-1-yhs@fb.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 5666ee154f ]
When adding 6GHz channels to scan request based on reported
co-located APs, don't add channels that have only APs with
"non-transmitted" BSSes if they only match the wildcard SSID since
they will be found by probing the "transmitted" BSS.
Signed-off-by: Avraham Stern <avraham.stern@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20220202104617.f6ddf099f934.I231e55885d3644f292d00dfe0f42653269f2559e@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d4f408cdcd ]
As stated in [1], negative current values are used for discharging
batteries.
AXP PMICs internally have two different ADC channels for shunt current
measurement: one used during charging and one during discharging.
The values reported by these ADCs are unsigned.
While the driver properly selects ADC channel to get the data from,
it doesn't apply negative sign when reporting discharging current.
[1] Documentation/ABI/testing/sysfs-class-power
Signed-off-by: Evgeny Boger <boger@wirenboard.com>
Acked-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2245ea91fd ]
coccinelle report:
./drivers/scsi/bfa/bfad_attr.c:908:8-16:
WARNING: use scnprintf or sprintf
./drivers/scsi/bfa/bfad_attr.c:860:8-16:
WARNING: use scnprintf or sprintf
./drivers/scsi/bfa/bfad_attr.c:888:8-16:
WARNING: use scnprintf or sprintf
./drivers/scsi/bfa/bfad_attr.c:853:8-16:
WARNING: use scnprintf or sprintf
./drivers/scsi/bfa/bfad_attr.c:808:8-16:
WARNING: use scnprintf or sprintf
./drivers/scsi/bfa/bfad_attr.c:728:8-16:
WARNING: use scnprintf or sprintf
./drivers/scsi/bfa/bfad_attr.c:822:8-16:
WARNING: use scnprintf or sprintf
./drivers/scsi/bfa/bfad_attr.c:927:9-17:
WARNING: use scnprintf or sprintf
./drivers/scsi/bfa/bfad_attr.c:900:8-16:
WARNING: use scnprintf or sprintf
./drivers/scsi/bfa/bfad_attr.c:874:8-16:
WARNING: use scnprintf or sprintf
./drivers/scsi/bfa/bfad_attr.c:714:8-16:
WARNING: use scnprintf or sprintf
./drivers/scsi/bfa/bfad_attr.c:839:8-16:
WARNING: use scnprintf or sprintf
Use sysfs_emit() instead of scnprintf() or sprintf().
Link: https://lore.kernel.org/r/def83ff75faec64ba592b867a8499b1367bae303.1643181468.git.yang.guang5@zte.com.cn
Reported-by: Zeal Robot <zealci@zte.com.cn>
Signed-off-by: Yang Guang <yang.guang5@zte.com.cn>
Signed-off-by: David Yang <davidcomponentone@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0ad3867b0f ]
coccinelle report:
./drivers/scsi/mvsas/mv_init.c:699:8-16:
WARNING: use scnprintf or sprintf
./drivers/scsi/mvsas/mv_init.c:747:8-16:
WARNING: use scnprintf or sprintf
Use sysfs_emit() instead of scnprintf() or sprintf().
Link: https://lore.kernel.org/r/c1711f7cf251730a8ceb5bdfc313bf85662b3395.1643182948.git.yang.guang5@zte.com.cn
Reported-by: Zeal Robot <zealci@zte.com.cn>
Signed-off-by: Yang Guang <yang.guang5@zte.com.cn>
Signed-off-by: David Yang <davidcomponentone@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4421a58271 ]
Menglong Dong reports that the documentation for the dst_port field in
struct bpf_sock is inaccurate and confusing. From the BPF program PoV, the
field is a zero-padded 16-bit integer in network byte order. The value
appears to the BPF user as if laid out in memory as so:
offsetof(struct bpf_sock, dst_port) + 0 <port MSB>
+ 8 <port LSB>
+16 0x00
+24 0x00
32-, 16-, and 8-bit wide loads from the field are all allowed, but only if
the offset into the field is 0.
32-bit wide loads from dst_port are especially confusing. The loaded value,
after converting to host byte order with bpf_ntohl(dst_port), contains the
port number in the upper 16-bits.
Remove the confusion by splitting the field into two 16-bit fields. For
backward compatibility, allow 32-bit wide loads from offsetof(struct
bpf_sock, dst_port).
While at it, allow loads 8-bit loads at offset [0] and [1] from dst_port.
Reported-by: Menglong Dong <imagedong@tencent.com>
Signed-off-by: Jakub Sitnicki <jakub@cloudflare.com>
Link: https://lore.kernel.org/r/20220130115518.213259-2-jakub@cloudflare.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 17846485df ]
T1040RDB has two RTL8211E-VB phys which requires setting
of internal delays for correct work.
Changing the phy-connection-type property to `rgmii-id`
will fix this issue.
Signed-off-by: Maxim Kiselev <bigunclemax@gmail.com>
Reviewed-by: Maxim Kochetkov <fido_max@inbox.ru>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20211230151123.1258321-1-bigunclemax@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e2cf07654e ]
coccinelle report:
./drivers/ptp/ptp_sysfs.c:17:8-16:
WARNING: use scnprintf or sprintf
./drivers/ptp/ptp_sysfs.c:390:8-16:
WARNING: use scnprintf or sprintf
Use sysfs_emit instead of scnprintf or sprintf makes more sense.
Reported-by: Zeal Robot <zealci@zte.com.cn>
Signed-off-by: Yang Guang <yang.guang5@zte.com.cn>
Signed-off-by: David Yang <davidcomponentone@gmail.com>
Acked-by: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7bd42fb95e ]
According to the Tegra Technical Reference Manual, the seq_num
field of control endpoint is not [31:24] but [31:27]. Bit 24
is reserved and bit 26 is splitxstate.
The change fixes the wrong control endpoint's definitions.
Signed-off-by: Wayne Chang <waynec@nvidia.com>
Link: https://lore.kernel.org/r/20220107091349.149798-1-waynec@nvidia.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 62fb61580e ]
According to the Tegra Technical Reference Manual, SPARAM
is a read-only register and should not be programmed in
the driver.
The change removes the wrong SPARAM usage.
Signed-off-by: Wayne Chang <waynec@nvidia.com>
Link: https://lore.kernel.org/r/20220107090443.149021-1-waynec@nvidia.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit dfced44f12 ]
This issue takes place in an error path in
amdgpu_cs_fence_to_handle_ioctl(). When `info->in.what` falls into
default case, the function simply returns -EINVAL, forgetting to
decrement the reference count of a dma_fence obj, which is bumped
earlier by amdgpu_cs_get_fence(). This may result in reference count
leaks.
Fix it by decreasing the refcount of specific object before returning
the error code.
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Xin Xiong <xiongx18@fudan.edu.cn>
Signed-off-by: Xin Tan <tanxin.ctf@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 047db281c0 ]
[Why]
For allow eDP hot-plug feature, the stream signal may change to VIRTUAL
when plug-out and back to eDP when plug-in. OS will still setPathMode
with same timing for each plugging, but eDP gets no stream update as we
don't check signal type changing back as keeping it VIRTUAL. It's also
unsafe for future cases that stream signal is switched with same timing.
[How]
Check stream signal type change include previous HDMI signal case.
Reviewed-by: Aric Cyr <Aric.Cyr@amd.com>
Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Dale Zhao <dale.zhao@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 564d4eceb9 ]
The bug was found during fuzzing. Stacktrace locates it in
ath5k_eeprom_convert_pcal_info_5111.
When none of the curve is selected in the loop, idx can go
up to AR5K_EEPROM_N_PD_CURVES. The line makes pd out of bound.
pd = &chinfo[pier].pd_curves[idx];
There are many OOB writes using pd later in the code. So I
added a sanity check for idx. Checks for other loops involving
AR5K_EEPROM_N_PD_CURVES are not needed as the loop index is not
used outside the loops.
The patch is NOT tested with real device.
The following is the fuzzing report
BUG: KASAN: slab-out-of-bounds in ath5k_eeprom_read_pcal_info_5111+0x126a/0x1390 [ath5k]
Write of size 1 at addr ffff8880174a4d60 by task modprobe/214
CPU: 0 PID: 214 Comm: modprobe Not tainted 5.6.0 #1
Call Trace:
dump_stack+0x76/0xa0
print_address_description.constprop.0+0x16/0x200
? ath5k_eeprom_read_pcal_info_5111+0x126a/0x1390 [ath5k]
? ath5k_eeprom_read_pcal_info_5111+0x126a/0x1390 [ath5k]
__kasan_report.cold+0x37/0x7c
? ath5k_eeprom_read_pcal_info_5111+0x126a/0x1390 [ath5k]
kasan_report+0xe/0x20
ath5k_eeprom_read_pcal_info_5111+0x126a/0x1390 [ath5k]
? apic_timer_interrupt+0xa/0x20
? ath5k_eeprom_init_11a_pcal_freq+0xbc0/0xbc0 [ath5k]
? ath5k_pci_eeprom_read+0x228/0x3c0 [ath5k]
ath5k_eeprom_init+0x2513/0x6290 [ath5k]
? ath5k_eeprom_init_11a_pcal_freq+0xbc0/0xbc0 [ath5k]
? usleep_range+0xb8/0x100
? apic_timer_interrupt+0xa/0x20
? ath5k_eeprom_read_pcal_info_2413+0x2f20/0x2f20 [ath5k]
ath5k_hw_init+0xb60/0x1970 [ath5k]
ath5k_init_ah+0x6fe/0x2530 [ath5k]
? kasprintf+0xa6/0xe0
? ath5k_stop+0x140/0x140 [ath5k]
? _dev_notice+0xf6/0xf6
? apic_timer_interrupt+0xa/0x20
ath5k_pci_probe.cold+0x29a/0x3d6 [ath5k]
? ath5k_pci_eeprom_read+0x3c0/0x3c0 [ath5k]
? mutex_lock+0x89/0xd0
? ath5k_pci_eeprom_read+0x3c0/0x3c0 [ath5k]
local_pci_probe+0xd3/0x160
pci_device_probe+0x23f/0x3e0
? pci_device_remove+0x280/0x280
? pci_device_remove+0x280/0x280
really_probe+0x209/0x5d0
Reported-by: Brendan Dolan-Gavitt <brendandg@nyu.edu>
Signed-off-by: Zekun Shen <bruceshenzk@gmail.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/YckvDdj3mtCkDRIt@a-10-27-26-18.dynapool.vpn.nyu.edu
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0b464ca3e0 ]
Panel is 800x1280, but mounted on a laptop form factor, sideways.
Signed-off-by: Anisse Astier <anisse@astier.eu>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211229222200.53128-3-anisse@astier.eu
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a836839cbf ]
When RDTSCP is supported but RDPID is not supported in host,
RDPID emulation is available. However, __kvm_get_msr() would
only fail when RDTSCP/RDPID both are disabled in guest, so
the emulator wouldn't inject a #UD when RDPID is disabled but
RDTSCP is enabled in guest.
Fixes: fb6d4d340e ("KVM: x86: emulate RDPID")
Signed-off-by: Hou Wenlong <houwenlong.hwl@antgroup.com>
Message-Id: <1dfd46ae5b76d3ed87bde3154d51c64ea64c99c1.1646226788.git.houwenlong.hwl@antgroup.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9b026073db ]
AMD EPYC CPUs never raise a #GP for a WRMSR to a PerfEvtSeln MSR. Some
reserved bits are cleared, and some are not. Specifically, on
Zen3/Milan, bits 19 and 42 are not cleared.
When emulating such a WRMSR, KVM should not synthesize a #GP,
regardless of which bits are set. However, undocumented bits should
not be passed through to the hardware MSR. So, rather than checking
for reserved bits and synthesizing a #GP, just clear the reserved
bits.
This may seem pedantic, but since KVM currently does not support the
"Host/Guest Only" bits (41:40), it is necessary to clear these bits
rather than synthesizing #GP, because some popular guests (e.g Linux)
will set the "Host Only" bit even on CPUs that don't support
EFER.SVME, and they don't expect a #GP.
For example,
root@Ubuntu1804:~# perf stat -e r26 -a sleep 1
Performance counter stats for 'system wide':
0 r26
1.001070977 seconds time elapsed
Feb 23 03:59:58 Ubuntu1804 kernel: [ 405.379957] unchecked MSR access error: WRMSR to 0xc0010200 (tried to write 0x0000020000130026) at rIP: 0xffffffff9b276a28 (native_write_msr+0x8/0x30)
Feb 23 03:59:58 Ubuntu1804 kernel: [ 405.379958] Call Trace:
Feb 23 03:59:58 Ubuntu1804 kernel: [ 405.379963] amd_pmu_disable_event+0x27/0x90
Fixes: ca724305a2 ("KVM: x86/vPMU: Implement AMD vPMU code for KVM")
Reported-by: Lotus Fenn <lotusf@google.com>
Signed-off-by: Jim Mattson <jmattson@google.com>
Reviewed-by: Like Xu <likexu@tencent.com>
Reviewed-by: David Dunn <daviddunn@google.com>
Message-Id: <20220226234131.2167175-1-jmattson@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
